Merge tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver updates for 4.15-rc1.

  There is the usual amount of gadget and xhci driver updates, along
  with phy and chipidea enhancements. There's also a lot of SPDX tags
  and license boilerplate cleanups as well, which provide some churn in
  the diffstat.

  Other major thing is the typec code that moved out of staging and into
  the "real" part of the drivers/usb/ tree, which was nice to see
  happen.

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
  usb: gadget: f_fs: Fix use-after-free in ffs_free_inst
  USB: usbfs: compute urb->actual_length for isochronous
  usb: core: message: remember to reset 'ret' to 0 when necessary
  USB: typec: Remove remaining redundant license text
  USB: typec: add SPDX identifiers to some files
  USB: renesas_usbhs: rcar?.h: add SPDX tags
  USB: chipidea: ci_hdrc_tegra.c: add SPDX line
  USB: host: xhci-debugfs: add SPDX lines
  USB: add SPDX identifiers to all remaining Makefiles
  usb: host: isp1362-hcd: remove a couple of redundant assignments
  USB: adutux: remove redundant variable minor
  usb: core: add a new usb_get_ptm_status() helper
  usb: core: add a 'type' parameter to usb_get_status()
  usb: core: introduce a new usb_get_std_status() helper
  usb: core: rename usb_get_status() 'type' argument to 'recip'
  usb: core: add Status Type definitions
  USB: gadget: Remove redundant license text
  USB: gadget: function: Remove redundant license text
  USB: gadget: udc: Remove redundant license text
  USB: gadget: legacy: Remove redundant license text
  ...

764 files changed, 6609 insertions, 9083 deletions

diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
new file mode 100644
index 000000000000..24a0d06acd1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt
@@ -0,0 +1,43 @@
+Broadcom STB USB PHY
+
+Required properties:
+ - compatible: brcm,brcmstb-usb-phy
+ - reg: two offset and length pairs.
+	The first pair specifies a manditory set of memory mapped
+	registers used for general control of the PHY.
+	The second pair specifies optional registers used by some of
+	the SoCs that support USB 3.x
+ - #phy-cells: Shall be 1 as it expects one argument for setting
+	       the type of the PHY. Possible values are:
+	       - PHY_TYPE_USB2 for USB1.1/2.0 PHY
+	       - PHY_TYPE_USB3 for USB3.x PHY
+
+Optional Properties:
+- clocks : clock phandles.
+- clock-names: String, clock name.
+- brcm,ipp: Boolean, Invert Port Power.
+  Possible values are: 0 (Don't invert), 1 (Invert)
+- brcm,ioc: Boolean, Invert Over Current detection.
+  Possible values are: 0 (Don't invert), 1 (Invert)
+NOTE: one or both of the following two properties must be set
+- brcm,has-xhci: Boolean indicating the phy has an XHCI phy.
+- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy.
+- dr_mode: String, PHY Device mode.
+  Possible values are: "host", "peripheral ", "drd" or "typec-pd"
+  If this property is not defined, the phy will default to "host" mode.
+
+Example:
+
+usbphy_0: usb-phy@f0470200 {
+	reg = <0xf0470200 0xb8>,
+		<0xf0471940 0x6c0>;
+	compatible = "brcm,brcmstb-usb-phy";
+	#phy-cells = <1>;
+	dr_mode = "host"
+	brcm,ioc = <1>;
+	brcm,ipp = <1>;
+	brcm,has-xhci;
+	brcm,has-eohci;
+	clocks = <&usb20>, <&usb30>;
+	clock-names = "sw_usb", "sw_usb3";
+};
diff --git a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
index 97977cd29a98..0aced97d8092 100644
--- a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
+++ b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
@@ -27,7 +27,16 @@ Sub-nodes optional properties:
      This property is not applicable for "brcm,iproc-ns2-sata-phy",
      "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy".
 
-Example:
+- brcm,rxaeq-mode: string that indicates the desired RX equalizer
+  mode, possible values are:
+	"off" (equivalent to not specifying the property)
+	"auto"
+	"manual" (brcm,rxaeq-value is used in that case)
+
+- brcm,rxaeq-value: when 'rxaeq-mode' is set to "manual", provides the RX
+  equalizer value that should be used. Allowed range is 0..63.
+
+Example
 	sata-phy@f0458100 {
 		compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
 		reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>;
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
index 91da947ae9b6..eeb9e1874ea6 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
@@ -4,10 +4,13 @@ This file provides information on what the device node for the R-Car generation
 2 USB PHY contains.
 
 Required properties:
-- compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
+- compatible: "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC.
+	      "renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC.
+	      "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
 	      "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC.
 	      "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC.
-	      "renesas,rcar-gen2-usb-phy" for a generic R-Car Gen2 compatible device.
+	      "renesas,rcar-gen2-usb-phy" for a generic R-Car Gen2 or
+					  RZ/G1 compatible device.
 
 	      When compatible with the generic version, nodes must list the
 	      SoC-specific version corresponding to the platform first
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
index ace9cce2704a..99b651b33110 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
@@ -8,6 +8,8 @@ Required properties:
 	      SoC.
 	      "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796
 	      SoC.
+	      "renesas,usb2-phy-r8a77995" if the device is a part of an
+	      R8A77995 SoC.
 	      "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device.
 
 	      When compatible with the generic version, nodes must list the
diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index fcf199b64d3d..e64d903bcbe8 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -19,6 +19,8 @@ Required properties:
   configured in FS mode;
   - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs
   configured in HS mode;
+  - "st,stm32f7xx-hsotg": The DWC2 USB HS controller instance in STM32F7xx SoCs
+    configured in HS mode;
 - reg : Should contain 1 register range (address and length)
 - interrupts : Should contain 1 interrupt
 - clocks: clock provider specifier
diff --git a/Documentation/devicetree/bindings/usb/maxim,max3421.txt b/Documentation/devicetree/bindings/usb/maxim,max3421.txt
new file mode 100644
index 000000000000..8cdbe0c85188
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/maxim,max3421.txt
@@ -0,0 +1,26 @@
+Maxim Integrated SPI-based USB 2.0 host controller MAX3421E
+
+Required properties:
+ - compatible: Should be "maxim,max3421"
+ - spi-max-frequency: maximum frequency for this device must not exceed 26 MHz.
+ - reg: chip select number to which this device is connected.
+ - maxim,vbus-en-pin: <GPOUTx ACTIVE_LEVEL>
+   GPOUTx is the number (1-8) of the GPOUT pin of MAX3421E to drive Vbus.
+   ACTIVE_LEVEL is 0 or 1.
+ - interrupts: the interrupt line description for the interrupt controller.
+   The driver configures MAX3421E for active low level triggered interrupts,
+   configure your interrupt line accordingly.
+
+Optional property:
+ - interrupt-parent: the phandle to the associated interrupt controller.
+
+Example:
+
+	usb@0 {
+		compatible = "maxim,max3421";
+		reg = <0>;
+		maxim,vbus-en-pin = <3 1>;
+		spi-max-frequency = <26000000>;
+		interrupt-parent = <&PIC>;
+		interrupts = <42>;
+	};
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
index 5611a2e4ddf0..30595964876a 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
@@ -26,10 +26,11 @@ Required properties:
  - clocks : a list of phandle + clock-specifier pairs, one for each
 	entry in clock-names
  - clock-names : must contain
-	"sys_ck": for clock of xHCI MAC
-	"ref_ck": for reference clock of xHCI MAC
-	"wakeup_deb_p0": for USB wakeup debounce clock of port0
-	"wakeup_deb_p1": for USB wakeup debounce clock of port1
+	"sys_ck": controller clock used by normal mode,
+	the following ones are optional:
+	"ref_ck": reference clock used by low power mode etc,
+	"mcu_ck": mcu_bus clock for register access,
+	"dma_ck": dma_bus clock for data transfer by DMA
 
  - phys : a list of phandle + phy specifier pairs
 
@@ -38,6 +39,8 @@ Optional properties:
 	mode;
  - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup
 	control register, it depends on "mediatek,wakeup-src".
+ - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
+	bit1 for u3port1, ... etc;
  - vbus-supply : reference to the VBUS regulator;
  - usb3-lpm-capable : supports USB3.0 LPM
  - pinctrl-names : a pinctrl state named "default" must be defined
@@ -55,9 +58,7 @@ usb30: usb@11270000 {
 	clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
 		 <&pericfg CLK_PERI_USB0>,
 		 <&pericfg CLK_PERI_USB1>;
-	clock-names = "sys_ck", "ref_ck",
-		      "wakeup_deb_p0",
-		      "wakeup_deb_p1";
+	clock-names = "sys_ck", "ref_ck";
 	phys = <&phy_port0 PHY_TYPE_USB3>,
 	       <&phy_port1 PHY_TYPE_USB2>;
 	vusb33-supply = <&mt6397_vusb_reg>;
@@ -89,9 +90,8 @@ Required properties:
 
  - clocks : a list of phandle + clock-specifier pairs, one for each
 	entry in clock-names
- - clock-names : must be
-	"sys_ck": for clock of xHCI MAC
-	"ref_ck": for reference clock of xHCI MAC
+ - clock-names : must contain "sys_ck", and the following ones are optional:
+	"ref_ck", "mcu_ck" and "dma_ck"
 
 Optional properties:
  - vbus-supply : reference to the VBUS regulator;
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
index 49f54767cd21..b2271d8e6b50 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
@@ -14,9 +14,9 @@ Required properties:
  - vusb33-supply : regulator of USB avdd3.3v
  - clocks : a list of phandle + clock-specifier pairs, one for each
 	entry in clock-names
- - clock-names : must contain "sys_ck" and "ref_ck" for clock of controller;
-	"wakeup_deb_p0" and "wakeup_deb_p1" are optional, they are
-	depends on "mediatek,enable-wakeup"
+ - clock-names : must contain "sys_ck" for clock of controller,
+	the following clocks are optional:
+	"ref_ck", "mcu_ck" and "dam_ck";
  - phys : a list of phandle + phy specifier pairs
  - dr_mode : should be one of "host", "peripheral" or "otg",
 	refer to usb/generic.txt
@@ -30,9 +30,10 @@ Optional properties:
 	when supports dual-role mode.
  - vbus-supply : reference to the VBUS regulator, needed when supports
 	dual-role mode.
- - pinctl-names : a pinctrl state named "default" must be defined,
-	"id_float" and "id_ground" are optinal which depends on
-	"mediatek,enable-manual-drd"
+ - pinctrl-names : a pinctrl state named "default" is optional, and need be
+	defined if auto drd switch is enabled, that means the property dr_mode
+	is set as "otg", and meanwhile the property "mediatek,enable-manual-drd"
+	is not set.
  - pinctrl-0 : pin control group
 	See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
 
@@ -44,6 +45,8 @@ Optional properties:
  - mediatek,enable-wakeup : supports ip sleep wakeup used by host mode
  - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup
 	control register, it depends on "mediatek,enable-wakeup".
+ - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
+	bit1 for u3port1, ... etc;
 
 Sub-nodes:
 The xhci should be added as subnode to mtu3 as shown in the following example
@@ -63,9 +66,7 @@ ssusb: usb@11271000 {
 	clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
 		 <&pericfg CLK_PERI_USB0>,
 		 <&pericfg CLK_PERI_USB1>;
-	clock-names = "sys_ck", "ref_ck",
-		      "wakeup_deb_p0",
-		      "wakeup_deb_p1";
+	clock-names = "sys_ck", "ref_ck";
 	vusb33-supply = <&mt6397_vusb_reg>;
 	vbus-supply = <&usb_p0_vbus>;
 	extcon = <&extcon_usb>;
diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
index e28025883b79..87a45e2f9b7f 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
@@ -15,6 +15,10 @@ Required properties:
   - interrupts: Interrupt specifier for the USB3.0 Peripheral
   - clocks: clock phandle and specifier pair
 
+Optional properties:
+  - phys: phandle + phy specifier pair
+  - phy-names: must be "usb"
+
 Example of R-Car H3 ES1.x:
 	usb3_peri0: usb@ee020000 {
 		compatible = "renesas,r8a7795-usb3-peri",
diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
index 9e18e000339e..47394ab788e3 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -3,6 +3,8 @@ Renesas Electronics USBHS driver
 Required properties:
   - compatible: Must contain one or more of the following:
 
+	- "renesas,usbhs-r8a7743" for r8a7743 (RZ/G1M) compatible device
+	- "renesas,usbhs-r8a7745" for r8a7745 (RZ/G1E) compatible device
 	- "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device
 	- "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device
 	- "renesas,usbhs-r8a7792" for r8a7792 (R-Car V2H) compatible device
@@ -10,7 +12,8 @@ Required properties:
 	- "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device
 	- "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device
 	- "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device
-	- "renesas,rcar-gen2-usbhs" for R-Car Gen2 compatible device
+	- "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device
+	- "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices
 	- "renesas,rcar-gen3-usbhs" for R-Car Gen3 compatible device
 
 	When compatible with the generic version, nodes must list the
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index 2d80b60eeabe..ae6e484a8d7c 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -26,6 +26,7 @@ Required properties:
 
 Optional properties:
   - clocks: reference to a clock
+  - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
   - usb3-lpm-capable: determines if platform is USB3 LPM capable
   - quirk-broken-port-ped: set if the controller has broken port disable mechanism
 
diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
index 3957d4edaa74..168ff819e827 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.txt
+++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
@@ -1,16 +1,17 @@
 Microchip USB 2.0 Hi-Speed Hub Controller
 
-The device node for the configuration of a Microchip USB251xB/xBi USB 2.0
+The device node for the configuration of a Microchip USB251x/xBi USB 2.0
 Hi-Speed Controller.
 
 Required properties :
  - compatible : Should be "microchip,usb251xb" or one of the specific types:
 	"microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b",
-	"microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi"
- - reset-gpios : Should specify the gpio for hub reset
+	"microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi",
+	"microchip,usb2517", "microchip,usb2517i"
  - reg : I2C address on the selected bus (default is <0x2C>)
 
 Optional properties :
+ - reset-gpios : Should specify the gpio for hub reset
  - skip-config : Skip Hub configuration, but only send the USB-Attach command
  - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424)
  - product-id : Set USB Product ID of the hub (16 bit, default depends on type)
@@ -19,29 +20,47 @@ Optional properties :
  - manufacturer : Set USB Manufacturer string (max 31 characters long)
  - product : Set USB Product string (max 31 characters long)
  - serial : Set USB Serial string (max 31 characters long)
- - {bus,self}-powered : selects between self- and bus-powered operation (default
-	is self-powered)
- - disable-hi-speed : disable USB Hi-Speed support
+ - {bus,self}-powered : selects between self- and bus-powered operation
+	(boolean, default is self-powered)
+ - disable-hi-speed : disable USB Hi-Speed support (boolean)
  - {multi,single}-tt : selects between multi- and single-transaction-translator
-	(default is multi-tt)
- - disable-eop : disable End of Packet generation in full-speed mode
+	(boolean, default is multi-tt)
+ - disable-eop : disable End of Packet generation in full-speed mode (boolean)
  - {ganged,individual}-sensing : select over-current sense type in self-powered
-	mode (default is individual)
+	mode (boolean, default is individual)
  - {ganged,individual}-port-switching : select port power switching mode
-	(default is individual)
+	(boolean, default is individual)
  - dynamic-power-switching : enable auto-switching from self- to bus-powered
-	operation if the local power source is removed or unavailable
+	operation if the local power source is removed or unavailable (boolean)
  - oc-delay-us : Delay time (in microseconds) for filtering the over-current
 	sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If
 	an invalid value is given, the default is used instead.
- - compound-device : indicate the hub is part of a compound device
- - port-mapping-mode : enable port mapping mode
+ - compound-device : indicate the hub is part of a compound device (boolean)
+ - port-mapping-mode : enable port mapping mode (boolean)
+ - led-{usb,speed}-mode : led usb/speed indication mode selection
+	(boolean, default is speed mode)
  - string-support : enable string descriptor support (required for manufacturer,
 	product and serial string configuration)
  - non-removable-ports : Should specify the ports which have a non-removable
 	device connected.
  - sp-disabled-ports : Specifies the ports which will be self-power disabled
  - bp-disabled-ports : Specifies the ports which will be bus-power disabled
+ - sp-max-total-current-microamp: Specifies max current consumed by the hub
+	from VBUS when operating in self-powered hub. It includes the hub
+	silicon along with all associated circuitry including a permanently
+	attached peripheral (range: 0 - 100000 uA, default 1000 uA)
+ - bp-max-total-current-microamp: Specifies max current consumed by the hub
+	from VBUS when operating in self-powered hub. It includes the hub
+	silicon along with all associated circuitry including a permanently
+	attached peripheral (range: 0 - 510000 uA, default 100000 uA)
+ - sp-max-removable-current-microamp: Specifies max current consumed by the hub
+	from VBUS when operating in self-powered hub. It includes the hub
+	silicon along with all associated circuitry excluding a permanently
+	attached peripheral (range: 0 - 100000 uA, default 1000 uA)
+ - bp-max-removable-current-microamp: Specifies max current consumed by the hub
+	from VBUS when operating in self-powered hub. It includes the hub
+	silicon along with all associated circuitry excluding a permanently
+	attached peripheral (range: 0 - 510000 uA, default 100000 uA)
  - power-on-time-ms : Specifies the time it takes from the time the host
 	initiates the power-on sequence to a port until the port has adequate
 	power. The value is given in ms in a 0 - 510 range (default is 100ms).
@@ -56,7 +75,6 @@ Examples:
 	usb2514b@2c {
 		compatible = "microchip,usb2514b";
 		reg = <0x2c>;
-		reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 		vendor-id = /bits/ 16 <0x0000>;
 		product-id = /bits/ 16 <0x0000>;
 		string-support;
diff --git a/MAINTAINERS b/MAINTAINERS
index ee5d9d2aabb1..650aa0e0e9d8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2896,6 +2896,13 @@ S:	Supported
 F:	drivers/gpio/gpio-brcmstb.c
 F:	Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
 
+BROADCOM BRCMSTB USB2 and USB3 PHY DRIVER
+M:	Al Cooper <alcooperx@gmail.com>
+L:	linux-kernel@vger.kernel.org
+L:	bcm-kernel-feedback-list@broadcom.com
+S:	Maintained
+F:	drivers/phy/broadcom/phy-brcm-usb*
+
 BROADCOM GENET ETHERNET DRIVER
 M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	netdev@vger.kernel.org
diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c
index 6f6537ab0a79..3877d86c746a 100644
--- a/drivers/extcon/extcon-adc-jack.c
+++ b/drivers/extcon/extcon-adc-jack.c
@@ -26,7 +26,7 @@
 #include <linux/workqueue.h>
 #include <linux/iio/consumer.h>
 #include <linux/extcon/extcon-adc-jack.h>
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 
 /**
  * struct adc_jack_data - internal data for adc_jack device driver
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index f84da4a17724..da0e9bc4262f 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -27,7 +27,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/property.h>
 #include <linux/regulator/consumer.h>
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 
 #include <sound/soc.h>
 
diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
index f4fd03e58e37..981fba56bc18 100644
--- a/drivers/extcon/extcon-axp288.c
+++ b/drivers/extcon/extcon-axp288.c
@@ -22,7 +22,7 @@
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/notifier.h>
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 #include <linux/regmap.h>
 #include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index ebed22f22d75..ab770adcca7e 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -17,7 +17,7 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 #include <linux/extcon/extcon-gpio.h>
 #include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c
index 91a0023074af..7c4bc8c44c3f 100644
--- a/drivers/extcon/extcon-intel-cht-wc.c
+++ b/drivers/extcon/extcon-intel-cht-wc.c
@@ -15,7 +15,7 @@
  * more details.
  */
 
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/mfd/intel_soc_pmic.h>
diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c
index 1a45e745717d..c8691b5a9cb0 100644
--- a/drivers/extcon/extcon-intel-int3496.c
+++ b/drivers/extcon/extcon-intel-int3496.c
@@ -19,7 +19,7 @@
  */
 
 #include <linux/acpi.h>
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
diff --git a/drivers/extcon/extcon-max14577.c b/drivers/extcon/extcon-max14577.c
index f6414b7fa5bc..b871836da8a4 100644
--- a/drivers/extcon/extcon-max14577.c
+++ b/drivers/extcon/extcon-max14577.c
@@ -23,7 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/mfd/max14577.h>
 #include <linux/mfd/max14577-private.h>
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 
 #define	DELAY_MS_DEFAULT		17000		/* unit: millisecond */
 
@@ -204,8 +204,8 @@ static int max14577_muic_set_debounce_time(struct max14577_muic_info *info,
 static int max14577_muic_set_path(struct max14577_muic_info *info,
 		u8 val, bool attached)
 {
-	int ret = 0;
 	u8 ctrl1, ctrl2 = 0;
+	int ret;
 
 	/* Set open state to path before changing hw path */
 	ret = max14577_update_reg(info->max14577->regmap,
diff --git a/drivers/extcon/extcon-max3355.c b/drivers/extcon/extcon-max3355.c
index 533e16a952b8..0aa410836f4e 100644
--- a/drivers/extcon/extcon-max3355.c
+++ b/drivers/extcon/extcon-max3355.c
@@ -9,7 +9,7 @@
  * may be copied, distributed, and modified under those terms.
  */
 
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 #include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index 7a5856809047..643411066ad9 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -26,7 +26,7 @@
 #include <linux/mfd/max77693.h>
 #include <linux/mfd/max77693-common.h>
 #include <linux/mfd/max77693-private.h>
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 #include <linux/regmap.h>
 #include <linux/irqdomain.h>
 
diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
index 6e722d552cf1..c9fcd6cd41cb 100644
--- a/drivers/extcon/extcon-max77843.c
+++ b/drivers/extcon/extcon-max77843.c
@@ -11,7 +11,7 @@
  * (at your option) any later version.
  */
 
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -80,7 +80,7 @@ enum max77843_muic_accessory_type {
 	MAX77843_MUIC_ADC_REMOTE_S12_BUTTON,
 	MAX77843_MUIC_ADC_RESERVED_ACC_1,
 	MAX77843_MUIC_ADC_RESERVED_ACC_2,
-	MAX77843_MUIC_ADC_RESERVED_ACC_3,
+	MAX77843_MUIC_ADC_RESERVED_ACC_3, /* SmartDock */
 	MAX77843_MUIC_ADC_RESERVED_ACC_4,
 	MAX77843_MUIC_ADC_RESERVED_ACC_5,
 	MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2,
@@ -119,6 +119,7 @@ enum max77843_muic_charger_type {
 	MAX77843_MUIC_CHG_SPECIAL_BIAS,
 	MAX77843_MUIC_CHG_RESERVED,
 	MAX77843_MUIC_CHG_GND,
+	MAX77843_MUIC_CHG_DOCK,
 };
 
 static const unsigned int max77843_extcon_cable[] = {
@@ -130,6 +131,7 @@ static const unsigned int max77843_extcon_cable[] = {
 	EXTCON_CHG_USB_FAST,
 	EXTCON_CHG_USB_SLOW,
 	EXTCON_DISP_MHL,
+	EXTCON_DOCK,
 	EXTCON_JIG,
 	EXTCON_NONE,
 };
@@ -200,7 +202,7 @@ static const struct regmap_irq_chip max77843_muic_irq_chip = {
 };
 
 static int max77843_muic_set_path(struct max77843_muic_info *info,
-		u8 val, bool attached)
+		u8 val, bool attached, bool nobccomp)
 {
 	struct max77693_dev *max77843 = info->max77843;
 	int ret = 0;
@@ -210,10 +212,16 @@ static int max77843_muic_set_path(struct max77843_muic_info *info,
 		ctrl1 = val;
 	else
 		ctrl1 = MAX77843_MUIC_CONTROL1_SW_OPEN;
+	if (nobccomp) {
+		/* Disable BC1.2 protocol and force manual switch control */
+		ctrl1 |= MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK;
+	}
 
 	ret = regmap_update_bits(max77843->regmap_muic,
 			MAX77843_MUIC_REG_CONTROL1,
-			MAX77843_MUIC_CONTROL1_COM_SW, ctrl1);
+			MAX77843_MUIC_CONTROL1_COM_SW |
+				MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK,
+			ctrl1);
 	if (ret < 0) {
 		dev_err(info->dev, "Cannot switch MUIC port\n");
 		return ret;
@@ -240,6 +248,21 @@ static int max77843_muic_set_path(struct max77843_muic_info *info,
 	return 0;
 }
 
+static void max77843_charger_set_otg_vbus(struct max77843_muic_info *info,
+		 bool on)
+{
+	struct max77693_dev *max77843 = info->max77843;
+	unsigned int cnfg00;
+
+	if (on)
+		cnfg00 = MAX77843_CHG_OTG_MASK | MAX77843_CHG_BOOST_MASK;
+	else
+		cnfg00 = MAX77843_CHG_ENABLE | MAX77843_CHG_BUCK_MASK;
+
+	regmap_update_bits(max77843->regmap_chg, MAX77843_CHG_REG_CHG_CNFG_00,
+			   MAX77843_CHG_MODE_MASK, cnfg00);
+}
+
 static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
 		enum max77843_muic_cable_group group, bool *attached)
 {
@@ -288,6 +311,19 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info,
 			break;
 		}
 
+		if (adc == MAX77843_MUIC_ADC_RESERVED_ACC_3) { /* SmartDock */
+			if (chg_type == MAX77843_MUIC_CHG_NONE) {
+				*attached = false;
+				cable_type = info->prev_chg_type;
+				info->prev_chg_type = MAX77843_MUIC_CHG_NONE;
+			} else {
+				*attached = true;
+				cable_type = MAX77843_MUIC_CHG_DOCK;
+				info->prev_chg_type = MAX77843_MUIC_CHG_DOCK;
+			}
+			break;
+		}
+
 		if (chg_type == MAX77843_MUIC_CHG_NONE) {
 			*attached = false;
 			cable_type = info->prev_chg_type;
@@ -350,17 +386,18 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
 	case MAX77843_MUIC_GND_USB_HOST_VB:
 		ret = max77843_muic_set_path(info,
 					     MAX77843_MUIC_CONTROL1_SW_USB,
-					     attached);
+					     attached, false);
 		if (ret < 0)
 			return ret;
 
 		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
+		max77843_charger_set_otg_vbus(info, attached);
 		break;
 	case MAX77843_MUIC_GND_MHL_VB:
 	case MAX77843_MUIC_GND_MHL:
 		ret = max77843_muic_set_path(info,
 					     MAX77843_MUIC_CONTROL1_SW_OPEN,
-					     attached);
+					     attached, false);
 		if (ret < 0)
 			return ret;
 
@@ -396,7 +433,7 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
 		return -EINVAL;
 	}
 
-	ret = max77843_muic_set_path(info, path, attached);
+	ret = max77843_muic_set_path(info, path, attached, false);
 	if (ret < 0)
 		return ret;
 
@@ -405,6 +442,26 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
 	return 0;
 }
 
+static int max77843_muic_dock_handler(struct max77843_muic_info *info,
+		bool attached)
+{
+	int ret;
+
+	dev_dbg(info->dev, "external connector is %s (adc: 0x10)\n",
+			attached ? "attached" : "detached");
+
+	ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_USB,
+				     attached, attached);
+	if (ret < 0)
+		return ret;
+
+	extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached);
+	extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached);
+	extcon_set_state_sync(info->edev, EXTCON_DOCK, attached);
+
+	return 0;
+}
+
 static int max77843_muic_adc_handler(struct max77843_muic_info *info)
 {
 	int ret, cable_type;
@@ -419,6 +476,11 @@ static int max77843_muic_adc_handler(struct max77843_muic_info *info)
 		info->prev_cable_type);
 
 	switch (cable_type) {
+	case MAX77843_MUIC_ADC_RESERVED_ACC_3: /* SmartDock */
+		ret = max77843_muic_dock_handler(info, attached);
+		if (ret < 0)
+			return ret;
+		break;
 	case MAX77843_MUIC_ADC_GROUND:
 		ret = max77843_muic_adc_gnd_handler(info);
 		if (ret < 0)
@@ -446,7 +508,6 @@ static int max77843_muic_adc_handler(struct max77843_muic_info *info)
 	case MAX77843_MUIC_ADC_REMOTE_S12_BUTTON:
 	case MAX77843_MUIC_ADC_RESERVED_ACC_1:
 	case MAX77843_MUIC_ADC_RESERVED_ACC_2:
-	case MAX77843_MUIC_ADC_RESERVED_ACC_3:
 	case MAX77843_MUIC_ADC_RESERVED_ACC_4:
 	case MAX77843_MUIC_ADC_RESERVED_ACC_5:
 	case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2:
@@ -490,7 +551,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 	case MAX77843_MUIC_CHG_USB:
 		ret = max77843_muic_set_path(info,
 					     MAX77843_MUIC_CONTROL1_SW_USB,
-					     attached);
+					     attached, false);
 		if (ret < 0)
 			return ret;
 
@@ -501,7 +562,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 	case MAX77843_MUIC_CHG_DOWNSTREAM:
 		ret = max77843_muic_set_path(info,
 					     MAX77843_MUIC_CONTROL1_SW_OPEN,
-					     attached);
+					     attached, false);
 		if (ret < 0)
 			return ret;
 
@@ -511,7 +572,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 	case MAX77843_MUIC_CHG_DEDICATED:
 		ret = max77843_muic_set_path(info,
 					     MAX77843_MUIC_CONTROL1_SW_OPEN,
-					     attached);
+					     attached, false);
 		if (ret < 0)
 			return ret;
 
@@ -521,7 +582,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 	case MAX77843_MUIC_CHG_SPECIAL_500MA:
 		ret = max77843_muic_set_path(info,
 					     MAX77843_MUIC_CONTROL1_SW_OPEN,
-					     attached);
+					     attached, false);
 		if (ret < 0)
 			return ret;
 
@@ -531,7 +592,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 	case MAX77843_MUIC_CHG_SPECIAL_1A:
 		ret = max77843_muic_set_path(info,
 					     MAX77843_MUIC_CONTROL1_SW_OPEN,
-					     attached);
+					     attached, false);
 		if (ret < 0)
 			return ret;
 
@@ -550,6 +611,9 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 			extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP,
 						false);
 		break;
+	case MAX77843_MUIC_CHG_DOCK:
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, attached);
+		break;
 	case MAX77843_MUIC_CHG_NONE:
 		break;
 	default:
@@ -558,7 +622,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 			attached ? "attached" : "detached", chg_type);
 
 		max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN,
-				       attached);
+				       attached, false);
 		return -EINVAL;
 	}
 
@@ -798,7 +862,8 @@ static int max77843_muic_probe(struct platform_device *pdev)
 	max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS);
 
 	/* Set initial path for UART */
-	max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true);
+	max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true,
+			       false);
 
 	/* Check revision number of MUIC device */
 	ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id);
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index 4a0612fb9c07..8152790d72e1 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -25,7 +25,7 @@
 #include <linux/kobject.h>
 #include <linux/mfd/max8997.h>
 #include <linux/mfd/max8997-private.h>
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 #include <linux/irqdomain.h>
 
 #define	DEV_NAME			"max8997-muic"
diff --git a/drivers/extcon/extcon-qcom-spmi-misc.c b/drivers/extcon/extcon-qcom-spmi-misc.c
index b8cde096a808..660bbf163bf5 100644
--- a/drivers/extcon/extcon-qcom-spmi-misc.c
+++ b/drivers/extcon/extcon-qcom-spmi-misc.c
@@ -15,7 +15,7 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
diff --git a/drivers/extcon/extcon-rt8973a.c b/drivers/extcon/extcon-rt8973a.c
index eaa355e7d9e4..e059bd5f2041 100644
--- a/drivers/extcon/extcon-rt8973a.c
+++ b/drivers/extcon/extcon-rt8973a.c
@@ -20,7 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 
 #include "extcon-rt8973a.h"
 
diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
index 106ef0297b53..0cfb5a3efdf6 100644
--- a/drivers/extcon/extcon-sm5502.c
+++ b/drivers/extcon/extcon-sm5502.c
@@ -19,7 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 
 #include "extcon-sm5502.h"
 
diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c
index 9c925b05b7aa..53762864a9f7 100644
--- a/drivers/extcon/extcon-usb-gpio.c
+++ b/drivers/extcon/extcon-usb-gpio.c
@@ -14,7 +14,7 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 #include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/init.h>
diff --git a/drivers/extcon/extcon-usbc-cros-ec.c b/drivers/extcon/extcon-usbc-cros-ec.c
index 598956f1dcae..6187f731b29d 100644
--- a/drivers/extcon/extcon-usbc-cros-ec.c
+++ b/drivers/extcon/extcon-usbc-cros-ec.c
@@ -14,7 +14,7 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 #include <linux/kernel.h>
 #include <linux/mfd/cros_ec.h>
 #include <linux/module.h>
diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index 35e9fb885486..cb38c2747684 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -36,7 +36,7 @@
 
 #define SUPPORTED_CABLE_MAX	32
 
-struct __extcon_info {
+static const struct __extcon_info {
 	unsigned int type;
 	unsigned int id;
 	const char *name;
diff --git a/drivers/extcon/extcon.h b/drivers/extcon/extcon.h
index 61358479bfcc..93b5e0306966 100644
--- a/drivers/extcon/extcon.h
+++ b/drivers/extcon/extcon.h
@@ -2,7 +2,7 @@
 #ifndef __LINUX_EXTCON_INTERNAL_H__
 #define __LINUX_EXTCON_INTERNAL_H__
 
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 
 /**
  * struct extcon_dev - An extcon device represents one external connector.
diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index 34427a6a15af..362607f727ee 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/device.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -594,6 +595,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 	int i;
 	int phy_count;
 	struct phy **phy;
+	struct device_link **link;
 	void __iomem *base;
 	struct resource *res;
 	struct dw_pcie *pci;
@@ -649,11 +651,21 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 	if (!phy)
 		return -ENOMEM;
 
+	link = devm_kzalloc(dev, sizeof(*link) * phy_count, GFP_KERNEL);
+	if (!link)
+		return -ENOMEM;
+
 	for (i = 0; i < phy_count; i++) {
 		snprintf(name, sizeof(name), "pcie-phy%d", i);
 		phy[i] = devm_phy_get(dev, name);
 		if (IS_ERR(phy[i]))
 			return PTR_ERR(phy[i]);
+
+		link[i] = device_link_add(dev, &phy[i]->dev, DL_FLAG_STATELESS);
+		if (!link[i]) {
+			ret = -EINVAL;
+			goto err_link;
+		}
 	}
 
 	dra7xx->base = base;
@@ -732,6 +744,10 @@ err_get_sync:
 	pm_runtime_disable(dev);
 	dra7xx_pcie_disable_phy(dra7xx);
 
+err_link:
+	while (--i >= 0)
+		device_link_del(link[i]);
+
 	return ret;
 }
 
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 1161e11fb3cf..aa857be692cf 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -24,7 +24,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/err.h>
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -926,6 +926,7 @@ static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = {
 	.phyctl_offset = REG_PHYCTL_A33,
 	.dedicated_clocks = true,
 	.enable_pmu_unk1 = true,
+	.phy0_dual_route = true,
 };
 
 static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index 64fc59c3ae6d..97d27b0d5cc7 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -67,3 +67,16 @@ config PHY_BRCM_SATA
 	help
 	  Enable this to support the Broadcom SATA PHY.
 	  If unsure, say N.
+
+config PHY_BRCM_USB
+	tristate "Broadcom STB USB PHY driver"
+	depends on ARCH_BRCMSTB
+	depends on OF
+	select GENERIC_PHY
+	select SOC_BRCMSTB
+	default ARCH_BRCMSTB
+	help
+	  Enable this to support the Broadcom STB USB PHY.
+	  This driver is required by the USB XHCI, EHCI and OHCI
+	  drivers.
+	  If unsure, say N.
diff --git a/drivers/phy/broadcom/Makefile b/drivers/phy/broadcom/Makefile
index fdd9ec8fd70b..13e000c1a43a 100644
--- a/drivers/phy/broadcom/Makefile
+++ b/drivers/phy/broadcom/Makefile
@@ -6,3 +6,6 @@ obj-$(CONFIG_PHY_BCM_NS_USB3)		+= phy-bcm-ns-usb3.o
 obj-$(CONFIG_PHY_NS2_PCIE)		+= phy-bcm-ns2-pcie.o
 obj-$(CONFIG_PHY_NS2_USB_DRD)		+= phy-bcm-ns2-usbdrd.o
 obj-$(CONFIG_PHY_BRCM_SATA)		+= phy-brcm-sata.o
+obj-$(CONFIG_PHY_BRCM_USB)		+= phy-brcm-usb-dvr.o
+
+phy-brcm-usb-dvr-objs := phy-brcm-usb.o phy-brcm-usb-init.o
diff --git a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
index d099a0c8cee5..7ceea5ae2704 100644
--- a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
+++ b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
@@ -12,7 +12,7 @@
  */
 
 #include <linux/delay.h>
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 #include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/init.h>
diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c
index 9d7f74fe3d7c..3f953db70288 100644
--- a/drivers/phy/broadcom/phy-brcm-sata.c
+++ b/drivers/phy/broadcom/phy-brcm-sata.c
@@ -49,11 +49,29 @@ enum brcm_sata_phy_version {
 	BRCM_SATA_PHY_IPROC_SR,
 };
 
+enum brcm_sata_phy_rxaeq_mode {
+	RXAEQ_MODE_OFF = 0,
+	RXAEQ_MODE_AUTO,
+	RXAEQ_MODE_MANUAL,
+};
+
+static enum brcm_sata_phy_rxaeq_mode rxaeq_to_val(const char *m)
+{
+	if (!strcmp(m, "auto"))
+		return RXAEQ_MODE_AUTO;
+	else if (!strcmp(m, "manual"))
+		return RXAEQ_MODE_MANUAL;
+	else
+		return RXAEQ_MODE_OFF;
+}
+
 struct brcm_sata_port {
 	int portnum;
 	struct phy *phy;
 	struct brcm_sata_phy *phy_priv;
 	bool ssc_en;
+	enum brcm_sata_phy_rxaeq_mode rxaeq_mode;
+	u32 rxaeq_val;
 };
 
 struct brcm_sata_phy {
@@ -93,6 +111,15 @@ enum sata_phy_regs {
 	TX_ACTRL0				= 0x80,
 	TX_ACTRL0_TXPOL_FLIP			= BIT(6),
 
+	AEQRX_REG_BANK_0			= 0xd0,
+	AEQ_CONTROL1				= 0x81,
+	AEQ_CONTROL1_ENABLE			= BIT(2),
+	AEQ_CONTROL1_FREEZE			= BIT(3),
+	AEQ_FRC_EQ				= 0x83,
+	AEQ_FRC_EQ_FORCE			= BIT(0),
+	AEQ_FRC_EQ_FORCE_VAL			= BIT(1),
+	AEQRX_REG_BANK_1			= 0xe0,
+
 	OOB_REG_BANK				= 0x150,
 	OOB1_REG_BANK				= 0x160,
 	OOB_CTRL1				= 0x80,
@@ -190,7 +217,7 @@ static u32 brcm_sata_phy_rd(void __iomem *pcb_base, u32 bank, u32 ofs)
 #define STB_FMAX_VAL_DEFAULT	0x3df
 #define STB_FMAX_VAL_SSC	0x83
 
-static int brcm_stb_sata_init(struct brcm_sata_port *port)
+static void brcm_stb_sata_ssc_init(struct brcm_sata_port *port)
 {
 	void __iomem *base = brcm_sata_pcb_base(port);
 	struct brcm_sata_phy *priv = port->phy_priv;
@@ -215,10 +242,47 @@ static int brcm_stb_sata_init(struct brcm_sata_port *port)
 
 	brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3,
 			  ~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp);
+}
+
+#define AEQ_FRC_EQ_VAL_SHIFT	2
+#define AEQ_FRC_EQ_VAL_MASK	0x3f
+
+static int brcm_stb_sata_rxaeq_init(struct brcm_sata_port *port)
+{
+	void __iomem *base = brcm_sata_pcb_base(port);
+	u32 tmp = 0, reg = 0;
+
+	switch (port->rxaeq_mode) {
+	case RXAEQ_MODE_OFF:
+		return 0;
+
+	case RXAEQ_MODE_AUTO:
+		reg = AEQ_CONTROL1;
+		tmp = AEQ_CONTROL1_ENABLE | AEQ_CONTROL1_FREEZE;
+		break;
+
+	case RXAEQ_MODE_MANUAL:
+		reg = AEQ_FRC_EQ;
+		tmp = AEQ_FRC_EQ_FORCE | AEQ_FRC_EQ_FORCE_VAL;
+		if (port->rxaeq_val > AEQ_FRC_EQ_VAL_MASK)
+			return -EINVAL;
+		tmp |= port->rxaeq_val << AEQ_FRC_EQ_VAL_SHIFT;
+		break;
+	}
+
+	brcm_sata_phy_wr(base, AEQRX_REG_BANK_0, reg, ~tmp, tmp);
+	brcm_sata_phy_wr(base, AEQRX_REG_BANK_1, reg, ~tmp, tmp);
 
 	return 0;
 }
 
+static int brcm_stb_sata_init(struct brcm_sata_port *port)
+{
+	brcm_stb_sata_ssc_init(port);
+
+	return brcm_stb_sata_rxaeq_init(port);
+}
+
 /* NS2 SATA PLL1 defaults were characterized by H/W group */
 #define NS2_PLL1_ACTRL2_MAGIC	0x1df8
 #define NS2_PLL1_ACTRL3_MAGIC	0x2b00
@@ -463,6 +527,7 @@ MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
 
 static int brcm_sata_phy_probe(struct platform_device *pdev)
 {
+	const char *rxaeq_mode;
 	struct device *dev = &pdev->dev;
 	struct device_node *dn = dev->of_node, *child;
 	const struct of_device_id *of_id;
@@ -525,6 +590,13 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
 		port->portnum = id;
 		port->phy_priv = priv;
 		port->phy = devm_phy_create(dev, child, &phy_ops);
+		port->rxaeq_mode = RXAEQ_MODE_OFF;
+		if (!of_property_read_string(child, "brcm,rxaeq-mode",
+					     &rxaeq_mode))
+			port->rxaeq_mode = rxaeq_to_val(rxaeq_mode);
+		if (port->rxaeq_mode == RXAEQ_MODE_MANUAL)
+			of_property_read_u32(child, "brcm,rxaeq-value",
+					     &port->rxaeq_val);
 		port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
 		if (IS_ERR(port->phy)) {
 			dev_err(dev, "failed to create PHY\n");
diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.c b/drivers/phy/broadcom/phy-brcm-usb-init.c
new file mode 100644
index 000000000000..1e7ce0b6f299
--- /dev/null
+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
@@ -0,0 +1,1017 @@
+/*
+ * phy-brcm-usb-init.c - Broadcom USB Phy chip specific init functions
+ *
+ * Copyright (C) 2014-2017 Broadcom
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This module contains USB PHY initialization for power up and S3 resume
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <linux/soc/brcmstb/brcmstb.h>
+#include "phy-brcm-usb-init.h"
+
+#define PHY_PORTS 2
+#define PHY_PORT_SELECT_0 0
+#define PHY_PORT_SELECT_1 0x1000
+
+/* Register definitions for the USB CTRL block */
+#define USB_CTRL_SETUP			0x00
+#define   USB_CTRL_SETUP_IOC_MASK			0x00000010
+#define   USB_CTRL_SETUP_IPP_MASK			0x00000020
+#define   USB_CTRL_SETUP_BABO_MASK			0x00000001
+#define   USB_CTRL_SETUP_FNHW_MASK			0x00000002
+#define   USB_CTRL_SETUP_FNBO_MASK			0x00000004
+#define   USB_CTRL_SETUP_WABO_MASK			0x00000008
+#define   USB_CTRL_SETUP_SCB_CLIENT_SWAP_MASK		0x00002000 /* option */
+#define   USB_CTRL_SETUP_SCB1_EN_MASK			0x00004000 /* option */
+#define   USB_CTRL_SETUP_SCB2_EN_MASK			0x00008000 /* option */
+#define   USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK		0X00020000 /* option */
+#define   USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK	0x00010000 /* option */
+#define   USB_CTRL_SETUP_STRAP_IPP_SEL_MASK		0x02000000 /* option */
+#define   USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK	0x04000000 /* option */
+#define   USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK 0x08000000 /* opt */
+#define   USB_CTRL_SETUP_OC3_DISABLE_MASK		0xc0000000 /* option */
+#define USB_CTRL_PLL_CTL		0x04
+#define   USB_CTRL_PLL_CTL_PLL_SUSPEND_EN_MASK		0x08000000
+#define   USB_CTRL_PLL_CTL_PLL_RESETB_MASK		0x40000000
+#define   USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK		0x80000000 /* option */
+#define USB_CTRL_EBRIDGE		0x0c
+#define   USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK		0x00020000 /* option */
+#define USB_CTRL_MDIO			0x14
+#define USB_CTRL_MDIO2			0x18
+#define USB_CTRL_UTMI_CTL_1		0x2c
+#define   USB_CTRL_UTMI_CTL_1_POWER_UP_FSM_EN_MASK	0x00000800
+#define   USB_CTRL_UTMI_CTL_1_POWER_UP_FSM_EN_P1_MASK	0x08000000
+#define USB_CTRL_USB_PM			0x34
+#define   USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK		0x00800000 /* option */
+#define   USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK		0x00400000 /* option */
+#define   USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK	0x40000000 /* option */
+#define   USB_CTRL_USB_PM_USB_PWRDN_MASK		0x80000000 /* option */
+#define   USB_CTRL_USB_PM_SOFT_RESET_MASK		0x40000000 /* option */
+#define   USB_CTRL_USB_PM_USB20_HC_RESETB_MASK		0x30000000 /* option */
+#define   USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK	0x00300000 /* option */
+#define USB_CTRL_USB30_CTL1		0x60
+#define   USB_CTRL_USB30_CTL1_PHY3_PLL_SEQ_START_MASK	0x00000010
+#define   USB_CTRL_USB30_CTL1_PHY3_RESETB_MASK		0x00010000
+#define   USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK	0x00020000 /* option */
+#define   USB_CTRL_USB30_CTL1_USB3_IOC_MASK		0x10000000 /* option */
+#define   USB_CTRL_USB30_CTL1_USB3_IPP_MASK		0x20000000 /* option */
+#define USB_CTRL_USB30_PCTL		0x70
+#define   USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_MASK	0x00000002
+#define   USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_P1_MASK	0x00020000
+#define USB_CTRL_USB_DEVICE_CTL1	0x90
+#define   USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK	0x00000003 /* option */
+
+/* Register definitions for the XHCI EC block */
+#define USB_XHCI_EC_IRAADR 0x658
+#define USB_XHCI_EC_IRADAT 0x65c
+
+enum brcm_family_type {
+	BRCM_FAMILY_3390A0,
+	BRCM_FAMILY_7250B0,
+	BRCM_FAMILY_7271A0,
+	BRCM_FAMILY_7364A0,
+	BRCM_FAMILY_7366C0,
+	BRCM_FAMILY_74371A0,
+	BRCM_FAMILY_7439B0,
+	BRCM_FAMILY_7445D0,
+	BRCM_FAMILY_7260A0,
+	BRCM_FAMILY_7278A0,
+	BRCM_FAMILY_COUNT,
+};
+
+#define USB_BRCM_FAMILY(chip) \
+	[BRCM_FAMILY_##chip] = __stringify(chip)
+
+static const char *family_names[BRCM_FAMILY_COUNT] = {
+	USB_BRCM_FAMILY(3390A0),
+	USB_BRCM_FAMILY(7250B0),
+	USB_BRCM_FAMILY(7271A0),
+	USB_BRCM_FAMILY(7364A0),
+	USB_BRCM_FAMILY(7366C0),
+	USB_BRCM_FAMILY(74371A0),
+	USB_BRCM_FAMILY(7439B0),
+	USB_BRCM_FAMILY(7445D0),
+	USB_BRCM_FAMILY(7260A0),
+	USB_BRCM_FAMILY(7278A0),
+};
+
+enum {
+	USB_CTRL_SETUP_SCB1_EN_SELECTOR,
+	USB_CTRL_SETUP_SCB2_EN_SELECTOR,
+	USB_CTRL_SETUP_SS_EHCI64BIT_EN_SELECTOR,
+	USB_CTRL_SETUP_STRAP_IPP_SEL_SELECTOR,
+	USB_CTRL_SETUP_OC3_DISABLE_SELECTOR,
+	USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_SELECTOR,
+	USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_SELECTOR,
+	USB_CTRL_USB_PM_BDC_SOFT_RESETB_SELECTOR,
+	USB_CTRL_USB_PM_XHC_SOFT_RESETB_SELECTOR,
+	USB_CTRL_USB_PM_USB_PWRDN_SELECTOR,
+	USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_SELECTOR,
+	USB_CTRL_USB30_CTL1_USB3_IOC_SELECTOR,
+	USB_CTRL_USB30_CTL1_USB3_IPP_SELECTOR,
+	USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_SELECTOR,
+	USB_CTRL_USB_PM_SOFT_RESET_SELECTOR,
+	USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_SELECTOR,
+	USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_SELECTOR,
+	USB_CTRL_USB_PM_USB20_HC_RESETB_SELECTOR,
+	USB_CTRL_SETUP_ENDIAN_SELECTOR,
+	USB_CTRL_SELECTOR_COUNT,
+};
+
+#define USB_CTRL_REG(base, reg)	((void *)base + USB_CTRL_##reg)
+#define USB_XHCI_EC_REG(base, reg) ((void *)base + USB_XHCI_EC_##reg)
+#define USB_CTRL_MASK(reg, field) \
+	USB_CTRL_##reg##_##field##_MASK
+#define USB_CTRL_MASK_FAMILY(params, reg, field)			\
+	(params->usb_reg_bits_map[USB_CTRL_##reg##_##field##_SELECTOR])
+
+#define USB_CTRL_SET_FAMILY(params, reg, field)	\
+	usb_ctrl_set_family(params, USB_CTRL_##reg,	\
+			USB_CTRL_##reg##_##field##_SELECTOR)
+#define USB_CTRL_UNSET_FAMILY(params, reg, field)	\
+	usb_ctrl_unset_family(params, USB_CTRL_##reg,	\
+		USB_CTRL_##reg##_##field##_SELECTOR)
+
+#define USB_CTRL_SET(base, reg, field)	\
+	usb_ctrl_set(USB_CTRL_REG(base, reg),		\
+		     USB_CTRL_##reg##_##field##_MASK)
+#define USB_CTRL_UNSET(base, reg, field)	\
+	usb_ctrl_unset(USB_CTRL_REG(base, reg),		\
+		       USB_CTRL_##reg##_##field##_MASK)
+
+#define MDIO_USB2	0
+#define MDIO_USB3	BIT(31)
+
+#define USB_CTRL_SETUP_ENDIAN_BITS (	\
+		USB_CTRL_MASK(SETUP, BABO) |	\
+		USB_CTRL_MASK(SETUP, FNHW) |	\
+		USB_CTRL_MASK(SETUP, FNBO) |	\
+		USB_CTRL_MASK(SETUP, WABO))
+
+#ifdef __LITTLE_ENDIAN
+#define ENDIAN_SETTINGS (			\
+		USB_CTRL_MASK(SETUP, BABO) |	\
+		USB_CTRL_MASK(SETUP, FNHW))
+#else
+#define ENDIAN_SETTINGS (			\
+		USB_CTRL_MASK(SETUP, FNHW) |	\
+		USB_CTRL_MASK(SETUP, FNBO) |	\
+		USB_CTRL_MASK(SETUP, WABO))
+#endif
+
+struct id_to_type {
+	u32 id;
+	int type;
+};
+
+static const struct id_to_type id_to_type_table[] = {
+	{ 0x33900000, BRCM_FAMILY_3390A0 },
+	{ 0x72500010, BRCM_FAMILY_7250B0 },
+	{ 0x72600000, BRCM_FAMILY_7260A0 },
+	{ 0x72680000, BRCM_FAMILY_7271A0 },
+	{ 0x72710000, BRCM_FAMILY_7271A0 },
+	{ 0x73640000, BRCM_FAMILY_7364A0 },
+	{ 0x73660020, BRCM_FAMILY_7366C0 },
+	{ 0x07437100, BRCM_FAMILY_74371A0 },
+	{ 0x74390010, BRCM_FAMILY_7439B0 },
+	{ 0x74450030, BRCM_FAMILY_7445D0 },
+	{ 0x72780000, BRCM_FAMILY_7278A0 },
+	{ 0, BRCM_FAMILY_7271A0 }, /* default */
+};
+
+static const u32
+usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = {
+	/* 3390B0 */
+	[BRCM_FAMILY_3390A0] = {
+		USB_CTRL_SETUP_SCB1_EN_MASK,
+		USB_CTRL_SETUP_SCB2_EN_MASK,
+		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
+		USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_MASK,
+		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
+		USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK,
+		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
+		USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK,
+		USB_CTRL_USB_PM_USB_PWRDN_MASK,
+		0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
+		USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK,
+		0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
+		0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
+		0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
+		USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK,
+		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+	/* 7250b0 */
+	[BRCM_FAMILY_7250B0] = {
+		USB_CTRL_SETUP_SCB1_EN_MASK,
+		USB_CTRL_SETUP_SCB2_EN_MASK,
+		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
+		0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
+		USB_CTRL_SETUP_OC3_DISABLE_MASK,
+		USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK,
+		USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK,
+		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
+		USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK,
+		0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */
+		0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
+		0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */
+		0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
+		0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
+		0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
+		USB_CTRL_USB_PM_USB20_HC_RESETB_MASK,
+		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+	/* 7271a0 */
+	[BRCM_FAMILY_7271A0] = {
+		0, /* USB_CTRL_SETUP_SCB1_EN_MASK */
+		0, /* USB_CTRL_SETUP_SCB2_EN_MASK */
+		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
+		USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_MASK,
+		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
+		USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK,
+		USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK,
+		USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK,
+		USB_CTRL_USB_PM_USB_PWRDN_MASK,
+		0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
+		USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK,
+		USB_CTRL_USB_PM_SOFT_RESET_MASK,
+		USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK,
+		USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK,
+		USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK,
+		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+	/* 7364a0 */
+	[BRCM_FAMILY_7364A0] = {
+		USB_CTRL_SETUP_SCB1_EN_MASK,
+		USB_CTRL_SETUP_SCB2_EN_MASK,
+		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
+		0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
+		USB_CTRL_SETUP_OC3_DISABLE_MASK,
+		USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK,
+		USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK,
+		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
+		USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK,
+		0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */
+		0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
+		0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */
+		0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
+		0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
+		0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
+		USB_CTRL_USB_PM_USB20_HC_RESETB_MASK,
+		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+	/* 7366c0 */
+	[BRCM_FAMILY_7366C0] = {
+		USB_CTRL_SETUP_SCB1_EN_MASK,
+		USB_CTRL_SETUP_SCB2_EN_MASK,
+		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
+		0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
+		USB_CTRL_SETUP_OC3_DISABLE_MASK,
+		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
+		USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK,
+		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
+		USB_CTRL_USB_PM_XHC_SOFT_RESETB_VAR_MASK,
+		USB_CTRL_USB_PM_USB_PWRDN_MASK,
+		0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
+		0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */
+		0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
+		0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
+		0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
+		USB_CTRL_USB_PM_USB20_HC_RESETB_MASK,
+		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+	/* 74371A0 */
+	[BRCM_FAMILY_74371A0] = {
+		USB_CTRL_SETUP_SCB1_EN_MASK,
+		USB_CTRL_SETUP_SCB2_EN_MASK,
+		USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK,
+		0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
+		0, /* USB_CTRL_SETUP_OC3_DISABLE_MASK */
+		USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK,
+		0, /* USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK */
+		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */
+		USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK,
+		USB_CTRL_USB30_CTL1_USB3_IOC_MASK,
+		USB_CTRL_USB30_CTL1_USB3_IPP_MASK,
+		0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */
+		0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
+		0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
+		0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
+		0, /* USB_CTRL_USB_PM_USB20_HC_RESETB_MASK */
+		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+	/* 7439B0 */
+	[BRCM_FAMILY_7439B0] = {
+		USB_CTRL_SETUP_SCB1_EN_MASK,
+		USB_CTRL_SETUP_SCB2_EN_MASK,
+		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
+		USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_MASK,
+		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
+		0, /* USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK */
+		USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK,
+		USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK,
+		USB_CTRL_USB_PM_USB_PWRDN_MASK,
+		0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
+		USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK,
+		0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
+		0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
+		0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
+		USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK,
+		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+	/* 7445d0 */
+	[BRCM_FAMILY_7445D0] = {
+		USB_CTRL_SETUP_SCB1_EN_MASK,
+		USB_CTRL_SETUP_SCB2_EN_MASK,
+		USB_CTRL_SETUP_SS_EHCI64BIT_EN_VAR_MASK,
+		0, /* USB_CTRL_SETUP_STRAP_IPP_SEL_MASK */
+		USB_CTRL_SETUP_OC3_DISABLE_MASK,
+		USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK,
+		0, /* USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK */
+		0, /* USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB_PM_USB_PWRDN_MASK */
+		USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK,
+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
+		0, /* USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK */
+		0, /* USB_CTRL_USB_PM_SOFT_RESET_MASK */
+		0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
+		0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
+		USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK,
+		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+	/* 7260a0 */
+	[BRCM_FAMILY_7260A0] = {
+		0, /* USB_CTRL_SETUP_SCB1_EN_MASK */
+		0, /* USB_CTRL_SETUP_SCB2_EN_MASK */
+		USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK,
+		USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_MASK,
+		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
+		USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK,
+		USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK,
+		USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK,
+		USB_CTRL_USB_PM_USB_PWRDN_MASK,
+		0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
+		USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK,
+		USB_CTRL_USB_PM_SOFT_RESET_MASK,
+		USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK,
+		USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK,
+		USB_CTRL_USB_PM_USB20_HC_RESETB_VAR_MASK,
+		ENDIAN_SETTINGS, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+	/* 7278a0 */
+	[BRCM_FAMILY_7278A0] = {
+		0, /* USB_CTRL_SETUP_SCB1_EN_MASK */
+		0, /* USB_CTRL_SETUP_SCB2_EN_MASK */
+		0, /*USB_CTRL_SETUP_SS_EHCI64BIT_EN_MASK */
+		USB_CTRL_SETUP_STRAP_IPP_SEL_MASK,
+		USB_CTRL_SETUP_OC3_DISABLE_MASK,
+		0, /* USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK */
+		USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK,
+		USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK,
+		USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK,
+		USB_CTRL_USB_PM_USB_PWRDN_MASK,
+		0, /* USB_CTRL_USB30_CTL1_XHC_SOFT_RESETB_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IOC_MASK */
+		0, /* USB_CTRL_USB30_CTL1_USB3_IPP_MASK */
+		USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK,
+		USB_CTRL_USB_PM_SOFT_RESET_MASK,
+		0, /* USB_CTRL_SETUP_CC_DRD_MODE_ENABLE_MASK */
+		0, /* USB_CTRL_SETUP_STRAP_CC_DRD_MODE_ENABLE_SEL_MASK */
+		0, /* USB_CTRL_USB_PM_USB20_HC_RESETB_MASK */
+		0, /* USB_CTRL_SETUP ENDIAN bits */
+	},
+};
+
+static inline u32 brcmusb_readl(void __iomem *addr)
+{
+	return readl(addr);
+}
+
+static inline void brcmusb_writel(u32 val, void __iomem *addr)
+{
+	writel(val, addr);
+}
+
+static inline
+void usb_ctrl_unset_family(struct brcm_usb_init_params *params,
+			   u32 reg_offset, u32 field)
+{
+	u32 mask;
+	void *reg;
+
+	mask = params->usb_reg_bits_map[field];
+	reg = params->ctrl_regs + reg_offset;
+	brcmusb_writel(brcmusb_readl(reg) & ~mask, reg);
+};
+
+static inline
+void usb_ctrl_set_family(struct brcm_usb_init_params *params,
+			 u32 reg_offset, u32 field)
+{
+	u32 mask;
+	void *reg;
+
+	mask = params->usb_reg_bits_map[field];
+	reg = params->ctrl_regs + reg_offset;
+	brcmusb_writel(brcmusb_readl(reg) | mask, reg);
+};
+
+static inline void usb_ctrl_set(void __iomem *reg, u32 field)
+{
+	u32 value;
+
+	value = brcmusb_readl(reg);
+	brcmusb_writel(value | field, reg);
+}
+
+static inline void usb_ctrl_unset(void __iomem *reg, u32 field)
+{
+	u32 value;
+
+	value = brcmusb_readl(reg);
+	brcmusb_writel(value & ~field, reg);
+}
+
+static u32 brcmusb_usb_mdio_read(void __iomem *ctrl_base, u32 reg, int mode)
+{
+	u32 data;
+
+	data = (reg << 16) | mode;
+	brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
+	data |= (1 << 24);
+	brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
+	data &= ~(1 << 24);
+	/* wait for the 60MHz parallel to serial shifter */
+	usleep_range(10, 20);
+	brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
+	/* wait for the 60MHz parallel to serial shifter */
+	usleep_range(10, 20);
+
+	return brcmusb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff;
+}
+
+static void brcmusb_usb_mdio_write(void __iomem *ctrl_base, u32 reg,
+				   u32 val, int mode)
+{
+	u32 data;
+
+	data = (reg << 16) | val | mode;
+	brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
+	data |= (1 << 25);
+	brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
+	data &= ~(1 << 25);
+
+	/* wait for the 60MHz parallel to serial shifter */
+	usleep_range(10, 20);
+	brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
+	/* wait for the 60MHz parallel to serial shifter */
+	usleep_range(10, 20);
+}
+
+static void brcmusb_usb_phy_ldo_fix(void __iomem *ctrl_base)
+{
+	/* first disable FSM but also leave it that way */
+	/* to allow normal suspend/resume */
+	USB_CTRL_UNSET(ctrl_base, UTMI_CTL_1, POWER_UP_FSM_EN);
+	USB_CTRL_UNSET(ctrl_base, UTMI_CTL_1, POWER_UP_FSM_EN_P1);
+
+	/* reset USB 2.0 PLL */
+	USB_CTRL_UNSET(ctrl_base, PLL_CTL, PLL_RESETB);
+	/* PLL reset period */
+	udelay(1);
+	USB_CTRL_SET(ctrl_base, PLL_CTL, PLL_RESETB);
+	/* Give PLL enough time to lock */
+	usleep_range(1000, 2000);
+}
+
+static void brcmusb_usb2_eye_fix(void __iomem *ctrl_base)
+{
+	/* Increase USB 2.0 TX level to meet spec requirement */
+	brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x80a0, MDIO_USB2);
+	brcmusb_usb_mdio_write(ctrl_base, 0x0a, 0xc6a0, MDIO_USB2);
+}
+
+static void brcmusb_usb3_pll_fix(void __iomem *ctrl_base)
+{
+	/* Set correct window for PLL lock detect */
+	brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x07, 0x1503, MDIO_USB3);
+}
+
+static void brcmusb_usb3_enable_pipe_reset(void __iomem *ctrl_base)
+{
+	u32 val;
+
+	/* Re-enable USB 3.0 pipe reset */
+	brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3);
+	val = brcmusb_usb_mdio_read(ctrl_base, 0x0f, MDIO_USB3) | 0x200;
+	brcmusb_usb_mdio_write(ctrl_base, 0x0f, val, MDIO_USB3);
+}
+
+static void brcmusb_usb3_enable_sigdet(void __iomem *ctrl_base)
+{
+	u32 val, ofs;
+	int ii;
+
+	ofs = 0;
+	for (ii = 0; ii < PHY_PORTS; ++ii) {
+		/* Set correct default for sigdet */
+		brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8080 + ofs),
+				       MDIO_USB3);
+		val = brcmusb_usb_mdio_read(ctrl_base, 0x05, MDIO_USB3);
+		val = (val & ~0x800f) | 0x800d;
+		brcmusb_usb_mdio_write(ctrl_base, 0x05, val, MDIO_USB3);
+		ofs = PHY_PORT_SELECT_1;
+	}
+}
+
+static void brcmusb_usb3_enable_skip_align(void __iomem *ctrl_base)
+{
+	u32 val, ofs;
+	int ii;
+
+	ofs = 0;
+	for (ii = 0; ii < PHY_PORTS; ++ii) {
+		/* Set correct default for SKIP align */
+		brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8060 + ofs),
+				       MDIO_USB3);
+		val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0x200;
+		brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3);
+		ofs = PHY_PORT_SELECT_1;
+	}
+}
+
+static void brcmusb_usb3_unfreeze_aeq(void __iomem *ctrl_base)
+{
+	u32 val, ofs;
+	int ii;
+
+	ofs = 0;
+	for (ii = 0; ii < PHY_PORTS; ++ii) {
+		/* Let EQ freeze after TSEQ */
+		brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x80e0 + ofs),
+				       MDIO_USB3);
+		val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3);
+		val &= ~0x0008;
+		brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3);
+		ofs = PHY_PORT_SELECT_1;
+	}
+}
+
+static void brcmusb_usb3_pll_54mhz(struct brcm_usb_init_params *params)
+{
+	u32 ofs;
+	int ii;
+	void __iomem *ctrl_base = params->ctrl_regs;
+
+	/*
+	 * On newer B53 based SoC's, the reference clock for the
+	 * 3.0 PLL has been changed from 50MHz to 54MHz so the
+	 * PLL needs to be reprogrammed.
+	 * See SWLINUX-4006.
+	 *
+	 * On the 7364C0, the reference clock for the
+	 * 3.0 PLL has been changed from 50MHz to 54MHz to
+	 * work around a MOCA issue.
+	 * See SWLINUX-4169.
+	 */
+	switch (params->selected_family) {
+	case BRCM_FAMILY_3390A0:
+	case BRCM_FAMILY_7250B0:
+	case BRCM_FAMILY_7366C0:
+	case BRCM_FAMILY_74371A0:
+	case BRCM_FAMILY_7439B0:
+	case BRCM_FAMILY_7445D0:
+	case BRCM_FAMILY_7260A0:
+		return;
+	case BRCM_FAMILY_7364A0:
+		if (BRCM_REV(params->family_id) < 0x20)
+			return;
+		break;
+	}
+
+	/* set USB 3.0 PLL to accept 54Mhz reference clock */
+	USB_CTRL_UNSET(ctrl_base, USB30_CTL1, PHY3_PLL_SEQ_START);
+
+	brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8000, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x10, 0x5784, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x11, 0x01d0, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x12, 0x1DE8, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x13, 0xAA80, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x14, 0x8826, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x15, 0x0044, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x16, 0x8000, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x17, 0x0851, MDIO_USB3);
+	brcmusb_usb_mdio_write(ctrl_base, 0x18, 0x0000, MDIO_USB3);
+
+	/* both ports */
+	ofs = 0;
+	for (ii = 0; ii < PHY_PORTS; ++ii) {
+		brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8040 + ofs),
+				       MDIO_USB3);
+		brcmusb_usb_mdio_write(ctrl_base, 0x03, 0x0090, MDIO_USB3);
+		brcmusb_usb_mdio_write(ctrl_base, 0x04, 0x0134, MDIO_USB3);
+		brcmusb_usb_mdio_write(ctrl_base, 0x1f, (0x8020 + ofs),
+				       MDIO_USB3);
+		brcmusb_usb_mdio_write(ctrl_base, 0x01, 0x00e2, MDIO_USB3);
+		ofs = PHY_PORT_SELECT_1;
+	}
+
+	/* restart PLL sequence */
+	USB_CTRL_SET(ctrl_base, USB30_CTL1, PHY3_PLL_SEQ_START);
+	/* Give PLL enough time to lock */
+	usleep_range(1000, 2000);
+}
+
+static void brcmusb_usb3_ssc_enable(void __iomem *ctrl_base)
+{
+	u32 val;
+
+	/* Enable USB 3.0 TX spread spectrum */
+	brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x8040, MDIO_USB3);
+	val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0xf;
+	brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3);
+
+	/* Currently, USB 3.0 SSC is enabled via port 0 MDIO registers,
+	 * which should have been adequate. However, due to a bug in the
+	 * USB 3.0 PHY, it must be enabled via both ports (HWUSB3DVT-26).
+	 */
+	brcmusb_usb_mdio_write(ctrl_base, 0x1f, 0x9040, MDIO_USB3);
+	val = brcmusb_usb_mdio_read(ctrl_base, 0x01, MDIO_USB3) | 0xf;
+	brcmusb_usb_mdio_write(ctrl_base, 0x01, val, MDIO_USB3);
+}
+
+static void brcmusb_usb3_phy_workarounds(struct brcm_usb_init_params *params)
+{
+	void __iomem *ctrl_base = params->ctrl_regs;
+
+	brcmusb_usb3_pll_fix(ctrl_base);
+	brcmusb_usb3_pll_54mhz(params);
+	brcmusb_usb3_ssc_enable(ctrl_base);
+	brcmusb_usb3_enable_pipe_reset(ctrl_base);
+	brcmusb_usb3_enable_sigdet(ctrl_base);
+	brcmusb_usb3_enable_skip_align(ctrl_base);
+	brcmusb_usb3_unfreeze_aeq(ctrl_base);
+}
+
+static void brcmusb_memc_fix(struct brcm_usb_init_params *params)
+{
+	u32 prid;
+
+	if (params->selected_family != BRCM_FAMILY_7445D0)
+		return;
+	/*
+	 * This is a workaround for HW7445-1869 where a DMA write ends up
+	 * doing a read pre-fetch after the end of the DMA buffer. This
+	 * causes a problem when the DMA buffer is at the end of physical
+	 * memory, causing the pre-fetch read to access non-existent memory,
+	 * and the chip bondout has MEMC2 disabled. When the pre-fetch read
+	 * tries to use the disabled MEMC2, it hangs the bus. The workaround
+	 * is to disable MEMC2 access in the usb controller which avoids
+	 * the hang.
+	 */
+
+	prid = params->product_id & 0xfffff000;
+	switch (prid) {
+	case 0x72520000:
+	case 0x74480000:
+	case 0x74490000:
+	case 0x07252000:
+	case 0x07448000:
+	case 0x07449000:
+		USB_CTRL_UNSET_FAMILY(params, SETUP, SCB2_EN);
+	}
+}
+
+static void brcmusb_usb3_otp_fix(struct brcm_usb_init_params *params)
+{
+	void __iomem *xhci_ec_base = params->xhci_ec_regs;
+	u32 val;
+
+	if (params->family_id != 0x74371000 || xhci_ec_base == 0)
+		return;
+	brcmusb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR));
+	val = brcmusb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT));
+
+	/* set cfg_pick_ss_lock */
+	val |= (1 << 27);
+	brcmusb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT));
+
+	/* Reset USB 3.0 PHY for workaround to take effect */
+	USB_CTRL_UNSET(params->ctrl_regs, USB30_CTL1, PHY3_RESETB);
+	USB_CTRL_SET(params->ctrl_regs,	USB30_CTL1, PHY3_RESETB);
+}
+
+static void brcmusb_xhci_soft_reset(struct brcm_usb_init_params *params,
+				    int on_off)
+{
+	/* Assert reset */
+	if (on_off) {
+		if (USB_CTRL_MASK_FAMILY(params, USB_PM, XHC_SOFT_RESETB))
+			USB_CTRL_UNSET_FAMILY(params, USB_PM, XHC_SOFT_RESETB);
+		else
+			USB_CTRL_UNSET_FAMILY(params,
+					      USB30_CTL1, XHC_SOFT_RESETB);
+	} else { /* De-assert reset */
+		if (USB_CTRL_MASK_FAMILY(params, USB_PM, XHC_SOFT_RESETB))
+			USB_CTRL_SET_FAMILY(params, USB_PM, XHC_SOFT_RESETB);
+		else
+			USB_CTRL_SET_FAMILY(params, USB30_CTL1,
+					    XHC_SOFT_RESETB);
+	}
+}
+
+/*
+ * Return the best map table family. The order is:
+ *   - exact match of chip and major rev
+ *   - exact match of chip and closest older major rev
+ *   - default chip/rev.
+ * NOTE: The minor rev is always ignored.
+ */
+static enum brcm_family_type brcmusb_get_family_type(
+	struct brcm_usb_init_params *params)
+{
+	int last_type = -1;
+	u32 last_family = 0;
+	u32 family_no_major;
+	unsigned int x;
+	u32 family;
+
+	family = params->family_id & 0xfffffff0;
+	family_no_major = params->family_id & 0xffffff00;
+	for (x = 0; id_to_type_table[x].id; x++) {
+		if (family == id_to_type_table[x].id)
+			return id_to_type_table[x].type;
+		if (family_no_major == (id_to_type_table[x].id & 0xffffff00))
+			if (family > id_to_type_table[x].id &&
+			    last_family < id_to_type_table[x].id) {
+				last_family = id_to_type_table[x].id;
+				last_type = id_to_type_table[x].type;
+			}
+	}
+
+	/* If no match, return the default family */
+	if (last_type == -1)
+		return id_to_type_table[x].type;
+	return last_type;
+}
+
+void brcm_usb_init_ipp(struct brcm_usb_init_params *params)
+{
+	void __iomem *ctrl = params->ctrl_regs;
+	u32 reg;
+	u32 orig_reg;
+
+	/* Starting with the 7445d0, there are no longer separate 3.0
+	 * versions of IOC and IPP.
+	 */
+	if (USB_CTRL_MASK_FAMILY(params, USB30_CTL1, USB3_IOC)) {
+		if (params->ioc)
+			USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IOC);
+		if (params->ipp == 1)
+			USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IPP);
+	}
+
+	reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP));
+	orig_reg = reg;
+	if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_CC_DRD_MODE_ENABLE_SEL))
+		/* Never use the strap, it's going away. */
+		reg &= ~(USB_CTRL_MASK_FAMILY(params,
+					      SETUP,
+					      STRAP_CC_DRD_MODE_ENABLE_SEL));
+	if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_IPP_SEL))
+		if (params->ipp != 2)
+			/* override ipp strap pin (if it exits) */
+			reg &= ~(USB_CTRL_MASK_FAMILY(params, SETUP,
+						      STRAP_IPP_SEL));
+
+	/* Override the default OC and PP polarity */
+	reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC));
+	if (params->ioc)
+		reg |= USB_CTRL_MASK(SETUP, IOC);
+	if (params->ipp == 1 && ((reg & USB_CTRL_MASK(SETUP, IPP)) == 0))
+		reg |= USB_CTRL_MASK(SETUP, IPP);
+	brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
+
+	/*
+	 * If we're changing IPP, make sure power is off long enough
+	 * to turn off any connected devices.
+	 */
+	if (reg != orig_reg)
+		msleep(50);
+}
+
+int brcm_usb_init_get_dual_select(struct brcm_usb_init_params *params)
+{
+	void __iomem *ctrl = params->ctrl_regs;
+	u32 reg = 0;
+
+	if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
+		reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+		reg &= USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
+					PORT_MODE);
+	}
+	return reg;
+}
+
+void brcm_usb_init_set_dual_select(struct brcm_usb_init_params *params,
+				   int mode)
+{
+	void __iomem *ctrl = params->ctrl_regs;
+	u32 reg;
+
+	if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
+		reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+		reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
+					PORT_MODE);
+		reg |= mode;
+		brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+	}
+}
+
+void brcm_usb_init_common(struct brcm_usb_init_params *params)
+{
+	u32 reg;
+	void __iomem *ctrl = params->ctrl_regs;
+
+	/* Take USB out of power down */
+	if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) {
+		USB_CTRL_UNSET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN);
+		/* 1 millisecond - for USB clocks to settle down */
+		usleep_range(1000, 2000);
+	}
+
+	if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN)) {
+		USB_CTRL_UNSET_FAMILY(params, USB_PM, USB_PWRDN);
+		/* 1 millisecond - for USB clocks to settle down */
+		usleep_range(1000, 2000);
+	}
+
+	if (params->selected_family != BRCM_FAMILY_74371A0 &&
+	    (BRCM_ID(params->family_id) != 0x7364))
+		/*
+		 * HW7439-637: 7439a0 and its derivatives do not have large
+		 * enough descriptor storage for this.
+		 */
+		USB_CTRL_SET_FAMILY(params, SETUP, SS_EHCI64BIT_EN);
+
+	/* Block auto PLL suspend by USB2 PHY (Sasi) */
+	USB_CTRL_SET(ctrl, PLL_CTL, PLL_SUSPEND_EN);
+
+	reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP));
+	if (params->selected_family == BRCM_FAMILY_7364A0)
+		/* Suppress overcurrent indication from USB30 ports for A0 */
+		reg |= USB_CTRL_MASK_FAMILY(params, SETUP, OC3_DISABLE);
+
+	brcmusb_usb_phy_ldo_fix(ctrl);
+	brcmusb_usb2_eye_fix(ctrl);
+
+	/*
+	 * Make sure the the second and third memory controller
+	 * interfaces are enabled if they exist.
+	 */
+	if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN))
+		reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN);
+	if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN))
+		reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN);
+	brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
+
+	brcmusb_memc_fix(params);
+
+	if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
+		reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+		reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
+					PORT_MODE);
+		reg |= params->mode;
+		brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+	}
+	if (USB_CTRL_MASK_FAMILY(params, USB_PM, BDC_SOFT_RESETB)) {
+		switch (params->mode) {
+		case USB_CTLR_MODE_HOST:
+			USB_CTRL_UNSET_FAMILY(params, USB_PM, BDC_SOFT_RESETB);
+			break;
+		default:
+			USB_CTRL_SET_FAMILY(params, USB_PM, BDC_SOFT_RESETB);
+		break;
+		}
+	}
+	if (USB_CTRL_MASK_FAMILY(params, SETUP, CC_DRD_MODE_ENABLE)) {
+		if (params->mode == USB_CTLR_MODE_TYPEC_PD)
+			USB_CTRL_SET_FAMILY(params, SETUP, CC_DRD_MODE_ENABLE);
+		else
+			USB_CTRL_UNSET_FAMILY(params, SETUP,
+					      CC_DRD_MODE_ENABLE);
+	}
+}
+
+void brcm_usb_init_eohci(struct brcm_usb_init_params *params)
+{
+	u32 reg;
+	void __iomem *ctrl = params->ctrl_regs;
+
+	if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB20_HC_RESETB))
+		USB_CTRL_SET_FAMILY(params, USB_PM, USB20_HC_RESETB);
+
+	if (params->selected_family == BRCM_FAMILY_7366C0)
+		/*
+		 * Don't enable this so the memory controller doesn't read
+		 * into memory holes. NOTE: This bit is low true on 7366C0.
+		 */
+		USB_CTRL_SET_FAMILY(params, EBRIDGE, ESTOP_SCB_REQ);
+
+	/* Setup the endian bits */
+	reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP));
+	reg &= ~USB_CTRL_SETUP_ENDIAN_BITS;
+	reg |= USB_CTRL_MASK_FAMILY(params, SETUP, ENDIAN);
+	brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
+}
+
+void brcm_usb_init_xhci(struct brcm_usb_init_params *params)
+{
+	void __iomem *ctrl = params->ctrl_regs;
+
+	if (BRCM_ID(params->family_id) == 0x7366) {
+		/*
+		 * The PHY3_SOFT_RESETB bits default to the wrong state.
+		 */
+		USB_CTRL_SET(ctrl, USB30_PCTL, PHY3_SOFT_RESETB);
+		USB_CTRL_SET(ctrl, USB30_PCTL, PHY3_SOFT_RESETB_P1);
+	}
+
+	/*
+	 * Kick start USB3 PHY
+	 * Make sure it's low to insure a rising edge.
+	 */
+	USB_CTRL_UNSET(ctrl, USB30_CTL1, PHY3_PLL_SEQ_START);
+	USB_CTRL_SET(ctrl, USB30_CTL1, PHY3_PLL_SEQ_START);
+
+	brcmusb_usb3_phy_workarounds(params);
+	brcmusb_xhci_soft_reset(params, 0);
+	brcmusb_usb3_otp_fix(params);
+}
+
+void brcm_usb_uninit_common(struct brcm_usb_init_params *params)
+{
+	if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN))
+		USB_CTRL_SET_FAMILY(params, USB_PM, USB_PWRDN);
+
+	if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN))
+		USB_CTRL_SET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN);
+}
+
+void brcm_usb_uninit_eohci(struct brcm_usb_init_params *params)
+{
+	if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB20_HC_RESETB))
+		USB_CTRL_UNSET_FAMILY(params, USB_PM, USB20_HC_RESETB);
+}
+
+void brcm_usb_uninit_xhci(struct brcm_usb_init_params *params)
+{
+	brcmusb_xhci_soft_reset(params, 1);
+}
+
+void brcm_usb_set_family_map(struct brcm_usb_init_params *params)
+{
+	int fam;
+
+	fam = brcmusb_get_family_type(params);
+	params->selected_family = fam;
+	params->usb_reg_bits_map =
+		&usb_reg_bits_map_table[fam][0];
+	params->family_name = family_names[fam];
+}
diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.h b/drivers/phy/broadcom/phy-brcm-usb-init.h
new file mode 100644
index 000000000000..bb77b863885e
--- /dev/null
+++ b/drivers/phy/broadcom/phy-brcm-usb-init.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2014-2017 Broadcom
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _USB_BRCM_COMMON_INIT_H
+#define _USB_BRCM_COMMON_INIT_H
+
+#define USB_CTLR_MODE_HOST 0
+#define USB_CTLR_MODE_DEVICE 1
+#define USB_CTLR_MODE_DRD 2
+#define USB_CTLR_MODE_TYPEC_PD 3
+
+struct  brcm_usb_init_params;
+
+struct  brcm_usb_init_params {
+	void __iomem *ctrl_regs;
+	void __iomem *xhci_ec_regs;
+	int ioc;
+	int ipp;
+	int mode;
+	u32 family_id;
+	u32 product_id;
+	int selected_family;
+	const char *family_name;
+	const u32 *usb_reg_bits_map;
+};
+
+void brcm_usb_set_family_map(struct brcm_usb_init_params *params);
+int brcm_usb_init_get_dual_select(struct brcm_usb_init_params *params);
+void brcm_usb_init_set_dual_select(struct brcm_usb_init_params *params,
+				   int mode);
+
+void brcm_usb_init_ipp(struct brcm_usb_init_params *ini);
+void brcm_usb_init_common(struct brcm_usb_init_params *ini);
+void brcm_usb_init_eohci(struct brcm_usb_init_params *ini);
+void brcm_usb_init_xhci(struct brcm_usb_init_params *ini);
+void brcm_usb_uninit_common(struct brcm_usb_init_params *ini);
+void brcm_usb_uninit_eohci(struct brcm_usb_init_params *ini);
+void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini);
+
+#endif /* _USB_BRCM_COMMON_INIT_H */
diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c
new file mode 100644
index 000000000000..195b98139e5f
--- /dev/null
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
@@ -0,0 +1,459 @@
+/*
+ * phy-brcm-usb.c - Broadcom USB Phy Driver
+ *
+ * Copyright (C) 2015-2017 Broadcom
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/soc/brcmstb/brcmstb.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "phy-brcm-usb-init.h"
+
+static DEFINE_MUTEX(sysfs_lock);
+
+enum brcm_usb_phy_id {
+	BRCM_USB_PHY_2_0 = 0,
+	BRCM_USB_PHY_3_0,
+	BRCM_USB_PHY_ID_MAX
+};
+
+struct value_to_name_map {
+	int value;
+	const char *name;
+};
+
+static struct value_to_name_map brcm_dr_mode_to_name[] = {
+	{ USB_CTLR_MODE_HOST, "host" },
+	{ USB_CTLR_MODE_DEVICE, "peripheral" },
+	{ USB_CTLR_MODE_DRD, "drd" },
+	{ USB_CTLR_MODE_TYPEC_PD, "typec-pd" }
+};
+
+static struct value_to_name_map brcm_dual_mode_to_name[] = {
+	{ 0, "host" },
+	{ 1, "device" },
+	{ 2, "auto" },
+};
+
+struct brcm_usb_phy {
+	struct phy *phy;
+	unsigned int id;
+	bool inited;
+};
+
+struct brcm_usb_phy_data {
+	struct  brcm_usb_init_params ini;
+	bool			has_eohci;
+	bool			has_xhci;
+	struct clk		*usb_20_clk;
+	struct clk		*usb_30_clk;
+	struct mutex		mutex;	/* serialize phy init */
+	int			init_count;
+	struct brcm_usb_phy	phys[BRCM_USB_PHY_ID_MAX];
+};
+
+static int brcm_usb_phy_init(struct phy *gphy)
+{
+	struct brcm_usb_phy *phy = phy_get_drvdata(gphy);
+	struct brcm_usb_phy_data *priv =
+		container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
+
+	/*
+	 * Use a lock to make sure a second caller waits until
+	 * the base phy is inited before using it.
+	 */
+	mutex_lock(&priv->mutex);
+	if (priv->init_count++ == 0) {
+		clk_enable(priv->usb_20_clk);
+		clk_enable(priv->usb_30_clk);
+		brcm_usb_init_common(&priv->ini);
+	}
+	mutex_unlock(&priv->mutex);
+	if (phy->id == BRCM_USB_PHY_2_0)
+		brcm_usb_init_eohci(&priv->ini);
+	else if (phy->id == BRCM_USB_PHY_3_0)
+		brcm_usb_init_xhci(&priv->ini);
+	phy->inited = true;
+	dev_dbg(&gphy->dev, "INIT, id: %d, total: %d\n", phy->id,
+		priv->init_count);
+
+	return 0;
+}
+
+static int brcm_usb_phy_exit(struct phy *gphy)
+{
+	struct brcm_usb_phy *phy = phy_get_drvdata(gphy);
+	struct brcm_usb_phy_data *priv =
+		container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
+
+	dev_dbg(&gphy->dev, "EXIT\n");
+	if (phy->id == BRCM_USB_PHY_2_0)
+		brcm_usb_uninit_eohci(&priv->ini);
+	if (phy->id == BRCM_USB_PHY_3_0)
+		brcm_usb_uninit_xhci(&priv->ini);
+
+	/* If both xhci and eohci are gone, reset everything else */
+	mutex_lock(&priv->mutex);
+	if (--priv->init_count == 0) {
+		brcm_usb_uninit_common(&priv->ini);
+		clk_disable(priv->usb_20_clk);
+		clk_disable(priv->usb_30_clk);
+	}
+	mutex_unlock(&priv->mutex);
+	phy->inited = false;
+	return 0;
+}
+
+static struct phy_ops brcm_usb_phy_ops = {
+	.init		= brcm_usb_phy_init,
+	.exit		= brcm_usb_phy_exit,
+	.owner		= THIS_MODULE,
+};
+
+static struct phy *brcm_usb_phy_xlate(struct device *dev,
+				      struct of_phandle_args *args)
+{
+	struct brcm_usb_phy_data *data = dev_get_drvdata(dev);
+
+	/*
+	 * values 0 and 1 are for backward compatibility with
+	 * device tree nodes from older bootloaders.
+	 */
+	switch (args->args[0]) {
+	case 0:
+	case PHY_TYPE_USB2:
+		if (data->phys[BRCM_USB_PHY_2_0].phy)
+			return data->phys[BRCM_USB_PHY_2_0].phy;
+		dev_warn(dev, "Error, 2.0 Phy not found\n");
+		break;
+	case 1:
+	case PHY_TYPE_USB3:
+		if (data->phys[BRCM_USB_PHY_3_0].phy)
+			return data->phys[BRCM_USB_PHY_3_0].phy;
+		dev_warn(dev, "Error, 3.0 Phy not found\n");
+		break;
+	}
+	return ERR_PTR(-ENODEV);
+}
+
+static int name_to_value(struct value_to_name_map *table, int count,
+			 const char *name, int *value)
+{
+	int x;
+
+	*value = 0;
+	for (x = 0; x < count; x++) {
+		if (sysfs_streq(name, table[x].name)) {
+			*value = x;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static const char *value_to_name(struct value_to_name_map *table, int count,
+				 int value)
+{
+	if (value >= count)
+		return "unknown";
+	return table[value].name;
+}
+
+static ssize_t dr_mode_show(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n",
+		value_to_name(&brcm_dr_mode_to_name[0],
+			      ARRAY_SIZE(brcm_dr_mode_to_name),
+			      priv->ini.mode));
+}
+static DEVICE_ATTR_RO(dr_mode);
+
+static ssize_t dual_select_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t len)
+{
+	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
+	int value;
+	int res;
+
+	mutex_lock(&sysfs_lock);
+	res = name_to_value(&brcm_dual_mode_to_name[0],
+			    ARRAY_SIZE(brcm_dual_mode_to_name), buf, &value);
+	if (!res) {
+		brcm_usb_init_set_dual_select(&priv->ini, value);
+		res = len;
+	}
+	mutex_unlock(&sysfs_lock);
+	return res;
+}
+
+static ssize_t dual_select_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
+	int value;
+
+	mutex_lock(&sysfs_lock);
+	value = brcm_usb_init_get_dual_select(&priv->ini);
+	mutex_unlock(&sysfs_lock);
+	return sprintf(buf, "%s\n",
+		value_to_name(&brcm_dual_mode_to_name[0],
+			      ARRAY_SIZE(brcm_dual_mode_to_name),
+			      value));
+}
+static DEVICE_ATTR_RW(dual_select);
+
+static struct attribute *brcm_usb_phy_attrs[] = {
+	&dev_attr_dr_mode.attr,
+	&dev_attr_dual_select.attr,
+	NULL
+};
+
+static const struct attribute_group brcm_usb_phy_group = {
+	.attrs = brcm_usb_phy_attrs,
+};
+
+static int brcm_usb_phy_dvr_init(struct device *dev,
+				 struct brcm_usb_phy_data *priv,
+				 struct device_node *dn)
+{
+	struct phy *gphy;
+	int err;
+
+	priv->usb_20_clk = of_clk_get_by_name(dn, "sw_usb");
+	if (IS_ERR(priv->usb_20_clk)) {
+		dev_info(dev, "Clock not found in Device Tree\n");
+		priv->usb_20_clk = NULL;
+	}
+	err = clk_prepare_enable(priv->usb_20_clk);
+	if (err)
+		return err;
+
+	if (priv->has_eohci) {
+		gphy = devm_phy_create(dev, NULL, &brcm_usb_phy_ops);
+		if (IS_ERR(gphy)) {
+			dev_err(dev, "failed to create EHCI/OHCI PHY\n");
+			return PTR_ERR(gphy);
+		}
+		priv->phys[BRCM_USB_PHY_2_0].phy = gphy;
+		priv->phys[BRCM_USB_PHY_2_0].id = BRCM_USB_PHY_2_0;
+		phy_set_drvdata(gphy, &priv->phys[BRCM_USB_PHY_2_0]);
+	}
+
+	if (priv->has_xhci) {
+		gphy = devm_phy_create(dev, NULL, &brcm_usb_phy_ops);
+		if (IS_ERR(gphy)) {
+			dev_err(dev, "failed to create XHCI PHY\n");
+			return PTR_ERR(gphy);
+		}
+		priv->phys[BRCM_USB_PHY_3_0].phy = gphy;
+		priv->phys[BRCM_USB_PHY_3_0].id = BRCM_USB_PHY_3_0;
+		phy_set_drvdata(gphy, &priv->phys[BRCM_USB_PHY_3_0]);
+
+		priv->usb_30_clk = of_clk_get_by_name(dn, "sw_usb3");
+		if (IS_ERR(priv->usb_30_clk)) {
+			dev_info(dev,
+				 "USB3.0 clock not found in Device Tree\n");
+			priv->usb_30_clk = NULL;
+		}
+		err = clk_prepare_enable(priv->usb_30_clk);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+static int brcm_usb_phy_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct brcm_usb_phy_data *priv;
+	struct phy_provider *phy_provider;
+	struct device_node *dn = pdev->dev.of_node;
+	int err;
+	const char *mode;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, priv);
+
+	priv->ini.family_id = brcmstb_get_family_id();
+	priv->ini.product_id = brcmstb_get_product_id();
+	brcm_usb_set_family_map(&priv->ini);
+	dev_dbg(dev, "Best mapping table is for %s\n",
+		priv->ini.family_name);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "can't get USB_CTRL base address\n");
+		return -EINVAL;
+	}
+	priv->ini.ctrl_regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->ini.ctrl_regs)) {
+		dev_err(dev, "can't map CTRL register space\n");
+		return -EINVAL;
+	}
+
+	/* The XHCI EC registers are optional */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res) {
+		priv->ini.xhci_ec_regs =
+			devm_ioremap_resource(dev, res);
+		if (IS_ERR(priv->ini.xhci_ec_regs)) {
+			dev_err(dev, "can't map XHCI EC register space\n");
+			return -EINVAL;
+		}
+	}
+
+	of_property_read_u32(dn, "brcm,ipp", &priv->ini.ipp);
+	of_property_read_u32(dn, "brcm,ioc", &priv->ini.ioc);
+
+	priv->ini.mode = USB_CTLR_MODE_HOST;
+	err = of_property_read_string(dn, "dr_mode", &mode);
+	if (err == 0) {
+		name_to_value(&brcm_dr_mode_to_name[0],
+			      ARRAY_SIZE(brcm_dr_mode_to_name),
+			mode, &priv->ini.mode);
+	}
+	if (of_property_read_bool(dn, "brcm,has_xhci"))
+		priv->has_xhci = true;
+	if (of_property_read_bool(dn, "brcm,has_eohci"))
+		priv->has_eohci = true;
+
+	err = brcm_usb_phy_dvr_init(dev, priv, dn);
+	if (err)
+		return err;
+
+	mutex_init(&priv->mutex);
+
+	/* make sure invert settings are correct */
+	brcm_usb_init_ipp(&priv->ini);
+
+	/*
+	 * Create sysfs entries for mode.
+	 * Remove "dual_select" attribute if not in dual mode
+	 */
+	if (priv->ini.mode != USB_CTLR_MODE_DRD)
+		brcm_usb_phy_attrs[1] = NULL;
+	err = sysfs_create_group(&dev->kobj, &brcm_usb_phy_group);
+	if (err)
+		dev_warn(dev, "Error creating sysfs attributes\n");
+
+	/* start with everything off */
+	if (priv->has_xhci)
+		brcm_usb_uninit_xhci(&priv->ini);
+	if (priv->has_eohci)
+		brcm_usb_uninit_eohci(&priv->ini);
+	brcm_usb_uninit_common(&priv->ini);
+	clk_disable(priv->usb_20_clk);
+	clk_disable(priv->usb_30_clk);
+
+	phy_provider = devm_of_phy_provider_register(dev, brcm_usb_phy_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int brcm_usb_phy_suspend(struct device *dev)
+{
+	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
+
+	if (priv->init_count) {
+		clk_disable(priv->usb_20_clk);
+		clk_disable(priv->usb_30_clk);
+	}
+	return 0;
+}
+
+static int brcm_usb_phy_resume(struct device *dev)
+{
+	struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
+
+	clk_enable(priv->usb_20_clk);
+	clk_enable(priv->usb_30_clk);
+	brcm_usb_init_ipp(&priv->ini);
+
+	/*
+	 * Initialize anything that was previously initialized.
+	 * Uninitialize anything that wasn't previously initialized.
+	 */
+	if (priv->init_count) {
+		brcm_usb_init_common(&priv->ini);
+		if (priv->phys[BRCM_USB_PHY_2_0].inited) {
+			brcm_usb_init_eohci(&priv->ini);
+		} else if (priv->has_eohci) {
+			brcm_usb_uninit_eohci(&priv->ini);
+			clk_disable(priv->usb_20_clk);
+		}
+		if (priv->phys[BRCM_USB_PHY_3_0].inited) {
+			brcm_usb_init_xhci(&priv->ini);
+		} else if (priv->has_xhci) {
+			brcm_usb_uninit_xhci(&priv->ini);
+			clk_disable(priv->usb_30_clk);
+		}
+	} else {
+		if (priv->has_xhci)
+			brcm_usb_uninit_xhci(&priv->ini);
+		if (priv->has_eohci)
+			brcm_usb_uninit_eohci(&priv->ini);
+		brcm_usb_uninit_common(&priv->ini);
+		clk_disable(priv->usb_20_clk);
+		clk_disable(priv->usb_30_clk);
+	}
+
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops brcm_usb_phy_pm_ops = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(brcm_usb_phy_suspend, brcm_usb_phy_resume)
+};
+
+static const struct of_device_id brcm_usb_dt_ids[] = {
+	{ .compatible = "brcm,brcmstb-usb-phy" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, brcm_usb_dt_ids);
+
+static struct platform_driver brcm_usb_driver = {
+	.probe		= brcm_usb_phy_probe,
+	.driver		= {
+		.name	= "brcmstb-usb-phy",
+		.owner	= THIS_MODULE,
+		.pm = &brcm_usb_phy_pm_ops,
+		.of_match_table = brcm_usb_dt_ids,
+	},
+};
+
+module_platform_driver(brcm_usb_driver);
+
+MODULE_ALIAS("platform:brcmstb-usb-phy");
+MODULE_AUTHOR("Al Cooper <acooper@broadcom.com>");
+MODULE_DESCRIPTION("BRCM USB PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
index 89c887ea5557..a0d522154cdf 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
@@ -154,7 +154,6 @@ struct mvebu_comphy_priv {
 	void __iomem *base;
 	struct regmap *regmap;
 	struct device *dev;
-	int modes[MVEBU_COMPHY_LANES];
 };
 
 struct mvebu_comphy_lane {
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index 721a2a1c97ef..402385f2562a 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -96,9 +96,11 @@
 
