summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRalf Baechle <ralf@linux-mips.org>2009-03-30 16:49:44 +0400
committerRalf Baechle <ralf@linux-mips.org>2009-03-30 16:49:44 +0400
commitc87e09096dcd1ea3da8dfe434ee694fac51031c8 (patch)
treed988b5b545173c79ac013977720d62c7d26ec337
parent3e168ae286f5203d4b4aae0ae15c0d6282bcdd21 (diff)
downloadlinux-c87e09096dcd1ea3da8dfe434ee694fac51031c8.tar.xz
MIPS: Enable GENERIC_HARDIRQS_NO__DO_IRQ for all platforms
__do_IRQ() is deprecated and will go away. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-rw-r--r--arch/mips/Kconfig12
-rw-r--r--arch/mips/alchemy/Kconfig1
-rw-r--r--arch/mips/kernel/irq-msc01.c6
-rw-r--r--arch/mips/kernel/irq_cpu.c3
-rw-r--r--arch/mips/sgi-ip32/ip32-irq.c63
-rw-r--r--arch/mips/sibyte/bcm1480/irq.c2
-rw-r--r--arch/mips/sibyte/sb1250/irq.c2
-rw-r--r--arch/mips/sni/a20r.c2
-rw-r--r--arch/mips/sni/pcimt.c2
-rw-r--r--arch/mips/sni/pcit.c4
-rw-r--r--arch/mips/sni/rm200.c2
-rw-r--r--arch/mips/txx9/Kconfig1
12 files changed, 59 insertions, 41 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 206cb7953b0c..dc787190430a 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -77,7 +77,6 @@ config MIPS_COBALT
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
config MACH_DECSTATION
bool "DECstations"
@@ -132,7 +131,6 @@ config MACH_JAZZ
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_100HZ
- select GENERIC_HARDIRQS_NO__DO_IRQ
help
This a family of machines based on the MIPS R4030 chipset which was
used by several vendors to build RISC/os and Windows NT workstations.
@@ -154,7 +152,6 @@ config LASAT
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
select SYS_SUPPORTS_LITTLE_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
config LEMOTE_FULONG
bool "Lemote Fulong mini-PC"
@@ -175,7 +172,6 @@ config LEMOTE_FULONG
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select SYS_HAS_EARLY_PRINTK
- select GENERIC_HARDIRQS_NO__DO_IRQ
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select CPU_HAS_WB
help
@@ -250,7 +246,6 @@ config MACH_VR41XX
select CEVT_R4K
select CSRC_R4K
select SYS_HAS_CPU_VR41XX
- select GENERIC_HARDIRQS_NO__DO_IRQ
config NXP_STB220
bool "NXP STB220 board"
@@ -364,7 +359,6 @@ config SGI_IP27
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_SMP
- select GENERIC_HARDIRQS_NO__DO_IRQ
help
This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
workstations. To compile a Linux kernel that runs on these, say Y
@@ -563,7 +557,6 @@ config MIKROTIK_RB532
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
- select GENERIC_HARDIRQS_NO__DO_IRQ
select HW_HAS_PCI
select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1
@@ -700,8 +693,7 @@ config SCHED_OMIT_FRAME_POINTER
default y
config GENERIC_HARDIRQS_NO__DO_IRQ
- bool
- default n
+ def_bool y
#
# Select some configuration options automatically based on user selections.
@@ -920,7 +912,6 @@ config SOC_PNX833X
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
select GENERIC_GPIO
select CPU_MIPSR2_IRQ_VI
@@ -939,7 +930,6 @@ config SOC_PNX8550
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
- select GENERIC_HARDIRQS_NO__DO_IRQ
select GENERIC_GPIO
config SWAP_IO_SPACE
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index 2fc5c13e890f..8128aebfb155 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -134,5 +134,4 @@ config SOC_AU1X00
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_APM_EMULATION
- select GENERIC_HARDIRQS_NO__DO_IRQ
select ARCH_REQUIRE_GPIOLIB
diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c
index 963c16d266ab..6a8cd28133d5 100644
--- a/arch/mips/kernel/irq-msc01.c
+++ b/arch/mips/kernel/irq-msc01.c
@@ -140,14 +140,16 @@ void __init init_msc_irqs(unsigned long icubase, unsigned int irqbase, msc_irqma