 #define U3P_U2PHYDTM1		0x06C
 #define P2C_RG_UART_EN			BIT(16)
+#define P2C_FORCE_IDDIG		BIT(9)
 #define P2C_RG_VBUSVALID		BIT(5)
 #define P2C_RG_SESSEND			BIT(4)
 #define P2C_RG_AVALID			BIT(2)
+#define P2C_RG_IDDIG			BIT(1)
 
 #define U3P_U3_CHIP_GPIO_CTLD		0x0c
 #define P3C_REG_IP_SW_RST		BIT(31)
@@ -585,6 +587,31 @@ static void u2_phy_instance_exit(struct mtk_tphy *tphy,
 	}
 }
 
+static void u2_phy_instance_set_mode(struct mtk_tphy *tphy,
+				     struct mtk_phy_instance *instance,
+				     enum phy_mode mode)
+{
+	struct u2phy_banks *u2_banks = &instance->u2_banks;
+	u32 tmp;
+
+	tmp = readl(u2_banks->com + U3P_U2PHYDTM1);
+	switch (mode) {
+	case PHY_MODE_USB_DEVICE:
+		tmp |= P2C_FORCE_IDDIG | P2C_RG_IDDIG;
+		break;
+	case PHY_MODE_USB_HOST:
+		tmp |= P2C_FORCE_IDDIG;
+		tmp &= ~P2C_RG_IDDIG;
+		break;
+	case PHY_MODE_USB_OTG:
+		tmp &= ~(P2C_FORCE_IDDIG | P2C_RG_IDDIG);
+		break;
+	default:
+		return;
+	}
+	writel(tmp, u2_banks->com + U3P_U2PHYDTM1);
+}
+
 static void pcie_phy_instance_init(struct mtk_tphy *tphy,
 	struct mtk_phy_instance *instance)
 {
@@ -881,6 +908,17 @@ static int mtk_phy_exit(struct phy *phy)
 	return 0;
 }
 
+static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode)
+{
+	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+	struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+
+	if (instance->type == PHY_TYPE_USB2)
+		u2_phy_instance_set_mode(tphy, instance, mode);
+
+	return 0;
+}
+
 static struct phy *mtk_phy_xlate(struct device *dev,
 					struct of_phandle_args *args)
 {
@@ -931,6 +969,7 @@ static const struct phy_ops mtk_tphy_ops = {
 	.exit		= mtk_phy_exit,
 	.power_on	= mtk_phy_power_on,
 	.power_off	= mtk_phy_power_off,
+	.set_mode	= mtk_phy_set_mode,
 	.owner		= THIS_MODULE,
 };
 
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index a268f4d6f3e9..b4964b067aec 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -372,6 +372,21 @@ int phy_reset(struct phy *phy)
 }
 EXPORT_SYMBOL_GPL(phy_reset);
 
+int phy_calibrate(struct phy *phy)
+{
+	int ret;
+
+	if (!phy || !phy->ops->calibrate)
+		return 0;
+
+	mutex_lock(&phy->mutex);
+	ret = phy->ops->calibrate(phy);
+	mutex_unlock(&phy->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_calibrate);
+
 /**
  * _of_phy_get() - lookup and obtain a reference to a phy by phandle
  * @np: device_node for which to get the phy
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-i.h b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
index 13b02b7de30b..822c83b8efcd 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs-i.h
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
@@ -114,14 +114,16 @@ struct ufs_qcom_phy {
 	struct ufs_qcom_phy_calibration *cached_regs;
 	int cached_regs_table_size;
 	bool is_powered_on;
+	bool is_started;
 	struct ufs_qcom_phy_specific_ops *phy_spec_ops;
+
+	enum phy_mode mode;
 };
 
 /**
  * struct ufs_qcom_phy_specific_ops - set of pointers to functions which have a
  * specific implementation per phy. Each UFS phy, should implement
  * those functions according to its spec and requirements
- * @calibrate_phy: pointer to a function that calibrate the phy
  * @start_serdes: pointer to a function that starts the serdes
  * @is_physical_coding_sublayer_ready: pointer to a function that
  * checks pcs readiness. returns 0 for success and non-zero for error.
@@ -130,7 +132,6 @@ struct ufs_qcom_phy {
  * and writes to QSERDES_RX_SIGDET_CNTRL attribute
  */
 struct ufs_qcom_phy_specific_ops {
-	int (*calibrate_phy)(struct ufs_qcom_phy *phy, bool is_rate_B);
 	void (*start_serdes)(struct ufs_qcom_phy *phy);
 	int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy);
 	void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val);
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
index 12a1b498dc4b..ba1895b76a5d 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
@@ -44,7 +44,19 @@ void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
 
 static int ufs_qcom_phy_qmp_14nm_init(struct phy *generic_phy)
 {
-	return 0;
+	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+	bool is_rate_B = false;
+	int ret;
+
+	if (phy_common->mode == PHY_MODE_UFS_HS_B)
+		is_rate_B = true;
+
+	ret = ufs_qcom_phy_qmp_14nm_phy_calibrate(phy_common, is_rate_B);
+	if (!ret)
+		/* phy calibrated, but yet to be started */
+		phy_common->is_started = false;
+
+	return ret;
 }
 
 static int ufs_qcom_phy_qmp_14nm_exit(struct phy *generic_phy)
@@ -53,6 +65,19 @@ static int ufs_qcom_phy_qmp_14nm_exit(struct phy *generic_phy)
 }
 
 static
+int ufs_qcom_phy_qmp_14nm_set_mode(struct phy *generic_phy, enum phy_mode mode)
+{
+	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+
+	phy_common->mode = PHY_MODE_INVALID;
+
+	if (mode > 0)
+		phy_common->mode = mode;
+
+	return 0;
+}
+
+static
 void ufs_qcom_phy_qmp_14nm_power_control(struct ufs_qcom_phy *phy, bool val)
 {
 	writel_relaxed(val ? 0x1 : 0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
@@ -102,11 +127,11 @@ static const struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = {
 	.exit		= ufs_qcom_phy_qmp_14nm_exit,
 	.power_on	= ufs_qcom_phy_power_on,
 	.power_off	= ufs_qcom_phy_power_off,
+	.set_mode	= ufs_qcom_phy_qmp_14nm_set_mode,
 	.owner		= THIS_MODULE,
 };
 
 static struct ufs_qcom_phy_specific_ops phy_14nm_ops = {
-	.calibrate_phy		= ufs_qcom_phy_qmp_14nm_phy_calibrate,
 	.start_serdes		= ufs_qcom_phy_qmp_14nm_start_serdes,
 	.is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_14nm_is_pcs_ready,
 	.set_tx_lane_enable	= ufs_qcom_phy_qmp_14nm_set_tx_lane_enable,
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
index 4f68acb58b73..49f435c71147 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
@@ -63,7 +63,19 @@ void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
 
 static int ufs_qcom_phy_qmp_20nm_init(struct phy *generic_phy)
 {
-	return 0;
+	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+	bool is_rate_B = false;
+	int ret;
+
+	if (phy_common->mode == PHY_MODE_UFS_HS_B)
+		is_rate_B = true;
+
+	ret = ufs_qcom_phy_qmp_20nm_phy_calibrate(phy_common, is_rate_B);
+	if (!ret)
+		/* phy calibrated, but yet to be started */
+		phy_common->is_started = false;
+
+	return ret;
 }
 
 static int ufs_qcom_phy_qmp_20nm_exit(struct phy *generic_phy)
@@ -72,6 +84,19 @@ static int ufs_qcom_phy_qmp_20nm_exit(struct phy *generic_phy)
 }
 
 static
+int ufs_qcom_phy_qmp_20nm_set_mode(struct phy *generic_phy, enum phy_mode mode)
+{
+	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+
+	phy_common->mode = PHY_MODE_INVALID;
+
+	if (mode > 0)
+		phy_common->mode = mode;
+
+	return 0;
+}
+
+static
 void ufs_qcom_phy_qmp_20nm_power_control(struct ufs_qcom_phy *phy, bool val)
 {
 	bool hibern8_exit_after_pwr_collapse = phy->quirks &
@@ -160,11 +185,11 @@ static const struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = {
 	.exit		= ufs_qcom_phy_qmp_20nm_exit,
 	.power_on	= ufs_qcom_phy_power_on,
 	.power_off	= ufs_qcom_phy_power_off,
+	.set_mode	= ufs_qcom_phy_qmp_20nm_set_mode,
 	.owner		= THIS_MODULE,
 };
 
 static struct ufs_qcom_phy_specific_ops phy_20nm_ops = {
-	.calibrate_phy		= ufs_qcom_phy_qmp_20nm_phy_calibrate,
 	.start_serdes		= ufs_qcom_phy_qmp_20nm_start_serdes,
 	.is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_20nm_is_pcs_ready,
 	.set_tx_lane_enable	= ufs_qcom_phy_qmp_20nm_set_tx_lane_enable,
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs.c b/drivers/phy/qualcomm/phy-qcom-ufs.c
index 43865ef340e2..c5ff4525edef 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs.c
@@ -518,9 +518,8 @@ void ufs_qcom_phy_disable_iface_clk(struct ufs_qcom_phy *phy)
 	}
 }
 
-int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
+static int ufs_qcom_phy_start_serdes(struct ufs_qcom_phy *ufs_qcom_phy)
 {
-	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
 	int ret = 0;
 
 	if (!ufs_qcom_phy->phy_spec_ops->start_serdes) {
@@ -533,7 +532,6 @@ int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_start_serdes);
 
 int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes)
 {
@@ -564,31 +562,8 @@ void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
 }
 EXPORT_SYMBOL_GPL(ufs_qcom_phy_save_controller_version);
 
-int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B)
-{
-	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
-	int ret = 0;
-
-	if (!ufs_qcom_phy->phy_spec_ops->calibrate_phy) {
-		dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() callback is not supported\n",
-			__func__);
-		ret = -ENOTSUPP;
-	} else {
-		ret = ufs_qcom_phy->phy_spec_ops->
-				calibrate_phy(ufs_qcom_phy, is_rate_B);
-		if (ret)
-			dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() failed %d\n",
-				__func__, ret);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate_phy);
-
-int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
+static int ufs_qcom_phy_is_pcs_ready(struct ufs_qcom_phy *ufs_qcom_phy)
 {
-	struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
-
 	if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready) {
 		dev_err(ufs_qcom_phy->dev, "%s: is_physical_coding_sublayer_ready() callback is not supported\n",
 			__func__);
@@ -598,7 +573,6 @@ int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
 	return ufs_qcom_phy->phy_spec_ops->
 			is_physical_coding_sublayer_ready(ufs_qcom_phy);
 }
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_is_pcs_ready);
 
 int ufs_qcom_phy_power_on(struct phy *generic_phy)
 {
@@ -609,6 +583,18 @@ int ufs_qcom_phy_power_on(struct phy *generic_phy)
 	if (phy_common->is_powered_on)
 		return 0;
 
+	if (!phy_common->is_started) {
+		err = ufs_qcom_phy_start_serdes(phy_common);
+		if (err)
+			return err;
+
+		err = ufs_qcom_phy_is_pcs_ready(phy_common);
+		if (err)
+			return err;
+
+		phy_common->is_started = true;
+	}
+
 	err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_phy);
 	if (err) {
 		dev_err(dev, "%s enable vdda_phy failed, err=%d\n",
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 54c34298a000..9c90e7d67e0a 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -1,7 +1,7 @@
 /*
  * Renesas R-Car Gen3 for USB2.0 PHY driver
  *
- * Copyright (C) 2015 Renesas Electronics Corporation
+ * Copyright (C) 2015-2017 Renesas Electronics Corporation
  *
  * This is based on the phy-rcar-gen2 driver:
  * Copyright (C) 2014 Renesas Solutions Corp.
@@ -12,16 +12,18 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
+#include <linux/usb/of.h>
 #include <linux/workqueue.h>
 
 /******* USB2.0 Host registers (original offset is +0x200) *******/
@@ -79,6 +81,8 @@
 #define USB2_ADPCTRL_IDPULLUP		BIT(5)	/* 1 = ID sampling is enabled */
 #define USB2_ADPCTRL_DRVVBUS		BIT(4)
 
+#define RCAR_GEN3_PHY_HAS_DEDICATED_PINS	1
+
 struct rcar_gen3_chan {
 	void __iomem *base;
 	struct extcon_dev *extcon;
@@ -86,7 +90,7 @@ struct rcar_gen3_chan {
 	struct regulator *vbus;
 	struct work_struct work;
 	bool extcon_host;
-	bool has_otg;
+	bool has_otg_pins;
 };
 
 static void rcar_gen3_phy_usb2_work(struct work_struct *work)
@@ -218,33 +222,40 @@ static bool rcar_gen3_is_host(struct rcar_gen3_chan *ch)
 	return !(readl(ch->base + USB2_COMMCTRL) & USB2_COMMCTRL_OTG_PERI);
 }
 
+static enum phy_mode rcar_gen3_get_phy_mode(struct rcar_gen3_chan *ch)
+{
+	if (rcar_gen3_is_host(ch))
+		return PHY_MODE_USB_HOST;
+
+	return PHY_MODE_USB_DEVICE;
+}
+
 static ssize_t role_store(struct device *dev, struct device_attribute *attr,
 			  const char *buf, size_t count)
 {
 	struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
-	bool is_b_device, is_host, new_mode_is_host;
+	bool is_b_device;
+	enum phy_mode cur_mode, new_mode;
 
-	if (!ch->has_otg || !ch->phy->init_count)
+	if (!ch->has_otg_pins || !ch->phy->init_count)
 		return -EIO;
 
-	/*
-	 * is_b_device: true is B-Device. false is A-Device.
-	 * If {new_mode_}is_host: true is Host mode. false is Peripheral mode.
-	 */
-	is_b_device = rcar_gen3_check_id(ch);
-	is_host = rcar_gen3_is_host(ch);
 	if (!strncmp(buf, "host", strlen("host")))
-		new_mode_is_host = true;
+		new_mode = PHY_MODE_USB_HOST;
 	else if (!strncmp(buf, "peripheral", strlen("peripheral")))
-		new_mode_is_host = false;
+		new_mode = PHY_MODE_USB_DEVICE;
 	else
 		return -EINVAL;
 
+	/* is_b_device: true is B-Device. false is A-Device. */
+	is_b_device = rcar_gen3_check_id(ch);
+	cur_mode = rcar_gen3_get_phy_mode(ch);
+
 	/* If current and new mode is the same, this returns the error */
-	if (is_host == new_mode_is_host)
+	if (cur_mode == new_mode)
 		return -EINVAL;
 
-	if (new_mode_is_host) {		/* And is_host must be false */
+	if (new_mode == PHY_MODE_USB_HOST) { /* And is_host must be false */
 		if (!is_b_device)	/* A-Peripheral */
 			rcar_gen3_init_from_a_peri_to_a_host(ch);
 		else			/* B-Peripheral */
@@ -264,7 +275,7 @@ static ssize_t role_show(struct device *dev, struct device_attribute *attr,
 {
 	struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
 
-	if (!ch->has_otg || !ch->phy->init_count)
+	if (!ch->has_otg_pins || !ch->phy->init_count)
 		return -EIO;
 
 	return sprintf(buf, "%s\n", rcar_gen3_is_host(ch) ? "host" :
@@ -303,7 +314,7 @@ static int rcar_gen3_phy_usb2_init(struct phy *p)
 	writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET);
 
 	/* Initialize otg part */
-	if (channel->has_otg)
+	if (channel->has_otg_pins)
 		rcar_gen3_init_otg(channel);
 
 	return 0;
@@ -377,9 +388,17 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
 }
 
 static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
-	{ .compatible = "renesas,usb2-phy-r8a7795" },
-	{ .compatible = "renesas,usb2-phy-r8a7796" },
-	{ .compatible = "renesas,rcar-gen3-usb2-phy" },
+	{
+		.compatible = "renesas,usb2-phy-r8a7795",
+		.data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
+	},
+	{
+		.compatible = "renesas,usb2-phy-r8a7796",
+		.data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
+	},
+	{
+		.compatible = "renesas,rcar-gen3-usb2-phy",
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
@@ -415,14 +434,17 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	/* call request_irq for OTG */
 	irq = platform_get_irq(pdev, 0);
 	if (irq >= 0) {
-		int ret;
-
 		INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work);
 		irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
 				       IRQF_SHARED, dev_name(dev), channel);
 		if (irq < 0)
 			dev_err(dev, "No irq handler (%d)\n", irq);
-		channel->has_otg = true;
+	}
+
+	if (of_usb_get_dr_mode_by_phy(dev->of_node, 0) == USB_DR_MODE_OTG) {
+		int ret;
+
+		channel->has_otg_pins = (uintptr_t)of_device_get_match_data(dev);
 		channel->extcon = devm_extcon_dev_allocate(dev,
 							rcar_gen3_phy_cable);
 		if (IS_ERR(channel->extcon))
@@ -464,7 +486,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 		dev_err(dev, "Failed to register PHY provider\n");
 		ret = PTR_ERR(provider);
 		goto error;
-	} else if (channel->has_otg) {
+	} else if (channel->has_otg_pins) {
 		int ret;
 
 		ret = device_create_file(dev, &dev_attr_role);
@@ -484,7 +506,7 @@ static int rcar_gen3_phy_usb2_remove(struct platform_device *pdev)
 {
 	struct rcar_gen3_chan *channel = platform_get_drvdata(pdev);
 
-	if (channel->has_otg)
+	if (channel->has_otg_pins)
 		device_remove_file(&pdev->dev, &dev_attr_role);
 
 	pm_runtime_disable(&pdev->dev);
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index ee7ce5ee53f9..5049dac79bd0 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -17,7 +17,7 @@
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/gpio/consumer.h>
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
index a958c9bced01..ee85fa0ca4b0 100644
--- a/drivers/phy/rockchip/phy-rockchip-typec.c
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -102,9 +102,40 @@
 #define CMN_PLL1_SS_CTRL1		(0xb8 << 2)
 #define CMN_PLL1_SS_CTRL2		(0xb9 << 2)
 #define CMN_RXCAL_OVRD			(0xd1 << 2)
+
 #define CMN_TXPUCAL_CTRL		(0xe0 << 2)
 #define CMN_TXPUCAL_OVRD		(0xe1 << 2)
+#define CMN_TXPDCAL_CTRL		(0xf0 << 2)
 #define CMN_TXPDCAL_OVRD		(0xf1 << 2)
+
+/* For CMN_TXPUCAL_CTRL, CMN_TXPDCAL_CTRL */
+#define CMN_TXPXCAL_START		BIT(15)
+#define CMN_TXPXCAL_DONE		BIT(14)
+#define CMN_TXPXCAL_NO_RESPONSE		BIT(13)
+#define CMN_TXPXCAL_CURRENT_RESPONSE	BIT(12)
+
+#define CMN_TXPU_ADJ_CTRL		(0x108 << 2)
+#define CMN_TXPD_ADJ_CTRL		(0x10c << 2)
+
+/*
+ * For CMN_TXPUCAL_CTRL, CMN_TXPDCAL_CTRL,
+ *     CMN_TXPU_ADJ_CTRL, CMN_TXPDCAL_CTRL
+ *
+ * NOTE: some of these registers are documented to be 2's complement
+ * signed numbers, but then documented to be always positive.  Weird.
+ * In such a case, using CMN_CALIB_CODE_POS() avoids the unnecessary
+ * sign extension.
+ */
+#define CMN_CALIB_CODE_WIDTH	7
+#define CMN_CALIB_CODE_OFFSET	0
+#define CMN_CALIB_CODE_MASK	GENMASK(CMN_CALIB_CODE_WIDTH, 0)
+#define CMN_CALIB_CODE(x)	\
+	sign_extend32((x) >> CMN_CALIB_CODE_OFFSET, CMN_CALIB_CODE_WIDTH)
+
+#define CMN_CALIB_CODE_POS_MASK	GENMASK(CMN_CALIB_CODE_WIDTH - 1, 0)
+#define CMN_CALIB_CODE_POS(x)	\
+	(((x) >> CMN_CALIB_CODE_OFFSET) & CMN_CALIB_CODE_POS_MASK)
+
 #define CMN_DIAG_PLL0_FBH_OVRD		(0x1c0 << 2)
 #define CMN_DIAG_PLL0_FBL_OVRD		(0x1c1 << 2)
 #define CMN_DIAG_PLL0_OVRD		(0x1c2 << 2)
@@ -138,6 +169,15 @@
 #define TX_TXCC_MGNFS_MULT_101(n)	((0x4055 | ((n) << 9)) << 2)
 #define TX_TXCC_MGNFS_MULT_110(n)	((0x4056 | ((n) << 9)) << 2)
 #define TX_TXCC_MGNFS_MULT_111(n)	((0x4057 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_000(n)	((0x4058 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_001(n)	((0x4059 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_010(n)	((0x405a | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_011(n)	((0x405b | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_100(n)	((0x405c | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_101(n)	((0x405d | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_110(n)	((0x405e | ((n) << 9)) << 2)
+#define TX_TXCC_MGNLS_MULT_111(n)	((0x405f | ((n) << 9)) << 2)
+
 #define XCVR_DIAG_PLLDRC_CTRL(n)	((0x40e0 | ((n) << 9)) << 2)
 #define XCVR_DIAG_BIDI_CTRL(n)		((0x40e8 | ((n) << 9)) << 2)
 #define XCVR_DIAG_LANE_FCM_EN_MGN(n)	((0x40f2 | ((n) << 9)) << 2)
@@ -150,10 +190,63 @@
 #define TX_RCVDET_ST_TMR(n)		((0x4123 | ((n) << 9)) << 2)
 #define TX_DIAG_TX_DRV(n)		((0x41e1 | ((n) << 9)) << 2)
 #define TX_DIAG_BGREF_PREDRV_DELAY	(0x41e7 << 2)
+
+/* Use this for "n" in macros like "_MULT_XXX" to target the aux channel */
+#define AUX_CH_LANE			8
+
 #define TX_ANA_CTRL_REG_1		(0x5020 << 2)
+
+#define TXDA_DP_AUX_EN			BIT(15)
+#define AUXDA_SE_EN			BIT(14)
+#define TXDA_CAL_LATCH_EN		BIT(13)
+#define AUXDA_POLARITY			BIT(12)
+#define TXDA_DRV_POWER_ISOLATION_EN	BIT(11)
+#define TXDA_DRV_POWER_EN_PH_2_N	BIT(10)
+#define TXDA_DRV_POWER_EN_PH_1_N	BIT(9)
+#define TXDA_BGREF_EN			BIT(8)
+#define TXDA_DRV_LDO_EN			BIT(7)
+#define TXDA_DECAP_EN_DEL		BIT(6)
+#define TXDA_DECAP_EN			BIT(5)
+#define TXDA_UPHY_SUPPLY_EN_DEL		BIT(4)
+#define TXDA_UPHY_SUPPLY_EN		BIT(3)
+#define TXDA_LOW_LEAKAGE_EN		BIT(2)
+#define TXDA_DRV_IDLE_LOWI_EN		BIT(1)
+#define TXDA_DRV_CMN_MODE_EN		BIT(0)
+
 #define TX_ANA_CTRL_REG_2		(0x5021 << 2)
+
+#define AUXDA_DEBOUNCING_CLK		BIT(15)
+#define TXDA_LPBK_RECOVERED_CLK_EN	BIT(14)
+#define TXDA_LPBK_ISI_GEN_EN		BIT(13)
+#define TXDA_LPBK_SERIAL_EN		BIT(12)
+#define TXDA_LPBK_LINE_EN		BIT(11)
+#define TXDA_DRV_LDO_REDC_SINKIQ	BIT(10)
+#define XCVR_DECAP_EN_DEL		BIT(9)
+#define XCVR_DECAP_EN			BIT(8)
+#define TXDA_MPHY_ENABLE_HS_NT		BIT(7)
+#define TXDA_MPHY_SA_MODE		BIT(6)
+#define TXDA_DRV_LDO_RBYR_FB_EN		BIT(5)
+#define TXDA_DRV_RST_PULL_DOWN		BIT(4)
+#define TXDA_DRV_LDO_BG_FB_EN		BIT(3)
+#define TXDA_DRV_LDO_BG_REF_EN		BIT(2)
+#define TXDA_DRV_PREDRV_EN_DEL		BIT(1)
+#define TXDA_DRV_PREDRV_EN		BIT(0)
+
 #define TXDA_COEFF_CALC_CTRL		(0x5022 << 2)
+
+#define TX_HIGH_Z			BIT(6)
+#define TX_VMARGIN_OFFSET		3
+#define TX_VMARGIN_MASK			0x7
+#define LOW_POWER_SWING_EN		BIT(2)
+#define TX_FCM_DRV_MAIN_EN		BIT(1)
+#define TX_FCM_FULL_MARGIN		BIT(0)
+
 #define TX_DIG_CTRL_REG_2		(0x5024 << 2)
+
+#define TX_HIGH_Z_TM_EN			BIT(15)
+#define TX_RESCAL_CODE_OFFSET		0
+#define TX_RESCAL_CODE_MASK		0x3f
+
 #define TXDA_CYA_AUXDA_CYA		(0x5025 << 2)
 #define TX_ANA_CTRL_REG_3		(0x5026 << 2)
 #define TX_ANA_CTRL_REG_4		(0x5027 << 2)
@@ -456,54 +549,72 @@ static void tcphy_dp_aux_set_flip(struct rockchip_typec_phy *tcphy)
 	 */
 	tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1);
 	if (!tcphy->flip)
-		tx_ana_ctrl_reg_1 |= BIT(12);
+		tx_ana_ctrl_reg_1 |= AUXDA_POLARITY;
 	else
-		tx_ana_ctrl_reg_1 &= ~BIT(12);
+		tx_ana_ctrl_reg_1 &= ~AUXDA_POLARITY;
 	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
 }
 
 static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
 {
+	u16 val;
 	u16 tx_ana_ctrl_reg_1;
-	u16 rdata, rdata2, val;
-
-	/* disable txda_cal_latch_en for rewrite the calibration values */
-	tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1);
-	tx_ana_ctrl_reg_1 &= ~BIT(13);
-	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+	u16 tx_ana_ctrl_reg_2;
+	s32 pu_calib_code, pd_calib_code;
+	s32 pu_adj, pd_adj;
+	u16 calib;
 
 	/*
-	 * read a resistor calibration code from CMN_TXPUCAL_CTRL[6:0] and
-	 * write it to TX_DIG_CTRL_REG_2[6:0], and delay 1ms to make sure it
-	 * works.
+	 * Calculate calibration code as per docs: use an average of the
+	 * pull down and pull up.  Then add in adjustments.
 	 */
-	rdata = readl(tcphy->base + TX_DIG_CTRL_REG_2);
-	rdata = rdata & 0xffc0;
+	val = readl(tcphy->base + CMN_TXPUCAL_CTRL);
+	pu_calib_code = CMN_CALIB_CODE_POS(val);
+	val = readl(tcphy->base + CMN_TXPDCAL_CTRL);
+	pd_calib_code = CMN_CALIB_CODE_POS(val);
+	val = readl(tcphy->base + CMN_TXPU_ADJ_CTRL);
+	pu_adj = CMN_CALIB_CODE(val);
+	val = readl(tcphy->base + CMN_TXPD_ADJ_CTRL);
+	pd_adj = CMN_CALIB_CODE(val);
+	calib = (pu_calib_code + pd_calib_code) / 2 + pu_adj + pd_adj;
 
-	rdata2 = readl(tcphy->base + CMN_TXPUCAL_CTRL);
-	rdata2 = rdata2 & 0x3f;
+	/* disable txda_cal_latch_en for rewrite the calibration values */
+	tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+	tx_ana_ctrl_reg_1 &= ~TXDA_CAL_LATCH_EN;
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
 
-	val = rdata | rdata2;
+	/* write the calibration, then delay 10 ms as sample in docs */
+	val = readl(tcphy->base + TX_DIG_CTRL_REG_2);
+	val &= ~(TX_RESCAL_CODE_MASK << TX_RESCAL_CODE_OFFSET);
+	val |= calib << TX_RESCAL_CODE_OFFSET;
 	writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
-	usleep_range(1000, 1050);
+	usleep_range(10000, 10050);
 
 	/*
 	 * Enable signal for latch that sample and holds calibration values.
 	 * Activate this signal for 1 clock cycle to sample new calibration
 	 * values.
 	 */
-	tx_ana_ctrl_reg_1 |= BIT(13);
+	tx_ana_ctrl_reg_1 |= TXDA_CAL_LATCH_EN;
 	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
 	usleep_range(150, 200);
 
 	/* set TX Voltage Level and TX Deemphasis to 0 */
 	writel(0, tcphy->base + PHY_DP_TX_CTL);
+
 	/* re-enable decap */
-	writel(0x100, tcphy->base + TX_ANA_CTRL_REG_2);
-	writel(0x300, tcphy->base + TX_ANA_CTRL_REG_2);
-	tx_ana_ctrl_reg_1 |= BIT(3);
+	tx_ana_ctrl_reg_2 = XCVR_DECAP_EN;
+	writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
+	udelay(1);
+	tx_ana_ctrl_reg_2 |= XCVR_DECAP_EN_DEL;
+	writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
+
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_3);
+
+	tx_ana_ctrl_reg_1 |= TXDA_UPHY_SUPPLY_EN;
 	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
-	tx_ana_ctrl_reg_1 |= BIT(4);
+	udelay(1);
+	tx_ana_ctrl_reg_1 |= TXDA_UPHY_SUPPLY_EN_DEL;
 	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
 
 	writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
@@ -515,44 +626,66 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
 	writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4);
 
 	/* re-enables Bandgap reference for LDO */
-	tx_ana_ctrl_reg_1 |= BIT(7);
+	tx_ana_ctrl_reg_1 |= TXDA_DRV_LDO_EN;
 	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
-	tx_ana_ctrl_reg_1 |= BIT(8);
+	udelay(5);
+	tx_ana_ctrl_reg_1 |= TXDA_BGREF_EN;
 	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
 
 	/*
 	 * re-enables the transmitter pre-driver, driver data selection MUX,
 	 * and receiver detect circuits.
 	 */
-	writel(0x301, tcphy->base + TX_ANA_CTRL_REG_2);
-	writel(0x303, tcphy->base + TX_ANA_CTRL_REG_2);
+	tx_ana_ctrl_reg_2 |= TXDA_DRV_PREDRV_EN;
+	writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
+	udelay(1);
+	tx_ana_ctrl_reg_2 |= TXDA_DRV_PREDRV_EN_DEL;
+	writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2);
 
 	/*
-	 * Do some magic undocumented stuff, some of which appears to
-	 * undo the "re-enables Bandgap reference for LDO" above.
+	 * Do all the undocumented magic:
+	 * - Turn on TXDA_DP_AUX_EN, whatever that is, even though sample
+	 *   never shows this going on.
+	 * - Turn on TXDA_DECAP_EN (and TXDA_DECAP_EN_DEL) even though
+	 *   docs say for aux it's always 0.
+	 * - Turn off the LDO and BGREF, which we just spent time turning
+	 *   on above (???).
+	 *
+	 * Without this magic, things seem worse.
 	 */
-	tx_ana_ctrl_reg_1 |=  BIT(15);
-	tx_ana_ctrl_reg_1 &= ~BIT(8);
-	tx_ana_ctrl_reg_1 &= ~BIT(7);
-	tx_ana_ctrl_reg_1 |=  BIT(6);
-	tx_ana_ctrl_reg_1 |=  BIT(5);
+	tx_ana_ctrl_reg_1 |= TXDA_DP_AUX_EN;
+	tx_ana_ctrl_reg_1 |= TXDA_DECAP_EN;
+	tx_ana_ctrl_reg_1 &= ~TXDA_DRV_LDO_EN;
+	tx_ana_ctrl_reg_1 &= ~TXDA_BGREF_EN;
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+	udelay(1);
+	tx_ana_ctrl_reg_1 |= TXDA_DECAP_EN_DEL;
 	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
-
-	writel(0, tcphy->base + TX_ANA_CTRL_REG_3);
-	writel(0, tcphy->base + TX_ANA_CTRL_REG_4);
-	writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
 
 	/*
-	 * Controls low_power_swing_en, don't set the voltage swing of the
-	 * driver to 400mv. The values below are peak to peak (differential)
-	 * values.
+	 * Undo the work we did to set the LDO voltage.
+	 * This doesn't seem to help nor hurt, but it kinda goes with the
+	 * undocumented magic above.
 	 */
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_4);
+
+	/* Don't set voltage swing to 400 mV peak to peak (differential) */
 	writel(0, tcphy->base + TXDA_COEFF_CALC_CTRL);
+
+	/* Init TXDA_CYA_AUXDA_CYA for unknown magic reasons */
 	writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA);
 
-	/* Controls tx_high_z_tm_en */
+	/*
+	 * More undocumented magic, presumably the goal of which is to
+	 * make the "auxda_source_aux_oen" be ignored and instead to decide
+	 * about "high impedance state" based on what software puts in the
+	 * register TXDA_COEFF_CALC_CTRL (see TX_HIGH_Z).  Since we only
+	 * program that register once and we don't set the bit TX_HIGH_Z,
+	 * presumably the goal here is that we should never put the analog
+	 * driver in high impedance state.
+	 */
 	val = readl(tcphy->base + TX_DIG_CTRL_REG_2);
-	val |= BIT(15);
+	val |= TX_HIGH_Z_TM_EN;
 	writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
 }
 
diff --git a/drivers/phy/ti/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c
index 0e564f32749f..68ce4a082b9b 100644
--- a/drivers/phy/ti/phy-ti-pipe3.c
+++ b/drivers/phy/ti/phy-ti-pipe3.c
@@ -68,6 +68,40 @@
 #define PCIE_PCS_MASK			0xFF0000
 #define PCIE_PCS_DELAY_COUNT_SHIFT	0x10
 
+#define PCIEPHYRX_ANA_PROGRAMMABILITY	0x0000000C
+#define INTERFACE_MASK			GENMASK(31, 27)
+#define INTERFACE_SHIFT			27
+#define LOSD_MASK			GENMASK(17, 14)
+#define LOSD_SHIFT			14
+#define MEM_PLLDIV			GENMASK(6, 5)
+
+#define PCIEPHYRX_TRIM			0x0000001C
+#define MEM_DLL_TRIM_SEL		GENMASK(31, 30)
+#define MEM_DLL_TRIM_SHIFT		30
+
+#define PCIEPHYRX_DLL			0x00000024
+#define MEM_DLL_PHINT_RATE		GENMASK(31, 30)
+
+#define PCIEPHYRX_DIGITAL_MODES		0x00000028
+#define MEM_CDR_FASTLOCK		BIT(23)
+#define MEM_CDR_LBW			GENMASK(22, 21)
+#define MEM_CDR_STEPCNT			GENMASK(20, 19)
+#define MEM_CDR_STL_MASK		GENMASK(18, 16)
+#define MEM_CDR_STL_SHIFT		16
+#define MEM_CDR_THR_MASK		GENMASK(15, 13)
+#define MEM_CDR_THR_SHIFT		13
+#define MEM_CDR_THR_MODE		BIT(12)
+#define MEM_CDR_CDR_2NDO_SDM_MODE	BIT(11)
+#define MEM_OVRD_HS_RATE		BIT(26)
+
+#define PCIEPHYRX_EQUALIZER		0x00000038
+#define MEM_EQLEV			GENMASK(31, 16)
+#define MEM_EQFTC			GENMASK(15, 11)
+#define MEM_EQCTL			GENMASK(10, 7)
+#define MEM_EQCTL_SHIFT			7
+#define MEM_OVRD_EQLEV			BIT(2)
+#define MEM_OVRD_EQFTC			BIT(1)
+
 /*
  * This is an Empirical value that works, need to confirm the actual
  * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status
@@ -91,6 +125,8 @@ struct pipe3_dpll_map {
 
 struct ti_pipe3 {
 	void __iomem		*pll_ctrl_base;
+	void __iomem		*phy_rx;
+	void __iomem		*phy_tx;
 	struct device		*dev;
 	struct device		*control_dev;
 	struct clk		*wkupclk;
@@ -261,6 +297,37 @@ static int ti_pipe3_dpll_program(struct ti_pipe3 *phy)
 	return ti_pipe3_dpll_wait_lock(phy);
 }
 
+static void ti_pipe3_calibrate(struct ti_pipe3 *phy)
+{
+	u32 val;
+
+	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_ANA_PROGRAMMABILITY);
+	val &= ~(INTERFACE_MASK | LOSD_MASK | MEM_PLLDIV);
+	val = (0x1 << INTERFACE_SHIFT | 0xA << LOSD_SHIFT);
+	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_ANA_PROGRAMMABILITY, val);
+
+	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_DIGITAL_MODES);
+	val &= ~(MEM_CDR_STEPCNT | MEM_CDR_STL_MASK | MEM_CDR_THR_MASK |
+		 MEM_CDR_CDR_2NDO_SDM_MODE | MEM_OVRD_HS_RATE);
+	val |= (MEM_CDR_FASTLOCK | MEM_CDR_LBW | 0x3 << MEM_CDR_STL_SHIFT |
+		0x1 << MEM_CDR_THR_SHIFT | MEM_CDR_THR_MODE);
+	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_DIGITAL_MODES, val);
+
+	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_TRIM);
+	val &= ~MEM_DLL_TRIM_SEL;
+	val |= 0x2 << MEM_DLL_TRIM_SHIFT;
+	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_TRIM, val);
+
+	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_DLL);
+	val |= MEM_DLL_PHINT_RATE;
+	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_DLL, val);
+
+	val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_EQUALIZER);
+	val &= ~(MEM_EQLEV | MEM_EQCTL | MEM_OVRD_EQLEV | MEM_OVRD_EQFTC);
+	val |= MEM_EQFTC | 0x1 << MEM_EQCTL_SHIFT;
+	ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_EQUALIZER, val);
+}
+
 static int ti_pipe3_init(struct phy *x)
 {
 	struct ti_pipe3 *phy = phy_get_drvdata(x);
@@ -282,7 +349,12 @@ static int ti_pipe3_init(struct phy *x)
 		val = 0x96 << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT;
 		ret = regmap_update_bits(phy->pcs_syscon, phy->pcie_pcs_reg,
 					 PCIE_PCS_MASK, val);
-		return ret;
+		if (ret)
+			return ret;
+
+		ti_pipe3_calibrate(phy);
+
+		return 0;
 	}
 
 	/* Bring it out of IDLE if it is IDLE */
@@ -513,6 +585,29 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
 	return 0;
 }
 
+static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy)
+{
+	struct resource *res;
+	struct device *dev = phy->dev;
+	struct device_node *node = dev->of_node;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie"))
+		return 0;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+					   "phy_rx");
+	phy->phy_rx = devm_ioremap_resource(dev, res);
+	if (IS_ERR(phy->phy_rx))
+		return PTR_ERR(phy->phy_rx);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+					   "phy_tx");
+	phy->phy_tx = devm_ioremap_resource(dev, res);
+
+	return PTR_ERR_OR_ZERO(phy->phy_tx);
+}
+
 static int ti_pipe3_get_pll_base(struct ti_pipe3 *phy)
 {
 	struct resource *res;
@@ -559,6 +654,10 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	ret = ti_pipe3_get_tx_rx_base(phy);
+	if (ret)
+		return ret;
+
 	ret = ti_pipe3_get_sysctrl(phy);
 	if (ret)
 		return ret;
diff --git a/drivers/power/supply/qcom_smbb.c b/drivers/power/supply/qcom_smbb.c
index f6a0d245731d..11de691b9a71 100644
--- a/drivers/power/supply/qcom_smbb.c
+++ b/drivers/power/supply/qcom_smbb.c
@@ -34,7 +34,7 @@
 #include <linux/power_supply.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 #include <linux/regulator/driver.h>
 
 #define SMBB_CHG_VMAX		0x040
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index c87d770b519a..890eafeb8ad4 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -273,15 +273,18 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
 	bool is_rate_B = (UFS_QCOM_LIMIT_HS_RATE == PA_HS_MODE_B)
 							? true : false;
 
+	if (is_rate_B)
+		phy_set_mode(phy, PHY_MODE_UFS_HS_B);
+
 	/* Assert PHY reset and apply PHY calibration values */
 	ufs_qcom_assert_reset(hba);
 	/* provide 1ms delay to let the reset pulse propagate */
 	usleep_range(1000, 1100);
 
-	ret = ufs_qcom_phy_calibrate_phy(phy, is_rate_B);
-
+	/* phy initialization - calibrate the phy */
+	ret = phy_init(phy);
 	if (ret) {
-		dev_err(hba->dev, "%s: ufs_qcom_phy_calibrate_phy() failed, ret = %d\n",
+		dev_err(hba->dev, "%s: phy init failed, ret = %d\n",
 			__func__, ret);
 		goto out;
 	}
@@ -294,21 +297,22 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
 	 * voltage, current to settle down before starting serdes.
 	 */
 	usleep_range(1000, 1100);
-	ret = ufs_qcom_phy_start_serdes(phy);
+
+	/* power on phy - start serdes and phy's power and clocks */
+	ret = phy_power_on(phy);
 	if (ret) {
-		dev_err(hba->dev, "%s: ufs_qcom_phy_start_serdes() failed, ret = %d\n",
+		dev_err(hba->dev, "%s: phy power on failed, ret = %d\n",
 			__func__, ret);
-		goto out;
+		goto out_disable_phy;
 	}
 
-	ret = ufs_qcom_phy_is_pcs_ready(phy);
-	if (ret)
-		dev_err(hba->dev,
-			"%s: is_physical_coding_sublayer_ready() failed, ret = %d\n",
-			__func__, ret);
-
 	ufs_qcom_select_unipro_mode(host);
 
+	return 0;
+
+out_disable_phy:
+	ufs_qcom_assert_reset(hba);
+	phy_exit(phy);
 out:
 	return ret;
 }
@@ -1273,14 +1277,9 @@ static int ufs_qcom_init(struct ufs_hba *hba)
 	ufs_qcom_phy_save_controller_version(host->generic_phy,
 		host->hw_ver.major, host->hw_ver.minor, host->hw_ver.step);
 
-	phy_init(host->generic_phy);
-	err = phy_power_on(host->generic_phy);
-	if (err)
-		goto out_unregister_bus;
-
 	err = ufs_qcom_init_lane_clks(host);
 	if (err)
-		goto out_disable_phy;
+		goto out_variant_clear;
 
 	ufs_qcom_set_caps(hba);
 	ufs_qcom_advertise_quirks(hba);
@@ -1301,10 +1300,6 @@ static int ufs_qcom_init(struct ufs_hba *hba)
 
 	goto out;
 
-out_disable_phy:
-	phy_power_off(host->generic_phy);
-out_unregister_bus:
-	phy_exit(host->generic_phy);
 out_variant_clear:
 	ufshcd_set_variant(hba, NULL);
 out:
diff --git a/drivers/soc/bcm/brcmstb/common.c b/drivers/soc/bcm/brcmstb/common.c
index 22e98a90468c..a71730da6385 100644
--- a/drivers/soc/bcm/brcmstb/common.c
+++ b/drivers/soc/bcm/brcmstb/common.c
@@ -40,6 +40,18 @@ bool soc_is_brcmstb(void)
 	return of_match_node(brcmstb_machine_match, root) != NULL;
 }
 
+u32 brcmstb_get_family_id(void)
+{
+	return family_id;
+}
+EXPORT_SYMBOL(brcmstb_get_family_id);
+
+u32 brcmstb_get_product_id(void)
+{
+	return product_id;
+}
+EXPORT_SYMBOL(brcmstb_get_product_id);
+
 static const struct of_device_id sun_top_ctrl_match[] = {
 	{ .compatible = "brcm,bcm7125-sun-top-ctrl", },
 	{ .compatible = "brcm,bcm7346-sun-top-ctrl", },
diff --git a/drivers/staging/wlan-ng/hfa384x_usb.c b/drivers/staging/wlan-ng/hfa384x_usb.c
index 5975d47dfa71..197f5a914e8f 100644
--- a/drivers/staging/wlan-ng/hfa384x_usb.c
+++ b/drivers/staging/wlan-ng/hfa384x_usb.c
@@ -2457,7 +2457,7 @@ int hfa384x_drvr_start(struct hfa384x *hw)
 	 * ok
 	 */
 	result =
-	    usb_get_status(hw->usb, USB_RECIP_ENDPOINT, hw->endp_in, &status);
+	    usb_get_std_status(hw->usb, USB_RECIP_ENDPOINT, hw->endp_in, &status);
 	if (result < 0) {
 		netdev_err(hw->wlandev->netdev, "Cannot get bulk in endpoint status.\n");
 		goto done;
@@ -2466,7 +2466,7 @@ int hfa384x_drvr_start(struct hfa384x *hw)
 		netdev_err(hw->wlandev->netdev, "Failed to reset bulk in endpoint.\n");
 
 	result =
-	    usb_get_status(hw->usb, USB_RECIP_ENDPOINT, hw->endp_out, &status);
+	    usb_get_std_status(hw->usb, USB_RECIP_ENDPOINT, hw->endp_out, &status);
 	if (result < 0) {
 		netdev_err(hw->wlandev->netdev, "Cannot get bulk out endpoint status.\n");
 		goto done;
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 939a63bca82f..f699abab1787 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -77,11 +77,12 @@ config USB_PCI
 	depends on PCI
 	default y
 	---help---
-	  A lot of embeded system SOC (e.g. freescale T2080) have both
-	  PCI and USB modules. But USB module is controlled by registers
-	  directly, it have no relationship with PCI module.
+	  Many embedded system SOCs (e.g. freescale T2080) have both
+	  PCI and USB modules with the USB module directly controlled by
+	  registers and having no relationship to the PCI module.
 
-	  When say N here it will not build PCI related code in USB driver.
+	  If you have such a device you may say N here and PCI related code
+	  will not be built in the USB driver.
 
 if USB
 
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 5160a4a966b3..6470d259b7d8 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /******************************************************************************
  *  cxacru.c  -  driver for USB ADSL modems based on
  *               Conexant AccessRunner chipset
@@ -6,21 +7,6 @@
  *  Copyright (C) 2005 Duncan Sands, Roman Kagan (rkagan % mail ! ru)
  *  Copyright (C) 2007 Simon Arlott
  *  Copyright (C) 2009 Simon Arlott
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the Free
- *  Software Foundation; either version 2 of the License, or (at your option)
- *  any later version.
- *
- *  This program is distributed in the hope that it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- *  more details.
- *
- *  You should have received a copy of the GNU General Public License along with
- *  this program; if not, write to the Free Software Foundation, Inc., 59
- *  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
  ******************************************************************************/
 
 /*
@@ -424,6 +410,7 @@ static ssize_t cxacru_sysfs_store_adsl_state(struct device *dev,
 		case CXPOLL_STOPPING:
 			/* abort stop request */
 			instance->poll_state = CXPOLL_POLLING;
+			/* fall through */
 		case CXPOLL_POLLING:
 		case CXPOLL_SHUTDOWN:
 			/* don't start polling */
@@ -570,10 +557,8 @@ static int cxacru_start_wait_urb(struct urb *urb, struct completion *done,
 {
 	struct timer_list timer;
 
-	init_timer(&timer);
+	setup_timer(&timer, cxacru_timeout_kill, (unsigned long)urb);
 	timer.expires = jiffies + msecs_to_jiffies(CMD_TIMEOUT);
-	timer.data = (unsigned long) urb;
-	timer.function = cxacru_timeout_kill;
 	add_timer(&timer);
 	wait_for_completion(done);
 	del_timer_sync(&timer);
@@ -797,6 +782,7 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
 	case CXPOLL_STOPPING:
 		/* abort stop request */
 		instance->poll_state = CXPOLL_POLLING;
+		/* fall through */
 	case CXPOLL_POLLING:
 	case CXPOLL_SHUTDOWN:
 		/* don't start polling */
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 3676adb40d89..5a5e8c0aaa39 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /******************************************************************************
  *  speedtch.c  -  Alcatel SpeedTouch USB xDSL modem driver
  *
@@ -6,21 +7,6 @@
  *  Copyright (C) 2004, David Woodhouse
  *
  *  Based on "modem_run.c", copyright (C) 2001, Benoit Papillault
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the Free
- *  Software Foundation; either version 2 of the License, or (at your option)
- *  any later version.
- *
- *  This program is distributed in the hope that it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- *  more details.
- *
- *  You should have received a copy of the GNU General Public License along with
- *  this program; if not, write to the Free Software Foundation, Inc., 59
- *  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
  ******************************************************************************/
 
 #include <asm/page.h>
@@ -874,16 +860,13 @@ static int speedtch_bind(struct usbatm_data *usbatm,
 	usbatm->flags |= (use_isoc ? UDSL_USE_ISOC : 0);
 
 	INIT_WORK(&instance->status_check_work, speedtch_check_status);
-	init_timer(&instance->status_check_timer);
-
-	instance->status_check_timer.function = speedtch_status_poll;
-	instance->status_check_timer.data = (unsigned long)instance;
+	setup_timer(&instance->status_check_timer, speedtch_status_poll,
+		    (unsigned long)instance);
 	instance->last_status = 0xff;
 	instance->poll_delay = MIN_POLL_DELAY;
 
-	init_timer(&instance->resubmit_timer);
-	instance->resubmit_timer.function = speedtch_resubmit_int;
-	instance->resubmit_timer.data = (unsigned long)instance;
+	setup_timer(&instance->resubmit_timer, speedtch_resubmit_int,
+		    (unsigned long)instance);
 
 	instance->int_urb = usb_alloc_urb(0, GFP_KERNEL);
 
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index ba7616395db2..ab75690044bb 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*-
  * Copyright (c) 2003, 2004
  *	Damien Bergamini <damien.bergamini@free.fr>. All rights reserved.
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index 8607af758bbd..044264aa1f96 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -1,24 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /******************************************************************************
  *  usbatm.c - Generic USB xDSL driver core
  *
  *  Copyright (C) 2001, Alcatel
  *  Copyright (C) 2003, Duncan Sands, SolNegro, Josep Comas
  *  Copyright (C) 2004, David Woodhouse, Roman Kagan
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the Free
- *  Software Foundation; either version 2 of the License, or (at your option)
- *  any later version.
- *
- *  This program is distributed in the hope that it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- *  more details.
- *
- *  You should have received a copy of the GNU General Public License along with
- *  this program; if not, write to the Free Software Foundation, Inc., 59
- *  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
  ******************************************************************************/
 
 /*
diff --git a/drivers/usb/atm/usbatm.h b/drivers/usb/atm/usbatm.h
index f3eecd967a8a..d3bdc4cc47aa 100644
--- a/drivers/usb/atm/usbatm.h
+++ b/drivers/usb/atm/usbatm.h
@@ -1,24 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /******************************************************************************
  *  usbatm.h - Generic USB xDSL driver core
  *
  *  Copyright (C) 2001, Alcatel
  *  Copyright (C) 2003, Duncan Sands, SolNegro, Josep Comas
  *  Copyright (C) 2004, David Woodhouse
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the Free
- *  Software Foundation; either version 2 of the License, or (at your option)
- *  any later version.
- *
- *  This program is distributed in the hope that it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- *  more details.
- *
- *  You should have received a copy of the GNU General Public License along with
- *  this program; if not, write to the Free Software Foundation, Inc., 59
- *  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
  ******************************************************************************/
 
 #ifndef	_USBATM_H_
diff --git a/drivers/usb/atm/xusbatm.c b/drivers/usb/atm/xusbatm.c
index c73c1ec3005e..ffc9810070a3 100644
--- a/drivers/usb/atm/xusbatm.c
+++ b/drivers/usb/atm/xusbatm.c
@@ -1,22 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /******************************************************************************
  *  xusbatm.c -	dumb usbatm-based driver for modems initialized in userspace
  *
  *  Copyright (C) 2005 Duncan Sands, Roman Kagan (rkagan % mail ! ru)
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the Free
- *  Software Foundation; either version 2 of the License, or (at your option)
- *  any later version.
- *
- *  This program is distributed in the hope that it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- *  more details.
- *
- *  You should have received a copy of the GNU General Public License along with
- *  this program; if not, write to the Free Software Foundation, Inc., 59
- *  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
  ******************************************************************************/
 
 #include <linux/module.h>
diff --git a/drivers/usb/c67x00/Makefile b/drivers/usb/c67x00/Makefile
index da5f314a5de0..0cde62d06e5d 100644
--- a/drivers/usb/c67x00/Makefile
+++ b/drivers/usb/c67x00/Makefile
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # Makefile for Cypress C67X00 USB Controller
 #
diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c
index 5796c8820514..53838e7d4eef 100644
--- a/drivers/usb/c67x00/c67x00-drv.c
+++ b/drivers/usb/c67x00/c67x00-drv.c
@@ -1,24 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * c67x00-drv.c: Cypress C67X00 USB Common infrastructure
  *
  * Copyright (C) 2006-2008 Barco N.V.
  *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
  *    based on multiple host controller drivers inside the linux kernel.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301  USA.
  */
 
 /*
diff --git a/drivers/usb/c67x00/c67x00-hcd.c b/drivers/usb/c67x00/c67x00-hcd.c
index 30d3f346686e..c39eee17c0e4 100644
--- a/drivers/usb/c67x00/c67x00-hcd.c
+++ b/drivers/usb/c67x00/c67x00-hcd.c
@@ -1,24 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * c67x00-hcd.c: Cypress C67X00 USB Host Controller Driver
  *
  * Copyright (C) 2006-2008 Barco N.V.
  *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
  *    based on multiple host controller drivers inside the linux kernel.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301  USA.
  */
 
 #include <linux/device.h>
diff --git a/drivers/usb/c67x00/c67x00-hcd.h b/drivers/usb/c67x00/c67x00-hcd.h
index cf8a455a6403..3b181d4c7a03 100644
--- a/drivers/usb/c67x00/c67x00-hcd.h
+++ b/drivers/usb/c67x00/c67x00-hcd.h
@@ -1,24 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * c67x00-hcd.h: Cypress C67X00 USB HCD
  *
  * Copyright (C) 2006-2008 Barco N.V.
  *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
  *    based on multiple host controller drivers inside the linux kernel.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301  USA.
  */
 
 #ifndef _USB_C67X00_HCD_H
diff --git a/drivers/usb/c67x00/c67x00-ll-hpi.c b/drivers/usb/c67x00/c67x00-ll-hpi.c
index b58151841e10..e1fe3603140a 100644
--- a/drivers/usb/c67x00/c67x00-ll-hpi.c
+++ b/drivers/usb/c67x00/c67x00-ll-hpi.c
@@ -1,24 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * c67x00-ll-hpi.c: Cypress C67X00 USB Low level interface using HPI
  *
  * Copyright (C) 2006-2008 Barco N.V.
  *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
  *    based on multiple host controller drivers inside the linux kernel.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301  USA.
  */
 
 #include <asm/byteorder.h>
diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c
index 7311ed61e99a..633c52de3bb3 100644
--- a/drivers/usb/c67x00/c67x00-sched.c
+++ b/drivers/usb/c67x00/c67x00-sched.c
@@ -1,24 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * c67x00-sched.c: Cypress C67X00 USB Host Controller Driver - TD scheduling
  *
  * Copyright (C) 2006-2008 Barco N.V.
  *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
  *    based on multiple host controller drivers inside the linux kernel.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301  USA.
  */
 
 #include <linux/kthread.h>
@@ -966,13 +952,11 @@ static void c67x00_handle_successful_td(struct c67x00_hcd *c67x00,
 static void c67x00_handle_isoc(struct c67x00_hcd *c67x00, struct c67x00_td *td)
 {
 	struct urb *urb = td->urb;
-	struct c67x00_urb_priv *urbp;
 	int cnt;
 
 	if (!urb)
 		return;
 
-	urbp = urb->hcpriv;
 	cnt = td->privdata;
 
 	if (td->status & TD_ERROR_MASK)
diff --git a/drivers/usb/c67x00/c67x00.h b/drivers/usb/c67x00/c67x00.h
index a26e9ded0f32..7ce10928b037 100644
--- a/drivers/usb/c67x00/c67x00.h
+++ b/drivers/usb/c67x00/c67x00.h
@@ -1,24 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * c67x00.h: Cypress C67X00 USB register and field definitions
  *
  * Copyright (C) 2006-2008 Barco N.V.
  *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
  *    based on multiple host controller drivers inside the linux kernel.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301  USA.
  */
 
 #ifndef _USB_C67X00_H
diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index 51f4157bbecf..785f0ed037f7 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -9,7 +9,7 @@ config USB_CHIPIDEA
 	  Dual-role switch (ID, OTG FSM, sysfs), Host-only, and
 	  Peripheral-only.
 
-	  When compiled dynamically, the module will be called ci-hdrc.ko.
+	  When compiled dynamically, the module will be called ci_hdrc.ko.
 
 if USB_CHIPIDEA
 
diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
index e462f55c8b99..98da99510be7 100644
--- a/drivers/usb/chipidea/bits.h
+++ b/drivers/usb/chipidea/bits.h
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * bits.h - register bits of the ChipIdea USB IP core
  *
  * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
  *
  * Author: David Lopo
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef __DRIVERS_USB_CHIPIDEA_BITS_H
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 6743f85b1b7a..98b7cb3d0064 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * ci.h - common structures, functions, and macros of the ChipIdea driver
  *
  * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
  *
  * Author: David Lopo
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef __DRIVERS_USB_CHIPIDEA_CI_H
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 5f4a8157fad8..3b45c25f296e 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -1,14 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright (C) 2012 Marek Vasut <marex@denx.de>
  * on behalf of DENX Software Engineering GmbH
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h
index d666c9f036ba..204275f47573 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.h
+++ b/drivers/usb/chipidea/ci_hdrc_imx.h
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #ifndef __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H
diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index bb626120296f..3593ce0ec641 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -1,9 +1,5 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. */
 
 #include <linux/module.h>
 #include <linux/platform_device.h>
diff --git a/drivers/usb/chipidea/ci_hdrc_pci.c b/drivers/usb/chipidea/ci_hdrc_pci.c
index 39414e4b2d81..49a61549cee6 100644
--- a/drivers/usb/chipidea/ci_hdrc_pci.c
+++ b/drivers/usb/chipidea/ci_hdrc_pci.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * ci_hdrc_pci.c - MIPS USB IP core family device controller
  *
  * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
  *
  * Author: David Lopo
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/platform_device.h>
diff --git a/drivers/usb/chipidea/ci_hdrc_tegra.c b/drivers/usb/chipidea/ci_hdrc_tegra.c
index bfcee2702d50..7b65a1040d2c 100644
--- a/drivers/usb/chipidea/ci_hdrc_tegra.c
+++ b/drivers/usb/chipidea/ci_hdrc_tegra.c
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2016, NVIDIA Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
  */
 
 #include <linux/clk.h>
diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c
index 99425db9ba62..c044fba463e4 100644
--- a/drivers/usb/chipidea/ci_hdrc_usb2.c
+++ b/drivers/usb/chipidea/ci_hdrc_usb2.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2014 Marvell Technology Group Ltd.
  *
  * Antoine Tenart <antoine.tenart@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/clk.h>
diff --git a/drivers/usb/chipidea/ci_hdrc_zevio.c b/drivers/usb/chipidea/ci_hdrc_zevio.c
index 1264de505527..e1634da4a4b1 100644
--- a/drivers/usb/chipidea/ci_hdrc_zevio.c
+++ b/drivers/usb/chipidea/ci_hdrc_zevio.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *	Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
  * Based off drivers/usb/chipidea/ci_hdrc_msm.c
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 43ea5fb87b9a..dd2dd9391bb7 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * core.c - ChipIdea USB IP core family device controller
  *
  * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
  *
  * Author: David Lopo
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 /*
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 18cb8e46262d..19d60ed7e41f 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -1,22 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * host.c - ChipIdea USB host controller driver
  *
  * Copyright (c) 2012 Intel Corporation
  *
  * Author: Alexander Shishkin
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
index 10236fe71522..db4ceffcf2a6 100644
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * otg.c - ChipIdea USB IP core OTG driver
  *
  * Copyright (C) 2013 Freescale Semiconductor, Inc.
  *
  * Author: Peter Chen
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 /*
diff --git a/drivers/usb/chipidea/otg.h b/drivers/usb/chipidea/otg.h
index 9ecb598e48f0..7e7428e48bfa 100644
--- a/drivers/usb/chipidea/otg.h
+++ b/drivers/usb/chipidea/otg.h
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2013-2014 Freescale Semiconductor, Inc.
  *
  * Author: Peter Chen
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef __DRIVERS_USB_CHIPIDEA_OTG_H
diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c
index 5ea0246f650d..9e2d300060bc 100644
--- a/drivers/usb/chipidea/otg_fsm.c
+++ b/drivers/usb/chipidea/otg_fsm.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * otg_fsm.c - ChipIdea USB IP core OTG FSM driver
  *
  * Copyright (C) 2014 Freescale Semiconductor, Inc.
  *
  * Author: Jun Li
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 /*
diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h
index 6366fe398ba6..2b49d29bf2fb 100644
--- a/drivers/usb/chipidea/otg_fsm.h
+++ b/drivers/usb/chipidea/otg_fsm.h
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2014 Freescale Semiconductor, Inc.
  *
  * Author: Jun Li
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef __DRIVERS_USB_CHIPIDEA_OTG_FSM_H
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index fe8a90543ea3..9852ec5e6e01 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * udc.c - ChipIdea UDC driver
  *
  * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
  *
  * Author: David Lopo
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/delay.h>
@@ -1526,6 +1523,10 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 		gadget_ready = 1;
 	spin_unlock_irqrestore(&ci->lock, flags);
 
+	if (ci->usb_phy)
+		usb_phy_set_charger_state(ci->usb_phy, is_active ?
+			USB_CHARGER_PRESENT : USB_CHARGER_ABSENT);
+
 	if (gadget_ready) {
 		if (is_active) {
 			pm_runtime_get_sync(&_gadget->dev);
diff --git a/drivers/usb/chipidea/udc.h b/drivers/usb/chipidea/udc.h
index 2ecd1174d66c..e023735d94b7 100644
--- a/drivers/usb/chipidea/udc.h
+++ b/drivers/usb/chipidea/udc.h
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * udc.h - ChipIdea UDC structures
  *
  * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
  *
  * Author: David Lopo
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef __DRIVERS_USB_CHIPIDEA_UDC_H
diff --git a/drivers/usb/chipidea/ulpi.c b/drivers/usb/chipidea/ulpi.c
index 1219583dc1b2..6da42dcd2888 100644
--- a/drivers/usb/chipidea/ulpi.c
+++ b/drivers/usb/chipidea/ulpi.c
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2016 Linaro Ltd.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/device.h>
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 9f4a0185dd60..8cdf0af156c6 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/class/Makefile b/drivers/usb/class/Makefile
index 32e85277b5cf..5d393a28f7f2 100644
--- a/drivers/usb/class/Makefile
+++ b/drivers/usb/class/Makefile
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # Makefile for USB Class drivers
 # (one step up from the misc category)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 18c923a4c16e..8e0636c963a7 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * cdc-acm.c
  *
@@ -12,20 +13,6 @@
  * USB Abstract Control Model driver for USB modems and ISDN adapters
  *
  * Sponsored by SuSE
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
 
 #undef DEBUG
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index fbaa2a90d25d..6c181a625daf 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * cdc-wdm.c
  *
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index fb87c17ed6fa..c454885ef4a0 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * usblp.c
  *
@@ -31,22 +32,6 @@
  *      none  - Maintained in Linux kernel after v0.13
  */
 
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched/signal.h>
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 6ebfabfa0dc7..0b8b0f3bdd2f 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -1,22 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /**
  * drivers/usb/class/usbtmc.c - USB Test & Measurement class driver
  *
  * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany
  * Copyright (C) 2008 Novell, Inc.
  * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * The GNU General Public License is available at
- * http://www.gnu.org/copyleft/gpl.html.
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -1343,6 +1331,7 @@ static void usbtmc_interrupt(struct urb *urb)
 	case -EOVERFLOW:
 		dev_err(dev, "overflow with length %d, actual length is %d\n",
 			data->iin_wMaxPacketSize, urb->actual_length);
+		/* fall through */
 	case -ECONNRESET:
 	case -ENOENT:
 	case -ESHUTDOWN:
diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c
index 552ff7ac5a6b..50a2362ed3ea 100644
--- a/drivers/usb/common/common.c
+++ b/drivers/usb/common/common.c
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Provides code common for host and device side USB.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation, version 2.
- *
  * If either host side (ie. CONFIG_USB=y) or device side USB stack
  * (ie. CONFIG_USB_GADGET=y) is compiled in the kernel, this module is
  * compiled-in as well.  Otherwise, if either of the two stacks is
diff --git a/drivers/usb/common/led.c b/drivers/usb/common/led.c
index df23da00a901..7bd81166b77d 100644
--- a/drivers/usb/common/led.c
+++ b/drivers/usb/common/led.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * LED Triggers for USB Activity
  *
  * Copyright 2014 Michal Sojka <sojka@merica.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c
index 4aa5195db8ea..8b351444cc40 100644
--- a/drivers/usb/common/ulpi.c
+++ b/drivers/usb/common/ulpi.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * ulpi.c - USB ULPI PHY bus
  *
  * Copyright (C) 2015 Intel Corporation
  *
  * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/ulpi/interface.h>
diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c
index b8fe31e409a5..3740cf95560e 100644
--- a/drivers/usb/common/usb-otg-fsm.c
+++ b/drivers/usb/common/usb-otg-fsm.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * OTG Finite State Machine from OTG spec
  *
@@ -5,20 +6,6 @@
  *
  * Author:	Li Yang <LeoLi@freescale.com>
  *		Jerry Huang <Chang-Ming.Huang@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c
index b64568cf572c..77eef8acff94 100644
--- a/drivers/usb/core/buffer.c
+++ b/drivers/usb/core/buffer.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * DMA memory management for framework level HCD code (hc_driver)
  *
@@ -5,7 +6,6 @@
  * and should work with all USB controllers, regardless of bus type.
  *
  * Released under the GPLv2 only.
- * SPDX-License-Identifier: GPL-2.0
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 883549ee946c..da8acd980fc6 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -1,6 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Released under the GPLv2 only.
- * SPDX-License-Identifier: GPL-2.0
  */
 
 #include <linux/usb.h>
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 55dea2e7828f..c2cf62b7043a 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * devices.c
  * (C) Copyright 1999 Randy Dunlap.
@@ -5,20 +6,6 @@
  *     (proc file per device)
  * (C) Copyright 1999 Deti Fliegl (new USB architecture)
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  *************************************************************
  *
  * <mountpoint>/devices contains USB topology, device, config, class,
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 4ae667d8c238..705c573d0257 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*****************************************************************************/
 
 /*
@@ -5,20 +6,6 @@
  *
  *      Copyright (C) 1999-2000  Thomas Sailer (sailer@ife.ee.ethz.ch)
  *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be useful,
- *      but WITHOUT ANY WARRANTY; without even the implied warranty of
- *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *      GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public License
- *      along with this program; if not, write to the Free Software
- *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
  *  This file implements the usbfs/x/y files, where
  *  x is the bus number and y the device number.
  *
@@ -1833,6 +1820,18 @@ static int proc_unlinkurb(struct usb_dev_state *ps, void __user *arg)
 	return 0;
 }
 
+static void compute_isochronous_actual_length(struct urb *urb)
+{
+	unsigned int i;
+
+	if (urb->number_of_packets > 0) {
+		urb->actual_length = 0;
+		for (i = 0; i < urb->number_of_packets; i++)
+			urb->actual_length +=
+					urb->iso_frame_desc[i].actual_length;
+	}
+}
+
 static int processcompl(struct async *as, void __user * __user *arg)
 {
 	struct urb *urb = as->urb;
@@ -1840,6 +1839,7 @@ static int processcompl(struct async *as, void __user * __user *arg)
 	void __user *addr = as->userurb;
 	unsigned int i;
 
+	compute_isochronous_actual_length(urb);
 	if (as->userbuffer && urb->actual_length) {
 		if (copy_urb_data_to_user(as->userbuffer, urb))
 			goto err_out;
@@ -2008,6 +2008,7 @@ static int processcompl_compat(struct async *as, void __user * __user *arg)
 	void __user *addr = as->userurb;
 	unsigned int i;
 
+	compute_isochronous_actual_length(urb);
 	if (as->userbuffer && urb->actual_length) {
 		if (copy_urb_data_to_user(as->userbuffer, urb))
 			return -EFAULT;
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index eb87a259d55c..64262a9a8829 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * drivers/usb/driver.c - most of the driver model stuff for usb
  *
@@ -16,7 +17,6 @@
  *	(C) Copyright Greg Kroah-Hartman 2002-2003
  *
  * Released under the GPLv2 only.
- * SPDX-License-Identifier: GPL-2.0
  *
  * NOTE! This is not actually a driver at all, rather this is
  * just a collection of helper routines that implement the
@@ -1340,8 +1340,8 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 			int err;
 			u16 devstat;
 
-			err = usb_get_status(udev, USB_RECIP_DEVICE, 0,
-					     &devstat);
+			err = usb_get_std_status(udev, USB_RECIP_DEVICE, 0,
+						 &devstat);
 			if (err) {
 				dev_err(&udev->dev,
 					"Failed to suspend device, error %d\n",
@@ -1461,6 +1461,7 @@ static void choose_wakeup(struct usb_device *udev, pm_message_t msg)
 int usb_suspend(struct device *dev, pm_message_t msg)
 {
 	struct usb_device	*udev = to_usb_device(dev);
+	int r;
 
 	unbind_no_pm_drivers_interfaces(udev);
 
@@ -1469,7 +1470,14 @@ int usb_suspend(struct device *dev, pm_message_t msg)
 	 * so we may still need to unbind and rebind upon resume
 	 */
 	choose_wakeup(udev, msg);
-	return usb_suspend_both(udev, msg);
+	r = usb_suspend_both(udev, msg);
+	if (r)
+		return r;
+
+	if (udev->quirks & USB_QUIRK_DISCONNECT_SUSPEND)
+		usb_port_disable(udev);
+
+	return 0;
 }
 
 /* The device lock is held by the PM core */
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index a60bc830a056..1c2c04079676 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * drivers/usb/core/endpoint.c
  *
@@ -6,7 +7,6 @@
  * (C) Copyright 2006 Novell Inc.
  *
  * Released under the GPLv2 only.
- * SPDX-License-Identifier: GPL-2.0
  *
  * Endpoint sysfs stuff
  */
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index 87ad6b6bfee8..65de6f73b672 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * drivers/usb/core/file.c
  *
@@ -14,7 +15,6 @@
  * (C) Copyright Greg Kroah-Hartman 2002-2003
  *
  * Released under the GPLv2 only.
- * SPDX-License-Identifier: GPL-2.0
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index bd3e0c5a6db2..83c14dda6300 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * drivers/usb/generic.c - generic driver for USB devices (not interfaces)
  *
@@ -16,7 +17,6 @@
  *	(C) Copyright Greg Kroah-Hartman 2002-2003
  *
  * Released under the GPLv2 only.
- * SPDX-License-Identifier: GPL-2.0
  */
 
 #include <linux/usb.h>
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index ea829ad798c0..66fe1b78d952 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * (C) Copyright David Brownell 2000-2002
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 75ad6718858c..19b5c4afeef2 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * (C) Copyright Linus Torvalds 1999
  * (C) Copyright Johannes Erdfelt 1999-2001
@@ -6,20 +7,6 @@
  * (C) Copyright Deti Fliegl 1999
  * (C) Copyright Randy Dunlap 2000
  * (C) Copyright David Brownell 2000-2002
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/bcd.h>
@@ -2558,9 +2545,7 @@ struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver,
 	hcd->self.bus_name = bus_name;
 	hcd->self.uses_dma = (sysdev->dma_mask != NULL);
 
-	init_timer(&hcd->rh_timer);
-	hcd->rh_timer.function = rh_timer_func;
-	hcd->rh_timer.data = (unsigned long) hcd;
+	setup_timer(&hcd->rh_timer, rh_timer_func, (unsigned long)hcd);
 #ifdef CONFIG_PM
 	INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
 #endif
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index e9ce6bb0b22d..7ccdd3d4db84 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB hub driver.
  *
@@ -7,7 +8,6 @@
  * (C) Copyright 2001 Brad Hards (bhards@bigpond.net.au)
  *
  * Released under the GPLv2 only.
- * SPDX-License-Identifier: GPL-2.0
  */
 
 #include <linux/kernel.h>
@@ -1482,7 +1482,7 @@ static int hub_configure(struct usb_hub *hub,
 	/* power budgeting mostly matters with bus-powered hubs,
 	 * and battery-powered root hubs (may provide just 8 mA).
 	 */
-	ret = usb_get_status(hdev, USB_RECIP_DEVICE, 0, &hubstatus);
+	ret = usb_get_std_status(hdev, USB_RECIP_DEVICE, 0, &hubstatus);
 	if (ret) {
 		message = "can't get hub status";
 		goto fail;
@@ -3279,7 +3279,7 @@ static int finish_port_resume(struct usb_device *udev)
 	 */
 	if (status == 0) {
 		devstatus = 0;
-		status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
+		status = usb_get_std_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
 
 		/* If a normal resume failed, try doing a reset-resume */
 		if (status && !udev->reset_resume && udev->persist_enabled) {
@@ -3303,7 +3303,7 @@ static int finish_port_resume(struct usb_device *udev)
 			if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP))
 				status = usb_disable_remote_wakeup(udev);
 		} else {
-			status = usb_get_status(udev, USB_RECIP_INTERFACE, 0,
+			status = usb_get_std_status(udev, USB_RECIP_INTERFACE, 0,
 					&devstatus);
 			if (!status && devstatus & (USB_INTRF_STAT_FUNC_RW_CAP
 					| USB_INTRF_STAT_FUNC_RW))
@@ -4183,6 +4183,19 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
 	return ret;
 }
 
+/*
+ * usb_port_disable - disable a usb device's upstream port
+ * @udev: device to disable
+ * Context: @udev locked, must be able to sleep.
+ *
+ * Disables a USB device that isn't in active use.
+ */
+int usb_port_disable(struct usb_device *udev)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
+
+	return hub_port_disable(hub, udev->portnum, 0);
+}
 
 /* USB 2.0 spec, 7.1.7.3 / fig 7-29:
  *
@@ -4853,7 +4866,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 				&& udev->bus_mA <= unit_load) {
 			u16	devstat;
 
-			status = usb_get_status(udev, USB_RECIP_DEVICE, 0,
+			status = usb_get_std_status(udev, USB_RECIP_DEVICE, 0,
 					&devstat);
 			if (status) {
 				dev_dbg(&udev->dev, "get status %d ?\n", status);
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 34c1a7e22aae..2a700ccc868c 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * usb hub driver head file
  *
@@ -8,15 +9,6 @@
  * Copyright (C) 2012 Intel Corp (tianyu.lan@intel.com)
  *
  *  move struct usb_hub to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
  */
 
 #include <linux/usb.h>
diff --git a/drivers/usb/core/ledtrig-usbport.c b/drivers/usb/core/ledtrig-usbport.c
index 1af877942110..9dbb429cd471 100644
--- a/drivers/usb/core/ledtrig-usbport.c
+++ b/drivers/usb/core/ledtrig-usbport.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB port LED trigger
  *
  * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/device.h>
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 371a07d874a3..77001bcfc504 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1,8 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * message.c - synchronous message handling
  *
  * Released under the GPLv2 only.
- * SPDX-License-Identifier: GPL-2.0
  */
 
 #include <linux/pci.h>	/* for scatterlist macros */
@@ -918,7 +918,8 @@ int usb_get_device_descriptor(struct usb_device *dev, unsigned int size)
 /**
  * usb_get_status - issues a GET_STATUS call
  * @dev: the device whose status is being checked
- * @type: USB_RECIP_*; for device, interface, or endpoint
+ * @recip: USB_RECIP_*; for device, interface, or endpoint
+ * @type: USB_STATUS_TYPE_*; for standard or PTM status types
  * @target: zero (for device), else interface or endpoint number
  * @data: pointer to two bytes of bitmap data
  * Context: !in_interrupt ()
@@ -937,24 +938,58 @@ int usb_get_device_descriptor(struct usb_device *dev, unsigned int size)
  * Returns 0 and the status value in *@data (in host byte order) on success,
  * or else the status code from the underlying usb_control_msg() call.
  */
-int usb_get_status(struct usb_device *dev, int type, int target, void *data)
+int usb_get_status(struct usb_device *dev, int recip, int type, int target,
+		void *data)
 {
 	int ret;
-	__le16 *status = kmalloc(sizeof(*status), GFP_KERNEL);
+	void *status;
+	int length;
+
+	switch (type) {
+	case USB_STATUS_TYPE_STANDARD:
+		length = 2;
+		break;
+	case USB_STATUS_TYPE_PTM:
+		if (recip != USB_RECIP_DEVICE)
+			return -EINVAL;
 
+		length = 4;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	status =  kmalloc(length, GFP_KERNEL);
 	if (!status)
 		return -ENOMEM;
 
 	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
-		USB_REQ_GET_STATUS, USB_DIR_IN | type, 0, target, status,
-		sizeof(*status), USB_CTRL_GET_TIMEOUT);
+		USB_REQ_GET_STATUS, USB_DIR_IN | recip, USB_STATUS_TYPE_STANDARD,
+		target, status, length, USB_CTRL_GET_TIMEOUT);
 
-	if (ret == 2) {
-		*(u16 *) data = le16_to_cpu(*status);
+	switch (ret) {
+	case 4:
+		if (type != USB_STATUS_TYPE_PTM) {
+			ret = -EIO;
+			break;
+		}
+
+		*(u32 *) data = le32_to_cpu(*(__le32 *) status);
+		ret = 0;
+		break;
+	case 2:
+		if (type != USB_STATUS_TYPE_STANDARD) {
+			ret = -EIO;
+			break;
+		}
+
+		*(u16 *) data = le16_to_cpu(*(__le16 *) status);
 		ret = 0;
-	} else if (ret >= 0) {
+		break;
+	default:
 		ret = -EIO;
 	}
+
 	kfree(status);
 	return ret;
 }
diff --git a/drivers/usb/core/notify.c b/drivers/usb/core/notify.c
index b12a463a3e22..ab474b11523e 100644
--- a/drivers/usb/core/notify.c
+++ b/drivers/usb/core/notify.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * All the USB notify logic
  *
@@ -7,7 +8,6 @@
  * but fixed up to not be so broken.
  *
  * Released under the GPLv2 only.
- * SPDX-License-Identifier: GPL-2.0
  */
 
 
diff --git a/drivers/usb/core/of.c b/drivers/usb/core/of.c
index 3863bb1ce8c5..2be968353257 100644
--- a/drivers/usb/core/of.c
+++ b/drivers/usb/core/of.c
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * of.c		The helpers for hcd device tree support
  *
  * Copyright (C) 2016 Freescale Semiconductor, Inc.
  * Author: Peter Chen <peter.chen@freescale.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 #include <linux/of.h>
diff --git a/drivers/usb/core/otg_whitelist.h b/drivers/usb/core/otg_whitelist.h
index 085049d37d7a..2ae90158ded7 100644
--- a/drivers/usb/core/otg_whitelist.h
+++ b/drivers/usb/core/otg_whitelist.h
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * drivers/usb/core/otg_whitelist.h
  *
  * Copyright (C) 2004 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 /*
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index 460c855be0d0..1a01e9ad3804 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * usb port device code
  *
  * Copyright (C) 2012 Intel Corp
  *
  * Author: Lan Tianyu <tianyu.lan@intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
  */
 
 #include <linux/slab.h>
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index a6aaf2f193a4..f1dbab6f798f 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -1,14 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB device quirk handling logic and table
  *
  * Copyright (c) 2007 Oliver Neukum
  * Copyright (c) 2007 Greg Kroah-Hartman <gregkh@suse.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation, version 2.
- *
- *
  */
 
 #include <linux/usb.h>
@@ -203,6 +198,12 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
 			USB_QUIRK_STRING_FETCH_255 },
 
+	/* Huawei 4G LTE module */
+	{ USB_DEVICE(0x12d1, 0x15bb), .driver_info =
+			USB_QUIRK_DISCONNECT_SUSPEND },
+	{ USB_DEVICE(0x12d1, 0x15c3), .driver_info =
+			USB_QUIRK_DISCONNECT_SUSPEND },
+
 	/* SKYMEDI USB_DRIVE */
 	{ USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },
 
@@ -221,6 +222,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Corsair Strafe RGB */
 	{ USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT },
 
+	/* Corsair K70 LUX */
+	{ USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT },
+
 	/* MIDI keyboard WORLDE MINI */
 	{ USB_DEVICE(0x1c75, 0x0204), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 58d59c5f8592..27bb34043053 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * drivers/usb/core/sysfs.c
  *
@@ -8,7 +9,6 @@
  * All of the sysfs file attributes for usb devices and interfaces.
  *
  * Released under the GPLv2 only.
- * SPDX-License-Identifier: GPL-2.0
  */
 
 
@@ -654,7 +654,8 @@ static int add_power_attributes(struct device *dev)
 		if (udev->usb2_hw_lpm_capable == 1)
 			rc = sysfs_merge_group(&dev->kobj,
 					&usb2_hardware_lpm_attr_group);
-		if (udev->speed == USB_SPEED_SUPER &&
+		if ((udev->speed == USB_SPEED_SUPER ||
+		     udev->speed == USB_SPEED_SUPER_PLUS) &&
 				udev->lpm_capable == 1)
 			rc = sysfs_merge_group(&dev->kobj,
 					&usb3_hardware_lpm_attr_group);
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 47903d510955..f501af0b3079 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -1,6 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Released under the GPLv2 only.
- * SPDX-License-Identifier: GPL-2.0
  */
 
 #include <linux/module.h>
@@ -492,6 +492,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 			if ((urb->interval < 6)
 				&& (xfertype == USB_ENDPOINT_XFER_INT))
 				return -EINVAL;
+			/* fall through */
 		default:
 			if (urb->interval <= 0)
 				return -EINVAL;
diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c
index ef9cf4a21afe..84da17460568 100644
--- a/drivers/usb/core/usb-acpi.c
+++ b/drivers/usb/core/usb-acpi.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB-ACPI glue code
  *
  * Copyright 2012 Red Hat <mjg@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation, version 2.
- *
  */
 #include <linux/module.h>
 #include <linux/usb.h>
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 17681d5638ac..845286f08ab0 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * drivers/usb/core/usb.c
  *
@@ -13,7 +14,6 @@
  * (C) Copyright Greg Kroah-Hartman 2002-2003
  *
  * Released under the GPLv2 only.
- * SPDX-License-Identifier: GPL-2.0
  *
  * NOTE! This is not actually a driver at all, rather this is
  * just a collection of helper routines that implement the
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index dc6949248823..2bee08d084ae 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -1,6 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Released under the GPLv2 only.
- * SPDX-License-Identifier: GPL-2.0
  */
 
 #include <linux/pm.h>
@@ -73,6 +73,7 @@ extern void usb_hub_cleanup(void);
 extern int usb_major_init(void);
 extern void usb_major_cleanup(void);
 extern int usb_device_supports_lpm(struct usb_device *udev);
+extern int usb_port_disable(struct usb_device *udev);
 
 #ifdef	CONFIG_PM
 
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 1b6612c2cdda..82a7d98c3436 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * core.c - DesignWare HS OTG Controller common routines
  *
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 8367d4f985c1..f66c94130cac 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * core.h - DesignWare HS OTG Controller common declarations
  *
@@ -395,6 +396,9 @@ enum dwc2_ep0_state {
  *                           (default when phy_type is UTMI+ or ULPI)
  *                       1 - 6 MHz
  *                           (default when phy_type is Full Speed)
+ * @oc_disable:		Flag to disable overcurrent condition.
+ *			0 - Allow overcurrent condition to get detected
+ *			1 - Disable overcurrent condtion to get detected
  * @ts_dline:           Enable Term Select Dline pulsing
  *                       0 - No (default)
  *                       1 - Yes
@@ -492,6 +496,7 @@ struct dwc2_core_params {
 	bool dma_desc_fs_enable;
 	bool host_support_fs_ls_low_power;
 	bool host_ls_low_power_phy_clk;
+	bool oc_disable;
 
 	u8 host_channels;
 	u16 host_rx_fifo_size;
diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
index b8bcb007c92a..ab3fa1630853 100644
--- a/drivers/usb/dwc2/core_intr.c
+++ b/drivers/usb/dwc2/core_intr.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * core_intr.c - DesignWare HS OTG Controller common interrupt handling
  *
diff --git a/drivers/usb/dwc2/debug.h b/drivers/usb/dwc2/debug.h
index 8222783e6822..6f23219c13cb 100644
--- a/drivers/usb/dwc2/debug.h
+++ b/drivers/usb/dwc2/debug.h
@@ -1,17 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * debug.h - Designware USB2 DRD controller debug header
  *
  * Copyright (C) 2015 Intel Corporation
  * Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include "core.h"
diff --git a/drivers/usb/dwc2/debugfs.c b/drivers/usb/dwc2/debugfs.c
index 794b959a7c8c..f4650a88be78 100644
--- a/drivers/usb/dwc2/debugfs.c
+++ b/drivers/usb/dwc2/debugfs.c
@@ -1,17 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * debugfs.c - Designware USB2 DRD controller debugfs
  *
  * Copyright (C) 2015 Intel Corporation
  * Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/spinlock.h>
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 0d8e09ccb59c..88529d092503 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * Copyright (c) 2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -8,10 +9,6 @@
  *      http://armlinux.simtec.co.uk/
  *
  * S3C USB2.0 High-speed / OtG driver
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/kernel.h>
@@ -3202,6 +3199,8 @@ void dwc2_hsotg_disconnect(struct dwc2_hsotg *hsotg)
 
 	call_gadget(hsotg, disconnect);
 	hsotg->lx_state = DWC2_L3;
+
+	usb_gadget_set_state(&hsotg->gadget, USB_STATE_NOTATTACHED);
 }
 
 /**
@@ -4004,6 +4003,11 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep)
 		return -EINVAL;
 	}
 
+	if (hsotg->op_state != OTG_STATE_B_PERIPHERAL) {
+		dev_err(hsotg->dev, "%s: called in host mode?\n", __func__);
+		return -EINVAL;
+	}
+
 	epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
 
 	spin_lock_irqsave(&hsotg->lock, flags);
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index c2631145f404..69eb40cd1b47 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * hcd.c - DesignWare HS OTG Controller host-mode routines
  *
@@ -213,6 +214,11 @@ static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
 		usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL);
 		if (hsotg->params.phy_ulpi_ddr)
 			usbcfg |= GUSBCFG_DDRSEL;
+
+		/* Set external VBUS indicator as needed. */
+		if (hsotg->params.oc_disable)
+			usbcfg |= (GUSBCFG_ULPI_INT_VBUS_IND |
+				   GUSBCFG_INDICATORPASSTHROUGH);
 		break;
 	case DWC2_PHY_TYPE_PARAM_UTMI:
 		/* UTMI+ interface */
@@ -3277,7 +3283,6 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
 		dwc2_core_init(hsotg, false);
 		dwc2_enable_global_interrupts(hsotg);
 		spin_lock_irqsave(&hsotg->lock, flags);
-		dwc2_hsotg_disconnect(hsotg);
 		dwc2_hsotg_core_init_disconnected(hsotg, false);
 		spin_unlock_irqrestore(&hsotg->lock, flags);
 		dwc2_hsotg_core_connect(hsotg);
@@ -3296,8 +3301,12 @@ host:
 		if (count > 250)
 			dev_err(hsotg->dev,
 				"Connection id status change timed out\n");
-		hsotg->op_state = OTG_STATE_A_HOST;
 
+		spin_lock_irqsave(&hsotg->lock, flags);
+		dwc2_hsotg_disconnect(hsotg);
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+
+		hsotg->op_state = OTG_STATE_A_HOST;
 		/* Initialize the Core for Host mode */
 		dwc2_core_init(hsotg, false);
 		dwc2_enable_global_interrupts(hsotg);
diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h
index 11c3c145b793..78e9e01051b5 100644
--- a/drivers/usb/dwc2/hcd.h
+++ b/drivers/usb/dwc2/hcd.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * hcd.h - DesignWare HS OTG Controller host-mode declarations
  *
diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c
index b8bdf545c3a7..28c8898b3b66 100644
--- a/drivers/usb/dwc2/hcd_ddma.c
+++ b/drivers/usb/dwc2/hcd_ddma.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * hcd_ddma.c - DesignWare HS OTG Controller descriptor DMA routines
  *
diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
index 28a8210710b1..916d991b96b8 100644
--- a/drivers/usb/dwc2/hcd_intr.c
+++ b/drivers/usb/dwc2/hcd_intr.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * hcd_intr.c - DesignWare HS OTG Controller host-mode interrupt handling
  *
diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
index 3ae8b1bbaa55..f472de238ac2 100644
--- a/drivers/usb/dwc2/hcd_queue.c
+++ b/drivers/usb/dwc2/hcd_queue.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * hcd_queue.c - DesignWare HS OTG Controller host queuing routines
  *
diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h
index 4592012c4743..2c906d8ee465 100644
--- a/drivers/usb/dwc2/hw.h
+++ b/drivers/usb/dwc2/hw.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * hw.h - DesignWare HS OTG Controller hardware definitions
  *
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index a3ffe97170ff..ef73af6e03a9 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * Copyright (C) 2004-2016 Synopsys, Inc.
  *
@@ -136,6 +137,15 @@ static void dwc2_set_stm32f4x9_fsotg_params(struct dwc2_hsotg *hsotg)
 	p->activate_stm_fs_transceiver = true;
 }
 
+static void dwc2_set_stm32f7xx_hsotg_params(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_core_params *p = &hsotg->params;
+
+	p->host_rx_fifo_size = 622;
+	p->host_nperio_tx_fifo_size = 128;
+	p->host_perio_tx_fifo_size = 256;
+}
+
 const struct of_device_id dwc2_of_match_table[] = {
 	{ .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params },
 	{ .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params  },
@@ -154,6 +164,8 @@ const struct of_device_id dwc2_of_match_table[] = {
 	{ .compatible = "st,stm32f4x9-fsotg",
 	  .data = dwc2_set_stm32f4x9_fsotg_params },
 	{ .compatible = "st,stm32f4x9-hsotg" },
+	{ .compatible = "st,stm32f7xx-hsotg",
+	  .data = dwc2_set_stm32f7xx_hsotg_params },
 	{},
 };
 MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
@@ -335,6 +347,9 @@ static void dwc2_get_device_properties(struct dwc2_hsotg *hsotg)
 						       num);
 		}
 	}
+
+	if (of_find_property(hsotg->dev->of_node, "disable-over-current", NULL))
+		p->oc_disable = true;
 }
 
 static void dwc2_check_param_otg_cap(struct dwc2_hsotg *hsotg)
diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c
index fdeb8c7bf30a..3ecc951a1aea 100644
--- a/drivers/usb/dwc2/pci.c
+++ b/drivers/usb/dwc2/pci.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * pci.c - DesignWare HS OTG Controller PCI driver
  *
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index daf0d37acb37..3e26550d13dd 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * platform.c - DesignWare HS OTG Controller platform driver
  *
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 03474d3575ab..07832509584f 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * core.c - DesignWare USB3 DRD Controller Core file
  *
@@ -5,18 +6,6 @@
  *
  * Authors: Felipe Balbi <balbi@ti.com>,
  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 #include <linux/version.h>
@@ -156,9 +145,8 @@ static void __dwc3_set_mode(struct work_struct *work)
 		} else {
 			if (dwc->usb2_phy)
 				otg_set_vbus(dwc->usb2_phy->otg, true);
-			if (dwc->usb2_generic_phy)
-				phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
-
+			phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
+			phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
 		}
 		break;
 	case DWC3_GCTL_PRTCAP_DEVICE:
@@ -166,8 +154,8 @@ static void __dwc3_set_mode(struct work_struct *work)
 
 		if (dwc->usb2_phy)
 			otg_set_vbus(dwc->usb2_phy->otg, false);
-		if (dwc->usb2_generic_phy)
-			phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
+		phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
+		phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
 
 		ret = dwc3_gadget_init(dwc);
 		if (ret)
@@ -927,12 +915,13 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
 
 	switch (dwc->dr_mode) {
 	case USB_DR_MODE_PERIPHERAL:
+		dwc->current_dr_role = DWC3_GCTL_PRTCAP_DEVICE;
 		dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
 
 		if (dwc->usb2_phy)
 			otg_set_vbus(dwc->usb2_phy->otg, false);
-		if (dwc->usb2_generic_phy)
-			phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
+		phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
+		phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
 
 		ret = dwc3_gadget_init(dwc);
 		if (ret) {
@@ -942,12 +931,13 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
 		}
 		break;
 	case USB_DR_MODE_HOST:
+		dwc->current_dr_role = DWC3_GCTL_PRTCAP_HOST;
 		dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
 
 		if (dwc->usb2_phy)
 			otg_set_vbus(dwc->usb2_phy->otg, true);
-		if (dwc->usb2_generic_phy)
-			phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
+		phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
+		phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
 
 		ret = dwc3_host_init(dwc);
 		if (ret) {
@@ -1293,21 +1283,19 @@ static int dwc3_suspend_common(struct dwc3 *dwc)
 {
 	unsigned long	flags;
 
-	switch (dwc->dr_mode) {
-	case USB_DR_MODE_PERIPHERAL:
-	case USB_DR_MODE_OTG:
+	switch (dwc->current_dr_role) {
+	case DWC3_GCTL_PRTCAP_DEVICE:
 		spin_lock_irqsave(&dwc->lock, flags);
 		dwc3_gadget_suspend(dwc);
 		spin_unlock_irqrestore(&dwc->lock, flags);
+		dwc3_core_exit(dwc);
 		break;
-	case USB_DR_MODE_HOST:
+	case DWC3_GCTL_PRTCAP_HOST:
 	default:
 		/* do nothing */
 		break;
 	}
 
-	dwc3_core_exit(dwc);
-
 	return 0;
 }
 
@@ -1316,18 +1304,17 @@ static int dwc3_resume_common(struct dwc3 *dwc)
 	unsigned long	flags;
 	int		ret;
 
-	ret = dwc3_core_init(dwc);
-	if (ret)
-		return ret;
+	switch (dwc->current_dr_role) {
+	case DWC3_GCTL_PRTCAP_DEVICE:
+		ret = dwc3_core_init(dwc);
+		if (ret)
+			return ret;
 
-	switch (dwc->dr_mode) {
-	case USB_DR_MODE_PERIPHERAL:
-	case USB_DR_MODE_OTG:
 		spin_lock_irqsave(&dwc->lock, flags);
 		dwc3_gadget_resume(dwc);
 		spin_unlock_irqrestore(&dwc->lock, flags);
-		/* FALLTHROUGH */
-	case USB_DR_MODE_HOST:
+		break;
+	case DWC3_GCTL_PRTCAP_HOST:
 	default:
 		/* do nothing */
 		break;
@@ -1338,7 +1325,7 @@ static int dwc3_resume_common(struct dwc3 *dwc)
 
 static int dwc3_runtime_checks(struct dwc3 *dwc)
 {
-	switch (dwc->dr_mode) {
+	switch (dwc->current_dr_role) {
 	case USB_DR_MODE_PERIPHERAL:
 	case USB_DR_MODE_OTG:
 		if (dwc->connected)
@@ -1381,19 +1368,17 @@ static int dwc3_runtime_resume(struct device *dev)
 	if (ret)
 		return ret;
 
-	switch (dwc->dr_mode) {
-	case USB_DR_MODE_PERIPHERAL:
-	case USB_DR_MODE_OTG:
+	switch (dwc->current_dr_role) {
+	case DWC3_GCTL_PRTCAP_DEVICE:
 		dwc3_gadget_process_pending_events(dwc);
 		break;
-	case USB_DR_MODE_HOST:
+	case DWC3_GCTL_PRTCAP_HOST:
 	default:
 		/* do nothing */
 		break;
 	}
 
 	pm_runtime_mark_last_busy(dev);
-	pm_runtime_put(dev);
 
 	return 0;
 }
@@ -1402,13 +1387,12 @@ static int dwc3_runtime_idle(struct device *dev)
 {
 	struct dwc3     *dwc = dev_get_drvdata(dev);
 
-	switch (dwc->dr_mode) {
-	case USB_DR_MODE_PERIPHERAL:
-	case USB_DR_MODE_OTG:
+	switch (dwc->current_dr_role) {
+	case DWC3_GCTL_PRTCAP_DEVICE:
 		if (dwc3_runtime_checks(dwc))
 			return -EBUSY;
 		break;
-	case USB_DR_MODE_HOST:
+	case DWC3_GCTL_PRTCAP_HOST:
 	default:
 		/* do nothing */
 		break;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index ea910acb4bb0..4a4a4c98508c 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * core.h - DesignWare USB3 DRD Core Header
  *
@@ -5,15 +6,6 @@
  *
  * Authors: Felipe Balbi <balbi@ti.com>,
  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __DRIVERS_USB_DWC3_CORE_H
@@ -529,6 +521,7 @@ struct dwc3_event_buffer {
  * @number: endpoint number (1 - 15)
  * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK
  * @resource_index: Resource transfer index
+ * @frame_number: set to the frame number we want this transfer to start (ISOC)
  * @interval: the interval on which the ISOC transfer is started
  * @allocated_requests: number of requests allocated
  * @queued_requests: number of requests queued for transfer
@@ -581,6 +574,7 @@ struct dwc3_ep {
 	u8			resource_index;
 	u32			allocated_requests;
 	u32			queued_requests;
+	u32			frame_number;
 	u32			interval;
 
 	char			name[20];
diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
index 5e9c070ec874..368f8e59219a 100644
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * debug.h - DesignWare USB3 DRD Controller Debug Header
  *
@@ -5,15 +6,6 @@
  *
  * Authors: Felipe Balbi <balbi@ti.com>,
  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __DWC3_DEBUG_H
diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
index 4e09be80e59f..00e65530c81e 100644
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * debugfs.c - DesignWare USB3 DRD Controller DebugFS file
  *
@@ -5,15 +6,6 @@
  *
  * Authors: Felipe Balbi <balbi@ti.com>,
  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 2765c51c7ef5..cc8ab9a8e9d2 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -1,21 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * drd.c - DesignWare USB3 DRD Controller Dual-role support
  *
  * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com
  *
  * Authors: Roger Quadros <rogerq@ti.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 #include <linux/extcon.h>
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index e089df72f766..a94fb1ba8f2c 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * dwc3-exynos.c - Samsung EXYNOS DWC3 Specific Glue layer
  *
@@ -5,15 +6,6 @@
  *		http://www.samsung.com
  *
  * Author: Anton Tikhomirov <av.tikhomirov@samsung.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/dwc3/dwc3-keystone.c b/drivers/usb/dwc3/dwc3-keystone.c
index d2ed9523e77c..193a9a88222a 100644
--- a/drivers/usb/dwc3/dwc3-keystone.c
+++ b/drivers/usb/dwc3/dwc3-keystone.c
@@ -1,18 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * dwc3-keystone.c - Keystone Specific Glue layer
  *
  * Copyright (C) 2010-2013 Texas Instruments Incorporated - http://www.ti.com
  *
  * Author: WingMan Kwok <w-kwok2@ti.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index a26d1fde0f5e..c4a4d7bd2766 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * dwc3-of-simple.c - OF glue layer for simple integrations
  *
@@ -5,15 +6,6 @@
  *
  * Author: Felipe Balbi <balbi@ti.com>
  *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  * This is a combination of the old dwc3-qcom.c by Ivan T. Ivanov
  * <iivanov@mm-sol.com> and the original patch adding support for Xilinx' SoC
  * by Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com>
@@ -28,11 +20,13 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/pm_runtime.h>
+#include <linux/reset.h>
 
 struct dwc3_of_simple {
 	struct device		*dev;
 	struct clk		**clks;
 	int			num_clocks;
+	struct reset_control	*resets;
 };
 
 static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count)
@@ -95,10 +89,21 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, simple);
 	simple->dev = dev;
 
+	simple->resets = of_reset_control_array_get_optional_exclusive(np);
+	if (IS_ERR(simple->resets)) {
+		ret = PTR_ERR(simple->resets);
+		dev_err(dev, "failed to get device resets, err=%d\n", ret);
+		return ret;
+	}
+
+	ret = reset_control_deassert(simple->resets);
+	if (ret)
+		goto err_resetc_put;
+
 	ret = dwc3_of_simple_clk_init(simple, of_count_phandle_with_args(np,
 						"clocks", "#clock-cells"));
 	if (ret)
-		return ret;
+		goto err_resetc_assert;
 
 	ret = of_platform_populate(np, NULL, NULL, dev);
 	if (ret) {
@@ -107,7 +112,7 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
 			clk_put(simple->clks[i]);
 		}
 
-		return ret;
+		goto err_resetc_assert;
 	}
 
 	pm_runtime_set_active(dev);
@@ -115,6 +120,13 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
 	pm_runtime_get_sync(dev);
 
 	return 0;
+
+err_resetc_assert:
+	reset_control_assert(simple->resets);
+
+err_resetc_put:
+	reset_control_put(simple->resets);
+	return ret;
 }
 
 static int dwc3_of_simple_remove(struct platform_device *pdev)
@@ -123,12 +135,15 @@ static int dwc3_of_simple_remove(struct platform_device *pdev)
 	struct device		*dev = &pdev->dev;
 	int			i;
 
+	of_platform_depopulate(dev);
+
 	for (i = 0; i < simple->num_clocks; i++) {
 		clk_disable_unprepare(simple->clks[i]);
 		clk_put(simple->clks[i]);
 	}
 
-	of_platform_depopulate(dev);
+	reset_control_assert(simple->resets);
+	reset_control_put(simple->resets);
 
 	pm_runtime_put_sync(dev);
 	pm_runtime_disable(dev);
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 3530795bbb8f..a4719e853b85 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * dwc3-omap.c - OMAP Specific Glue layer
  *
@@ -5,15 +6,6 @@
  *
  * Authors: Felipe Balbi <balbi@ti.com>,
  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 54343fbd85ee..3ba11136ebf0 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * dwc3-pci.c - PCI Specific glue layer
  *
@@ -5,21 +6,13 @@
  *
  * Authors: Felipe Balbi <balbi@ti.com>,
  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
+#include <linux/workqueue.h>
 #include <linux/pm_runtime.h>
 #include <linux/platform_device.h>
 #include <linux/gpio/consumer.h>
@@ -61,6 +54,7 @@ struct dwc3_pci {
 	guid_t guid;
 
 	unsigned int has_dsm_for_pm:1;
+	struct work_struct wakeup_work;
 };
 
 static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
@@ -174,6 +168,22 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static void dwc3_pci_resume_work(struct work_struct *work)
+{
+	struct dwc3_pci *dwc = container_of(work, struct dwc3_pci, wakeup_work);
+	struct platform_device *dwc3 = dwc->dwc3;
+	int ret;
+
+	ret = pm_runtime_get_sync(&dwc3->dev);
+	if (ret)
+		return;
+
+	pm_runtime_mark_last_busy(&dwc3->dev);
+	pm_runtime_put_sync_autosuspend(&dwc3->dev);
+}
+#endif
+
 static int dwc3_pci_probe(struct pci_dev *pci,
 		const struct pci_device_id *id)
 {
@@ -232,6 +242,9 @@ static int dwc3_pci_probe(struct pci_dev *pci,
 	device_init_wakeup(dev, true);
 	pci_set_drvdata(pci, dwc);
 	pm_runtime_put(dev);
+#ifdef CONFIG_PM
+	INIT_WORK(&dwc->wakeup_work, dwc3_pci_resume_work);
+#endif
 
 	return 0;
 err:
@@ -243,6 +256,9 @@ static void dwc3_pci_remove(struct pci_dev *pci)
 {
 	struct dwc3_pci		*dwc = pci_get_drvdata(pci);
 
+#ifdef CONFIG_PM
+	cancel_work_sync(&dwc->wakeup_work);
+#endif
 	device_init_wakeup(&pci->dev, false);
 	pm_runtime_get(&pci->dev);
 	platform_device_unregister(dwc->dwc3);
@@ -318,14 +334,15 @@ static int dwc3_pci_runtime_suspend(struct device *dev)
 static int dwc3_pci_runtime_resume(struct device *dev)
 {
 	struct dwc3_pci		*dwc = dev_get_drvdata(dev);
-	struct platform_device	*dwc3 = dwc->dwc3;
 	int			ret;
 
 	ret = dwc3_pci_dsm(dwc, PCI_INTEL_BXT_STATE_D0);
 	if (ret)
 		return ret;
 
-	return pm_runtime_get(&dwc3->dev);
+	queue_work(pm_wq, &dwc->wakeup_work);
+
+	return 0;
 }
 #endif /* CONFIG_PM */
 
diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c
index 505676fd3ba4..16081383c401 100644
--- a/drivers/usb/dwc3/dwc3-st.c
+++ b/drivers/usb/dwc3/dwc3-st.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /**
  * dwc3-st.c Support for dwc3 platform devices on ST Microelectronics platforms
  *
@@ -10,11 +11,6 @@
  * Contributors: Aymen Bouattay <aymen.bouattay@st.com>
  *               Peter Griffin <peter.griffin@linaro.org>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
  * Inspired by dwc3-omap.c and dwc3-exynos.c.
  */
 
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 75e6cb044eb2..fd3e7ad2eb0e 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * ep0.c - DesignWare USB3 DRD Controller Endpoint 0 Handling
  *
@@ -5,15 +6,6 @@
  *
  * Authors: Felipe Balbi <balbi@ti.com>,
  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/kernel.h>
@@ -487,14 +479,10 @@ static int dwc3_ep0_handle_device(struct dwc3 *dwc,
 static int dwc3_ep0_handle_intf(struct dwc3 *dwc,
 		struct usb_ctrlrequest *ctrl, int set)
 {
-	enum usb_device_state	state;
 	u32			wValue;
-	u32			wIndex;
 	int			ret = 0;
 
 	wValue = le16_to_cpu(ctrl->wValue);
-	wIndex = le16_to_cpu(ctrl->wIndex);
-	state = dwc->gadget.state;
 
 	switch (wValue) {
 	case USB_INTRF_FUNC_SUSPEND:
@@ -517,14 +505,10 @@ static int dwc3_ep0_handle_endpoint(struct dwc3 *dwc,
 		struct usb_ctrlrequest *ctrl, int set)
 {
 	struct dwc3_ep		*dep;
-	enum usb_device_state	state;
 	u32			wValue;
-	u32			wIndex;
 	int			ret;
 
 	wValue = le16_to_cpu(ctrl->wValue);
-	wIndex = le16_to_cpu(ctrl->wIndex);
-	state = dwc->gadget.state;
 
 	switch (wValue) {
 	case USB_ENDPOINT_HALT:
@@ -551,10 +535,8 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
 {
 	u32			recip;
 	int			ret;
-	enum usb_device_state	state;
 
 	recip = ctrl->bRequestType & USB_RECIP_MASK;
-	state = dwc->gadget.state;
 
 	switch (recip) {
 	case USB_RECIP_DEVICE:
@@ -712,12 +694,10 @@ static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 	struct dwc3_ep	*dep;
 	enum usb_device_state state = dwc->gadget.state;
 	u16		wLength;
-	u16		wValue;
 
 	if (state == USB_STATE_DEFAULT)
 		return -EINVAL;
 
-	wValue = le16_to_cpu(ctrl->wValue);
 	wLength = le16_to_cpu(ctrl->wLength);
 
 	if (wLength != 6) {
@@ -842,9 +822,6 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 	struct usb_request	*ur;
 	struct dwc3_trb		*trb;
 	struct dwc3_ep		*ep0;
-	unsigned		maxp;
-	unsigned		remaining_ur_length;
-	void			*buf;
 	u32			transferred = 0;
 	u32			status;
 	u32			length;
@@ -871,11 +848,8 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 	}
 
 	ur = &r->request;
-	buf = ur->buf;
-	remaining_ur_length = ur->length;
 
 	length = trb->size & DWC3_TRB_SIZE_MASK;
-	maxp = ep0->endpoint.maxpacket;
 	transferred = ur->length - length;
 	ur->actual += transferred;
 
@@ -1001,7 +975,6 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 	} else if (IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) &&
 		   req->request.length && req->request.zero) {
 		u32	maxpacket;
-		u32	rem;
 
 		ret = usb_gadget_map_request_by_dev(dwc->sysdev,
 				&req->request, dep->number);
@@ -1009,7 +982,6 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 			return;
 
 		maxpacket = dep->endpoint.maxpacket;
-		rem = req->request.length % maxpacket;
 
 		/* prepare normal TRB */
 		dwc3_ep0_prepare_one_trb(dep, req->request.dma,
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index f064f1549333..981fd986cf82 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * gadget.c - DesignWare USB3 DRD Controller Gadget Framework Link
  *
@@ -5,15 +6,6 @@
  *
  * Authors: Felipe Balbi <balbi@ti.com>,
  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/kernel.h>
@@ -1151,9 +1143,6 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep)
 
 	BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
 
-	if (!dwc3_calc_trbs_left(dep))
-		return;
-
 	/*
 	 * We can get in a situation where there's a request in the started list
 	 * but there weren't enough TRBs to fully kick it in the first time
@@ -1194,7 +1183,7 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep)
 	}
 }
 
-static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param)
+static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep)
 {
 	struct dwc3_gadget_ep_cmd_params params;
 	struct dwc3_request		*req;
@@ -1202,6 +1191,9 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param)
 	int				ret;
 	u32				cmd;
 
+	if (!dwc3_calc_trbs_left(dep))
+		return 0;
+
 	starting = !(dep->flags & DWC3_EP_BUSY);
 
 	dwc3_prepare_trbs(dep);
@@ -1216,8 +1208,10 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param)
 	if (starting) {
 		params.param0 = upper_32_bits(req->trb_dma);
 		params.param1 = lower_32_bits(req->trb_dma);
-		cmd = DWC3_DEPCMD_STARTTRANSFER |
-			DWC3_DEPCMD_PARAM(cmd_param);
+		cmd = DWC3_DEPCMD_STARTTRANSFER;
+
+		if (usb_endpoint_xfer_isoc(dep->endpoint.desc))
+			cmd |= DWC3_DEPCMD_PARAM(dep->frame_number);
 	} else {
 		cmd = DWC3_DEPCMD_UPDATETRANSFER |
 			DWC3_DEPCMD_PARAM(dep->resource_index);
@@ -1258,8 +1252,6 @@ static int __dwc3_gadget_get_frame(struct dwc3 *dwc)
 static void __dwc3_gadget_start_isoc(struct dwc3 *dwc,
 		struct dwc3_ep *dep, u32 cur_uf)
 {
-	u32 uf;
-
 	if (list_empty(&dep->pending_list)) {
 		dev_info(dwc->dev, "%s: ran out of requests\n",
 				dep->name);
@@ -1271,9 +1263,8 @@ static void __dwc3_gadget_start_isoc(struct dwc3 *dwc,
 	 * Schedule the first trb for one interval in the future or at
 	 * least 4 microframes.
 	 */
-	uf = cur_uf + max_t(u32, 4, dep->interval);
-
-	__dwc3_gadget_kick_transfer(dep, uf);
+	dep->frame_number = cur_uf + max_t(u32, 4, dep->interval);
+	__dwc3_gadget_kick_transfer(dep);
 }
 
 static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
@@ -1290,7 +1281,6 @@ static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
 static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 {
 	struct dwc3		*dwc = dep->dwc;
-	int			ret = 0;
 
 	if (!dep->endpoint.desc) {
 		dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
@@ -1337,24 +1327,14 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 		}
 
 		if ((dep->flags & DWC3_EP_BUSY) &&
-		    !(dep->flags & DWC3_EP_MISSED_ISOC)) {
-			WARN_ON_ONCE(!dep->resource_index);
-			ret = __dwc3_gadget_kick_transfer(dep,
-							  dep->resource_index);
-		}
-
-		goto out;
-	}
+		    !(dep->flags & DWC3_EP_MISSED_ISOC))
+			goto out;
 
-	if (!dwc3_calc_trbs_left(dep))
 		return 0;
+	}
 
-	ret = __dwc3_gadget_kick_transfer(dep, 0);
 out:
-	if (ret == -EBUSY)
-		ret = 0;
-
-	return ret;
+	return __dwc3_gadget_kick_transfer(dep);
 }
 
 static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
@@ -2347,7 +2327,7 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
 		req->request.actual = length - req->remaining;
 
 		if ((req->request.actual < length) && req->num_pending_sgs)
-			return __dwc3_gadget_kick_transfer(dep, 0);
+			return __dwc3_gadget_kick_transfer(dep);
 
 		dwc3_gadget_giveback(dep, req, status);
 
@@ -2440,13 +2420,8 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
 	if (!dep->endpoint.desc)
 		return;
 
-	if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
-		int ret;
-
-		ret = __dwc3_gadget_kick_transfer(dep, 0);
-		if (!ret || ret == -EBUSY)
-			return;
-	}
+	if (!usb_endpoint_xfer_isoc(dep->endpoint.desc))
+		__dwc3_gadget_kick_transfer(dep);
 }
 
 static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
@@ -2487,15 +2462,10 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 		dwc3_endpoint_transfer_complete(dwc, dep, event);
 		break;
 	case DWC3_DEPEVT_XFERNOTREADY:
-		if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
+		if (usb_endpoint_xfer_isoc(dep->endpoint.desc))
 			dwc3_gadget_start_isoc(dwc, dep, event);
-		} else {
-			int ret;
-
-			ret = __dwc3_gadget_kick_transfer(dep, 0);
-			if (!ret || ret == -EBUSY)
-				return;
-		}
+		else
+			__dwc3_gadget_kick_transfer(dep);
 
 		break;
 	case DWC3_DEPEVT_STREAMEVT:
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index 4a3227543255..578aa856f986 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * gadget.h - DesignWare USB3 DRD Gadget Header
  *
@@ -5,15 +6,6 @@
  *
  * Authors: Felipe Balbi <balbi@ti.com>,
  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __DRIVERS_USB_DWC3_GADGET_H
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index 76f0b0df37c1..1a3878a3be78 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -1,18 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * host.c - DesignWare USB3 DRD Controller Host Glue
  *
  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
  *
  * Authors: Felipe Balbi <balbi@ti.com>,
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/platform_device.h>
diff --git a/drivers/usb/dwc3/io.h b/drivers/usb/dwc3/io.h
index c69b06696824..70acdf94a0bf 100644
--- a/drivers/usb/dwc3/io.h
+++ b/drivers/usb/dwc3/io.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * io.h - DesignWare USB3 DRD IO Header
  *
@@ -5,15 +6,6 @@
  *
  * Authors: Felipe Balbi <balbi@ti.com>,
  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __DRIVERS_USB_DWC3_IO_H
diff --git a/drivers/usb/dwc3/trace.c b/drivers/usb/dwc3/trace.c
index 6cd166412ad0..f8886f3f3c9e 100644
--- a/drivers/usb/dwc3/trace.c
+++ b/drivers/usb/dwc3/trace.c
@@ -1,18 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * trace.c - DesignWare USB3 DRD Controller Trace Support
  *
  * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
  *
  * Author: Felipe Balbi <balbi@ti.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #define CREATE_TRACE_POINTS
diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h
index 6504b116da04..a9dd5c64e6c7 100644
--- a/drivers/usb/dwc3/trace.h
+++ b/drivers/usb/dwc3/trace.h
@@ -1,18 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * trace.h - DesignWare USB3 DRD Controller Trace Support
  *
  * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
  *
  * Author: Felipe Balbi <balbi@ti.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #undef TRACE_SYSTEM
diff --git a/drivers/usb/dwc3/ulpi.c b/drivers/usb/dwc3/ulpi.c
index e87ce8e9edee..f62b5f3c2d67 100644
--- a/drivers/usb/dwc3/ulpi.c
+++ b/drivers/usb/dwc3/ulpi.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * ulpi.c - DesignWare USB3 Controller's ULPI PHY interface
  *
  * Copyright (C) 2015 Intel Corporation
  *
  * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/ulpi/regs.h>
diff --git a/drivers/usb/early/Makefile b/drivers/usb/early/Makefile
index fcde2286da1c..7b77b49d3b8c 100644
--- a/drivers/usb/early/Makefile
+++ b/drivers/usb/early/Makefile
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # Makefile for early USB devices
 #
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index e2654443e8eb..d633c2abe5a4 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Standalone EHCI usb debug driver
  *
diff --git a/drivers/usb/early/xhci-dbc.c b/drivers/usb/early/xhci-dbc.c
index 12fe70beae69..8a700b45b9a9 100644
--- a/drivers/usb/early/xhci-dbc.c
+++ b/drivers/usb/early/xhci-dbc.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * xhci-dbc.c - xHCI debug capability early driver
  *
  * Copyright (C) 2016 Intel Corporation
  *
  * Author: Lu Baolu <baolu.lu@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #define pr_fmt(fmt)	KBUILD_MODNAME ":%s: " fmt, __func__
diff --git a/drivers/usb/early/xhci-dbc.h b/drivers/usb/early/xhci-dbc.h
index 2df0f6e613fe..673686eeddd7 100644
--- a/drivers/usb/early/xhci-dbc.h
+++ b/drivers/usb/early/xhci-dbc.h
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * xhci-dbc.h - xHCI debug capability early driver
  *
  * Copyright (C) 2016 Intel Corporation
  *
  * Author: Lu Baolu <baolu.lu@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef __LINUX_XHCI_DBC_H
@@ -90,8 +87,8 @@ struct xdbc_context {
 
 #define XDBC_INFO_CONTEXT_SIZE		48
 #define XDBC_MAX_STRING_LENGTH		64
-#define XDBC_STRING_MANUFACTURER	"Linux"
-#define XDBC_STRING_PRODUCT		"Remote GDB"
+#define XDBC_STRING_MANUFACTURER	"Linux Foundation"
+#define XDBC_STRING_PRODUCT		"Linux USB GDB Target"
 #define XDBC_STRING_SERIAL		"0001"
 
 struct xdbc_strings {
@@ -103,7 +100,7 @@ struct xdbc_strings {
 
 #define XDBC_PROTOCOL		1	/* GNU Remote Debug Command Set */
 #define XDBC_VENDOR_ID		0x1d6b	/* Linux Foundation 0x1d6b */
-#define XDBC_PRODUCT_ID		0x0004	/* __le16 idProduct; device 0004 */
+#define XDBC_PRODUCT_ID		0x0011	/* __le16 idProduct; device 0011 */
 #define XDBC_DEVICE_REV		0x0010	/* 0.10 */
 
 /*
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 5d061b3d8224..eec14e6ed20b 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * composite.c - infrastructure for Composite USB Gadgets
  *
  * Copyright (C) 2006-2008 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 /* #define VERBOSE_DEBUG */
@@ -170,20 +166,20 @@ int config_ep_by_speed(struct usb_gadget *g,
 			want_comp_desc = 1;
 			break;
 		}
-		/* else: Fall trough */
+		/* fall through */
 	case USB_SPEED_SUPER:
 		if (gadget_is_superspeed(g)) {
 			speed_desc = f->ss_descriptors;
 			want_comp_desc = 1;
 			break;
 		}
-		/* else: Fall trough */
+		/* fall through */
 	case USB_SPEED_HIGH:
 		if (gadget_is_dualspeed(g)) {
 			speed_desc = f->hs_descriptors;
 			break;
 		}
-		/* else: fall through */
+		/* fall through */
 	default:
 		speed_desc = f->fs_descriptors;
 	}
@@ -224,6 +220,7 @@ ep_found:
 		case USB_ENDPOINT_XFER_ISOC:
 			/* mult: bits 1:0 of bmAttributes */
 			_ep->mult = (comp_desc->bmAttributes & 0x3) + 1;
+			/* fall through */
 		case USB_ENDPOINT_XFER_BULK:
 		case USB_ENDPOINT_XFER_INT:
 			_ep->maxburst = comp_desc->bMaxBurst + 1;
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index 17a6077b89a4..2d115353424c 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * usb/gadget/config.c -- simplify building config descriptors
  *
  * Copyright (C) 2003 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/errno.h>
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index aeb9f3c40521..4ddf063b9f47 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include <linux/configfs.h>
 #include <linux/module.h>
 #include <linux/slab.h>
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 30fdab0ae383..71b15c65b90f 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * epautoconf.c -- endpoint autoconfiguration for usb gadget drivers
  *
  * Copyright (C) 2004 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/function/f_acm.c b/drivers/usb/gadget/function/f_acm.c
index 5e3828d9dac7..7140bf3c74fa 100644
--- a/drivers/usb/gadget/function/f_acm.c
+++ b/drivers/usb/gadget/function/f_acm.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * f_acm.c -- USB CDC serial (ACM) function driver
  *
@@ -6,10 +7,6 @@
  * Copyright (C) 2008 by Nokia Corporation
  * Copyright (C) 2009 by Samsung Electronics
  * Author: Michal Nazarewicz (mina86@mina86.com)
- *
- * This software is distributed under the terms of the GNU General
- * Public License ("GPL") as published by the Free Software Foundation,
- * either version 2 of that License or (at your option) any later version.
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/function/f_ecm.c b/drivers/usb/gadget/function/f_ecm.c
index 4c488d15b6f6..b322ca20cd98 100644
--- a/drivers/usb/gadget/function/f_ecm.c
+++ b/drivers/usb/gadget/function/f_ecm.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * f_ecm.c -- USB CDC Ethernet (ECM) link function driver
  *
  * Copyright (C) 2003-2005,2008 David Brownell
  * Copyright (C) 2008 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/function/f_eem.c b/drivers/usb/gadget/function/f_eem.c
index 007ec6e4a5d4..def3a450a340 100644
--- a/drivers/usb/gadget/function/f_eem.c
+++ b/drivers/usb/gadget/function/f_eem.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * f_eem.c -- USB CDC Ethernet (EEM) link function driver
  *
  * Copyright (C) 2003-2005,2008 David Brownell
  * Copyright (C) 2008 Nokia Corporation
  * Copyright (C) 2009 EF Johnson Technologies
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 8b342587f8ad..b1001c3f43fb 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * f_fs.c -- user mode file system API for USB composite function controllers
  *
@@ -7,11 +8,6 @@
  * Based on inode.c (GadgetFS) which was:
  * Copyright (C) 2003-2004 David Brownell
  * Copyright (C) 2003 Agilent Technologies
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 
@@ -3677,6 +3673,7 @@ static void ffs_closed(struct ffs_data *ffs)
 		goto done;
 
 	ffs_obj->desc_ready = false;
+	ffs_obj->ffs_data = NULL;
 
 	if (test_and_clear_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags) &&
 	    ffs_obj->ffs_closed_callback)
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index d8e359ef6eb1..52576f1b57f1 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * f_hid.c -- USB HID function driver
  *
  * Copyright (C) 2010 Fabien Chouteau <fabien.chouteau@barco.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/function/f_loopback.c b/drivers/usb/gadget/function/f_loopback.c
index e70093835e14..ed3b054a0a2e 100644
--- a/drivers/usb/gadget/function/f_loopback.c
+++ b/drivers/usb/gadget/function/f_loopback.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * f_loopback.c - USB peripheral loopback configuration driver
  *
  * Copyright (C) 2003-2008 David Brownell
  * Copyright (C) 2008 by Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c
index 5153e29870c3..697224237976 100644
--- a/drivers/usb/gadget/function/f_mass_storage.c
+++ b/drivers/usb/gadget/function/f_mass_storage.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * f_mass_storage.c -- Mass Storage USB Composite Function
  *
diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c
index 5d3d7941d2c2..5ea713a975c7 100644
--- a/drivers/usb/gadget/function/f_midi.c
+++ b/drivers/usb/gadget/function/f_midi.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * f_midi.c -- USB MIDI class function driver
  *
@@ -15,8 +16,6 @@
  * and drivers/usb/gadget/midi.c,
  *   Copyright (C) 2006 Thumtronics Pty Ltd.
  *   Ben Williamson <ben.williamson@greyinnovation.com>
- *
- * Licensed under the GPL-2 or later.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c
index 45b334ceaf2e..87d4e7767f96 100644
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * f_ncm.c -- USB CDC Network (NCM) link function driver
  *
@@ -8,11 +9,6 @@
  *
  * Copyright (C) 2003-2005,2008 David Brownell
  * Copyright (C) 2008 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/function/f_obex.c b/drivers/usb/gadget/function/f_obex.c
index d43e86cea74f..082f948aa7fd 100644
--- a/drivers/usb/gadget/function/f_obex.c
+++ b/drivers/usb/gadget/function/f_obex.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * f_obex.c -- USB CDC OBEX function driver
  *
@@ -5,11 +6,6 @@
  * Contact: Felipe Balbi <felipe.balbi@nokia.com>
  *
  * Based on f_acm.c by Al Borchers and David Brownell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/function/f_phonet.c b/drivers/usb/gadget/function/f_phonet.c
index 9c4c58e4a1a2..2d867b1ffb47 100644
--- a/drivers/usb/gadget/function/f_phonet.c
+++ b/drivers/usb/gadget/function/f_phonet.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * f_phonet.c -- USB CDC Phonet function
  *
  * Copyright (C) 2007-2008 Nokia Corporation. All rights reserved.
  *
  * Author: Rémi Denis-Courmont
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
  */
 
 #include <linux/mm.h>
@@ -215,6 +212,7 @@ static void pn_tx_complete(struct usb_ep *ep, struct usb_request *req)
 	case -ESHUTDOWN: /* disconnected */
 	case -ECONNRESET: /* disabled */
 		dev->stats.tx_aborted_errors++;
+		/* fall through */
 	default:
 		dev->stats.tx_errors++;
 	}
@@ -362,6 +360,7 @@ static void pn_rx_complete(struct usb_ep *ep, struct usb_request *req)
 	/* Do resubmit in these cases: */
 	case -EOVERFLOW: /* request buffer overflow */
 		dev->stats.rx_over_errors++;
+		/* fall through */
 	default:
 		dev->stats.rx_errors++;
 		break;
diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index ea0da35a44e2..587575453f48 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * f_printer.c - USB printer function driver
  *
@@ -8,11 +9,6 @@
  *
  * Copyright (C) 2003-2005 David Brownell
  * Copyright (C) 2006 Craig W. Nadler
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/gadget/function/f_rndis.c b/drivers/usb/gadget/function/f_rndis.c
index c7c5b3ce1d98..9c5bf92c4617 100644
--- a/drivers/usb/gadget/function/f_rndis.c
+++ b/drivers/usb/gadget/function/f_rndis.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * f_rndis.c -- RNDIS link function driver
  *
@@ -6,11 +7,6 @@
  * Copyright (C) 2008 Nokia Corporation
  * Copyright (C) 2009 Samsung Electronics
  *                    Author: Michal Nazarewicz (mina86@mina86.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/function/f_serial.c b/drivers/usb/gadget/function/f_serial.c
index cb00ada21d9c..a41fb83e353e 100644
--- a/drivers/usb/gadget/function/f_serial.c
+++ b/drivers/usb/gadget/function/f_serial.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * f_serial.c - generic USB serial function driver
  *
  * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
  * Copyright (C) 2008 by David Brownell
  * Copyright (C) 2008 by Nokia Corporation
- *
- * This software is distributed under the terms of the GNU General
- * Public License ("GPL") as published by the Free Software Foundation,
- * either version 2 of that License or (at your option) any later version.
  */
 
 #include <linux/slab.h>
diff --git a/drivers/usb/gadget/function/f_sourcesink.c b/drivers/usb/gadget/function/f_sourcesink.c
index 8784fa12ea2c..39757dd04744 100644
--- a/drivers/usb/gadget/function/f_sourcesink.c
+++ b/drivers/usb/gadget/function/f_sourcesink.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * f_sourcesink.c - USB peripheral source/sink configuration driver
  *
  * Copyright (C) 2003-2008 David Brownell
  * Copyright (C) 2008 by Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/function/f_subset.c b/drivers/usb/gadget/function/f_subset.c
index 434b983f3b4c..a52d17a69977 100644
--- a/drivers/usb/gadget/function/f_subset.c
+++ b/drivers/usb/gadget/function/f_subset.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * f_subset.c -- "CDC Subset" Ethernet link function driver
  *
  * Copyright (C) 2003-2005,2008 David Brownell
  * Copyright (C) 2008 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/slab.h>
diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c
index a82e2bd5ea34..28cb53de51b8 100644
--- a/drivers/usb/gadget/function/f_tcm.c
+++ b/drivers/usb/gadget/function/f_tcm.c
@@ -1,10 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /* Target based USB-Gadget
  *
  * UAS protocol handling, target callbacks, configfs handling,
  * BBB (USB Mass Storage Class Bulk-Only (BBB) and Transport protocol handling.
  *
  * Author: Sebastian Andrzej Siewior <bigeasy at linutronix dot de>
- * License: GPLv2 as published by FSF.
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -1145,6 +1145,7 @@ static int usbg_submit_command(struct f_uas *fu,
 	default:
 		pr_debug_once("Unsupported prio_attr: %02x.\n",
 				cmd_iu->prio_attr);
+		/* fall through */
 	case UAS_SIMPLE_TAG:
 		cmd->prio_attr = TCM_SIMPLE_TAG;
 		break;
diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c
index 29efbedc91f9..91e3f3e6bf78 100644
--- a/drivers/usb/gadget/function/f_uac1.c
+++ b/drivers/usb/gadget/function/f_uac1.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * f_uac1.c -- USB Audio Class 1.0 Function (using u_audio API)
  *
@@ -10,11 +11,6 @@
  * This file is based on f_uac1.c which is
  *   Copyright (C) 2008 Bryan Wu <cooloney@kernel.org>
  *   Copyright (C) 2008 Analog Devices, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/usb/audio.h>
diff --git a/drivers/usb/gadget/function/f_uac1_legacy.c b/drivers/usb/gadget/function/f_uac1_legacy.c
index 5d229e72912e..8bd6f6e8d24a 100644
--- a/drivers/usb/gadget/function/f_uac1_legacy.c
+++ b/drivers/usb/gadget/function/f_uac1_legacy.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * f_audio.c -- USB Audio class function driver
   *
@@ -5,8 +6,6 @@
  * Copyright (C) 2008 Analog Devices, Inc
  *
  * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
  */
 
 #include <linux/slab.h>
diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c
index f05c3f3e6103..9dc33a70db33 100644
--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * f_uac2.c -- USB Audio Class 2.0 Function
  *
  * Copyright (C) 2011
  *    Yadwinder Singh (yadi.brar01@gmail.com)
  *    Jaswinder Singh (jaswinder.singh@linaro.org)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/usb/audio.h>
diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
index f8a1881609a2..439eba660e95 100644
--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *	uvc_gadget.c  --  USB Video Class Gadget driver
  *
  *	Copyright (C) 2009-2010
  *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/function/f_uvc.h b/drivers/usb/gadget/function/f_uvc.h
index d0a73bdcbba1..81defe4557fe 100644
--- a/drivers/usb/gadget/function/f_uvc.h
+++ b/drivers/usb/gadget/function/f_uvc.h
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *	f_uvc.h  --  USB Video Class Gadget driver
  *
  *	Copyright (C) 2009-2010
  *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
  */
 
 #ifndef _F_UVC_H_
diff --git a/drivers/usb/gadget/function/rndis.c b/drivers/usb/gadget/function/rndis.c
index d6341045c631..51dd3e90b06c 100644
--- a/drivers/usb/gadget/function/rndis.c
+++ b/drivers/usb/gadget/function/rndis.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * RNDIS MSG parser
  *
  * Authors:	Benedikt Spranger, Pengutronix
  *		Robert Schwebel, Pengutronix
  *
- *              This program is free software; you can redistribute it and/or
- *              modify it under the terms of the GNU General Public License
- *              version 2, as published by the Free Software Foundation.
- *
  *		This software was originally developed in conformance with
  *		Microsoft's Remote NDIS Specification License Agreement.
  *
diff --git a/drivers/usb/gadget/function/rndis.h b/drivers/usb/gadget/function/rndis.h
index 21e0430ffb98..c7e3a70ce6c1 100644
--- a/drivers/usb/gadget/function/rndis.h
+++ b/drivers/usb/gadget/function/rndis.h
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * RNDIS	Definitions for Remote NDIS
  *
  * Authors:	Benedikt Spranger, Pengutronix
  *		Robert Schwebel, Pengutronix
  *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		version 2, as published by the Free Software Foundation.
- *
  *		This software was originally developed in conformance with
  *		Microsoft's Remote NDIS Specification License Agreement.
  */
diff --git a/drivers/usb/gadget/function/storage_common.c b/drivers/usb/gadget/function/storage_common.c
index 8fbf6861690d..f7e6c42558eb 100644
--- a/drivers/usb/gadget/function/storage_common.c
+++ b/drivers/usb/gadget/function/storage_common.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * storage_common.c -- Common definitions for mass storage functionality
  *
  * Copyright (C) 2003-2008 Alan Stern
  * Copyeight (C) 2009 Samsung Electronics
  * Author: Michal Nazarewicz (mina86@mina86.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 /*
diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c
index 3971bbab88bd..a72295c953bb 100644
--- a/drivers/usb/gadget/function/u_audio.c
+++ b/drivers/usb/gadget/function/u_audio.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * u_audio.c -- interface to USB gadget "ALSA sound card" utilities
  *
@@ -9,16 +10,6 @@
  *    Copyright (C) 2011
  *    Yadwinder Singh (yadi.brar01@gmail.com)
  *    Jaswinder Singh (jaswinder.singh@linaro.org)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/gadget/function/u_audio.h b/drivers/usb/gadget/function/u_audio.h
index 07e13784cbb8..81d3d4ed6dfb 100644
--- a/drivers/usb/gadget/function/u_audio.h
+++ b/drivers/usb/gadget/function/u_audio.h
@@ -1,19 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * u_audio.h -- interface to USB gadget "ALSA sound card" utilities
  *
  * Copyright (C) 2016
  * Author: Ruslan Bilovol <ruslan.bilovol@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef __U_AUDIO_H
diff --git a/drivers/usb/gadget/function/u_ecm.h b/drivers/usb/gadget/function/u_ecm.h
index 262cc03cc2c0..050aa672ee7f 100644
--- a/drivers/usb/gadget/function/u_ecm.h
+++ b/drivers/usb/gadget/function/u_ecm.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * u_ecm.h
  *
@@ -7,10 +8,6 @@
  *		http://www.samsung.com
  *
  * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef U_ECM_H
diff --git a/drivers/usb/gadget/function/u_eem.h b/drivers/usb/gadget/function/u_eem.h
index e3ae97874c4f..de3828d3e8f0 100644
--- a/drivers/usb/gadget/function/u_eem.h
+++ b/drivers/usb/gadget/function/u_eem.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * u_eem.h
  *
@@ -7,10 +8,6 @@
  *		http://www.samsung.com
  *
  * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef U_EEM_H
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index bdbc3fdc7c4f..6fcda62f55ea 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * u_ether.c -- Ethernet-over-USB link layer utilities for Gadget stack
  *
  * Copyright (C) 2003-2005,2008 David Brownell
  * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
  * Copyright (C) 2008 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/function/u_ether.h b/drivers/usb/gadget/function/u_ether.h
index c77145bd6b5b..332307d54292 100644
--- a/drivers/usb/gadget/function/u_ether.h
+++ b/drivers/usb/gadget/function/u_ether.h
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * u_ether.h -- interface to USB gadget "ethernet link" utilities
  *
  * Copyright (C) 2003-2005,2008 David Brownell
  * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
  * Copyright (C) 2008 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #ifndef __U_ETHER_H
diff --git a/drivers/usb/gadget/function/u_ether_configfs.h b/drivers/usb/gadget/function/u_ether_configfs.h
index e4c3f84af4c3..cd33cee4d78b 100644
--- a/drivers/usb/gadget/function/u_ether_configfs.h
+++ b/drivers/usb/gadget/function/u_ether_configfs.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * u_ether_configfs.h
  *
@@ -7,10 +8,6 @@
  *		http://www.samsung.com
  *
  * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef __U_ETHER_CONFIGFS_H
diff --git a/drivers/usb/gadget/function/u_fs.h b/drivers/usb/gadget/function/u_fs.h
index 79f70ebf85dc..c3aba4dfa958 100644
--- a/drivers/usb/gadget/function/u_fs.h
+++ b/drivers/usb/gadget/function/u_fs.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * u_fs.h
  *
@@ -7,10 +8,6 @@
  *		http://www.samsung.com
  *
  * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef U_FFS_H
diff --git a/drivers/usb/gadget/function/u_gether.h b/drivers/usb/gadget/function/u_gether.h
index d4078426ba5d..5b7e2eb90336 100644
--- a/drivers/usb/gadget/function/u_gether.h
+++ b/drivers/usb/gadget/function/u_gether.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * u_gether.h
  *
@@ -7,10 +8,6 @@
  *		http://www.samsung.com
  *
  * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef U_GETHER_H
diff --git a/drivers/usb/gadget/function/u_hid.h b/drivers/usb/gadget/function/u_hid.h
index aaa0e368a159..2f5ca4bfa7ff 100644
--- a/drivers/usb/gadget/function/u_hid.h
+++ b/drivers/usb/gadget/function/u_hid.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * u_hid.h
  *
@@ -7,10 +8,6 @@
  *		http://www.samsung.com
  *
  * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef U_HID_H
diff --git a/drivers/usb/gadget/function/u_midi.h b/drivers/usb/gadget/function/u_midi.h
index 22510189758e..5599aa5fc977 100644
--- a/drivers/usb/gadget/function/u_midi.h
+++ b/drivers/usb/gadget/function/u_midi.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * u_midi.h
  *
@@ -7,10 +8,6 @@
  *		http://www.samsung.com
  *
  * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef U_MIDI_H
diff --git a/drivers/usb/gadget/function/u_ncm.h b/drivers/usb/gadget/function/u_ncm.h
index ce0f3a78ca13..67324f983343 100644
--- a/drivers/usb/gadget/function/u_ncm.h
+++ b/drivers/usb/gadget/function/u_ncm.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * u_ncm.h
  *
@@ -7,10 +8,6 @@
  *		http://www.samsung.com
  *
  * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef U_NCM_H
diff --git a/drivers/usb/gadget/function/u_phonet.h b/drivers/usb/gadget/function/u_phonet.h
index 98ced18779ea..12fb613f85d1 100644
--- a/drivers/usb/gadget/function/u_phonet.h
+++ b/drivers/usb/gadget/function/u_phonet.h
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * u_phonet.h - interface to Phonet
  *
  * Copyright (C) 2007-2008 by Nokia Corporation
- *
- * This software is distributed under the terms of the GNU General
- * Public License ("GPL") as published by the Free Software Foundation,
- * either version 2 of that License or (at your option) any later version.
  */
 
 #ifndef __U_PHONET_H
diff --git a/drivers/usb/gadget/function/u_printer.h b/drivers/usb/gadget/function/u_printer.h
index 8d30b7577f87..6088ff744194 100644
--- a/drivers/usb/gadget/function/u_printer.h
+++ b/drivers/usb/gadget/function/u_printer.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * u_printer.h
  *
@@ -7,10 +8,6 @@
  *		http://www.samsung.com
  *
  * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef U_PRINTER_H
diff --git a/drivers/usb/gadget/function/u_rndis.h b/drivers/usb/gadget/function/u_rndis.h
index efdb7ac381d9..d65fb4ebac3c 100644
--- a/drivers/usb/gadget/function/u_rndis.h
+++ b/drivers/usb/gadget/function/u_rndis.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * u_rndis.h
  *
@@ -7,10 +8,6 @@
  *		http://www.samsung.com
  *
  * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef U_RNDIS_H
diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
index 4176216d54be..4d653d2960d4 100644
--- a/drivers/usb/gadget/function/u_serial.c
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * u_serial.c - utilities for USB gadget "serial port"/TTY support
  *
@@ -9,10 +10,6 @@
  * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
  * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
  * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com)
- *
- * This software is distributed under the terms of the GNU General
- * Public License ("GPL") as published by the Free Software Foundation,
- * either version 2 of that License or (at your option) any later version.
  */
 
 /* #define VERBOSE_DEBUG */
@@ -1078,6 +1075,7 @@ static void gs_complete_out(struct usb_ep *ep, struct usb_request *req)
 	default:
 		pr_warn("%s: unexpected %s status %d\n",
 			__func__, ep->name, req->status);
+		/* fall through */
 	case 0:
 		/* normal completion */
 		spin_lock(&info->con_lock);
diff --git a/drivers/usb/gadget/function/u_serial.h b/drivers/usb/gadget/function/u_serial.h
index c20210c0babd..9acaac1cbb75 100644
--- a/drivers/usb/gadget/function/u_serial.h
+++ b/drivers/usb/gadget/function/u_serial.h
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * u_serial.h - interface to USB gadget "serial port"/TTY utilities
  *
  * Copyright (C) 2008 David Brownell
  * Copyright (C) 2008 by Nokia Corporation
- *
- * This software is distributed under the terms of the GNU General
- * Public License ("GPL") as published by the Free Software Foundation,
- * either version 2 of that License or (at your option) any later version.
  */
 
 #ifndef __U_SERIAL_H
diff --git a/drivers/usb/gadget/function/u_tcm.h b/drivers/usb/gadget/function/u_tcm.h
index 0bd751e0483f..3f7ccecb0f9b 100644
--- a/drivers/usb/gadget/function/u_tcm.h
+++ b/drivers/usb/gadget/function/u_tcm.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * u_tcm.h
  *
@@ -7,10 +8,6 @@
  *		http://www.samsung.com
  *
  * Author: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef U_TCM_H
diff --git a/drivers/usb/gadget/function/u_uac1.h b/drivers/usb/gadget/function/u_uac1.h
index 6f188fd8633f..6f1a9d73defe 100644
--- a/drivers/usb/gadget/function/u_uac1.h
+++ b/drivers/usb/gadget/function/u_uac1.h
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * u_uac1.h - Utility definitions for UAC1 function
  *
  * Copyright (C) 2016 Ruslan Bilovol <ruslan.bilovol@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef __U_UAC1_H
diff --git a/drivers/usb/gadget/function/u_uac1_legacy.c b/drivers/usb/gadget/function/u_uac1_legacy.c
index fa4684a1c54c..cbc868d117af 100644
--- a/drivers/usb/gadget/function/u_uac1_legacy.c
+++ b/drivers/usb/gadget/function/u_uac1_legacy.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * u_uac1.c -- ALSA audio utilities for Gadget stack
  *
@@ -5,8 +6,6 @@
  * Copyright (C) 2008 Analog Devices, Inc
  *
  * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/function/u_uac1_legacy.h b/drivers/usb/gadget/function/u_uac1_legacy.h
index d715b1af56a4..dd69e408a3d9 100644
--- a/drivers/usb/gadget/function/u_uac1_legacy.h
+++ b/drivers/usb/gadget/function/u_uac1_legacy.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * u_uac1.h -- interface to USB gadget "ALSA AUDIO" utilities
  *
@@ -5,8 +6,6 @@
  * Copyright (C) 2008 Analog Devices, Inc
  *
  * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
  */
 
 #ifndef __U_UAC1_LEGACY_H
diff --git a/drivers/usb/gadget/function/u_uac2.h b/drivers/usb/gadget/function/u_uac2.h
index 19eeb83538a5..8362ee572e1e 100644
--- a/drivers/usb/gadget/function/u_uac2.h
+++ b/drivers/usb/gadget/function/u_uac2.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * u_uac2.h
  *
@@ -7,10 +8,6 @@
  *		http://www.samsung.com
  *
  * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef U_UAC2_H
diff --git a/drivers/usb/gadget/function/u_uvc.h b/drivers/usb/gadget/function/u_uvc.h
index 4676b60a5063..d00d3ded71c0 100644
--- a/drivers/usb/gadget/function/u_uvc.h
+++ b/drivers/usb/gadget/function/u_uvc.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * u_uvc.h
  *
@@ -7,10 +8,6 @@
  *		http://www.samsung.com
  *
  * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef U_UVC_H
diff --git a/drivers/usb/gadget/function/uvc.h b/drivers/usb/gadget/function/uvc.h
index 11d70dead32b..a64e07e61f8c 100644
--- a/drivers/usb/gadget/function/uvc.h
+++ b/drivers/usb/gadget/function/uvc.h
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *	uvc_gadget.h  --  USB Video Class Gadget driver
  *
  *	Copyright (C) 2009-2010
  *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
  */
 
 #ifndef _UVC_GADGET_H_
diff --git a/drivers/usb/gadget/function/uvc_configfs.c b/drivers/usb/gadget/function/uvc_configfs.c
index 844cb738bafd..d2ad1442769a 100644
--- a/drivers/usb/gadget/function/uvc_configfs.c
+++ b/drivers/usb/gadget/function/uvc_configfs.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * uvc_configfs.c
  *
@@ -7,10 +8,6 @@
  *		http://www.samsung.com
  *
  * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include "u_uvc.h"
 #include "uvc_configfs.h"
diff --git a/drivers/usb/gadget/function/uvc_configfs.h b/drivers/usb/gadget/function/uvc_configfs.h
index 085e67be7c71..8549c0b27b9d 100644
--- a/drivers/usb/gadget/function/uvc_configfs.h
+++ b/drivers/usb/gadget/function/uvc_configfs.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * uvc_configfs.h
  *
@@ -7,10 +8,6 @@
  *		http://www.samsung.com
  *
  * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #ifndef UVC_CONFIGFS_H
 #define UVC_CONFIGFS_H
diff --git a/drivers/usb/gadget/function/uvc_queue.c b/drivers/usb/gadget/function/uvc_queue.c
index 6377e9fee6e5..278d50ff1eea 100644
--- a/drivers/usb/gadget/function/uvc_queue.c
+++ b/drivers/usb/gadget/function/uvc_queue.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *	uvc_queue.c  --  USB Video Class driver - Buffers management
  *
  *	Copyright (C) 2005-2010
  *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
  */
 
 #include <linux/atomic.h>
diff --git a/drivers/usb/gadget/function/uvc_v4l2.c b/drivers/usb/gadget/function/uvc_v4l2.c
index 3e22b45687d3..f3069db6f08e 100644
--- a/drivers/usb/gadget/function/uvc_v4l2.c
+++ b/drivers/usb/gadget/function/uvc_v4l2.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *	uvc_v4l2.c  --  USB Video Class Gadget driver
  *
  *	Copyright (C) 2009-2010
  *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
  */
 
 #include <linux/kernel.h>
@@ -354,7 +350,7 @@ static unsigned long uvcg_v4l2_get_unmapped_area(struct file *file,
 }
 #endif
 
-struct v4l2_file_operations uvc_v4l2_fops = {
+const struct v4l2_file_operations uvc_v4l2_fops = {
 	.owner		= THIS_MODULE,
 	.open		= uvc_v4l2_open,
 	.release	= uvc_v4l2_release,
diff --git a/drivers/usb/gadget/function/uvc_v4l2.h b/drivers/usb/gadget/function/uvc_v4l2.h
index 2683b92fda65..a75e9c397446 100644
--- a/drivers/usb/gadget/function/uvc_v4l2.h
+++ b/drivers/usb/gadget/function/uvc_v4l2.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *	uvc_v4l2.h  --  USB Video Class Gadget driver
  *
@@ -7,16 +8,12 @@
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *		Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef __UVC_V4L2_H__
 #define __UVC_V4L2_H__
 
 extern const struct v4l2_ioctl_ops uvc_v4l2_ioctl_ops;
-extern struct v4l2_file_operations uvc_v4l2_fops;
+extern const struct v4l2_file_operations uvc_v4l2_fops;
 
 #endif /* __UVC_V4L2_H__ */
diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c
index 0f01c04d7cbd..d3567b90343a 100644
--- a/drivers/usb/gadget/function/uvc_video.c
+++ b/drivers/usb/gadget/function/uvc_video.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *	uvc_video.c  --  USB Video Class Gadget driver
  *
  *	Copyright (C) 2009-2010
  *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/function/uvc_video.h b/drivers/usb/gadget/function/uvc_video.h
index ef00f06fa00b..6c20aa75f966 100644
--- a/drivers/usb/gadget/function/uvc_video.h
+++ b/drivers/usb/gadget/function/uvc_video.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *	uvc_video.h  --  USB Video Class Gadget driver
  *
@@ -7,10 +8,6 @@
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *		Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #ifndef __UVC_VIDEO_H__
 #define __UVC_VIDEO_H__
diff --git a/drivers/usb/gadget/functions.c b/drivers/usb/gadget/functions.c
index b13f839e7368..203361a64212 100644
--- a/drivers/usb/gadget/functions.c
+++ b/drivers/usb/gadget/functions.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/module.h>
diff --git a/drivers/usb/gadget/legacy/acm_ms.c b/drivers/usb/gadget/legacy/acm_ms.c
index c39de65a448b..af16672d5118 100644
--- a/drivers/usb/gadget/legacy/acm_ms.c
+++ b/drivers/usb/gadget/legacy/acm_ms.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * acm_ms.c -- Composite driver, with ACM and mass storage support
  *
@@ -7,11 +8,6 @@
  * Modified: Klaus Schwarzkopf <schwarzkopf@sensortherm.de>
  *
  * Heavily based on multi.c and cdc2.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/legacy/audio.c b/drivers/usb/gadget/legacy/audio.c
index 1f5cdbe162df..7b11dce98b94 100644
--- a/drivers/usb/gadget/legacy/audio.c
+++ b/drivers/usb/gadget/legacy/audio.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * audio.c -- Audio gadget driver
  *
@@ -5,8 +6,6 @@
  * Copyright (C) 2008 Analog Devices, Inc
  *
  * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/legacy/cdc2.c b/drivers/usb/gadget/legacy/cdc2.c
index 51c08682de84..da1c37933ca1 100644
--- a/drivers/usb/gadget/legacy/cdc2.c
+++ b/drivers/usb/gadget/legacy/cdc2.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * cdc2.c -- CDC Composite driver, with ECM and ACM support
  *
  * Copyright (C) 2008 David Brownell
  * Copyright (C) 2008 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/legacy/dbgp.c b/drivers/usb/gadget/legacy/dbgp.c
index 99ca3dabc4f3..e1d566c9918a 100644
--- a/drivers/usb/gadget/legacy/dbgp.c
+++ b/drivers/usb/gadget/legacy/dbgp.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * dbgp.c -- EHCI Debug Port device gadget
  *
diff --git a/drivers/usb/gadget/legacy/ether.c b/drivers/usb/gadget/legacy/ether.c
index 25a2c2e48592..30313b233680 100644
--- a/drivers/usb/gadget/legacy/ether.c
+++ b/drivers/usb/gadget/legacy/ether.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * ether.c -- Ethernet gadget driver, with CDC and non-CDC options
  *
  * Copyright (C) 2003-2005,2008 David Brownell
  * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
  * Copyright (C) 2008 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 /* #define VERBOSE_DEBUG */
diff --git a/drivers/usb/gadget/legacy/g_ffs.c b/drivers/usb/gadget/legacy/g_ffs.c
index 6da7316f8e87..b640ed3fcf70 100644
--- a/drivers/usb/gadget/legacy/g_ffs.c
+++ b/drivers/usb/gadget/legacy/g_ffs.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * g_ffs.c -- user mode file system API for USB composite function controllers
  *
  * Copyright (C) 2010 Samsung Electronics
  * Author: Michal Nazarewicz <mina86@mina86.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #define pr_fmt(fmt) "g_ffs: " fmt
diff --git a/drivers/usb/gadget/legacy/gmidi.c b/drivers/usb/gadget/legacy/gmidi.c
index 0bf39c3ccdb1..9eea2d18f2bf 100644
--- a/drivers/usb/gadget/legacy/gmidi.c
+++ b/drivers/usb/gadget/legacy/gmidi.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * gmidi.c -- USB MIDI Gadget Driver
  *
@@ -5,9 +6,6 @@
  * Developed for Thumtronics by Grey Innovation
  * Ben Williamson <ben.williamson@greyinnovation.com>
  *
- * This software is distributed under the terms of the GNU General Public
- * License ("GPL") version 2, as published by the Free Software Foundation.
- *
  * This code is based in part on:
  *
  * Gadget Zero driver, Copyright (C) 2003-2004 David Brownell.
diff --git a/drivers/usb/gadget/legacy/hid.c b/drivers/usb/gadget/legacy/hid.c
index a71a884f79fc..c4eda7fe7ab4 100644
--- a/drivers/usb/gadget/legacy/hid.c
+++ b/drivers/usb/gadget/legacy/hid.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * hid.c -- HID Composite driver
  *
  * Based on multi.c
  *
  * Copyright (C) 2010 Fabien Chouteau <fabien.chouteau@barco.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index 5c28bee327e1..9343ec436485 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * inode.c -- user mode filesystem api for usb gadget controllers
  *
  * Copyright (C) 2003-2004 David Brownell
  * Copyright (C) 2003 Agilent Technologies
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 
diff --git a/drivers/usb/gadget/legacy/mass_storage.c b/drivers/usb/gadget/legacy/mass_storage.c
index fcba59782f26..ef3d25259b0e 100644
--- a/drivers/usb/gadget/legacy/mass_storage.c
+++ b/drivers/usb/gadget/legacy/mass_storage.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * mass_storage.c -- Mass Storage USB Gadget
  *
@@ -5,11 +6,6 @@
  * Copyright (C) 2009 Samsung Electronics
  *                    Author: Michal Nazarewicz <mina86@mina86.com>
  * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 
diff --git a/drivers/usb/gadget/legacy/multi.c b/drivers/usb/gadget/legacy/multi.c
index a70a406580ea..50515f9e1022 100644
--- a/drivers/usb/gadget/legacy/multi.c
+++ b/drivers/usb/gadget/legacy/multi.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * multi.c -- Multifunction Composite driver
  *
@@ -5,11 +6,6 @@
  * Copyright (C) 2008 Nokia Corporation
  * Copyright (C) 2009 Samsung Electronics
  * Author: Michal Nazarewicz (mina86@mina86.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 
diff --git a/drivers/usb/gadget/legacy/ncm.c b/drivers/usb/gadget/legacy/ncm.c
index 0aba68253e3d..fcee1ee0bf66 100644
--- a/drivers/usb/gadget/legacy/ncm.c
+++ b/drivers/usb/gadget/legacy/ncm.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * ncm.c -- NCM gadget driver
  *
@@ -9,11 +10,6 @@
  * Copyright (C) 2003-2005,2008 David Brownell
  * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
  * Copyright (C) 2008 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 /* #define DEBUG */
diff --git a/drivers/usb/gadget/legacy/nokia.c b/drivers/usb/gadget/legacy/nokia.c
index b1e535f4022e..978c1a34a932 100644
--- a/drivers/usb/gadget/legacy/nokia.c
+++ b/drivers/usb/gadget/legacy/nokia.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * nokia.c -- Nokia Composite Gadget Driver
  *
@@ -9,10 +10,6 @@
  * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
  * Copyright (C) 2008 by David Brownell
  * Copyright (C) 2008 by Nokia Corporation
- *
- * This software is distributed under the terms of the GNU General
- * Public License ("GPL") as published by the Free Software Foundation,
- * version 2 of that License.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index 4c9cfff34a03..57858f0c2b6c 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * printer.c -- Printer gadget driver
  *
  * Copyright (C) 2003-2005 David Brownell
  * Copyright (C) 2006 Craig W. Nadler
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/gadget/legacy/serial.c b/drivers/usb/gadget/legacy/serial.c
index 9d89adce756d..de30d7628eef 100644
--- a/drivers/usb/gadget/legacy/serial.c
+++ b/drivers/usb/gadget/legacy/serial.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * serial.c -- USB gadget serial driver
  *
  * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
  * Copyright (C) 2008 by David Brownell
  * Copyright (C) 2008 by Nokia Corporation
- *
- * This software is distributed under the terms of the GNU General
- * Public License ("GPL") as published by the Free Software Foundation,
- * either version 2 of that License or (at your option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/legacy/tcm_usb_gadget.c b/drivers/usb/gadget/legacy/tcm_usb_gadget.c
index 0b0bb98319cd..682bf99dcf76 100644
--- a/drivers/usb/gadget/legacy/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/legacy/tcm_usb_gadget.c
@@ -1,10 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /* Target based USB-Gadget
  *
  * UAS protocol handling, target callbacks, configfs handling,
  * BBB (USB Mass Storage Class Bulk-Only (BBB) and Transport protocol handling.
  *
  * Author: Sebastian Andrzej Siewior <bigeasy at linutronix dot de>
- * License: GPLv2 as published by FSF.
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
diff --git a/drivers/usb/gadget/legacy/webcam.c b/drivers/usb/gadget/legacy/webcam.c
index 82c13fce9232..6b86568c9157 100644
--- a/drivers/usb/gadget/legacy/webcam.c
+++ b/drivers/usb/gadget/legacy/webcam.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *	webcam.c -- USB webcam gadget driver
  *
  *	Copyright (C) 2009-2010
  *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/legacy/zero.c b/drivers/usb/gadget/legacy/zero.c
index d02e2ce73ea5..6e84b44c8a3b 100644
--- a/drivers/usb/gadget/legacy/zero.c
+++ b/drivers/usb/gadget/legacy/zero.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * zero.c -- Gadget Zero, for USB development
  *
  * Copyright (C) 2003-2008 David Brownell
  * Copyright (C) 2008 by Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 /*
@@ -154,10 +150,11 @@ static struct usb_gadget_strings *dev_strings[] = {
 /*-------------------------------------------------------------------------*/
 
 static struct timer_list	autoresume_timer;
+static struct usb_composite_dev *autoresume_cdev;
 
-static void zero_autoresume(unsigned long _c)
+static void zero_autoresume(struct timer_list *unused)
 {
-	struct usb_composite_dev	*cdev = (void *)_c;
+	struct usb_composite_dev	*cdev = autoresume_cdev;
 	struct usb_gadget		*g = cdev->gadget;
 
 	/* unconfigured devices can't issue wakeups */
@@ -282,7 +279,8 @@ static int zero_bind(struct usb_composite_dev *cdev)
 	device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
 	device_desc.iSerialNumber = strings_dev[USB_GADGET_SERIAL_IDX].id;
 
-	setup_timer(&autoresume_timer, zero_autoresume, (unsigned long) cdev);
+	autoresume_cdev = cdev;
+	timer_setup(&autoresume_timer, zero_autoresume, 0);
 
 	func_inst_ss = usb_get_function_instance("SourceSink");
 	if (IS_ERR(func_inst_ss))
diff --git a/drivers/usb/gadget/u_f.c b/drivers/usb/gadget/u_f.c
index 18839732c840..dbaa46eee853 100644
--- a/drivers/usb/gadget/u_f.c
+++ b/drivers/usb/gadget/u_f.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * u_f.c -- USB function utilities for Gadget stack
  *
@@ -5,10 +6,6 @@
  *		http://www.samsung.com
  *
  * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include "u_f.h"
diff --git a/drivers/usb/gadget/u_f.h b/drivers/usb/gadget/u_f.h
index 7d53a4773d1a..c3fbef2bb5db 100644
--- a/drivers/usb/gadget/u_f.h
+++ b/drivers/usb/gadget/u_f.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * u_f.h
  *
@@ -7,10 +8,6 @@
  *		http://www.samsung.com
  *
  * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef __U_F_H__
diff --git a/drivers/usb/gadget/u_os_desc.h b/drivers/usb/gadget/u_os_desc.h
index 947b7ddff691..8acd21779ac8 100644
--- a/drivers/usb/gadget/u_os_desc.h
+++ b/drivers/usb/gadget/u_os_desc.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * u_os_desc.h
  *
@@ -7,10 +8,6 @@
  *		http://www.samsung.com
  *
  * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef __U_OS_DESC_H__
diff --git a/drivers/usb/gadget/udc/amd5536udc.h b/drivers/usb/gadget/udc/amd5536udc.h
index 4fe22d432af2..dfdef6a28904 100644
--- a/drivers/usb/gadget/udc/amd5536udc.h
+++ b/drivers/usb/gadget/udc/amd5536udc.h
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * amd5536.h -- header for AMD 5536 UDC high/full speed USB device controller
  *
  * Copyright (C) 2007 AMD (http://www.amd.com)
  * Author: Thomas Dahlmann
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #ifndef AMD5536UDC_H
diff --git a/drivers/usb/gadget/udc/amd5536udc_pci.c b/drivers/usb/gadget/udc/amd5536udc_pci.c
index 57a13f080a79..57b6f66331cf 100644
--- a/drivers/usb/gadget/udc/amd5536udc_pci.c
+++ b/drivers/usb/gadget/udc/amd5536udc_pci.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * amd5536udc_pci.c -- AMD 5536 UDC high/full speed USB device controller
  *
  * Copyright (C) 2005-2007 AMD (http://www.amd.com)
  * Author: Thomas Dahlmann
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 /*
diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c
index 8bc78418d40e..bfe278294e88 100644
--- a/drivers/usb/gadget/udc/at91_udc.c
+++ b/drivers/usb/gadget/udc/at91_udc.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * at91_udc -- driver for at91-series USB peripheral controller
  *
  * Copyright (C) 2004 by Thomas Rathbone
  * Copyright (C) 2005 by HP Labs
  * Copyright (C) 2005 by David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #undef	VERBOSE_DEBUG
diff --git a/drivers/usb/gadget/udc/at91_udc.h b/drivers/usb/gadget/udc/at91_udc.h
index 9bbe72764f31..fd58c5b81826 100644
--- a/drivers/usb/gadget/udc/at91_udc.h
+++ b/drivers/usb/gadget/udc/at91_udc.h
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2004 by Thomas Rathbone, HP Labs
  * Copyright (C) 2005 by Ivan Kokshaysky
  * Copyright (C) 2006 by SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #ifndef AT91_UDC_H
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index a884c022df7a..075eaaa8a408 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for the Atmel USBA high speed USB device controller
  *
  * Copyright (C) 2005-2007 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include <linux/clk.h>
 #include <linux/clk/at91_pmc.h>
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h
index f8ebe0389bd4..860a00a6fdd0 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.h
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.h
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for the Atmel USBA high speed USB device controller
  *
  * Copyright (C) 2005-2007 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #ifndef __LINUX_USB_GADGET_USBA_UDC_H__
 #define __LINUX_USB_GADGET_USBA_UDC_H__
diff --git a/drivers/usb/gadget/udc/bcm63xx_udc.c b/drivers/usb/gadget/udc/bcm63xx_udc.c
index f78503203f42..29f254793592 100644
--- a/drivers/usb/gadget/udc/bcm63xx_udc.c
+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * bcm63xx_udc.c -- BCM63xx UDC high/full speed USB device controller
  *
  * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
  * Copyright (C) 2012 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/bitops.h>
diff --git a/drivers/usb/gadget/udc/bdc/bdc.h b/drivers/usb/gadget/udc/bdc/bdc.h
index 6df0352cdc50..6e1e881dc51e 100644
--- a/drivers/usb/gadget/udc/bdc/bdc.h
+++ b/drivers/usb/gadget/udc/bdc/bdc.h
@@ -1,15 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * bdc.h - header for the BRCM BDC USB3.0 device controller
  *
  * Copyright (C) 2014 Broadcom Corporation
  *
  * Author: Ashwini Pahuja
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
  */
 
 #ifndef	__LINUX_BDC_H__
diff --git a/drivers/usb/gadget/udc/bdc/bdc_cmd.c b/drivers/usb/gadget/udc/bdc/bdc_cmd.c
index 6e920f1dce02..6305bf2c8b59 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_cmd.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_cmd.c
@@ -1,15 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * bdc_cmd.c - BRCM BDC USB3.0 device controller
  *
  * Copyright (C) 2014 Broadcom Corporation
  *
  * Author: Ashwini Pahuja
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
  */
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
diff --git a/drivers/usb/gadget/udc/bdc/bdc_cmd.h b/drivers/usb/gadget/udc/bdc/bdc_cmd.h
index 61d0e3bf9853..29cc988a671a 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_cmd.h
+++ b/drivers/usb/gadget/udc/bdc/bdc_cmd.h
@@ -1,15 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * bdc_cmd.h - header for the BDC debug functions
  *
  * Copyright (C) 2014 Broadcom Corporation
  *
  * Author: Ashwini Pahuja
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
  */
 #ifndef __LINUX_BDC_CMD_H__
 #define __LINUX_BDC_CMD_H__
diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index 7a8af4b916cf..d39f070acbd7 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -1,15 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * bdc_core.c - BRCM BDC USB3.0 device controller core operations
  *
  * Copyright (C) 2014 Broadcom Corporation
  *
  * Author: Ashwini Pahuja
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/udc/bdc/bdc_dbg.c b/drivers/usb/gadget/udc/bdc/bdc_dbg.c
index ac98f6f681b7..7ba7448ad743 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_dbg.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_dbg.c
@@ -1,15 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * bdc_dbg.c - BRCM BDC USB3.0 device controller debug functions
  *
  * Copyright (C) 2014 Broadcom Corporation
  *
  * Author: Ashwini Pahuja
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
  */
 
 #include "bdc.h"
diff --git a/drivers/usb/gadget/udc/bdc/bdc_dbg.h b/drivers/usb/gadget/udc/bdc/bdc_dbg.h
index 338a6c701315..373d5abffbb8 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_dbg.h
+++ b/drivers/usb/gadget/udc/bdc/bdc_dbg.h
@@ -1,15 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * bdc_dbg.h - header for the BDC debug functions
  *
  * Copyright (C) 2014 Broadcom Corporation
  *
  * Author: Ashwini Pahuja
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
  */
 #ifndef __LINUX_BDC_DBG_H__
 #define __LINUX_BDC_DBG_H__
diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c
index bfd8f7ade935..f40d4c13cfa4 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_ep.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * bdc_ep.c - BRCM BDC USB3.0 device controller endpoint related functions
  *
@@ -6,12 +7,6 @@
  * Author: Ashwini Pahuja
  *
  * Based on drivers under drivers/usb/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
  */
 #include <linux/module.h>
 #include <linux/pci.h>
diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.h b/drivers/usb/gadget/udc/bdc/bdc_ep.h
index 8a6b36cbf2ea..a37ff8033b4f 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_ep.h
+++ b/drivers/usb/gadget/udc/bdc/bdc_ep.h
@@ -1,15 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * bdc_ep.h - header for the BDC debug functions
  *
  * Copyright (C) 2014 Broadcom Corporation
  *
  * Author: Ashwini Pahuja
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
  */
 #ifndef __LINUX_BDC_EP_H__
 #define __LINUX_BDC_EP_H__
diff --git a/drivers/usb/gadget/udc/bdc/bdc_pci.c b/drivers/usb/gadget/udc/bdc/bdc_pci.c
index 02968842b359..1e940f054cb8 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_pci.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_pci.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * bdc_pci.c - BRCM BDC USB3.0 device controller PCI interface file.
  *
@@ -6,12 +7,6 @@
  * Author: Ashwini Pahuja
  *
  * Based on drivers under drivers/usb/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/udc/bdc/bdc_udc.c b/drivers/usb/gadget/udc/bdc/bdc_udc.c
index c84346146456..7bfd58c846f7 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_udc.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_udc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * bdc_udc.c - BRCM BDC USB3.0 device controller gagdet ops
  *
@@ -6,12 +7,6 @@
  * Author: Ashwini Pahuja
  *
  * Based on drivers under drivers/usb/gadget/udc/
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
  */
 #include <linux/module.h>
 #include <linux/pci.h>
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index d41d07aae0ce..61422d624ad0 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * udc.c - Core UDC Framework
  *
  * Copyright (C) 2010 Texas Instruments
  * Author: Felipe Balbi <balbi@ti.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 #include <linux/kernel.h>
@@ -912,7 +901,7 @@ int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
 		return 0;
 
 	type = usb_endpoint_type(desc);
-	max = 0x7ff & usb_endpoint_maxp(desc);
+	max = usb_endpoint_maxp(desc);
 
 	if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
 		return 0;
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index f04e91ef9e7c..4f1b1809472c 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * dummy_hcd.c -- Dummy/Loopback USB host and device emulator driver.
  *
@@ -5,11 +6,6 @@
  *
  * Copyright (C) 2003 David Brownell
  * Copyright (C) 2003-2005 Alan Stern
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 
@@ -23,6 +19,8 @@
  *
  * Having this all in one kernel can help some stages of development,
  * bypassing some hardware (and driver) issues.  UML could help too.
+ *
+ * Note: The emulation does not include isochronous transfers!
  */
 
 #include <linux/module.h>
@@ -137,6 +135,9 @@ static const struct {
 		.caps = _caps, \
 	}
 
+/* we don't provide isochronous endpoints since we don't support them */
+#define TYPE_BULK_OR_INT	(USB_EP_CAPS_TYPE_BULK | USB_EP_CAPS_TYPE_INT)
+
 	/* everyone has ep0 */
 	EP_INFO(ep0name,
 		USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)),
@@ -145,64 +146,72 @@ static const struct {
 		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
 	EP_INFO("ep2out-bulk",
 		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+/*
 	EP_INFO("ep3in-iso",
 		USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)),
 	EP_INFO("ep4out-iso",
 		USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)),
+*/
 	EP_INFO("ep5in-int",
 		USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
 	EP_INFO("ep6in-bulk",
 		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
 	EP_INFO("ep7out-bulk",
 		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+/*
 	EP_INFO("ep8in-iso",
 		USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)),
 	EP_INFO("ep9out-iso",
 		USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)),
+*/
 	EP_INFO("ep10in-int",
 		USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
 	EP_INFO("ep11in-bulk",
 		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
 	EP_INFO("ep12out-bulk",
 		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
+/*
 	EP_INFO("ep13in-iso",
 		USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)),
 	EP_INFO("ep14out-iso",
 		USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)),
+*/
 	EP_INFO("ep15in-int",
 		USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
+
 	/* or like sa1100: two fixed function endpoints */
 	EP_INFO("ep1out-bulk",
 		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
 	EP_INFO("ep2in-bulk",
 		USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
+
 	/* and now some generic EPs so we have enough in multi config */
 	EP_INFO("ep3out",
-		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_OUT)),
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
 	EP_INFO("ep4in",
-		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_IN)),
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
 	EP_INFO("ep5out",
-		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_OUT)),
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
 	EP_INFO("ep6out",
-		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_OUT)),
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
 	EP_INFO("ep7in",
-		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_IN)),
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
 	EP_INFO("ep8out",
-		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_OUT)),
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
 	EP_INFO("ep9in",
-		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_IN)),
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
 	EP_INFO("ep10out",
-		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_OUT)),
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
 	EP_INFO("ep11out",
-		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_OUT)),
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
 	EP_INFO("ep12in",
-		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_IN)),
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
 	EP_INFO("ep13out",
-		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_OUT)),
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
 	EP_INFO("ep14in",
-		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_IN)),
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
 	EP_INFO("ep15out",
-		USB_EP_CAPS(USB_EP_CAPS_TYPE_ALL, USB_EP_CAPS_DIR_OUT)),
+		USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
 