switch (imp->im_type) {
case MSC01_IRQ_EDGE:
- set_irq_chip(irqbase+n, &msc_edgeirq_type);
+ set_irq_chip_and_handler_name(irqbase + n,
+ &msc_edgeirq_type, handle_edge_irq, "edge");
if (cpu_has_veic)
MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT);
else
MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT | imp->im_lvl);
break;
case MSC01_IRQ_LEVEL:
- set_irq_chip(irqbase+n, &msc_levelirq_type);
+ set_irq_chip_and_handler_name(irqbase+n,
+ &msc_levelirq_type, handle_level_irq, "level");
if (cpu_has_veic)
MSCIC_WRITE(MSC01_IC_SUP+n*8, 0);
else
diff --git a/arch/mips/kernel/irq_cpu.c b/arch/mips/kernel/irq_cpu.c
index 0ee2567b780d..55c8a3ca507b 100644
--- a/arch/mips/kernel/irq_cpu.c
+++ b/arch/mips/kernel/irq_cpu.c
@@ -112,7 +112,8 @@ void __init mips_cpu_irq_init(void)
*/
if (cpu_has_mipsmt)
for (i = irq_base; i < irq_base + 2; i++)
- set_irq_chip(i, &mips_mt_cpu_irq_controller);
+ set_irq_chip_and_handler(i, &mips_mt_cpu_irq_controller,
+ handle_percpu_irq);
for (i = irq_base + 2; i < irq_base + 8; i++)
set_irq_chip_and_handler(i, &mips_cpu_irq_controller,
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index 0d6b6663d5f6..0aefc5319a03 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -325,16 +325,11 @@ static void mask_and_ack_maceisa_irq(unsigned int irq)
{
unsigned long mace_int;
- switch (irq) {
- case MACEISA_PARALLEL_IRQ:
- case MACEISA_SERIAL1_TDMAPR_IRQ:
- case MACEISA_SERIAL2_TDMAPR_IRQ:
- /* edge triggered */
- mace_int = mace->perif.ctrl.istat;
- mace_int &= ~(1 << (irq - MACEISA_AUDIO_SW_IRQ));
- mace->perif.ctrl.istat = mace_int;
- break;
- }
+ /* edge triggered */
+ mace_int = mace->perif.ctrl.istat;
+ mace_int &= ~(1 << (irq - MACEISA_AUDIO_SW_IRQ));
+ mace->perif.ctrl.istat = mace_int;
+
disable_maceisa_irq(irq);
}
@@ -344,7 +339,16 @@ static void end_maceisa_irq(unsigned irq)
enable_maceisa_irq(irq);
}
-static struct irq_chip ip32_maceisa_interrupt = {
+static struct irq_chip ip32_maceisa_level_interrupt = {
+ .name = "IP32 MACE ISA",
+ .ack = disable_maceisa_irq,
+ .mask = disable_maceisa_irq,
+ .mask_ack = disable_maceisa_irq,
+ .unmask = enable_maceisa_irq,
+ .end = end_maceisa_irq,
+};
+
+static struct irq_chip ip32_maceisa_edge_interrupt = {
.name = "IP32 MACE ISA",
.ack = mask_and_ack_maceisa_irq,
.mask = disable_maceisa_irq,
@@ -500,27 +504,50 @@ void __init arch_init_irq(void)
for (irq = CRIME_IRQ_BASE; irq <= IP32_IRQ_MAX; irq++) {
switch (irq) {
case MACE_VID_IN1_IRQ ... MACE_PCI_BRIDGE_IRQ:
- set_irq_chip(irq, &ip32_mace_interrupt);
+ set_irq_chip_and_handler_name(irq,&ip32_mace_interrupt,
+ handle_level_irq, "level");
break;
+
case MACEPCI_SCSI0_IRQ ... MACEPCI_SHARED2_IRQ:
- set_irq_chip(irq, &ip32_macepci_interrupt);
+ set_irq_chip_and_handler_name(irq,
+ &ip32_macepci_interrupt, handle_level_irq,
+ "level");
break;
+
case CRIME_GBE0_IRQ ... CRIME_GBE3_IRQ:
- set_irq_chip(irq, &crime_edge_interrupt);
+ set_irq_chip_and_handler_name(irq,
+ &crime_edge_interrupt, handle_edge_irq, "edge");
break;
case CRIME_CPUERR_IRQ:
case CRIME_MEMERR_IRQ:
- set_irq_chip(irq, &crime_level_interrupt);
+ set_irq_chip_and_handler_name(irq,
+ &crime_level_interrupt, handle_level_irq,
+ "level");
break;
+
case CRIME_RE_EMPTY_E_IRQ ... CRIME_RE_IDLE_E_IRQ:
case CRIME_SOFT0_IRQ ... CRIME_SOFT2_IRQ:
- set_irq_chip(irq, &crime_edge_interrupt);
+ set_irq_chip_and_handler_name(irq,
+ &crime_edge_interrupt, handle_edge_irq, "edge");
break;
+
case CRIME_VICE_IRQ:
- set_irq_chip(irq, &crime_edge_interrupt);
+ set_irq_chip_and_handler_name(irq,
+ &crime_edge_interrupt, handle_edge_irq, "edge");
+ break;
+
+ case MACEISA_PARALLEL_IRQ:
+ case MACEISA_SERIAL1_TDMAPR_IRQ:
+ case MACEISA_SERIAL2_TDMAPR_IRQ:
+ set_irq_chip_and_handler_name(irq,