 #undef EP_INFO
 };
@@ -556,10 +565,12 @@ static int dummy_enable(struct usb_ep *_ep,
 			if (max <= 1024)
 				break;
 			/* save a return statement */
+			/* fall through */
 		case USB_SPEED_FULL:
 			if (max <= 64)
 				break;
 			/* save a return statement */
+			/* fall through */
 		default:
 			if (max <= 8)
 				break;
@@ -577,6 +588,7 @@ static int dummy_enable(struct usb_ep *_ep,
 			if (max <= 1024)
 				break;
 			/* save a return statement */
+			/* fall through */
 		case USB_SPEED_FULL:
 			if (max <= 1023)
 				break;
@@ -1769,6 +1781,7 @@ static void dummy_timer(unsigned long _dum_hcd)
 	int			i;
 
 	/* simplistic model for one frame's bandwidth */
+	/* FIXME: account for transaction and packet overhead */
 	switch (dum->gadget.speed) {
 	case USB_SPEED_LOW:
 		total = 8/*bytes*/ * 12/*packets*/;
@@ -1813,7 +1826,6 @@ restart:
 		struct dummy_request	*req;
 		u8			address;
 		struct dummy_ep		*ep = NULL;
-		int			type;
 		int			status = -EINPROGRESS;
 
 		/* stop when we reach URBs queued after the timer interrupt */
@@ -1825,14 +1837,10 @@ restart:
 			goto return_urb;
 		else if (dum_hcd->rh_state != DUMMY_RH_RUNNING)
 			continue;
-		type = usb_pipetype(urb->pipe);
 
-		/* used up this frame's non-periodic bandwidth?
-		 * FIXME there's infinite bandwidth for control and
-		 * periodic transfers ... unrealistic.
-		 */
-		if (total <= 0 && type == PIPE_BULK)
-			continue;
+		/* Used up this frame's bandwidth? */
+		if (total <= 0)
+			break;
 
 		/* find the gadget's ep for this request (if configured) */
 		address = usb_pipeendpoint (urb->pipe);
@@ -1930,13 +1938,17 @@ restart:
 		limit = total;
 		switch (usb_pipetype(urb->pipe)) {
 		case PIPE_ISOCHRONOUS:
-			/* FIXME is it urb->interval since the last xfer?
-			 * use urb->iso_frame_desc[i].
-			 * complete whether or not ep has requests queued.
-			 * report random errors, to debug drivers.
+			/*
+			 * We don't support isochronous.  But if we did,
+			 * here are some of the issues we'd have to face:
+			 *
+			 * Is it urb->interval since the last xfer?
+			 * Use urb->iso_frame_desc[i].
+			 * Complete whether or not ep has requests queued.
+			 * Report random errors, to debug drivers.
 			 */
 			limit = max(limit, periodic_bytes(dum, ep));
-			status = -ENOSYS;
+			status = -EINVAL;	/* fail all xfers */
 			break;
 
 		case PIPE_INTERRUPT:
@@ -2433,9 +2445,7 @@ static DEVICE_ATTR_RO(urbs);
 
 static int dummy_start_ss(struct dummy_hcd *dum_hcd)
 {
-	init_timer(&dum_hcd->timer);
-	dum_hcd->timer.function = dummy_timer;
-	dum_hcd->timer.data = (unsigned long)dum_hcd;
+	setup_timer(&dum_hcd->timer, dummy_timer, (unsigned long)dum_hcd);
 	dum_hcd->rh_state = DUMMY_RH_RUNNING;
 	dum_hcd->stream_en_ep = 0;
 	INIT_LIST_HEAD(&dum_hcd->urbp_list);
@@ -2464,9 +2474,7 @@ static int dummy_start(struct usb_hcd *hcd)
 		return dummy_start_ss(dum_hcd);
 
 	spin_lock_init(&dum_hcd->dum->lock);
-	init_timer(&dum_hcd->timer);
-	dum_hcd->timer.function = dummy_timer;
-	dum_hcd->timer.data = (unsigned long)dum_hcd;
+	setup_timer(&dum_hcd->timer, dummy_timer, (unsigned long)dum_hcd);
 	dum_hcd->rh_state = DUMMY_RH_RUNNING;
 
 	INIT_LIST_HEAD(&dum_hcd->urbp_list);
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index 78d0204e3e20..53a48f561458 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * FOTG210 UDC Driver supports Bulk transfer so far
  *
  * Copyright (C) 2013 Faraday Technology Corporation
  *
  * Author : Yuan-Hsin Chen <yhchen@faraday-tech.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
  */
 
 #include <linux/dma-mapping.h>
diff --git a/drivers/usb/gadget/udc/fotg210.h b/drivers/usb/gadget/udc/fotg210.h
index bbf991bcbe7c..08c32957503b 100644
--- a/drivers/usb/gadget/udc/fotg210.h
+++ b/drivers/usb/gadget/udc/fotg210.h
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Faraday FOTG210 USB OTG controller
  *
  * Copyright (C) 2013 Faraday Technology Corporation
  * Author: Yuan-Hsin Chen <yhchen@faraday-tech.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/udc/fsl_mxc_udc.c b/drivers/usb/gadget/udc/fsl_mxc_udc.c
index f16e149c5b3e..f29cf5c6160c 100644
--- a/drivers/usb/gadget/udc/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/udc/fsl_mxc_udc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2009
  * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
@@ -5,11 +6,6 @@
  * Description:
  * Helper routines for i.MX3x SoCs from Freescale, needed by the fsl_usb2_udc.c
  * driver to function correctly on these systems.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 #include <linux/clk.h>
 #include <linux/delay.h>
diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c
index a3e72d690eef..2707be628298 100644
--- a/drivers/usb/gadget/udc/fsl_qe_udc.c
+++ b/drivers/usb/gadget/udc/fsl_qe_udc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * driver/usb/gadget/fsl_qe_udc.c
  *
@@ -11,11 +12,6 @@
  * Freescle QE/CPM USB Pheripheral Controller Driver
  * The controller can be found on MPC8360, MPC8272, and etc.
  * MPC8360 Rev 1.1 may need QE mircocode update
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation;  either version 2 of the License, or (at your
- * option) any later version.
  */
 
 #undef USB_TRACE
diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.h b/drivers/usb/gadget/udc/fsl_qe_udc.h
index 7026919fc901..2c537a904ee7 100644
--- a/drivers/usb/gadget/udc/fsl_qe_udc.h
+++ b/drivers/usb/gadget/udc/fsl_qe_udc.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * drivers/usb/gadget/qe_udc.h
  *
@@ -8,11 +9,6 @@
  *
  * Description:
  * Freescale USB device/endpoint management registers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
  */
 
 #ifndef __FSL_QE_UDC_H
diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c
index 6f2f71c054be..d606d4f13098 100644
--- a/drivers/usb/gadget/udc/fsl_udc_core.c
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2004-2007,2011-2012 Freescale Semiconductor, Inc.
  * All rights reserved.
@@ -10,11 +11,6 @@
  * This can be found on MPC8349E/MPC8313E/MPC5121E cpus.
  * The driver is previously named as mpc_udc.  Based on bare board
  * code from Dave Liu and Shlomi Gridish.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #undef VERBOSE
diff --git a/drivers/usb/gadget/udc/fsl_usb2_udc.h b/drivers/usb/gadget/udc/fsl_usb2_udc.h
index e92b8408b6f6..4ba651ae9048 100644
--- a/drivers/usb/gadget/udc/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/udc/fsl_usb2_udc.h
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2004,2012 Freescale Semiconductor, Inc
  * All rights reserved.
  *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  * Freescale USB device/endpoint management registers
  */
 #ifndef __FSL_USB2_UDC_H
diff --git a/drivers/usb/gadget/udc/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c
index e0c1b0099265..263804d154a7 100644
--- a/drivers/usb/gadget/udc/fusb300_udc.c
+++ b/drivers/usb/gadget/udc/fusb300_udc.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Fusb300 UDC (USB gadget)
  *
  * Copyright (C) 2010 Faraday Technology Corp.
  *
  * Author : Yuan-hsin Chen <yhchen@faraday-tech.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
  */
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
diff --git a/drivers/usb/gadget/udc/fusb300_udc.h b/drivers/usb/gadget/udc/fusb300_udc.h
index ad39f892d200..eb3d6d379ba7 100644
--- a/drivers/usb/gadget/udc/fusb300_udc.h
+++ b/drivers/usb/gadget/udc/fusb300_udc.h
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Fusb300 UDC (USB gadget)
  *
  * Copyright (C) 2010 Faraday Technology Corp.
  *
  * Author : Yuan-hsin Chen <yhchen@faraday-tech.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
  */
 
 
diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c
index 8433c22900dc..4504d0b202db 100644
--- a/drivers/usb/gadget/udc/goku_udc.c
+++ b/drivers/usb/gadget/udc/goku_udc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Toshiba TC86C001 ("Goku-S") USB Device Controller driver
  *
@@ -5,10 +6,6 @@
  *      by Stuart Lynne, Tom Rushworth, and Bruce Balden
  * Copyright (C) 2002 Toshiba Corporation
  * Copyright (C) 2003 MontaVista Software (source@mvista.com)
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /*
@@ -127,11 +124,15 @@ goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	mode = 0;
 	max = get_unaligned_le16(&desc->wMaxPacketSize);
 	switch (max) {
-	case 64:	mode++;
-	case 32:	mode++;
-	case 16:	mode++;
-	case 8:		mode <<= 3;
-			break;
+	case 64:
+		mode++; /* fall through */
+	case 32:
+		mode++; /* fall through */
+	case 16:
+		mode++; /* fall through */
+	case 8:
+		mode <<= 3;
+		break;
 	default:
 		return -EINVAL;
 	}
diff --git a/drivers/usb/gadget/udc/goku_udc.h b/drivers/usb/gadget/udc/goku_udc.h
index 86d2adafe149..26601bf4e7a9 100644
--- a/drivers/usb/gadget/udc/goku_udc.h
+++ b/drivers/usb/gadget/udc/goku_udc.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Toshiba TC86C001 ("Goku-S") USB Device Controller driver
  *
@@ -5,10 +6,6 @@
  *      by Stuart Lynne, Tom Rushworth, and Bruce Balden
  * Copyright (C) 2002 Toshiba Corporation
  * Copyright (C) 2003 MontaVista Software (source@mvista.com)
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /*
diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
index 0b59fa50aa30..b3fb1bbdb854 100644
--- a/drivers/usb/gadget/udc/gr_udc.c
+++ b/drivers/usb/gadget/udc/gr_udc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * USB Peripheral Controller driver for Aeroflex Gaisler GRUSBDC.
  *
@@ -9,11 +10,6 @@
  * Full documentation of the GRUSBDC core can be found here:
  * http://www.gaisler.com/products/grlib/grip.pdf
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
  * Contributors:
  * - Andreas Larsson <andreas@gaisler.com>
  * - Marko Isomaki
@@ -1538,7 +1534,7 @@ static int gr_ep_enable(struct usb_ep *_ep,
 	 * Bits 10-0 set the max payload. 12-11 set the number of
 	 * additional transactions.
 	 */
-	max = 0x7ff & usb_endpoint_maxp(desc);
+	max = usb_endpoint_maxp(desc);
 	nt = usb_endpoint_maxp_mult(desc) - 1;
 	buffer_size = GR_BUFFER_SIZE(epctrl);
 	if (nt && (mode == 0 || mode == 2)) {
diff --git a/drivers/usb/gadget/udc/gr_udc.h b/drivers/usb/gadget/udc/gr_udc.h
index 4297c4e8021f..3e913268c8c5 100644
--- a/drivers/usb/gadget/udc/gr_udc.h
+++ b/drivers/usb/gadget/udc/gr_udc.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * USB Peripheral Controller driver for Aeroflex Gaisler GRUSBDC.
  *
@@ -9,11 +10,6 @@
  * Full documentation of the GRUSBDC core can be found here:
  * http://www.gaisler.com/products/grlib/grip.pdf
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
  * Contributors:
  * - Andreas Larsson <andreas@gaisler.com>
  * - Marko Isomaki
diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index 8f32b5ee7734..b0781771704e 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * USB Gadget driver for LPC32xx
  *
@@ -12,20 +13,6 @@
  *
  * Note: This driver is based on original work done by Mike James for
  *       the LPC3180.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/clk.h>
diff --git a/drivers/usb/gadget/udc/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c
index 46ce7bc15f2b..f19e6282a688 100644
--- a/drivers/usb/gadget/udc/m66592-udc.c
+++ b/drivers/usb/gadget/udc/m66592-udc.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * M66592 UDC (USB gadget)
  *
  * Copyright (C) 2006-2007 Renesas Solutions Corp.
  *
  * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
  */
 
 #include <linux/module.h>
@@ -1592,9 +1589,7 @@ static int m66592_probe(struct platform_device *pdev)
 	m66592->gadget.max_speed = USB_SPEED_HIGH;
 	m66592->gadget.name = udc_name;
 
-	init_timer(&m66592->timer);
-	m66592->timer.function = m66592_timer;
-	m66592->timer.data = (unsigned long)m66592;
+	setup_timer(&m66592->timer, m66592_timer, (unsigned long)m66592);
 	m66592->reg = reg;
 
 	ret = request_irq(ires->start, m66592_irq, IRQF_SHARED,
diff --git a/drivers/usb/gadget/udc/m66592-udc.h b/drivers/usb/gadget/udc/m66592-udc.h
index 96d49d7bfb6b..01a64685b8a3 100644
--- a/drivers/usb/gadget/udc/m66592-udc.h
+++ b/drivers/usb/gadget/udc/m66592-udc.h
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * M66592 UDC (USB gadget)
  *
  * Copyright (C) 2006-2007 Renesas Solutions Corp.
  *
  * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
  */
 
 #ifndef __M66592_UDC_H__
diff --git a/drivers/usb/gadget/udc/mv_u3d.h b/drivers/usb/gadget/udc/mv_u3d.h
index e32a787ac373..982625b7197a 100644
--- a/drivers/usb/gadget/udc/mv_u3d.h
+++ b/drivers/usb/gadget/udc/mv_u3d.h
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
  */
 
 #ifndef __MV_U3D_H
diff --git a/drivers/usb/gadget/udc/mv_u3d_core.c b/drivers/usb/gadget/udc/mv_u3d_core.c
index 772049afe166..35e02a8d0091 100644
--- a/drivers/usb/gadget/udc/mv_u3d_core.c
+++ b/drivers/usb/gadget/udc/mv_u3d_core.c
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/gadget/udc/mv_udc.h b/drivers/usb/gadget/udc/mv_udc.h
index be77f207dbaf..b3f759c0962c 100644
--- a/drivers/usb/gadget/udc/mv_udc.h
+++ b/drivers/usb/gadget/udc/mv_udc.h
@@ -1,10 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #ifndef __MV_UDC_H
diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c
index 4103bf7cf52a..95f52232493b 100644
--- a/drivers/usb/gadget/udc/mv_udc_core.c
+++ b/drivers/usb/gadget/udc/mv_udc_core.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
  * Author: Chao Xie <chao.xie@marvell.com>
  *	   Neil Zhang <zhangwm@marvell.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c
index 8f85a51bd2b3..660878a19505 100644
--- a/drivers/usb/gadget/udc/net2272.c
+++ b/drivers/usb/gadget/udc/net2272.c
@@ -1,22 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for PLX NET2272 USB device controller
  *
  * Copyright (C) 2005-2006 PLX Technology, Inc.
  * Copyright (C) 2006-2011 Analog Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/delay.h>
diff --git a/drivers/usb/gadget/udc/net2272.h b/drivers/usb/gadget/udc/net2272.h
index 69bc9c3c6ce4..8e644627992d 100644
--- a/drivers/usb/gadget/udc/net2272.h
+++ b/drivers/usb/gadget/udc/net2272.h
@@ -1,22 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * PLX NET2272 high/full speed USB device controller
  *
  * Copyright (C) 2005-2006 PLX Technology, Inc.
  * Copyright (C) 2006-2011 Analog Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __NET2272_H__
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index f608c1f85e61..318246d8b2e2 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for the PLX NET2280 USB device controller.
  * Specs and errata are available from <http://www.plxtech.com>.
@@ -31,11 +32,6 @@
  *
  * Modified Ricardo Ribalda Qtechnology AS  to provide compatibility
  *	with usb 338x chip. Based on PLX driver
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/gadget/udc/net2280.h b/drivers/usb/gadget/udc/net2280.h
index 1088c3745999..b65a797544d7 100644
--- a/drivers/usb/gadget/udc/net2280.h
+++ b/drivers/usb/gadget/udc/net2280.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * NetChip 2280 high/full speed USB device controller.
  * Unlike many such controllers, this one talks PCI.
@@ -7,11 +8,6 @@
  * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
  * Copyright (C) 2003 David Brownell
  * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/usb/net2280.h>
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index f05ba6825bfe..fc7f810baef7 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * omap_udc.c -- for OMAP full speed udc; most chips support OTG.
  *
@@ -5,11 +6,6 @@
  * Copyright (C) 2004-2005 David Brownell
  *
  * OMAP2 & DMA support by Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #undef	DEBUG
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index 84dcbcd756f0..afaea11ec771 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
  */
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c
index a238da906115..8f135d9fa245 100644
--- a/drivers/usb/gadget/udc/pxa25x_udc.c
+++ b/drivers/usb/gadget/udc/pxa25x_udc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Intel PXA25x and IXP4xx on-chip full speed USB device controllers
  *
@@ -6,11 +7,6 @@
  * Copyright (C) 2003 Benedikt Spranger, Pengutronix
  * Copyright (C) 2003 David Brownell
  * Copyright (C) 2003 Joshua Wise
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 /* #define VERBOSE_DEBUG */
@@ -2417,9 +2413,7 @@ static int pxa25x_udc_probe(struct platform_device *pdev)
 		gpio_direction_output(dev->mach->gpio_pullup, 0);
 	}
 
-	init_timer(&dev->timer);
-	dev->timer.function = udc_watchdog;
-	dev->timer.data = (unsigned long) dev;
+	setup_timer(&dev->timer, udc_watchdog, (unsigned long)dev);
 
 	the_controller = dev;
 	platform_set_drvdata(pdev, dev);
diff --git a/drivers/usb/gadget/udc/pxa25x_udc.h b/drivers/usb/gadget/udc/pxa25x_udc.h
index a458bec2536d..ccc6b921f067 100644
--- a/drivers/usb/gadget/udc/pxa25x_udc.h
+++ b/drivers/usb/gadget/udc/pxa25x_udc.h
@@ -1,14 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Intel PXA25x on-chip full speed USB device controller
  *
  * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
  * Copyright (C) 2003 David Brownell
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #ifndef __LINUX_USB_GADGET_PXA25X_H
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
index d48e239660c3..be2761f1b3f5 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Handles the Intel 27x USB Device Controller (UDC)
  *
  * Inspired by original driver by Frank Becker, David Brownell, and others.
  * Copyright (C) 2008 Robert Jarzmik
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.h b/drivers/usb/gadget/udc/pxa27x_udc.h
index cea2cb79b30c..1128d39a4255 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.h
+++ b/drivers/usb/gadget/udc/pxa27x_udc.h
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * linux/drivers/usb/gadget/pxa27x_udc.h
  * Intel PXA27x on-chip full speed USB device controller
  *
  * Inspired by original driver by Frank Becker, David Brownell, and others.
  * Copyright (C) 2008 Robert Jarzmik
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #ifndef __LINUX_USB_GADGET_PXA27X_H
diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c
index 118ad70f1af0..143122ed3c66 100644
--- a/drivers/usb/gadget/udc/r8a66597-udc.c
+++ b/drivers/usb/gadget/udc/r8a66597-udc.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * R8A66597 UDC (USB gadget)
  *
  * Copyright (C) 2006-2009 Renesas Solutions Corp.
  *
  * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
  */
 
 #include <linux/module.h>
@@ -1877,9 +1874,7 @@ static int r8a66597_probe(struct platform_device *pdev)
 	r8a66597->gadget.max_speed = USB_SPEED_HIGH;
 	r8a66597->gadget.name = udc_name;
 
-	init_timer(&r8a66597->timer);
-	r8a66597->timer.function = r8a66597_timer;
-	r8a66597->timer.data = (unsigned long)r8a66597;
+	setup_timer(&r8a66597->timer, r8a66597_timer, (unsigned long)r8a66597);
 	r8a66597->reg = reg;
 
 	if (r8a66597->pdata->on_chip) {
diff --git a/drivers/usb/gadget/udc/r8a66597-udc.h b/drivers/usb/gadget/udc/r8a66597-udc.h
index 45c4b2df1785..9a115caba661 100644
--- a/drivers/usb/gadget/udc/r8a66597-udc.h
+++ b/drivers/usb/gadget/udc/r8a66597-udc.h
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * R8A66597 UDC
  *
  * Copyright (C) 2007-2009 Renesas Solutions Corp.
  *
  * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
  */
 
 #ifndef __R8A66597_H__
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
index 63a206122058..bc37f40baacf 100644
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -1,22 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Renesas USB3.0 Peripheral driver (USB gadget)
  *
- * Copyright (C) 2015  Renesas Electronics Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * Copyright (C) 2015-2017  Renesas Electronics Corporation
  */
 
 #include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/sizes.h>
@@ -334,6 +332,7 @@ struct renesas_usb3 {
 	struct usb_gadget_driver *driver;
 	struct extcon_dev *extcon;
 	struct work_struct extcon_work;
+	struct phy *phy;
 
 	struct renesas_usb3_ep *usb3_ep;
 	int num_usb3_eps;
@@ -2056,7 +2055,7 @@ static u32 usb3_calc_rammap_val(struct renesas_usb3_ep *usb3_ep,
 				const struct usb_endpoint_descriptor *desc)
 {
 	int i;
-	const u32 max_packet_array[] = {8, 16, 32, 64, 512};
+	static const u32 max_packet_array[] = {8, 16, 32, 64, 512};
 	u32 mpkt = PN_RAMMAP_MPKT(1024);
 
 	for (i = 0; i < ARRAY_SIZE(max_packet_array); i++) {
@@ -2239,7 +2238,9 @@ static int renesas_usb3_start(struct usb_gadget *gadget,
 	/* hook up the driver */
 	usb3->driver = driver;
 
-	pm_runtime_enable(usb3_to_dev(usb3));
+	if (usb3->phy)
+		phy_init(usb3->phy);
+
 	pm_runtime_get_sync(usb3_to_dev(usb3));
 
 	renesas_usb3_init_controller(usb3);
@@ -2256,8 +2257,10 @@ static int renesas_usb3_stop(struct usb_gadget *gadget)
 	usb3->driver = NULL;
 	renesas_usb3_stop_controller(usb3);
 
+	if (usb3->phy)
+		phy_exit(usb3->phy);
+
 	pm_runtime_put(usb3_to_dev(usb3));
-	pm_runtime_disable(usb3_to_dev(usb3));
 
 	return 0;
 }
@@ -2405,6 +2408,9 @@ static int renesas_usb3_remove(struct platform_device *pdev)
 	renesas_usb3_dma_free_prd(usb3, &pdev->dev);
 
 	__renesas_usb3_ep_free_request(usb3->ep0_req);
+	if (usb3->phy)
+		phy_put(usb3->phy);
+	pm_runtime_disable(usb3_to_dev(usb3));
 
 	return 0;
 }
@@ -2560,20 +2566,15 @@ static int renesas_usb3_probe(struct platform_device *pdev)
 {
 	struct renesas_usb3 *usb3;
 	struct resource *res;
-	const struct of_device_id *match;
 	int irq, ret;
 	const struct renesas_usb3_priv *priv;
 	const struct soc_device_attribute *attr;
 
-	match = of_match_node(usb3_of_match, pdev->dev.of_node);
-	if (!match)
-		return -ENODEV;
-
 	attr = soc_device_match(renesas_usb3_quirks_match);
 	if (attr)
 		priv = attr->data;
 	else
-		priv = match->data;
+		priv = of_device_get_match_data(&pdev->dev);
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -2635,11 +2636,20 @@ static int renesas_usb3_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto err_dev_create;
 
+	/*
+	 * This is an optional. So, if this driver cannot get a phy,
+	 * this driver will not handle a phy anymore.
+	 */
+	usb3->phy = devm_phy_get(&pdev->dev, "usb");
+	if (IS_ERR(usb3->phy))
+		usb3->phy = NULL;
+
 	usb3->workaround_for_vbus = priv->workaround_for_vbus;
 
 	renesas_usb3_debugfs_init(usb3, &pdev->dev);
 
-	dev_info(&pdev->dev, "probed\n");
+	dev_info(&pdev->dev, "probed%s\n", usb3->phy ? " with phy" : "");
+	pm_runtime_enable(usb3_to_dev(usb3));
 
 	return 0;
 
@@ -2655,11 +2665,49 @@ err_alloc_prd:
 	return ret;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int renesas_usb3_suspend(struct device *dev)
+{
+	struct renesas_usb3 *usb3 = dev_get_drvdata(dev);
+
+	/* Not started */
+	if (!usb3->driver)
+		return 0;
+
+	renesas_usb3_stop_controller(usb3);
+	if (usb3->phy)
+		phy_exit(usb3->phy);
+	pm_runtime_put(dev);
+
+	return 0;
+}
+
+static int renesas_usb3_resume(struct device *dev)
+{
+	struct renesas_usb3 *usb3 = dev_get_drvdata(dev);
+
+	/* Not started */
+	if (!usb3->driver)
+		return 0;
+
+	if (usb3->phy)
+		phy_init(usb3->phy);
+	pm_runtime_get_sync(dev);
+	renesas_usb3_init_controller(usb3);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(renesas_usb3_pm_ops, renesas_usb3_suspend,
+			renesas_usb3_resume);
+
 static struct platform_driver renesas_usb3_driver = {
 	.probe		= renesas_usb3_probe,
 	.remove		= renesas_usb3_remove,
 	.driver		= {
 		.name =	(char *)udc_name,
+		.pm		= &renesas_usb3_pm_ops,
 		.of_match_table = of_match_ptr(usb3_of_match),
 	},
 };
diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c
index 42587b738a1f..31c7c5587cf9 100644
--- a/drivers/usb/gadget/udc/s3c-hsudc.c
+++ b/drivers/usb/gadget/udc/s3c-hsudc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /* linux/drivers/usb/gadget/s3c-hsudc.c
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
@@ -8,11 +9,7 @@
  * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints.
  * Each endpoint can be configured as either in or out endpoint. Endpoints
  * can be configured for Bulk or Interrupt transfer mode.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 #include <linux/kernel.h>
 #include <linux/module.h>
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c
index 394abd5d65c0..f154f49e98c8 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.c
+++ b/drivers/usb/gadget/udc/s3c2410_udc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * linux/drivers/usb/gadget/s3c2410_udc.c
  *
@@ -5,11 +6,6 @@
  *
  * Copyright (C) 2004-2007 Herbert Pötzl - Arnaud Patard
  *	Additional cleanups by Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #define pr_fmt(fmt) "s3c2410_udc: " fmt
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.h b/drivers/usb/gadget/udc/s3c2410_udc.h
index 93bf225f1969..bdcaa8dd300f 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.h
+++ b/drivers/usb/gadget/udc/s3c2410_udc.h
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * linux/drivers/usb/gadget/s3c2410_udc.h
  * Samsung on-chip full speed USB device controllers
  *
  * Copyright (C) 2004-2007 Herbert Pötzl - Arnaud Patard
  *	Additional cleanups by Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #ifndef _S3C2410_UDC_H
diff --git a/drivers/usb/gadget/udc/snps_udc_core.c b/drivers/usb/gadget/udc/snps_udc_core.c
index 38a165dbf924..d4da47f4f6f4 100644
--- a/drivers/usb/gadget/udc/snps_udc_core.c
+++ b/drivers/usb/gadget/udc/snps_udc_core.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * amd5536.c -- AMD 5536 UDC high/full speed USB device controller
  *
  * Copyright (C) 2005-2007 AMD (http://www.amd.com)
  * Author: Thomas Dahlmann
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 /*
@@ -1733,7 +1729,7 @@ static void udc_soft_reset(struct udc *dev)
 }
 
 /* RDE timer callback to set RDE bit */
-static void udc_timer_function(unsigned long v)
+static void udc_timer_function(struct timer_list *unused)
 {
 	u32 tmp;
 
@@ -1813,7 +1809,7 @@ static void udc_handle_halt_state(struct udc_ep *ep)
 }
 
 /* Stall timer callback to poll S bit and set it again after */
-static void udc_pollstall_timer_function(unsigned long v)
+static void udc_pollstall_timer_function(struct timer_list *unused)
 {
 	struct udc_ep *ep;
 	int halted = 0;
@@ -3067,14 +3063,12 @@ void udc_remove(struct udc *dev)
 	stop_timer++;
 	if (timer_pending(&udc_timer))
 		wait_for_completion(&on_exit);
-	if (udc_timer.data)
-		del_timer_sync(&udc_timer);
+	del_timer_sync(&udc_timer);
 	/* remove pollstall timer */
 	stop_pollstall_timer++;
 	if (timer_pending(&udc_pollstall_timer))
 		wait_for_completion(&on_pollstall_exit);
-	if (udc_pollstall_timer.data)
-		del_timer_sync(&udc_pollstall_timer);
+	del_timer_sync(&udc_pollstall_timer);
 	udc = NULL;
 }
 EXPORT_SYMBOL_GPL(udc_remove);
@@ -3164,10 +3158,6 @@ int udc_probe(struct udc *dev)
 	u32		reg;
 	int		retval;
 
-	/* mark timer as not initialized */
-	udc_timer.data = 0;
-	udc_pollstall_timer.data = 0;
-
 	/* device struct setup */
 	dev->gadget.ops = &udc_ops;
 
@@ -3207,13 +3197,8 @@ int udc_probe(struct udc *dev)
 		goto finished;
 
 	/* timer init */
-	init_timer(&udc_timer);
-	udc_timer.function = udc_timer_function;
-	udc_timer.data = 1;
-	/* timer pollstall init */
-	init_timer(&udc_pollstall_timer);
-	udc_pollstall_timer.function = udc_pollstall_timer_function;
-	udc_pollstall_timer.data = 1;
+	timer_setup(&udc_timer, udc_timer_function, 0);
+	timer_setup(&udc_pollstall_timer, udc_pollstall_timer_function, 0);
 
 	/* set SD */
 	reg = readl(&dev->regs->ctl);
diff --git a/drivers/usb/gadget/udc/snps_udc_plat.c b/drivers/usb/gadget/udc/snps_udc_plat.c
index e8a5fdaee37d..32f1d3e90c26 100644
--- a/drivers/usb/gadget/udc/snps_udc_plat.c
+++ b/drivers/usb/gadget/udc/snps_udc_plat.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * snps_udc_plat.c - Synopsys UDC Platform Driver
  *
  * Copyright (C) 2016 Broadcom
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/extcon.h>
diff --git a/drivers/usb/gadget/udc/trace.c b/drivers/usb/gadget/udc/trace.c
index 8c551ab91ad8..7430624c0bd7 100644
--- a/drivers/usb/gadget/udc/trace.c
+++ b/drivers/usb/gadget/udc/trace.c
@@ -1,17 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * trace.c - USB Gadget Framework Trace Support
  *
  * Copyright (C) 2016 Intel Corporation
  * Author: Felipe Balbi <felipe.balbi@linux.intel.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #define CREATE_TRACE_POINTS
diff --git a/drivers/usb/gadget/udc/trace.h b/drivers/usb/gadget/udc/trace.h
index da29874b5366..f07ddb3f4bb9 100644
--- a/drivers/usb/gadget/udc/trace.h
+++ b/drivers/usb/gadget/udc/trace.h
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * udc.c - Core UDC Framework
  *
  * Copyright (C) 2016 Intel Corporation
  * Author: Felipe Balbi <felipe.balbi@linux.intel.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 #undef TRACE_SYSTEM
diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c
index de207a90571e..7da2b9ce8cb3 100644
--- a/drivers/usb/gadget/udc/udc-xilinx.c
+++ b/drivers/usb/gadget/udc/udc-xilinx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Xilinx USB peripheral controller driver
  *
@@ -8,12 +9,6 @@
  *
  * Some parts of this driver code is based on the driver for at91-series
  * USB peripheral controller (at91_udc.c).
- *
- * This program is free software; you can redistribute it
- * and/or modify it under the terms of the GNU General Public
- * License as published by the Free Software Foundation;
- * either version 2 of the License, or (at your option) any
- * later version.
  */
 
 #include <linux/delay.h>
diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
index 73a4dfba0edb..566ab261e8b7 100644
--- a/drivers/usb/gadget/usbstring.c
+++ b/drivers/usb/gadget/usbstring.c
@@ -1,10 +1,6 @@
+// SPDX-License-Identifier: LGPL-2.1+
 /*
  * Copyright (C) 2003 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published
- * by the Free Software Foundation; either version 2.1 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/errno.h>
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index fa5692dec832..b80a94e632af 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -45,12 +45,12 @@ config USB_XHCI_PLATFORM
 	  If unsure, say N.
 
 config USB_XHCI_MTK
-	tristate "xHCI support for Mediatek MT65xx/MT7621"
+	tristate "xHCI support for MediaTek SoCs"
 	select MFD_SYSCON
 	depends on (MIPS && SOC_MT7621) || ARCH_MEDIATEK || COMPILE_TEST
 	---help---
 	  Say 'Y' to enable the support for the xHCI host controller
-	  found in Mediatek MT65xx SoCs.
+	  found in MediaTek SoCs.
 	  If unsure, say N.
 
 config USB_XHCI_MVEBU
@@ -222,18 +222,6 @@ config USB_EHCI_HCD_AT91
           Enables support for the on-chip EHCI controller on
           Atmel chips.
 
-config USB_EHCI_MSM
-	tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller"
-	depends on ARCH_QCOM
-	select USB_EHCI_ROOT_HUB_TT
-	---help---
-	  Enables support for the USB Host controller present on the
-	  Qualcomm chipsets. Root Hub has inbuilt TT.
-	  This driver depends on OTG driver for PHY initialization,
-	  clock management, powering up VBUS, and power management.
-	  This driver is not supported on boards like trout which
-	  has an external PHY.
-
 config USB_EHCI_TEGRA
        tristate "NVIDIA Tegra HCD support"
        depends on ARCH_TEGRA
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 4ab2689c8952..32b036e2ffef 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -26,6 +26,10 @@ ifneq ($(CONFIG_USB_XHCI_RCAR), )
 	xhci-plat-hcd-y		+= xhci-rcar.o
 endif
 
+ifneq ($(CONFIG_DEBUG_FS),)
+	xhci-hcd-y		+= xhci-debugfs.o
+endif
+
 obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
 
 obj-$(CONFIG_USB_PCI)	+= pci-quirks.o
@@ -40,7 +44,6 @@ obj-$(CONFIG_USB_EHCI_HCD_SPEAR)	+= ehci-spear.o
 obj-$(CONFIG_USB_EHCI_HCD_STI)	+= ehci-st.o
 obj-$(CONFIG_USB_EHCI_EXYNOS)	+= ehci-exynos.o
 obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
-obj-$(CONFIG_USB_EHCI_MSM)	+= ehci-msm.o
 obj-$(CONFIG_USB_EHCI_TEGRA)	+= ehci-tegra.o
 obj-$(CONFIG_USB_W90X900_EHCI)	+= ehci-w90x900.o
 
diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c
index 5f425c89faf1..2400a826397a 100644
--- a/drivers/usb/host/bcma-hcd.c
+++ b/drivers/usb/host/bcma-hcd.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Broadcom specific Advanced Microcontroller Bus
  * Broadcom USB-core driver (BCMA bus glue)
@@ -16,8 +17,6 @@
  *
  * Derived from the USBcore related parts of Broadcom-SB
  * Copyright 2005-2011 Broadcom Corporation
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 #include <linux/bcma/bcma.h>
 #include <linux/delay.h>
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 7440722bfbf0..3ba140ceaf52 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for EHCI UHP on Atmel chips
  *
@@ -5,10 +6,6 @@
  *                     Nicolas Ferre <nicolas.ferre@atmel.com>
  *
  *  Based on various ehci-*.c drivers
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
  */
 
 #include <linux/clk.h>
@@ -205,7 +202,8 @@ static int __maybe_unused ehci_atmel_drv_resume(struct device *dev)
 	struct atmel_ehci_priv *atmel_ehci = hcd_to_atmel_ehci_priv(hcd);
 
 	atmel_start_clock(atmel_ehci);
-	return ehci_resume(hcd, false);
+	ehci_resume(hcd, false);
+	return 0;
 }
 
 #ifdef CONFIG_OF
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index cbb9b8e12c3c..19f00424f53e 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -1,16 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (c) 2001-2002 by David Brownell
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
  */
 
 /* this file is part of ehci-hcd.c */
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index 26b641100639..d9145a8f35d2 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -1,15 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * SAMSUNG EXYNOS USB HOST EHCI Controller
  *
  * Copyright (C) 2011 Samsung Electronics Co.Ltd
  * Author: Jingoo Han <jg1.han@samsung.com>
  * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
 
 #include <linux/clk.h>
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index d025cc06dda7..c5094cb88cd5 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -1,21 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2005-2009 MontaVista Software, Inc.
  * Copyright 2008,2012,2015      Freescale Semiconductor, Inc.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
  * Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
  * by Hunter Wu.
  * Power Management support by Dave Liu <daveliu@freescale.com>,
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index 1a8a60a57cf2..cbc422032e50 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /* Copyright (C) 2005-2010,2012 Freescale Semiconductor, Inc.
  * Copyright (c) 2005 MontaVista Software
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #ifndef _EHCI_FSL_H
 #define _EHCI_FSL_H
diff --git a/drivers/usb/host/ehci-grlib.c b/drivers/usb/host/ehci-grlib.c
index 21650044b09e..656b8c08efc8 100644
--- a/drivers/usb/host/ehci-grlib.c
+++ b/drivers/usb/host/ehci-grlib.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for Aeroflex Gaisler GRLIB GRUSBHC EHCI host controller
  *
@@ -9,20 +10,6 @@
  * (c) Valentine Barshak <vbarshak@ru.mvista.com>
  * and in turn based on "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de>
  * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/err.h>
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 6e834b83a104..7f0737449df7 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1,23 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Enhanced Host Controller Interface (EHCI) driver for USB.
  *
  * Maintainer: Alan Stern <stern@rowland.harvard.edu>
  *
  * Copyright (c) 2000-2004 by David Brownell
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/module.h>
@@ -1012,7 +999,7 @@ idle_timeout:
 			qh_destroy(ehci, qh);
 			break;
 		}
-		/* else FALL THROUGH */
+		/* fall through */
 	default:
 		/* caller was supposed to have unlinked any requests;
 		 * that's not our job.  just leak this memory.
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index df169c8e7225..facafdf8fb95 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2001-2004 by David Brownell
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 /* this file is part of ehci-hcd.c */
diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index 9b7e63977215..21307d862af6 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (c) 2001 by David Brownell
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 /* this file is part of ehci-hcd.c */
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
deleted file mode 100644
index 2f8d3af811ce..000000000000
--- a/drivers/usb/host/ehci-msm.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/* ehci-msm.c - HSUSB Host Controller Driver Implementation
- *
- * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
- *
- * Partly derived from ehci-fsl.c and ehci-hcd.c
- * Copyright (c) 2000-2004 by David Brownell
- * Copyright (c) 2005 MontaVista Software
- *
- * All source code in this file is licensed under the following license except
- * where indicated.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * See the GNU General Public License for more details.
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, you can find it at http://www.fsf.org
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/msm_hsusb_hw.h>
-#include <linux/usb.h>
-#include <linux/usb/hcd.h>
-#include <linux/acpi.h>
-
-#include "ehci.h"
-
-#define MSM_USB_BASE (hcd->regs)
-
-#define DRIVER_DESC "Qualcomm On-Chip EHCI Host Controller"
-
-static const char hcd_name[] = "ehci-msm";
-static struct hc_driver __read_mostly msm_hc_driver;
-
-static int ehci_msm_reset(struct usb_hcd *hcd)
-{
-	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-	int retval;
-
-	ehci->caps = USB_CAPLENGTH;
-	hcd->has_tt = 1;
-
-	retval = ehci_setup(hcd);
-	if (retval)
-		return retval;
-
-	/* select ULPI phy and clear other status/control bits in PORTSC */
-	writel(PORTSC_PTS_ULPI, USB_PORTSC);
-	/* bursts of unspecified length. */
-	writel(0, USB_AHBBURST);
-	/* Use the AHB transactor, allow posted data writes */
-	writel(0x8, USB_AHBMODE);
-	/* Disable streaming mode and select host mode */
-	writel(0x13, USB_USBMODE);
-	/* Disable ULPI_TX_PKT_EN_CLR_FIX which is valid only for HSIC */
-	writel(readl(USB_GENCONFIG_2) & ~ULPI_TX_PKT_EN_CLR_FIX, USB_GENCONFIG_2);
-
-	return 0;
-}
-
-static int ehci_msm_probe(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd;
-	struct resource *res;
-	struct usb_phy *phy;
-	int ret;
-
-	dev_dbg(&pdev->dev, "ehci_msm proble\n");
-
-	hcd = usb_create_hcd(&msm_hc_driver, &pdev->dev, dev_name(&pdev->dev));
-	if (!hcd) {
-		dev_err(&pdev->dev, "Unable to create HCD\n");
-		return  -ENOMEM;
-	}
-
-	ret = platform_get_irq(pdev, 0);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Unable to get IRQ resource\n");
-		goto put_hcd;
-	}
-	hcd->irq = ret;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "Unable to get memory resource\n");
-		ret = -ENODEV;
-		goto put_hcd;
-	}
-
-	hcd->rsrc_start = res->start;
-	hcd->rsrc_len = resource_size(res);
-	hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len);
-	if (!hcd->regs) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		ret = -ENOMEM;
-		goto put_hcd;
-	}
-
-	/*
-	 * If there is an OTG driver, let it take care of PHY initialization,
-	 * clock management, powering up VBUS, mapping of registers address
-	 * space and power management.
-	 */
-	if (pdev->dev.of_node)
-		phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
-	else
-		phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
-
-	if (IS_ERR(phy)) {
-		if (PTR_ERR(phy) == -EPROBE_DEFER) {
-			dev_err(&pdev->dev, "unable to find transceiver\n");
-			ret = -EPROBE_DEFER;
-			goto put_hcd;
-		}
-		phy = NULL;
-	}
-
-	hcd->usb_phy = phy;
-	device_init_wakeup(&pdev->dev, 1);
-
-	if (phy && phy->otg) {
-		/*
-		 * MSM OTG driver takes care of adding the HCD and
-		 * placing hardware into low power mode via runtime PM.
-		 */
-		ret = otg_set_host(phy->otg, &hcd->self);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "unable to register with transceiver\n");
-			goto put_hcd;
-		}
-
-		pm_runtime_no_callbacks(&pdev->dev);
-		pm_runtime_enable(&pdev->dev);
-	} else {
-		ret = usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
-		if (ret)
-			goto put_hcd;
-	}
-
-	return 0;
-
-put_hcd:
-	usb_put_hcd(hcd);
-
-	return ret;
-}
-
-static int ehci_msm_remove(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-	device_init_wakeup(&pdev->dev, 0);
-	pm_runtime_disable(&pdev->dev);
-	pm_runtime_set_suspended(&pdev->dev);
-
-	if (hcd->usb_phy && hcd->usb_phy->otg)
-		otg_set_host(hcd->usb_phy->otg, NULL);
-	else
-		usb_remove_hcd(hcd);
-
-	usb_put_hcd(hcd);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int ehci_msm_pm_suspend(struct device *dev)
-{
-	struct usb_hcd *hcd = dev_get_drvdata(dev);
-	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-	bool do_wakeup = device_may_wakeup(dev);
-
-	dev_dbg(dev, "ehci-msm PM suspend\n");
-
-	/* Only call ehci_suspend if ehci_setup has been done */
-	if (ehci->sbrn)
-		return ehci_suspend(hcd, do_wakeup);
-
-	return 0;
-}
-
-static int ehci_msm_pm_resume(struct device *dev)
-{
-	struct usb_hcd *hcd = dev_get_drvdata(dev);
-	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-
-	dev_dbg(dev, "ehci-msm PM resume\n");
-
-	/* Only call ehci_resume if ehci_setup has been done */
-	if (ehci->sbrn)
-		ehci_resume(hcd, false);
-
-	return 0;
-}
-
-#else
-#define ehci_msm_pm_suspend	NULL
-#define ehci_msm_pm_resume	NULL
-#endif
-
-static const struct dev_pm_ops ehci_msm_dev_pm_ops = {
-	.suspend         = ehci_msm_pm_suspend,
-	.resume          = ehci_msm_pm_resume,
-};
-
-static const struct acpi_device_id msm_ehci_acpi_ids[] = {
-	{ "QCOM8040", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(acpi, msm_ehci_acpi_ids);
-
-static const struct of_device_id msm_ehci_dt_match[] = {
-	{ .compatible = "qcom,ehci-host", },
-	{}
-};
-MODULE_DEVICE_TABLE(of, msm_ehci_dt_match);
-
-static struct platform_driver ehci_msm_driver = {
-	.probe	= ehci_msm_probe,
-	.remove	= ehci_msm_remove,
-	.shutdown = usb_hcd_platform_shutdown,
-	.driver = {
-		   .name = "msm_hsusb_host",
-		   .pm = &ehci_msm_dev_pm_ops,
-		   .of_match_table = msm_ehci_dt_match,
-		   .acpi_match_table = ACPI_PTR(msm_ehci_acpi_ids),
-	},
-};
-
-static const struct ehci_driver_overrides msm_overrides __initconst = {
-	.reset = ehci_msm_reset,
-};
-
-static int __init ehci_msm_init(void)
-{
-	if (usb_disabled())
-		return -ENODEV;
-
-	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-	ehci_init_driver(&msm_hc_driver, &msm_overrides);
-	return platform_driver_register(&ehci_msm_driver);
-}
-module_init(ehci_msm_init);
-
-static void __exit ehci_msm_cleanup(void)
-{
-	platform_driver_unregister(&ehci_msm_driver);
-}
-module_exit(ehci_msm_cleanup);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_ALIAS("platform:msm-ehci");
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 849806a75f1c..de764459e05a 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
  * Author: Chao Xie <chao.xie@marvell.com>
  *        Neil Zhang <zhangwm@marvell.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index c7a9b31eeaef..c9f91e6c72b6 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -1,20 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 4d308533bc83..854b146a457d 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * ehci-omap.c - driver for USBHOST on OMAP3/4 processors
  *
@@ -14,21 +15,6 @@
  *	Contact: Felipe Balbi <felipe.balbi@nokia.com>
  *
  * Based on "ehci-fsl.c" and "ehci-au1xxx.c" ehci glue layers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 1aec87ec68df..1ad72647a069 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * drivers/usb/host/ehci-orion.c
  *
  * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 93326974ff4b..fe9422d3bcdc 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -1,21 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * EHCI HCD (Host Controller Driver) PCI Bus Glue.
  *
  * Copyright (c) 2000-2004 by David Brownell
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index f1908ea9fbd8..b065a960adc2 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Generic platform ehci driver
  *
@@ -16,8 +17,6 @@
  * Copyright 2000-2002 David Brownell
  * Copyright 1999 Linus Torvalds
  * Copyright 1999 Gregory P. Smith
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 #include <linux/acpi.h>
 #include <linux/clk.h>
@@ -40,12 +39,11 @@
 
 #define DRIVER_DESC "EHCI generic platform driver"
 #define EHCI_MAX_CLKS 4
-#define EHCI_MAX_RSTS 4
 #define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv)
 
 struct ehci_platform_priv {
 	struct clk *clks[EHCI_MAX_CLKS];
-	struct reset_control *rsts[EHCI_MAX_RSTS];
+	struct reset_control *rsts;
 	struct phy **phys;
 	int num_phys;
 	bool reset_on_resume;
@@ -151,7 +149,7 @@ static int ehci_platform_probe(struct platform_device *dev)
 	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
 	struct ehci_platform_priv *priv;
 	struct ehci_hcd *ehci;
-	int err, irq, phy_num, clk = 0, rst;
+	int err, irq, phy_num, clk = 0;
 
 	if (usb_disabled())
 		return -ENODEV;
@@ -239,22 +237,16 @@ static int ehci_platform_probe(struct platform_device *dev)
 		}
 	}
 
-	for (rst = 0; rst < EHCI_MAX_RSTS; rst++) {
-		priv->rsts[rst] = devm_reset_control_get_shared_by_index(
-					&dev->dev, rst);
-		if (IS_ERR(priv->rsts[rst])) {
-			err = PTR_ERR(priv->rsts[rst]);
-			if (err == -EPROBE_DEFER)
-				goto err_reset;
-			priv->rsts[rst] = NULL;
-			break;
-		}
-
-		err = reset_control_deassert(priv->rsts[rst]);
-		if (err)
-			goto err_reset;
+	priv->rsts = devm_reset_control_array_get_optional_shared(&dev->dev);
+	if (IS_ERR(priv->rsts)) {
+		err = PTR_ERR(priv->rsts);
+		goto err_put_clks;
 	}
 
+	err = reset_control_deassert(priv->rsts);
+	if (err)
+		goto err_put_clks;
+
 	if (pdata->big_endian_desc)
 		ehci->big_endian_desc = 1;
 	if (pdata->big_endian_mmio)
@@ -310,8 +302,7 @@ err_power:
 	if (pdata->power_off)
 		pdata->power_off(dev);
 err_reset:
-	while (--rst >= 0)
-		reset_control_assert(priv->rsts[rst]);
+	reset_control_assert(priv->rsts);
 err_put_clks:
 	while (--clk >= 0)
 		clk_put(priv->clks[clk]);
@@ -329,15 +320,14 @@ static int ehci_platform_remove(struct platform_device *dev)
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
 	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
-	int clk, rst;
+	int clk;
 
 	usb_remove_hcd(hcd);
 
 	if (pdata->power_off)
 		pdata->power_off(dev);
 
-	for (rst = 0; rst < EHCI_MAX_RSTS && priv->rsts[rst]; rst++)
-		reset_control_assert(priv->rsts[rst]);
+	reset_control_assert(priv->rsts);
 
 	for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++)
 		clk_put(priv->clks[clk]);
diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c
index 342816a7f8b1..46e160370d6e 100644
--- a/drivers/usb/host/ehci-pmcmsp.c
+++ b/drivers/usb/host/ehci-pmcmsp.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * PMC MSP EHCI (Host Controller Driver) for USB.
  *
  * (C) Copyright 2006-2010 PMC-Sierra Inc
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
  */
 
 /* includes */
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index 1a10c8d542ca..576f7d79ad4e 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * EHCI HCD (Host Controller Driver) for USB.
  *
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 7934ff9b35e1..8c733492d8fe 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -1,21 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  PS3 EHCI Host Controller driver
  *
  *  Copyright (C) 2006 Sony Computer Entertainment Inc.
  *  Copyright 2006 Sony Corp.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <asm/firmware.h>
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 8f3f055c05fa..88158324dcae 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2001-2004 by David Brownell
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 /* this file is part of ehci-hcd.c */
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 6bc6304672bc..e56db44708bc 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1,20 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (c) 2001-2004 by David Brownell
  * Copyright (c) 2003 Michal Sojka, for high-speed iso transfers
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 /* this file is part of ehci-hcd.c */
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
index 5caf88d679e4..a9ee767952c1 100644
--- a/drivers/usb/host/ehci-sh.c
+++ b/drivers/usb/host/ehci-sh.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * SuperH EHCI host controller driver
  *
  * Copyright (C) 2010  Paul Mundt
  *
  * Based on ohci-sh.c and ehci-atmel.c.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
  */
 #include <linux/platform_device.h>
 #include <linux/clk.h>
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
index 1f25c7985f5b..add796c78561 100644
--- a/drivers/usb/host/ehci-spear.c
+++ b/drivers/usb/host/ehci-spear.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
 * Driver for EHCI HCD on SPEAr SOC
 *
@@ -5,10 +6,6 @@
 * Deepak Sikri <deepak.sikri@st.com>
 *
 * Based on various ehci-*.c drivers
-*
-* This file is subject to the terms and conditions of the GNU General Public
-* License. See the file COPYING in the main directory of this archive for
-* more details.
 */
 
 #include <linux/clk.h>
diff --git a/drivers/usb/host/ehci-st.c b/drivers/usb/host/ehci-st.c
index be4a2788fc58..3c1362ab70be 100644
--- a/drivers/usb/host/ehci-st.c
+++ b/drivers/usb/host/ehci-st.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * ST EHCI driver
  *
@@ -6,10 +7,6 @@
  * Author: Peter Griffin <peter.griffin@linaro.org>
  *
  * Derived from ehci-platform.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/clk.h>
diff --git a/drivers/usb/host/ehci-sysfs.c b/drivers/usb/host/ehci-sysfs.c
index 5216f2b09d63..71fb61dd4a87 100644
--- a/drivers/usb/host/ehci-sysfs.c
+++ b/drivers/usb/host/ehci-sysfs.c
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2007 by Alan Stern
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 /* this file is part of ehci-hcd.c */
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 9a3d7db5be57..c809f7d2f08f 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -1,19 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * EHCI-compliant USB host controller driver for NVIDIA Tegra SoCs
  *
  * Copyright (C) 2010 Google, Inc.
  * Copyright (C) 2009 - 2013 NVIDIA Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
  */
 
 #include <linux/clk.h>
diff --git a/drivers/usb/host/ehci-tilegx.c b/drivers/usb/host/ehci-tilegx.c
index bdb93b6a356f..610ed437ed2c 100644
--- a/drivers/usb/host/ehci-tilegx.c
+++ b/drivers/usb/host/ehci-tilegx.c
@@ -1,15 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright 2012 Tilera Corporation. All Rights Reserved.
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License
- *   as published by the Free Software Foundation, version 2.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *   NON INFRINGEMENT.  See the GNU General Public License for
- *   more details.
  */
 
 /*
diff --git a/drivers/usb/host/ehci-timer.c b/drivers/usb/host/ehci-timer.c
index 0b6cdb723192..4fcebda4b79d 100644
--- a/drivers/usb/host/ehci-timer.c
+++ b/drivers/usb/host/ehci-timer.c
@@ -1,15 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2012 by Alan Stern
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
  */
 
 /* This file is part of ehci-hcd.c */
diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c
index 63b9d0c67963..6d77ace1697b 100644
--- a/drivers/usb/host/ehci-w90x900.c
+++ b/drivers/usb/host/ehci-w90x900.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * linux/driver/usb/host/ehci-w90x900.c
  *
  * Copyright (c) 2008 Nuvoton technology corporation.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
  */
 
 #include <linux/dma-mapping.h>
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index f54480850bb8..d2a27578e440 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * EHCI HCD (Host Controller Driver) for USB.
  *
@@ -8,21 +9,6 @@
  * Based on "ehci-ppc-of.c" by Valentine Barshak <vbarshak@ru.mvista.com>
  * and "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de>
  * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
  */
 
 #include <linux/err.h>
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index a8e36170d8b8..c8e9a48e1d51 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (c) 2001-2002 by David Brownell
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #ifndef __LINUX_EHCI_HCD_H
diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c
index b58e7a60913a..fafa91189e45 100644
--- a/drivers/usb/host/fhci-dbg.c
+++ b/drivers/usb/host/fhci-dbg.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Freescale QUICC Engine USB Host Controller Driver
  *
@@ -8,11 +9,6 @@
  *               Peter Barada <peterb@logicpd.com>
  * Copyright (c) MontaVista Software, Inc. 2008.
  *               Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 55a0ae6f2d74..48fe9e6c2465 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Freescale QUICC Engine USB Host Controller Driver
  *
@@ -8,11 +9,6 @@
  *               Peter Barada <peterb@logicpd.com>
  * Copyright (c) MontaVista Software, Inc. 2008.
  *               Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c
index 60d55eb3de0d..c359dcdb9b13 100644
--- a/drivers/usb/host/fhci-hub.c
+++ b/drivers/usb/host/fhci-hub.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Freescale QUICC Engine USB Host Controller Driver
  *
@@ -8,11 +9,6 @@
  *               Peter Barada <peterb@logicpd.com>
  * Copyright (c) MontaVista Software, Inc. 2008.
  *               Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/host/fhci-mem.c b/drivers/usb/host/fhci-mem.c
index b0b88f57a5ac..658aedc6adc1 100644
--- a/drivers/usb/host/fhci-mem.c
+++ b/drivers/usb/host/fhci-mem.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Freescale QUICC Engine USB Host Controller Driver
  *
@@ -8,11 +9,6 @@
  *               Peter Barada <peterb@logicpd.com>
  * Copyright (c) MontaVista Software, Inc. 2008.
  *               Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/host/fhci-q.c b/drivers/usb/host/fhci-q.c
index 03be7494a476..669c240523fe 100644
--- a/drivers/usb/host/fhci-q.c
+++ b/drivers/usb/host/fhci-q.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Freescale QUICC Engine USB Host Controller Driver
  *
@@ -8,11 +9,6 @@
  *               Peter Barada <peterb@logicpd.com>
  * Copyright (c) MontaVista Software, Inc. 2008.
  *               Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
index 2f162faabbca..3d12cdd5f999 100644
--- a/drivers/usb/host/fhci-sched.c
+++ b/drivers/usb/host/fhci-sched.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Freescale QUICC Engine USB Host Controller Driver
  *
@@ -8,11 +9,6 @@
  *               Peter Barada <peterb@logicpd.com>
  * Copyright (c) MontaVista Software, Inc. 2008.
  *               Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
index f82ad5df1b0d..3a4e8f616751 100644
--- a/drivers/usb/host/fhci-tds.c
+++ b/drivers/usb/host/fhci-tds.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Freescale QUICC Engine USB Host Controller Driver
  *
@@ -8,11 +9,6 @@
  *               Peter Barada <peterb@logicpd.com>
  * Copyright (c) MontaVista Software, Inc. 2008.
  *               Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h
index 3fc82c1c3c73..e7ec41d62410 100644
--- a/drivers/usb/host/fhci.h
+++ b/drivers/usb/host/fhci.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Freescale QUICC Engine USB Host Controller Driver
  *
@@ -8,11 +9,6 @@
  *               Peter Barada <peterb@logicpd.com>
  * Copyright (c) MontaVista Software, Inc. 2008.
  *               Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #ifndef __FHCI_H
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 457cc6525abd..62fc955085a1 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /* Faraday FOTG210 EHCI-like driver
  *
  * Copyright (c) 2013 Faraday Technology Corporation
@@ -7,20 +8,6 @@
  *	   Po-Yu Chuang <ratbert.chuang@gmail.com>
  *
  * Most of code borrowed from the Linux-3.7 EHCI driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/module.h>
 #include <linux/device.h>
@@ -5449,7 +5436,7 @@ idle_timeout:
 			qh_destroy(fotg210, qh);
 			break;
 		}
-		/* else FALL THROUGH */
+		/* fall through */
 	default:
 		/* caller was supposed to have unlinked any requests;
 		 * that's not our job.  just leak this memory.
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index ba557cdba8ef..677f9d592109 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Setup platform devices needed by the Freescale multi-port host
  * and/or dual-role USB controller modules based on the description
  * in flat device tree.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
index da3b18038d23..684d6f074c3a 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Host Wire Adapter:
  * Driver glue, HWA-specific functions, bridges to WAHC and WUSBHC
@@ -5,21 +6,6 @@
  * Copyright (C) 2005-2006 Intel Corporation
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
  * The HWA driver is a simple layer that forwards requests to the WAHC
  * (Wire Adater Host Controller) or WUSBHC (Wireless USB Host
  * Controller) layers.
diff --git a/drivers/usb/host/imx21-dbg.c b/drivers/usb/host/imx21-dbg.c
index 4f320d050da7..b964f9a51d87 100644
--- a/drivers/usb/host/imx21-dbg.c
+++ b/drivers/usb/host/imx21-dbg.c
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (c) 2009 by Martin Fuzzey
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 /* this file is part of imx21-hcd.c */
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index 39ae7fb64b6f..3a8bbfe43a8e 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * USB Host Controller Driver for IMX21
  *
@@ -5,20 +6,6 @@
  * Copyright (C) 2009 Martin Fuzzey
  * Originally written by Jay Monkman <jtm@lopingdog.com>
  * Ported to 2.6.30, debugged and enhanced by Martin Fuzzey
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 
diff --git a/drivers/usb/host/imx21-hcd.h b/drivers/usb/host/imx21-hcd.h
index 05122f8a6983..7b9cf0a38d6e 100644
--- a/drivers/usb/host/imx21-hcd.h
+++ b/drivers/usb/host/imx21-hcd.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Macros and prototypes for i.MX21
  *
@@ -5,20 +6,6 @@
  * Copyright (C) 2009 Martin Fuzzey
  * Originally written by Jay Monkman <jtm@lopingdog.com>
  * Ported to 2.6.30, debugged and enhanced by Martin Fuzzey
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #ifndef __LINUX_IMX21_HCD_H__
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 73fec38754f9..5f9234b9cf7b 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * ISP116x HCD (Host Controller Driver) for USB.
  *
@@ -1018,6 +1019,7 @@ static int isp116x_hub_control(struct usb_hcd *hcd,
 			spin_lock_irqsave(&isp116x->lock, flags);
 			isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_OCIC);
 			spin_unlock_irqrestore(&isp116x->lock, flags);
+			/* fall through */
 		case C_HUB_LOCAL_POWER:
 			DBG("C_HUB_LOCAL_POWER\n");
 			break;
@@ -1433,8 +1435,10 @@ static int isp116x_bus_suspend(struct usb_hcd *hcd)
 		isp116x_write_reg32(isp116x, HCCONTROL,
 				    (val & ~HCCONTROL_HCFS) |
 				    HCCONTROL_USB_RESET);
+		/* fall through */
 	case HCCONTROL_USB_RESET:
 		ret = -EBUSY;
+		/* fall through */
 	default:		/* HCCONTROL_USB_SUSPEND */
 		spin_unlock_irqrestore(&isp116x->lock, flags);
 		break;
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 9b7e307e2d54..b21c386e6a46 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * ISP1362 HCD (Host Controller Driver) for USB.
  *
@@ -712,7 +713,7 @@ static inline void enable_istl_transfers(struct isp1362_hcd *isp1362_hcd, int fl
 static int submit_req(struct isp1362_hcd *isp1362_hcd, struct urb *urb,
 		      struct isp1362_ep *ep, struct isp1362_ep_queue *epq)
 {
-	int index = epq->free_ptd;
+	int index;
 
 	prepare_ptd(isp1362_hcd, urb, ep, epq, 0);
 	index = claim_ptd_buffers(epq, ep, ep->length);
@@ -1578,6 +1579,7 @@ static int isp1362_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			spin_lock_irqsave(&isp1362_hcd->lock, flags);
 			isp1362_write_reg32(isp1362_hcd, HCRHSTATUS, RH_HS_OCIC);
 			spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
+			break;
 		case C_HUB_LOCAL_POWER:
 			DBG(0, "C_HUB_LOCAL_POWER\n");
 			break;
@@ -2251,7 +2253,6 @@ static int isp1362_mem_config(struct usb_hcd *hcd)
 		return -ENOMEM;
 	}
 
-	total = istl_size + intl_size + atl_size;
 	spin_lock_irqsave(&isp1362_hcd->lock, flags);
 
 	for (i = 0; i < 2; i++) {
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index 0ece9a9341e5..afa321ab55fc 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MAX3421 Host Controller driver for USB.
  *
@@ -60,6 +61,7 @@
 #include <linux/spi/spi.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
+#include <linux/of.h>
 
 #include <linux/platform_data/max3421-hcd.h>
 
@@ -85,6 +87,8 @@
 			  USB_PORT_STAT_C_OVERCURRENT | \
 			  USB_PORT_STAT_C_RESET) << 16)
 
+#define MAX3421_GPOUT_COUNT	8
+
 enum max3421_rh_state {
 	MAX3421_RH_RESET,
 	MAX3421_RH_SUSPENDED,
@@ -1672,7 +1676,7 @@ max3421_gpout_set_value(struct usb_hcd *hcd, u8 pin_number, u8 value)
 	u8 mask, idx;
 
 	--pin_number;
-	if (pin_number > 7)
+	if (pin_number >= MAX3421_GPOUT_COUNT)
 		return;
 
 	mask = 1u << (pin_number % 4);
@@ -1696,10 +1700,10 @@ max3421_hub_control(struct usb_hcd *hcd, u16 type_req, u16 value, u16 index,
 	unsigned long flags;
 	int retval = 0;
 
-	spin_lock_irqsave(&max3421_hcd->lock, flags);
-
 	pdata = spi->dev.platform_data;
 
+	spin_lock_irqsave(&max3421_hcd->lock, flags);
+
 	switch (type_req) {
 	case ClearHubFeature:
 		break;
@@ -1832,10 +1836,34 @@ static const struct hc_driver max3421_hcd_desc = {
 };
 
 static int
+max3421_of_vbus_en_pin(struct device *dev, struct max3421_hcd_platform_data *pdata)
+{
+	int retval;
+	uint32_t value[2];
+
+	if (!pdata)
+		return -EINVAL;
+
+	retval = of_property_read_u32_array(dev->of_node, "maxim,vbus-en-pin", value, 2);
+	if (retval) {
+		dev_err(dev, "device tree node property 'maxim,vbus-en-pin' is missing\n");
+		return retval;
+	}
+	dev_info(dev, "property 'maxim,vbus-en-pin' value is <%d %d>\n", value[0], value[1]);
+
+	pdata->vbus_gpout = value[0];
+	pdata->vbus_active_level = value[1];
+
+	return 0;
+}
+
+static int
 max3421_probe(struct spi_device *spi)
 {
+	struct device *dev = &spi->dev;
 	struct max3421_hcd *max3421_hcd;
 	struct usb_hcd *hcd = NULL;
+	struct max3421_hcd_platform_data *pdata = NULL;
 	int retval = -ENOMEM;
 
 	if (spi_setup(spi) < 0) {
@@ -1843,6 +1871,41 @@ max3421_probe(struct spi_device *spi)
 		return -EFAULT;
 	}
 
+	if (!spi->irq) {
+		dev_err(dev, "Failed to get SPI IRQ");
+		return -EFAULT;
+	}
+
+	if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
+		pdata = devm_kzalloc(&spi->dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata) {
+			retval = -ENOMEM;
+			goto error;
+		}
+		retval = max3421_of_vbus_en_pin(dev, pdata);
+		if (retval)
+			goto error;
+
+		spi->dev.platform_data = pdata;
+	}
+
+	pdata = spi->dev.platform_data;
+	if (!pdata) {
+		dev_err(&spi->dev, "driver configuration data is not provided\n");
+		retval = -EFAULT;
+		goto error;
+	}
+	if (pdata->vbus_active_level > 1) {
+		dev_err(&spi->dev, "vbus active level value %d is out of range (0/1)\n", pdata->vbus_active_level);
+		retval = -EINVAL;
+		goto error;
+	}
+	if (pdata->vbus_gpout < 1 || pdata->vbus_gpout > MAX3421_GPOUT_COUNT) {
+		dev_err(&spi->dev, "vbus gpout value %d is out of range (1..8)\n", pdata->vbus_gpout);
+		retval = -EINVAL;
+		goto error;
+	}
+
 	hcd = usb_create_hcd(&max3421_hcd_desc, &spi->dev,
 			     dev_name(&spi->dev));
 	if (!hcd) {
@@ -1885,6 +1948,11 @@ max3421_probe(struct spi_device *spi)
 	return 0;
 
 error:
+	if (IS_ENABLED(CONFIG_OF) && dev->of_node && pdata) {
+		devm_kfree(&spi->dev, pdata);
+		spi->dev.platform_data = NULL;
+	}
+
 	if (hcd) {
 		kfree(max3421_hcd->tx);
 		kfree(max3421_hcd->rx);
@@ -1929,11 +1997,18 @@ max3421_remove(struct spi_device *spi)
 	return 0;
 }
 
+static const struct of_device_id max3421_of_match_table[] = {
+	{ .compatible = "maxim,max3421", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, max3421_of_match_table);
+
 static struct spi_driver max3421_driver = {
 	.probe		= max3421_probe,
 	.remove		= max3421_remove,
 	.driver		= {
 		.name	= "max3421-hcd",
+		.of_match_table = of_match_ptr(max3421_of_match_table),
 	},
 };
 
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 5302f988e7e6..5ad9e9bdc8ee 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * OHCI HCD (Host Controller Driver) for USB.
  *
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 05da2cb59612..0c507a0cfe1f 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * OHCI HCD (Host Controller Driver) for USB.
  *
@@ -5,10 +6,6 @@
  *
  * Derived from: ohci-omap.c and ohci-s3c2410.c
  * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <linux/clk.h>
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index c3eded317495..ac7d4ac34b02 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * OHCI HCD (Host Controller Driver) for USB.
  *
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index 6865b919403f..a39fae41bc70 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -1,14 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * SAMSUNG EXYNOS USB HOST OHCI Controller
  *
  * Copyright (C) 2011 Samsung Electronics Co.Ltd
  * Author: Jingoo Han <jg1.han@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
  */
 
 #include <linux/clk.h>
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index c86f89babd57..10887e09e9bc 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * Open Host Controller Interface (OHCI) driver for USB.
  *
@@ -382,7 +383,7 @@ sanitize:
 			ed_free (ohci, ed);
 			break;
 		}
-		/* else FALL THROUGH */
+		/* fall through */
 	default:
 		/* caller was supposed to have unlinked any requests;
 		 * that's not our job.  can't recover; must leak ed.
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 248eb7702463..fb7aaa3b9d06 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * OHCI HCD (Host Controller Driver) for USB.
  *
diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c
index ed8a762b8670..b3da3f12e5b1 100644
--- a/drivers/usb/host/ohci-mem.c
+++ b/drivers/usb/host/ohci-mem.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * OHCI HCD (Host Controller Driver) for USB.
  *
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index 6df8e2ed40fd..f5f532601092 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * driver for NXP USB Host devices
  *
@@ -13,10 +14,7 @@
  * NOTE: This driver does not have suspend/resume functionality
  * This driver is intended for engineering development purposes only
  *
- * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2005-2006 (c) MontaVista Software, Inc.
  */
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 91393ec7d850..0201c49bc4fc 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * OHCI HCD (Host Controller Driver) for USB.
  *
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index a84aebe9b0a9..fbcd34911025 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * OHCI HCD (Host Controller Driver) for USB.
  *
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index 61fe2b985070..1e6c954f4b3f 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Generic platform ohci driver
  *
@@ -11,8 +12,6 @@
  * Copyright 2000-2002 David Brownell
  * Copyright 1999 Linus Torvalds
  * Copyright 1999 Gregory P. Smith
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 #include <linux/clk.h>
@@ -34,12 +33,11 @@
 
 #define DRIVER_DESC "OHCI generic platform driver"
 #define OHCI_MAX_CLKS 3
-#define OHCI_MAX_RESETS 2
 #define hcd_to_ohci_priv(h) ((struct ohci_platform_priv *)hcd_to_ohci(h)->priv)
 
 struct ohci_platform_priv {
 	struct clk *clks[OHCI_MAX_CLKS];
-	struct reset_control *resets[OHCI_MAX_RESETS];
+	struct reset_control *resets;
 	struct phy **phys;
 	int num_phys;
 };
@@ -119,7 +117,7 @@ static int ohci_platform_probe(struct platform_device *dev)
 	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
 	struct ohci_platform_priv *priv;
 	struct ohci_hcd *ohci;
-	int err, irq, phy_num, clk = 0, rst = 0;
+	int err, irq, phy_num, clk = 0;
 
 	if (usb_disabled())
 		return -ENODEV;
@@ -204,21 +202,17 @@ static int ohci_platform_probe(struct platform_device *dev)
 				break;
 			}
 		}
-		for (rst = 0; rst < OHCI_MAX_RESETS; rst++) {
-			priv->resets[rst] =
-				devm_reset_control_get_shared_by_index(
-								&dev->dev, rst);
-			if (IS_ERR(priv->resets[rst])) {
-				err = PTR_ERR(priv->resets[rst]);
-				if (err == -EPROBE_DEFER)
-					goto err_reset;
-				priv->resets[rst] = NULL;
-				break;
-			}
-			err = reset_control_deassert(priv->resets[rst]);
-			if (err)
-				goto err_reset;
+
+		priv->resets = devm_reset_control_array_get_optional_shared(
+								&dev->dev);
+		if (IS_ERR(priv->resets)) {
+			err = PTR_ERR(priv->resets);
+			goto err_put_clks;
 		}
+
+		err = reset_control_deassert(priv->resets);
+		if (err)
+			goto err_put_clks;
 	}
 
 	if (pdata->big_endian_desc)
@@ -279,8 +273,7 @@ err_power:
 		pdata->power_off(dev);
 err_reset:
 	pm_runtime_disable(&dev->dev);
-	while (--rst >= 0)
-		reset_control_assert(priv->resets[rst]);
+	reset_control_assert(priv->resets);
 err_put_clks:
 	while (--clk >= 0)
 		clk_put(priv->clks[clk]);
@@ -298,7 +291,7 @@ static int ohci_platform_remove(struct platform_device *dev)
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
 	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
-	int clk, rst;
+	int clk;
 
 	pm_runtime_get_sync(&dev->dev);
 	usb_remove_hcd(hcd);
@@ -306,8 +299,7 @@ static int ohci_platform_remove(struct platform_device *dev)
 	if (pdata->power_off)
 		pdata->power_off(dev);
 
-	for (rst = 0; rst < OHCI_MAX_RESETS && priv->resets[rst]; rst++)
-		reset_control_assert(priv->resets[rst]);
+	reset_control_assert(priv->resets);
 
 	for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++)
 		clk_put(priv->clks[clk]);
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index 4f87a5c61b08..76a9b40b08f1 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * OHCI HCD (Host Controller Driver) for USB.
  *
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index 71d8bc4c27f6..20a23d795adf 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -1,21 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  PS3 OHCI Host Controller driver
  *
  *  Copyright (C) 2006 Sony Computer Entertainment Inc.
  *  Copyright 2006 Sony Corp.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <asm/firmware.h>
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 21c010ffb03c..3e2474959735 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * OHCI HCD (Host Controller Driver) for USB.
  *
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 641fed609911..b2ec8c399363 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * OHCI HCD (Host Controller Driver) for USB.
  *
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index b006b93126f7..4511e27e9da8 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * OHCI HCD (Host Controller Driver) for USB.
  *
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 3a9ea32508df..ebec9a7699e3 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * OHCI HCD (Host Controller Driver) for USB.
  *
@@ -42,7 +43,7 @@
 #if 0
 static void dump_hci_status(struct usb_hcd *hcd, const char *label)
 {
-	unsigned long status = sa1111_readl(hcd->regs + USB_STATUS);
+	unsigned long status = readl_relaxed(hcd->regs + USB_STATUS);
 
 	printk(KERN_DEBUG "%s USB_STATUS = { %s%s%s%s%s}\n", label,
 	     ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
@@ -134,7 +135,7 @@ static int sa1111_start_hc(struct sa1111_dev *dev)
 	 * Configure the power sense and control lines.  Place the USB
 	 * host controller in reset.
 	 */
-	sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
+	writel_relaxed(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
 		      dev->mapbase + USB_RESET);
 
 	/*
@@ -144,7 +145,7 @@ static int sa1111_start_hc(struct sa1111_dev *dev)
 	ret = sa1111_enable_device(dev);
 	if (ret == 0) {
 		udelay(11);
-		sa1111_writel(usb_rst, dev->mapbase + USB_RESET);
+		writel_relaxed(usb_rst, dev->mapbase + USB_RESET);
 	}
 
 	return ret;
@@ -159,8 +160,8 @@ static void sa1111_stop_hc(struct sa1111_dev *dev)
 	/*
 	 * Put the USB host controller into reset.
 	 */
-	usb_rst = sa1111_readl(dev->mapbase + USB_RESET);
-	sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
+	usb_rst = readl_relaxed(dev->mapbase + USB_RESET);
+	writel_relaxed(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
 		      dev->mapbase + USB_RESET);
 
 	/*
@@ -178,7 +179,7 @@ static void sa1111_stop_hc(struct sa1111_dev *dev)
 static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)
 {
 	struct usb_hcd *hcd;
-	int ret;
+	int ret, irq;
 
 	if (usb_disabled())
 		return -ENODEV;
@@ -196,6 +197,12 @@ static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)
 	hcd->rsrc_start = dev->res.start;
 	hcd->rsrc_len = resource_size(&dev->res);
 
+	irq = sa1111_get_irq(dev, 1);
+	if (irq <= 0) {
+		ret = irq ? : -ENXIO;
+		goto err1;
+	}
+
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 		dev_dbg(&dev->dev, "request_mem_region failed\n");
 		ret = -EBUSY;
@@ -208,7 +215,7 @@ static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)
 	if (ret)
 		goto err2;
 
-	ret = usb_add_hcd(hcd, dev->irq[1], 0);
+	ret = usb_add_hcd(hcd, irq, 0);
 	if (ret == 0) {
 		device_wakeup_enable(hcd->self.controller);
 		return ret;
@@ -241,8 +248,9 @@ static int ohci_hcd_sa1111_remove(struct sa1111_dev *dev)
 	return 0;
 }
 
-static void ohci_hcd_sa1111_shutdown(struct sa1111_dev *dev)
+static void ohci_hcd_sa1111_shutdown(struct device *_dev)
 {
+	struct sa1111_dev *dev = to_sa1111_device(_dev);
 	struct usb_hcd *hcd = sa1111_get_drvdata(dev);
 
 	if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
@@ -255,9 +263,9 @@ static struct sa1111_driver ohci_hcd_sa1111_driver = {
 	.drv = {
 		.name	= "sa1111-ohci",
 		.owner	= THIS_MODULE,
+		.shutdown = ohci_hcd_sa1111_shutdown,
 	},
 	.devid		= SA1111_DEVID_USB,
 	.probe		= ohci_hcd_sa1111_probe,
 	.remove		= ohci_hcd_sa1111_remove,
-	.shutdown	= ohci_hcd_sa1111_shutdown,
 };
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index d4e0f7cd96fa..c9233cddf9a2 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * OHCI HCD (Host Controller Driver) for USB.
  *
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
index 56478ed2f932..69fa04697793 100644
--- a/drivers/usb/host/ohci-spear.c
+++ b/drivers/usb/host/ohci-spear.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
 * OHCI HCD (Host Controller Driver) for USB.
 *
@@ -5,10 +6,6 @@
 * Deepak Sikri<deepak.sikri@st.com>
 *
 * Based on various ohci-*.c drivers
-*
-* This file is licensed under the terms of the GNU General Public
-* License version 2. This program is licensed "as is" without any
-* warranty of any kind, whether express or implied.
 */
 
 #include <linux/clk.h>
diff --git a/drivers/usb/host/ohci-st.c b/drivers/usb/host/ohci-st.c
index 02816a1515a1..992807c9850a 100644
--- a/drivers/usb/host/ohci-st.c
+++ b/drivers/usb/host/ohci-st.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * ST OHCI driver
  *
@@ -6,10 +7,6 @@
  * Author: Peter Griffin <peter.griffin@linaro.org>
  *
  * Derived from ohci-platform.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/clk.h>
diff --git a/drivers/usb/host/ohci-tilegx.c b/drivers/usb/host/ohci-tilegx.c
index e1b208da460a..d21ca3ce9a30 100644
--- a/drivers/usb/host/ohci-tilegx.c
+++ b/drivers/usb/host/ohci-tilegx.c
@@ -1,15 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright 2012 Tilera Corporation. All Rights Reserved.
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License
- *   as published by the Free Software Foundation, version 2.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *   NON INFRINGEMENT.  See the GNU General Public License for
- *   more details.
  */
 
 /*
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index 16d081a093bb..a631dbb369d7 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * OHCI HCD(Host Controller Driver) for USB.
  *
@@ -18,10 +19,6 @@
  * Written from sparse documentation from Toshiba and Sharp's driver
  * for the 2.4 kernel,
  *	usb-ohci-tc6393.c(C) Copyright 2004 Lineo Solutions, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 /*#include <linux/fs.h>
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 12742d002d2d..508a803139dd 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * OHCI HCD (Host Controller Driver) for USB.
  *
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index ed20fb34c897..0bf7759aae78 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -1,23 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (c) 2008 Rodolfo Giometti <giometti@linux.it>
  * Copyright (c) 2008 Eurotech S.p.A. <info@eurtech.it>
  *
  * This code is *strongly* based on EHCI-HCD code by David Brownell since
  * the chip is a quasi-EHCI compatible.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/module.h>
@@ -3040,7 +3027,7 @@ idle_timeout:
 			qh_put(qh);
 			break;
 		}
-		/* else FALL THROUGH */
+		/* fall through */
 	default:
 nogood:
 		/* caller was supposed to have unlinked any requests;
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 6dda3623a276..161536717025 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * This file contains code to reset and initialize USB host controllers.
  * Some of it includes work-arounds for PCI hardware and BIOS quirks.
@@ -841,7 +842,7 @@ static void quirk_usb_disable_ehci(struct pci_dev *pdev)
 			ehci_bios_handoff(pdev, op_reg_base, cap, offset);
 			break;
 		case 0: /* Illegal reserved cap, set cap=0 so we exit */
-			cap = 0; /* then fallthrough... */
+			cap = 0; /* fall through */
 		default:
 			dev_warn(&pdev->dev,
 				 "EHCI: unrecognized capability %02x\n",
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 5e5fc9d7d533..f3d9ba420a97 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * R8A66597 HCD (Host Controller Driver)
  *
@@ -7,20 +8,6 @@
  * Portions Copyright (C) 1999 Roman Weissgaerber
  *
  * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 
 #include <linux/module.h>
@@ -1273,7 +1260,7 @@ static void set_td_timer(struct r8a66597 *r8a66597, struct r8a66597_td *td)
 			break;
 		}
 
-		mod_timer(&r8a66597->td_timer[td->pipenum],
+		mod_timer(&r8a66597->timers[td->pipenum].td,
 			  jiffies + msecs_to_jiffies(time));
 	}
 }
@@ -1733,9 +1720,10 @@ static void r8a66597_root_hub_control(struct r8a66597 *r8a66597, int port)
 	}
 }
 
-static void r8a66597_interval_timer(unsigned long _r8a66597)
+static void r8a66597_interval_timer(struct timer_list *t)
 {
-	struct r8a66597 *r8a66597 = (struct r8a66597 *)_r8a66597;
+	struct r8a66597_timers *timers = from_timer(timers, t, interval);
+	struct r8a66597 *r8a66597 = timers->r8a66597;
 	unsigned long flags;
 	u16 pipenum;
 	struct r8a66597_td *td;
@@ -1745,7 +1733,7 @@ static void r8a66597_interval_timer(unsigned long _r8a66597)
 	for (pipenum = 0; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
 		if (!(r8a66597->interval_map & (1 << pipenum)))
 			continue;
-		if (timer_pending(&r8a66597->interval_timer[pipenum]))
+		if (timer_pending(&r8a66597->timers[pipenum].interval))
 			continue;
 
 		td = r8a66597_get_td(r8a66597, pipenum);
@@ -1756,9 +1744,10 @@ static void r8a66597_interval_timer(unsigned long _r8a66597)
 	spin_unlock_irqrestore(&r8a66597->lock, flags);
 }
 
-static void r8a66597_td_timer(unsigned long _r8a66597)
+static void r8a66597_td_timer(struct timer_list *t)
 {
-	struct r8a66597 *r8a66597 = (struct r8a66597 *)_r8a66597;
+	struct r8a66597_timers *timers = from_timer(timers, t, td);
+	struct r8a66597 *r8a66597 = timers->r8a66597;
 	unsigned long flags;
 	u16 pipenum;
 	struct r8a66597_td *td, *new_td = NULL;
@@ -1768,7 +1757,7 @@ static void r8a66597_td_timer(unsigned long _r8a66597)
 	for (pipenum = 0; pipenum < R8A66597_MAX_NUM_PIPE; pipenum++) {
 		if (!(r8a66597->timeout_map & (1 << pipenum)))
 			continue;
-		if (timer_pending(&r8a66597->td_timer[pipenum]))
+		if (timer_pending(&r8a66597->timers[pipenum].td))
 			continue;
 
 		td = r8a66597_get_td(r8a66597, pipenum);
@@ -1942,7 +1931,7 @@ static int r8a66597_urb_enqueue(struct usb_hcd *hcd,
 	if (request) {
 		if (td->pipe->info.timer_interval) {
 			r8a66597->interval_map |= 1 << td->pipenum;
-			mod_timer(&r8a66597->interval_timer[td->pipenum],
+			mod_timer(&r8a66597->timers[td->pipenum].interval,
 				  jiffies + msecs_to_jiffies(
 					td->pipe->info.timer_interval));
 		} else {
@@ -2495,11 +2484,10 @@ static int r8a66597_probe(struct platform_device *pdev)
 
 	for (i = 0; i < R8A66597_MAX_NUM_PIPE; i++) {
 		INIT_LIST_HEAD(&r8a66597->pipe_queue[i]);
-		setup_timer(&r8a66597->td_timer[i], r8a66597_td_timer,
-			    (unsigned long)r8a66597);
-		setup_timer(&r8a66597->interval_timer[i],
-				r8a66597_interval_timer,
-				(unsigned long)r8a66597);
+		r8a66597->timers[i].r8a66597 = r8a66597;
+		timer_setup(&r8a66597->timers[i].td, r8a66597_td_timer, 0);
+		timer_setup(&r8a66597->timers[i].interval,
+			    r8a66597_interval_timer, 0);
 	}
 	INIT_LIST_HEAD(&r8a66597->child_device);
 
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index 672cea307abb..51973a923526 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * R8A66597 HCD (Host Controller Driver)
  *
@@ -7,20 +8,6 @@
  * Portions Copyright (C) 1999 Roman Weissgaerber
  *
  * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 
 #ifndef __R8A66597_H__
@@ -107,6 +94,14 @@ struct r8a66597_root_hub {
 	struct r8a66597_device	*dev;
 };
 
+struct r8a66597;
+
+struct r8a66597_timers {
+	struct timer_list td;
+	struct timer_list interval;
+	struct r8a66597 *r8a66597;
+};
+
 struct r8a66597 {
 	spinlock_t lock;
 	void __iomem *reg;
@@ -117,8 +112,7 @@ struct r8a66597 {
 	struct list_head		pipe_queue[R8A66597_MAX_NUM_PIPE];
 
 	struct timer_list rh_timer;
-	struct timer_list td_timer[R8A66597_MAX_NUM_PIPE];
-	struct timer_list interval_timer[R8A66597_MAX_NUM_PIPE];
+	struct r8a66597_timers timers[R8A66597_MAX_NUM_PIPE];
 
 	unsigned short address_map;
 	unsigned short timeout_map;
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 24ad1d6cec25..601fb00603cc 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * SL811HS HCD (Host Controller Driver) for USB.
  *
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index 88a9bffe93df..72136373ffab 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * PCMCIA driver for SL811HS (as found in REX-CFU1U)
  * Filename: sl811_cs.c
diff --git a/drivers/usb/host/ssb-hcd.c b/drivers/usb/host/ssb-hcd.c
index 62b6b7804c66..016987764afb 100644
--- a/drivers/usb/host/ssb-hcd.c
+++ b/drivers/usb/host/ssb-hcd.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Sonics Silicon Backplane
  * Broadcom USB-core driver  (SSB bus glue)
@@ -15,8 +16,6 @@
  *
  * Derived from the USBcore related parts of Broadcom-SB
  * Copyright 2005-2011 Broadcom Corporation
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 #include <linux/ssb/ssb.h>
 #include <linux/delay.h>
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index c38855aed62c..032b8652910a 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
 * Host Controller Driver for the Elan Digital Systems U132 adapter
 *
@@ -7,11 +8,6 @@
 * Author and Maintainer - Tony Olech - Elan Digital Systems
 * tony.olech@elandigitalsystems.com
 *
-* This program is free software;you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation, version 2.
-*
-*
 * This driver was written by Tony Olech(tony.olech@elandigitalsystems.com)
 * based on various USB host drivers in the 2.6.15 linux kernel
 * with constant reference to the 3rd Edition of Linux Device Drivers
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index c3267a78c94e..babeefd84ffd 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Universal Host Controller Interface driver for USB.
  *
diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c
index 773249306031..c5ac9efb076a 100644
--- a/drivers/usb/host/whci/asl.c
+++ b/drivers/usb/host/whci/asl.c
@@ -1,19 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless Host Controller (WHC) asynchronous schedule management.
  *
  * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/kernel.h>
 #include <linux/gfp.h>
diff --git a/drivers/usb/host/whci/debug.c b/drivers/usb/host/whci/debug.c
index 774b89d28fae..f154e5791bfd 100644
--- a/drivers/usb/host/whci/debug.c
+++ b/drivers/usb/host/whci/debug.c
@@ -1,19 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless Host Controller (WHC) debug.
  *
  * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/slab.h>
 #include <linux/kernel.h>
diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
index cf84269c3e6d..8af9dcfea127 100644
--- a/drivers/usb/host/whci/hcd.c
+++ b/drivers/usb/host/whci/hcd.c
@@ -1,19 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless Host Controller (WHC) driver.
  *
  * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/drivers/usb/host/whci/hw.c b/drivers/usb/host/whci/hw.c
index 6afa2e379160..22b3b7f7419d 100644
--- a/drivers/usb/host/whci/hw.c
+++ b/drivers/usb/host/whci/hw.c
@@ -1,19 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless Host Controller (WHC) hardware access helpers.
  *
  * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/kernel.h>
 #include <linux/dma-mapping.h>
diff --git a/drivers/usb/host/whci/init.c b/drivers/usb/host/whci/init.c
index ad8eb575c30a..82416973f773 100644
--- a/drivers/usb/host/whci/init.c
+++ b/drivers/usb/host/whci/init.c
@@ -1,19 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless Host Controller (WHC) initialization.
  *
  * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/kernel.h>
 #include <linux/gfp.h>
diff --git a/drivers/usb/host/whci/int.c b/drivers/usb/host/whci/int.c
index 0c086b2790d1..7e4ad1b8f3e3 100644
--- a/drivers/usb/host/whci/int.c
+++ b/drivers/usb/host/whci/int.c
@@ -1,19 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless Host Controller (WHC) interrupt handling.
  *
  * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/kernel.h>
 #include <linux/uwb/umc.h>
diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c
index 33c5580b4d25..bb84366f7bd3 100644
--- a/drivers/usb/host/whci/pzl.c
+++ b/drivers/usb/host/whci/pzl.c
@@ -1,19 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless Host Controller (WHC) periodic schedule management.
  *
  * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/kernel.h>
 #include <linux/gfp.h>
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index c0e6812426b3..925166a207aa 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -1,19 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless Host Controller (WHC) qset management.
  *
  * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/kernel.h>
 #include <linux/dma-mapping.h>
diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h
index c80c7d93bc4a..139476997e7c 100644
--- a/drivers/usb/host/whci/whcd.h
+++ b/drivers/usb/host/whci/whcd.h
@@ -1,21 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless Host Controller (WHC) private header.
  *
  * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
  */
 #ifndef __WHCD_H
 #define __WHCD_H
diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h
index 4d4cbc0730bf..5a86a57a80cc 100644
--- a/drivers/usb/host/whci/whci-hc.h
+++ b/drivers/usb/host/whci/whci-hc.h
@@ -1,21 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless Host Controller (WHC) data structures.
  *
  * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
  */
 #ifndef _WHCI_WHCI_HC_H
 #define _WHCI_WHCI_HC_H
diff --git a/drivers/usb/host/whci/wusb.c b/drivers/usb/host/whci/wusb.c
index 8d2762682869..8a4d805ff63a 100644
--- a/drivers/usb/host/whci/wusb.c
+++ b/drivers/usb/host/whci/wusb.c
@@ -1,19 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless Host Controller (WHC) WUSB operations.
  *
  * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/kernel.h>
 #include <linux/uwb/umc.h>
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index 2c83b37ae8f2..584d7b9a3683 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * xHCI host controller driver
  *
@@ -5,19 +6,6 @@
  *
  * Author: Sarah Sharp
  * Some code borrowed from the Linux EHCI driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include "xhci.h"
diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c
new file mode 100644
index 000000000000..4f7895dbcf88
--- /dev/null
+++ b/drivers/usb/host/xhci-debugfs.c
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xhci-debugfs.c - xHCI debugfs interface
+ *
+ * Copyright (C) 2017 Intel Corporation
+ *
+ * Author: Lu Baolu <baolu.lu@linux.intel.com>
+ */
+
+#include <linux/slab.h>
+
+#include "xhci.h"
+#include "xhci-debugfs.h"
+
+static const struct debugfs_reg32 xhci_cap_regs[] = {
+	dump_register(CAPLENGTH),
+	dump_register(HCSPARAMS1),
+	dump_register(HCSPARAMS2),
+	dump_register(HCSPARAMS3),
+	dump_register(HCCPARAMS1),
+	dump_register(DOORBELLOFF),
+	dump_register(RUNTIMEOFF),
+	dump_register(HCCPARAMS2),
+};
+
+static const struct debugfs_reg32 xhci_op_regs[] = {
+	dump_register(USBCMD),
+	dump_register(USBSTS),
+	dump_register(PAGESIZE),
+	dump_register(DNCTRL),
+	dump_register(CRCR),
+	dump_register(DCBAAP_LOW),
+	dump_register(DCBAAP_HIGH),
+	dump_register(CONFIG),
+};
+
+static const struct debugfs_reg32 xhci_runtime_regs[] = {
+	dump_register(MFINDEX),
+	dump_register(IR0_IMAN),
+	dump_register(IR0_IMOD),
+	dump_register(IR0_ERSTSZ),
+	dump_register(IR0_ERSTBA_LOW),
+	dump_register(IR0_ERSTBA_HIGH),
+	dump_register(IR0_ERDP_LOW),
+	dump_register(IR0_ERDP_HIGH),
+};
+
+static const struct debugfs_reg32 xhci_extcap_legsup[] = {
+	dump_register(EXTCAP_USBLEGSUP),
+	dump_register(EXTCAP_USBLEGCTLSTS),
+};
+
+static const struct debugfs_reg32 xhci_extcap_protocol[] = {
+	dump_register(EXTCAP_REVISION),
+	dump_register(EXTCAP_NAME),
+	dump_register(EXTCAP_PORTINFO),
+	dump_register(EXTCAP_PORTTYPE),
+	dump_register(EXTCAP_MANTISSA1),
+	dump_register(EXTCAP_MANTISSA2),
+	dump_register(EXTCAP_MANTISSA3),
+	dump_register(EXTCAP_MANTISSA4),
+	dump_register(EXTCAP_MANTISSA5),
+	dump_register(EXTCAP_MANTISSA6),
+};
+
+static const struct debugfs_reg32 xhci_extcap_dbc[] = {
+	dump_register(EXTCAP_DBC_CAPABILITY),
+	dump_register(EXTCAP_DBC_DOORBELL),
+	dump_register(EXTCAP_DBC_ERSTSIZE),
+	dump_register(EXTCAP_DBC_ERST_LOW),
+	dump_register(EXTCAP_DBC_ERST_HIGH),
+	dump_register(EXTCAP_DBC_ERDP_LOW),
+	dump_register(EXTCAP_DBC_ERDP_HIGH),
+	dump_register(EXTCAP_DBC_CONTROL),
+	dump_register(EXTCAP_DBC_STATUS),
+	dump_register(EXTCAP_DBC_PORTSC),
+	dump_register(EXTCAP_DBC_CONT_LOW),
+	dump_register(EXTCAP_DBC_CONT_HIGH),
+	dump_register(EXTCAP_DBC_DEVINFO1),
+	dump_register(EXTCAP_DBC_DEVINFO2),
+};
+
+static struct dentry *xhci_debugfs_root;
+
+static struct xhci_regset *xhci_debugfs_alloc_regset(struct xhci_hcd *xhci)
+{
+	struct xhci_regset	*regset;
+
+	regset = kzalloc(sizeof(*regset), GFP_KERNEL);
+	if (!regset)
+		return NULL;
+
+	/*
+	 * The allocation and free of regset are executed in order.
+	 * We needn't a lock here.
+	 */
+	INIT_LIST_HEAD(&regset->list);
+	list_add_tail(&regset->list, &xhci->regset_list);
+
+	return regset;
+}
+
+static void xhci_debugfs_free_regset(struct xhci_regset *regset)
+{
+	if (!regset)
+		return;
+
+	list_del(&regset->list);
+	kfree(regset);
+}
+
+static void xhci_debugfs_regset(struct xhci_hcd *xhci, u32 base,
+				const struct debugfs_reg32 *regs,
+				size_t nregs, struct dentry *parent,
+				const char *fmt, ...)
+{
+	struct xhci_regset	*rgs;
+	va_list			args;
+	struct debugfs_regset32	*regset;
+	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
+
+	rgs = xhci_debugfs_alloc_regset(xhci);
+	if (!rgs)
+		return;
+
+	va_start(args, fmt);
+	vsnprintf(rgs->name, sizeof(rgs->name), fmt, args);
+	va_end(args);
+
+	regset = &rgs->regset;
+	regset->regs = regs;
+	regset->nregs = nregs;
+	regset->base = hcd->regs + base;
+
+	debugfs_create_regset32((const char *)rgs->name, 0444, parent, regset);
+}
+
+static void xhci_debugfs_extcap_regset(struct xhci_hcd *xhci, int cap_id,
+				       const struct debugfs_reg32 *regs,
+				       size_t n, const char *cap_name)
+{
+	u32			offset;
+	int			index = 0;
+	size_t			psic, nregs = n;
+	void __iomem		*base = &xhci->cap_regs->hc_capbase;
+
+	offset = xhci_find_next_ext_cap(base, 0, cap_id);
+	while (offset) {
+		if (cap_id == XHCI_EXT_CAPS_PROTOCOL) {
+			psic = XHCI_EXT_PORT_PSIC(readl(base + offset + 8));
+			nregs = min(4 + psic, n);
+		}
+
+		xhci_debugfs_regset(xhci, offset, regs, nregs,
+				    xhci->debugfs_root, "%s:%02d",
+				    cap_name, index);
+		offset = xhci_find_next_ext_cap(base, offset, cap_id);
+		index++;
+	}
+}
+
+static int xhci_ring_enqueue_show(struct seq_file *s, void *unused)
+{
+	dma_addr_t		dma;
+	struct xhci_ring	*ring = s->private;
+
+	dma = xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue);
+	seq_printf(s, "%pad\n", &dma);
+
+	return 0;
+}
+
+static int xhci_ring_dequeue_show(struct seq_file *s, void *unused)
+{
+	dma_addr_t		dma;
+	struct xhci_ring	*ring = s->private;
+
+	dma = xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue);
+	seq_printf(s, "%pad\n", &dma);
+
+	return 0;
+}
+
+static int xhci_ring_cycle_show(struct seq_file *s, void *unused)
+{
+	struct xhci_ring	*ring = s->private;
+
+	seq_printf(s, "%d\n", ring->cycle_state);
+
+	return 0;
+}
+
+static void xhci_ring_dump_segment(struct seq_file *s,
+				   struct xhci_segment *seg)
+{
+	int			i;
+	dma_addr_t		dma;
+	union xhci_trb		*trb;
+
+	for (i = 0; i < TRBS_PER_SEGMENT; i++) {
+		trb = &seg->trbs[i];
+		dma = seg->dma + i * sizeof(*trb);
+		seq_printf(s, "%pad: %s\n", &dma,
+			   xhci_decode_trb(trb->generic.field[0],
+					   trb->generic.field[1],
+					   trb->generic.field[2],
+					   trb->generic.field[3]));
+	}
+}
+
+static int xhci_ring_trb_show(struct seq_file *s, void *unused)
+{
+	int			i;
+	struct xhci_ring	*ring = s->private;
+	struct xhci_segment	*seg = ring->first_seg;
+
+	for (i = 0; i < ring->num_segs; i++) {
+		xhci_ring_dump_segment(s, seg);
+		seg = seg->next;
+	}
+
+	return 0;
+}
+
+static struct xhci_file_map ring_files[] = {
+	{"enqueue",		xhci_ring_enqueue_show, },
+	{"dequeue",		xhci_ring_dequeue_show, },
+	{"cycle",		xhci_ring_cycle_show, },
+	{"trbs",		xhci_ring_trb_show, },
+};
+
+static int xhci_ring_open(struct inode *inode, struct file *file)
+{
+	int			i;
+	struct xhci_file_map	*f_map;
+	const char		*file_name = file_dentry(file)->d_iname;
+
+	for (i = 0; i < ARRAY_SIZE(ring_files); i++) {
+		f_map = &ring_files[i];
+
+		if (strcmp(f_map->name, file_name) == 0)
+			break;
+	}
+
+	return single_open(file, f_map->show, inode->i_private);
+}
+
+static const struct file_operations xhci_ring_fops = {
+	.open			= xhci_ring_open,
+	.read			= seq_read,
+	.llseek			= seq_lseek,
+	.release		= single_release,
+};
+
+static int xhci_slot_context_show(struct seq_file *s, void *unused)
+{
+	struct xhci_hcd		*xhci;
+	struct xhci_slot_ctx	*slot_ctx;
+	struct xhci_slot_priv	*priv = s->private;
+	struct xhci_virt_device	*dev = priv->dev;
+
+	xhci = hcd_to_xhci(bus_to_hcd(dev->udev->bus));
+	slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx);
+	seq_printf(s, "%pad: %s\n", &dev->out_ctx->dma,
+		   xhci_decode_slot_context(slot_ctx->dev_info,
+					    slot_ctx->dev_info2,
+					    slot_ctx->tt_info,
+					    slot_ctx->dev_state));
+
+	return 0;
+}
+
+static int xhci_endpoint_context_show(struct seq_file *s, void *unused)
+{
+	int			dci;
+	dma_addr_t		dma;
+	struct xhci_hcd		*xhci;
+	struct xhci_ep_ctx	*ep_ctx;
+	struct xhci_slot_priv	*priv = s->private;
+	struct xhci_virt_device	*dev = priv->dev;
+
+	xhci = hcd_to_xhci(bus_to_hcd(dev->udev->bus));
+
+	for (dci = 1; dci < 32; dci++) {
+		ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, dci);
+		dma = dev->out_ctx->dma + dci * CTX_SIZE(xhci->hcc_params);
+		seq_printf(s, "%pad: %s\n", &dma,
+			   xhci_decode_ep_context(ep_ctx->ep_info,
+						  ep_ctx->ep_info2,
+						  ep_ctx->deq,
+						  ep_ctx->tx_info));
+	}
+
+	return 0;
+}
+
+static int xhci_device_name_show(struct seq_file *s, void *unused)
+{
+	struct xhci_slot_priv	*priv = s->private;
+	struct xhci_virt_device	*dev = priv->dev;
+
+	seq_printf(s, "%s\n", dev_name(&dev->udev->dev));
+
+	return 0;
+}
+
+static struct xhci_file_map context_files[] = {
+	{"name",		xhci_device_name_show, },
+	{"slot-context",	xhci_slot_context_show, },
+	{"ep-context",		xhci_endpoint_context_show, },
+};
+
+static int xhci_context_open(struct inode *inode, struct file *file)
+{
+	int			i;
+	struct xhci_file_map	*f_map;
+	const char		*file_name = file_dentry(file)->d_iname;
+
+	for (i = 0; i < ARRAY_SIZE(context_files); i++) {
+		f_map = &context_files[i];
+
+		if (strcmp(f_map->name, file_name) == 0)
+			break;
+	}
+
+	return single_open(file, f_map->show, inode->i_private);
+}
+
+static const struct file_operations xhci_context_fops = {
+	.open			= xhci_context_open,
+	.read			= seq_read,
+	.llseek			= seq_lseek,
+	.release		= single_release,
+};
+
+static void xhci_debugfs_create_files(struct xhci_hcd *xhci,
+				      struct xhci_file_map *files,
+				      size_t nentries, void *data,
+				      struct dentry *parent,
+				      const struct file_operations *fops)
+{
+	int			i;
+
+	for (i = 0; i < nentries; i++)
+		debugfs_create_file(files[i].name, 0444, parent, data, fops);
+}
+
+static struct dentry *xhci_debugfs_create_ring_dir(struct xhci_hcd *xhci,
+						   struct xhci_ring *ring,
+						   const char *name,
+						   struct dentry *parent)
+{
+	struct dentry		*dir;
+
+	dir = debugfs_create_dir(name, parent);
+	xhci_debugfs_create_files(xhci, ring_files, ARRAY_SIZE(ring_files),
+				  ring, dir, &xhci_ring_fops);
+
+	return dir;
+}
+
+static void xhci_debugfs_create_context_files(struct xhci_hcd *xhci,
+					      struct dentry *parent,
+					      int slot_id)
+{
+	struct xhci_virt_device	*dev = xhci->devs[slot_id];
+
+	xhci_debugfs_create_files(xhci, context_files,
+				  ARRAY_SIZE(context_files),
+				  dev->debugfs_private,
+				  parent, &xhci_context_fops);
+}
+
+void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci,
+				  struct xhci_virt_device *dev,
+				  int ep_index)
+{
+	struct xhci_ep_priv	*epriv;
+	struct xhci_slot_priv	*spriv = dev->debugfs_private;
+
+	if (spriv->eps[ep_index])
+		return;
+
+	epriv = kzalloc(sizeof(*epriv), GFP_KERNEL);
+	if (!epriv)
+		return;
+
+	snprintf(epriv->name, sizeof(epriv->name), "ep%02d", ep_index);
+	epriv->root = xhci_debugfs_create_ring_dir(xhci,
+						   dev->eps[ep_index].new_ring,
+						   epriv->name,
+						   spriv->root);
+	spriv->eps[ep_index] = epriv;
+}
+
+void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci,
+				  struct xhci_virt_device *dev,
+				  int ep_index)
+{
+	struct xhci_ep_priv	*epriv;
+	struct xhci_slot_priv	*spriv = dev->debugfs_private;
+
+	if (!spriv || !spriv->eps[ep_index])
+		return;
+
+	epriv = spriv->eps[ep_index];
+	debugfs_remove_recursive(epriv->root);
+	spriv->eps[ep_index] = NULL;
+	kfree(epriv);
+}
+
+void xhci_debugfs_create_slot(struct xhci_hcd *xhci, int slot_id)
+{
+	struct xhci_slot_priv	*priv;
+	struct xhci_virt_device	*dev = xhci->devs[slot_id];
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return;
+
+	snprintf(priv->name, sizeof(priv->name), "%02d", slot_id);
+	priv->root = debugfs_create_dir(priv->name, xhci->debugfs_slots);
+	priv->dev = dev;
+	dev->debugfs_private = priv;
+
+	xhci_debugfs_create_ring_dir(xhci, dev->eps[0].ring,
+				     "ep00", priv->root);
+
+	xhci_debugfs_create_context_files(xhci, priv->root, slot_id);
+}
+
+void xhci_debugfs_remove_slot(struct xhci_hcd *xhci, int slot_id)
+{
+	int			i;
+	struct xhci_slot_priv	*priv;
+	struct xhci_virt_device	*dev = xhci->devs[slot_id];
+
+	if (!dev || !dev->debugfs_private)
+		return;
+
+	priv = dev->debugfs_private;
+
+	debugfs_remove_recursive(priv->root);
+
+	for (i = 0; i < 31; i++)
+		kfree(priv->eps[i]);
+
+	kfree(priv);
+	dev->debugfs_private = NULL;
+}
+
+void xhci_debugfs_init(struct xhci_hcd *xhci)
+{
+	struct device		*dev = xhci_to_hcd(xhci)->self.controller;
+
+	xhci->debugfs_root = debugfs_create_dir(dev_name(dev),
+						xhci_debugfs_root);
+
+	INIT_LIST_HEAD(&xhci->regset_list);
+
+	xhci_debugfs_regset(xhci,
+			    0,
+			    xhci_cap_regs, ARRAY_SIZE(xhci_cap_regs),
+			    xhci->debugfs_root, "reg-cap");
+
+	xhci_debugfs_regset(xhci,
+			    HC_LENGTH(readl(&xhci->cap_regs->hc_capbase)),
+			    xhci_op_regs, ARRAY_SIZE(xhci_op_regs),
+			    xhci->debugfs_root, "reg-op");
+
+	xhci_debugfs_regset(xhci,
+			    readl(&xhci->cap_regs->run_regs_off) & RTSOFF_MASK,
+			    xhci_runtime_regs, ARRAY_SIZE(xhci_runtime_regs),
+			    xhci->debugfs_root, "reg-runtime");
+
+	xhci_debugfs_extcap_regset(xhci, XHCI_EXT_CAPS_LEGACY,
+				   xhci_extcap_legsup,
+				   ARRAY_SIZE(xhci_extcap_legsup),
+				   "reg-ext-legsup");
+
+	xhci_debugfs_extcap_regset(xhci, XHCI_EXT_CAPS_PROTOCOL,
+				   xhci_extcap_protocol,
+				   ARRAY_SIZE(xhci_extcap_protocol),
+				   "reg-ext-protocol");
+
+	xhci_debugfs_extcap_regset(xhci, XHCI_EXT_CAPS_DEBUG,
+				   xhci_extcap_dbc,
+				   ARRAY_SIZE(xhci_extcap_dbc),
+				   "reg-ext-dbc");
+
+	xhci_debugfs_create_ring_dir(xhci, xhci->cmd_ring,
+				     "command-ring",
+				     xhci->debugfs_root);
+
+	xhci_debugfs_create_ring_dir(xhci, xhci->event_ring,
+				     "event-ring",
+				     xhci->debugfs_root);
+
+	xhci->debugfs_slots = debugfs_create_dir("devices", xhci->debugfs_root);
+}
+
+void xhci_debugfs_exit(struct xhci_hcd *xhci)
+{
+	struct xhci_regset	*rgs, *tmp;
+
+	debugfs_remove_recursive(xhci->debugfs_root);
+	xhci->debugfs_root = NULL;
+	xhci->debugfs_slots = NULL;
+
+	list_for_each_entry_safe(rgs, tmp, &xhci->regset_list, list)
+		xhci_debugfs_free_regset(rgs);
+}
+
+void __init xhci_debugfs_create_root(void)
+{
+	xhci_debugfs_root = debugfs_create_dir("xhci", usb_debug_root);
+}
+
+void __exit xhci_debugfs_remove_root(void)
+{
+	debugfs_remove_recursive(xhci_debugfs_root);
+	xhci_debugfs_root = NULL;
+}
diff --git a/drivers/usb/host/xhci-debugfs.h b/drivers/usb/host/xhci-debugfs.h
new file mode 100644
index 000000000000..ac5bc40f5c3a
--- /dev/null
+++ b/drivers/usb/host/xhci-debugfs.h
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xhci-debugfs.h - xHCI debugfs interface
+ *
+ * Copyright (C) 2017 Intel Corporation
+ *
+ * Author: Lu Baolu <baolu.lu@linux.intel.com>
+ */
+
+#ifndef __LINUX_XHCI_DEBUGFS_H
+#define __LINUX_XHCI_DEBUGFS_H
+
+#include <linux/debugfs.h>
+
+#define DEBUGFS_NAMELEN 32
+
+#define REG_CAPLENGTH					0x00
+#define REG_HCSPARAMS1					0x04
+#define REG_HCSPARAMS2					0x08
+#define REG_HCSPARAMS3					0x0c
+#define REG_HCCPARAMS1					0x10
+#define REG_DOORBELLOFF					0x14
+#define REG_RUNTIMEOFF					0x18
+#define REG_HCCPARAMS2					0x1c
+
+#define	REG_USBCMD					0x00
+#define REG_USBSTS					0x04
+#define REG_PAGESIZE					0x08
+#define REG_DNCTRL					0x14
+#define REG_CRCR					0x18
+#define REG_DCBAAP_LOW					0x30
+#define REG_DCBAAP_HIGH					0x34
+#define REG_CONFIG					0x38
+
+#define REG_MFINDEX					0x00
+#define REG_IR0_IMAN					0x20
+#define REG_IR0_IMOD					0x24
+#define REG_IR0_ERSTSZ					0x28
+#define REG_IR0_ERSTBA_LOW				0x30
+#define REG_IR0_ERSTBA_HIGH				0x34
+#define REG_IR0_ERDP_LOW				0x38
+#define REG_IR0_ERDP_HIGH				0x3c
+
+#define REG_EXTCAP_USBLEGSUP				0x00
+#define REG_EXTCAP_USBLEGCTLSTS				0x04
+
+#define REG_EXTCAP_REVISION				0x00
+#define REG_EXTCAP_NAME					0x04
+#define REG_EXTCAP_PORTINFO				0x08
+#define REG_EXTCAP_PORTTYPE				0x0c
+#define REG_EXTCAP_MANTISSA1				0x10
+#define REG_EXTCAP_MANTISSA2				0x14
+#define REG_EXTCAP_MANTISSA3				0x18
+#define REG_EXTCAP_MANTISSA4				0x1c
+#define REG_EXTCAP_MANTISSA5				0x20
+#define REG_EXTCAP_MANTISSA6				0x24
+
+#define REG_EXTCAP_DBC_CAPABILITY			0x00
+#define REG_EXTCAP_DBC_DOORBELL				0x04
+#define REG_EXTCAP_DBC_ERSTSIZE				0x08
+#define REG_EXTCAP_DBC_ERST_LOW				0x10
+#define REG_EXTCAP_DBC_ERST_HIGH			0x14
+#define REG_EXTCAP_DBC_ERDP_LOW				0x18
+#define REG_EXTCAP_DBC_ERDP_HIGH			0x1c
+#define REG_EXTCAP_DBC_CONTROL				0x20
+#define REG_EXTCAP_DBC_STATUS				0x24
+#define REG_EXTCAP_DBC_PORTSC				0x28
+#define REG_EXTCAP_DBC_CONT_LOW				0x30
+#define REG_EXTCAP_DBC_CONT_HIGH			0x34
+#define REG_EXTCAP_DBC_DEVINFO1				0x38
+#define REG_EXTCAP_DBC_DEVINFO2				0x3c
+
+#define dump_register(nm)				\
+{							\
+	.name	= __stringify(nm),			\
+	.offset	= REG_ ##nm,				\
+}
+
+struct xhci_regset {
+	char			name[DEBUGFS_NAMELEN];
+	struct debugfs_regset32	regset;
+	size_t			nregs;
+	struct dentry		*parent;
+	struct list_head	list;
+};
+
+struct xhci_file_map {
+	const char		*name;
+	int			(*show)(struct seq_file *s, void *unused);
+};
+
+struct xhci_ep_priv {
+	char			name[DEBUGFS_NAMELEN];
+	struct dentry		*root;
+};
+
+struct xhci_slot_priv {
+	char			name[DEBUGFS_NAMELEN];
+	struct dentry		*root;
+	struct xhci_ep_priv	*eps[31];
+	struct xhci_virt_device	*dev;
+};
+
+#ifdef CONFIG_DEBUG_FS
+void xhci_debugfs_init(struct xhci_hcd *xhci);
+void xhci_debugfs_exit(struct xhci_hcd *xhci);
+void __init xhci_debugfs_create_root(void);
+void __exit xhci_debugfs_remove_root(void);
+void xhci_debugfs_create_slot(struct xhci_hcd *xhci, int slot_id);
+void xhci_debugfs_remove_slot(struct xhci_hcd *xhci, int slot_id);
+void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci,
+				  struct xhci_virt_device *virt_dev,
+				  int ep_index);
+void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci,
+				  struct xhci_virt_device *virt_dev,
+				  int ep_index);
+#else
+static inline void xhci_debugfs_init(struct xhci_hcd *xhci) { }
+static inline void xhci_debugfs_exit(struct xhci_hcd *xhci) { }
+static inline void __init xhci_debugfs_create_root(void) { }
+static inline void __exit xhci_debugfs_remove_root(void) { }
+static inline void xhci_debugfs_create_slot(struct xhci_hcd *x, int s) { }
+static inline void xhci_debugfs_remove_slot(struct xhci_hcd *x, int s) { }
+static inline void
+xhci_debugfs_create_endpoint(struct xhci_hcd *xhci,
+			     struct xhci_virt_device *virt_dev,
+			     int ep_index) { }
+static inline void
+xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci,
+			     struct xhci_virt_device *virt_dev,
+			     int ep_index) { }
+#endif /* CONFIG_DEBUG_FS */
+
+#endif /* __LINUX_XHCI_DEBUGFS_H */
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
index 28deea584884..bf7316e130d3 100644
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * xHCI host controller driver
  *
@@ -5,19 +6,6 @@
  *
  * Author: Sarah Sharp
  * Some code borrowed from the Linux EHCI driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 /* Up to 16 ms to halt an HC */
 #define XHCI_MAX_HALT_USEC	(16*1000)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index a2336deb5e36..2a90229be7a6 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * xHCI host controller driver
  *
@@ -5,19 +6,6 @@
  *
  * Author: Sarah Sharp
  * Some code borrowed from the Linux EHCI driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 
@@ -634,7 +622,10 @@ static int xhci_enter_test_mode(struct xhci_hcd *xhci,
 	xhci_dbg(xhci, "Disable all slots\n");
 	spin_unlock_irqrestore(&xhci->lock, *flags);
 	for (i = 1; i <= HCS_MAX_SLOTS(xhci->hcs_params1); i++) {
-		retval = xhci_disable_slot(xhci, NULL, i);
+		if (!xhci->devs[i])
+			continue;
+
+		retval = xhci_disable_slot(xhci, i);
 		if (retval)
 			xhci_err(xhci, "Failed to disable slot %d, %d. Enter test mode anyway\n",
 				 i, retval);
@@ -1374,6 +1365,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			break;
 		case USB_PORT_FEAT_C_SUSPEND:
 			bus_state->port_c_suspend &= ~(1 << wIndex);
+			/* fall through */
 		case USB_PORT_FEAT_C_RESET:
 		case USB_PORT_FEAT_C_BH_PORT_RESET:
 		case USB_PORT_FEAT_C_CONNECTION:
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 2a82c927ded2..e1fba4688509 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * xHCI host controller driver
  *
@@ -5,19 +6,6 @@
  *
  * Author: Sarah Sharp
  * Some code borrowed from the Linux EHCI driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/usb.h>
@@ -28,6 +16,7 @@
 
 #include "xhci.h"
 #include "xhci-trace.h"
+#include "xhci-debugfs.h"
 
 /*
  * Allocates a generic ring segment from the ring pool, sets the dma address,
@@ -465,8 +454,6 @@ int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
 	return 0;
 }
 
-#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
-
 static struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
 						    int type, gfp_t flags)
 {
@@ -801,8 +788,8 @@ void xhci_free_stream_info(struct xhci_hcd *xhci,
 static void xhci_init_endpoint_timer(struct xhci_hcd *xhci,
 		struct xhci_virt_ep *ep)
 {
-	setup_timer(&ep->stop_cmd_timer, xhci_stop_endpoint_command_watchdog,
-		    (unsigned long)ep);
+	timer_setup(&ep->stop_cmd_timer, xhci_stop_endpoint_command_watchdog,
+		    0);
 	ep->xhci = xhci;
 }
 
@@ -961,6 +948,7 @@ void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_id)
 		}
 	}
 	/* we are now at a leaf device */
+	xhci_debugfs_remove_slot(xhci, slot_id);
 	xhci_free_virt_device(xhci, slot_id);
 }
 
@@ -1311,6 +1299,7 @@ static unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
 		 * since it uses the same rules as low speed interrupt
 		 * endpoints.
 		 */
+		/* fall through */
 
 	case USB_SPEED_LOW:
 		if (usb_endpoint_xfer_int(&ep->desc) ||
@@ -1496,7 +1485,6 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 	ep_ctx->tx_info = cpu_to_le32(EP_MAX_ESIT_PAYLOAD_LO(max_esit_payload) |
 				      EP_AVG_TRB_LENGTH(avg_trb_len));
 
-	/* FIXME Debug endpoint context */
 	return 0;
 }
 
diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
index 6e7ddf6cafae..eea7360a18fc 100644
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2015 MediaTek Inc.
  * Author:
  *  Zhigang.Wei <zhigang.wei@mediatek.com>
  *  Chunfeng.Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <linux/kernel.h>
@@ -287,12 +278,13 @@ static bool need_bw_sch(struct usb_host_endpoint *ep,
 
 int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk)
 {
+	struct xhci_hcd *xhci = hcd_to_xhci(mtk->hcd);
 	struct mu3h_sch_bw_info *sch_array;
 	int num_usb_bus;
 	int i;
 
 	/* ss IN and OUT are separated */
-	num_usb_bus = mtk->num_u3_ports * 2 + mtk->num_u2_ports;
+	num_usb_bus = xhci->num_usb3_ports * 2 + xhci->num_usb2_ports;
 
 	sch_array = kcalloc(num_usb_bus, sizeof(*sch_array), GFP_KERNEL);
 	if (sch_array == NULL)
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 8fb60657ed4f..b62a1d23244b 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MediaTek xHCI Host Controller Driver
  *
  * Copyright (c) 2015 MediaTek Inc.
  * Author:
  *  Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <linux/clk.h>
@@ -43,6 +34,7 @@
 
 /* ip_pw_sts1 register */
 #define STS1_IP_SLEEP_STS	BIT(30)
+#define STS1_U3_MAC_RST	BIT(16)
 #define STS1_XHCI_RST		BIT(11)
 #define STS1_SYS125_RST	BIT(10)
 #define STS1_REF_RST		BIT(8)
@@ -91,6 +83,7 @@ static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk)
 {
 	struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
 	u32 value, check_val;
+	int u3_ports_disabed = 0;
 	int ret;
 	int i;
 
@@ -102,8 +95,13 @@ static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk)
 	value &= ~CTRL1_IP_HOST_PDN;
 	writel(value, &ippc->ip_pw_ctr1);
 
-	/* power on and enable all u3 ports */
+	/* power on and enable u3 ports except skipped ones */
 	for (i = 0; i < mtk->num_u3_ports; i++) {
+		if ((0x1 << i) & mtk->u3p_dis_msk) {
+			u3_ports_disabed++;
+			continue;
+		}
+
 		value = readl(&ippc->u3_ctrl_p[i]);
 		value &= ~(CTRL_U3_PORT_PDN | CTRL_U3_PORT_DIS);
 		value |= CTRL_U3_PORT_HOST_SEL;
@@ -125,6 +123,9 @@ static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk)
 	check_val = STS1_SYSPLL_STABLE | STS1_REF_RST |
 			STS1_SYS125_RST | STS1_XHCI_RST;
 
+	if (mtk->num_u3_ports > u3_ports_disabed)
+		check_val |= STS1_U3_MAC_RST;
+
 	ret = readl_poll_timeout(&ippc->ip_pw_sts1, value,
 			  (check_val == (value & check_val)), 100, 20000);
 	if (ret) {
@@ -145,8 +146,11 @@ static int xhci_mtk_host_disable(struct xhci_hcd_mtk *mtk)
 	if (!mtk->has_ippc)
 		return 0;
 
-	/* power down all u3 ports */
+	/* power down u3 ports except skipped ones */
 	for (i = 0; i < mtk->num_u3_ports; i++) {
+		if ((0x1 << i) & mtk->u3p_dis_msk)
+			continue;
+
 		value = readl(&ippc->u3_ctrl_p[i]);
 		value |= CTRL_U3_PORT_PDN;
 		writel(value, &ippc->u3_ctrl_p[i]);
@@ -208,6 +212,41 @@ static int xhci_mtk_ssusb_config(struct xhci_hcd_mtk *mtk)
 	return xhci_mtk_host_enable(mtk);
 }
 
+/* ignore the error if the clock does not exist */
+static struct clk *optional_clk_get(struct device *dev, const char *id)
+{
+	struct clk *opt_clk;
+
+	opt_clk = devm_clk_get(dev, id);
+	/* ignore error number except EPROBE_DEFER */
+	if (IS_ERR(opt_clk) && (PTR_ERR(opt_clk) != -EPROBE_DEFER))
+		opt_clk = NULL;
+
+	return opt_clk;
+}
+
+static int xhci_mtk_clks_get(struct xhci_hcd_mtk *mtk)
+{
+	struct device *dev = mtk->dev;
+
+	mtk->sys_clk = devm_clk_get(dev, "sys_ck");
+	if (IS_ERR(mtk->sys_clk)) {
+		dev_err(dev, "fail to get sys_ck\n");
+		return PTR_ERR(mtk->sys_clk);
+	}
+
+	mtk->ref_clk = optional_clk_get(dev, "ref_ck");
+	if (IS_ERR(mtk->ref_clk))
+		return PTR_ERR(mtk->ref_clk);
+
+	mtk->mcu_clk = optional_clk_get(dev, "mcu_ck");
+	if (IS_ERR(mtk->mcu_clk))
+		return PTR_ERR(mtk->mcu_clk);
+
+	mtk->dma_clk = optional_clk_get(dev, "dma_ck");
+	return PTR_ERR_OR_ZERO(mtk->dma_clk);
+}
+
 static int xhci_mtk_clks_enable(struct xhci_hcd_mtk *mtk)
 {
 	int ret;
@@ -224,37 +263,34 @@ static int xhci_mtk_clks_enable(struct xhci_hcd_mtk *mtk)
 		goto sys_clk_err;
 	}
 
-	if (mtk->wakeup_src) {
-		ret = clk_prepare_enable(mtk->wk_deb_p0);
-		if (ret) {
-			dev_err(mtk->dev, "failed to enable wk_deb_p0\n");
-			goto usb_p0_err;
-		}
+	ret = clk_prepare_enable(mtk->mcu_clk);
+	if (ret) {
+		dev_err(mtk->dev, "failed to enable mcu_clk\n");
+		goto mcu_clk_err;
+	}
 
-		ret = clk_prepare_enable(mtk->wk_deb_p1);
-		if (ret) {
-			dev_err(mtk->dev, "failed to enable wk_deb_p1\n");
-			goto usb_p1_err;
-		}
+	ret = clk_prepare_enable(mtk->dma_clk);
+	if (ret) {
+		dev_err(mtk->dev, "failed to enable dma_clk\n");
+		goto dma_clk_err;
 	}
+
 	return 0;
 
-usb_p1_err:
-	clk_disable_unprepare(mtk->wk_deb_p0);
-usb_p0_err:
+dma_clk_err:
+	clk_disable_unprepare(mtk->mcu_clk);
+mcu_clk_err:
 	clk_disable_unprepare(mtk->sys_clk);
 sys_clk_err:
 	clk_disable_unprepare(mtk->ref_clk);
 ref_clk_err:
-	return -EINVAL;
+	return ret;
 }
 
 static void xhci_mtk_clks_disable(struct xhci_hcd_mtk *mtk)
 {
-	if (mtk->wakeup_src) {
-		clk_disable_unprepare(mtk->wk_deb_p1);
-		clk_disable_unprepare(mtk->wk_deb_p0);
-	}
+	clk_disable_unprepare(mtk->dma_clk);
+	clk_disable_unprepare(mtk->mcu_clk);
 	clk_disable_unprepare(mtk->sys_clk);
 	clk_disable_unprepare(mtk->ref_clk);
 }
@@ -358,18 +394,6 @@ static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk,
 	if (!mtk->wakeup_src)
 		return 0;
 
-	mtk->wk_deb_p0 = devm_clk_get(dev, "wakeup_deb_p0");
-	if (IS_ERR(mtk->wk_deb_p0)) {
-		dev_err(dev, "fail to get wakeup_deb_p0\n");
-		return PTR_ERR(mtk->wk_deb_p0);
-	}
-
-	mtk->wk_deb_p1 = devm_clk_get(dev, "wakeup_deb_p1");
-	if (IS_ERR(mtk->wk_deb_p1)) {
-		dev_err(dev, "fail to get wakeup_deb_p1\n");
-		return PTR_ERR(mtk->wk_deb_p1);
-	}
-
 	mtk->pericfg = syscon_regmap_lookup_by_phandle(dn,
 						"mediatek,syscon-wakeup");
 	if (IS_ERR(mtk->pericfg)) {
@@ -492,7 +516,6 @@ static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci)
 /* called during probe() after chip reset completes */
 static int xhci_mtk_setup(struct usb_hcd *hcd)
 {
-	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 	struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
 	int ret;
 
@@ -507,8 +530,6 @@ static int xhci_mtk_setup(struct usb_hcd *hcd)
 		return ret;
 
 	if (usb_hcd_is_primary_hcd(hcd)) {
-		mtk->num_u3_ports = xhci->num_usb3_ports;
-		mtk->num_u2_ports = xhci->num_usb2_ports;
 		ret = xhci_mtk_sch_init(mtk);
 		if (ret)
 			return ret;
@@ -552,26 +573,14 @@ static int xhci_mtk_probe(struct platform_device *pdev)
 		return PTR_ERR(mtk->vusb33);
 	}
 
-	mtk->sys_clk = devm_clk_get(dev, "sys_ck");
-	if (IS_ERR(mtk->sys_clk)) {
-		dev_err(dev, "fail to get sys_ck\n");
-		return PTR_ERR(mtk->sys_clk);
-	}
-
-	/*
-	 * reference clock is usually a "fixed-clock", make it optional
-	 * for backward compatibility and ignore the error if it does
-	 * not exist.
-	 */
-	mtk->ref_clk = devm_clk_get(dev, "ref_ck");
-	if (IS_ERR(mtk->ref_clk)) {
-		if (PTR_ERR(mtk->ref_clk) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-
-		mtk->ref_clk = NULL;
-	}
+	ret = xhci_mtk_clks_get(mtk);
+	if (ret)
+		return ret;
 
 	mtk->lpm_support = of_property_read_bool(node, "usb3-lpm-capable");
+	/* optional property, ignore the error if it does not exist */
+	of_property_read_u32(node, "mediatek,u3p-dis-msk",
+			     &mtk->u3p_dis_msk);
 
 	ret = usb_wakeup_of_property_parse(mtk, node);
 	if (ret)
@@ -606,15 +615,10 @@ static int xhci_mtk_probe(struct platform_device *pdev)
 	}
 
 	/* Initialize dma_mask and coherent_dma_mask to 32-bits */
-	ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
+	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
 	if (ret)
 		goto disable_clk;
 
-	if (!dev->dma_mask)
-		dev->dma_mask = &dev->coherent_dma_mask;
-	else
-		dma_set_mask(dev, DMA_BIT_MASK(32));
-
 	hcd = usb_create_hcd(driver, dev, dev_name(dev));
 	if (!hcd) {
 		ret = -ENOMEM;
diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
index 3aa5e1d25064..6b74ce5b7564 100644
--- a/drivers/usb/host/xhci-mtk.h
+++ b/drivers/usb/host/xhci-mtk.h
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2015 MediaTek Inc.
  * Author:
  *  Zhigang.Wei <zhigang.wei@mediatek.com>
  *  Chunfeng.Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef _XHCI_MTK_H_
@@ -121,12 +112,13 @@ struct xhci_hcd_mtk {
 	bool has_ippc;
 	int num_u2_ports;
 	int num_u3_ports;
+	int u3p_dis_msk;
 	struct regulator *vusb33;
 	struct regulator *vbus;
 	struct clk *sys_clk;	/* sys and mac clock */
 	struct clk *ref_clk;
-	struct clk *wk_deb_p0;	/* port0's wakeup debounce clock */
-	struct clk *wk_deb_p1;
+	struct clk *mcu_clk;
+	struct clk *dma_clk;
 	struct regmap *pericfg;
 	struct phy **phys;
 	int num_phys;
diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c
index 85908a3ecb8f..32e158568788 100644
--- a/drivers/usb/host/xhci-mvebu.c
+++ b/drivers/usb/host/xhci-mvebu.c
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2014 Marvell
  * Author: Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
  */
 
 #include <linux/io.h>
diff --git a/drivers/usb/host/xhci-mvebu.h b/drivers/usb/host/xhci-mvebu.h
index 301fc984cae6..09791df2cec0 100644
--- a/drivers/usb/host/xhci-mvebu.h
+++ b/drivers/usb/host/xhci-mvebu.h
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2014 Marvell
  *
  * Gregory Clement <gregory.clement@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __LINUX_XHCI_MVEBU_H
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 76f392954733..7ef1274ef7f7 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * xHCI host controller driver PCI Bus Glue.
  *
@@ -5,19 +6,6 @@
  *
  * Author: Sarah Sharp
  * Some code borrowed from the Linux EHCI driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/pci.h>
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 1cb6eaef4ae1..09f164f8cf8c 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * xhci-plat.c - xHCI host controller driver platform Bus Glue.
  *
@@ -5,10 +6,6 @@
  * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
  *
  * A lot of code borrowed from the Linux xHCI driver.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
  */
 
 #include <linux/clk.h>
@@ -16,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/usb/phy.h>
 #include <linux/slab.h>
@@ -152,7 +150,7 @@ MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
 
 static int xhci_plat_probe(struct platform_device *pdev)
 {
-	const struct of_device_id *match;
+	const struct xhci_plat_priv *priv_match;
 	const struct hc_driver	*driver;
 	struct device		*sysdev;
 	struct xhci_hcd		*xhci;
@@ -242,9 +240,8 @@ static int xhci_plat_probe(struct platform_device *pdev)
 	}
 
 	xhci = hcd_to_xhci(hcd);
-	match = of_match_node(usb_xhci_of_match, pdev->dev.of_node);
-	if (match) {
-		const struct xhci_plat_priv *priv_match = match->data;
+	priv_match = of_device_get_match_data(&pdev->dev);
+	if (priv_match) {
 		struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
 
 		/* Just copy data for now */
@@ -263,6 +260,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
 		goto disable_clk;
 	}
 
+	if (device_property_read_bool(sysdev, "usb2-lpm-disable"))
+		xhci->quirks |= XHCI_HW_LPM_DISABLE;
+
 	if (device_property_read_bool(sysdev, "usb3-lpm-capable"))
 		xhci->quirks |= XHCI_LPM_SUPPORT;
 
diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h
index 29b227895b07..ae29f22ff5bd 100644
--- a/drivers/usb/host/xhci-plat.h
+++ b/drivers/usb/host/xhci-plat.h
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * xhci-plat.h - xHCI host controller driver platform Bus Glue.
  *
  * Copyright (C) 2015 Renesas Electronics Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
  */
 
 #ifndef _XHCI_PLAT_H
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index 198bc188ab25..f0b559660007 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * xHCI host controller driver for R-Car SoCs
  *
  * Copyright (C) 2014 Renesas Electronics Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
  */
 
 #include <linux/firmware.h>
diff --git a/drivers/usb/host/xhci-rcar.h b/drivers/usb/host/xhci-rcar.h
index d247951147a1..804b6ab4246f 100644
--- a/drivers/usb/host/xhci-rcar.h
+++ b/drivers/usb/host/xhci-rcar.h
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * drivers/usb/host/xhci-rcar.h
  *
  * Copyright (C) 2014 Renesas Electronics Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
  */
 
 #ifndef _XHCI_RCAR_H
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 82c746e2d85c..c239c688076c 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * xHCI host controller driver
  *
@@ -5,19 +6,6 @@
  *
  * Author: Sarah Sharp
  * Some code borrowed from the Linux EHCI driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 /*
@@ -171,13 +159,13 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring)
 	if (ring->type == TYPE_EVENT) {
 		if (!last_trb_on_seg(ring->deq_seg, ring->dequeue)) {
 			ring->dequeue++;
-			return;
+			goto out;
 		}
 		if (last_trb_on_ring(ring, ring->deq_seg, ring->dequeue))
 			ring->cycle_state ^= 1;
 		ring->deq_seg = ring->deq_seg->next;
 		ring->dequeue = ring->deq_seg->trbs;
-		return;
+		goto out;
 	}
 
 	/* All other rings have link trbs */
@@ -190,6 +178,7 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring)
 		ring->dequeue = ring->deq_seg->trbs;
 	}
 
+out:
 	trace_xhci_inc_deq(ring);
 
 	return;
@@ -946,15 +935,12 @@ void xhci_hc_died(struct xhci_hcd *xhci)
  * Instead we use a combination of that flag and checking if a new timer is
  * pending.
  */
-void xhci_stop_endpoint_command_watchdog(unsigned long arg)
+void xhci_stop_endpoint_command_watchdog(struct timer_list *t)
 {
-	struct xhci_hcd *xhci;
-	struct xhci_virt_ep *ep;
+	struct xhci_virt_ep *ep = from_timer(ep, t, stop_cmd_timer);
+	struct xhci_hcd *xhci = ep->xhci;
 	unsigned long flags;
 
-	ep = (struct xhci_virt_ep *) arg;
-	xhci = ep->xhci;
-
 	spin_lock_irqsave(&xhci->lock, flags);
 
 	/* bail out if cmd completed but raced with stop ep watchdog timer.*/
@@ -1680,9 +1666,14 @@ static void handle_port_status(struct xhci_hcd *xhci,
 			bus_state->resume_done[faked_port_index] = jiffies +
 				msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			set_bit(faked_port_index, &bus_state->resuming_ports);
+			/* Do the rest in GetPortStatus after resume time delay.
+			 * Avoid polling roothub status before that so that a
+			 * usb device auto-resume latency around ~40ms.
+			 */
+			set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 			mod_timer(&hcd->rh_timer,
 				  bus_state->resume_done[faked_port_index]);
-			/* Do the rest in GetPortStatus */
+			bogus_port_status = true;
 		}
 	}
 
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index 74436f8ca538..2c076ea80522 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * NVIDIA Tegra xHCI host controller driver
  *
  * Copyright (C) 2014 NVIDIA Corporation
  * Copyright (C) 2014 Google, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
  */
 
 #include <linux/clk.h>
@@ -771,7 +768,7 @@ static int tegra_xusb_load_firmware(struct tegra_xusb *tegra)
 	struct device *dev = tegra->dev;
 	const struct firmware *fw;
 	unsigned long timeout;
-	time_t timestamp;
+	time64_t timestamp;
 	struct tm time;
 	u64 address;
 	u32 value;
@@ -877,7 +874,7 @@ static int tegra_xusb_load_firmware(struct tegra_xusb *tegra)
 	}
 
 	timestamp = le32_to_cpu(header->fwimg_created_time);
-	time_to_tm(timestamp, 0, &time);
+	time64_to_tm(timestamp, 0, &time);
 
 	dev_info(dev, "Firmware timestamp: %ld-%02d-%02d %02d:%02d:%02d UTC\n",
 		 time.tm_year + 1900, time.tm_mon + 1, time.tm_mday,
diff --git a/drivers/usb/host/xhci-trace.c b/drivers/usb/host/xhci-trace.c
index 367b630bdb3c..d0070814d1ea 100644
--- a/drivers/usb/host/xhci-trace.c
+++ b/drivers/usb/host/xhci-trace.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * xHCI host controller driver
  *
@@ -5,10 +6,6 @@
  *
  * Author: Xenia Ragiadakou
  * Email : burzalodowa@gmail.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #define CREATE_TRACE_POINTS
diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h
index f20753b99624..a3b57c781db1 100644
--- a/drivers/usb/host/xhci-trace.h
+++ b/drivers/usb/host/xhci-trace.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * xHCI host controller driver
  *
@@ -5,10 +6,6 @@
  *
  * Author: Xenia Ragiadakou
  * Email : burzalodowa@gmail.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #undef TRACE_SYSTEM
@@ -388,6 +385,11 @@ DEFINE_EVENT(xhci_log_slot_ctx, xhci_handle_cmd_set_deq,
 	TP_ARGS(ctx)
 );
 
+DEFINE_EVENT(xhci_log_slot_ctx, xhci_configure_endpoint,
+	TP_PROTO(struct xhci_slot_ctx *ctx),
+	TP_ARGS(ctx)
+);
+
 DECLARE_EVENT_CLASS(xhci_log_ring,
 	TP_PROTO(struct xhci_ring *ring),
 	TP_ARGS(ring),
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 51535ba2bcd4..327ba8b8a98b 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * xHCI host controller driver
  *
@@ -5,19 +6,6 @@
  *
  * Author: Sarah Sharp
  * Some code borrowed from the Linux EHCI driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/pci.h>
@@ -32,6 +20,7 @@
 #include "xhci.h"
 #include "xhci-trace.h"
 #include "xhci-mtk.h"
+#include "xhci-debugfs.h"
 
 #define DRIVER_AUTHOR "Sarah Sharp"
 #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
@@ -632,6 +621,9 @@ int xhci_run(struct usb_hcd *hcd)
 	}
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
 			"Finished xhci_run for USB2 roothub");
+
+	xhci_debugfs_init(xhci);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(xhci_run);
@@ -660,6 +652,8 @@ static void xhci_stop(struct usb_hcd *hcd)
 		return;
 	}
 
+	xhci_debugfs_exit(xhci);
+
 	spin_lock_irq(&xhci->lock);
 	xhci->xhc_state |= XHCI_STATE_HALTED;
 	xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
@@ -1600,6 +1594,8 @@ static int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	ctrl_ctx->add_flags &= cpu_to_le32(~drop_flag);
 	new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
 
+	xhci_debugfs_remove_endpoint(xhci, xhci->devs[udev->slot_id], ep_index);
+
 	xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
 
 	if (xhci->quirks & XHCI_MTK_HOST)
@@ -1723,6 +1719,8 @@ static int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	/* Store the usb_device pointer for later use */
 	ep->hcpriv = udev;
 
+	xhci_debugfs_create_endpoint(xhci, virt_dev, ep_index);
+
 	xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
 			(unsigned int) ep->desc.bEndpointAddress,
 			udev->slot_id,
@@ -2555,6 +2553,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 	unsigned long flags;
 	struct xhci_input_control_ctx *ctrl_ctx;
 	struct xhci_virt_device *virt_dev;
+	struct xhci_slot_ctx *slot_ctx;
 
 	if (!command)
 		return -EINVAL;
@@ -2593,6 +2592,9 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 		return -ENOMEM;
 	}
 
+	slot_ctx = xhci_get_slot_ctx(xhci, command->in_ctx);
+	trace_xhci_configure_endpoint(slot_ctx);
+
 	if (!ctx_change)
 		ret = xhci_queue_configure_endpoint(xhci, command,
 				command->in_ctx->dma,
@@ -2773,6 +2775,7 @@ static void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 	/* Free any rings allocated for added endpoints */
 	for (i = 0; i < 31; i++) {
 		if (virt_dev->eps[i].new_ring) {
+			xhci_debugfs_remove_endpoint(xhci, virt_dev, i);
 			xhci_ring_free(xhci, virt_dev->eps[i].new_ring);
 			virt_dev->eps[i].new_ring = NULL;
 		}
@@ -3488,6 +3491,7 @@ static int xhci_discover_or_reset_device(struct usb_hcd *hcd,
 		}
 
 		if (ep->ring) {
+			xhci_debugfs_remove_endpoint(xhci, virt_dev, i);
 			xhci_free_endpoint_ring(xhci, virt_dev, i);
 			last_freed_endpoint = i;
 		}
@@ -3520,11 +3524,8 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
 	struct xhci_virt_device *virt_dev;
 	struct xhci_slot_ctx *slot_ctx;
 	int i, ret;
-	struct xhci_command *command;
 
-	command = xhci_alloc_command(xhci, false, false, GFP_KERNEL);
-	if (!command)
-		return;
+	xhci_debugfs_remove_slot(xhci, udev->slot_id);
 
 #ifndef CONFIG_USB_DEFAULT_PERSIST
 	/*
@@ -3540,10 +3541,8 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
 	/* If the host is halted due to driver unload, we still need to free the
 	 * device.
 	 */
-	if (ret <= 0 && ret != -ENODEV) {
-		kfree(command);
+	if (ret <= 0 && ret != -ENODEV)
 		return;
-	}
 
 	virt_dev = xhci->devs[udev->slot_id];
 	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
@@ -3555,26 +3554,19 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
 		del_timer_sync(&virt_dev->eps[i].stop_cmd_timer);
 	}
 
-	xhci_disable_slot(xhci, command, udev->slot_id);
-	/*
-	 * Event command completion handler will free any data structures
-	 * associated with the slot.  XXX Can free sleep?
-	 */
+	ret = xhci_disable_slot(xhci, udev->slot_id);
+	if (ret)
+		xhci_free_virt_device(xhci, udev->slot_id);
 }
 
-int xhci_disable_slot(struct xhci_hcd *xhci, struct xhci_command *command,
-			u32 slot_id)
+int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id)
 {
+	struct xhci_command *command;
 	unsigned long flags;
 	u32 state;
 	int ret = 0;
-	struct xhci_virt_device *virt_dev;
 
-	virt_dev = xhci->devs[slot_id];
-	if (!virt_dev)
-		return -EINVAL;
-	if (!command)
-		command = xhci_alloc_command(xhci, false, false, GFP_KERNEL);
+	command = xhci_alloc_command(xhci, false, false, GFP_KERNEL);
 	if (!command)
 		return -ENOMEM;
 
@@ -3583,17 +3575,16 @@ int xhci_disable_slot(struct xhci_hcd *xhci, struct xhci_command *command,
 	state = readl(&xhci->op_regs->status);
 	if (state == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING) ||
 			(xhci->xhc_state & XHCI_STATE_HALTED)) {
-		xhci_free_virt_device(xhci, slot_id);
 		spin_unlock_irqrestore(&xhci->lock, flags);
 		kfree(command);
-		return ret;
+		return -ENODEV;
 	}
 
 	ret = xhci_queue_slot_control(xhci, command, TRB_DISABLE_SLOT,
 				slot_id);
 	if (ret) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
-		xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+		kfree(command);
 		return ret;
 	}
 	xhci_ring_cmd_db(xhci);
@@ -3641,13 +3632,10 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
 	if (!command)
 		return 0;
 
-	/* xhci->slot_id and xhci->addr_dev are not thread-safe */
-	mutex_lock(&xhci->mutex);
 	spin_lock_irqsave(&xhci->lock, flags);
 	ret = xhci_queue_slot_control(xhci, command, TRB_ENABLE_SLOT, 0);
 	if (ret) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
-		mutex_unlock(&xhci->mutex);
 		xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
 		xhci_free_command(xhci, command);
 		return 0;
@@ -3657,7 +3645,6 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
 
 	wait_for_completion(command->completion);
 	slot_id = command->slot_id;
-	mutex_unlock(&xhci->mutex);
 
 	if (!slot_id || command->status != COMP_SUCCESS) {
 		xhci_err(xhci, "Error while assigning device slot ID\n");
@@ -3668,6 +3655,8 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
 		return 0;
 	}
 
+	xhci_free_command(xhci, command);
+
 	if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
 		spin_lock_irqsave(&xhci->lock, flags);
 		ret = xhci_reserve_host_control_ep_resources(xhci);
@@ -3694,6 +3683,8 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
 
 	udev->slot_id = slot_id;
 
+	xhci_debugfs_create_slot(xhci, slot_id);
+
 #ifndef CONFIG_USB_DEFAULT_PERSIST
 	/*
 	 * If resetting upon resume, we can't put the controller into runtime
@@ -3703,18 +3694,16 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
 		pm_runtime_get_noresume(hcd->self.controller);
 #endif
 
-
-	xhci_free_command(xhci, command);
 	/* Is this a LS or FS device under a HS hub? */
 	/* Hub or peripherial? */
 	return 1;
 
 disable_slot:
-	/* Disable slot, if we can do it without mem alloc */
-	kfree(command->completion);
-	command->completion = NULL;
-	command->status = 0;
-	return xhci_disable_slot(xhci, command, udev->slot_id);
+	ret = xhci_disable_slot(xhci, udev->slot_id);
+	if (ret)
+		xhci_free_virt_device(xhci, udev->slot_id);
+
+	return 0;
 }
 
 /*
@@ -3838,8 +3827,14 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 		break;
 	case COMP_USB_TRANSACTION_ERROR:
 		dev_warn(&udev->dev, "Device not responding to setup %s.\n", act);
-		ret = -EPROTO;
-		break;
+
+		mutex_unlock(&xhci->mutex);
+		ret = xhci_disable_slot(xhci, udev->slot_id);
+		if (!ret)
+			xhci_alloc_dev(hcd, udev);
+		kfree(command->completion);
+		kfree(command);
+		return -EPROTO;
 	case COMP_INCOMPATIBLE_DEVICE_ERROR:
 		dev_warn(&udev->dev,
 			 "ERROR: Incompatible device for setup %s command\n", act);
@@ -4088,7 +4083,7 @@ static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
 	xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",
 			enable ? "enable" : "disable", port_num + 1);
 
-	if (enable) {
+	if (enable && !(xhci->quirks & XHCI_HW_LPM_DISABLE)) {
 		/* Host supports BESL timeout instead of HIRD */
 		if (udev->usb2_hw_lpm_besl_capable) {
 			/* if device doesn't have a preferred BESL value use a
@@ -4287,6 +4282,7 @@ static unsigned long long xhci_calculate_intel_u1_timeout(
 			break;
 		}
 		/* Otherwise the calculation is the same as isoc eps */
+		/* fall through */
 	case USB_ENDPOINT_XFER_ISOC:
 		timeout_ns = xhci_service_interval_to_ns(desc);
 		timeout_ns = DIV_ROUND_UP_ULL(timeout_ns * 105, 100);
@@ -5005,6 +5001,8 @@ static int __init xhci_hcd_init(void)
 	if (usb_disabled())
 		return -ENODEV;
 
+	xhci_debugfs_create_root();
+
 	return 0;
 }
 
@@ -5012,7 +5010,10 @@ static int __init xhci_hcd_init(void)
  * If an init function is provided, an exit function must also be provided
  * to allow module unload.
  */
-static void __exit xhci_hcd_fini(void) { }
+static void __exit xhci_hcd_fini(void)
+{
+	xhci_debugfs_remove_root();
+}
 
 module_init(xhci_hcd_init);
 module_exit(xhci_hcd_fini);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 2b48aa4f6b76..99a014a920d3 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 
 /*
  * xHCI host controller driver
@@ -6,19 +7,6 @@
  *
  * Author: Sarah Sharp
  * Some code borrowed from the Linux EHCI driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #ifndef __LINUX_XHCI_HCD_H
@@ -131,6 +119,8 @@ struct xhci_cap_regs {
 /* Extended Capabilities pointer from PCI base - section 5.3.6 */
 #define HCC_EXT_CAPS(p)		XHCI_HCC_EXT_CAPS(p)
 
+#define CTX_SIZE(_hcc)		(HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
+
 /* db_off bitmask - bits 0:1 reserved */
 #define	DBOFF_MASK	(~0x3)
 
@@ -1007,6 +997,8 @@ struct xhci_virt_device {
 	struct xhci_tt_bw_info		*tt_info;
 	/* The current max exit latency for the enabled USB3 link states. */
 	u16				current_mel;
+	/* Used for the debugfs interfaces. */
+	void				*debugfs_private;
 };
 
 /*
@@ -1830,6 +1822,7 @@ struct xhci_hcd {
 #define XHCI_LIMIT_ENDPOINT_INTERVAL_7	(1 << 26)
 /* Reserved. It was XHCI_U2_DISABLE_WAKE */
 #define XHCI_ASMEDIA_MODIFY_FLOWCONTROL	(1 << 28)
+#define XHCI_HW_LPM_DISABLE	(1 << 29)
 
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
@@ -1859,6 +1852,10 @@ struct xhci_hcd {
 /* Compliance Mode Timer Triggered every 2 seconds */
 #define COMP_MODE_RCVRY_MSECS 2000
 
+	struct dentry		*debugfs_root;
+	struct dentry		*debugfs_slots;
+	struct list_head	regset_list;
+
 	/* platform-specific data -- must come last */
 	unsigned long		priv[0] __aligned(sizeof(s64));
 };
@@ -2012,8 +2009,7 @@ int xhci_run(struct usb_hcd *hcd);
 int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
 void xhci_init_driver(struct hc_driver *drv,
 		      const struct xhci_driver_overrides *over);
-int xhci_disable_slot(struct xhci_hcd *xhci,
-			struct xhci_command *command, u32 slot_id);
+int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id);
 
 int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup);
 int xhci_resume(struct xhci_hcd *xhci, bool hibernated);
@@ -2068,7 +2064,7 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
 		struct xhci_dequeue_state *deq_state);
 void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int ep_index,
 		unsigned int stream_id, struct xhci_td *td);
-void xhci_stop_endpoint_command_watchdog(unsigned long arg);
+void xhci_stop_endpoint_command_watchdog(struct timer_list *t);
 void xhci_handle_command_timeout(struct work_struct *work);
 
 void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
@@ -2107,6 +2103,7 @@ struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container
 struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
 		unsigned int slot_id, unsigned int ep_index,
 		unsigned int stream_id);
+
 static inline struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
 								struct urb *urb)
 {
@@ -2442,11 +2439,12 @@ static inline const char *xhci_decode_portsc(u32 portsc)
 	static char str[256];
 	int ret;
 
-	ret = sprintf(str, "%s %s %s Link:%s ",
+	ret = sprintf(str, "%s %s %s Link:%s PortSpeed:%d ",
 		      portsc & PORT_POWER	? "Powered" : "Powered-off",
 		      portsc & PORT_CONNECT	? "Connected" : "Not-connected",
 		      portsc & PORT_PE		? "Enabled" : "Disabled",
-		      xhci_portsc_link_state_string(portsc));
+		      xhci_portsc_link_state_string(portsc),
+		      DEV_PORT_SPEED(portsc));
 
 	if (portsc & PORT_OC)
 		ret += sprintf(str + ret, "OverCurrent ");
diff --git a/drivers/usb/image/Makefile b/drivers/usb/image/Makefile
index 4148ae306352..8997c81ba86b 100644
--- a/drivers/usb/image/Makefile
+++ b/drivers/usb/image/Makefile
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # Makefile for USB Image drivers
 #
diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c
index e92540a21b6b..2388674042a9 100644
--- a/drivers/usb/image/mdc800.c
+++ b/drivers/usb/image/mdc800.c
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * copyright (C) 1999/2000 by Henning Zabel <henning@uni-paderborn.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 
@@ -893,6 +880,7 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s
 						return -EIO;
 					}
 					mdc800->pic_len=-1;
+					/* fall through */
 
 				case 0x09: /* Download Thumbnail */
 					mdc800->download_left=answersize+64;
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index 0b21ba757bba..9f2f563c82ed 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /* Driver for Microtek Scanmaker X6 USB scanner, and possibly others.
  *
  * (C) Copyright 2000 John Fremlin <vii@penguinpowered.com>
diff --git a/drivers/usb/isp1760/Makefile b/drivers/usb/isp1760/Makefile
index 2b741074ad2b..9bb09e8290c4 100644
--- a/drivers/usb/isp1760/Makefile
+++ b/drivers/usb/isp1760/Makefile
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 isp1760-y := isp1760-core.o isp1760-if.o
 isp1760-$(CONFIG_USB_ISP1760_HCD) += isp1760-hcd.o
 isp1760-$(CONFIG_USB_ISP1761_UDC) += isp1760-udc.o
diff --git a/drivers/usb/isp1760/isp1760-core.c b/drivers/usb/isp1760/isp1760-core.c
index bfa402cf3a27..05d22589b5cc 100644
--- a/drivers/usb/isp1760/isp1760-core.c
+++ b/drivers/usb/isp1760/isp1760-core.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for the NXP ISP1760 chip
  *
@@ -7,10 +8,6 @@
  * Contacts:
  *	Sebastian Siewior <bigeasy@linutronix.de>
  *	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
  */
 
 #include <linux/delay.h>
diff --git a/drivers/usb/isp1760/isp1760-core.h b/drivers/usb/isp1760/isp1760-core.h
index c70f8368a794..97cb4d7a3e1c 100644
--- a/drivers/usb/isp1760/isp1760-core.h
+++ b/drivers/usb/isp1760/isp1760-core.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for the NXP ISP1760 chip
  *
@@ -7,10 +8,6 @@
  * Contacts:
  *	Sebastian Siewior <bigeasy@linutronix.de>
  *	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
  */
 
 #ifndef _ISP1760_CORE_H_
diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c
index bb4d6d959871..42672d6ec525 100644
--- a/drivers/usb/isp1760/isp1760-hcd.c
+++ b/drivers/usb/isp1760/isp1760-hcd.c
@@ -1259,10 +1259,11 @@ leave:
 #define SLOT_TIMEOUT 300
 #define SLOT_CHECK_PERIOD 200
 static struct timer_list errata2_timer;
+static struct usb_hcd *errata2_timer_hcd;
 
-static void errata2_function(unsigned long data)
+static void errata2_function(struct timer_list *unused)
 {
-	struct usb_hcd *hcd = (struct usb_hcd *) data;
+	struct usb_hcd *hcd = errata2_timer_hcd;
 	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 	int slot;
 	struct ptd ptd;
@@ -1334,7 +1335,8 @@ static int isp1760_run(struct usb_hcd *hcd)
 	if (retval)
 		return retval;
 
-	setup_timer(&errata2_timer, errata2_function, (unsigned long)hcd);
+	errata2_timer_hcd = hcd;
+	timer_setup(&errata2_timer, errata2_function, 0);
 	errata2_timer.expires = jiffies + msecs_to_jiffies(SLOT_CHECK_PERIOD);
 	add_timer(&errata2_timer);
 
diff --git a/drivers/usb/isp1760/isp1760-regs.h b/drivers/usb/isp1760/isp1760-regs.h
index b67095c9a9d4..1f00c3850cf7 100644
--- a/drivers/usb/isp1760/isp1760-regs.h
+++ b/drivers/usb/isp1760/isp1760-regs.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for the NXP ISP1760 chip
  *
@@ -7,10 +8,6 @@
  * Contacts:
  *     Sebastian Siewior <bigeasy@linutronix.de>
  *     Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
  */
 
 #ifndef _ISP1760_REGS_H_
diff --git a/drivers/usb/isp1760/isp1760-udc.c b/drivers/usb/isp1760/isp1760-udc.c
index 69400f3da886..bac4ef5d9512 100644
--- a/drivers/usb/isp1760/isp1760-udc.c
+++ b/drivers/usb/isp1760/isp1760-udc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for the NXP ISP1761 device controller
  *
@@ -5,10 +6,6 @@
  *
  * Contacts:
  *	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
  */
 
 #include <linux/interrupt.h>
@@ -1331,9 +1328,9 @@ static irqreturn_t isp1760_udc_irq(int irq, void *dev)
 	return status ? IRQ_HANDLED : IRQ_NONE;
 }
 
-static void isp1760_udc_vbus_poll(unsigned long data)
+static void isp1760_udc_vbus_poll(struct timer_list *t)
 {
-	struct isp1760_udc *udc = (struct isp1760_udc *)data;
+	struct isp1760_udc *udc = from_timer(udc, t, vbus_timer);
 	unsigned long flags;
 
 	spin_lock_irqsave(&udc->lock, flags);
@@ -1452,8 +1449,7 @@ int isp1760_udc_register(struct isp1760_device *isp, int irq,
 	udc->regs = isp->regs;
 
 	spin_lock_init(&udc->lock);
-	setup_timer(&udc->vbus_timer, isp1760_udc_vbus_poll,
-		    (unsigned long)udc);
+	timer_setup(&udc->vbus_timer, isp1760_udc_vbus_poll, 0);
 
 	ret = isp1760_udc_init(udc);
 	if (ret < 0)
diff --git a/drivers/usb/isp1760/isp1760-udc.h b/drivers/usb/isp1760/isp1760-udc.h
index 26899ed81145..2d0b88747701 100644
--- a/drivers/usb/isp1760/isp1760-udc.h
+++ b/drivers/usb/isp1760/isp1760-udc.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for the NXP ISP1761 device controller
  *
@@ -5,10 +6,6 @@
  *
  * Contacts:
  *	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
  */
 
 #ifndef _ISP1760_UDC_H_
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 0f9f25db9163..68d2f2cd17dd 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -238,8 +238,8 @@ config USB_HUB_USB251XB
 	depends on I2C
 	help
 	  This option enables support for configuration via SMBus of the
-	  Microchip USB251xB/xBi USB 2.0 Hub Controller series.
-	  Configuration parameters may be set in devicetree or platform data.
+	  Microchip USB251x/xBi USB 2.0 Hub Controller series. Configuration
+	  parameters may be set in devicetree or platform data.
 	  Say Y or M here if you need to configure such a device via SMBus.
 
 config USB_HSIC_USB3503
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index 1c0ada75c35d..4b8712733fc7 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * adutux - driver for ADU devices from Ontrak Control Systems
  * This is an experimental driver. Use at your own risk.
@@ -5,11 +6,6 @@
  *
  * Copyright (c) 2003 John Homppi (SCO, leave this notice here)
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
  * derived from the Lego USB Tower driver 0.56:
  * Copyright (c) 2003 David Glance <davidgsf@sourceforge.net>
  *               2001 Juergen Stuber <stuber@loria.fr>
@@ -761,13 +757,11 @@ error:
 static void adu_disconnect(struct usb_interface *interface)
 {
 	struct adu_device *dev;
-	int minor;
 
 	dev = usb_get_intfdata(interface);
 
 	mutex_lock(&dev->mtx);	/* not interruptible */
 	dev->udev = NULL;	/* poison */
-	minor = dev->minor;
 	usb_deregister_dev(interface, &adu_class);
 	mutex_unlock(&dev->mtx);
 
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index 8efdc500e790..b3eb8b989bd4 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -1,23 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Apple Cinema Display driver
  *
  * Copyright (C) 2006  Michael Hanselmann (linux-kernel@hansmi.ch)
  *
  * Thanks to Caskey L. Dickson for his work with acdctl.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/misc/chaoskey.c b/drivers/usb/misc/chaoskey.c
index abec6e604a62..b6a1b9331aa0 100644
--- a/drivers/usb/misc/chaoskey.c
+++ b/drivers/usb/misc/chaoskey.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * chaoskey - driver for ChaosKey device from Altus Metrum.
  *
@@ -11,15 +12,6 @@
  * bit stream.
  *
  * Copyright © 2015 Keith Packard <keithp@keithp.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU
- * General Public License for more details.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
index 5c93a888c40e..bf4d2778907e 100644
--- a/drivers/usb/misc/cypress_cy7c63.c
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
 * cypress_cy7c63.c
 *
@@ -23,10 +24,6 @@
 *
 *	For up-to-date information please visit:
 *	http://www.obock.de/kernel/cypress
-*
-*	This program is free software; you can redistribute it and/or
-*	modify it under the terms of the GNU General Public License as
-*	published by the Free Software Foundation, version 2.
 */
 
 #include <linux/module.h>
diff --git a/drivers/usb/misc/cytherm.c b/drivers/usb/misc/cytherm.c
index 63207c42acf6..66be86077292 100644
--- a/drivers/usb/misc/cytherm.c
+++ b/drivers/usb/misc/cytherm.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /* -*- linux-c -*-
  * Cypress USB Thermometer driver 
  * 
@@ -6,11 +7,6 @@
  * This driver works with Elektor magazine USB Interface as published in 
  * issue #291. It should also work with the original starter kit/demo board
  * from Cypress.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation, version 2.
- *
  */
 
 
diff --git a/drivers/usb/misc/ehset.c b/drivers/usb/misc/ehset.c
index c31b4a33e6bb..7895d61e733b 100644
--- a/drivers/usb/misc/ehset.c
+++ b/drivers/usb/misc/ehset.c
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2010-2013, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index 8950fa5e973d..24d841850e05 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /* 
  * Emagic EMI 2|6 usb audio interface firmware loader.
  * Copyright (C) 2002
  * 	Tapio Laxström (tapio.laxstrom@iptime.fi)
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, as published by
- * the Free Software Foundation, version 2.
- * 
  * emi26.c,v 1.13 2002/03/08 13:10:26 tapio Exp
  */
 #include <linux/kernel.h>
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 1d9be4431b72..3eea60437f56 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /* 
  * Emagic EMI 2|6 usb audio interface firmware loader.
  * Copyright (C) 2002
  * 	Tapio Laxström (tapio.laxstrom@iptime.fi)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, as published by
- * the Free Software Foundation, version 2.
  */
 #include <linux/kernel.h>
 #include <linux/errno.h>
diff --git a/drivers/usb/misc/ezusb.c b/drivers/usb/misc/ezusb.c
index 837208f14f86..f058d8029761 100644
--- a/drivers/usb/misc/ezusb.c
+++ b/drivers/usb/misc/ezusb.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * EZ-USB specific functions used by some of the USB to Serial drivers.
  *
  * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License version
- *	2 as published by the Free Software Foundation.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 424ff12f3b51..76c718ac8c78 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB FTDI client driver for Elan Digital Systems's Uxxx adapters
  *
@@ -7,11 +8,6 @@
  * Author and Maintainer - Tony Olech - Elan Digital Systems
  * tony.olech@elandigitalsystems.com
  *
- * This program is free software;you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation, version 2.
- *
- *
  * This driver was written by Tony Olech(tony.olech@elandigitalsystems.com)
  * based on various USB client drivers in the 2.6.15 linux kernel
  * with constant reference to the 3rd Edition of Linux Device Drivers
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index 39d8fedfaf3b..20b0f91a5d9b 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -1,10 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /* Siemens ID Mouse driver v0.6
 
-  This program is free software; you can redistribute it and/or
-  modify it under the terms of the GNU General Public License as
-  published by the Free Software Foundation; either version 2 of
-  the License, or (at your option) any later version.
-
   Copyright (C) 2004-5 by Florian 'Floe' Echtler  <echtler@fs.tum.de>
                       and Andreas  'ad'  Deresch <aderesch@fs.tum.de>
 
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index be5881303681..ad3109490c0f 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  Native support for the I/O-Warrior USB devices
  *
diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c
index 1c61830e96f9..4d30095d6ad2 100644
--- a/drivers/usb/misc/isight_firmware.c
+++ b/drivers/usb/misc/isight_firmware.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for loading USB isight firmware
  *
  * Copyright (C) 2008 Matthew Garrett <mjg@redhat.com>
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation, version 2.
- *
  * The USB isight cameras in recent Apples are roughly compatible with the USB
  * video class specification, and can be driven by uvcvideo. However, they
  * need firmware to be loaded beforehand. After firmware loading, the device
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 680bddb3ce05..5c1a3b852453 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /**
  * Generic USB driver for report based interrupt in/out devices
  * like LD Didactic's USB devices. LD Didactic's USB devices are
@@ -12,11 +13,6 @@
  *
  * Copyright (C) 2005 Michael Hund <mhund@ld-didactic.de>
  *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation; either version 2 of
- *	the License, or (at your option) any later version.
- *
  * Derived from Lego USB Tower driver
  * Copyright (C) 2003 David Glance <advidgsf@sourceforge.net>
  *		 2001-2004 Juergen Stuber <starblue@users.sourceforge.net>
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 5628f678ab59..c5be6e9e24a5 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * LEGO USB Tower driver
  *
  * Copyright (C) 2003 David Glance <davidgsf@sourceforge.net>
  *               2001-2004 Juergen Stuber <starblue@users.sourceforge.net>
  *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation; either version 2 of
- *	the License, or (at your option) any later version.
- *
  * derived from USB Skeleton driver - 0.5
  * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
  *
diff --git a/drivers/usb/misc/lvstest.c b/drivers/usb/misc/lvstest.c
index ddddd6387f66..e5c03c6d16e9 100644
--- a/drivers/usb/misc/lvstest.c
+++ b/drivers/usb/misc/lvstest.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * drivers/usb/misc/lvstest.c
  *
@@ -5,10 +6,6 @@
  *
  * Copyright (C) 2014 ST Microelectronics
  * Pratyush Anand <pratyush.anand@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/init.h>
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index ddfebb144aaa..7b9adeb3e7aa 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /* -*- linux-c -*- */
 
 /* 
@@ -6,20 +7,6 @@
  * Cesar Miquel (miquel@df.uba.ar)
  * 
  * based on hp_scanner.c by David E. Nelson (dnelson@jump.net)
- * 
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  * Based upon mouse.c (Brad Keryan) and printer.c (Michael Gee).
  *
diff --git a/drivers/usb/misc/rio500_usb.h b/drivers/usb/misc/rio500_usb.h
index 359abc98e706..6db7a5863496 100644
--- a/drivers/usb/misc/rio500_usb.h
+++ b/drivers/usb/misc/rio500_usb.h
@@ -1,25 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*  ----------------------------------------------------------------------
-
     Copyright (C) 2000  Cesar Miquel  (miquel@df.uba.ar)
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
     ---------------------------------------------------------------------- */
 
-
-
 #define RIO_SEND_COMMAND			0x1
 #define RIO_RECV_COMMAND			0x2
 
diff --git a/drivers/usb/misc/sisusbvga/Makefile b/drivers/usb/misc/sisusbvga/Makefile
index 3142476ccc8e..6ed3a638261a 100644
--- a/drivers/usb/misc/sisusbvga/Makefile
+++ b/drivers/usb/misc/sisusbvga/Makefile
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # Makefile for the sisusb driver (if driver is inside kernel tree).
 #
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 30774e0aeadd..3e65bdc2615c 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 /*
  * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles
  *
diff --git a/drivers/usb/misc/sisusbvga/sisusb.h b/drivers/usb/misc/sisusbvga/sisusb.h
index 55492a5930bd..20f03ad0ea16 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.h
+++ b/drivers/usb/misc/sisusbvga/sisusb.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 /*
  * sisusb - usb kernel driver for Net2280/SiS315 based USB2VGA dongles
  *
diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c
index f019d80ca9e4..73f7bde78e11 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_con.c
+++ b/drivers/usb/misc/sisusbvga/sisusb_con.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 /*
  * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles
  *
diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.c b/drivers/usb/misc/sisusbvga/sisusb_init.c
index bf0032ca35ed..6a30e8bd9221 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_init.c
+++ b/drivers/usb/misc/sisusbvga/sisusb_init.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 /*
  * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles
  *
diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.h b/drivers/usb/misc/sisusbvga/sisusb_init.h
index e79a616f0d26..1782c759c4ad 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_init.h
+++ b/drivers/usb/misc/sisusbvga/sisusb_init.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /* $XFree86$ */
 /* $XdotOrg$ */
 /*
diff --git a/drivers/usb/misc/sisusbvga/sisusb_struct.h b/drivers/usb/misc/sisusbvga/sisusb_struct.h
index 1c4240e802c1..706d77090e00 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_struct.h
+++ b/drivers/usb/misc/sisusbvga/sisusb_struct.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * General structure definitions for universal mode switching modules
  *
diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c
index 1862ed15ce28..d83af2a332e4 100644
--- a/drivers/usb/misc/trancevibrator.c
+++ b/drivers/usb/misc/trancevibrator.c
@@ -1,21 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * PlayStation 2 Trance Vibrator driver
  *
  * Copyright (C) 2006 Sam Hocevar <sam@zoy.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 /* Standard include files */
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 135c91c434bf..a6efb9a72939 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for Microchip USB251xB USB 2.0 Hi-Speed Hub Controller
  * Configuration via SMBus.
@@ -7,25 +8,14 @@
  * This work is based on the USB3503 driver by Dongjin Kim and
  * a not-accepted patch by Fabien Lahoudere, see:
  * https://patchwork.kernel.org/patch/9257715/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/nls.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 #include <linux/slab.h>
 
 /* Internal Register Set Addresses & Default Values acc. to DS00001692C */
@@ -38,6 +28,7 @@
 #define USB251XB_DEF_PRODUCT_ID_12	0x2512 /* USB2512B/12Bi */
 #define USB251XB_DEF_PRODUCT_ID_13	0x2513 /* USB2513B/13Bi */
 #define USB251XB_DEF_PRODUCT_ID_14	0x2514 /* USB2514B/14Bi */
+#define USB251XB_DEF_PRODUCT_ID_17	0x2517 /* USB2517/17i */
 
 #define USB251XB_ADDR_DEVICE_ID_LSB	0x04
 #define USB251XB_ADDR_DEVICE_ID_MSB	0x05
@@ -82,7 +73,7 @@
 
 #define USB251XB_ADDR_PRODUCT_STRING_LEN	0x14
 #define USB251XB_ADDR_PRODUCT_STRING		0x54
-#define USB251XB_DEF_PRODUCT_STRING		"USB251xB/xBi"
+#define USB251XB_DEF_PRODUCT_STRING		"USB251xB/xBi/7i"
 
 #define USB251XB_ADDR_SERIAL_STRING_LEN		0x15
 #define USB251XB_ADDR_SERIAL_STRING		0x92
@@ -93,8 +84,10 @@
 
 #define USB251XB_ADDR_BOOST_UP	0xF6
 #define USB251XB_DEF_BOOST_UP	0x00
-#define USB251XB_ADDR_BOOST_X	0xF8
-#define USB251XB_DEF_BOOST_X	0x00
+#define USB251XB_ADDR_BOOST_57	0xF7
+#define USB251XB_DEF_BOOST_57	0x00
+#define USB251XB_ADDR_BOOST_14	0xF8
+#define USB251XB_DEF_BOOST_14	0x00
 
 #define USB251XB_ADDR_PORT_SWAP	0xFA
 #define USB251XB_DEF_PORT_SWAP	0x00
@@ -102,7 +95,11 @@
 #define USB251XB_ADDR_PORT_MAP_12	0xFB
 #define USB251XB_DEF_PORT_MAP_12	0x00
 #define USB251XB_ADDR_PORT_MAP_34	0xFC
-#define USB251XB_DEF_PORT_MAP_34	0x00 /* USB2513B/i & USB2514B/i only */
+#define USB251XB_DEF_PORT_MAP_34	0x00 /* USB251{3B/i,4B/i,7/i} only */
+#define USB251XB_ADDR_PORT_MAP_56	0xFD
+#define USB251XB_DEF_PORT_MAP_56	0x00 /* USB2517/i only */
+#define USB251XB_ADDR_PORT_MAP_7	0xFE
+#define USB251XB_DEF_PORT_MAP_7		0x00 /* USB2517/i only */
 
 #define USB251XB_ADDR_STATUS_COMMAND		0xFF
 #define USB251XB_STATUS_COMMAND_SMBUS_DOWN	0x04
@@ -119,7 +116,7 @@ struct usb251xb {
 	struct device *dev;
 	struct i2c_client *i2c;
 	u8 skip_config;
-	int gpio_reset;
+	struct gpio_desc *gpio_reset;
 	u16 vendor_id;
 	u16 product_id;
 	u16 device_id;
@@ -143,57 +140,97 @@ struct usb251xb {
 	char serial[USB251XB_STRING_BUFSIZE];
 	u8  bat_charge_en;
 	u8  boost_up;
-	u8  boost_x;
+	u8  boost_57;
+	u8  boost_14;
 	u8  port_swap;
 	u8  port_map12;
 	u8  port_map34;
+	u8  port_map56;
+	u8  port_map7;
 	u8  status;
 };
 
 struct usb251xb_data {
 	u16 product_id;
+	u8 port_cnt;
+	bool led_support;
+	bool bat_support;
 	char product_str[USB251XB_STRING_BUFSIZE / 2]; /* ASCII string */
 };
 
 static const struct usb251xb_data usb2512b_data = {
 	.product_id = 0x2512,
+	.port_cnt = 2,
+	.led_support = false,
+	.bat_support = true,
 	.product_str = "USB2512B",
 };
 
 static const struct usb251xb_data usb2512bi_data = {
 	.product_id = 0x2512,
+	.port_cnt = 2,
+	.led_support = false,
+	.bat_support = true,
 	.product_str = "USB2512Bi",
 };
 
 static const struct usb251xb_data usb2513b_data = {
 	.product_id = 0x2513,
+	.port_cnt = 3,
+	.led_support = false,
+	.bat_support = true,
 	.product_str = "USB2513B",
 };
 
 static const struct usb251xb_data usb2513bi_data = {
 	.product_id = 0x2513,
+	.port_cnt = 3,
+	.led_support = false,
+	.bat_support = true,
 	.product_str = "USB2513Bi",
 };
 
 static const struct usb251xb_data usb2514b_data = {
 	.product_id = 0x2514,
+	.port_cnt = 4,
+	.led_support = false,
+	.bat_support = true,
 	.product_str = "USB2514B",
 };
 
 static const struct usb251xb_data usb2514bi_data = {
 	.product_id = 0x2514,
+	.port_cnt = 4,
+	.led_support = false,
+	.bat_support = true,
 	.product_str = "USB2514Bi",
 };
 
+static const struct usb251xb_data usb2517_data = {
+	.product_id = 0x2517,
+	.port_cnt = 7,
+	.led_support = true,
+	.bat_support = false,
+	.product_str = "USB2517",
+};
+
+static const struct usb251xb_data usb2517i_data = {
+	.product_id = 0x2517,
+	.port_cnt = 7,
+	.led_support = true,
+	.bat_support = false,
+	.product_str = "USB2517i",
+};
+
 static void usb251xb_reset(struct usb251xb *hub, int state)
 {
-	if (!gpio_is_valid(hub->gpio_reset))
+	if (!hub->gpio_reset)
 		return;
 
-	gpio_set_value_cansleep(hub->gpio_reset, state);
+	gpiod_set_value_cansleep(hub->gpio_reset, state);
 
 	/* wait for hub recovery/stabilization */
-	if (state)
+	if (!state)
 		usleep_range(500, 750);	/* >=500us at power on */
 	else
 		usleep_range(1, 10);	/* >=1us at power down */
@@ -212,7 +249,7 @@ static int usb251xb_connect(struct usb251xb *hub)
 		i2c_wb[0] = 0x01;
 		i2c_wb[1] = USB251XB_STATUS_COMMAND_ATTACH;
 