+ &ip32_maceisa_edge_interrupt, handle_edge_irq,
+ "edge");
break;
+
default:
- set_irq_chip(irq, &ip32_maceisa_interrupt);
+ set_irq_chip_and_handler_name(irq,
+ &ip32_maceisa_level_interrupt, handle_level_irq,
+ "level");
break;
}
}
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index 12b465d404df..352352b3cb2f 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -236,7 +236,7 @@ void __init init_bcm1480_irqs(void)
int i;
for (i = 0; i < BCM1480_NR_IRQS; i++) {
- set_irq_chip(i, &bcm1480_irq_type);
+ set_irq_chip_and_handler(i, &bcm1480_irq_type, handle_level_irq);
bcm1480_irq_owner[i] = 0;
}
}
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 808ac2959b8c..c08ff582da6f 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -220,7 +220,7 @@ void __init init_sb1250_irqs(void)
int i;
for (i = 0; i < SB1250_NR_IRQS; i++) {
- set_irq_chip(i, &sb1250_irq_type);
+ set_irq_chip_and_handler(i, &sb1250_irq_type, handle_level_irq);
sb1250_irq_owner[i] = 0;
}
}
diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
index 3f8cf5eb2f06..7dd76fb3b645 100644
--- a/arch/mips/sni/a20r.c
+++ b/arch/mips/sni/a20r.c
@@ -219,7 +219,7 @@ void __init sni_a20r_irq_init(void)
int i;
for (i = SNI_A20R_IRQ_BASE + 2 ; i < SNI_A20R_IRQ_BASE + 8; i++)
- set_irq_chip(i, &a20r_irq_type);
+ set_irq_chip_and_handler(i, &a20r_irq_type, handle_level_irq);
sni_hwint = a20r_hwint;
change_c0_status(ST0_IM, IE_IRQ0);
setup_irq(SNI_A20R_IRQ_BASE + 3, &sni_isa_irq);
diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c
index 834650f371e0..74e6c67982fb 100644
--- a/arch/mips/sni/pcimt.c
+++ b/arch/mips/sni/pcimt.c
@@ -304,7 +304,7 @@ void __init sni_pcimt_irq_init(void)
mips_cpu_irq_init();
/* Actually we've got more interrupts to handle ... */
for (i = PCIMT_IRQ_INT2; i <= PCIMT_IRQ_SCSI; i++)
- set_irq_chip(i, &pcimt_irq_type);
+ set_irq_chip_and_handler(i, &pcimt_irq_type, handle_level_irq);
sni_hwint = sni_pcimt_hwint;
change_c0_status(ST0_IM, IE_IRQ1|IE_IRQ3);
}
diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c
index e5f12cf96e8e..071a9573ac7f 100644
--- a/arch/mips/sni/pcit.c
+++ b/arch/mips/sni/pcit.c
@@ -246,7 +246,7 @@ void __init sni_pcit_irq_init(void)
mips_cpu_irq_init();
for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++)
- set_irq_chip(i, &pcit_irq_type);
+ set_irq_chip_and_handler(i, &pcit_irq_type, handle_level_irq);
*(volatile u32 *)SNI_PCIT_INT_REG = 0;
sni_hwint = sni_pcit_hwint;
change_c0_status(ST0_IM, IE_IRQ1);
@@ -259,7 +259,7 @@ void __init sni_pcit_cplus_irq_init(void)
mips_cpu_irq_init();
for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++)
- set_irq_chip(i, &pcit_irq_type);
+ set_irq_chip_and_handler(i, &pcit_irq_type, handle_level_irq);
*(volatile u32 *)SNI_PCIT_INT_REG = 0x40000000;
sni_hwint = sni_pcit_hwint_cplus;
change_c0_status(ST0_IM, IE_IRQ0);
diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c
index 5310aa75afa4..b4352a0c8151 100644
--- a/arch/mips/sni/rm200.c
+++ b/arch/mips/sni/rm200.c
@@ -487,7 +487,7 @@ void __init sni_rm200_irq_init(void)
mips_cpu_irq_init();
/* Actually we've got more interrupts to handle ... */
for (i = SNI_RM200_INT_START; i <= SNI_RM200_INT_END; i++)
- set_irq_chip(i, &rm200_irq_type);
+ set_irq_chip_and_handler(i, &rm200_irq_type, handle_level_irq);
sni_hwint = sni_rm200_hwint;
change_c0_status(ST0_IM, IE_IRQ0);
setup_irq(SNI_RM200_INT_START + 0, &sni_rm200_i8259A_irq);
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 226e8bb2f0a1..0db7cf38ed8b 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -20,7 +20,6 @@ config MACH_TXX9
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_BIG_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
config TOSHIBA_JMR3927
bool "Toshiba JMR-TX3927 board"