-		usb251xb_reset(hub, 1);
+		usb251xb_reset(hub, 0);
 
 		err = i2c_smbus_write_i2c_block_data(hub->i2c,
 				USB251XB_ADDR_STATUS_COMMAND, 2, i2c_wb);
@@ -253,13 +290,16 @@ static int usb251xb_connect(struct usb251xb *hub)
 	       USB251XB_STRING_BUFSIZE);
 	i2c_wb[USB251XB_ADDR_BATTERY_CHARGING_ENABLE] = hub->bat_charge_en;
 	i2c_wb[USB251XB_ADDR_BOOST_UP]          = hub->boost_up;
-	i2c_wb[USB251XB_ADDR_BOOST_X]           = hub->boost_x;
+	i2c_wb[USB251XB_ADDR_BOOST_57]          = hub->boost_57;
+	i2c_wb[USB251XB_ADDR_BOOST_14]          = hub->boost_14;
 	i2c_wb[USB251XB_ADDR_PORT_SWAP]         = hub->port_swap;
 	i2c_wb[USB251XB_ADDR_PORT_MAP_12]       = hub->port_map12;
 	i2c_wb[USB251XB_ADDR_PORT_MAP_34]       = hub->port_map34;
+	i2c_wb[USB251XB_ADDR_PORT_MAP_56]       = hub->port_map56;
+	i2c_wb[USB251XB_ADDR_PORT_MAP_7]        = hub->port_map7;
 	i2c_wb[USB251XB_ADDR_STATUS_COMMAND] = USB251XB_STATUS_COMMAND_ATTACH;
 
-	usb251xb_reset(hub, 1);
+	usb251xb_reset(hub, 0);
 
 	/* write registers */
 	for (i = 0; i < (USB251XB_I2C_REG_SZ / USB251XB_I2C_WRITE_SZ); i++) {
@@ -297,7 +337,7 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	struct device *dev = hub->dev;
 	struct device_node *np = dev->of_node;
 	int len, err, i;
-	u32 *property_u32 = NULL;
+	u32 property_u32 = 0;
 	const u32 *cproperty_u32;
 	const char *cproperty_char;
 	char str[USB251XB_STRING_BUFSIZE / 2];
@@ -312,19 +352,13 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	else
 		hub->skip_config = 0;
 
-	hub->gpio_reset = of_get_named_gpio(np, "reset-gpios", 0);
-	if (hub->gpio_reset == -EPROBE_DEFER)
+	hub->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (PTR_ERR(hub->gpio_reset) == -EPROBE_DEFER) {
 		return -EPROBE_DEFER;
-	if (gpio_is_valid(hub->gpio_reset)) {
-		err = devm_gpio_request_one(dev, hub->gpio_reset,
-					    GPIOF_OUT_INIT_LOW,
-					    "usb251xb reset");
-		if (err) {
-			dev_err(dev,
-				"unable to request GPIO %d as reset pin (%d)\n",
-				hub->gpio_reset, err);
-			return err;
-		}
+	} else if (IS_ERR(hub->gpio_reset)) {
+		err = PTR_ERR(hub->gpio_reset);
+		dev_err(dev, "unable to request GPIO reset pin (%d)\n", err);
+		return err;
 	}
 
 	if (of_property_read_u16_array(np, "vendor-id", &hub->vendor_id, 1))
@@ -374,16 +408,16 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	if (of_get_property(np, "dynamic-power-switching", NULL))
 		hub->conf_data2 |= BIT(7);
 
-	if (!of_property_read_u32(np, "oc-delay-us", property_u32)) {
-		if (*property_u32 == 100) {
+	if (!of_property_read_u32(np, "oc-delay-us", &property_u32)) {
+		if (property_u32 == 100) {
 			/* 100 us*/
 			hub->conf_data2 &= ~BIT(5);
 			hub->conf_data2 &= ~BIT(4);
-		} else if (*property_u32 == 4000) {
+		} else if (property_u32 == 4000) {
 			/* 4 ms */
 			hub->conf_data2 &= ~BIT(5);
 			hub->conf_data2 |= BIT(4);
-		} else if (*property_u32 == 16000) {
+		} else if (property_u32 == 16000) {
 			/* 16 ms */
 			hub->conf_data2 |= BIT(5);
 			hub->conf_data2 |= BIT(4);
@@ -401,6 +435,9 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	if (of_get_property(np, "port-mapping-mode", NULL))
 		hub->conf_data3 |= BIT(3);
 
+	if (data->led_support && of_get_property(np, "led-usb-mode", NULL))
+		hub->conf_data3 &= ~BIT(1);
+
 	if (of_get_property(np, "string-support", NULL))
 		hub->conf_data3 |= BIT(0);
 
@@ -410,8 +447,11 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 		for (i = 0; i < len / sizeof(u32); i++) {
 			u32 port = be32_to_cpu(cproperty_u32[i]);
 
-			if ((port >= 1) && (port <= 4))
+			if ((port >= 1) && (port <= data->port_cnt))
 				hub->non_rem_dev |= BIT(port);
+			else
+				dev_warn(dev, "NRD port %u doesn't exist\n",
+					port);
 		}
 	}
 
@@ -421,8 +461,11 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 		for (i = 0; i < len / sizeof(u32); i++) {
 			u32 port = be32_to_cpu(cproperty_u32[i]);
 
-			if ((port >= 1) && (port <= 4))
+			if ((port >= 1) && (port <= data->port_cnt))
 				hub->port_disable_sp |= BIT(port);
+			else
+				dev_warn(dev, "PDS port %u doesn't exist\n",
+					port);
 		}
 	}
 
@@ -432,14 +475,37 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 		for (i = 0; i < len / sizeof(u32); i++) {
 			u32 port = be32_to_cpu(cproperty_u32[i]);
 
-			if ((port >= 1) && (port <= 4))
+			if ((port >= 1) && (port <= data->port_cnt))
 				hub->port_disable_bp |= BIT(port);
+			else
+				dev_warn(dev, "PDB port %u doesn't exist\n",
+					port);
 		}
 	}
 
+	hub->max_power_sp = USB251XB_DEF_MAX_POWER_SELF;
+	if (!of_property_read_u32(np, "sp-max-total-current-microamp",
+	    &property_u32))
+		hub->max_power_sp = min_t(u8, property_u32 / 2000, 50);
+
+	hub->max_power_bp = USB251XB_DEF_MAX_POWER_BUS;
+	if (!of_property_read_u32(np, "bp-max-total-current-microamp",
+	    &property_u32))
+		hub->max_power_bp = min_t(u8, property_u32 / 2000, 255);
+
+	hub->max_current_sp = USB251XB_DEF_MAX_CURRENT_SELF;
+	if (!of_property_read_u32(np, "sp-max-removable-current-microamp",
+	    &property_u32))
+		hub->max_current_sp = min_t(u8, property_u32 / 2000, 50);
+
+	hub->max_current_bp = USB251XB_DEF_MAX_CURRENT_BUS;
+	if (!of_property_read_u32(np, "bp-max-removable-current-microamp",
+	    &property_u32))
+		hub->max_current_bp = min_t(u8, property_u32 / 2000, 255);
+
 	hub->power_on_time = USB251XB_DEF_POWER_ON_TIME;
-	if (!of_property_read_u32(np, "power-on-time-ms", property_u32))
-		hub->power_on_time = min_t(u8, *property_u32 / 2, 255);
+	if (!of_property_read_u32(np, "power-on-time-ms", &property_u32))
+		hub->power_on_time = min_t(u8, property_u32 / 2, 255);
 
 	if (of_property_read_u16_array(np, "language-id", &hub->lang_id, 1))
 		hub->lang_id = USB251XB_DEF_LANGUAGE_ID;
@@ -476,16 +542,15 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	/* The following parameters are currently not exposed to devicetree, but
 	 * may be as soon as needed.
 	 */
-	hub->max_power_sp = USB251XB_DEF_MAX_POWER_SELF;
-	hub->max_power_bp = USB251XB_DEF_MAX_POWER_BUS;
-	hub->max_current_sp = USB251XB_DEF_MAX_CURRENT_SELF;
-	hub->max_current_bp = USB251XB_DEF_MAX_CURRENT_BUS;
 	hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE;
 	hub->boost_up = USB251XB_DEF_BOOST_UP;
-	hub->boost_x = USB251XB_DEF_BOOST_X;
+	hub->boost_57 = USB251XB_DEF_BOOST_57;
+	hub->boost_14 = USB251XB_DEF_BOOST_14;
 	hub->port_swap = USB251XB_DEF_PORT_SWAP;
 	hub->port_map12 = USB251XB_DEF_PORT_MAP_12;
 	hub->port_map34 = USB251XB_DEF_PORT_MAP_34;
+	hub->port_map56 = USB251XB_DEF_PORT_MAP_56;
+	hub->port_map7  = USB251XB_DEF_PORT_MAP_7;
 
 	return 0;
 }
@@ -510,6 +575,12 @@ static const struct of_device_id usb251xb_of_match[] = {
 		.compatible = "microchip,usb2514bi",
 		.data = &usb2514bi_data,
 	}, {
+		.compatible = "microchip,usb2517",
+		.data = &usb2517_data,
+	}, {
+		.compatible = "microchip,usb2517i",
+		.data = &usb2517i_data,
+	}, {
 		/* sentinel */
 	}
 };
@@ -573,6 +644,8 @@ static const struct i2c_device_id usb251xb_id[] = {
 	{ "usb2513bi", 0 },
 	{ "usb2514b", 0 },
 	{ "usb2514bi", 0 },
+	{ "usb2517", 0 },
+	{ "usb2517i", 0 },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(i2c, usb251xb_id);
@@ -589,5 +662,5 @@ static struct i2c_driver usb251xb_i2c_driver = {
 module_i2c_driver(usb251xb_i2c_driver);
 
 MODULE_AUTHOR("Richard Leitner <richard.leitner@skidata.com>");
-MODULE_DESCRIPTION("USB251xB/xBi USB 2.0 Hub Controller Driver");
+MODULE_DESCRIPTION("USB251x/xBi USB 2.0 Hub Controller Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
index 8e7737d7ac0a..465dbf68b463 100644
--- a/drivers/usb/misc/usb3503.c
+++ b/drivers/usb/misc/usb3503.c
@@ -1,21 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for SMSC USB3503 USB 2.0 hub controller driver
  *
  * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/clk.h>
diff --git a/drivers/usb/misc/usb4604.c b/drivers/usb/misc/usb4604.c
index e9f37fb746ac..1b4de651e697 100644
--- a/drivers/usb/misc/usb4604.c
+++ b/drivers/usb/misc/usb4604.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for SMSC USB4604 USB HSIC 4-port 2.0 hub controller driver
  * Based on usb3503 driver
  *
  * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com)
  * Copyright (c) 2016 Linaro Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/i2c.h>
diff --git a/drivers/usb/misc/usb_u132.h b/drivers/usb/misc/usb_u132.h
index dc2e5a31caec..4bf77736914f 100644
--- a/drivers/usb/misc/usb_u132.h
+++ b/drivers/usb/misc/usb_u132.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
 * Common Header File for the Elan Digital Systems U132 adapter
 * this file should be included by both the "ftdi-u132" and
@@ -9,11 +10,6 @@
 * Author and Maintainer - Tony Olech - Elan Digital Systems
 *(tony.olech@elandigitalsystems.com)
 *
-* This program is free software;you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation, version 2.
-*
-*
 * The driver was written by Tony Olech(tony.olech@elandigitalsystems.com)
 * based on various USB client drivers in the 2.6.15 linux kernel
 * with constant reference to the 3rd Edition of Linux Device Drivers
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index 0f5ad896c7e3..9ba4a4e68d91 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*****************************************************************************
  *                          USBLCD Kernel Driver                             *
  *                            Version 1.05                                   *
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index 3f6a28045b53..12f7e94695a2 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB 7 Segment Driver
  *
  * Copyright (C) 2008 Harrison Metzger <harrisonmetz@gmail.com>
  * Based on usbled.c by Greg Kroah-Hartman (greg@kroah.com)
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 5ad74750e8a4..aedc9a7f149e 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/init.h>
@@ -1023,7 +1024,7 @@ static int ch9_postconfig(struct usbtest_dev *dev)
 	/* FIXME fetch strings from at least the device descriptor */
 
 	/* [9.4.5] get_status always works */
-	retval = usb_get_status(udev, USB_RECIP_DEVICE, 0, dev->buf);
+	retval = usb_get_std_status(udev, USB_RECIP_DEVICE, 0, dev->buf);
 	if (retval) {
 		dev_err(&iface->dev, "get dev status --> %d\n", retval);
 		return retval;
@@ -1033,7 +1034,7 @@ static int ch9_postconfig(struct usbtest_dev *dev)
 	 * the device's remote wakeup feature ... if we can, test that here
 	 */
 
-	retval = usb_get_status(udev, USB_RECIP_INTERFACE,
+	retval = usb_get_std_status(udev, USB_RECIP_INTERFACE,
 			iface->altsetting[0].desc.bInterfaceNumber, dev->buf);
 	if (retval) {
 		dev_err(&iface->dev, "get interface status --> %d\n", retval);
@@ -1622,7 +1623,7 @@ static int verify_not_halted(struct usbtest_dev *tdev, int ep, struct urb *urb)
 	u16	status;
 
 	/* shouldn't look or act halted */
-	retval = usb_get_status(urb->dev, USB_RECIP_ENDPOINT, ep, &status);
+	retval = usb_get_std_status(urb->dev, USB_RECIP_ENDPOINT, ep, &status);
 	if (retval < 0) {
 		ERROR(tdev, "ep %02x couldn't get no-halt status, %d\n",
 				ep, retval);
@@ -1644,7 +1645,7 @@ static int verify_halted(struct usbtest_dev *tdev, int ep, struct urb *urb)
 	u16	status;
 
 	/* should look and act halted */
-	retval = usb_get_status(urb->dev, USB_RECIP_ENDPOINT, ep, &status);
+	retval = usb_get_std_status(urb->dev, USB_RECIP_ENDPOINT, ep, &status);
 	if (retval < 0) {
 		ERROR(tdev, "ep %02x couldn't get halt status, %d\n",
 				ep, retval);
@@ -1917,7 +1918,7 @@ static struct urb *iso_alloc_urb(
 
 	if (bytes < 0 || !desc)
 		return NULL;
-	maxp = 0x7ff & usb_endpoint_maxp(desc);
+	maxp = usb_endpoint_maxp(desc);
 	maxp *= usb_endpoint_maxp_mult(desc);
 	packets = DIV_ROUND_UP(bytes, maxp);
 
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index 8a13b2fcf3e1..263c97fec708 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*****************************************************************************/
 
 /*
@@ -6,20 +7,6 @@
  *	Copyright (C) 1999, 2005, 2010
  *	    Thomas Sailer (t.sailer@alumni.ethz.ch)
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
  *  Based on parport_pc.c
  *
  *  History:
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 58abdf28620a..8abb6cbbd98a 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for Meywa-Denki & KAYAC YUREX
  *
  * Copyright (C) 2010 Tomoki Sekiyama (tomoki.sekiyama@gmail.com)
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/mon/Makefile b/drivers/usb/mon/Makefile
index 8ed24ab08698..09f43e89633c 100644
--- a/drivers/usb/mon/Makefile
+++ b/drivers/usb/mon/Makefile
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # Makefile for USB monitor
 #
diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c
index 46847340b819..9812d102a005 100644
--- a/drivers/usb/mon/mon_main.c
+++ b/drivers/usb/mon/mon_main.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * The USB Monitor, inspired by Dave Harding's USBMon.
  *
diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
index b26fffc58446..3c888d942a9f 100644
--- a/drivers/usb/mtu3/mtu3.h
+++ b/drivers/usb/mtu3/mtu3.h
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * mtu3.h - MediaTek USB3 DRD header
  *
  * Copyright (C) 2016 MediaTek Inc.
  *
  * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef __MTU3_H__
@@ -46,6 +37,9 @@ struct mtu3_request;
 #define	MU3D_EP_RXCR1(epnum)	(U3D_RX1CSR1 + (((epnum) - 1) * 0x10))
 #define	MU3D_EP_RXCR2(epnum)	(U3D_RX1CSR2 + (((epnum) - 1) * 0x10))
 
+#define USB_QMU_TQHIAR(epnum)	(U3D_TXQHIAR1 + (((epnum) - 1) * 0x4))
+#define USB_QMU_RQHIAR(epnum)	(U3D_RXQHIAR1 + (((epnum) - 1) * 0x4))
+
 #define USB_QMU_RQCSR(epnum)	(U3D_RXQCSR1 + (((epnum) - 1) * 0x10))
 #define USB_QMU_RQSAR(epnum)	(U3D_RXQSAR1 + (((epnum) - 1) * 0x10))
 #define USB_QMU_RQCPR(epnum)	(U3D_RXQCPR1 + (((epnum) - 1) * 0x10))
@@ -91,6 +85,7 @@ enum mtu3_speed {
 	MTU3_SPEED_FULL = 1,
 	MTU3_SPEED_HIGH = 3,
 	MTU3_SPEED_SUPER = 4,
+	MTU3_SPEED_SUPER_PLUS = 5,
 };
 
 /**
@@ -112,6 +107,19 @@ enum mtu3_g_ep0_state {
 };
 
 /**
+ * MTU3_DR_FORCE_NONE: automatically switch host and periperal mode
+ *		by IDPIN signal.
+ * MTU3_DR_FORCE_HOST: force to enter host mode and override OTG
+ *		IDPIN signal.
+ * MTU3_DR_FORCE_DEVICE: force to enter peripheral mode.
+ */
+enum mtu3_dr_force_mode {
+	MTU3_DR_FORCE_NONE = 0,
+	MTU3_DR_FORCE_HOST,
+	MTU3_DR_FORCE_DEVICE,
+};
+
+/**
  * @base: the base address of fifo
  * @limit: the bitmap size in bits
  * @bitmap: fifo bitmap in unit of @MTU3_EP_FIFO_UNIT
@@ -138,23 +146,33 @@ struct mtu3_fifo_info {
  *	Checksum value is calculated over the 16 bytes of the GPD by default;
  * @data_buf_len (RX ONLY): This value indicates the length of
  *	the assigned data buffer
+ * @tx_ext_addr (TX ONLY): [3:0] are 4 extension bits of @buffer,
+ *	[7:4] are 4 extension bits of @next_gpd
  * @next_gpd: Physical address of the next GPD
  * @buffer: Physical address of the data buffer
  * @buf_len:
  *	(TX): This value indicates the length of the assigned data buffer
  *	(RX): The total length of data received
  * @ext_len: reserved
+ * @rx_ext_addr(RX ONLY): [3:0] are 4 extension bits of @buffer,
+ *	[7:4] are 4 extension bits of @next_gpd
  * @ext_flag:
  *	bit5 (TX ONLY): Zero Length Packet (ZLP),
  */
 struct qmu_gpd {
 	__u8 flag;
 	__u8 chksum;
-	__le16 data_buf_len;
+	union {
+		__le16 data_buf_len;
+		__le16 tx_ext_addr;
+	};
 	__le32 next_gpd;
 	__le32 buffer;
 	__le16 buf_len;
-	__u8 ext_len;
+	union {
+		__u8 ext_len;
+		__u8 rx_ext_addr;
+	};
 	__u8 ext_flag;
 } __packed;
 
@@ -183,7 +201,6 @@ struct mtu3_gpd_ring {
 *		xHCI driver initialization, it's necessary for system bootup
 *		as device.
 * @is_u3_drd: whether port0 supports usb3.0 dual-role device or not
-* @id_*: used to maually switch between host and device modes by idpin
 * @manual_drd_enabled: it's true when supports dual-role device by debugfs
 *		to switch host/device modes depending on user input.
 */
@@ -194,10 +211,6 @@ struct otg_switch_mtk {
 	struct notifier_block id_nb;
 	struct delayed_work extcon_reg_dwork;
 	bool is_u3_drd;
-	/* dual-role switch by debugfs */
-	struct pinctrl *id_pinctrl;
-	struct pinctrl_state *id_float;
-	struct pinctrl_state *id_ground;
 	bool manual_drd_enabled;
 };
 
@@ -206,14 +219,17 @@ struct otg_switch_mtk {
  * @ippc_base: register base address of IP Power and Clock interface (IPPC)
  * @vusb33: usb3.3V shared by device/host IP
  * @sys_clk: system clock of mtu3, shared by device/host IP
+ * @ref_clk: reference clock
+ * @mcu_clk: mcu_bus_ck clock for AHB bus etc
+ * @dma_clk: dma_bus_ck clock for AXI bus etc
  * @dr_mode: works in which mode:
  *		host only, device only or dual-role mode
  * @u2_ports: number of usb2.0 host ports
  * @u3_ports: number of usb3.0 host ports
+ * @u3p_dis_msk: mask of disabling usb3 ports, for example, bit0==1 to
+ *		disable u3port0, bit1==1 to disable u3port1,... etc
  * @dbgfs_root: only used when supports manual dual-role switch via debugfs
  * @wakeup_en: it's true when supports remote wakeup in host mode
- * @wk_deb_p0: port0's wakeup debounce clock
- * @wk_deb_p1: it's optional, and depends on port1 is supported or not
  */
 struct ssusb_mtk {
 	struct device *dev;
@@ -226,17 +242,18 @@ struct ssusb_mtk {
 	struct regulator *vusb33;
 	struct clk *sys_clk;
 	struct clk *ref_clk;
+	struct clk *mcu_clk;
+	struct clk *dma_clk;
 	/* otg */
 	struct otg_switch_mtk otg_switch;
 	enum usb_dr_mode dr_mode;
 	bool is_host;
 	int u2_ports;
 	int u3_ports;
+	int u3p_dis_msk;
 	struct dentry *dbgfs_root;
 	/* usb wakeup for host mode */
 	bool wakeup_en;
-	struct clk *wk_deb_p0;
-	struct clk *wk_deb_p1;
 	struct regmap *pericfg;
 };
 
diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index 99c65b0788ff..b1b99a8f6a7a 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * mtu3_core.c - hardware access layer and gadget init/exit of
  *                     MediaTek usb3 Dual-Role Controller Driver
@@ -5,18 +6,9 @@
  * Copyright (C) 2016 MediaTek Inc.
  *
  * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
@@ -114,7 +106,9 @@ static int mtu3_device_enable(struct mtu3 *mtu)
 	mtu3_clrbits(ibase, SSUSB_U2_CTRL(0),
 		(SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN |
 		SSUSB_U2_PORT_HOST_SEL));
-	mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
+
+	if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG)
+		mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
 
 	return ssusb_check_clocks(mtu->ssusb, check_clk);
 }
@@ -129,7 +123,10 @@ static void mtu3_device_disable(struct mtu3 *mtu)
 
 	mtu3_setbits(ibase, SSUSB_U2_CTRL(0),
 		SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN);
-	mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
+
+	if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG)
+		mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
+
 	mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
 }
 
@@ -236,7 +233,7 @@ void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set)
 
 void mtu3_dev_on_off(struct mtu3 *mtu, int is_on)
 {
-	if (mtu->is_u3_ip && (mtu->max_speed == USB_SPEED_SUPER))
+	if (mtu->is_u3_ip && mtu->max_speed >= USB_SPEED_SUPER)
 		mtu3_ss_func_set(mtu, is_on);
 	else
 		mtu3_hs_softconn_set(mtu, is_on);
@@ -546,6 +543,9 @@ static void mtu3_set_speed(struct mtu3 *mtu)
 		mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);
 		/* HS/FS detected by HW */
 		mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
+	} else if (mtu->max_speed == USB_SPEED_SUPER) {
+		mtu3_clrbits(mtu->ippc_base, SSUSB_U3_CTRL(0),
+			     SSUSB_U3_PORT_SSP_SPEED);
 	}
 
 	dev_info(mtu->dev, "max_speed: %s\n",
@@ -623,6 +623,10 @@ static irqreturn_t mtu3_link_isr(struct mtu3 *mtu)
 		udev_speed = USB_SPEED_SUPER;
 		maxpkt = 512;
 		break;
+	case MTU3_SPEED_SUPER_PLUS:
+		udev_speed = USB_SPEED_SUPER_PLUS;
+		maxpkt = 512;
+		break;
 	default:
 		udev_speed = USB_SPEED_UNKNOWN;
 		break;
@@ -759,7 +763,31 @@ static void mtu3_hw_exit(struct mtu3 *mtu)
 	mtu3_mem_free(mtu);
 }
 
-/*-------------------------------------------------------------------------*/
+/**
+ * we set 32-bit DMA mask by default, here check whether the controller
+ * supports 36-bit DMA or not, if it does, set 36-bit DMA mask.
+ */
+static int mtu3_set_dma_mask(struct mtu3 *mtu)
+{
+	struct device *dev = mtu->dev;
+	bool is_36bit = false;
+	int ret = 0;
+	u32 value;
+
+	value = mtu3_readl(mtu->mac_base, U3D_MISC_CTRL);
+	if (value & DMA_ADDR_36BIT) {
+		is_36bit = true;
+		ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(36));
+		/* If set 36-bit DMA mask fails, fall back to 32-bit DMA mask */
+		if (ret) {
+			is_36bit = false;
+			ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+		}
+	}
+	dev_info(dev, "dma mask: %s bits\n", is_36bit ? "36" : "32");
+
+	return ret;
+}
 
 int ssusb_gadget_init(struct ssusb_mtk *ssusb)
 {
@@ -774,9 +802,9 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb)
 		return -ENOMEM;
 
 	mtu->irq = platform_get_irq(pdev, 0);
-	if (mtu->irq <= 0) {
+	if (mtu->irq < 0) {
 		dev_err(dev, "fail to get irq number\n");
-		return -ENODEV;
+		return mtu->irq;
 	}
 	dev_info(dev, "irq %d\n", mtu->irq);
 
@@ -800,14 +828,15 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb)
 	case USB_SPEED_FULL:
 	case USB_SPEED_HIGH:
 	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
 		break;
 	default:
 		dev_err(dev, "invalid max_speed: %s\n",
 			usb_speed_string(mtu->max_speed));
 		/* fall through */
 	case USB_SPEED_UNKNOWN:
-		/* default as SS */
-		mtu->max_speed = USB_SPEED_SUPER;
+		/* default as SSP */
+		mtu->max_speed = USB_SPEED_SUPER_PLUS;
 		break;
 	}
 
@@ -820,6 +849,12 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb)
 		return ret;
 	}
 
+	ret = mtu3_set_dma_mask(mtu);
+	if (ret) {
+		dev_err(dev, "mtu3 set dma_mask failed:%d\n", ret);
+		goto dma_mask_err;
+	}
+
 	ret = devm_request_irq(dev, mtu->irq, mtu3_irq, 0, dev_name(dev), mtu);
 	if (ret) {
 		dev_err(dev, "request irq %d failed!\n", mtu->irq);
@@ -845,6 +880,7 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb)
 gadget_err:
 	device_init_wakeup(dev, false);
 
+dma_mask_err:
 irq_err:
 	mtu3_hw_exit(mtu);
 	ssusb->u3d = NULL;
diff --git a/drivers/usb/mtu3/mtu3_dr.c b/drivers/usb/mtu3/mtu3_dr.c
index 560256115b23..db7562d99b95 100644
--- a/drivers/usb/mtu3/mtu3_dr.c
+++ b/drivers/usb/mtu3/mtu3_dr.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * mtu3_dr.c - dual role switch and host glue layer
  *
  * Copyright (C) 2016 MediaTek Inc.
  *
  * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <linux/debugfs.h>
@@ -261,21 +252,22 @@ static void extcon_register_dwork(struct work_struct *work)
  * depending on user input.
  * This is useful in special cases, such as uses TYPE-A receptacle but also
  * wants to support dual-role mode.
- * It generates cable state changes by pulling up/down IDPIN and
- * notifies driver to switch mode by "extcon-usb-gpio".
- * NOTE: when use MICRO receptacle, should not enable this interface.
  */
 static void ssusb_mode_manual_switch(struct ssusb_mtk *ssusb, int to_host)
 {
 	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
 
-	if (to_host)
-		pinctrl_select_state(otg_sx->id_pinctrl, otg_sx->id_ground);
-	else
-		pinctrl_select_state(otg_sx->id_pinctrl, otg_sx->id_float);
+	if (to_host) {
+		ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);
+		ssusb_set_mailbox(otg_sx, MTU3_VBUS_OFF);
+		ssusb_set_mailbox(otg_sx, MTU3_ID_GROUND);
+	} else {
+		ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_DEVICE);
+		ssusb_set_mailbox(otg_sx, MTU3_ID_FLOAT);
+		ssusb_set_mailbox(otg_sx, MTU3_VBUS_VALID);
+	}
 }
 
-
 static int ssusb_mode_show(struct seq_file *sf, void *unused)
 {
 	struct ssusb_mtk *ssusb = sf->private;
@@ -388,17 +380,45 @@ static void ssusb_debugfs_exit(struct ssusb_mtk *ssusb)
 	debugfs_remove_recursive(ssusb->dbgfs_root);
 }
 
+void ssusb_set_force_mode(struct ssusb_mtk *ssusb,
+			  enum mtu3_dr_force_mode mode)
+{
+	u32 value;
+
+	value = mtu3_readl(ssusb->ippc_base, SSUSB_U2_CTRL(0));
+	switch (mode) {
+	case MTU3_DR_FORCE_DEVICE:
+		value |= SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG;
+		break;
+	case MTU3_DR_FORCE_HOST:
+		value |= SSUSB_U2_PORT_FORCE_IDDIG;
+		value &= ~SSUSB_U2_PORT_RG_IDDIG;
+		break;
+	case MTU3_DR_FORCE_NONE:
+		value &= ~(SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG);
+		break;
+	default:
+		return;
+	}
+	mtu3_writel(ssusb->ippc_base, SSUSB_U2_CTRL(0), value);
+}
+
 int ssusb_otg_switch_init(struct ssusb_mtk *ssusb)
 {
 	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
 
-	INIT_DELAYED_WORK(&otg_sx->extcon_reg_dwork, extcon_register_dwork);
-
-	if (otg_sx->manual_drd_enabled)
+	if (otg_sx->manual_drd_enabled) {
 		ssusb_debugfs_init(ssusb);
-
-	/* It is enough to delay 1s for waiting for host initialization */
-	schedule_delayed_work(&otg_sx->extcon_reg_dwork, HZ);
+	} else {
+		INIT_DELAYED_WORK(&otg_sx->extcon_reg_dwork,
+				  extcon_register_dwork);
+
+		/*
+		 * It is enough to delay 1s for waiting for
+		 * host initialization
+		 */
+		schedule_delayed_work(&otg_sx->extcon_reg_dwork, HZ);
+	}
 
 	return 0;
 }
@@ -407,8 +427,8 @@ void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb)
 {
 	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
 
-	cancel_delayed_work(&otg_sx->extcon_reg_dwork);
-
 	if (otg_sx->manual_drd_enabled)
 		ssusb_debugfs_exit(ssusb);
+	else
+		cancel_delayed_work(&otg_sx->extcon_reg_dwork);
 }
diff --git a/drivers/usb/mtu3/mtu3_dr.h b/drivers/usb/mtu3/mtu3_dr.h
index 9b228b5811b0..c179192408ba 100644
--- a/drivers/usb/mtu3/mtu3_dr.h
+++ b/drivers/usb/mtu3/mtu3_dr.h
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * mtu3_dr.h - dual role switch and host glue layer header
  *
  * Copyright (C) 2016 MediaTek Inc.
  *
  * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef _MTU3_DR_H_
@@ -87,6 +78,8 @@ static inline void ssusb_gadget_exit(struct ssusb_mtk *ssusb)
 int ssusb_otg_switch_init(struct ssusb_mtk *ssusb);
 void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb);
 int ssusb_set_vbus(struct otg_switch_mtk *otg_sx, int is_on);
+void ssusb_set_force_mode(struct ssusb_mtk *ssusb,
+			  enum mtu3_dr_force_mode mode);
 
 #else
 
@@ -103,6 +96,10 @@ static inline int ssusb_set_vbus(struct otg_switch_mtk *otg_sx, int is_on)
 	return 0;
 }
 
+static inline void
+ssusb_set_force_mode(struct ssusb_mtk *ssusb, enum mtu3_dr_force_mode mode)
+{}
+
 #endif
 
 #endif		/* _MTU3_DR_H_ */
diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c
index 434fca58143c..f05f10f5c171 100644
--- a/drivers/usb/mtu3/mtu3_gadget.c
+++ b/drivers/usb/mtu3/mtu3_gadget.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * mtu3_gadget.c - MediaTek usb3 DRD peripheral support
  *
  * Copyright (C) 2016 MediaTek Inc.
  *
  * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include "mtu3.h"
@@ -89,6 +80,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)
 
 	switch (mtu->g.speed) {
 	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
 		if (usb_endpoint_xfer_int(desc) ||
 				usb_endpoint_xfer_isoc(desc)) {
 			interval = desc->bInterval;
@@ -456,7 +448,7 @@ static int mtu3_gadget_wakeup(struct usb_gadget *gadget)
 		return  -EOPNOTSUPP;
 
 	spin_lock_irqsave(&mtu->lock, flags);
-	if (mtu->g.speed == USB_SPEED_SUPER) {
+	if (mtu->g.speed >= USB_SPEED_SUPER) {
 		mtu3_setbits(mtu->mac_base, U3D_LINK_POWER_CONTROL, UX_EXIT);
 	} else {
 		mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME);
diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c
index 958d74dd2b78..ebdcf7a38c29 100644
--- a/drivers/usb/mtu3/mtu3_gadget_ep0.c
+++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * mtu3_gadget_ep0.c - MediaTek USB3 DRD peripheral driver ep0 handling
  *
  * Copyright (c) 2016 MediaTek Inc.
  *
  * Author:  Chunfeng.Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <linux/usb/composite.h>
@@ -212,8 +203,8 @@ ep0_get_status(struct mtu3 *mtu, const struct usb_ctrlrequest *setup)
 	case USB_RECIP_DEVICE:
 		result[0] = mtu->is_self_powered << USB_DEVICE_SELF_POWERED;
 		result[0] |= mtu->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
-		/* superspeed only */
-		if (mtu->g.speed == USB_SPEED_SUPER) {
+
+		if (mtu->g.speed >= USB_SPEED_SUPER) {
 			result[0] |= mtu->u1_enable << USB_DEV_STAT_U1_ENABLED;
 			result[0] |= mtu->u2_enable << USB_DEV_STAT_U2_ENABLED;
 		}
@@ -329,8 +320,8 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu,
 		handled = handle_test_mode(mtu, setup);
 		break;
 	case USB_DEVICE_U1_ENABLE:
-		if (mtu->g.speed != USB_SPEED_SUPER ||
-			mtu->g.state != USB_STATE_CONFIGURED)
+		if (mtu->g.speed < USB_SPEED_SUPER ||
+		    mtu->g.state != USB_STATE_CONFIGURED)
 			break;
 
 		lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
@@ -344,8 +335,8 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu,
 		handled = 1;
 		break;
 	case USB_DEVICE_U2_ENABLE:
-		if (mtu->g.speed != USB_SPEED_SUPER ||
-			mtu->g.state != USB_STATE_CONFIGURED)
+		if (mtu->g.speed < USB_SPEED_SUPER ||
+		    mtu->g.state != USB_STATE_CONFIGURED)
 			break;
 
 		lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
@@ -384,8 +375,8 @@ static int ep0_handle_feature(struct mtu3 *mtu,
 		break;
 	case USB_RECIP_INTERFACE:
 		/* superspeed only */
-		if ((value == USB_INTRF_FUNC_SUSPEND)
-			&& (mtu->g.speed == USB_SPEED_SUPER)) {
+		if (value == USB_INTRF_FUNC_SUSPEND &&
+		    mtu->g.speed >= USB_SPEED_SUPER) {
 			/*
 			 * forward the request because function drivers
 			 * should handle it
diff --git a/drivers/usb/mtu3/mtu3_host.c b/drivers/usb/mtu3/mtu3_host.c
index e42d308b8dc2..d237d7e65c44 100644
--- a/drivers/usb/mtu3/mtu3_host.c
+++ b/drivers/usb/mtu3/mtu3_host.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * mtu3_dr.c - dual role switch and host glue layer
  *
  * Copyright (C) 2016 MediaTek Inc.
  *
  * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <linux/clk.h>
@@ -79,20 +70,6 @@ int ssusb_wakeup_of_property_parse(struct ssusb_mtk *ssusb,
 	if (!ssusb->wakeup_en)
 		return 0;
 
-	ssusb->wk_deb_p0 = devm_clk_get(dev, "wakeup_deb_p0");
-	if (IS_ERR(ssusb->wk_deb_p0)) {
-		dev_err(dev, "fail to get wakeup_deb_p0\n");
-		return PTR_ERR(ssusb->wk_deb_p0);
-	}
-
-	if (of_property_read_bool(dn, "wakeup_deb_p1")) {
-		ssusb->wk_deb_p1 = devm_clk_get(dev, "wakeup_deb_p1");
-		if (IS_ERR(ssusb->wk_deb_p1)) {
-			dev_err(dev, "fail to get wakeup_deb_p1\n");
-			return PTR_ERR(ssusb->wk_deb_p1);
-		}
-	}
-
 	ssusb->pericfg = syscon_regmap_lookup_by_phandle(dn,
 						"mediatek,syscon-wakeup");
 	if (IS_ERR(ssusb->pericfg)) {
@@ -103,36 +80,6 @@ int ssusb_wakeup_of_property_parse(struct ssusb_mtk *ssusb,
 	return 0;
 }
 
-static int ssusb_wakeup_clks_enable(struct ssusb_mtk *ssusb)
-{
-	int ret;
-
-	ret = clk_prepare_enable(ssusb->wk_deb_p0);
-	if (ret) {
-		dev_err(ssusb->dev, "failed to enable wk_deb_p0\n");
-		goto usb_p0_err;
-	}
-
-	ret = clk_prepare_enable(ssusb->wk_deb_p1);
-	if (ret) {
-		dev_err(ssusb->dev, "failed to enable wk_deb_p1\n");
-		goto usb_p1_err;
-	}
-
-	return 0;
-
-usb_p1_err:
-	clk_disable_unprepare(ssusb->wk_deb_p0);
-usb_p0_err:
-	return -EINVAL;
-}
-
-static void ssusb_wakeup_clks_disable(struct ssusb_mtk *ssusb)
-{
-	clk_disable_unprepare(ssusb->wk_deb_p1);
-	clk_disable_unprepare(ssusb->wk_deb_p0);
-}
-
 static void host_ports_num_get(struct ssusb_mtk *ssusb)
 {
 	u32 xhci_cap;
@@ -151,6 +98,7 @@ int ssusb_host_enable(struct ssusb_mtk *ssusb)
 	void __iomem *ibase = ssusb->ippc_base;
 	int num_u3p = ssusb->u3_ports;
 	int num_u2p = ssusb->u2_ports;
+	int u3_ports_disabed;
 	u32 check_clk;
 	u32 value;
 	int i;
@@ -158,8 +106,14 @@ int ssusb_host_enable(struct ssusb_mtk *ssusb)
 	/* power on host ip */
 	mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);
 
-	/* power on and enable all u3 ports */
+	/* power on and enable u3 ports except skipped ones */
+	u3_ports_disabed = 0;
 	for (i = 0; i < num_u3p; i++) {
+		if ((0x1 << i) & ssusb->u3p_dis_msk) {
+			u3_ports_disabed++;
+			continue;
+		}
+
 		value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
 		value &= ~(SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS);
 		value |= SSUSB_U3_PORT_HOST_SEL;
@@ -175,7 +129,7 @@ int ssusb_host_enable(struct ssusb_mtk *ssusb)
 	}
 
 	check_clk = SSUSB_XHCI_RST_B_STS;
-	if (num_u3p)
+	if (num_u3p > u3_ports_disabed)
 		check_clk = SSUSB_U3_MAC_RST_B_STS;
 
 	return ssusb_check_clocks(ssusb, check_clk);
@@ -190,8 +144,11 @@ int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend)
 	int ret;
 	int i;
 
-	/* power down and disable all u3 ports */
+	/* power down and disable u3 ports except skipped ones */
 	for (i = 0; i < num_u3p; i++) {
+		if ((0x1 << i) & ssusb->u3p_dis_msk)
+			continue;
+
 		value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
 		value |= SSUSB_U3_PORT_PDN;
 		value |= suspend ? 0 : SSUSB_U3_PORT_DIS;
@@ -223,6 +180,8 @@ int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend)
 
 static void ssusb_host_setup(struct ssusb_mtk *ssusb)
 {
+	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
+
 	host_ports_num_get(ssusb);
 
 	/*
@@ -231,6 +190,9 @@ static void ssusb_host_setup(struct ssusb_mtk *ssusb)
 	 */
 	ssusb_host_enable(ssusb);
 
+	if (otg_sx->manual_drd_enabled)
+		ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);
+
 	/* if port0 supports dual-role, works as host mode by default */
 	ssusb_set_vbus(&ssusb->otg_switch, 1);
 }
@@ -276,19 +238,14 @@ void ssusb_host_exit(struct ssusb_mtk *ssusb)
 
 int ssusb_wakeup_enable(struct ssusb_mtk *ssusb)
 {
-	int ret = 0;
-
-	if (ssusb->wakeup_en) {
-		ret = ssusb_wakeup_clks_enable(ssusb);
+	if (ssusb->wakeup_en)
 		ssusb_wakeup_ip_sleep_en(ssusb);
-	}
-	return ret;
+
+	return 0;
 }
 
 void ssusb_wakeup_disable(struct ssusb_mtk *ssusb)
 {
-	if (ssusb->wakeup_en) {
+	if (ssusb->wakeup_en)
 		ssusb_wakeup_ip_sleep_dis(ssusb);
-		ssusb_wakeup_clks_disable(ssusb);
-	}
 }
diff --git a/drivers/usb/mtu3/mtu3_hw_regs.h b/drivers/usb/mtu3/mtu3_hw_regs.h
index 06b29664470f..6ee371478d89 100644
--- a/drivers/usb/mtu3/mtu3_hw_regs.h
+++ b/drivers/usb/mtu3/mtu3_hw_regs.h
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * mtu3_hw_regs.h - MediaTek USB3 DRD register and field definitions
  *
  * Copyright (C) 2016 MediaTek Inc.
  *
  * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef _SSUSB_HW_REGS_H_
@@ -58,6 +49,8 @@
 #define U3D_QCR1		(SSUSB_DEV_BASE + 0x0404)
 #define U3D_QCR2		(SSUSB_DEV_BASE + 0x0408)
 #define U3D_QCR3		(SSUSB_DEV_BASE + 0x040C)
+#define U3D_TXQHIAR1		(SSUSB_DEV_BASE + 0x0484)
+#define U3D_RXQHIAR1		(SSUSB_DEV_BASE + 0x04C4)
 
 #define U3D_TXQCSR1		(SSUSB_DEV_BASE + 0x0510)
 #define U3D_TXQSAR1		(SSUSB_DEV_BASE + 0x0514)
@@ -189,6 +182,13 @@
 #define QMU_RX_COZ(x)		(BIT(16) << (x))
 #define QMU_RX_ZLP(x)		(BIT(0) << (x))
 
+/* U3D_TXQHIAR1 */
+/* U3D_RXQHIAR1 */
+#define QMU_LAST_DONE_PTR_HI(x)	(((x) >> 16) & 0xf)
+#define QMU_CUR_GPD_ADDR_HI(x)	(((x) >> 8) & 0xf)
+#define QMU_START_ADDR_HI_MSK	GENMASK(3, 0)
+#define QMU_START_ADDR_HI(x)	(((x) & 0xf) << 0)
+
 /* U3D_TXQCSR1 */
 /* U3D_RXQCSR1 */
 #define QMU_Q_ACTIVE		BIT(15)
@@ -225,6 +225,7 @@
 #define CAP_TX_EP_NUM(x)	((x) & 0x1f)
 
 /* U3D_MISC_CTRL */
+#define DMA_ADDR_36BIT		BIT(31)
 #define VBUS_ON			BIT(1)
 #define VBUS_FRC_EN		BIT(0)
 
@@ -457,11 +458,14 @@
 #define SSUSB_VBUS_CHG_INT_B_EN		BIT(6)
 
 /* U3D_SSUSB_U3_CTRL_0P */
+#define SSUSB_U3_PORT_SSP_SPEED	BIT(9)
 #define SSUSB_U3_PORT_HOST_SEL		BIT(2)
 #define SSUSB_U3_PORT_PDN		BIT(1)
 #define SSUSB_U3_PORT_DIS		BIT(0)
 
 /* U3D_SSUSB_U2_CTRL_0P */
+#define SSUSB_U2_PORT_RG_IDDIG		BIT(12)
+#define SSUSB_U2_PORT_FORCE_IDDIG	BIT(11)
 #define SSUSB_U2_PORT_VBUSVALID	BIT(9)
 #define SSUSB_U2_PORT_OTG_SEL		BIT(7)
 #define SSUSB_U2_PORT_HOST		BIT(2)
diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
index 088e3e685c4f..3650fd11fc49 100644
--- a/drivers/usb/mtu3/mtu3_plat.c
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -1,17 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2016 MediaTek Inc.
  *
  * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <linux/clk.h>
@@ -21,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 
 #include "mtu3.h"
@@ -110,15 +100,9 @@ static void ssusb_phy_power_off(struct ssusb_mtk *ssusb)
 		phy_power_off(ssusb->phys[i]);
 }
 
-static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
+static int ssusb_clks_enable(struct ssusb_mtk *ssusb)
 {
-	int ret = 0;
-
-	ret = regulator_enable(ssusb->vusb33);
-	if (ret) {
-		dev_err(ssusb->dev, "failed to enable vusb33\n");
-		goto vusb33_err;
-	}
+	int ret;
 
 	ret = clk_prepare_enable(ssusb->sys_clk);
 	if (ret) {
@@ -132,6 +116,52 @@ static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
 		goto ref_clk_err;
 	}
 
+	ret = clk_prepare_enable(ssusb->mcu_clk);
+	if (ret) {
+		dev_err(ssusb->dev, "failed to enable mcu_clk\n");
+		goto mcu_clk_err;
+	}
+
+	ret = clk_prepare_enable(ssusb->dma_clk);
+	if (ret) {
+		dev_err(ssusb->dev, "failed to enable dma_clk\n");
+		goto dma_clk_err;
+	}
+
+	return 0;
+
+dma_clk_err:
+	clk_disable_unprepare(ssusb->mcu_clk);
+mcu_clk_err:
+	clk_disable_unprepare(ssusb->ref_clk);
+ref_clk_err:
+	clk_disable_unprepare(ssusb->sys_clk);
+sys_clk_err:
+	return ret;
+}
+
+static void ssusb_clks_disable(struct ssusb_mtk *ssusb)
+{
+	clk_disable_unprepare(ssusb->dma_clk);
+	clk_disable_unprepare(ssusb->mcu_clk);
+	clk_disable_unprepare(ssusb->ref_clk);
+	clk_disable_unprepare(ssusb->sys_clk);
+}
+
+static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
+{
+	int ret = 0;
+
+	ret = regulator_enable(ssusb->vusb33);
+	if (ret) {
+		dev_err(ssusb->dev, "failed to enable vusb33\n");
+		goto vusb33_err;
+	}
+
+	ret = ssusb_clks_enable(ssusb);
+	if (ret)
+		goto clks_err;
+
 	ret = ssusb_phy_init(ssusb);
 	if (ret) {
 		dev_err(ssusb->dev, "failed to init phy\n");
@@ -149,20 +179,16 @@ static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
 phy_err:
 	ssusb_phy_exit(ssusb);
 phy_init_err:
-	clk_disable_unprepare(ssusb->ref_clk);
-ref_clk_err:
-	clk_disable_unprepare(ssusb->sys_clk);
-sys_clk_err:
+	ssusb_clks_disable(ssusb);
+clks_err:
 	regulator_disable(ssusb->vusb33);
 vusb33_err:
-
 	return ret;
 }
 
 static void ssusb_rscs_exit(struct ssusb_mtk *ssusb)
 {
-	clk_disable_unprepare(ssusb->sys_clk);
-	clk_disable_unprepare(ssusb->ref_clk);
+	ssusb_clks_disable(ssusb);
 	regulator_disable(ssusb->vusb33);
 	ssusb_phy_power_off(ssusb);
 	ssusb_phy_exit(ssusb);
@@ -176,31 +202,17 @@ static void ssusb_ip_sw_reset(struct ssusb_mtk *ssusb)
 	mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
 }
 
-static int get_iddig_pinctrl(struct ssusb_mtk *ssusb)
+/* ignore the error if the clock does not exist */
+static struct clk *get_optional_clk(struct device *dev, const char *id)
 {
-	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
-
-	otg_sx->id_pinctrl = devm_pinctrl_get(ssusb->dev);
-	if (IS_ERR(otg_sx->id_pinctrl)) {
-		dev_err(ssusb->dev, "Cannot find id pinctrl!\n");
-		return PTR_ERR(otg_sx->id_pinctrl);
-	}
-
-	otg_sx->id_float =
-		pinctrl_lookup_state(otg_sx->id_pinctrl, "id_float");
-	if (IS_ERR(otg_sx->id_float)) {
-		dev_err(ssusb->dev, "Cannot find pinctrl id_float!\n");
-		return PTR_ERR(otg_sx->id_float);
-	}
+	struct clk *opt_clk;
 
-	otg_sx->id_ground =
-		pinctrl_lookup_state(otg_sx->id_pinctrl, "id_ground");
-	if (IS_ERR(otg_sx->id_ground)) {
-		dev_err(ssusb->dev, "Cannot find pinctrl id_ground!\n");
-		return PTR_ERR(otg_sx->id_ground);
-	}
+	opt_clk = devm_clk_get(dev, id);
+	/* ignore error number except EPROBE_DEFER */
+	if (IS_ERR(opt_clk) && (PTR_ERR(opt_clk) != -EPROBE_DEFER))
+		opt_clk = NULL;
 
-	return 0;
+	return opt_clk;
 }
 
 static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
@@ -225,18 +237,17 @@ static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
 		return PTR_ERR(ssusb->sys_clk);
 	}
 
-	/*
-	 * reference clock is usually a "fixed-clock", make it optional
-	 * for backward compatibility and ignore the error if it does
-	 * not exist.
-	 */
-	ssusb->ref_clk = devm_clk_get(dev, "ref_ck");
-	if (IS_ERR(ssusb->ref_clk)) {
-		if (PTR_ERR(ssusb->ref_clk) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
+	ssusb->ref_clk = get_optional_clk(dev, "ref_ck");
+	if (IS_ERR(ssusb->ref_clk))
+		return PTR_ERR(ssusb->ref_clk);
 
-		ssusb->ref_clk = NULL;
-	}
+	ssusb->mcu_clk = get_optional_clk(dev, "mcu_ck");
+	if (IS_ERR(ssusb->mcu_clk))
+		return PTR_ERR(ssusb->mcu_clk);
+
+	ssusb->dma_clk = get_optional_clk(dev, "dma_ck");
+	if (IS_ERR(ssusb->dma_clk))
+		return PTR_ERR(ssusb->dma_clk);
 
 	ssusb->num_phys = of_count_phandle_with_args(node,
 			"phys", "#phy-cells");
@@ -263,10 +274,8 @@ static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
 		return PTR_ERR(ssusb->ippc_base);
 
 	ssusb->dr_mode = usb_get_dr_mode(dev);
-	if (ssusb->dr_mode == USB_DR_MODE_UNKNOWN) {
-		dev_err(dev, "dr_mode is error\n");
-		return -EINVAL;
-	}
+	if (ssusb->dr_mode == USB_DR_MODE_UNKNOWN)
+		ssusb->dr_mode = USB_DR_MODE_OTG;
 
 	if (ssusb->dr_mode == USB_DR_MODE_PERIPHERAL)
 		return 0;
@@ -276,10 +285,10 @@ static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
 	if (ret)
 		return ret;
 
-	if (ssusb->dr_mode != USB_DR_MODE_OTG)
-		return 0;
+	/* optional property, ignore the error if it does not exist */
+	of_property_read_u32(node, "mediatek,u3p-dis-msk",
+			     &ssusb->u3p_dis_msk);
 
-	/* if dual-role mode is supported */
 	vbus = devm_regulator_get(&pdev->dev, "vbus");
 	if (IS_ERR(vbus)) {
 		dev_err(dev, "failed to get vbus\n");
@@ -287,6 +296,10 @@ static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
 	}
 	otg_sx->vbus = vbus;
 
+	if (ssusb->dr_mode == USB_DR_MODE_HOST)
+		return 0;
+
+	/* if dual-role mode is supported */
 	otg_sx->is_u3_drd = of_property_read_bool(node, "mediatek,usb3-drd");
 	otg_sx->manual_drd_enabled =
 		of_property_read_bool(node, "enable-manual-drd");
@@ -297,15 +310,11 @@ static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
 			dev_err(ssusb->dev, "couldn't get extcon device\n");
 			return -EPROBE_DEFER;
 		}
-		if (otg_sx->manual_drd_enabled) {
-			ret = get_iddig_pinctrl(ssusb);
-			if (ret)
-				return ret;
-		}
 	}
 
-	dev_info(dev, "dr_mode: %d, is_u3_dr: %d\n",
-		ssusb->dr_mode, otg_sx->is_u3_drd);
+	dev_info(dev, "dr_mode: %d, is_u3_dr: %d, u3p_dis_msk: %x, drd: %s\n",
+		ssusb->dr_mode, otg_sx->is_u3_drd, ssusb->u3p_dis_msk,
+		otg_sx->manual_drd_enabled ? "manual" : "auto");
 
 	return 0;
 }
@@ -447,8 +456,7 @@ static int __maybe_unused mtu3_suspend(struct device *dev)
 
 	ssusb_host_disable(ssusb, true);
 	ssusb_phy_power_off(ssusb);
-	clk_disable_unprepare(ssusb->sys_clk);
-	clk_disable_unprepare(ssusb->ref_clk);
+	ssusb_clks_disable(ssusb);
 	ssusb_wakeup_enable(ssusb);
 
 	return 0;
@@ -466,27 +474,21 @@ static int __maybe_unused mtu3_resume(struct device *dev)
 		return 0;
 
 	ssusb_wakeup_disable(ssusb);
-	ret = clk_prepare_enable(ssusb->sys_clk);
-	if (ret)
-		goto err_sys_clk;
-
-	ret = clk_prepare_enable(ssusb->ref_clk);
+	ret = ssusb_clks_enable(ssusb);
 	if (ret)
-		goto err_ref_clk;
+		goto clks_err;
 
 	ret = ssusb_phy_power_on(ssusb);
 	if (ret)
-		goto err_power_on;
+		goto phy_err;
 
 	ssusb_host_enable(ssusb);
 
 	return 0;
 
-err_power_on:
-	clk_disable_unprepare(ssusb->ref_clk);
-err_ref_clk:
-	clk_disable_unprepare(ssusb->sys_clk);
-err_sys_clk:
+phy_err:
+	ssusb_clks_disable(ssusb);
+clks_err:
 	return ret;
 }
 
diff --git a/drivers/usb/mtu3/mtu3_qmu.c b/drivers/usb/mtu3/mtu3_qmu.c
index 7d9ba8a52368..ff62ba232177 100644
--- a/drivers/usb/mtu3/mtu3_qmu.c
+++ b/drivers/usb/mtu3/mtu3_qmu.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * mtu3_qmu.c - Queue Management Unit driver for device controller
  *
  * Copyright (C) 2016 MediaTek Inc.
  *
  * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 /*
@@ -40,7 +31,58 @@
 #define GPD_FLAGS_IOC	BIT(7)
 
 #define GPD_EXT_FLAG_ZLP	BIT(5)
+#define GPD_EXT_NGP(x)		(((x) & 0xf) << 4)
+#define GPD_EXT_BUF(x)		(((x) & 0xf) << 0)
+
+#define HILO_GEN64(hi, lo) (((u64)(hi) << 32) + (lo))
+#define HILO_DMA(hi, lo)	\
+	((dma_addr_t)HILO_GEN64((le32_to_cpu(hi)), (le32_to_cpu(lo))))
+
+static dma_addr_t read_txq_cur_addr(void __iomem *mbase, u8 epnum)
+{
+	u32 txcpr;
+	u32 txhiar;
+
+	txcpr = mtu3_readl(mbase, USB_QMU_TQCPR(epnum));
+	txhiar = mtu3_readl(mbase, USB_QMU_TQHIAR(epnum));
 
+	return HILO_DMA(QMU_CUR_GPD_ADDR_HI(txhiar), txcpr);
+}
+
+static dma_addr_t read_rxq_cur_addr(void __iomem *mbase, u8 epnum)
+{
+	u32 rxcpr;
+	u32 rxhiar;
+
+	rxcpr = mtu3_readl(mbase, USB_QMU_RQCPR(epnum));
+	rxhiar = mtu3_readl(mbase, USB_QMU_RQHIAR(epnum));
+
+	return HILO_DMA(QMU_CUR_GPD_ADDR_HI(rxhiar), rxcpr);
+}
+
+static void write_txq_start_addr(void __iomem *mbase, u8 epnum, dma_addr_t dma)
+{
+	u32 tqhiar;
+
+	mtu3_writel(mbase, USB_QMU_TQSAR(epnum),
+		    cpu_to_le32(lower_32_bits(dma)));
+	tqhiar = mtu3_readl(mbase, USB_QMU_TQHIAR(epnum));
+	tqhiar &= ~QMU_START_ADDR_HI_MSK;
+	tqhiar |= QMU_START_ADDR_HI(upper_32_bits(dma));
+	mtu3_writel(mbase, USB_QMU_TQHIAR(epnum), tqhiar);
+}
+
+static void write_rxq_start_addr(void __iomem *mbase, u8 epnum, dma_addr_t dma)
+{
+	u32 rqhiar;
+
+	mtu3_writel(mbase, USB_QMU_RQSAR(epnum),
+		    cpu_to_le32(lower_32_bits(dma)));
+	rqhiar = mtu3_readl(mbase, USB_QMU_RQHIAR(epnum));
+	rqhiar &= ~QMU_START_ADDR_HI_MSK;
+	rqhiar |= QMU_START_ADDR_HI(upper_32_bits(dma));
+	mtu3_writel(mbase, USB_QMU_RQHIAR(epnum), rqhiar);
+}
 
 static struct qmu_gpd *gpd_dma_to_virt(struct mtu3_gpd_ring *ring,
 		dma_addr_t dma_addr)
@@ -193,21 +235,27 @@ static int mtu3_prepare_tx_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq)
 	struct mtu3_gpd_ring *ring = &mep->gpd_ring;
 	struct qmu_gpd *gpd = ring->enqueue;
 	struct usb_request *req = &mreq->request;
+	dma_addr_t enq_dma;
+	u16 ext_addr;
 
 	/* set all fields to zero as default value */
 	memset(gpd, 0, sizeof(*gpd));
 
-	gpd->buffer = cpu_to_le32((u32)req->dma);
+	gpd->buffer = cpu_to_le32(lower_32_bits(req->dma));
+	ext_addr = GPD_EXT_BUF(upper_32_bits(req->dma));
 	gpd->buf_len = cpu_to_le16(req->length);
 	gpd->flag |= GPD_FLAGS_IOC;
 
 	/* get the next GPD */
 	enq = advance_enq_gpd(ring);
-	dev_dbg(mep->mtu->dev, "TX-EP%d queue gpd=%p, enq=%p\n",
-		mep->epnum, gpd, enq);
+	enq_dma = gpd_virt_to_dma(ring, enq);
+	dev_dbg(mep->mtu->dev, "TX-EP%d queue gpd=%p, enq=%p, qdma=%pad\n",
+		mep->epnum, gpd, enq, &enq_dma);
 
 	enq->flag &= ~GPD_FLAGS_HWO;
-	gpd->next_gpd = cpu_to_le32((u32)gpd_virt_to_dma(ring, enq));
+	gpd->next_gpd = cpu_to_le32(lower_32_bits(enq_dma));
+	ext_addr |= GPD_EXT_NGP(upper_32_bits(enq_dma));
+	gpd->tx_ext_addr = cpu_to_le16(ext_addr);
 
 	if (req->zero)
 		gpd->ext_flag |= GPD_EXT_FLAG_ZLP;
@@ -226,21 +274,27 @@ static int mtu3_prepare_rx_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq)
 	struct mtu3_gpd_ring *ring = &mep->gpd_ring;
 	struct qmu_gpd *gpd = ring->enqueue;
 	struct usb_request *req = &mreq->request;
+	dma_addr_t enq_dma;
+	u16 ext_addr;
 
 	/* set all fields to zero as default value */
 	memset(gpd, 0, sizeof(*gpd));
 
-	gpd->buffer = cpu_to_le32((u32)req->dma);
+	gpd->buffer = cpu_to_le32(lower_32_bits(req->dma));
+	ext_addr = GPD_EXT_BUF(upper_32_bits(req->dma));
 	gpd->data_buf_len = cpu_to_le16(req->length);
 	gpd->flag |= GPD_FLAGS_IOC;
 
 	/* get the next GPD */
 	enq = advance_enq_gpd(ring);
-	dev_dbg(mep->mtu->dev, "RX-EP%d queue gpd=%p, enq=%p\n",
-		mep->epnum, gpd, enq);
+	enq_dma = gpd_virt_to_dma(ring, enq);
+	dev_dbg(mep->mtu->dev, "RX-EP%d queue gpd=%p, enq=%p, qdma=%pad\n",
+		mep->epnum, gpd, enq, &enq_dma);
 
 	enq->flag &= ~GPD_FLAGS_HWO;
-	gpd->next_gpd = cpu_to_le32((u32)gpd_virt_to_dma(ring, enq));
+	gpd->next_gpd = cpu_to_le32(lower_32_bits(enq_dma));
+	ext_addr |= GPD_EXT_NGP(upper_32_bits(enq_dma));
+	gpd->rx_ext_addr = cpu_to_le16(ext_addr);
 	gpd->chksum = qmu_calc_checksum((u8 *)gpd);
 	gpd->flag |= GPD_FLAGS_HWO;
 
@@ -267,8 +321,8 @@ int mtu3_qmu_start(struct mtu3_ep *mep)
 
 	if (mep->is_in) {
 		/* set QMU start address */
-		mtu3_writel(mbase, USB_QMU_TQSAR(mep->epnum), ring->dma);
-		mtu3_setbits(mbase, MU3D_EP_TXCR0(mep->epnum), TX_DMAREQEN);
+		write_txq_start_addr(mbase, epnum, ring->dma);
+		mtu3_setbits(mbase, MU3D_EP_TXCR0(epnum), TX_DMAREQEN);
 		mtu3_setbits(mbase, U3D_QCR0, QMU_TX_CS_EN(epnum));
 		/* send zero length packet according to ZLP flag in GPD */
 		mtu3_setbits(mbase, U3D_QCR1, QMU_TX_ZLP(epnum));
@@ -282,8 +336,8 @@ int mtu3_qmu_start(struct mtu3_ep *mep)
 		mtu3_writel(mbase, USB_QMU_TQCSR(epnum), QMU_Q_START);
 
 	} else {
-		mtu3_writel(mbase, USB_QMU_RQSAR(mep->epnum), ring->dma);
-		mtu3_setbits(mbase, MU3D_EP_RXCR0(mep->epnum), RX_DMAREQEN);
+		write_rxq_start_addr(mbase, epnum, ring->dma);
+		mtu3_setbits(mbase, MU3D_EP_RXCR0(epnum), RX_DMAREQEN);
 		mtu3_setbits(mbase, U3D_QCR0, QMU_RX_CS_EN(epnum));
 		/* don't expect ZLP */
 		mtu3_clrbits(mbase, U3D_QCR3, QMU_RX_ZLP(epnum));
@@ -353,9 +407,9 @@ static void qmu_tx_zlp_error_handler(struct mtu3 *mtu, u8 epnum)
 	struct mtu3_gpd_ring *ring = &mep->gpd_ring;
 	void __iomem *mbase = mtu->mac_base;
 	struct qmu_gpd *gpd_current = NULL;
-	dma_addr_t gpd_dma = mtu3_readl(mbase, USB_QMU_TQCPR(epnum));
 	struct usb_request *req = NULL;
 	struct mtu3_request *mreq;
+	dma_addr_t cur_gpd_dma;
 	u32 txcsr = 0;
 	int ret;
 
@@ -365,7 +419,8 @@ static void qmu_tx_zlp_error_handler(struct mtu3 *mtu, u8 epnum)
 	else
 		return;
 
-	gpd_current = gpd_dma_to_virt(ring, gpd_dma);
+	cur_gpd_dma = read_txq_cur_addr(mbase, epnum);
+	gpd_current = gpd_dma_to_virt(ring, cur_gpd_dma);
 
 	if (le16_to_cpu(gpd_current->buf_len) != 0) {
 		dev_err(mtu->dev, "TX EP%d buffer length error(!=0)\n", epnum);
@@ -408,12 +463,13 @@ static void qmu_done_tx(struct mtu3 *mtu, u8 epnum)
 	void __iomem *mbase = mtu->mac_base;
 	struct qmu_gpd *gpd = ring->dequeue;
 	struct qmu_gpd *gpd_current = NULL;
-	dma_addr_t gpd_dma = mtu3_readl(mbase, USB_QMU_TQCPR(epnum));
 	struct usb_request *request = NULL;
 	struct mtu3_request *mreq;
+	dma_addr_t cur_gpd_dma;
 
 	/*transfer phy address got from QMU register to virtual address */
-	gpd_current = gpd_dma_to_virt(ring, gpd_dma);
+	cur_gpd_dma = read_txq_cur_addr(mbase, epnum);
+	gpd_current = gpd_dma_to_virt(ring, cur_gpd_dma);
 
 	dev_dbg(mtu->dev, "%s EP%d, last=%p, current=%p, enq=%p\n",
 		__func__, epnum, gpd, gpd_current, ring->enqueue);
@@ -446,11 +502,12 @@ static void qmu_done_rx(struct mtu3 *mtu, u8 epnum)
 	void __iomem *mbase = mtu->mac_base;
 	struct qmu_gpd *gpd = ring->dequeue;
 	struct qmu_gpd *gpd_current = NULL;
-	dma_addr_t gpd_dma = mtu3_readl(mbase, USB_QMU_RQCPR(epnum));
 	struct usb_request *req = NULL;
 	struct mtu3_request *mreq;
+	dma_addr_t cur_gpd_dma;
 
-	gpd_current = gpd_dma_to_virt(ring, gpd_dma);
+	cur_gpd_dma = read_rxq_cur_addr(mbase, epnum);
+	gpd_current = gpd_dma_to_virt(ring, cur_gpd_dma);
 
 	dev_dbg(mtu->dev, "%s EP%d, last=%p, current=%p, enq=%p\n",
 		__func__, epnum, gpd, gpd_current, ring->enqueue);
diff --git a/drivers/usb/mtu3/mtu3_qmu.h b/drivers/usb/mtu3/mtu3_qmu.h
index 4dafa16bf120..81f5151a55ed 100644
--- a/drivers/usb/mtu3/mtu3_qmu.h
+++ b/drivers/usb/mtu3/mtu3_qmu.h
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * mtu3_qmu.h - Queue Management Unit driver header
  *
  * Copyright (C) 2016 MediaTek Inc.
  *
  * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef __MTK_QMU_H__
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 02fbb4fe3745..0ad664efda6b 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 
 /*
  * Texas Instruments AM35x "glue layer"
@@ -8,23 +9,6 @@
  * Copyright (c) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
  *
  * This file is part of the Inventra Controller Driver for Linux.
- *
- * The Inventra Controller Driver for Linux is free software; you
- * can redistribute it and/or modify it under the terms of the GNU
- * General Public License version 2 as published by the Free Software
- * Foundation.
- *
- * The Inventra Controller Driver for Linux is distributed in
- * the hope that it will be useful, but WITHOUT ANY WARRANTY;
- * without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
- * License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with The Inventra Controller Driver for Linux ; if not,
- * write to the Free Software Foundation, Inc., 59 Temple Place,
- * Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #include <linux/module.h>
@@ -133,11 +117,9 @@ static void am35x_musb_set_vbus(struct musb *musb, int is_on)
 
 #define	POLL_SECONDS	2
 
-static struct timer_list otg_workaround;
-
-static void otg_timer(unsigned long _musb)
+static void otg_timer(struct timer_list *t)
 {
-	struct musb		*musb = (void *)_musb;
+	struct musb		*musb = from_timer(musb, t, dev_timer);
 	void __iomem		*mregs = musb->mregs;
 	u8			devctl;
 	unsigned long		flags;
@@ -173,7 +155,7 @@ static void otg_timer(unsigned long _musb)
 	case OTG_STATE_B_IDLE:
 		devctl = musb_readb(mregs, MUSB_DEVCTL);
 		if (devctl & MUSB_DEVCTL_BDEVICE)
-			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+			mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
 		else
 			musb->xceiv->otg->state = OTG_STATE_A_IDLE;
 		break;
@@ -195,12 +177,12 @@ static void am35x_musb_try_idle(struct musb *musb, unsigned long timeout)
 				musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON)) {
 		dev_dbg(musb->controller, "%s active, deleting timer\n",
 			usb_otg_state_string(musb->xceiv->otg->state));
-		del_timer(&otg_workaround);
+		del_timer(&musb->dev_timer);
 		last_timer = jiffies;
 		return;
 	}
 
-	if (time_after(last_timer, timeout) && timer_pending(&otg_workaround)) {
+	if (time_after(last_timer, timeout) && timer_pending(&musb->dev_timer)) {
 		dev_dbg(musb->controller, "Longer idle timer already pending, ignoring...\n");
 		return;
 	}
@@ -209,7 +191,7 @@ static void am35x_musb_try_idle(struct musb *musb, unsigned long timeout)
 	dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
 		usb_otg_state_string(musb->xceiv->otg->state),
 		jiffies_to_msecs(timeout - jiffies));
-	mod_timer(&otg_workaround, timeout);
+	mod_timer(&musb->dev_timer, timeout);
 }
 
 static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
@@ -278,14 +260,14 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
 			 */
 			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
 			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
-			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+			mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
 			WARNING("VBUS error workaround (delay coming)\n");
 		} else if (drvvbus) {
 			MUSB_HST_MODE(musb);
 			otg->default_a = 1;
 			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
 			portstate(musb->port1_status |= USB_PORT_STAT_POWER);
-			del_timer(&otg_workaround);
+			del_timer(&musb->dev_timer);
 		} else {
 			musb->is_active = 0;
 			MUSB_DEV_MODE(musb);
@@ -324,7 +306,7 @@ eoi:
 
 	/* Poll for ID change */
 	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE)
-		mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+		mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
 
 	spin_unlock_irqrestore(&musb->lock, flags);
 
@@ -365,7 +347,7 @@ static int am35x_musb_init(struct musb *musb)
 	if (IS_ERR_OR_NULL(musb->xceiv))
 		return -EPROBE_DEFER;
 
-	setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
+	timer_setup(&musb->dev_timer, otg_timer, 0);
 
 	/* Reset the musb */
 	if (data->reset)
@@ -395,7 +377,7 @@ static int am35x_musb_exit(struct musb *musb)
 	struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
 	struct omap_musb_board_data *data = plat->board_data;
 
-	del_timer_sync(&otg_workaround);
+	del_timer_sync(&musb->dev_timer);
 
 	/* Shutdown the on-chip PHY and its PLL. */
 	if (data->set_phy_power)
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 4418574a36a1..0a98dcd66d19 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * MUSB OTG controller driver for Blackfin Processors
  *
  * Copyright 2006-2008 Analog Devices Inc.
  *
  * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
  */
 
 #include <linux/module.h>
@@ -223,7 +222,7 @@ static irqreturn_t blackfin_interrupt(int irq, void *__hci)
 	if ((musb->xceiv->otg->state == OTG_STATE_B_IDLE
 		|| musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON) ||
 		(musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb))) {
-		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
+		mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY);
 		musb->a_wait_bcon = TIMER_DELAY;
 	}
 
@@ -232,9 +231,9 @@ static irqreturn_t blackfin_interrupt(int irq, void *__hci)
 	return retval;
 }
 
-static void musb_conn_timer_handler(unsigned long _musb)
+static void musb_conn_timer_handler(struct timer_list *t)
 {
-	struct musb *musb = (void *)_musb;
+	struct musb *musb = from_timer(musb, t, dev_timer);
 	unsigned long flags;
 	u16 val;
 	static u8 toggle;
@@ -266,7 +265,7 @@ static void musb_conn_timer_handler(unsigned long _musb)
 			musb_writeb(musb->mregs, MUSB_INTRUSB, val);
 			musb->xceiv->otg->state = OTG_STATE_B_IDLE;
 		}
-		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
+		mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY);
 		break;
 	case OTG_STATE_B_IDLE:
 		/*
@@ -310,7 +309,7 @@ static void musb_conn_timer_handler(unsigned long _musb)
 			 * shortening it, if accelerating A-plug detection
 			 * is needed in OTG mode.
 			 */
-			mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY / 4);
+			mod_timer(&musb->dev_timer, jiffies + TIMER_DELAY / 4);
 		}
 		break;
 	default:
@@ -445,8 +444,7 @@ static int bfin_musb_init(struct musb *musb)
 
 	bfin_musb_reg_init(musb);
 
-	setup_timer(&musb_conn_timer, musb_conn_timer_handler,
-			(unsigned long) musb);
+	timer_setup(&musb->dev_timer, musb_conn_timer_handler, 0);
 
 	musb->xceiv->set_power = bfin_musb_set_power;
 
diff --git a/drivers/usb/musb/blackfin.h b/drivers/usb/musb/blackfin.h
index c84dae546dc6..5b149915b0f8 100644
--- a/drivers/usb/musb/blackfin.h
+++ b/drivers/usb/musb/blackfin.h
@@ -1,10 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2007 by Analog Devices, Inc.
- *
- * The Inventra Controller Driver for Linux is free software; you
- * can redistribute it and/or modify it under the terms of the GNU
- * General Public License version 2 as published by the Free Software
- * Foundation.
  */
 
 #ifndef __MUSB_BLACKFIN_H__
@@ -82,6 +78,4 @@ static void dump_fifo_data(u8 *buf, u16 len)
 /* Almost 1 second */
 #define TIMER_DELAY	(1 * HZ)
 
-static struct timer_list musb_conn_timer;
-
 #endif	/* __MUSB_BLACKFIN_H__ */
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index a13bd3625043..b4d6d9bb3239 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2005-2006 by Texas Instruments
  *
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index df88123274ca..0397606a211b 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Texas Instruments DA8xx/OMAP-L1x "glue layer"
  *
@@ -10,23 +11,6 @@
  * Copyright (c) 2016 Petr Kulhavy <petr@barix.com>
  *
  * This file is part of the Inventra Controller Driver for Linux.
- *
- * The Inventra Controller Driver for Linux is free software; you
- * can redistribute it and/or modify it under the terms of the GNU
- * General Public License version 2 as published by the Free Software
- * Foundation.
- *
- * The Inventra Controller Driver for Linux is distributed in
- * the hope that it will be useful, but WITHOUT ANY WARRANTY;
- * without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
- * License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with The Inventra Controller Driver for Linux ; if not,
- * write to the Free Software Foundation, Inc., 59 Temple Place,
- * Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #include <linux/module.h>
@@ -50,10 +34,7 @@
 #define DA8XX_USB_CTRL_REG	0x04
 #define DA8XX_USB_STAT_REG	0x08
 #define DA8XX_USB_EMULATION_REG 0x0c
-#define DA8XX_USB_MODE_REG	0x10	/* Transparent, CDC, [Generic] RNDIS */
-#define DA8XX_USB_AUTOREQ_REG	0x14
 #define DA8XX_USB_SRP_FIX_TIME_REG 0x18
-#define DA8XX_USB_TEARDOWN_REG	0x1c
 #define DA8XX_USB_INTR_SRC_REG	0x20
 #define DA8XX_USB_INTR_SRC_SET_REG 0x24
 #define DA8XX_USB_INTR_SRC_CLEAR_REG 0x28
@@ -138,11 +119,9 @@ static void da8xx_musb_set_vbus(struct musb *musb, int is_on)
 
 #define	POLL_SECONDS	2
 
-static struct timer_list otg_workaround;
-
-static void otg_timer(unsigned long _musb)
+static void otg_timer(struct timer_list *t)
 {
-	struct musb		*musb = (void *)_musb;
+	struct musb		*musb = from_timer(musb, t, dev_timer);
 	void __iomem		*mregs = musb->mregs;
 	u8			devctl;
 	unsigned long		flags;
@@ -178,7 +157,7 @@ static void otg_timer(unsigned long _musb)
 		 * VBUSERR got reported during enumeration" cases.
 		 */
 		if (devctl & MUSB_DEVCTL_VBUS) {
-			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+			mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
 			break;
 		}
 		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
@@ -201,7 +180,7 @@ static void otg_timer(unsigned long _musb)
 		musb_writeb(mregs, MUSB_DEVCTL, devctl | MUSB_DEVCTL_SESSION);
 		devctl = musb_readb(mregs, MUSB_DEVCTL);
 		if (devctl & MUSB_DEVCTL_BDEVICE)
-			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+			mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
 		else
 			musb->xceiv->otg->state = OTG_STATE_A_IDLE;
 		break;
@@ -223,12 +202,12 @@ static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout)
 				musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON)) {
 		dev_dbg(musb->controller, "%s active, deleting timer\n",
 			usb_otg_state_string(musb->xceiv->otg->state));
-		del_timer(&otg_workaround);
+		del_timer(&musb->dev_timer);
 		last_timer = jiffies;
 		return;
 	}
 
-	if (time_after(last_timer, timeout) && timer_pending(&otg_workaround)) {
+	if (time_after(last_timer, timeout) && timer_pending(&musb->dev_timer)) {
 		dev_dbg(musb->controller, "Longer idle timer already pending, ignoring...\n");
 		return;
 	}
@@ -237,7 +216,7 @@ static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout)
 	dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
 		usb_otg_state_string(musb->xceiv->otg->state),
 		jiffies_to_msecs(timeout - jiffies));
-	mod_timer(&otg_workaround, timeout);
+	mod_timer(&musb->dev_timer, timeout);
 }
 
 static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
@@ -297,14 +276,14 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
 			 */
 			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
 			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
-			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+			mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
 			WARNING("VBUS error workaround (delay coming)\n");
 		} else if (drvvbus) {
 			MUSB_HST_MODE(musb);
 			otg->default_a = 1;
 			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
 			portstate(musb->port1_status |= USB_PORT_STAT_POWER);
-			del_timer(&otg_workaround);
+			del_timer(&musb->dev_timer);
 		} else {
 			musb->is_active = 0;
 			MUSB_DEV_MODE(musb);
@@ -331,7 +310,7 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
 
 	/* Poll for ID change */
 	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE)
-		mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+		mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
 
 	spin_unlock_irqrestore(&musb->lock, flags);
 
@@ -393,7 +372,7 @@ static int da8xx_musb_init(struct musb *musb)
 		goto fail;
 	}
 
-	setup_timer(&otg_workaround, otg_timer, (unsigned long)musb);
+	timer_setup(&musb->dev_timer, otg_timer, 0);
 
 	/* Reset the controller */
 	musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK);
@@ -431,7 +410,7 @@ static int da8xx_musb_exit(struct musb *musb)
 {
 	struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent);
 
-	del_timer_sync(&otg_workaround);
+	del_timer_sync(&musb->dev_timer);
 
 	phy_power_off(glue->phy);
 	phy_exit(glue->phy);
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 52b491d3d5d8..2ad39dcd2f4c 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -1,24 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2005-2006 by Texas Instruments
  *
  * This file is part of the Inventra Controller Driver for Linux.
- *
- * The Inventra Controller Driver for Linux is free software; you
- * can redistribute it and/or modify it under the terms of the GNU
- * General Public License version 2 as published by the Free Software
- * Foundation.
- *
- * The Inventra Controller Driver for Linux is distributed in
- * the hope that it will be useful, but WITHOUT ANY WARRANTY;
- * without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
- * License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with The Inventra Controller Driver for Linux ; if not,
- * write to the Free Software Foundation, Inc., 59 Temple Place,
- * Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #include <linux/module.h>
@@ -199,11 +183,9 @@ static void davinci_musb_set_vbus(struct musb *musb, int is_on)
 
 #define	POLL_SECONDS	2
 
-static struct timer_list otg_workaround;
-
-static void otg_timer(unsigned long _musb)
+static void otg_timer(struct timer_list *t)
 {
-	struct musb		*musb = (void *)_musb;
+	struct musb		*musb = from_timer(musb, t, dev_timer);
 	void __iomem		*mregs = musb->mregs;
 	u8			devctl;
 	unsigned long		flags;
@@ -224,7 +206,7 @@ static void otg_timer(unsigned long _musb)
 		 * VBUSERR got reported during enumeration" cases.
 		 */
 		if (devctl & MUSB_DEVCTL_VBUS) {
-			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+			mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
 			break;
 		}
 		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
@@ -248,7 +230,7 @@ static void otg_timer(unsigned long _musb)
 				devctl | MUSB_DEVCTL_SESSION);
 		devctl = musb_readb(mregs, MUSB_DEVCTL);
 		if (devctl & MUSB_DEVCTL_BDEVICE)
-			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+			mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
 		else
 			musb->xceiv->otg->state = OTG_STATE_A_IDLE;
 		break;
@@ -325,14 +307,14 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci)
 			 */
 			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
 			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
-			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+			mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
 			WARNING("VBUS error workaround (delay coming)\n");
 		} else if (drvvbus) {
 			MUSB_HST_MODE(musb);
 			otg->default_a = 1;
 			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
 			portstate(musb->port1_status |= USB_PORT_STAT_POWER);
-			del_timer(&otg_workaround);
+			del_timer(&musb->dev_timer);
 		} else {
 			musb->is_active = 0;
 			MUSB_DEV_MODE(musb);
@@ -361,7 +343,7 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci)
 
 	/* poll for ID change */
 	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE)
-		mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+		mod_timer(&musb->dev_timer, jiffies + POLL_SECONDS * HZ);
 
 	spin_unlock_irqrestore(&musb->lock, flags);
 
@@ -393,7 +375,7 @@ static int davinci_musb_init(struct musb *musb)
 	if (revision == 0)
 		goto fail;
 
-	setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
+	timer_setup(&musb->dev_timer, otg_timer, 0);
 
 	davinci_musb_source_power(musb, 0, 1);
 
@@ -443,7 +425,7 @@ unregister:
 
 static int davinci_musb_exit(struct musb *musb)
 {
-	del_timer_sync(&otg_workaround);
+	del_timer_sync(&musb->dev_timer);
 
 	/* force VBUS off */
 	if (cpu_is_davinci_dm355()) {
diff --git a/drivers/usb/musb/davinci.h b/drivers/usb/musb/davinci.h
index 371baa0ee509..e021485c83ae 100644
--- a/drivers/usb/musb/davinci.h
+++ b/drivers/usb/musb/davinci.h
@@ -1,10 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2005-2006 by Texas Instruments
- *
- * The Inventra Controller Driver for Linux is free software; you
- * can redistribute it and/or modify it under the terms of the GNU
- * General Public License version 2 as published by the Free Software
- * Foundation.
  */
 
 #ifndef __MUSB_HDRDF_H__
diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
index 40c68c23d553..04d8b2bc205a 100644
--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Ingenic JZ4740 "glue layer"
  *
  * Copyright (C) 2013, Apelete Seketeli <apelete@seketeli.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/clk.h>
diff --git a/drivers/usb/musb/musb_am335x.c b/drivers/usb/musb/musb_am335x.c
index 1e58ed2361cc..5f04f8e3a640 100644
--- a/drivers/usb/musb/musb_am335x.c
+++ b/drivers/usb/musb/musb_am335x.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/module.h>
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index ff5a1a8989d5..ea5013aa69e2 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1,35 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MUSB OTG driver core code
  *
  * Copyright 2005 Mentor Graphics Corporation
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 
 /*
@@ -485,9 +460,9 @@ void musb_load_testpacket(struct musb *musb)
 /*
  * Handles OTG hnp timeouts, such as b_ase0_brst
  */
-static void musb_otg_timer_func(unsigned long data)
+static void musb_otg_timer_func(struct timer_list *t)
 {
-	struct musb	*musb = (struct musb *)data;
+	struct musb	*musb = from_timer(musb, t, otg_timer);
 	unsigned long	flags;
 
 	spin_lock_irqsave(&musb->lock, flags);
@@ -767,6 +742,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		case OTG_STATE_B_IDLE:
 			if (!musb->is_active)
 				break;
+			/* fall through */
 		case OTG_STATE_B_PERIPHERAL:
 			musb_g_suspend(musb);
 			musb->is_active = musb->g.b_hnp_enable;
@@ -2330,7 +2306,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	if (status < 0)
 		goto fail3;
 
-	setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
+	timer_setup(&musb->otg_timer, musb_otg_timer_func, 0);
 
 	/* attach to the IRQ */
 	if (request_irq(nIrq, musb->isr, IRQF_SHARED, dev_name(dev), musb)) {
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 20f4614178d9..385841ee6f46 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -1,35 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MUSB OTG driver defines
  *
  * Copyright 2005 Mentor Graphics Corporation
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 
 #ifndef __MUSB_CORE_H__
@@ -345,6 +320,7 @@ struct musb {
 	struct list_head	pending_list;	/* pending work list */
 
 	struct timer_list	otg_timer;
+	struct timer_list	dev_timer;
 	struct notifier_block	nb;
 
 	struct dma_controller	*dma_controller;
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index 1ec0a4947b6b..d0dd4f470bbe 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h
index 9a78877a8afe..5e0f079dde21 100644
--- a/drivers/usb/musb/musb_debug.h
+++ b/drivers/usb/musb/musb_debug.h
@@ -1,35 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MUSB OTG driver debug defines
  *
  * Copyright 2005 Mentor Graphics Corporation
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 
 #ifndef __MUSB_LINUX_DEBUG_H__
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index 952733ceaac8..7cf5a1bbdaff 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -1,34 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MUSB OTG driver debugfs support
  *
  * Copyright 2010 Nokia Corporation
  * Contact: Felipe Balbi <felipe.balbi@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
index 04c3bd86bd62..a4241f4d430e 100644
--- a/drivers/usb/musb/musb_dma.h
+++ b/drivers/usb/musb/musb_dma.h
@@ -1,35 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MUSB OTG driver DMA controller abstraction
  *
  * Copyright 2005 Mentor Graphics Corporation
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 
 #ifndef __MUSB_DMA_H__
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index f6b526606ad1..05a679d5e3a2 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Texas Instruments DSPS platforms "glue layer"
  *
@@ -7,22 +8,6 @@
  *
  * This file is part of the Inventra Controller Driver for Linux.
  *
- * The Inventra Controller Driver for Linux is free software; you
- * can redistribute it and/or modify it under the terms of the GNU
- * General Public License version 2 as published by the Free Software
- * Foundation.
- *
- * The Inventra Controller Driver for Linux is distributed in
- * the hope that it will be useful, but WITHOUT ANY WARRANTY;
- * without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
- * License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with The Inventra Controller Driver for Linux ; if not,
- * write to the Free Software Foundation, Inc., 59 Temple Place,
- * Suite 330, Boston, MA  02111-1307  USA
- *
  * musb_dsps.c will be a common file for all the TI DSPS platforms
  * such as dm64x, dm36x, dm35x, da8x, am35x and ti81x.
  * For now only ti81x is using this and in future davinci.c, am35x.c
@@ -119,7 +104,6 @@ struct dsps_glue {
 	struct platform_device *musb;	/* child musb pdev */
 	const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */
 	int vbus_irq;			/* optional vbus irq */
-	struct timer_list timer;	/* otg_workaround timer */
 	unsigned long last_timer;    /* last timer data for each instance */
 	bool sw_babble_enabled;
 	void __iomem *usbss_base;
@@ -149,6 +133,7 @@ static const struct debugfs_reg32 dsps_musb_regs[] = {
 
 static void dsps_mod_timer(struct dsps_glue *glue, int wait_ms)
 {
+	struct musb *musb = platform_get_drvdata(glue->musb);
 	int wait;
 
 	if (wait_ms < 0)
@@ -156,7 +141,7 @@ static void dsps_mod_timer(struct dsps_glue *glue, int wait_ms)
 	else
 		wait = msecs_to_jiffies(wait_ms);
 
-	mod_timer(&glue->timer, jiffies + wait);
+	mod_timer(&musb->dev_timer, jiffies + wait);
 }
 
 /*
@@ -216,7 +201,7 @@ static void dsps_musb_disable(struct musb *musb)
 	musb_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap);
 	musb_writel(reg_base, wrp->epintr_clear,
 			 wrp->txep_bitmap | wrp->rxep_bitmap);
-	del_timer_sync(&glue->timer);
+	del_timer_sync(&musb->dev_timer);
 }
 
 /* Caller must take musb->lock */
@@ -230,7 +215,7 @@ static int dsps_check_status(struct musb *musb, void *unused)
 	int skip_session = 0;
 
 	if (glue->vbus_irq)
-		del_timer(&glue->timer);
+		del_timer(&musb->dev_timer);
 
 	/*
 	 * We poll because DSPS IP's won't expose several OTG-critical
@@ -282,9 +267,9 @@ static int dsps_check_status(struct musb *musb, void *unused)
 	return 0;
 }
 
-static void otg_timer(unsigned long _musb)
+static void otg_timer(struct timer_list *t)
 {
-	struct musb *musb = (void *)_musb;
+	struct musb *musb = from_timer(musb, t, dev_timer);
 	struct device *dev = musb->controller;
 	unsigned long flags;
 	int err;
@@ -480,7 +465,7 @@ static int dsps_musb_init(struct musb *musb)
 		}
 	}
 
-	setup_timer(&glue->timer, otg_timer, (unsigned long) musb);
+	timer_setup(&musb->dev_timer, otg_timer, 0);
 
 	/* Reset the musb */
 	musb_writel(reg_base, wrp->control, (1 << wrp->reset));
@@ -515,7 +500,7 @@ static int dsps_musb_exit(struct musb *musb)
 	struct device *dev = musb->controller;
 	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
 
-	del_timer_sync(&glue->timer);
+	del_timer_sync(&musb->dev_timer);
 	usb_phy_shutdown(musb->xceiv);
 	phy_power_off(musb->phy);
 	phy_exit(musb->phy);
@@ -1027,7 +1012,7 @@ static int dsps_suspend(struct device *dev)
 		return ret;
 	}
 
-	del_timer_sync(&glue->timer);
+	del_timer_sync(&musb->dev_timer);
 
 	mbase = musb->ctrl_base;
 	glue->context.control = musb_readl(mbase, wrp->control);
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index bc6d1717c9ec..293e5b8da565 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MUSB OTG driver peripheral support
  *
@@ -5,32 +6,6 @@
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
  * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h
index 0314dfc770c7..9c34aca06db6 100644
--- a/drivers/usb/musb/musb_gadget.h
+++ b/drivers/usb/musb/musb_gadget.h
@@ -1,35 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MUSB OTG driver peripheral defines
  *
  * Copyright 2005 Mentor Graphics Corporation
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 
 #ifndef __MUSB_GADGET_H
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 844a309fe895..18da4873e52e 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MUSB OTG peripheral driver ep0 handling
  *
@@ -5,32 +6,6 @@
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
  * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index b17450a59882..2627363fb4fe 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MUSB OTG driver host support
  *
@@ -5,32 +6,6 @@
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
  * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
index 7bbf01bf4bb0..72392bbcd0a4 100644
--- a/drivers/usb/musb/musb_host.h
+++ b/drivers/usb/musb/musb_host.h
@@ -1,35 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MUSB OTG driver host defines
  *
  * Copyright 2005 Mentor Graphics Corporation
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 
 #ifndef _MUSB_HOST_H
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
index 17a80ae20674..b7025b2e6e00 100644
--- a/drivers/usb/musb/musb_io.h
+++ b/drivers/usb/musb/musb_io.h
@@ -1,35 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MUSB OTG driver register I/O
  *
  * Copyright 2005 Mentor Graphics Corporation
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 
 #ifndef __MUSB_LINUX_PLATFORM_ARCH_H__
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index cff5bcf0d00f..a4beba184798 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -1,35 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MUSB OTG driver register defines
  *
  * Copyright 2005 Mentor Graphics Corporation
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 
 #ifndef __MUSB_REGS_H__
diff --git a/drivers/usb/musb/musb_trace.c b/drivers/usb/musb/musb_trace.c
index 70973d901a21..476872adce80 100644
--- a/drivers/usb/musb/musb_trace.c
+++ b/drivers/usb/musb/musb_trace.c
@@ -1,18 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * musb_trace.c - MUSB Controller Trace Support
  *
  * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
  *
  * Author: Bin Liu <b-liu@ti.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #define CREATE_TRACE_POINTS
diff --git a/drivers/usb/musb/musb_trace.h b/drivers/usb/musb/musb_trace.h
index f031c9e74322..a97d618fe8ff 100644
--- a/drivers/usb/musb/musb_trace.h
+++ b/drivers/usb/musb/musb_trace.h
@@ -1,18 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * musb_trace.h - MUSB Controller Trace Support
  *
  * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
  *
  * Author: Bin Liu <b-liu@ti.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #undef TRACE_SYSTEM
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 0b4595439d51..5165d2b07ade 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -1,35 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MUSB OTG driver virtual root hub support
  *
  * Copyright 2005 Mentor Graphics Corporation
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 3620073da58c..21fb9e6622f3 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -1,34 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MUSB OTG driver - support for Mentor's DMA controller
  *
  * Copyright 2005 Mentor Graphics Corporation
  * Copyright (C) 2005-2007 by Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 #include <linux/device.h>
 #include <linux/interrupt.h>
diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h
index a3dcbd55e436..44f7983df0a1 100644
--- a/drivers/usb/musb/musbhsdma.h
+++ b/drivers/usb/musb/musbhsdma.h
@@ -1,34 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MUSB OTG driver - support for Mentor's DMA controller
  *
  * Copyright 2005 Mentor Graphics Corporation
  * Copyright (C) 2005-2007 by Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 
 #ifndef CONFIG_BLACKFIN
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 456f3e6ecf03..5d705930ef47 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2005-2007 by Texas Instruments
  * Some code has been taken from tusb6010.c
@@ -6,23 +7,6 @@
  * Tony Lindgren <tony@atomide.com>
  *
  * This file is part of the Inventra Controller Driver for Linux.
- *
- * The Inventra Controller Driver for Linux is free software; you
- * can redistribute it and/or modify it under the terms of the GNU
- * General Public License version 2 as published by the Free Software
- * Foundation.
- *
- * The Inventra Controller Driver for Linux is distributed in
- * the hope that it will be useful, but WITHOUT ANY WARRANTY;
- * without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
- * License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with The Inventra Controller Driver for Linux ; if not,
- * write to the Free Software Foundation, Inc., 59 Temple Place,
- * Suite 330, Boston, MA  02111-1307  USA
- *
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h
index 1b5e83a9840e..859008fa0e3c 100644
--- a/drivers/usb/musb/omap2430.h
+++ b/drivers/usb/musb/omap2430.h
@@ -1,10 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2005-2006 by Texas Instruments
- *
- * The Inventra Controller Driver for Linux is free software; you
- * can redistribute it and/or modify it under the terms of the GNU
- * General Public License version 2 as published by the Free Software
- * Foundation.
  */
 
 #ifndef __MUSB_OMAP243X_H__
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index dc353e24d53c..2d201219ecff 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Allwinner sun4i MUSB Glue Layer
  *
@@ -5,16 +6,6 @@
  *
  * Based on code from
  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/clk.h>
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 4eb640c54f2c..39453287b5c3 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * TUSB6010 USB 2.0 OTG Dual Role controller
  *
  * Copyright (C) 2006 Nokia Corporation
  * Tony Lindgren <tony@atomide.com>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  * Notes:
  * - Driver assumes that interface to external host (main CPU) is
  *   configured for NOR FLASH interface instead of VLYNQ serial
@@ -452,11 +449,9 @@ static int tusb_musb_vbus_status(struct musb *musb)
 	return ret;
 }
 
-static struct timer_list musb_idle_timer;
-
-static void musb_do_idle(unsigned long _musb)
+static void musb_do_idle(struct timer_list *t)
 {
-	struct musb	*musb = (void *)_musb;
+	struct musb	*musb = from_timer(musb, t, dev_timer);
 	unsigned long	flags;
 
 	spin_lock_irqsave(&musb->lock, flags);
@@ -523,13 +518,13 @@ static void tusb_musb_try_idle(struct musb *musb, unsigned long timeout)
 			&& (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON))) {
 		dev_dbg(musb->controller, "%s active, deleting timer\n",
 			usb_otg_state_string(musb->xceiv->otg->state));
-		del_timer(&musb_idle_timer);
+		del_timer(&musb->dev_timer);
 		last_timer = jiffies;
 		return;
 	}
 
 	if (time_after(last_timer, timeout)) {
-		if (!timer_pending(&musb_idle_timer))
+		if (!timer_pending(&musb->dev_timer))
 			last_timer = timeout;
 		else {
 			dev_dbg(musb->controller, "Longer idle timer already pending, ignoring\n");
@@ -541,7 +536,7 @@ static void tusb_musb_try_idle(struct musb *musb, unsigned long timeout)
 	dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n",
 		usb_otg_state_string(musb->xceiv->otg->state),
 		(unsigned long)jiffies_to_msecs(timeout - jiffies));
-	mod_timer(&musb_idle_timer, timeout);
+	mod_timer(&musb->dev_timer, timeout);
 }
 
 /* ticks of 60 MHz clock */
@@ -873,7 +868,7 @@ static irqreturn_t tusb_musb_interrupt(int irq, void *__hci)
 	}
 
 	if (int_src & TUSB_INT_SRC_USB_IP_CONN)
-		del_timer(&musb_idle_timer);
+		del_timer(&musb->dev_timer);
 
 	/* OTG state change reports (annoyingly) not issued by Mentor core */
 	if (int_src & (TUSB_INT_SRC_VBUS_SENSE_CHNG
@@ -982,7 +977,7 @@ static void tusb_musb_disable(struct musb *musb)
 	musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
 	musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
 
-	del_timer(&musb_idle_timer);
+	del_timer(&musb->dev_timer);
 
 	if (is_dma_capable() && !dma_off) {
 		printk(KERN_WARNING "%s %s: dma still active\n",
@@ -1142,7 +1137,7 @@ static int tusb_musb_init(struct musb *musb)
 	musb->xceiv->set_power = tusb_draw_power;
 	the_musb = musb;
 
-	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
+	timer_setup(&musb->dev_timer, musb_do_idle, 0);
 
 done:
 	if (ret < 0) {
@@ -1156,7 +1151,7 @@ done:
 
 static int tusb_musb_exit(struct musb *musb)
 {
-	del_timer_sync(&musb_idle_timer);
+	del_timer_sync(&musb->dev_timer);
 	the_musb = NULL;
 
 	if (musb->board_set_power)
diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h
index 72cdad23ced9..fd8025bbece7 100644
--- a/drivers/usb/musb/tusb6010.h
+++ b/drivers/usb/musb/tusb6010.h
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Definitions for TUSB6010 USB 2.0 OTG Dual Role controller
  *
  * Copyright (C) 2006 Nokia Corporation
  * Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef __TUSB6010_H__
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index e8060e49b0f4..60a93b8bbe3c 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * TUSB6010 USB 2.0 OTG Dual Role controller OMAP DMA interface
  *
  * Copyright (C) 2006 Nokia Corporation
  * Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index 5a572500c418..27b4a77a9e23 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -1,22 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2010 ST-Ericsson AB
  * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
  *
  * Based on omap2430.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index c92a295049ad..d19bb3e89da6 100644
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * drivers/usb/musb/ux500_dma.c
  *
@@ -9,19 +10,6 @@
  *	Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
  *	Praveena Nadahally <praveen.nadahally@stericsson.com>
  *	Rajaram Regupathy <ragupathy.rajaram@stericsson.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 #include <linux/device.h>
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index aff702c0eb9f..0f8ab981d572 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -137,35 +137,6 @@ config USB_ISP1301
 	  To compile this driver as a module, choose M here: the
 	  module will be called phy-isp1301.
 
-config USB_MSM_OTG
-	tristate "Qualcomm on-chip USB OTG controller support"
-	depends on (USB || USB_GADGET) && (ARCH_QCOM || COMPILE_TEST)
-	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
-	depends on RESET_CONTROLLER
-	select USB_PHY
-	help
-	  Enable this to support the USB OTG transceiver on Qualcomm chips. It
-	  handles PHY initialization, clock management, and workarounds
-	  required after resetting the hardware and power management.
-	  This driver is required even for peripheral only or host only
-	  mode configurations.
-	  This driver is not supported on boards like trout which
-	  has an external PHY.
-
-config USB_QCOM_8X16_PHY
-	tristate "Qualcomm APQ8016/MSM8916 on-chip USB PHY controller support"
-	depends on ARCH_QCOM || COMPILE_TEST
-	depends on RESET_CONTROLLER
-	select USB_PHY
-	select USB_ULPI_VIEWPORT
-	help
-	  Enable this to support the USB transceiver on Qualcomm 8x16 chipsets.
-	  It handles PHY initialization, clock management, power management,
-	  and workarounds required after resetting the hardware.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called phy-qcom-8x16-usb.
-
 config USB_MV_OTG
 	tristate "Marvell USB OTG support"
 	depends on USB_EHCI_MV && USB_MV_UDC && PM && USB_OTG
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 0c40ccc90631..25e579fb92b8 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -19,8 +19,6 @@ obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
 obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
 obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
 obj-$(CONFIG_USB_ISP1301)		+= phy-isp1301.o
-obj-$(CONFIG_USB_MSM_OTG)		+= phy-msm-usb.o
-obj-$(CONFIG_USB_QCOM_8X16_PHY)	+= phy-qcom-8x16-usb.o
 obj-$(CONFIG_USB_MV_OTG)		+= phy-mv-usb.o
 obj-$(CONFIG_USB_MXS_PHY)		+= phy-mxs-usb.o
 obj-$(CONFIG_USB_ULPI)			+= phy-ulpi.o
diff --git a/drivers/usb/phy/of.c b/drivers/usb/phy/of.c
index 66ffa82457a8..1ab134f45d67 100644
--- a/drivers/usb/phy/of.c
+++ b/drivers/usb/phy/of.c
@@ -1,10 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * USB of helper code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index 61bf2285d5b1..87295313a10c 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * USB transceiver driver for AB8500 family chips
  *
@@ -5,21 +6,6 @@
  * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
  * Avinash Kumar <avinash.kumar@stericsson.com>
  * Thirupathi Chippakurthy <thirupathi.chippakurthy@stericsson.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/phy/phy-am335x-control.c b/drivers/usb/phy/phy-am335x-control.c
index 5f5f19813fde..a3cb25cb74f8 100644
--- a/drivers/usb/phy/phy-am335x-control.c
+++ b/drivers/usb/phy/phy-am335x-control.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c
index 7e5aece769da..b36fa8b953d0 100644
--- a/drivers/usb/phy/phy-am335x.c
+++ b/drivers/usb/phy/phy-am335x.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index cf8f40ae6e01..900875f326d7 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2007,2008 Freescale semiconductor, Inc.
  *
@@ -5,20 +6,6 @@
  *         Jerry Huang <Chang-Ming.Huang@freescale.com>
  *
  * Initialization based on code from Shlomi Gridish.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/phy/phy-fsl-usb.h b/drivers/usb/phy/phy-fsl-usb.h
index 23149954a09c..43d410f6641b 100644
--- a/drivers/usb/phy/phy-fsl-usb.h
+++ b/drivers/usb/phy/phy-fsl-usb.h
@@ -1,19 +1,5 @@
-/* Copyright (C) 2007,2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2007,2008 Freescale Semiconductor, Inc. */
 
 #include <linux/usb/otg-fsm.h>
 #include <linux/usb/otg.h>
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index 89d6e7a5fdb7..74ba88297991 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * NOP USB transceiver for all USB transceiver which are either built-in
  * into USB IP or which are mostly autonomous.
@@ -5,20 +6,6 @@
  * Copyright (C) 2009 Texas Instruments Inc
  * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
  * Current status:
  *	This provides a "nop" transceiver for PHYs which are
  *	autonomous such as isp1504, isp1707, etc.
@@ -224,7 +211,7 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
 	int err = 0;
 
 	u32 clk_rate = 0;
-	bool needs_vcc = false;
+	bool needs_vcc = false, needs_clk = false;
 
 	if (dev->of_node) {
 		struct device_node *node = dev->of_node;
@@ -233,6 +220,7 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
 			clk_rate = 0;
 
 		needs_vcc = of_property_read_bool(node, "vcc-supply");
+		needs_clk = of_property_read_bool(node, "clocks");
 		nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
 							   GPIOD_ASIS);
 		err = PTR_ERR_OR_ZERO(nop->gpiod_reset);
@@ -275,6 +263,8 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
 	if (IS_ERR(nop->clk)) {
 		dev_dbg(dev, "Can't get phy clock: %ld\n",
 					PTR_ERR(nop->clk));
+		if (needs_clk)
+			return PTR_ERR(nop->clk);
 	}
 
 	if (!IS_ERR(nop->clk) && clk_rate) {
diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c
index f66120db8a41..553e2573c74f 100644
--- a/drivers/usb/phy/phy-gpio-vbus-usb.c
+++ b/drivers/usb/phy/phy-gpio-vbus-usb.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * gpio-vbus.c - simple GPIO VBUS sensing driver for B peripheral devices
  *
  * Copyright (c) 2008 Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index c6052c814bcc..7041ba030052 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -1,22 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * isp1301_omap - ISP 1301 USB transceiver, talking to OMAP OTG controller
  *
  * Copyright (C) 2004 Texas Instruments
  * Copyright (C) 2004 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/kernel.h>
@@ -1183,9 +1170,11 @@ static irqreturn_t isp1301_irq(int irq, void *isp)
 	return IRQ_HANDLED;
 }
 
-static void isp1301_timer(unsigned long _isp)
+static void isp1301_timer(struct timer_list *t)
 {
-	isp1301_defer_work((void *)_isp, WORK_TIMER);
+	struct isp1301 *isp = from_timer(isp, t, timer);
+
+	isp1301_defer_work(isp, WORK_TIMER);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1222,7 +1211,6 @@ static int isp1301_remove(struct i2c_client *i2c)
 	if (machine_is_omap_h2())
 		gpio_free(2);
 
-	isp->timer.data = 0;
 	set_bit(WORK_STOP, &isp->todo);
 	del_timer_sync(&isp->timer);
 	flush_work(&isp->work);
@@ -1507,9 +1495,7 @@ isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	}
 
 	INIT_WORK(&isp->work, isp1301_work);
-	init_timer(&isp->timer);
-	isp->timer.function = isp1301_timer;
-	isp->timer.data = (unsigned long) isp;
+	timer_setup(&isp->timer, isp1301_timer, 0);
 
 	i2c_set_clientdata(i2c, isp);
 	isp->client = i2c;
diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c
index f333024660b4..93b7d6a30aad 100644
--- a/drivers/usb/phy/phy-isp1301.c
+++ b/drivers/usb/phy/phy-isp1301.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * NXP ISP1301 USB transceiver driver
  *
  * Copyright (C) 2012 Roland Stigge
  *
  * Author: Roland Stigge <stigge@antcom.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/phy/phy-keystone.c b/drivers/usb/phy/phy-keystone.c
index 01d4e4cdbc79..19871266312d 100644
--- a/drivers/usb/phy/phy-keystone.c
+++ b/drivers/usb/phy/phy-keystone.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * phy-keystone - USB PHY, talking to dwc3 controller in Keystone.
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  *
  * Author: WingMan Kwok <w-kwok2@ti.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
deleted file mode 100644
index 3d0dd2f97415..000000000000
--- a/drivers/usb/phy/phy-msm-usb.c
+++ /dev/null
@@ -1,2085 +0,0 @@
-/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/extcon.h>
-#include <linux/gpio/consumer.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/uaccess.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/pm_runtime.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/reboot.h>
-#include <linux/reset.h>
-#include <linux/types.h>
-#include <linux/usb/otg.h>
-
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/of.h>
-#include <linux/usb/ulpi.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb/hcd.h>
-#include <linux/usb/msm_hsusb_hw.h>
-#include <linux/regulator/consumer.h>
-
-/**
- * OTG control
- *
- * OTG_NO_CONTROL	Id/VBUS notifications not required. Useful in host
- *                      only configuration.
- * OTG_PHY_CONTROL	Id/VBUS notifications comes form USB PHY.
- * OTG_PMIC_CONTROL	Id/VBUS notifications comes from PMIC hardware.
- * OTG_USER_CONTROL	Id/VBUS notifcations comes from User via sysfs.
- *
- */
-enum otg_control_type {
-	OTG_NO_CONTROL = 0,
-	OTG_PHY_CONTROL,
-	OTG_PMIC_CONTROL,
-	OTG_USER_CONTROL,
-};
-
-/**
- * PHY used in
- *
- * INVALID_PHY			Unsupported PHY
- * CI_45NM_INTEGRATED_PHY	Chipidea 45nm integrated PHY
- * SNPS_28NM_INTEGRATED_PHY	Synopsis 28nm integrated PHY
- *
- */
-enum msm_usb_phy_type {
-	INVALID_PHY = 0,
-	CI_45NM_INTEGRATED_PHY,
-	SNPS_28NM_INTEGRATED_PHY,
-};
-
-#define IDEV_CHG_MAX	1500
-#define IUNIT		100
-
-/**
- * Different states involved in USB charger detection.
- *
- * USB_CHG_STATE_UNDEFINED	USB charger is not connected or detection
- *                              process is not yet started.
- * USB_CHG_STATE_WAIT_FOR_DCD	Waiting for Data pins contact.
- * USB_CHG_STATE_DCD_DONE	Data pin contact is detected.
- * USB_CHG_STATE_PRIMARY_DONE	Primary detection is completed (Detects
- *                              between SDP and DCP/CDP).
- * USB_CHG_STATE_SECONDARY_DONE	Secondary detection is completed (Detects
- *                              between DCP and CDP).
- * USB_CHG_STATE_DETECTED	USB charger type is determined.
- *
- */
-enum usb_chg_state {
-	USB_CHG_STATE_UNDEFINED = 0,
-	USB_CHG_STATE_WAIT_FOR_DCD,
-	USB_CHG_STATE_DCD_DONE,
-	USB_CHG_STATE_PRIMARY_DONE,
-	USB_CHG_STATE_SECONDARY_DONE,
-	USB_CHG_STATE_DETECTED,
-};
-
-/**
- * USB charger types
- *
- * USB_INVALID_CHARGER	Invalid USB charger.
- * USB_SDP_CHARGER	Standard downstream port. Refers to a downstream port
- *                      on USB2.0 compliant host/hub.
- * USB_DCP_CHARGER	Dedicated charger port (AC charger/ Wall charger).
- * USB_CDP_CHARGER	Charging downstream port. Enumeration can happen and
- *                      IDEV_CHG_MAX can be drawn irrespective of USB state.
- *
- */
-enum usb_chg_type {
-	USB_INVALID_CHARGER = 0,
-	USB_SDP_CHARGER,
-	USB_DCP_CHARGER,
-	USB_CDP_CHARGER,
-};
-
-/**
- * struct msm_otg_platform_data - platform device data
- *              for msm_otg driver.
- * @phy_init_seq: PHY configuration sequence values. Value of -1 is reserved as
- *              "do not overwrite default vaule at this address".
- * @phy_init_sz: PHY configuration sequence size.
- * @vbus_power: VBUS power on/off routine.
- * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
- * @mode: Supported mode (OTG/peripheral/host).
- * @otg_control: OTG switch controlled by user/Id pin
- */
-struct msm_otg_platform_data {
-	int *phy_init_seq;
-	int phy_init_sz;
-	void (*vbus_power)(bool on);
-	unsigned power_budget;
-	enum usb_dr_mode mode;
-	enum otg_control_type otg_control;
-	enum msm_usb_phy_type phy_type;
-	void (*setup_gpio)(enum usb_otg_state state);
-};
-
-/**
- * struct msm_otg: OTG driver data. Shared by HCD and DCD.
- * @otg: USB OTG Transceiver structure.
- * @pdata: otg device platform data.
- * @irq: IRQ number assigned for HSUSB controller.
- * @clk: clock struct of usb_hs_clk.
- * @pclk: clock struct of usb_hs_pclk.
- * @core_clk: clock struct of usb_hs_core_clk.
- * @regs: ioremapped register base address.
- * @inputs: OTG state machine inputs(Id, SessValid etc).
- * @sm_work: OTG state machine work.
- * @in_lpm: indicates low power mode (LPM) state.
- * @async_int: Async interrupt arrived.
- * @cur_power: The amount of mA available from downstream port.
- * @chg_work: Charger detection work.
- * @chg_state: The state of charger detection process.
- * @chg_type: The type of charger attached.
- * @dcd_retires: The retry count used to track Data contact
- *               detection process.
- * @manual_pullup: true if VBUS is not routed to USB controller/phy
- *	and controller driver therefore enables pull-up explicitly before
- *	starting controller using usbcmd run/stop bit.
- * @vbus: VBUS signal state trakining, using extcon framework
- * @id: ID signal state trakining, using extcon framework
- * @switch_gpio: Descriptor for GPIO used to control external Dual
- *               SPDT USB Switch.
- * @reboot: Used to inform the driver to route USB D+/D- line to Device
- *	    connector
- */
-struct msm_otg {
-	struct usb_phy phy;
-	struct msm_otg_platform_data *pdata;
-	int irq;
-	struct clk *clk;
-	struct clk *pclk;
-	struct clk *core_clk;
-	void __iomem *regs;
-#define ID		0
-#define B_SESS_VLD	1
-	unsigned long inputs;
-	struct work_struct sm_work;
-	atomic_t in_lpm;
-	int async_int;
-	unsigned cur_power;
-	int phy_number;
-	struct delayed_work chg_work;
-	enum usb_chg_state chg_state;
-	enum usb_chg_type chg_type;
-	u8 dcd_retries;
-	struct regulator *v3p3;
-	struct regulator *v1p8;
-	struct regulator *vddcx;
-	struct regulator_bulk_data supplies[3];
-
-	struct reset_control *phy_rst;
-	struct reset_control *link_rst;
-	int vdd_levels[3];
-
-	bool manual_pullup;
-
-	struct gpio_desc *switch_gpio;
-	struct notifier_block reboot;
-};
-
-#define MSM_USB_BASE	(motg->regs)
-#define DRIVER_NAME	"msm_otg"
-
-#define ULPI_IO_TIMEOUT_USEC	(10 * 1000)
-#define LINK_RESET_TIMEOUT_USEC	(250 * 1000)
-
-#define USB_PHY_3P3_VOL_MIN	3050000 /* uV */
-#define USB_PHY_3P3_VOL_MAX	3300000 /* uV */
-#define USB_PHY_3P3_HPM_LOAD	50000	/* uA */
-#define USB_PHY_3P3_LPM_LOAD	4000	/* uA */
-
-#define USB_PHY_1P8_VOL_MIN	1800000 /* uV */
-#define USB_PHY_1P8_VOL_MAX	1800000 /* uV */
-#define USB_PHY_1P8_HPM_LOAD	50000	/* uA */
-#define USB_PHY_1P8_LPM_LOAD	4000	/* uA */
-
-#define USB_PHY_VDD_DIG_VOL_MIN	1000000 /* uV */
-#define USB_PHY_VDD_DIG_VOL_MAX	1320000 /* uV */
-#define USB_PHY_SUSP_DIG_VOL	500000  /* uV */
-
-enum vdd_levels {
-	VDD_LEVEL_NONE = 0,
-	VDD_LEVEL_MIN,
-	VDD_LEVEL_MAX,
-};
-
-static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init)
-{
-	int ret = 0;
-
-	if (init) {
-		ret = regulator_set_voltage(motg->vddcx,
-				motg->vdd_levels[VDD_LEVEL_MIN],
-				motg->vdd_levels[VDD_LEVEL_MAX]);
-		if (ret) {
-			dev_err(motg->phy.dev, "Cannot set vddcx voltage\n");
-			return ret;
-		}
-
-		ret = regulator_enable(motg->vddcx);
-		if (ret)
-			dev_err(motg->phy.dev, "unable to enable hsusb vddcx\n");
-	} else {
-		ret = regulator_set_voltage(motg->vddcx, 0,
-				motg->vdd_levels[VDD_LEVEL_MAX]);
-		if (ret)
-			dev_err(motg->phy.dev, "Cannot set vddcx voltage\n");
-		ret = regulator_disable(motg->vddcx);
-		if (ret)
-			dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n");
-	}
-
-	return ret;
-}
-
-static int msm_hsusb_ldo_init(struct msm_otg *motg, int init)
-{
-	int rc = 0;
-
-	if (init) {
-		rc = regulator_set_voltage(motg->v3p3, USB_PHY_3P3_VOL_MIN,
-				USB_PHY_3P3_VOL_MAX);
-		if (rc) {
-			dev_err(motg->phy.dev, "Cannot set v3p3 voltage\n");
-			goto exit;
-		}
-		rc = regulator_enable(motg->v3p3);
-		if (rc) {
-			dev_err(motg->phy.dev, "unable to enable the hsusb 3p3\n");
-			goto exit;
-		}
-		rc = regulator_set_voltage(motg->v1p8, USB_PHY_1P8_VOL_MIN,
-				USB_PHY_1P8_VOL_MAX);
-		if (rc) {
-			dev_err(motg->phy.dev, "Cannot set v1p8 voltage\n");
-			goto disable_3p3;
-		}
-		rc = regulator_enable(motg->v1p8);
-		if (rc) {
-			dev_err(motg->phy.dev, "unable to enable the hsusb 1p8\n");
-			goto disable_3p3;
-		}
-
-		return 0;
-	}
-
-	regulator_disable(motg->v1p8);
-disable_3p3:
-	regulator_disable(motg->v3p3);
-exit:
-	return rc;
-}
-
-static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on)
-{
-	int ret = 0;
-
-	if (on) {
-		ret = regulator_set_load(motg->v1p8, USB_PHY_1P8_HPM_LOAD);
-		if (ret < 0) {
-			pr_err("Could not set HPM for v1p8\n");
-			return ret;
-		}
-		ret = regulator_set_load(motg->v3p3, USB_PHY_3P3_HPM_LOAD);
-		if (ret < 0) {
-			pr_err("Could not set HPM for v3p3\n");
-			regulator_set_load(motg->v1p8, USB_PHY_1P8_LPM_LOAD);
-			return ret;
-		}
-	} else {
-		ret = regulator_set_load(motg->v1p8, USB_PHY_1P8_LPM_LOAD);
-		if (ret < 0)
-			pr_err("Could not set LPM for v1p8\n");
-		ret = regulator_set_load(motg->v3p3, USB_PHY_3P3_LPM_LOAD);
-		if (ret < 0)
-			pr_err("Could not set LPM for v3p3\n");
-	}
-
-	pr_debug("reg (%s)\n", on ? "HPM" : "LPM");
-	return ret < 0 ? ret : 0;
-}
-
-static int ulpi_read(struct usb_phy *phy, u32 reg)
-{
-	struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
-	int cnt = 0;
-
-	/* initiate read operation */
-	writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg),
-	       USB_ULPI_VIEWPORT);
-
-	/* wait for completion */
-	while (cnt < ULPI_IO_TIMEOUT_USEC) {
-		if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
-			break;
-		udelay(1);
-		cnt++;
-	}
-
-	if (cnt >= ULPI_IO_TIMEOUT_USEC) {
-		dev_err(phy->dev, "ulpi_read: timeout %08x\n",
-			readl(USB_ULPI_VIEWPORT));
-		return -ETIMEDOUT;
-	}
-	return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT));
-}
-
-static int ulpi_write(struct usb_phy *phy, u32 val, u32 reg)
-{
-	struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
-	int cnt = 0;
-
-	/* initiate write operation */
-	writel(ULPI_RUN | ULPI_WRITE |
-	       ULPI_ADDR(reg) | ULPI_DATA(val),
-	       USB_ULPI_VIEWPORT);
-
-	/* wait for completion */
-	while (cnt < ULPI_IO_TIMEOUT_USEC) {
-		if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
-			break;
-		udelay(1);
-		cnt++;
-	}
-
-	if (cnt >= ULPI_IO_TIMEOUT_USEC) {
-		dev_err(phy->dev, "ulpi_write: timeout\n");
-		return -ETIMEDOUT;
-	}
-	return 0;
-}
-
-static struct usb_phy_io_ops msm_otg_io_ops = {
-	.read = ulpi_read,
-	.write = ulpi_write,
-};
-
-static void ulpi_init(struct msm_otg *motg)
-{
-	struct msm_otg_platform_data *pdata = motg->pdata;
-	int *seq = pdata->phy_init_seq, idx;
-	u32 addr = ULPI_EXT_VENDOR_SPECIFIC;
-
-	for (idx = 0; idx < pdata->phy_init_sz; idx++) {
-		if (seq[idx] == -1)
-			continue;
-
-		dev_vdbg(motg->phy.dev, "ulpi: write 0x%02x to 0x%02x\n",
-				seq[idx], addr + idx);
-		ulpi_write(&motg->phy, seq[idx], addr + idx);
-	}
-}
-
-static int msm_phy_notify_disconnect(struct usb_phy *phy,
-				   enum usb_device_speed speed)
-{
-	struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
-	int val;
-
-	if (motg->manual_pullup) {
-		val = ULPI_MISC_A_VBUSVLDEXT | ULPI_MISC_A_VBUSVLDEXTSEL;
-		usb_phy_io_write(phy, val, ULPI_CLR(ULPI_MISC_A));
-	}
-
-	/*
-	 * Put the transceiver in non-driving mode. Otherwise host
-	 * may not detect soft-disconnection.
-	 */
-	val = ulpi_read(phy, ULPI_FUNC_CTRL);
-	val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
-	val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
-	ulpi_write(phy, val, ULPI_FUNC_CTRL);
-
-	return 0;
-}
-
-static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
-{
-	int ret;
-
-	if (assert)
-		ret = reset_control_assert(motg->link_rst);
-	else
-		ret = reset_control_deassert(motg->link_rst);
-
-	if (ret)
-		dev_err(motg->phy.dev, "usb link clk reset %s failed\n",
-			assert ? "assert" : "deassert");
-
-	return ret;
-}
-
-static int msm_otg_phy_clk_reset(struct msm_otg *motg)
-{
-	int ret = 0;
-
-	if (motg->phy_rst)
-		ret = reset_control_reset(motg->phy_rst);
-
-	if (ret)
-		dev_err(motg->phy.dev, "usb phy clk reset failed\n");
-
-	return ret;
-}
-
-static int msm_link_reset(struct msm_otg *motg)
-{
-	u32 val;
-	int ret;
-
-	ret = msm_otg_link_clk_reset(motg, 1);
-	if (ret)
-		return ret;
-
-	/* wait for 1ms delay as suggested in HPG. */
-	usleep_range(1000, 1200);
-
-	ret = msm_otg_link_clk_reset(motg, 0);
-	if (ret)
-		return ret;
-
-	if (motg->phy_number)
-		writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
-
-	/* put transceiver in serial mode as part of reset */
-	val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK;
-	writel(val | PORTSC_PTS_SERIAL, USB_PORTSC);
-
-	return 0;
-}
-
-static int msm_otg_reset(struct usb_phy *phy)
-{
-	struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
-	int cnt = 0;
-
-	writel(USBCMD_RESET, USB_USBCMD);
-	while (cnt < LINK_RESET_TIMEOUT_USEC) {
-		if (!(readl(USB_USBCMD) & USBCMD_RESET))
-			break;
-		udelay(1);
-		cnt++;
-	}
-	if (cnt >= LINK_RESET_TIMEOUT_USEC)
-		return -ETIMEDOUT;
-
-	/* select ULPI phy and clear other status/control bits in PORTSC */
-	writel(PORTSC_PTS_ULPI, USB_PORTSC);
-
-	writel(0x0, USB_AHBBURST);
-	writel(0x08, USB_AHBMODE);
-
-	if (motg->phy_number)
-		writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
-	return 0;
-}
-
-static void msm_phy_reset(struct msm_otg *motg)
-{
-	void __iomem *addr;
-
-	if (motg->pdata->phy_type != SNPS_28NM_INTEGRATED_PHY) {
-		msm_otg_phy_clk_reset(motg);
-		return;
-	}
-
-	addr = USB_PHY_CTRL;
-	if (motg->phy_number)
-		addr = USB_PHY_CTRL2;
-
-	/* Assert USB PHY_POR */
-	writel(readl(addr) | PHY_POR_ASSERT, addr);
-
-	/*
-	 * wait for minimum 10 microseconds as suggested in HPG.
-	 * Use a slightly larger value since the exact value didn't
-	 * work 100% of the time.
-	 */
-	udelay(12);
-
-	/* Deassert USB PHY_POR */
-	writel(readl(addr) & ~PHY_POR_ASSERT, addr);
-}
-
-static int msm_usb_reset(struct usb_phy *phy)
-{
-	struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
-	int ret;
-
-	if (!IS_ERR(motg->core_clk))
-		clk_prepare_enable(motg->core_clk);
-
-	ret = msm_link_reset(motg);
-	if (ret) {
-		dev_err(phy->dev, "phy_reset failed\n");
-		return ret;
-	}
-
-	ret = msm_otg_reset(&motg->phy);
-	if (ret) {
-		dev_err(phy->dev, "link reset failed\n");
-		return ret;
-	}
-
-	msleep(100);
-
-	/* Reset USB PHY after performing USB Link RESET */
-	msm_phy_reset(motg);
-
-	if (!IS_ERR(motg->core_clk))
-		clk_disable_unprepare(motg->core_clk);
-
-	return 0;
-}
-
-static int msm_phy_init(struct usb_phy *phy)
-{
-	struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
-	struct msm_otg_platform_data *pdata = motg->pdata;
-	u32 val, ulpi_val = 0;
-
-	/* Program USB PHY Override registers. */
-	ulpi_init(motg);
-
-	/*
-	 * It is recommended in HPG to reset USB PHY after programming
-	 * USB PHY Override registers.
-	 */
-	msm_phy_reset(motg);
-
-	if (pdata->otg_control == OTG_PHY_CONTROL) {
-		val = readl(USB_OTGSC);
-		if (pdata->mode == USB_DR_MODE_OTG) {
-			ulpi_val = ULPI_INT_IDGRD | ULPI_INT_SESS_VALID;
-			val |= OTGSC_IDIE | OTGSC_BSVIE;
-		} else if (pdata->mode == USB_DR_MODE_PERIPHERAL) {
-			ulpi_val = ULPI_INT_SESS_VALID;
-			val |= OTGSC_BSVIE;
-		}
-		writel(val, USB_OTGSC);
-		ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_RISE);
-		ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL);
-	}
-
-	if (motg->manual_pullup) {
-		val = ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT;
-		ulpi_write(phy, val, ULPI_SET(ULPI_MISC_A));
-
-		val = readl(USB_GENCONFIG_2);
-		val |= GENCONFIG_2_SESS_VLD_CTRL_EN;
-		writel(val, USB_GENCONFIG_2);
-
-		val = readl(USB_USBCMD);
-		val |= USBCMD_SESS_VLD_CTRL;
-		writel(val, USB_USBCMD);
-
-		val = ulpi_read(phy, ULPI_FUNC_CTRL);
-		val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
-		val |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
-		ulpi_write(phy, val, ULPI_FUNC_CTRL);
-	}
-
-	if (motg->phy_number)
-		writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
-
-	return 0;
-}
-
-#define PHY_SUSPEND_TIMEOUT_USEC	(500 * 1000)
-#define PHY_RESUME_TIMEOUT_USEC	(100 * 1000)
-
-#ifdef CONFIG_PM
-
-static int msm_hsusb_config_vddcx(struct msm_otg *motg, int high)
-{
-	int max_vol = motg->vdd_levels[VDD_LEVEL_MAX];
-	int min_vol;
-	int ret;
-
-	if (high)
-		min_vol = motg->vdd_levels[VDD_LEVEL_MIN];
-	else
-		min_vol = motg->vdd_levels[VDD_LEVEL_NONE];
-
-	ret = regulator_set_voltage(motg->vddcx, min_vol, max_vol);
-	if (ret) {
-		pr_err("Cannot set vddcx voltage\n");
-		return ret;
-	}
-
-	pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol);
-
-	return ret;
-}
-
-static int msm_otg_suspend(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	struct usb_bus *bus = phy->otg->host;
-	struct msm_otg_platform_data *pdata = motg->pdata;
-	void __iomem *addr;
-	int cnt = 0;
-
-	if (atomic_read(&motg->in_lpm))
-		return 0;
-
-	disable_irq(motg->irq);
-	/*
-	 * Chipidea 45-nm PHY suspend sequence:
-	 *
-	 * Interrupt Latch Register auto-clear feature is not present
-	 * in all PHY versions. Latch register is clear on read type.
-	 * Clear latch register to avoid spurious wakeup from
-	 * low power mode (LPM).
-	 *
-	 * PHY comparators are disabled when PHY enters into low power
-	 * mode (LPM). Keep PHY comparators ON in LPM only when we expect
-	 * VBUS/Id notifications from USB PHY. Otherwise turn off USB
-	 * PHY comparators. This save significant amount of power.
-	 *
-	 * PLL is not turned off when PHY enters into low power mode (LPM).
-	 * Disable PLL for maximum power savings.
-	 */
-
-	if (motg->pdata->phy_type == CI_45NM_INTEGRATED_PHY) {
-		ulpi_read(phy, 0x14);
-		if (pdata->otg_control == OTG_PHY_CONTROL)
-			ulpi_write(phy, 0x01, 0x30);
-		ulpi_write(phy, 0x08, 0x09);
-	}
-
-	/*
-	 * PHY may take some time or even fail to enter into low power
-	 * mode (LPM). Hence poll for 500 msec and reset the PHY and link
-	 * in failure case.
-	 */
-	writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
-	while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
-		if (readl(USB_PORTSC) & PORTSC_PHCD)
-			break;
-		udelay(1);
-		cnt++;
-	}
-
-	if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) {
-		dev_err(phy->dev, "Unable to suspend PHY\n");
-		msm_otg_reset(phy);
-		enable_irq(motg->irq);
-		return -ETIMEDOUT;
-	}
-
-	/*
-	 * PHY has capability to generate interrupt asynchronously in low
-	 * power mode (LPM). This interrupt is level triggered. So USB IRQ
-	 * line must be disabled till async interrupt enable bit is cleared
-	 * in USBCMD register. Assert STP (ULPI interface STOP signal) to
-	 * block data communication from PHY.
-	 */
-	writel(readl(USB_USBCMD) | ASYNC_INTR_CTRL | ULPI_STP_CTRL, USB_USBCMD);
-
-	addr = USB_PHY_CTRL;
-	if (motg->phy_number)
-		addr = USB_PHY_CTRL2;
-
-	if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
-			motg->pdata->otg_control == OTG_PMIC_CONTROL)
-		writel(readl(addr) | PHY_RETEN, addr);
-
-	clk_disable_unprepare(motg->pclk);
-	clk_disable_unprepare(motg->clk);
-	if (!IS_ERR(motg->core_clk))
-		clk_disable_unprepare(motg->core_clk);
-
-	if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
-			motg->pdata->otg_control == OTG_PMIC_CONTROL) {
-		msm_hsusb_ldo_set_mode(motg, 0);
-		msm_hsusb_config_vddcx(motg, 0);
-	}
-
-	if (device_may_wakeup(phy->dev))
-		enable_irq_wake(motg->irq);
-	if (bus)
-		clear_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
-
-	atomic_set(&motg->in_lpm, 1);
-	enable_irq(motg->irq);
-
-	dev_info(phy->dev, "USB in low power mode\n");
-
-	return 0;
-}
-
-static int msm_otg_resume(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	struct usb_bus *bus = phy->otg->host;
-	void __iomem *addr;
-	int cnt = 0;
-	unsigned temp;
-
-	if (!atomic_read(&motg->in_lpm))
-		return 0;
-
-	clk_prepare_enable(motg->pclk);
-	clk_prepare_enable(motg->clk);
-	if (!IS_ERR(motg->core_clk))
-		clk_prepare_enable(motg->core_clk);
-
-	if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
-			motg->pdata->otg_control == OTG_PMIC_CONTROL) {
-
-		addr = USB_PHY_CTRL;
-		if (motg->phy_number)
-			addr = USB_PHY_CTRL2;
-
-		msm_hsusb_ldo_set_mode(motg, 1);
-		msm_hsusb_config_vddcx(motg, 1);
-		writel(readl(addr) & ~PHY_RETEN, addr);
-	}
-
-	temp = readl(USB_USBCMD);
-	temp &= ~ASYNC_INTR_CTRL;
-	temp &= ~ULPI_STP_CTRL;
-	writel(temp, USB_USBCMD);
-
-	/*
-	 * PHY comes out of low power mode (LPM) in case of wakeup
-	 * from asynchronous interrupt.
-	 */
-	if (!(readl(USB_PORTSC) & PORTSC_PHCD))
-		goto skip_phy_resume;
-
-	writel(readl(USB_PORTSC) & ~PORTSC_PHCD, USB_PORTSC);
-	while (cnt < PHY_RESUME_TIMEOUT_USEC) {
-		if (!(readl(USB_PORTSC) & PORTSC_PHCD))
-			break;
-		udelay(1);
-		cnt++;
-	}
-
-	if (cnt >= PHY_RESUME_TIMEOUT_USEC) {
-		/*
-		 * This is a fatal error. Reset the link and
-		 * PHY. USB state can not be restored. Re-insertion
-		 * of USB cable is the only way to get USB working.
-		 */
-		dev_err(phy->dev, "Unable to resume USB. Re-plugin the cable\n");
-		msm_otg_reset(phy);
-	}
-
-skip_phy_resume:
-	if (device_may_wakeup(phy->dev))
-		disable_irq_wake(motg->irq);
-	if (bus)
-		set_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
-
-	atomic_set(&motg->in_lpm, 0);
-
-	if (motg->async_int) {
-		motg->async_int = 0;
-		pm_runtime_put(phy->dev);
-		enable_irq(motg->irq);
-	}
-
-	dev_info(phy->dev, "USB exited from low power mode\n");
-
-	return 0;
-}
-#endif
-
-static void msm_otg_notify_charger(struct msm_otg *motg, unsigned mA)
-{
-	if (motg->cur_power == mA)
-		return;
-
-	/* TODO: Notify PMIC about available current */
-	dev_info(motg->phy.dev, "Avail curr from USB = %u\n", mA);
-	motg->cur_power = mA;
-}
-
-static void msm_otg_start_host(struct usb_phy *phy, int on)
-{
-	struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
-	struct msm_otg_platform_data *pdata = motg->pdata;
-	struct usb_hcd *hcd;
-
-	if (!phy->otg->host)
-		return;
-
-	hcd = bus_to_hcd(phy->otg->host);
-
-	if (on) {
-		dev_dbg(phy->dev, "host on\n");
-
-		if (pdata->vbus_power)
-			pdata->vbus_power(1);
-		/*
-		 * Some boards have a switch cotrolled by gpio
-		 * to enable/disable internal HUB. Enable internal
-		 * HUB before kicking the host.
-		 */
-		if (pdata->setup_gpio)
-			pdata->setup_gpio(OTG_STATE_A_HOST);
-#ifdef CONFIG_USB
-		usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
-		device_wakeup_enable(hcd->self.controller);
-#endif
-	} else {
-		dev_dbg(phy->dev, "host off\n");
-
-#ifdef CONFIG_USB
-		usb_remove_hcd(hcd);
-#endif
-		if (pdata->setup_gpio)
-			pdata->setup_gpio(OTG_STATE_UNDEFINED);
-		if (pdata->vbus_power)
-			pdata->vbus_power(0);
-	}
-}
-
-static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
-{
-	struct msm_otg *motg = container_of(otg->usb_phy, struct msm_otg, phy);
-	struct usb_hcd *hcd;
-
-	/*
-	 * Fail host registration if this board can support
-	 * only peripheral configuration.
-	 */
-	if (motg->pdata->mode == USB_DR_MODE_PERIPHERAL) {
-		dev_info(otg->usb_phy->dev, "Host mode is not supported\n");
-		return -ENODEV;
-	}
-
-	if (!host) {
-		if (otg->state == OTG_STATE_A_HOST) {
-			pm_runtime_get_sync(otg->usb_phy->dev);
-			msm_otg_start_host(otg->usb_phy, 0);
-			otg->host = NULL;
-			otg->state = OTG_STATE_UNDEFINED;
-			schedule_work(&motg->sm_work);
-		} else {
-			otg->host = NULL;
-		}
-
-		return 0;
-	}
-
-	hcd = bus_to_hcd(host);
-	hcd->power_budget = motg->pdata->power_budget;
-
-	otg->host = host;
-	dev_dbg(otg->usb_phy->dev, "host driver registered w/ tranceiver\n");
-
-	pm_runtime_get_sync(otg->usb_phy->dev);
-	schedule_work(&motg->sm_work);
-
-	return 0;
-}
-
-static void msm_otg_start_peripheral(struct usb_phy *phy, int on)
-{
-	struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
-	struct msm_otg_platform_data *pdata = motg->pdata;
-
-	if (!phy->otg->gadget)
-		return;
-
-	if (on) {
-		dev_dbg(phy->dev, "gadget on\n");
-		/*
-		 * Some boards have a switch cotrolled by gpio
-		 * to enable/disable internal HUB. Disable internal
-		 * HUB before kicking the gadget.
-		 */
-		if (pdata->setup_gpio)
-			pdata->setup_gpio(OTG_STATE_B_PERIPHERAL);
-		usb_gadget_vbus_connect(phy->otg->gadget);
-	} else {
-		dev_dbg(phy->dev, "gadget off\n");
-		usb_gadget_vbus_disconnect(phy->otg->gadget);
-		if (pdata->setup_gpio)
-			pdata->setup_gpio(OTG_STATE_UNDEFINED);
-	}
-
-}
-
-static int msm_otg_set_peripheral(struct usb_otg *otg,
-					struct usb_gadget *gadget)
-{
-	struct msm_otg *motg = container_of(otg->usb_phy, struct msm_otg, phy);
-
-	/*
-	 * Fail peripheral registration if this board can support
-	 * only host configuration.
-	 */
-	if (motg->pdata->mode == USB_DR_MODE_HOST) {
-		dev_info(otg->usb_phy->dev, "Peripheral mode is not supported\n");
-		return -ENODEV;
-	}
-
-	if (!gadget) {
-		if (otg->state == OTG_STATE_B_PERIPHERAL) {
-			pm_runtime_get_sync(otg->usb_phy->dev);
-			msm_otg_start_peripheral(otg->usb_phy, 0);
-			otg->gadget = NULL;
-			otg->state = OTG_STATE_UNDEFINED;
-			schedule_work(&motg->sm_work);
-		} else {
-			otg->gadget = NULL;
-		}
-
-		return 0;
-	}
-	otg->gadget = gadget;
-	dev_dbg(otg->usb_phy->dev,
-		"peripheral driver registered w/ tranceiver\n");
-
-	pm_runtime_get_sync(otg->usb_phy->dev);
-	schedule_work(&motg->sm_work);
-
-	return 0;
-}
-
-static bool msm_chg_check_secondary_det(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	u32 chg_det;
-	bool ret = false;
-
-	switch (motg->pdata->phy_type) {
-	case CI_45NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x34);
-		ret = chg_det & (1 << 4);
-		break;
-	case SNPS_28NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x87);
-		ret = chg_det & 1;
-		break;
-	default:
-		break;
-	}
-	return ret;
-}
-
-static void msm_chg_enable_secondary_det(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	u32 chg_det;
-
-	switch (motg->pdata->phy_type) {
-	case CI_45NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x34);
-		/* Turn off charger block */
-		chg_det |= ~(1 << 1);
-		ulpi_write(phy, chg_det, 0x34);
-		udelay(20);
-		/* control chg block via ULPI */
-		chg_det &= ~(1 << 3);
-		ulpi_write(phy, chg_det, 0x34);
-		/* put it in host mode for enabling D- source */
-		chg_det &= ~(1 << 2);
-		ulpi_write(phy, chg_det, 0x34);
-		/* Turn on chg detect block */
-		chg_det &= ~(1 << 1);
-		ulpi_write(phy, chg_det, 0x34);
-		udelay(20);
-		/* enable chg detection */
-		chg_det &= ~(1 << 0);
-		ulpi_write(phy, chg_det, 0x34);
-		break;
-	case SNPS_28NM_INTEGRATED_PHY:
-		/*
-		 * Configure DM as current source, DP as current sink
-		 * and enable battery charging comparators.
-		 */
-		ulpi_write(phy, 0x8, 0x85);
-		ulpi_write(phy, 0x2, 0x85);
-		ulpi_write(phy, 0x1, 0x85);
-		break;
-	default:
-		break;
-	}
-}
-
-static bool msm_chg_check_primary_det(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	u32 chg_det;
-	bool ret = false;
-
-	switch (motg->pdata->phy_type) {
-	case CI_45NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x34);
-		ret = chg_det & (1 << 4);
-		break;
-	case SNPS_28NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x87);
-		ret = chg_det & 1;
-		break;
-	default:
-		break;
-	}
-	return ret;
-}
-
-static void msm_chg_enable_primary_det(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	u32 chg_det;
-
-	switch (motg->pdata->phy_type) {
-	case CI_45NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x34);
-		/* enable chg detection */
-		chg_det &= ~(1 << 0);
-		ulpi_write(phy, chg_det, 0x34);
-		break;
-	case SNPS_28NM_INTEGRATED_PHY:
-		/*
-		 * Configure DP as current source, DM as current sink
-		 * and enable battery charging comparators.
-		 */
-		ulpi_write(phy, 0x2, 0x85);
-		ulpi_write(phy, 0x1, 0x85);
-		break;
-	default:
-		break;
-	}
-}
-
-static bool msm_chg_check_dcd(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	u32 line_state;
-	bool ret = false;
-
-	switch (motg->pdata->phy_type) {
-	case CI_45NM_INTEGRATED_PHY:
-		line_state = ulpi_read(phy, 0x15);
-		ret = !(line_state & 1);
-		break;
-	case SNPS_28NM_INTEGRATED_PHY:
-		line_state = ulpi_read(phy, 0x87);
-		ret = line_state & 2;
-		break;
-	default:
-		break;
-	}
-	return ret;
-}
-
-static void msm_chg_disable_dcd(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	u32 chg_det;
-
-	switch (motg->pdata->phy_type) {
-	case CI_45NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x34);
-		chg_det &= ~(1 << 5);
-		ulpi_write(phy, chg_det, 0x34);
-		break;
-	case SNPS_28NM_INTEGRATED_PHY:
-		ulpi_write(phy, 0x10, 0x86);
-		break;
-	default:
-		break;
-	}
-}
-
-static void msm_chg_enable_dcd(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	u32 chg_det;
-
-	switch (motg->pdata->phy_type) {
-	case CI_45NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x34);
-		/* Turn on D+ current source */
-		chg_det |= (1 << 5);
-		ulpi_write(phy, chg_det, 0x34);
-		break;
-	case SNPS_28NM_INTEGRATED_PHY:
-		/* Data contact detection enable */
-		ulpi_write(phy, 0x10, 0x85);
-		break;
-	default:
-		break;
-	}
-}
-
-static void msm_chg_block_on(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	u32 func_ctrl, chg_det;
-
-	/* put the controller in non-driving mode */
-	func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL);
-	func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
-	func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
-	ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL);
-
-	switch (motg->pdata->phy_type) {
-	case CI_45NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x34);
-		/* control chg block via ULPI */
-		chg_det &= ~(1 << 3);
-		ulpi_write(phy, chg_det, 0x34);
-		/* Turn on chg detect block */
-		chg_det &= ~(1 << 1);
-		ulpi_write(phy, chg_det, 0x34);
-		udelay(20);
-		break;
-	case SNPS_28NM_INTEGRATED_PHY:
-		/* Clear charger detecting control bits */
-		ulpi_write(phy, 0x3F, 0x86);
-		/* Clear alt interrupt latch and enable bits */
-		ulpi_write(phy, 0x1F, 0x92);
-		ulpi_write(phy, 0x1F, 0x95);
-		udelay(100);
-		break;
-	default:
-		break;
-	}
-}
-
-static void msm_chg_block_off(struct msm_otg *motg)
-{
-	struct usb_phy *phy = &motg->phy;
-	u32 func_ctrl, chg_det;
-
-	switch (motg->pdata->phy_type) {
-	case CI_45NM_INTEGRATED_PHY:
-		chg_det = ulpi_read(phy, 0x34);
-		/* Turn off charger block */
-		chg_det |= ~(1 << 1);
-		ulpi_write(phy, chg_det, 0x34);
-		break;
-	case SNPS_28NM_INTEGRATED_PHY:
-		/* Clear charger detecting control bits */
-		ulpi_write(phy, 0x3F, 0x86);
-		/* Clear alt interrupt latch and enable bits */
-		ulpi_write(phy, 0x1F, 0x92);
-		ulpi_write(phy, 0x1F, 0x95);
-		break;
-	default:
-		break;
-	}
-
-	/* put the controller in normal mode */
-	func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL);
-	func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
-	func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
-	ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL);
-}
-
-#define MSM_CHG_DCD_POLL_TIME		(100 * HZ/1000) /* 100 msec */
-#define MSM_CHG_DCD_MAX_RETRIES		6 /* Tdcd_tmout = 6 * 100 msec */
-#define MSM_CHG_PRIMARY_DET_TIME	(40 * HZ/1000) /* TVDPSRC_ON */
-#define MSM_CHG_SECONDARY_DET_TIME	(40 * HZ/1000) /* TVDMSRC_ON */
-static void msm_chg_detect_work(struct work_struct *w)
-{
-	struct msm_otg *motg = container_of(w, struct msm_otg, chg_work.work);
-	struct usb_phy *phy = &motg->phy;
-	bool is_dcd, tmout, vout;
-	unsigned long delay;
-
-	dev_dbg(phy->dev, "chg detection work\n");
-	switch (motg->chg_state) {
-	case USB_CHG_STATE_UNDEFINED:
-		pm_runtime_get_sync(phy->dev);
-		msm_chg_block_on(motg);
-		msm_chg_enable_dcd(motg);
-		motg->chg_state = USB_CHG_STATE_WAIT_FOR_DCD;
-		motg->dcd_retries = 0;
-		delay = MSM_CHG_DCD_POLL_TIME;
-		break;
-	case USB_CHG_STATE_WAIT_FOR_DCD:
-		is_dcd = msm_chg_check_dcd(motg);
-		tmout = ++motg->dcd_retries == MSM_CHG_DCD_MAX_RETRIES;
-		if (is_dcd || tmout) {
-			msm_chg_disable_dcd(motg);
-			msm_chg_enable_primary_det(motg);
-			delay = MSM_CHG_PRIMARY_DET_TIME;
-			motg->chg_state = USB_CHG_STATE_DCD_DONE;
-		} else {
-			delay = MSM_CHG_DCD_POLL_TIME;
-		}
-		break;
-	case USB_CHG_STATE_DCD_DONE:
-		vout = msm_chg_check_primary_det(motg);
-		if (vout) {
-			msm_chg_enable_secondary_det(motg);
-			delay = MSM_CHG_SECONDARY_DET_TIME;
-			motg->chg_state = USB_CHG_STATE_PRIMARY_DONE;
-		} else {
-			motg->chg_type = USB_SDP_CHARGER;
-			motg->chg_state = USB_CHG_STATE_DETECTED;
-			delay = 0;
-		}
-		break;
-	case USB_CHG_STATE_PRIMARY_DONE:
-		vout = msm_chg_check_secondary_det(motg);
-		if (vout)
-			motg->chg_type = USB_DCP_CHARGER;
-		else
-			motg->chg_type = USB_CDP_CHARGER;
-		motg->chg_state = USB_CHG_STATE_SECONDARY_DONE;
-		/* fall through */
-	case USB_CHG_STATE_SECONDARY_DONE:
-		motg->chg_state = USB_CHG_STATE_DETECTED;
-	case USB_CHG_STATE_DETECTED:
-		msm_chg_block_off(motg);
-		dev_dbg(phy->dev, "charger = %d\n", motg->chg_type);
-		schedule_work(&motg->sm_work);
-		return;
-	default:
-		return;
-	}
-
-	schedule_delayed_work(&motg->chg_work, delay);
-}
-
-/*
- * We support OTG, Peripheral only and Host only configurations. In case
- * of OTG, mode switch (host-->peripheral/peripheral-->host) can happen
- * via Id pin status or user request (debugfs). Id/BSV interrupts are not
- * enabled when switch is controlled by user and default mode is supplied
- * by board file, which can be changed by userspace later.
- */
-static void msm_otg_init_sm(struct msm_otg *motg)
-{
-	struct msm_otg_platform_data *pdata = motg->pdata;
-	u32 otgsc = readl(USB_OTGSC);
-
-	switch (pdata->mode) {
-	case USB_DR_MODE_OTG:
-		if (pdata->otg_control == OTG_PHY_CONTROL) {
-			if (otgsc & OTGSC_ID)
-				set_bit(ID, &motg->inputs);
-			else
-				clear_bit(ID, &motg->inputs);
-
-			if (otgsc & OTGSC_BSV)
-				set_bit(B_SESS_VLD, &motg->inputs);
-			else
-				clear_bit(B_SESS_VLD, &motg->inputs);
-		} else if (pdata->otg_control == OTG_USER_CONTROL) {
-				set_bit(ID, &motg->inputs);
-				clear_bit(B_SESS_VLD, &motg->inputs);
-		}
-		break;
-	case USB_DR_MODE_HOST:
-		clear_bit(ID, &motg->inputs);
-		break;
-	case USB_DR_MODE_PERIPHERAL:
-		set_bit(ID, &motg->inputs);
-		if (otgsc & OTGSC_BSV)
-			set_bit(B_SESS_VLD, &motg->inputs);
-		else
-			clear_bit(B_SESS_VLD, &motg->inputs);
-		break;
-	default:
-		break;
-	}
-}
-
-static void msm_otg_sm_work(struct work_struct *w)
-{
-	struct msm_otg *motg = container_of(w, struct msm_otg, sm_work);
-	struct usb_otg *otg = motg->phy.otg;
-
-	switch (otg->state) {
-	case OTG_STATE_UNDEFINED:
-		dev_dbg(otg->usb_phy->dev, "OTG_STATE_UNDEFINED state\n");
-		msm_otg_reset(otg->usb_phy);
-		msm_otg_init_sm(motg);
-		otg->state = OTG_STATE_B_IDLE;
-		/* FALL THROUGH */
-	case OTG_STATE_B_IDLE:
-		dev_dbg(otg->usb_phy->dev, "OTG_STATE_B_IDLE state\n");
-		if (!test_bit(ID, &motg->inputs) && otg->host) {
-			/* disable BSV bit */
-			writel(readl(USB_OTGSC) & ~OTGSC_BSVIE, USB_OTGSC);
-			msm_otg_start_host(otg->usb_phy, 1);
-			otg->state = OTG_STATE_A_HOST;
-		} else if (test_bit(B_SESS_VLD, &motg->inputs)) {
-			switch (motg->chg_state) {
-			case USB_CHG_STATE_UNDEFINED:
-				msm_chg_detect_work(&motg->chg_work.work);
-				break;
-			case USB_CHG_STATE_DETECTED:
-				switch (motg->chg_type) {
-				case USB_DCP_CHARGER:
-					msm_otg_notify_charger(motg,
-							IDEV_CHG_MAX);
-					break;
-				case USB_CDP_CHARGER:
-					msm_otg_notify_charger(motg,
-							IDEV_CHG_MAX);
-					msm_otg_start_peripheral(otg->usb_phy,
-								 1);
-					otg->state
-						= OTG_STATE_B_PERIPHERAL;
-					break;
-				case USB_SDP_CHARGER:
-					msm_otg_notify_charger(motg, IUNIT);
-					msm_otg_start_peripheral(otg->usb_phy,
-								 1);
-					otg->state
-						= OTG_STATE_B_PERIPHERAL;
-					break;
-				default:
-					break;
-				}
-				break;
-			default:
-				break;
-			}
-		} else {
-			/*
-			 * If charger detection work is pending, decrement
-			 * the pm usage counter to balance with the one that
-			 * is incremented in charger detection work.
-			 */
-			if (cancel_delayed_work_sync(&motg->chg_work)) {
-				pm_runtime_put_sync(otg->usb_phy->dev);
-				msm_otg_reset(otg->usb_phy);
-			}
-			msm_otg_notify_charger(motg, 0);
-			motg->chg_state = USB_CHG_STATE_UNDEFINED;
-			motg->chg_type = USB_INVALID_CHARGER;
-		}
-
-		if (otg->state == OTG_STATE_B_IDLE)
-			pm_runtime_put_sync(otg->usb_phy->dev);
-		break;
-	case OTG_STATE_B_PERIPHERAL:
-		dev_dbg(otg->usb_phy->dev, "OTG_STATE_B_PERIPHERAL state\n");
-		if (!test_bit(B_SESS_VLD, &motg->inputs) ||
-				!test_bit(ID, &motg->inputs)) {
-			msm_otg_notify_charger(motg, 0);
-			msm_otg_start_peripheral(otg->usb_phy, 0);
-			motg->chg_state = USB_CHG_STATE_UNDEFINED;
-			motg->chg_type = USB_INVALID_CHARGER;
-			otg->state = OTG_STATE_B_IDLE;
-			msm_otg_reset(otg->usb_phy);
-			schedule_work(w);
-		}
-		break;
-	case OTG_STATE_A_HOST:
-		dev_dbg(otg->usb_phy->dev, "OTG_STATE_A_HOST state\n");
-		if (test_bit(ID, &motg->inputs)) {
-			msm_otg_start_host(otg->usb_phy, 0);
-			otg->state = OTG_STATE_B_IDLE;
-			msm_otg_reset(otg->usb_phy);
-			schedule_work(w);
-		}
-		break;
-	default:
-		break;
-	}
-}
-
-static irqreturn_t msm_otg_irq(int irq, void *data)
-{
-	struct msm_otg *motg = data;
-	struct usb_phy *phy = &motg->phy;
-	u32 otgsc = 0;
-
-	if (atomic_read(&motg->in_lpm)) {
-		disable_irq_nosync(irq);
-		motg->async_int = 1;
-		pm_runtime_get(phy->dev);
-		return IRQ_HANDLED;
-	}
-
-	otgsc = readl(USB_OTGSC);
-	if (!(otgsc & (OTGSC_IDIS | OTGSC_BSVIS)))
-		return IRQ_NONE;
-
-	if ((otgsc & OTGSC_IDIS) && (otgsc & OTGSC_IDIE)) {
-		if (otgsc & OTGSC_ID)
-			set_bit(ID, &motg->inputs);
-		else
-			clear_bit(ID, &motg->inputs);
-		dev_dbg(phy->dev, "ID set/clear\n");
-		pm_runtime_get_noresume(phy->dev);
-	} else if ((otgsc & OTGSC_BSVIS) && (otgsc & OTGSC_BSVIE)) {
-		if (otgsc & OTGSC_BSV)
-			set_bit(B_SESS_VLD, &motg->inputs);
-		else
-			clear_bit(B_SESS_VLD, &motg->inputs);
-		dev_dbg(phy->dev, "BSV set/clear\n");
-		pm_runtime_get_noresume(phy->dev);
-	}
-
-	writel(otgsc, USB_OTGSC);
-	schedule_work(&motg->sm_work);
-	return IRQ_HANDLED;
-}
-
-static int msm_otg_mode_show(struct seq_file *s, void *unused)
-{
-	struct msm_otg *motg = s->private;
-	struct usb_otg *otg = motg->phy.otg;
-
-	switch (otg->state) {
-	case OTG_STATE_A_HOST:
-		seq_puts(s, "host\n");
-		break;
-	case OTG_STATE_B_PERIPHERAL:
-		seq_puts(s, "peripheral\n");
-		break;
-	default:
-		seq_puts(s, "none\n");
-		break;
-	}
-
-	return 0;
-}
-
-static int msm_otg_mode_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, msm_otg_mode_show, inode->i_private);
-}
-
-static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
-				size_t count, loff_t *ppos)
-{
-	struct seq_file *s = file->private_data;
-	struct msm_otg *motg = s->private;
-	char buf[16];
-	struct usb_otg *otg = motg->phy.otg;
-	int status = count;
-	enum usb_dr_mode req_mode;
-
-	memset(buf, 0x00, sizeof(buf));
-
-	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) {
-		status = -EFAULT;
-		goto out;
-	}
-
-	if (!strncmp(buf, "host", 4)) {
-		req_mode = USB_DR_MODE_HOST;
-	} else if (!strncmp(buf, "peripheral", 10)) {
-		req_mode = USB_DR_MODE_PERIPHERAL;
-	} else if (!strncmp(buf, "none", 4)) {
-		req_mode = USB_DR_MODE_UNKNOWN;
-	} else {
-		status = -EINVAL;
-		goto out;
-	}
-
-	switch (req_mode) {
-	case USB_DR_MODE_UNKNOWN:
-		switch (otg->state) {
-		case OTG_STATE_A_HOST:
-		case OTG_STATE_B_PERIPHERAL:
-			set_bit(ID, &motg->inputs);
-			clear_bit(B_SESS_VLD, &motg->inputs);
-			break;
-		default:
-			goto out;
-		}
-		break;
-	case USB_DR_MODE_PERIPHERAL:
-		switch (otg->state) {
-		case OTG_STATE_B_IDLE:
-		case OTG_STATE_A_HOST:
-			set_bit(ID, &motg->inputs);
-			set_bit(B_SESS_VLD, &motg->inputs);
-			break;
-		default:
-			goto out;
-		}
-		break;
-	case USB_DR_MODE_HOST:
-		switch (otg->state) {
-		case OTG_STATE_B_IDLE:
-		case OTG_STATE_B_PERIPHERAL:
-			clear_bit(ID, &motg->inputs);
-			break;
-		default:
-			goto out;
-		}
-		break;
-	default:
-		goto out;
-	}
-
-	pm_runtime_get_sync(otg->usb_phy->dev);
-	schedule_work(&motg->sm_work);
-out:
-	return status;
-}
-
-static const struct file_operations msm_otg_mode_fops = {
-	.open = msm_otg_mode_open,
-	.read = seq_read,
-	.write = msm_otg_mode_write,
-	.llseek = seq_lseek,
-	.release = single_release,
-};
-
-static struct dentry *msm_otg_dbg_root;
-static struct dentry *msm_otg_dbg_mode;
-
-static int msm_otg_debugfs_init(struct msm_otg *motg)
-{
-	msm_otg_dbg_root = debugfs_create_dir("msm_otg", NULL);
-
-	if (!msm_otg_dbg_root || IS_ERR(msm_otg_dbg_root))
-		return -ENODEV;
-
-	msm_otg_dbg_mode = debugfs_create_file("mode", S_IRUGO | S_IWUSR,
-				msm_otg_dbg_root, motg, &msm_otg_mode_fops);
-	if (!msm_otg_dbg_mode) {
-		debugfs_remove(msm_otg_dbg_root);
-		msm_otg_dbg_root = NULL;
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-static void msm_otg_debugfs_cleanup(void)
-{
-	debugfs_remove(msm_otg_dbg_mode);
-	debugfs_remove(msm_otg_dbg_root);
-}
-
-static const struct of_device_id msm_otg_dt_match[] = {
-	{
-		.compatible = "qcom,usb-otg-ci",
-		.data = (void *) CI_45NM_INTEGRATED_PHY
-	},
-	{
-		.compatible = "qcom,usb-otg-snps",
-		.data = (void *) SNPS_28NM_INTEGRATED_PHY
-	},
-	{ }
-};
-MODULE_DEVICE_TABLE(of, msm_otg_dt_match);
-
-static int msm_otg_vbus_notifier(struct notifier_block *nb, unsigned long event,
-				void *ptr)
-{
-	struct usb_phy *usb_phy = container_of(nb, struct usb_phy, vbus_nb);
-	struct msm_otg *motg = container_of(usb_phy, struct msm_otg, phy);
-
-	if (event)
-		set_bit(B_SESS_VLD, &motg->inputs);
-	else
-		clear_bit(B_SESS_VLD, &motg->inputs);
-
-	if (test_bit(B_SESS_VLD, &motg->inputs)) {
-		/* Switch D+/D- lines to Device connector */
-		gpiod_set_value_cansleep(motg->switch_gpio, 0);
-	} else {
-		/* Switch D+/D- lines to Hub */
-		gpiod_set_value_cansleep(motg->switch_gpio, 1);
-	}
-
-	schedule_work(&motg->sm_work);
-
-	return NOTIFY_DONE;
-}
-
-static int msm_otg_id_notifier(struct notifier_block *nb, unsigned long event,
-				void *ptr)
-{
-	struct usb_phy *usb_phy = container_of(nb, struct usb_phy, id_nb);
-	struct msm_otg *motg = container_of(usb_phy, struct msm_otg, phy);
-
-	if (event)
-		clear_bit(ID, &motg->inputs);
-	else
-		set_bit(ID, &motg->inputs);
-
-	schedule_work(&motg->sm_work);
-
-	return NOTIFY_DONE;
-}
-
-static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
-{
-	struct msm_otg_platform_data *pdata;
-	struct device_node *node = pdev->dev.of_node;
-	struct property *prop;
-	int len, ret, words;
-	u32 val, tmp[3];
-
-	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
-	if (!pdata)
-		return -ENOMEM;
-
-	motg->pdata = pdata;
-
-	pdata->phy_type = (enum msm_usb_phy_type)of_device_get_match_data(&pdev->dev);
-	if (!pdata->phy_type)
-		return 1;
-
-	motg->link_rst = devm_reset_control_get(&pdev->dev, "link");
-	if (IS_ERR(motg->link_rst))
-		return PTR_ERR(motg->link_rst);
-
-	motg->phy_rst = devm_reset_control_get(&pdev->dev, "phy");
-	if (IS_ERR(motg->phy_rst))
-		motg->phy_rst = NULL;
-
-	pdata->mode = usb_get_dr_mode(&pdev->dev);
-	if (pdata->mode == USB_DR_MODE_UNKNOWN)
-		pdata->mode = USB_DR_MODE_OTG;
-
-	pdata->otg_control = OTG_PHY_CONTROL;
-	if (!of_property_read_u32(node, "qcom,otg-control", &val))
-		if (val == OTG_PMIC_CONTROL)
-			pdata->otg_control = val;
-
-	if (!of_property_read_u32(node, "qcom,phy-num", &val) && val < 2)
-		motg->phy_number = val;
-
-	motg->vdd_levels[VDD_LEVEL_NONE] = USB_PHY_SUSP_DIG_VOL;
-	motg->vdd_levels[VDD_LEVEL_MIN] = USB_PHY_VDD_DIG_VOL_MIN;
-	motg->vdd_levels[VDD_LEVEL_MAX] = USB_PHY_VDD_DIG_VOL_MAX;
-
-	if (of_get_property(node, "qcom,vdd-levels", &len) &&
-	    len == sizeof(tmp)) {
-		of_property_read_u32_array(node, "qcom,vdd-levels",
-					   tmp, len / sizeof(*tmp));
-		motg->vdd_levels[VDD_LEVEL_NONE] = tmp[VDD_LEVEL_NONE];
-		motg->vdd_levels[VDD_LEVEL_MIN] = tmp[VDD_LEVEL_MIN];
-		motg->vdd_levels[VDD_LEVEL_MAX] = tmp[VDD_LEVEL_MAX];
-	}
-
-	motg->manual_pullup = of_property_read_bool(node, "qcom,manual-pullup");
-
-	motg->switch_gpio = devm_gpiod_get_optional(&pdev->dev, "switch",
-						    GPIOD_OUT_LOW);
-	if (IS_ERR(motg->switch_gpio))
-		return PTR_ERR(motg->switch_gpio);
-
-	prop = of_find_property(node, "qcom,phy-init-sequence", &len);
-	if (!prop || !len)
-		return 0;
-
-	words = len / sizeof(u32);
-
-	if (words >= ULPI_EXT_VENDOR_SPECIFIC) {
-		dev_warn(&pdev->dev, "Too big PHY init sequence %d\n", words);
-		return 0;
-	}
-
-	pdata->phy_init_seq = devm_kzalloc(&pdev->dev, len, GFP_KERNEL);
-	if (!pdata->phy_init_seq)
-		return 0;
-
-	ret = of_property_read_u32_array(node, "qcom,phy-init-sequence",
-					 pdata->phy_init_seq, words);
-	if (!ret)
-		pdata->phy_init_sz = words;
-
-	return 0;
-}
-
-static int msm_otg_reboot_notify(struct notifier_block *this,
-				 unsigned long code, void *unused)
-{
-	struct msm_otg *motg = container_of(this, struct msm_otg, reboot);
-
-	/*
-	 * Ensure that D+/D- lines are routed to uB connector, so
-	 * we could load bootloader/kernel at next reboot
-	 */
-	gpiod_set_value_cansleep(motg->switch_gpio, 0);
-	return NOTIFY_DONE;
-}
-
-static int msm_otg_probe(struct platform_device *pdev)
-{
-	int ret = 0;
-	struct device_node *np = pdev->dev.of_node;
-	struct msm_otg_platform_data *pdata;
-	struct resource *res;
-	struct msm_otg *motg;
-	struct usb_phy *phy;
-	void __iomem *phy_select;
-
-	motg = devm_kzalloc(&pdev->dev, sizeof(struct msm_otg), GFP_KERNEL);
-	if (!motg)
-		return -ENOMEM;
-
-	motg->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg),
-				     GFP_KERNEL);
-	if (!motg->phy.otg)
-		return -ENOMEM;
-
-	phy = &motg->phy;
-	phy->dev = &pdev->dev;
-
-	motg->clk = devm_clk_get(&pdev->dev, np ? "core" : "usb_hs_clk");
-	if (IS_ERR(motg->clk)) {
-		dev_err(&pdev->dev, "failed to get usb_hs_clk\n");
-		return PTR_ERR(motg->clk);
-	}
-
-	/*
-	 * If USB Core is running its protocol engine based on CORE CLK,
-	 * CORE CLK  must be running at >55Mhz for correct HSUSB
-	 * operation and USB core cannot tolerate frequency changes on
-	 * CORE CLK.
-	 */
-	motg->pclk = devm_clk_get(&pdev->dev, np ? "iface" : "usb_hs_pclk");
-	if (IS_ERR(motg->pclk)) {
-		dev_err(&pdev->dev, "failed to get usb_hs_pclk\n");
-		return PTR_ERR(motg->pclk);
-	}
-
-	/*
-	 * USB core clock is not present on all MSM chips. This
-	 * clock is introduced to remove the dependency on AXI
-	 * bus frequency.
-	 */
-	motg->core_clk = devm_clk_get(&pdev->dev,
-				      np ? "alt_core" : "usb_hs_core_clk");
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -EINVAL;
-	motg->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
-	if (!motg->regs)
-		return -ENOMEM;
-
-	pdata = dev_get_platdata(&pdev->dev);
-	if (!pdata) {
-		if (!np)
-			return -ENXIO;
-		ret = msm_otg_read_dt(pdev, motg);
-		if (ret)
-			return ret;
-	}
-
-	/*
-	 * NOTE: The PHYs can be multiplexed between the chipidea controller
-	 * and the dwc3 controller, using a single bit. It is important that
-	 * the dwc3 driver does not set this bit in an incompatible way.
-	 */
-	if (motg->phy_number) {
-		phy_select = devm_ioremap_nocache(&pdev->dev, USB2_PHY_SEL, 4);
-		if (!phy_select)
-			return -ENOMEM;
-
-		/* Enable second PHY with the OTG port */
-		writel(0x1, phy_select);
-	}
-
-	dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs);
-
-	motg->irq = platform_get_irq(pdev, 0);
-	if (motg->irq < 0) {
-		dev_err(&pdev->dev, "platform_get_irq failed\n");
-		ret = motg->irq;
-		return motg->irq;
-	}
-
-	motg->supplies[0].supply = "vddcx";
-	motg->supplies[1].supply = "v3p3";
-	motg->supplies[2].supply = "v1p8";
-
-	ret = devm_regulator_bulk_get(motg->phy.dev, ARRAY_SIZE(motg->supplies),
-				      motg->supplies);
-	if (ret)
-		return ret;
-
-	motg->vddcx = motg->supplies[0].consumer;
-	motg->v3p3  = motg->supplies[1].consumer;
-	motg->v1p8  = motg->supplies[2].consumer;
-
-	clk_set_rate(motg->clk, 60000000);
-
-	clk_prepare_enable(motg->clk);
-	clk_prepare_enable(motg->pclk);
-
-	if (!IS_ERR(motg->core_clk))
-		clk_prepare_enable(motg->core_clk);
-
-	ret = msm_hsusb_init_vddcx(motg, 1);
-	if (ret) {
-		dev_err(&pdev->dev, "hsusb vddcx configuration failed\n");
-		goto disable_clks;
-	}
-
-	ret = msm_hsusb_ldo_init(motg, 1);
-	if (ret) {
-		dev_err(&pdev->dev, "hsusb vreg configuration failed\n");
-		goto disable_vddcx;
-	}
-	ret = msm_hsusb_ldo_set_mode(motg, 1);
-	if (ret) {
-		dev_err(&pdev->dev, "hsusb vreg enable failed\n");
-		goto disable_ldo;
-	}
-
-	writel(0, USB_USBINTR);
-	writel(0, USB_OTGSC);
-
-	INIT_WORK(&motg->sm_work, msm_otg_sm_work);
-	INIT_DELAYED_WORK(&motg->chg_work, msm_chg_detect_work);
-	ret = devm_request_irq(&pdev->dev, motg->irq, msm_otg_irq, IRQF_SHARED,
-					"msm_otg", motg);
-	if (ret) {
-		dev_err(&pdev->dev, "request irq failed\n");
-		goto disable_ldo;
-	}
-
-	phy->init = msm_phy_init;
-	phy->notify_disconnect = msm_phy_notify_disconnect;
-	phy->type = USB_PHY_TYPE_USB2;
-	phy->vbus_nb.notifier_call = msm_otg_vbus_notifier;
-	phy->id_nb.notifier_call = msm_otg_id_notifier;
-
-	phy->io_ops = &msm_otg_io_ops;
-
-	phy->otg->usb_phy = &motg->phy;
-	phy->otg->set_host = msm_otg_set_host;
-	phy->otg->set_peripheral = msm_otg_set_peripheral;
-
-	msm_usb_reset(phy);
-
-	ret = usb_add_phy_dev(&motg->phy);
-	if (ret) {
-		dev_err(&pdev->dev, "usb_add_phy failed\n");
-		goto disable_ldo;
-	}
-
-	ret = extcon_get_state(phy->edev, EXTCON_USB);
-	if (ret)
-		set_bit(B_SESS_VLD, &motg->inputs);
-	else
-		clear_bit(B_SESS_VLD, &motg->inputs);
-
-	ret = extcon_get_state(phy->id_edev, EXTCON_USB_HOST);
-	if (ret)
-		clear_bit(ID, &motg->inputs);
-	else
-		set_bit(ID, &motg->inputs);
-
-	platform_set_drvdata(pdev, motg);
-	device_init_wakeup(&pdev->dev, 1);
-
-	if (motg->pdata->mode == USB_DR_MODE_OTG &&
-		motg->pdata->otg_control == OTG_USER_CONTROL) {
-		ret = msm_otg_debugfs_init(motg);
-		if (ret)
-			dev_dbg(&pdev->dev, "Can not create mode change file\n");
-	}
-
-	if (test_bit(B_SESS_VLD, &motg->inputs)) {
-		/* Switch D+/D- lines to Device connector */
-		gpiod_set_value_cansleep(motg->switch_gpio, 0);
-	} else {
-		/* Switch D+/D- lines to Hub */
-		gpiod_set_value_cansleep(motg->switch_gpio, 1);
-	}
-
-	motg->reboot.notifier_call = msm_otg_reboot_notify;
-	register_reboot_notifier(&motg->reboot);
-
-	pm_runtime_set_active(&pdev->dev);
-	pm_runtime_enable(&pdev->dev);
-
-	return 0;
-
-disable_ldo:
-	msm_hsusb_ldo_init(motg, 0);
-disable_vddcx:
-	msm_hsusb_init_vddcx(motg, 0);
-disable_clks:
-	clk_disable_unprepare(motg->pclk);
-	clk_disable_unprepare(motg->clk);
-	if (!IS_ERR(motg->core_clk))
-		clk_disable_unprepare(motg->core_clk);
-
-	return ret;
-}
-
-static int msm_otg_remove(struct platform_device *pdev)
-{
-	struct msm_otg *motg = platform_get_drvdata(pdev);
-	struct usb_phy *phy = &motg->phy;
-	int cnt = 0;
-
-	if (phy->otg->host || phy->otg->gadget)
-		return -EBUSY;
-
-	unregister_reboot_notifier(&motg->reboot);
-
-	/*
-	 * Ensure that D+/D- lines are routed to uB connector, so
-	 * we could load bootloader/kernel at next reboot
-	 */
-	gpiod_set_value_cansleep(motg->switch_gpio, 0);
-
-	msm_otg_debugfs_cleanup();
-	cancel_delayed_work_sync(&motg->chg_work);
-	cancel_work_sync(&motg->sm_work);
-
-	pm_runtime_resume(&pdev->dev);
-
-	device_init_wakeup(&pdev->dev, 0);
-	pm_runtime_disable(&pdev->dev);
-
-	usb_remove_phy(phy);
-	disable_irq(motg->irq);
-
-	/*
-	 * Put PHY in low power mode.
-	 */
-	ulpi_read(phy, 0x14);
-	ulpi_write(phy, 0x08, 0x09);
-
-	writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
-	while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
-		if (readl(USB_PORTSC) & PORTSC_PHCD)
-			break;
-		udelay(1);
-		cnt++;
-	}
-	if (cnt >= PHY_SUSPEND_TIMEOUT_USEC)
-		dev_err(phy->dev, "Unable to suspend PHY\n");
-
-	clk_disable_unprepare(motg->pclk);
-	clk_disable_unprepare(motg->clk);
-	if (!IS_ERR(motg->core_clk))
-		clk_disable_unprepare(motg->core_clk);
-	msm_hsusb_ldo_init(motg, 0);
-
-	pm_runtime_set_suspended(&pdev->dev);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int msm_otg_runtime_idle(struct device *dev)
-{
-	struct msm_otg *motg = dev_get_drvdata(dev);
-	struct usb_otg *otg = motg->phy.otg;
-
-	dev_dbg(dev, "OTG runtime idle\n");
-
-	/*
-	 * It is observed some times that a spurious interrupt
-	 * comes when PHY is put into LPM immediately after PHY reset.
-	 * This 1 sec delay also prevents entering into LPM immediately
-	 * after asynchronous interrupt.
-	 */
-	if (otg->state != OTG_STATE_UNDEFINED)
-		pm_schedule_suspend(dev, 1000);
-
-	return -EAGAIN;
-}
-
-static int msm_otg_runtime_suspend(struct device *dev)
-{
-	struct msm_otg *motg = dev_get_drvdata(dev);
-
-	dev_dbg(dev, "OTG runtime suspend\n");
-	return msm_otg_suspend(motg);
-}
-
-static int msm_otg_runtime_resume(struct device *dev)
-{
-	struct msm_otg *motg = dev_get_drvdata(dev);
-
-	dev_dbg(dev, "OTG runtime resume\n");
-	return msm_otg_resume(motg);
-}
-#endif
-
-#ifdef CONFIG_PM_SLEEP
-static int msm_otg_pm_suspend(struct device *dev)
-{
-	struct msm_otg *motg = dev_get_drvdata(dev);
-
-	dev_dbg(dev, "OTG PM suspend\n");
-	return msm_otg_suspend(motg);
-}
-
-static int msm_otg_pm_resume(struct device *dev)
-{
-	struct msm_otg *motg = dev_get_drvdata(dev);
-	int ret;
-
-	dev_dbg(dev, "OTG PM resume\n");
-
-	ret = msm_otg_resume(motg);
-	if (ret)
-		return ret;
-
-	/*
-	 * Runtime PM Documentation recommends bringing the
-	 * device to full powered state upon resume.
-	 */
-	pm_runtime_disable(dev);
-	pm_runtime_set_active(dev);
-	pm_runtime_enable(dev);
-
-	return 0;
-}
-#endif
-
-static const struct dev_pm_ops msm_otg_dev_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume)
-	SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume,
-				msm_otg_runtime_idle)
-};
-
-static struct platform_driver msm_otg_driver = {
-	.probe = msm_otg_probe,
-	.remove = msm_otg_remove,
-	.driver = {
-		.name = DRIVER_NAME,
-		.pm = &msm_otg_dev_pm_ops,
-		.of_match_table = msm_otg_dt_match,
-	},
-};
-
-module_platform_driver(msm_otg_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("MSM USB transceiver driver");
diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c
index 0e315694adc9..554b72282276 100644
--- a/drivers/usb/phy/phy-mv-usb.c
+++ b/drivers/usb/phy/phy-mv-usb.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
  * Author: Chao Xie <chao.xie@marvell.com>
  *	   Neil Zhang <zhangwm@marvell.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #include <linux/module.h>
@@ -87,9 +83,10 @@ static void mv_otg_run_state_machine(struct mv_otg *mvotg,
 	queue_delayed_work(mvotg->qwork, &mvotg->work, delay);
 }
 
-static void mv_otg_timer_await_bcon(unsigned long data)
+static void mv_otg_timer_await_bcon(struct timer_list *t)
 {
-	struct mv_otg *mvotg = (struct mv_otg *) data;
+	struct mv_otg *mvotg = from_timer(mvotg, t,
+					  otg_ctrl.timer[A_WAIT_BCON_TIMER]);
 
 	mvotg->otg_ctrl.a_wait_bcon_timeout = 1;
 
@@ -117,8 +114,7 @@ static int mv_otg_cancel_timer(struct mv_otg *mvotg, unsigned int id)
 }
 
 static int mv_otg_set_timer(struct mv_otg *mvotg, unsigned int id,
-			    unsigned long interval,
-			    void (*callback) (unsigned long))
+			    unsigned long interval)
 {
 	struct timer_list *timer;
 
@@ -131,9 +127,6 @@ static int mv_otg_set_timer(struct mv_otg *mvotg, unsigned int id,
 		return -EBUSY;
 	}
 
-	init_timer(timer);
-	timer->data = (unsigned long) mvotg;
-	timer->function = callback;
 	timer->expires = jiffies + interval;
 	add_timer(timer);
 
@@ -459,8 +452,7 @@ run:
 			if (old_state != OTG_STATE_A_HOST)
 				mv_otg_start_host(mvotg, 1);
 			mv_otg_set_timer(mvotg, A_WAIT_BCON_TIMER,
-					 T_A_WAIT_BCON,
-					 mv_otg_timer_await_bcon);
+					 T_A_WAIT_BCON);
 			/*
 			 * Now, we directly enter A_HOST. So set b_conn = 1
 			 * here. In fact, it need host driver to notify us.
@@ -722,7 +714,8 @@ static int mv_otg_probe(struct platform_device *pdev)
 	otg->set_vbus = mv_otg_set_vbus;
 
 	for (i = 0; i < OTG_TIMER_NUM; i++)
-		init_timer(&mvotg->otg_ctrl.timer[i]);
+		timer_setup(&mvotg->otg_ctrl.timer[i],
+			    mv_otg_timer_await_bcon, 0);
 
 	r = platform_get_resource_byname(mvotg->pdev,
 					 IORESOURCE_MEM, "phyregs");
diff --git a/drivers/usb/phy/phy-mv-usb.h b/drivers/usb/phy/phy-mv-usb.h
index 551da6eb0ba8..96701a1229ad 100644
--- a/drivers/usb/phy/phy-mv-usb.h
+++ b/drivers/usb/phy/phy-mv-usb.h
@@ -1,10 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #ifndef	__MV_USB_OTG_CONTROLLER__
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 0e2f1a36d315..da031c45395a 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -1,14 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2012-2014 Freescale Semiconductor, Inc.
  * Copyright (C) 2012 Marek Vasut <marex@denx.de>
  * on behalf of DENX Software Engineering GmbH
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include <linux/module.h>
@@ -67,11 +61,26 @@
 #define ANADIG_ANA_MISC0_SET			0x154
 #define ANADIG_ANA_MISC0_CLR			0x158
 
+#define ANADIG_USB1_CHRG_DETECT_SET		0x1b4
+#define ANADIG_USB1_CHRG_DETECT_CLR		0x1b8
+#define ANADIG_USB1_CHRG_DETECT_EN_B		BIT(20)
+#define ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B	BIT(19)
+#define ANADIG_USB1_CHRG_DETECT_CHK_CONTACT	BIT(18)
+
 #define ANADIG_USB1_VBUS_DET_STAT		0x1c0
+#define ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID	BIT(3)
+
+#define ANADIG_USB1_CHRG_DET_STAT		0x1d0
+#define ANADIG_USB1_CHRG_DET_STAT_DM_STATE	BIT(2)
+#define ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED	BIT(1)
+#define ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT	BIT(0)
+
 #define ANADIG_USB2_VBUS_DET_STAT		0x220
 
 #define ANADIG_USB1_LOOPBACK_SET		0x1e4
 #define ANADIG_USB1_LOOPBACK_CLR		0x1e8
+#define ANADIG_USB1_LOOPBACK_UTMI_TESTSTART	BIT(0)
+
 #define ANADIG_USB2_LOOPBACK_SET		0x244
 #define ANADIG_USB2_LOOPBACK_CLR		0x248
 
@@ -479,6 +488,144 @@ static int mxs_phy_on_disconnect(struct usb_phy *phy,
 	return 0;
 }
 
+#define MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT	100
+static int mxs_charger_data_contact_detect(struct mxs_phy *x)
+{
+	struct regmap *regmap = x->regmap_anatop;
+	int i, stable_contact_count = 0;
+	u32 val;
+
+	/* Check if vbus is valid */
+	regmap_read(regmap, ANADIG_USB1_VBUS_DET_STAT, &val);
+	if (!(val & ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)) {
+		dev_err(x->phy.dev, "vbus is not valid\n");
+		return -EINVAL;
+	}
+
+	/* Enable charger detector */
+	regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_CLR,
+				ANADIG_USB1_CHRG_DETECT_EN_B);
+	/*
+	 * - Do not check whether a charger is connected to the USB port
+	 * - Check whether the USB plug has been in contact with each other
+	 */
+	regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET,
+			ANADIG_USB1_CHRG_DETECT_CHK_CONTACT |
+			ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
+
+	/* Check if plug is connected */
+	for (i = 0; i < MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT; i++) {
+		regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val);
+		if (val & ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT) {
+			stable_contact_count++;
+			if (stable_contact_count > 5)
+				/* Data pin makes contact */
+				break;
+			else
+				usleep_range(5000, 10000);
+		} else {
+			stable_contact_count = 0;
+			usleep_range(5000, 6000);
+		}
+	}
+
+	if (i == MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT) {
+		dev_err(x->phy.dev,
+			"Data pin can't make good contact.\n");
+		/* Disable charger detector */
+		regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET,
+				ANADIG_USB1_CHRG_DETECT_EN_B |
+				ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static enum usb_charger_type mxs_charger_primary_detection(struct mxs_phy *x)
+{
+	struct regmap *regmap = x->regmap_anatop;
+	enum usb_charger_type chgr_type = UNKNOWN_TYPE;
+	u32 val;
+
+	/*
+	 * - Do check whether a charger is connected to the USB port
+	 * - Do not Check whether the USB plug has been in contact with
+	 *   each other
+	 */
+	regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_CLR,
+			ANADIG_USB1_CHRG_DETECT_CHK_CONTACT |
+			ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
+
+	msleep(100);
+
+	/* Check if it is a charger */
+	regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val);
+	if (!(val & ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED)) {
+		chgr_type = SDP_TYPE;
+		dev_dbg(x->phy.dev, "It is a stardard downstream port\n");
+	}
+
+	/* Disable charger detector */
+	regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET,
+			ANADIG_USB1_CHRG_DETECT_EN_B |
+			ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
+
+	return chgr_type;
+}
+
+/*
+ * It must be called after DP is pulled up, which is used to
+ * differentiate DCP and CDP.
+ */
+enum usb_charger_type mxs_charger_secondary_detection(struct mxs_phy *x)
+{
+	struct regmap *regmap = x->regmap_anatop;
+	int val;
+
+	msleep(80);
+
+	regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val);
+	if (val & ANADIG_USB1_CHRG_DET_STAT_DM_STATE) {
+		dev_dbg(x->phy.dev, "It is a dedicate charging port\n");
+		return DCP_TYPE;
+	} else {
+		dev_dbg(x->phy.dev, "It is a charging downstream port\n");
+		return CDP_TYPE;
+	}
+}
+
+static enum usb_charger_type mxs_phy_charger_detect(struct usb_phy *phy)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+	struct regmap *regmap = mxs_phy->regmap_anatop;
+	void __iomem *base = phy->io_priv;
+	enum usb_charger_type chgr_type = UNKNOWN_TYPE;
+
+	if (mxs_charger_data_contact_detect(mxs_phy))
+		return chgr_type;
+
+	chgr_type = mxs_charger_primary_detection(mxs_phy);
+
+	if (chgr_type != SDP_TYPE) {
+		/* Pull up DP via test */
+		writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
+				base + HW_USBPHY_DEBUG_CLR);
+		regmap_write(regmap, ANADIG_USB1_LOOPBACK_SET,
+				ANADIG_USB1_LOOPBACK_UTMI_TESTSTART);
+
+		chgr_type = mxs_charger_secondary_detection(mxs_phy);
+
+		/* Stop the test */
+		regmap_write(regmap, ANADIG_USB1_LOOPBACK_CLR,
+				ANADIG_USB1_LOOPBACK_UTMI_TESTSTART);
+		writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
+				base + HW_USBPHY_DEBUG_SET);
+	}
+
+	return chgr_type;
+}
+
 static int mxs_phy_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -567,6 +714,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
 	mxs_phy->phy.notify_disconnect	= mxs_phy_on_disconnect;
 	mxs_phy->phy.type		= USB_PHY_TYPE_USB2;
 	mxs_phy->phy.set_wakeup		= mxs_phy_set_wakeup;
+	mxs_phy->phy.charger_detect	= mxs_phy_charger_detect;
 
 	mxs_phy->clk = clk;
 	mxs_phy->data = of_id->data;
diff --git a/drivers/usb/phy/phy-omap-otg.c b/drivers/usb/phy/phy-omap-otg.c
index 800d1d90753d..ee0863c6553e 100644
--- a/drivers/usb/phy/phy-omap-otg.c
+++ b/drivers/usb/phy/phy-omap-otg.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * OMAP OTG controller driver
  *
@@ -6,15 +7,6 @@
  * Copyright (C) 2005-2006 Nokia Corporation
  * Copyright (C) 2004 Texas Instruments
  * Copyright (C) 2004 David Brownell
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of this
- * archive for more details.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
  */
 
 #include <linux/io.h>
diff --git a/drivers/usb/phy/phy-qcom-8x16-usb.c b/drivers/usb/phy/phy-qcom-8x16-usb.c
deleted file mode 100644
index 679afeaaa9a8..000000000000
--- a/drivers/usb/phy/phy-qcom-8x16-usb.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Copyright (c) 2015, Linaro Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/extcon.h>
-#include <linux/gpio/consumer.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/regulator/consumer.h>
-#include <linux/reset.h>
-#include <linux/slab.h>
-#include <linux/usb.h>
-#include <linux/usb/ulpi.h>
-
-#define HSPHY_AHBBURST			0x0090
-#define HSPHY_AHBMODE			0x0098
-#define HSPHY_GENCONFIG			0x009c
-#define HSPHY_GENCONFIG_2		0x00a0
-
-#define HSPHY_USBCMD			0x0140
-#define HSPHY_ULPI_VIEWPORT		0x0170
-#define HSPHY_CTRL			0x0240
-
-#define HSPHY_TXFIFO_IDLE_FORCE_DIS	BIT(4)
-#define HSPHY_SESS_VLD_CTRL_EN		BIT(7)
-#define HSPHY_POR_ASSERT		BIT(0)
-#define HSPHY_RETEN			BIT(1)
-
-#define HSPHY_SESS_VLD_CTRL		BIT(25)
-
-#define ULPI_PWR_CLK_MNG_REG		0x88
-#define ULPI_PWR_OTG_COMP_DISABLE	BIT(0)
-
-#define ULPI_MISC_A			0x96
-#define ULPI_MISC_A_VBUSVLDEXTSEL	BIT(1)
-#define ULPI_MISC_A_VBUSVLDEXT		BIT(0)
-
-#define HSPHY_3P3_MIN			3050000 /* uV */
-#define HSPHY_3P3_MAX			3300000 /* uV */
-
-#define HSPHY_1P8_MIN			1800000 /* uV */
-#define HSPHY_1P8_MAX			1800000 /* uV */
-
-#define HSPHY_VDD_MIN			5
-#define HSPHY_VDD_MAX			7
-
-struct phy_8x16 {
-	struct usb_phy			phy;
-	void __iomem			*regs;
-	struct clk			*core_clk;
-	struct clk			*iface_clk;
-	struct regulator_bulk_data	regulator[3];
-
-	struct reset_control		*phy_reset;
-
-	struct gpio_desc		*switch_gpio;
-	struct notifier_block		reboot_notify;
-};
-
-static int phy_8x16_notify_connect(struct usb_phy *phy,
-				   enum usb_device_speed speed)
-{
-	struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy);
-	u32 val;
-
-	val = ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT;
-	usb_phy_io_write(&qphy->phy, val, ULPI_SET(ULPI_MISC_A));
-
-	val = readl(qphy->regs + HSPHY_USBCMD);
-	val |= HSPHY_SESS_VLD_CTRL;
-	writel(val, qphy->regs + HSPHY_USBCMD);
-
-	return 0;
-}
-
-static int phy_8x16_notify_disconnect(struct usb_phy *phy,
-				      enum usb_device_speed speed)
-{
-	struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy);
-	u32 val;
-
-	val = ULPI_MISC_A_VBUSVLDEXT | ULPI_MISC_A_VBUSVLDEXTSEL;
-	usb_phy_io_write(&qphy->phy, val, ULPI_CLR(ULPI_MISC_A));
-
-	val = readl(qphy->regs + HSPHY_USBCMD);
-	val &= ~HSPHY_SESS_VLD_CTRL;
-	writel(val, qphy->regs + HSPHY_USBCMD);
-
-	return 0;
-}
-
-static int phy_8x16_vbus_on(struct phy_8x16 *qphy)
-{
-	phy_8x16_notify_connect(&qphy->phy, USB_SPEED_UNKNOWN);
-
-	/* Switch D+/D- lines to Device connector */
-	gpiod_set_value_cansleep(qphy->switch_gpio, 0);
-
-	return 0;
-}
-
-static int phy_8x16_vbus_off(struct phy_8x16 *qphy)
-{
-	phy_8x16_notify_disconnect(&qphy->phy, USB_SPEED_UNKNOWN);
-
-	/* Switch D+/D- lines to USB HUB */
-	gpiod_set_value_cansleep(qphy->switch_gpio, 1);
-
-	return 0;
-}
-
-static int phy_8x16_vbus_notify(struct notifier_block *nb, unsigned long event,
-				void *ptr)
-{
-	struct usb_phy *usb_phy = container_of(nb, struct usb_phy, vbus_nb);
-	struct phy_8x16 *qphy = container_of(usb_phy, struct phy_8x16, phy);
-
-	if (event)
-		phy_8x16_vbus_on(qphy);
-	else
-		phy_8x16_vbus_off(qphy);
-
-	return NOTIFY_DONE;
-}
-
-static int phy_8x16_init(struct usb_phy *phy)
-{
-	struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy);
-	u32 val, init[] = {0x44, 0x6B, 0x24, 0x13};
-	u32 addr = ULPI_EXT_VENDOR_SPECIFIC;
-	int idx, state;
-
-	for (idx = 0; idx < ARRAY_SIZE(init); idx++)
-		usb_phy_io_write(phy, init[idx], addr + idx);
-
-	reset_control_reset(qphy->phy_reset);
-
-	/* Assert USB HSPHY_POR */
-	val = readl(qphy->regs + HSPHY_CTRL);
-	val |= HSPHY_POR_ASSERT;
-	writel(val, qphy->regs + HSPHY_CTRL);
-
-	/*
-	 * wait for minimum 10 microseconds as suggested in HPG.
-	 * Use a slightly larger value since the exact value didn't
-	 * work 100% of the time.
-	 */
-	usleep_range(12, 15);
-
-	/* Deassert USB HSPHY_POR */
-	val = readl(qphy->regs + HSPHY_CTRL);
-	val &= ~HSPHY_POR_ASSERT;
-	writel(val, qphy->regs + HSPHY_CTRL);
-
-	usleep_range(10, 15);
-
-	writel(0x00, qphy->regs + HSPHY_AHBBURST);
-	writel(0x08, qphy->regs + HSPHY_AHBMODE);
-
-	/* workaround for rx buffer collision issue */
-	val = readl(qphy->regs + HSPHY_GENCONFIG);
-	val &= ~HSPHY_TXFIFO_IDLE_FORCE_DIS;
-	writel(val, qphy->regs + HSPHY_GENCONFIG);
-
-	val = readl(qphy->regs + HSPHY_GENCONFIG_2);
-	val |= HSPHY_SESS_VLD_CTRL_EN;
-	writel(val, qphy->regs + HSPHY_GENCONFIG_2);
-
-	val = ULPI_PWR_OTG_COMP_DISABLE;
-	usb_phy_io_write(phy, val, ULPI_SET(ULPI_PWR_CLK_MNG_REG));
-
-	state = extcon_get_state(qphy->phy.edev, EXTCON_USB);
-	if (state)
-		phy_8x16_vbus_on(qphy);
-	else
-		phy_8x16_vbus_off(qphy);
-
-	val = usb_phy_io_read(&qphy->phy, ULPI_FUNC_CTRL);
-	val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
-	val |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
-	usb_phy_io_write(&qphy->phy, val, ULPI_FUNC_CTRL);
-
-	return 0;
-}
-
-static void phy_8x16_shutdown(struct usb_phy *phy)
-{
-	u32 val;
-
-	/* Put the controller in non-driving mode */
-	val = usb_phy_io_read(phy, ULPI_FUNC_CTRL);
-	val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
-	val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
-	usb_phy_io_write(phy, val, ULPI_FUNC_CTRL);
-}
-
-static int phy_8x16_read_devicetree(struct phy_8x16 *qphy)
-{
-	struct device *dev = qphy->phy.dev;
-	int ret;
-
-	qphy->core_clk = devm_clk_get(dev, "core");
-	if (IS_ERR(qphy->core_clk))
-		return PTR_ERR(qphy->core_clk);
-
-	qphy->iface_clk = devm_clk_get(dev, "iface");
-	if (IS_ERR(qphy->iface_clk))
-		return PTR_ERR(qphy->iface_clk);
-
-	qphy->regulator[0].supply = "v3p3";
-	qphy->regulator[1].supply = "v1p8";
-	qphy->regulator[2].supply = "vddcx";
-
-	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(qphy->regulator),
-				      qphy->regulator);
-	if (ret)
-		return ret;
-
-	qphy->phy_reset = devm_reset_control_get(dev, "phy");
-	if (IS_ERR(qphy->phy_reset))
-		return PTR_ERR(qphy->phy_reset);
-
-	qphy->switch_gpio = devm_gpiod_get_optional(dev, "switch",
-						   GPIOD_OUT_LOW);
-	return PTR_ERR_OR_ZERO(qphy->switch_gpio);
-}
-
-static int phy_8x16_reboot_notify(struct notifier_block *this,
-				  unsigned long code, void *unused)
-{
-	struct phy_8x16 *qphy;
-
-	qphy = container_of(this, struct phy_8x16, reboot_notify);
-
-	/*
-	 * Ensure that D+/D- lines are routed to uB connector, so
-	 * we could load bootloader/kernel at next reboot_notify
-	 */
-	gpiod_set_value_cansleep(qphy->switch_gpio, 0);
-	return NOTIFY_DONE;
-}
-
-static int phy_8x16_probe(struct platform_device *pdev)
-{
-	struct phy_8x16 *qphy;
-	struct resource *res;
-	struct usb_phy *phy;
-	int ret;
-
-	qphy = devm_kzalloc(&pdev->dev, sizeof(*qphy), GFP_KERNEL);
-	if (!qphy)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, qphy);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	qphy->regs = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(qphy->regs))
-		return PTR_ERR(qphy->regs);
-
-	phy			= &qphy->phy;
-	phy->dev		= &pdev->dev;
-	phy->label		= dev_name(&pdev->dev);
-	phy->init		= phy_8x16_init;
-	phy->shutdown		= phy_8x16_shutdown;
-	phy->notify_connect	= phy_8x16_notify_connect;
-	phy->notify_disconnect	= phy_8x16_notify_disconnect;
-	phy->io_priv		= qphy->regs + HSPHY_ULPI_VIEWPORT;
-	phy->io_ops		= &ulpi_viewport_access_ops;
-	phy->type		= USB_PHY_TYPE_USB2;
-	phy->vbus_nb.notifier_call = phy_8x16_vbus_notify;
-	phy->id_nb.notifier_call = NULL;
-
-	ret = phy_8x16_read_devicetree(qphy);
-	if (ret < 0)
-		return ret;
-
-	ret = clk_set_rate(qphy->core_clk, INT_MAX);
-	if (ret < 0)
-		dev_dbg(phy->dev, "Can't boost core clock\n");
-
-	ret = clk_prepare_enable(qphy->core_clk);
-	if (ret < 0)
-		return ret;
-
-	ret = clk_prepare_enable(qphy->iface_clk);
-	if (ret < 0)
-		goto off_core;
-
-	ret = regulator_bulk_enable(ARRAY_SIZE(qphy->regulator),
-				    qphy->regulator);
-	if (WARN_ON(ret))
-		goto off_clks;
-
-	ret = usb_add_phy_dev(&qphy->phy);
-	if (ret)
-		goto off_power;
-
-	qphy->reboot_notify.notifier_call = phy_8x16_reboot_notify;
-	register_reboot_notifier(&qphy->reboot_notify);
-
-	return 0;
-
-off_power:
-	regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator);
-off_clks:
-	clk_disable_unprepare(qphy->iface_clk);
-off_core:
-	clk_disable_unprepare(qphy->core_clk);
-	return ret;
-}
-
-static int phy_8x16_remove(struct platform_device *pdev)
-{
-	struct phy_8x16 *qphy = platform_get_drvdata(pdev);
-
-	unregister_reboot_notifier(&qphy->reboot_notify);
-
-	/*
-	 * Ensure that D+/D- lines are routed to uB connector, so
-	 * we could load bootloader/kernel at next reboot_notify
-	 */
-	gpiod_set_value_cansleep(qphy->switch_gpio, 0);
-
-	usb_remove_phy(&qphy->phy);
-
-	clk_disable_unprepare(qphy->iface_clk);
-	clk_disable_unprepare(qphy->core_clk);
-	regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator);
-	return 0;
-}
-
-static const struct of_device_id phy_8x16_dt_match[] = {
-	{ .compatible = "qcom,usb-8x16-phy" },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, phy_8x16_dt_match);
-
-static struct platform_driver phy_8x16_driver = {
-	.probe	= phy_8x16_probe,
-	.remove = phy_8x16_remove,
-	.driver = {
-		.name = "phy-qcom-8x16-usb",
-		.of_match_table = phy_8x16_dt_match,
-	},
-};
-module_platform_driver(phy_8x16_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Qualcomm APQ8016/MSM8916 chipsets USB transceiver driver");
diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c
index 8babd318c0ed..b3ce42edb373 100644
--- a/drivers/usb/phy/phy-tahvo.c
+++ b/drivers/usb/phy/phy-tahvo.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Tahvo USB transceiver driver
  *
@@ -9,21 +10,12 @@
  *
  * Original driver written by Juha Yrjölä, Tony Lindgren and Timo Teräs.
  * Modified for Retu/Tahvo MFD by Aaro Koskinen.
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of this
- * archive for more details.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
  */
 
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/usb.h>
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/usb/otg.h>
@@ -368,7 +360,8 @@ static int tahvo_usb_probe(struct platform_device *pdev)
 	tu->extcon = devm_extcon_dev_allocate(&pdev->dev, tahvo_cable);
 	if (IS_ERR(tu->extcon)) {
 		dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
-		return -ENOMEM;
+		ret = PTR_ERR(tu->extcon);
+		goto err_disable_clk;
 	}
 
 	ret = devm_extcon_dev_register(&pdev->dev, tu->extcon);
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index ccc2bf5274b4..f668bfb708d3 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2010 Google, Inc.
  * Copyright (C) 2013 NVIDIA Corporation
@@ -6,16 +7,6 @@
  *	Erik Gilling <konkers@google.com>
  *	Benoit Goby <benoit@android.com>
  *	Venu Byravarasu <vbyravarasu@nvidia.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <linux/resource.h>
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index b5dc077ed7d3..e78ed52339e6 100644
--- a/drivers/usb/phy/phy-twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -1,23 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver.
  *
  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  *
  * Author: Hema HK <hemahk@ti.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/phy/phy-ulpi-viewport.c b/drivers/usb/phy/phy-ulpi-viewport.c
index 18bb8264b5a0..7a14e0e3b635 100644
--- a/drivers/usb/phy/phy-ulpi-viewport.c
+++ b/drivers/usb/phy/phy-ulpi-viewport.c
@@ -1,15 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2011 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <linux/export.h>
diff --git a/drivers/usb/phy/phy-ulpi.c b/drivers/usb/phy/phy-ulpi.c
index f48a7a21e3c2..a43c49369a60 100644
--- a/drivers/usb/phy/phy-ulpi.c
+++ b/drivers/usb/phy/phy-ulpi.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Generic ULPI USB transceiver support
  *
@@ -7,20 +8,6 @@
  *
  *   Sascha Hauer <s.hauer@pengutronix.de>
  *   Freescale Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
index 89f4ac4cd93e..f97cb47577fc 100644
--- a/drivers/usb/phy/phy.c
+++ b/drivers/usb/phy/phy.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * phy.c -- USB phy handling
  *
  * Copyright (C) 2004-2013 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 #include <linux/kernel.h>
 #include <linux/export.h>
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index f0ce304c5aaf..56079bb6759a 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * Renesas USB driver
  *
  * Copyright (C) 2011 Renesas Solutions Corp.
  * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 #include <linux/err.h>
 #include <linux/gpio.h>
@@ -486,6 +477,10 @@ static const struct of_device_id usbhs_of_match[] = {
 		.data = (void *)USBHS_TYPE_RCAR_GEN3,
 	},
 	{
+		.compatible = "renesas,usbhs-r8a77995",
+		.data = (void *)USBHS_TYPE_RCAR_GEN3_WITH_PLL,
+	},
+	{
 		.compatible = "renesas,rcar-gen2-usbhs",
 		.data = (void *)USBHS_TYPE_RCAR_GEN2,
 	},
@@ -501,7 +496,6 @@ static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev)
 {
 	struct renesas_usbhs_platform_info *info;
 	struct renesas_usbhs_driver_param *dparam;
-	const struct of_device_id *of_id = of_match_device(usbhs_of_match, dev);
 	u32 tmp;
 	int gpio;
 
@@ -510,7 +504,7 @@ static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev)
 		return NULL;
 
 	dparam = &info->driver_param;
-	dparam->type = of_id ? (uintptr_t)of_id->data : 0;
+	dparam->type = (uintptr_t)of_device_get_match_data(dev);
 	if (!of_property_read_u32(dev->of_node, "renesas,buswait", &tmp))
 		dparam->buswait_bwait = tmp;
 	gpio = of_get_named_gpio_flags(dev->of_node, "renesas,enable-gpio", 0,
@@ -519,15 +513,19 @@ static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev)
 		dparam->enable_gpio = gpio;
 
 	if (dparam->type == USBHS_TYPE_RCAR_GEN2 ||
-	    dparam->type == USBHS_TYPE_RCAR_GEN3)
+	    dparam->type == USBHS_TYPE_RCAR_GEN3 ||
+	    dparam->type == USBHS_TYPE_RCAR_GEN3_WITH_PLL) {
 		dparam->has_usb_dmac = 1;
+		dparam->pipe_configs = usbhsc_new_pipe;
+		dparam->pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
+	}
 
 	return info;
 }
 
 static int usbhs_probe(struct platform_device *pdev)
 {
-	struct renesas_usbhs_platform_info *info = dev_get_platdata(&pdev->dev);
+	struct renesas_usbhs_platform_info *info = renesas_usbhs_get_info(pdev);
 	struct renesas_usbhs_driver_callback *dfunc;
 	struct usbhs_priv *priv;
 	struct resource *res, *irq_res;
@@ -577,17 +575,12 @@ static int usbhs_probe(struct platform_device *pdev)
 	switch (priv->dparam.type) {
 	case USBHS_TYPE_RCAR_GEN2:
 		priv->pfunc = usbhs_rcar2_ops;
-		if (!priv->dparam.pipe_configs) {
-			priv->dparam.pipe_configs = usbhsc_new_pipe;
-			priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
-		}
 		break;
 	case USBHS_TYPE_RCAR_GEN3:
 		priv->pfunc = usbhs_rcar3_ops;
-		if (!priv->dparam.pipe_configs) {
-			priv->dparam.pipe_configs = usbhsc_new_pipe;
-			priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
-		}
+		break;
+	case USBHS_TYPE_RCAR_GEN3_WITH_PLL:
+		priv->pfunc = usbhs_rcar3_with_pll_ops;
 		break;
 	default:
 		if (!info->platform_callback.get_id) {
@@ -710,7 +703,7 @@ probe_end_pipe_exit:
 static int usbhs_remove(struct platform_device *pdev)
 {
 	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
-	struct renesas_usbhs_platform_info *info = dev_get_platdata(&pdev->dev);
+	struct renesas_usbhs_platform_info *info = renesas_usbhs_get_info(pdev);
 	struct renesas_usbhs_driver_callback *dfunc = &info->driver_callback;
 
 	dev_dbg(&pdev->dev, "usb remove\n");
diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h
index 8c5fc12ad778..64797784a6df 100644
--- a/drivers/usb/renesas_usbhs/common.h
+++ b/drivers/usb/renesas_usbhs/common.h
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * Renesas USB driver
  *
  * Copyright (C) 2011 Renesas Solutions Corp.
  * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 #ifndef RENESAS_USB_DRIVER_H
 #define RENESAS_USB_DRIVER_H
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index 50285b01da92..2d24ef3076ef 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * Renesas USB driver
  *
  * Copyright (C) 2011 Renesas Solutions Corp.
  * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 #include <linux/delay.h>
 #include <linux/io.h>
diff --git a/drivers/usb/renesas_usbhs/fifo.h b/drivers/usb/renesas_usbhs/fifo.h
index 8b98507d7abc..88d1816bcda2 100644
--- a/drivers/usb/renesas_usbhs/fifo.h
+++ b/drivers/usb/renesas_usbhs/fifo.h
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * Renesas USB driver
  *
  * Copyright (C) 2011 Renesas Solutions Corp.
  * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 #ifndef RENESAS_USB_FIFO_H
 #define RENESAS_USB_FIFO_H
diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c
index 28965ef4f824..7475c4f64724 100644
--- a/drivers/usb/renesas_usbhs/mod.c
+++ b/drivers/usb/renesas_usbhs/mod.c
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * Renesas USB driver
  *
  * Copyright (C) 2011 Renesas Solutions Corp.
  * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 #include <linux/interrupt.h>
 
diff --git a/drivers/usb/renesas_usbhs/mod.h b/drivers/usb/renesas_usbhs/mod.h
index 1ef5bf604070..a4a61d6b82a1 100644
--- a/drivers/usb/renesas_usbhs/mod.h
+++ b/drivers/usb/renesas_usbhs/mod.h
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * Renesas USB driver
  *
  * Copyright (C) 2011 Renesas Solutions Corp.
  * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 #ifndef RENESAS_USB_MOD_H
 #define RENESAS_USB_MOD_H
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index c068b673420b..34ee9ebe12a3 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * Renesas USB driver
  *
  * Copyright (C) 2011 Renesas Solutions Corp.
  * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index e256351cb72d..4e59c649db81 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * Renesas USB driver
  *
  * Copyright (C) 2011 Renesas Solutions Corp.
  * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 #include <linux/io.h>
 #include <linux/list.h>
diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c
index d811f0550c04..093cd8e87335 100644
--- a/drivers/usb/renesas_usbhs/pipe.c
+++ b/drivers/usb/renesas_usbhs/pipe.c
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * Renesas USB driver
  *
  * Copyright (C) 2011 Renesas Solutions Corp.
  * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 #include <linux/delay.h>
 #include <linux/slab.h>
diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h
index 95185fdb29b1..d3d002244891 100644
--- a/drivers/usb/renesas_usbhs/pipe.h
+++ b/drivers/usb/renesas_usbhs/pipe.h
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * Renesas USB driver
  *
  * Copyright (C) 2011 Renesas Solutions Corp.
  * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
  */
 #ifndef RENESAS_USB_PIPE_H
 #define RENESAS_USB_PIPE_H
diff --git a/drivers/usb/renesas_usbhs/rcar2.c b/drivers/usb/renesas_usbhs/rcar2.c
index 277160bc6f25..85a0e0933917 100644
--- a/drivers/usb/renesas_usbhs/rcar2.c
+++ b/drivers/usb/renesas_usbhs/rcar2.c
@@ -1,13 +1,8 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * Renesas USB driver R-Car Gen. 2 initialization and power control
  *
  * Copyright (C) 2014 Ulrich Hecht
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <linux/gpio.h>
diff --git a/drivers/usb/renesas_usbhs/rcar2.h b/drivers/usb/renesas_usbhs/rcar2.h
index f07f10d9b3b2..45e3526cedeb 100644
--- a/drivers/usb/renesas_usbhs/rcar2.h
+++ b/drivers/usb/renesas_usbhs/rcar2.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include "common.h"
 
 extern const struct renesas_usbhs_platform_callback
diff --git a/drivers/usb/renesas_usbhs/rcar3.c b/drivers/usb/renesas_usbhs/rcar3.c
index 02b67abfc2a1..c929d296c77b 100644
--- a/drivers/usb/renesas_usbhs/rcar3.c
+++ b/drivers/usb/renesas_usbhs/rcar3.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Renesas USB driver R-Car Gen. 3 initialization and power control
  *
  * Copyright (C) 2016 Renesas Electronics Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <linux/delay.h>
@@ -15,24 +11,39 @@
 #include "rcar3.h"
 
 #define LPSTS		0x102
+#define UGCTRL		0x180	/* 32-bit register */
 #define UGCTRL2		0x184	/* 32-bit register */
+#define UGSTS		0x188	/* 32-bit register */
 
 /* Low Power Status register (LPSTS) */
 #define LPSTS_SUSPM	0x4000
 
+/* R-Car D3 only: USB General control register (UGCTRL) */
+#define UGCTRL_PLLRESET		0x00000001
+#define UGCTRL_CONNECT		0x00000004
+
 /*
  * USB General control register 2 (UGCTRL2)
  * Remarks: bit[31:11] and bit[9:6] should be 0
  */
 #define UGCTRL2_RESERVED_3	0x00000001	/* bit[3:0] should be B'0001 */
+#define UGCTRL2_USB0SEL_HSUSB	0x00000020
 #define UGCTRL2_USB0SEL_OTG	0x00000030
 #define UGCTRL2_VBUSSEL		0x00000400
 
+/* R-Car D3 only: USB General status register (UGSTS) */
+#define UGSTS_LOCK		0x00000100
+
 static void usbhs_write32(struct usbhs_priv *priv, u32 reg, u32 data)
 {
 	iowrite32(data, priv->base + reg);
 }
 
+static u32 usbhs_read32(struct usbhs_priv *priv, u32 reg)
+{
+	return ioread32(priv->base + reg);
+}
+
 static int usbhs_rcar3_power_ctrl(struct platform_device *pdev,
 				void __iomem *base, int enable)
 {
@@ -52,6 +63,34 @@ static int usbhs_rcar3_power_ctrl(struct platform_device *pdev,
 	return 0;
 }
 
+/* R-Car D3 needs to release UGCTRL.PLLRESET */
+static int usbhs_rcar3_power_and_pll_ctrl(struct platform_device *pdev,
+					  void __iomem *base, int enable)
+{
+	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
+	u32 val;
+	int timeout = 1000;
+
+	if (enable) {
+		usbhs_write32(priv, UGCTRL, 0);	/* release PLLRESET */
+		usbhs_write32(priv, UGCTRL2, UGCTRL2_RESERVED_3 |
+			      UGCTRL2_USB0SEL_HSUSB);
+
+		usbhs_bset(priv, LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
+		do {
+			val = usbhs_read32(priv, UGSTS);
+			udelay(1);
+		} while (!(val & UGSTS_LOCK) && timeout--);
+		usbhs_write32(priv, UGCTRL, UGCTRL_CONNECT);
+	} else {
+		usbhs_write32(priv, UGCTRL, 0);
+		usbhs_bset(priv, LPSTS, LPSTS_SUSPM, 0);
+		usbhs_write32(priv, UGCTRL, UGCTRL_PLLRESET);
+	}
+
+	return 0;
+}
+
 static int usbhs_rcar3_get_id(struct platform_device *pdev)
 {
 	return USBHS_GADGET;
@@ -61,3 +100,8 @@ const struct renesas_usbhs_platform_callback usbhs_rcar3_ops = {
 	.power_ctrl = usbhs_rcar3_power_ctrl,
 	.get_id = usbhs_rcar3_get_id,
 };
+
+const struct renesas_usbhs_platform_callback usbhs_rcar3_with_pll_ops = {
+	.power_ctrl = usbhs_rcar3_power_and_pll_ctrl,
+	.get_id = usbhs_rcar3_get_id,
+};
diff --git a/drivers/usb/renesas_usbhs/rcar3.h b/drivers/usb/renesas_usbhs/rcar3.h
index 5f850b23ff18..49e535a31771 100644
--- a/drivers/usb/renesas_usbhs/rcar3.h
+++ b/drivers/usb/renesas_usbhs/rcar3.h
@@ -1,3 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0
 #include "common.h"
 
 extern const struct renesas_usbhs_platform_callback usbhs_rcar3_ops;
+extern const struct renesas_usbhs_platform_callback usbhs_rcar3_with_pll_ops;
diff --git a/drivers/usb/serial/Makefile-keyspan_pda_fw b/drivers/usb/serial/Makefile-keyspan_pda_fw
index c20baf728011..503b472d85f2 100644
--- a/drivers/usb/serial/Makefile-keyspan_pda_fw
+++ b/drivers/usb/serial/Makefile-keyspan_pda_fw
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 
 # some rules to handle the quirks of the 'as31' assembler, like
 # insisting upon fixed suffixes for the input and output files,
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 569c2200ba42..84d52953dd0a 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * AIRcable USB Bluetooth Dongle Driver.
  *
  * Copyright (C) 2010 Johan Hovold <jhovold@gmail.com>
  * Copyright (C) 2006 Manuel Francisco Naranjo (naranjo.manuel@gmail.com)
  *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- *
  * The device works as an standard CDC device, it has 2 interfaces, the first
  * one is for firmware access and the second is the serial one.
  * The protocol is very simply, there are two possibilities reading or writing.
@@ -161,4 +158,4 @@ module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 0adbd38b4eea..3c544782f60b 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2009 by Bart Hartgers (bart.hartgers+ark3116@gmail.com)
  * Original version:
@@ -15,11 +16,6 @@
  * into the old ark3116.c driver and suddenly realized the ark3116 is
  * a 16450 with a USB interface glued to it. See comments at the
  * bottom of this file.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 15bc71853db5..c1235d5b9fba 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Belkin USB Serial Adapter Driver
  *
@@ -9,11 +10,6 @@
  *  and associated source files.  Please see the usb/serial files for
  *  individual credits and copyrights.
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
  *
diff --git a/drivers/usb/serial/belkin_sa.h b/drivers/usb/serial/belkin_sa.h
index c74b58ab56f9..51bc06287603 100644
--- a/drivers/usb/serial/belkin_sa.h
+++ b/drivers/usb/serial/belkin_sa.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Definitions for Belkin USB Serial Adapter Driver
  *
@@ -8,11 +9,6 @@
  *  and associated source files.  Please see the usb/serial files for
  *  individual credits and copyrights.
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
  *
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index 8936a83c96cd..9e265eb92611 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB Serial Converter Bus specific functions
  *
  * Copyright (C) 2002 Greg Kroah-Hartman (greg@kroah.com)
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License version
- *	2 as published by the Free Software Foundation.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 351745aec0e1..bdd7a5ad3bf1 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright 2007, Frank A Kingswood <frank@kingswood-consulting.co.uk>
  * Copyright 2007, Werner Cornelius <werner@cornelius-consult.de>
@@ -9,10 +10,6 @@
  * serial port, an IEEE-1284 parallel printer port or a memory-like
  * interface. In all cases the CH341 supports an I2C interface as well.
  * This driver only supports the asynchronous serial interface.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
  */
 
 #include <linux/kernel.h>
@@ -644,4 +641,4 @@ static struct usb_serial_driver * const serial_drivers[] = {
 
 module_usb_serial_driver(serial_drivers, id_table);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 43a862a90a77..17940589c647 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB Serial Console driver
  *
  * Copyright (C) 2001 - 2002 Greg Kroah-Hartman (greg@kroah.com)
  *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License version
- *	2 as published by the Free Software Foundation.
- *
  * Thanks to Randy Dunlap for the original version of this code.
  *
  */
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 412f812522ee..7c6273bf5beb 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Silicon Laboratories CP210x USB to RS232 serial adaptor driver
  *
  * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk)
  *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License version
- *	2 as published by the Free Software Foundation.
- *
  * Support to set flow control line levels using TIOCMGET and TIOCMSET
  * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
  * control thanks to Munir Nassar nassarmu@real-time.com
@@ -1529,4 +1526,4 @@ static void cp210x_release(struct usb_serial *serial)
 module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 47fbd9f0c0c7..dc67a2eb98d7 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *  REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
  *
@@ -10,11 +11,6 @@
  *  and associated source files.  Please see the usb/serial files for
  *  individual credits and copyrights.
  *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
  *  Thanks to Greg Kroah-Hartman (greg@kroah.com) for his help and
  *  patience.
  *
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 90110de715e0..e0035c023120 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * USB Cypress M8 driver
  *
@@ -6,11 +7,6 @@
  *	Copyright (C) 2003,2004
  *	    Neil Whelchel (koyama@firstlight.net)
  *
- * 	This program is free software; you can redistribute it and/or modify
- * 	it under the terms of the GNU General Public License as published by
- * 	the Free Software Foundation; either version 2 of the License, or
- * 	(at your option) any later version.
- *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
  *
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 2ce39af32cfa..b0526786fb02 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
 *  Digi AccelePort USB-4 and USB-2 Serial Converters
 *
 *  Copyright 2000 by Digi International
 *
-*  This program is free software; you can redistribute it and/or modify
-*  it under the terms of the GNU General Public License as published by
-*  the Free Software Foundation; either version 2 of the License, or
-*  (at your option) any later version.
-*
 *  Shamelessly based on Brian Warner's keyspan_pda.c and Greg Kroah-Hartman's
 *  usb-serial driver.
 *
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 90e603d5f660..d680bec62547 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB Empeg empeg-car player driver
  *
@@ -7,10 +8,6 @@
  *	Copyright (C) 1999 - 2001
  *	    Greg Kroah-Hartman (greg@kroah.com)
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License, as published by
- *	the Free Software Foundation, version 2.
- *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
  */
@@ -126,4 +123,4 @@ module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 972f5a5fe577..96036f87b1de 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Fintek F81232 USB to serial adaptor driver
  *
  * Copyright (C) 2012 Greg Kroah-Hartman (gregkh@linuxfoundation.org)
  * Copyright (C) 2012 Linux Foundation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c
index 3d616a2a9f96..e4573b4c8935 100644
--- a/drivers/usb/serial/f81534.c
+++ b/drivers/usb/serial/f81534.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * F81532/F81534 USB to Serial Ports Bridge
  *
  * F81532 => 2 Serial Ports
  * F81534 => 4 Serial Ports
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
  * Copyright (C) 2016 Feature Integration Technology Inc., (Fintek)
  * Copyright (C) 2016 Tom Tsai (Tom_Tsai@fintek.com.tw)
  * Copyright (C) 2016 Peter Hong (Peter_Hong@fintek.com.tw)
@@ -39,9 +35,11 @@
 #define F81534_UART_OFFSET		0x10
 #define F81534_DIVISOR_LSB_REG		(0x00 + F81534_UART_BASE_ADDRESS)
 #define F81534_DIVISOR_MSB_REG		(0x01 + F81534_UART_BASE_ADDRESS)
+#define F81534_INTERRUPT_ENABLE_REG	(0x01 + F81534_UART_BASE_ADDRESS)
 #define F81534_FIFO_CONTROL_REG		(0x02 + F81534_UART_BASE_ADDRESS)
 #define F81534_LINE_CONTROL_REG		(0x03 + F81534_UART_BASE_ADDRESS)
 #define F81534_MODEM_CONTROL_REG	(0x04 + F81534_UART_BASE_ADDRESS)
+#define F81534_LINE_STATUS_REG		(0x05 + F81534_UART_BASE_ADDRESS)
 #define F81534_MODEM_STATUS_REG		(0x06 + F81534_UART_BASE_ADDRESS)
 #define F81534_CONFIG1_REG		(0x09 + F81534_UART_BASE_ADDRESS)
 
@@ -126,9 +124,13 @@ struct f81534_serial_private {
 
 struct f81534_port_private {
 	struct mutex mcr_mutex;
+	struct mutex lcr_mutex;
+	struct work_struct lsr_work;
+	struct usb_serial_port *port;
 	unsigned long tx_empty;
 	spinlock_t msr_lock;
 	u8 shadow_mcr;
+	u8 shadow_lcr;
 	u8 shadow_msr;
 	u8 phy_num;
 };
@@ -461,6 +463,7 @@ static u32 f81534_calc_baud_divisor(u32 baudrate, u32 clockrate)
 static int f81534_set_port_config(struct usb_serial_port *port, u32 baudrate,
 					u8 lcr)
 {
+	struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
 	u32 divisor;
 	int status;
 	u8 value;
@@ -489,35 +492,65 @@ static int f81534_set_port_config(struct usb_serial_port *port, u32 baudrate,
 	}
 
 	divisor = f81534_calc_baud_divisor(baudrate, F81534_MAX_BAUDRATE);
+
+	mutex_lock(&port_priv->lcr_mutex);
+
 	value = UART_LCR_DLAB;
 	status = f81534_set_port_register(port, F81534_LINE_CONTROL_REG,
 						value);
 	if (status) {
 		dev_err(&port->dev, "%s: set LCR failed\n", __func__);
-		return status;
+		goto out_unlock;
 	}
 
 	value = divisor & 0xff;
 	status = f81534_set_port_register(port, F81534_DIVISOR_LSB_REG, value);
 	if (status) {
 		dev_err(&port->dev, "%s: set DLAB LSB failed\n", __func__);
-		return status;
+		goto out_unlock;
 	}
 
 	value = (divisor >> 8) & 0xff;
 	status = f81534_set_port_register(port, F81534_DIVISOR_MSB_REG, value);
 	if (status) {
 		dev_err(&port->dev, "%s: set DLAB MSB failed\n", __func__);
-		return status;
+		goto out_unlock;
 	}
 
-	status = f81534_set_port_register(port, F81534_LINE_CONTROL_REG, lcr);
+	value = lcr | (port_priv->shadow_lcr & UART_LCR_SBC);
+	status = f81534_set_port_register(port, F81534_LINE_CONTROL_REG,
+						value);
 	if (status) {
 		dev_err(&port->dev, "%s: set LCR failed\n", __func__);
-		return status;
+		goto out_unlock;
 	}
 
-	return 0;
+	port_priv->shadow_lcr = value;
+out_unlock:
+	mutex_unlock(&port_priv->lcr_mutex);
+
+	return status;
+}
+
+static void f81534_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+	int status;
+
+	mutex_lock(&port_priv->lcr_mutex);
+
+	if (break_state)
+		port_priv->shadow_lcr |= UART_LCR_SBC;
+	else
+		port_priv->shadow_lcr &= ~UART_LCR_SBC;
+
+	status = f81534_set_port_register(port, F81534_LINE_CONTROL_REG,
+					port_priv->shadow_lcr);
+	if (status)
+		dev_err(&port->dev, "set break failed: %d\n", status);
+
+	mutex_unlock(&port_priv->lcr_mutex);
 }
 
 static int f81534_update_mctrl(struct usb_serial_port *port, unsigned int set,
@@ -1015,6 +1048,8 @@ static void f81534_process_per_serial_block(struct usb_serial_port *port,
 				tty_insert_flip_char(&port->port, 0,
 						TTY_OVERRUN);
 			}
+
+			schedule_work(&port_priv->lsr_work);
 		}
 
 		if (port->port.console && port->sysrq) {
@@ -1162,6 +1197,21 @@ static int f81534_attach(struct usb_serial *serial)
 	return 0;
 }
 
+static void f81534_lsr_worker(struct work_struct *work)
+{
+	struct f81534_port_private *port_priv;
+	struct usb_serial_port *port;
+	int status;
+	u8 tmp;
+
+	port_priv = container_of(work, struct f81534_port_private, lsr_work);
+	port = port_priv->port;
+
+	status = f81534_get_port_register(port, F81534_LINE_STATUS_REG, &tmp);
+	if (status)
+		dev_warn(&port->dev, "read LSR failed: %d\n", status);
+}
+
 static int f81534_port_probe(struct usb_serial_port *port)
 {
 	struct f81534_port_private *port_priv;
@@ -1173,6 +1223,8 @@ static int f81534_port_probe(struct usb_serial_port *port)
 
 	spin_lock_init(&port_priv->msr_lock);
 	mutex_init(&port_priv->mcr_mutex);
+	mutex_init(&port_priv->lcr_mutex);
+	INIT_WORK(&port_priv->lsr_work, f81534_lsr_worker);
 
 	/* Assign logic-to-phy mapping */
 	ret = f81534_logic_to_phy_port(port->serial, port);
@@ -1180,10 +1232,30 @@ static int f81534_port_probe(struct usb_serial_port *port)
 		return ret;
 
 	port_priv->phy_num = ret;
+	port_priv->port = port;
 	usb_set_serial_port_data(port, port_priv);
 	dev_dbg(&port->dev, "%s: port_number: %d, phy_num: %d\n", __func__,
 			port->port_number, port_priv->phy_num);
 
+	/*
+	 * The F81532/534 will hang-up when enable LSR interrupt in IER and
+	 * occur data overrun. So we'll disable the LSR interrupt in probe()
+	 * and submit the LSR worker to clear LSR state when reported LSR error
+	 * bit with bulk-in data in f81534_process_per_serial_block().
+	 */
+	ret = f81534_set_port_register(port, F81534_INTERRUPT_ENABLE_REG,
+			UART_IER_RDI | UART_IER_THRI | UART_IER_MSI);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int f81534_port_remove(struct usb_serial_port *port)
+{
+	struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+
+	flush_work(&port_priv->lsr_work);
 	return 0;
 }
 
@@ -1317,6 +1389,8 @@ static struct usb_serial_driver f81534_device = {
 	.calc_num_ports =	f81534_calc_num_ports,
 	.attach =		f81534_attach,
 	.port_probe =		f81534_port_probe,
+	.port_remove =		f81534_port_remove,
+	.break_ctl =		f81534_break_ctl,
 	.dtr_rts =		f81534_dtr_rts,
 	.process_read_urb =	f81534_process_read_urb,
 	.ioctl =		f81534_ioctl,
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 49d1b2d4606d..1aba9105b369 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * USB FTDI SIO driver
  *
@@ -9,11 +10,6 @@
  *	Copyright (C) 2002
  *	    Kuba Ober (kuba@mareimbrium.org)
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
  *
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index b2f2e87aed94..633550ec3025 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Garmin GPS driver
  *
@@ -7,20 +8,6 @@
  * http://sourceforge.net/projects/garmin-gps/
  *
  * This driver has been derived from v2.1 of the visor driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111 USA
  */
 
 #include <linux/kernel.h>
@@ -138,6 +125,7 @@ struct garmin_data {
 	__u8   privpkt[4*6];
 	spinlock_t lock;
 	struct list_head pktlist;
+	struct usb_anchor write_urbs;
 };
 
 
@@ -875,42 +863,38 @@ static int garmin_clear(struct garmin_data *garmin_data_p)
 
 static int garmin_init_session(struct usb_serial_port *port)
 {
-	struct usb_serial *serial = port->serial;
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
-	int status = 0;
-	int i = 0;
+	int status;
+	int i;
 
-	if (status == 0) {
-		usb_kill_urb(port->interrupt_in_urb);
+	usb_kill_urb(port->interrupt_in_urb);
 
-		dev_dbg(&serial->dev->dev, "%s - adding interrupt input\n", __func__);
-		status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
-		if (status)
-			dev_err(&serial->dev->dev,
-			  "%s - failed submitting interrupt urb, error %d\n",
-							__func__, status);
+	status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+	if (status) {
+		dev_err(&port->dev, "failed to submit interrupt urb: %d\n",
+				status);
+		return status;
 	}
 
 	/*
 	 * using the initialization method from gpsbabel. See comments in
 	 * gpsbabel/jeeps/gpslibusb.c gusb_reset_toggles()
 	 */
-	if (status == 0) {
-		dev_dbg(&serial->dev->dev, "%s - starting session ...\n", __func__);
-		garmin_data_p->state = STATE_ACTIVE;
+	dev_dbg(&port->dev, "%s - starting session ...\n", __func__);
+	garmin_data_p->state = STATE_ACTIVE;
 
-		for (i = 0; i < 3; i++) {
-			status = garmin_write_bulk(port,
-					GARMIN_START_SESSION_REQ,
-					sizeof(GARMIN_START_SESSION_REQ), 0);
+	for (i = 0; i < 3; i++) {
+		status = garmin_write_bulk(port, GARMIN_START_SESSION_REQ,
+				sizeof(GARMIN_START_SESSION_REQ), 0);
+		if (status < 0)
+			goto err_kill_urbs;
+	}
 
-			if (status < 0)
-				break;
-		}
+	return 0;
 
-		if (status > 0)
-			status = 0;
-	}
+err_kill_urbs:
+	usb_kill_anchored_urbs(&garmin_data_p->write_urbs);
+	usb_kill_urb(port->interrupt_in_urb);
 
 	return status;
 }
@@ -930,7 +914,6 @@ static int garmin_open(struct tty_struct *tty, struct usb_serial_port *port)
 	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 
 	/* shutdown any bulk reads that might be going on */
-	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 
 	if (garmin_data_p->state == STATE_RESET)
@@ -953,7 +936,7 @@ static void garmin_close(struct usb_serial_port *port)
 
 	/* shutdown our urbs */
 	usb_kill_urb(port->read_urb);
-	usb_kill_urb(port->write_urb);
+	usb_kill_anchored_urbs(&garmin_data_p->write_urbs);
 
 	/* keep reset state so we know that we must start a new session */
 	if (garmin_data_p->state != STATE_RESET)
@@ -1037,12 +1020,14 @@ static int garmin_write_bulk(struct usb_serial_port *port,
 	}
 
 	/* send it down the pipe */
+	usb_anchor_urb(urb, &garmin_data_p->write_urbs);
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
 		dev_err(&port->dev,
 		   "%s - usb_submit_urb(write bulk) failed with status = %d\n",
 				__func__, status);
 		count = status;
+		usb_unanchor_urb(urb);
 		kfree(buffer);
 	}
 
@@ -1370,9 +1355,9 @@ static void garmin_unthrottle(struct tty_struct *tty)
  * the tty in cases where the protocol provides no own handshaking
  * to initiate the transfer.
  */
-static void timeout_handler(unsigned long data)
+static void timeout_handler(struct timer_list *t)
 {
-	struct garmin_data *garmin_data_p = (struct garmin_data *) data;
+	struct garmin_data *garmin_data_p = from_timer(garmin_data_p, t, timer);
 
 	/* send the next queued packet to the tty port */
 	if (garmin_data_p->mode == MODE_NATIVE)
@@ -1391,19 +1376,23 @@ static int garmin_port_probe(struct usb_serial_port *port)
 	if (!garmin_data_p)
 		return -ENOMEM;
 
-	init_timer(&garmin_data_p->timer);
+	timer_setup(&garmin_data_p->timer, timeout_handler, 0);
 	spin_lock_init(&garmin_data_p->lock);
 	INIT_LIST_HEAD(&garmin_data_p->pktlist);
-	/* garmin_data_p->timer.expires = jiffies + session_timeout; */
-	garmin_data_p->timer.data = (unsigned long)garmin_data_p;
-	garmin_data_p->timer.function = timeout_handler;
 	garmin_data_p->port = port;
 	garmin_data_p->state = 0;
 	garmin_data_p->flags = 0;
 	garmin_data_p->count = 0;
+	init_usb_anchor(&garmin_data_p->write_urbs);
 	usb_set_serial_port_data(port, garmin_data_p);
 
 	status = garmin_init_session(port);
+	if (status)
+		goto err_free;
+
+	return 0;
+err_free:
+	kfree(garmin_data_p);
 
 	return status;
 }
@@ -1413,6 +1402,7 @@ static int garmin_port_remove(struct usb_serial_port *port)
 {
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 
+	usb_kill_anchored_urbs(&garmin_data_p->write_urbs);
 	usb_kill_urb(port->interrupt_in_urb);
 	del_timer_sync(&garmin_data_p->timer);
 	kfree(garmin_data_p);
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 35cb8c0e584f..2274d9625f63 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB Serial Converter Generic functions
  *
  * Copyright (C) 2010 - 2013 Johan Hovold (jhovold@gmail.com)
  * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License version
- *	2 as published by the Free Software Foundation.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/serial/io_16654.h b/drivers/usb/serial/io_16654.h
index a53abc9530ff..4980f72dc56f 100644
--- a/drivers/usb/serial/io_16654.h
+++ b/drivers/usb/serial/io_16654.h
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /************************************************************************
  *
  *	16654.H		Definitions for 16C654 UART used on EdgePorts
  *
  *	Copyright (C) 1998 Inside Out Networks, Inc.
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
  *
  ************************************************************************/
 
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index bdf8bd814a9a..219265ce3711 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Edgeport USB Serial Converter driver
  *
  * Copyright (C) 2000 Inside Out Networks, All rights reserved.
  * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com>
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
  * Supports the following devices:
  *	Edgeport/4
  *	Edgeport/4t
diff --git a/drivers/usb/serial/io_edgeport.h b/drivers/usb/serial/io_edgeport.h
index ad9c1d47a619..2e7fedbaf2ff 100644
--- a/drivers/usb/serial/io_edgeport.h
+++ b/drivers/usb/serial/io_edgeport.h
@@ -1,15 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /************************************************************************
  *
  *	io_edgeport.h	Edgeport Linux Interface definitions
  *
  *	Copyright (C) 2000 Inside Out Networks, Inc.
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *
  ************************************************************************/
 
 #if !defined(_IO_EDGEPORT_H_)
diff --git a/drivers/usb/serial/io_ionsp.h b/drivers/usb/serial/io_ionsp.h
index 5cc591bae54d..4b8e4823bd45 100644
--- a/drivers/usb/serial/io_ionsp.h
+++ b/drivers/usb/serial/io_ionsp.h
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /************************************************************************
  *
  *	IONSP.H		Definitions for I/O Networks Serial Protocol
  *
  *	Copyright (C) 1997-1998 Inside Out Networks, Inc.
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
  *	These definitions are used by both kernel-mode driver and the
  *	peripheral firmware and MUST be kept in sync.
  *
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 6cefb9cb133d..0fbadb37c104 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Edgeport USB Serial Converter driver
  *
  * Copyright (C) 2000-2002 Inside Out Networks, All rights reserved.
  * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com>
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
  * Supports the following devices:
  *	EP/1 EP/2 EP/4 EP/21 EP/22 EP/221 EP/42 EP/421 WATCHPORT
  *
diff --git a/drivers/usb/serial/io_ti.h b/drivers/usb/serial/io_ti.h
index 1bd67b24f916..e53c68261017 100644
--- a/drivers/usb/serial/io_ti.h
+++ b/drivers/usb/serial/io_ti.h
@@ -1,13 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*****************************************************************************
  *
  *	Copyright (C) 1997-2002 Inside Out Networks, Inc.
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *
  *	Feb-16-2001	DMI	Added I2C structure definitions
  *	May-29-2002	gkh	Ported to Linux
  *
diff --git a/drivers/usb/serial/io_usbvend.h b/drivers/usb/serial/io_usbvend.h
index 6f6a856bc37c..c38e87ac5ea9 100644
--- a/drivers/usb/serial/io_usbvend.h
+++ b/drivers/usb/serial/io_usbvend.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /************************************************************************
  *
  *	USBVEND.H		Vendor-specific USB definitions
@@ -8,10 +9,6 @@
  ************************************************************************
  *
  *	Copyright (C) 1998 Inside Out Networks, Inc.
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
  *
  ************************************************************************/
 
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index cde0dcdce9c4..f81746c3c26c 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * USB Compaq iPAQ driver
  *
  *	Copyright (C) 2001 - 2002
  *	    Ganesh Varadarajan <ganesh@veritas.com>
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 8b1cf18a668b..d04c7cc5c1c2 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * IPWireless 3G UMTS TDD Modem driver (USB connected)
  *
  *   Copyright (C) 2004 Roelf Diedericks <roelfd@inet.co.za>
  *   Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
  *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
  * All information about the device was acquired using SnoopyPro
  * on MSFT's O/S, and examing the MSFT drivers' debug output
  * (insanely left _on_ in the enduser version)
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index f9734a96d516..24b06c7e5e2d 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * USB IR Dongle driver
  *
@@ -5,11 +6,6 @@
  *	Copyright (C) 2002	Gary Brubaker (xavyer@ix.netcom.com)
  *	Copyright (C) 2010	Johan Hovold (jhovold@gmail.com)
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
  * This driver allows a USB IrDA device to be used as a "dumb" serial device.
  * This can be useful if you do not have access to a full IrDA stack on the
  * other side of the connection.  If you do have an IrDA stack on both devices,
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 18fc992a245f..397a8012ffa3 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Infinity Unlimited USB Phoenix driver
  *
@@ -7,13 +8,7 @@
  *
  * Original code taken from iuutool (Copyright (C) 2006 Juan Carlos Borrás)
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
  *  And tested with help of WB Electronics
- *
  */
 #include <linux/kernel.h>
 #include <linux/errno.h>
diff --git a/drivers/usb/serial/iuu_phoenix.h b/drivers/usb/serial/iuu_phoenix.h
index b82630a3b8fd..b400b262f72e 100644
--- a/drivers/usb/serial/iuu_phoenix.h
+++ b/drivers/usb/serial/iuu_phoenix.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Infinity Unlimited USB Phoenix driver
  *
@@ -6,13 +7,7 @@
  *
  * Original code taken from iuutool ( Copyright (C) 2006 Juan Carlos Borrás )
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
  *  And tested with help of WB Electronics
- *
  */
 
 #define   IUU_USB_VENDOR_ID  0x104f
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 5662d324edd2..d34779fe4a8d 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
   Keyspan USB to Serial Converter driver
 
   (C) Copyright (C) 2000-2001	Hugh Blemings <hugh@blemings.org>
   (C) Copyright (C) 2002	Greg Kroah-Hartman <greg@kroah.com>
 
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation; either version 2 of the License, or
-  (at your option) any later version.
-
   See http://blemings.org/hugh/keyspan.html for more information.
 
   Code in this driver inspired by and in a number of places taken
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 196908dd25a1..5169624d8b11 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * USB Keyspan PDA / Xircom / Entrega Converter driver
  *
@@ -5,11 +6,6 @@
  * Copyright (C) 1999, 2000 Brian Warner	<warner@lothar.com>
  * Copyright (C) 2000 Al Borchers		<borchers@steinerpoint.com>
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
  */
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 595415e59d5d..5046ffd53cde 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * KLSI KL5KUSB105 chip RS232 converter driver
  *
  *   Copyright (C) 2010 Johan Hovold <jhovold@gmail.com>
  *   Copyright (C) 2001 Utz-Uwe Haus <haus@uuhaus.de>
  *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
  * All information about the device was acquired using SniffUSB ans snoopUSB
  * on Windows98.
  * It was written out of frustration with the PalmConnect USB Serial adapter
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 3024b9b25360..a31ea7e194dd 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *  KOBIL USB Smart Card Terminal Driver
  *
@@ -10,11 +11,6 @@
  *  and associated source files.  Please see the usb/serial files for
  *  individual credits and copyrights.
  *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
  *  Thanks to Greg Kroah-Hartman (greg@kroah.com) for his help and
  *  patience.
  *
@@ -491,6 +487,7 @@ static void kobil_set_termios(struct tty_struct *tty,
 		break;
 	default:
 		speed = 9600;
+		/* fall through */
 	case 9600:
 		urb_val = SUSBCR_SBR_9600;
 		break;
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 70f346f1aa86..7887c312d9a9 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * MCT (Magic Control Technology Corp.) USB RS232 Converter Driver
  *
  *   Copyright (C) 2000 Wolfgang Grandegger (wolfgang@ces.ch)
  *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
  * This program is largely derived from the Belkin USB Serial Adapter Driver
  * (see belkin_sa.[ch]). All of the information about the device was acquired
  * by using SniffUSB on Windows98. For technical details see mct_u232.h.
diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
index d325bb8cb583..0084edf518e8 100644
--- a/drivers/usb/serial/mct_u232.h
+++ b/drivers/usb/serial/mct_u232.h
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Definitions for MCT (Magic Control Technology) USB-RS232 Converter Driver
  *
  *   Copyright (C) 2000 Wolfgang Grandegger (wolfgang@ces.ch)
  *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
  * This driver is for the device MCT USB-RS232 Converter (25 pin, Model No.
  * U232-P25) from Magic Control Technology Corp. (there is also a 9 pin
  * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html 
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index 14511d6a7d44..e63cea02cfd8 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
   Some of this code is credited to Linux USB open source files that are
   distributed with Linux.
@@ -54,21 +55,33 @@ MODULE_DEVICE_TABLE(usb, id_table);
 #define UNI_CMD_OPEN	0x80
 #define UNI_CMD_CLOSE	0xFF
 
-static inline int metrousb_is_unidirectional_mode(struct usb_serial_port *port)
+static int metrousb_is_unidirectional_mode(struct usb_serial *serial)
 {
-	__u16 product_id = le16_to_cpu(
-		port->serial->dev->descriptor.idProduct);
+	u16 product_id = le16_to_cpu(serial->dev->descriptor.idProduct);
 
 	return product_id == FOCUS_PRODUCT_ID_UNI;
 }
 
+static int metrousb_calc_num_ports(struct usb_serial *serial,
+				   struct usb_serial_endpoints *epds)
+{
+	if (metrousb_is_unidirectional_mode(serial)) {
+		if (epds->num_interrupt_out == 0) {
+			dev_err(&serial->interface->dev, "interrupt-out endpoint missing\n");
+			return -ENODEV;
+		}
+	}
+
+	return 1;
+}
+
 static int metrousb_send_unidirectional_cmd(u8 cmd, struct usb_serial_port *port)
 {
 	int ret;
 	int actual_len;
 	u8 *buffer_cmd = NULL;
 
-	if (!metrousb_is_unidirectional_mode(port))
+	if (!metrousb_is_unidirectional_mode(port->serial))
 		return 0;
 
 	buffer_cmd = kzalloc(sizeof(cmd), GFP_KERNEL);
@@ -161,13 +174,6 @@ static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
 	unsigned long flags = 0;
 	int result = 0;
 
-	/* Make sure the urb is initialized. */
-	if (!port->interrupt_in_urb) {
-		dev_err(&port->dev, "%s - interrupt urb not initialized\n",
-			__func__);
-		return -ENODEV;
-	}
-
 	/* Set the private data information for the port. */
 	spin_lock_irqsave(&metro_priv->lock, flags);
 	metro_priv->control_state = 0;
@@ -189,7 +195,7 @@ static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
 		dev_err(&port->dev,
 			"%s - failed submitting interrupt in urb, error code=%d\n",
 			__func__, result);
-		goto exit;
+		return result;
 	}
 
 	/* Send activate cmd to device */
@@ -198,9 +204,14 @@ static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
 		dev_err(&port->dev,
 			"%s - failed to configure device, error code=%d\n",
 			__func__, result);
-		goto exit;
+		goto err_kill_urb;
 	}
-exit:
+
+	return 0;
+
+err_kill_urb:
+	usb_kill_urb(port->interrupt_in_urb);
+
 	return result;
 }
 
@@ -337,7 +348,8 @@ static struct usb_serial_driver metrousb_device = {
 	},
 	.description		= "Metrologic USB to Serial",
 	.id_table		= id_table,
-	.num_ports		= 1,
+	.num_interrupt_in	= 1,
+	.calc_num_ports		= metrousb_calc_num_ports,
 	.open			= metrousb_open,
 	.close			= metrousb_cleanup,
 	.read_int_callback	= metrousb_read_int_callback,
@@ -356,7 +368,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 
 module_usb_serial_driver(serial_drivers, id_table);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Philip Nicastro");
 MODULE_AUTHOR("Aleksey Babahin <tamerlan311@gmail.com>");
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index a453965f9e9a..f4df3d5bf69c 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * mos7720.c
  *   Controls the Moschip 7720 usb to dual port serial converter
  *
  * Copyright 2006 Moschip Semiconductor Tech. Ltd.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, version 2 of the License.
- *
  * Developed by:
  * 	Vijaya Kumar <vijaykumar.gn@gmail.com>
  *	Ajay Kumar <naanuajay@yahoo.com>
@@ -2043,4 +2040,4 @@ module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index e8669aae14b3..a859c2d33c29 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1,18 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  * Clean ups from Moschip version and a few ioctl implementations by:
  *	Paul B Schroeder <pschroeder "at" uplogix "dot" com>
  *
diff --git a/drivers/usb/serial/mxuport.c b/drivers/usb/serial/mxuport.c
index 3aef091fe88b..2513ee902779 100644
--- a/drivers/usb/serial/mxuport.c
+++ b/drivers/usb/serial/mxuport.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  *	mxuport.c - MOXA UPort series driver
  *
  *	Copyright (c) 2006 Moxa Technologies Co., Ltd.
  *	Copyright (c) 2013 Andrew Lunn <andrew@lunn.ch>
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
  *	Supports the following Moxa USB to serial converters:
  *	 2 ports : UPort 1250, UPort 1250I
  *	 4 ports : UPort 1410, UPort 1450, UPort 1450I
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index 2a97cdc078d5..20277c52dded 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Navman Serial USB driver
  *
  * Copyright (C) 2006 Greg Kroah-Hartman <gregkh@suse.de>
  *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	version 2 as published by the Free Software Foundation.
- *
  * TODO:
  *	Add termios method that uses copy_hw but also kills all echo
  *	flags as the navman is rx only so cannot echo.
@@ -115,4 +112,4 @@ static struct usb_serial_driver * const serial_drivers[] = {
 
 module_usb_serial_driver(serial_drivers, id_table);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index efcd7feed6f4..e51c9464ea42 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB ZyXEL omni.net LCD PLUS driver
  *
  * Copyright (C) 2013,2017 Johan Hovold <johan@kernel.org>
  *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License version
- *	2 as published by the Free Software Foundation.
- *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
  *
@@ -179,4 +176,4 @@ module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 58657d64678b..caa0746326fd 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Opticon USB barcode to serial driver
  *
@@ -5,10 +6,6 @@
  * Copyright (C) 2011 Martin Jansen <martin.jansen@opticon.com>
  * Copyright (C) 2008 - 2009 Greg Kroah-Hartman <gregkh@suse.de>
  * Copyright (C) 2008 - 2009 Novell Inc.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License version
- *	2 as published by the Free Software Foundation.
  */
 
 #include <linux/kernel.h>
@@ -420,4 +417,4 @@ static struct usb_serial_driver * const serial_drivers[] = {
 module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index ba672cf4e888..aaa7d901a06d 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
   USB Driver for GSM modems
 
   Copyright (C) 2005  Matthias Urlichs <smurf@smurf.noris.de>
 
-  This driver is free software; you can redistribute it and/or modify
-  it under the terms of Version 2 of the GNU General Public License as
-  published by the Free Software Foundation.
-
   Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 
   History: see the git log.
@@ -2206,4 +2203,4 @@ static void option_instat_callback(struct urb *urb)
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index b11eead469ee..ae9cb15ee02d 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Ours Technology Inc. OTi-6858 USB to serial adapter driver.
  *
@@ -21,10 +22,6 @@
  * So, THIS CODE CAN DESTROY OTi-6858 AND ANY OTHER DEVICES, THAT ARE
  * CONNECTED TO IT!
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
  *
@@ -847,4 +844,4 @@ module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION(OTI6858_DESCRIPTION);
 MODULE_AUTHOR(OTI6858_AUTHOR);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/oti6858.h b/drivers/usb/serial/oti6858.h
index 704ac3a532b3..1226bf2347eb 100644
--- a/drivers/usb/serial/oti6858.h
+++ b/drivers/usb/serial/oti6858.h
@@ -1,10 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Ours Technology Inc. OTi-6858 USB to serial adapter driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 #ifndef __LINUX_USB_SERIAL_OTI6858_H
 #define __LINUX_USB_SERIAL_OTI6858_H
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index a585b477415d..57ae832a49ff 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Prolific PL2303 USB to serial adaptor driver
  *
@@ -6,10 +7,6 @@
  *
  * Original driver for 2.2.x by anonymous
  *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License version
- *	2 as published by the Free Software Foundation.
- *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
  */
@@ -1025,4 +1022,4 @@ static struct usb_serial_driver * const serial_drivers[] = {
 module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION("Prolific PL2303 USB to serial adaptor driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 3b5a15d1dc0d..f98fd84890de 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -1,11 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Prolific PL2303 USB to serial adaptor driver header file
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
  */
 
 #define BENQ_VENDOR_ID			0x04a5
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index 6e9f8af96959..929ffba663f2 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Qualcomm USB Auxiliary Serial Port driver
  *
  * Copyright (C) 2008 Greg Kroah-Hartman <greg@kroah.com>
  * Copyright (C) 2010 Dan Williams <dcbw@redhat.com>
  *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
  * Devices listed here usually provide a CDC ACM port on which normal modem
  * AT commands and PPP can be used.  But when that port is in-use by PPP it
  * cannot be used simultaneously for status or signal strength.  Instead, the
@@ -87,4 +84,4 @@ static struct usb_serial_driver * const serial_drivers[] = {
 };
 
 module_usb_serial_driver(serial_drivers, id_table);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index eb9928963a53..e3892541a489 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Qualcomm Serial USB driver
  *
  *	Copyright (c) 2008 QUALCOMM Incorporated.
  *	Copyright (c) 2009 Greg Kroah-Hartman <gregkh@suse.de>
  *	Copyright (c) 2009 Novell Inc.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License version
- *	2 as published by the Free Software Foundation.
- *
  */
 
 #include <linux/tty.h>
@@ -148,6 +144,7 @@ static const struct usb_device_id id_table[] = {
 	{DEVICE_SWI(0x1199, 0x68a2)},	/* Sierra Wireless MC7710 */
 	{DEVICE_SWI(0x1199, 0x68c0)},	/* Sierra Wireless MC7304/MC7354 */
 	{DEVICE_SWI(0x1199, 0x901c)},	/* Sierra Wireless EM7700 */
+	{DEVICE_SWI(0x1199, 0x901e)},	/* Sierra Wireless EM7355 QDL */
 	{DEVICE_SWI(0x1199, 0x901f)},	/* Sierra Wireless EM7355 */
 	{DEVICE_SWI(0x1199, 0x9040)},	/* Sierra Wireless Modem */
 	{DEVICE_SWI(0x1199, 0x9041)},	/* Sierra Wireless MC7305/MC7355 */
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 60e17d1444c3..958e12e1e7c7 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * usb-serial driver for Quatech USB 2 devices
  *
  * Copyright (C) 2012 Bill Pemberton (wfp5p@virginia.edu)
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- *
  *  These devices all have only 1 bulk in and 1 bulk out that is shared
  *  for all serial ports.
  *
@@ -1027,4 +1023,4 @@ static struct usb_serial_driver *const serial_drivers[] = {
 module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 27d7a7016298..6accbecb6318 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Safe Encapsulated USB Serial Driver
  *
@@ -5,11 +6,6 @@
  *      Copyright (C) 2001 Lineo
  *      Copyright (C) 2001 Hewlett-Packard
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
  * By:
  *      Stuart Lynne <sl@lineo.com>, Tom Rushworth <tbr@lineo.com>
  */
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 4c4ac4705ac0..d189f953c891 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
   USB Driver for Sierra Wireless
 
@@ -9,10 +10,6 @@
   IMPORTANT DISCLAIMER: This driver is not commercially supported by
   Sierra Wireless. Use at your own risk.
 
-  This driver is free software; you can redistribute it and/or modify
-  it under the terms of Version 2 of the GNU General Public License as
-  published by the Free Software Foundation.
-
   Portions based on the option driver by Matthias Urlichs <smurf@smurf.noris.de>
   Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 */
@@ -1078,7 +1075,7 @@ module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 
 module_param(nmea, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(nmea, "NMEA streaming");
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 5167b6564c8b..b42714855364 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * spcp8x5 USB to serial adaptor driver
  *
@@ -8,11 +9,6 @@
  * Original driver for 2.6.10 pl2303 driver by
  *   Greg Kroah-Hartman (greg@kroah.com)
  * Changes for 2.6.20 by Harald Klein <hari@vt100.at>
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
  */
 #include <linux/kernel.h>
 #include <linux/errno.h>
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 5aa7bbbeba3d..2083c267787b 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * usb-serial driver for Quatech SSU-100
  *
@@ -576,4 +577,4 @@ static struct usb_serial_driver * const serial_drivers[] = {
 module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 0d1727232d0c..cd2f8dc8b58c 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Symbol USB barcode to serial driver
  *
  * Copyright (C) 2013 Johan Hovold <jhovold@gmail.com>
  * Copyright (C) 2009 Greg Kroah-Hartman <gregkh@suse.de>
  * Copyright (C) 2009 Novell Inc.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License version
- *	2 as published by the Free Software Foundation.
  */
 
 #include <linux/kernel.h>
@@ -194,4 +191,4 @@ static struct usb_serial_driver * const serial_drivers[] = {
 
 module_usb_serial_driver(serial_drivers, id_table);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 8fc3854e5e69..6b22857f6e52 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * TI 3410/5052 USB Serial Driver
  *
@@ -7,11 +8,6 @@
  *   Copyright (C) 2000-2002 Inside Out Networks
  *   Copyright (C) 2001-2002 Greg Kroah-Hartman
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
  * For questions or problems with this driver, contact Texas Instruments
  * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
  * Peter Berger <pberger@brimson.com>.
diff --git a/drivers/usb/serial/upd78f0730.c b/drivers/usb/serial/upd78f0730.c
index 6819a3486e5d..1ba1401d27d7 100644
--- a/drivers/usb/serial/upd78f0730.c
+++ b/drivers/usb/serial/upd78f0730.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Renesas Electronics uPD78F0730 USB to serial converter driver
  *
  * Copyright (C) 2014,2016 Maksim Salau <maksim.salau@gmail.com>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
  * Protocol of the adaptor is described in the application note U19660EJ1V0AN00
  * μPD78F0730 8-bit Single-Chip Microcontroller
  * USB-to-Serial Conversion Software
diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
index e98b6e57b703..74172fe158df 100644
--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB Serial "Simple" driver
  *
@@ -8,10 +9,6 @@
  * Copyright (C) 2010 Zilogic Systems <code@zilogic.com>
  * Copyright (C) 2013 Wei Shuai <cpuwolf@gmail.com>
  * Copyright (C) 2013 Linux Foundation
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License version
- *	2 as published by the Free Software Foundation.
  */
 
 #include <linux/kernel.h>
@@ -134,4 +131,4 @@ static const struct usb_device_id id_table[] = {
 MODULE_DEVICE_TABLE(usb, id_table);
 
 module_usb_serial_driver(serial_drivers, id_table);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index bb34f9f7eaf4..790e0cbe3da9 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB Serial Converter driver
  *
@@ -6,10 +7,6 @@
  * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
  * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com)
  *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License version
- *	2 as published by the Free Software Foundation.
- *
  * This driver was originally based on the ACM driver by Armin Fuerst (which was
  * based on a driver by Brad Keryan)
  *
@@ -1201,17 +1198,6 @@ static const struct tty_operations serial_ops = {
 
 struct tty_driver *usb_serial_tty_driver;
 
-/* Driver structure we register with the USB core */
-static struct usb_driver usb_serial_driver = {
-	.name =		"usbserial",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.suspend =	usb_serial_suspend,
-	.resume =	usb_serial_resume,
-	.no_dynamic_id =	1,
-	.supports_autosuspend =	1,
-};
-
 static int __init usb_serial_init(void)
 {
 	int result;
@@ -1247,13 +1233,6 @@ static int __init usb_serial_init(void)
 		goto exit_reg_driver;
 	}
 
-	/* register the USB driver */
-	result = usb_register(&usb_serial_driver);
-	if (result < 0) {
-		pr_err("%s - usb_register failed\n", __func__);
-		goto exit_tty;
-	}
-
 	/* register the generic driver, if we should */
 	result = usb_serial_generic_register();
 	if (result < 0) {
@@ -1264,9 +1243,6 @@ static int __init usb_serial_init(void)
 	return result;
 
 exit_generic:
-	usb_deregister(&usb_serial_driver);
-
-exit_tty:
 	tty_unregister_driver(usb_serial_tty_driver);
 
 exit_reg_driver:
@@ -1285,7 +1261,6 @@ static void __exit usb_serial_exit(void)
 
 	usb_serial_generic_deregister();
 
-	usb_deregister(&usb_serial_driver);
 	tty_unregister_driver(usb_serial_tty_driver);
 	put_tty_driver(usb_serial_tty_driver);
 	bus_unregister(&usb_serial_bus_type);
@@ -1460,4 +1435,4 @@ EXPORT_SYMBOL_GPL(usb_serial_deregister_drivers);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index 12f4c5a91e62..ab5a2ac4993a 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB Debug cable driver
  *
  * Copyright (C) 2006 Greg Kroah-Hartman <greg@kroah.com>
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License version
- *	2 as published by the Free Software Foundation.
  */
 
 #include <linux/gfp.h>
@@ -34,13 +31,13 @@ static const struct usb_device_id id_table[] = {
 };
 
 static const struct usb_device_id dbc_id_table[] = {
-	{ USB_DEVICE(0x1d6b, 0x0004) },
+	{ USB_DEVICE(0x1d6b, 0x0011) },
 	{ },
 };
 
 static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(0x0525, 0x127a) },
-	{ USB_DEVICE(0x1d6b, 0x0004) },
+	{ USB_DEVICE(0x1d6b, 0x0011) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table_combined);
@@ -98,4 +95,4 @@ static struct usb_serial_driver * const serial_drivers[] = {
 };
 
 module_usb_serial_driver(serial_drivers, id_table_combined);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 59bfcb3da116..107e64c42e94 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
   USB Driver layer for GSM modems
 
   Copyright (C) 2005  Matthias Urlichs <smurf@smurf.noris.de>
 
-  This driver is free software; you can redistribute it and/or modify
-  it under the terms of Version 2 of the GNU General Public License as
-  published by the Free Software Foundation.
-
   Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 
   History: see the git log.
@@ -723,4 +720,4 @@ EXPORT_SYMBOL(usb_wwan_resume);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 9f3317a940ef..f5373ed2cd45 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB HandSpring Visor, Palm m50x, and Sony Clie driver
  * (supports all of the Palm OS USB devices)
@@ -5,10 +6,6 @@
  *	Copyright (C) 1999 - 2004
  *	    Greg Kroah-Hartman (greg@kroah.com)
  *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License version
- *	2 as published by the Free Software Foundation.
- *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
  *
@@ -579,4 +576,4 @@ module_usb_serial_driver(serial_drivers, id_table_combined);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/serial/visor.h b/drivers/usb/serial/visor.h
index 4c456dd69ce5..fe290243f1ce 100644
--- a/drivers/usb/serial/visor.h
+++ b/drivers/usb/serial/visor.h
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * USB HandSpring Visor driver
  *
  *	Copyright (C) 1999 - 2003
  *	    Greg Kroah-Hartman (greg@kroah.com)
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver.
  *
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 55cebc1e6fec..1c7b46a8620c 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * USB ConnectTech WhiteHEAT driver
  *
@@ -7,11 +8,6 @@
  *	Copyright (C) 1999 - 2001
  *	    Greg Kroah-Hartman (greg@kroah.com)
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
  */
diff --git a/drivers/usb/serial/whiteheat.h b/drivers/usb/serial/whiteheat.h
index 38065df4d2d8..72c1b0cf4063 100644
--- a/drivers/usb/serial/whiteheat.h
+++ b/drivers/usb/serial/whiteheat.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * USB ConnectTech WhiteHEAT driver
  *
@@ -7,11 +8,6 @@
  *      Copyright (C) 1999, 2000
  *          Greg Kroah-Hartman (greg@kroah.com)
  *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
  *
diff --git a/drivers/usb/serial/wishbone-serial.c b/drivers/usb/serial/wishbone-serial.c
index 4fed4a0bd702..ff4092f9b33c 100644
--- a/drivers/usb/serial/wishbone-serial.c
+++ b/drivers/usb/serial/wishbone-serial.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * USB Wishbone-Serial adapter driver
  *
  * Copyright (C) 2013 Wesley W. Terpstra <w.terpstra@gsi.de>
  * Copyright (C) 2013 GSI Helmholtz Centre for Heavy Ion Research GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/serial/xsens_mt.c b/drivers/usb/serial/xsens_mt.c
index 3837d5113bb2..cf262c9a9638 100644
--- a/drivers/usb/serial/xsens_mt.c
+++ b/drivers/usb/serial/xsens_mt.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Xsens MT USB driver
  *
  * Copyright (C) 2013 Xsens <info@xsens.com>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License version
- *  2 as published by the Free Software Foundation.
  */
 
 #include <linux/kernel.h>
@@ -69,4 +66,4 @@ module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR("Frans Klaver <frans.klaver@xsens.com>");
 MODULE_DESCRIPTION("USB-serial driver for Xsens motion trackers");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
index 878b4b8761f5..900591df8bb2 100644
--- a/drivers/usb/storage/alauda.c
+++ b/drivers/usb/storage/alauda.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for Alauda-based card readers
  *
@@ -15,20 +16,6 @@
  * (very old) vendor-supplied GPL sma03 driver.
  *
  * For protocol info, see http://alauda.sourceforge.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c
index 5e4af44d7d9f..4825902377eb 100644
--- a/drivers/usb/storage/cypress_atacb.c
+++ b/drivers/usb/storage/cypress_atacb.c
@@ -1,22 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Support for emulating SAT (ata pass through) on devices based
  *       on the Cypress USB/ATA bridge supporting ATACB.
  *
  * Copyright (c) 2008 Matthieu Castet (castet.matthieu@free.fr)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c
index 723197af6ec5..09353be199be 100644
--- a/drivers/usb/storage/datafab.c
+++ b/drivers/usb/storage/datafab.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for Datafab USB Compact Flash reader
  *
@@ -18,20 +19,6 @@
  *
  * Other contributors:
  *   (c) 2002 Alan Stern <stern@rowland.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 /*
diff --git a/drivers/usb/storage/debug.c b/drivers/usb/storage/debug.c
index 8d20804a59e6..e5a4969d15ae 100644
--- a/drivers/usb/storage/debug.c
+++ b/drivers/usb/storage/debug.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for USB Mass Storage compliant devices
  * Debugging Functions Source Code File
@@ -27,20 +28,6 @@
  *
  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  * information about this driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/device.h>
diff --git a/drivers/usb/storage/debug.h b/drivers/usb/storage/debug.h
index 8ab73299b650..8833cd4f78b6 100644
--- a/drivers/usb/storage/debug.h
+++ b/drivers/usb/storage/debug.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for USB Mass Storage compliant devices
  * Debugging Functions Header File
@@ -24,20 +25,6 @@
  *
  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  * information about this driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #ifndef _DEBUG_H_
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index 28100374f7bd..93cf57ac47d6 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -1,19 +1,4 @@
-/*
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
+// SPDX-License-Identifier: GPL-2.0+
 #include <linux/jiffies.h>
 #include <linux/errno.h>
 #include <linux/module.h>
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c
index c0a5d954414b..ec4d92c92762 100644
--- a/drivers/usb/storage/freecom.c
+++ b/drivers/usb/storage/freecom.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for Freecom USB/IDE adaptor
  *
@@ -8,20 +9,6 @@
  * Current development and maintenance by:
  *   (C) 2000 David Brown <usb-storage@davidb.org>
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
  * This driver was developed with information provided in FREECOM's USB
  * Programmers Reference Guide.  For further information contact Freecom
  * (http://www.freecom.de/)
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index d9d8c17e05d1..93a6bcf77806 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Special Initializers for certain USB Mass Storage devices
  *
@@ -20,20 +21,6 @@
  *
  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  * information about this driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/errno.h>
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
index 039abf4d1cb7..e4cf28efb4a7 100644
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Header file for Special Initializers for certain USB Mass Storage devices
  *
@@ -20,20 +21,6 @@
  *
  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  * information about this driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include "usb.h"
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 6a7720e66595..f5e4500d9970 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Transport & Protocol Driver for In-System Design, Inc. ISD200 ASIC
  *
@@ -14,20 +15,6 @@
  * does implement an interface, the ATA Command Block (ATACB) which provides
  * a means of passing ATA commands and ATA register accesses to a device.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
  * History:
  *
  *  2002-10-19: Removed the specialized transfer routines.
diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c
index 011e5270690a..917f170c4124 100644
--- a/drivers/usb/storage/jumpshot.c
+++ b/drivers/usb/storage/jumpshot.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for Lexar "Jumpshot" Compact Flash reader
  *
@@ -19,20 +20,6 @@
  * Developed with the assistance of:
  *
  *   (C) 2002 Alan Stern <stern@rowland.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
  
  /*
diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c
index b05ba4929f00..edcf2be0e0eb 100644
--- a/drivers/usb/storage/karma.c
+++ b/drivers/usb/storage/karma.c
@@ -1,22 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for Rio Karma
  *
  *   (c) 2006 Bob Copeland <me@bobcopeland.com>
  *   (c) 2006 Keith Bennett <keith@mcs.st-and.ac.uk>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index acc3d03d8c1e..39a5009a41a6 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Support for the Maxtor OneTouch USB hard drive's button
  *
@@ -10,24 +11,6 @@
  * Based on usbmouse.c (Vojtech Pavlik) and xpad.c (Marko Friedemann)
  *
  */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
 #include <linux/kernel.h>
 #include <linux/input.h>
 #include <linux/slab.h>
diff --git a/drivers/usb/storage/option_ms.c b/drivers/usb/storage/option_ms.c
index 57282f12317b..7c0b05a36554 100644
--- a/drivers/usb/storage/option_ms.c
+++ b/drivers/usb/storage/option_ms.c
@@ -1,23 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for Option High Speed Mobile Devices.
  *
  *   (c) 2008 Dan Williams <dcbw@redhat.com>
  *
  * Inspiration taken from sierra_ms.c by Kevin Lloyd <klloyd@sierrawireless.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/usb.h>
@@ -41,7 +28,7 @@ MODULE_PARM_DESC(option_zero_cd, "ZeroCD mode (1=Force Modem (default),"
 
 static int option_rezero(struct us_data *us)
 {
-	const unsigned char rezero_msg[] = {
+	static const unsigned char rezero_msg[] = {
 	  0x55, 0x53, 0x42, 0x43, 0x78, 0x56, 0x34, 0x12,
 	  0x01, 0x00, 0x00, 0x00, 0x80, 0x00, 0x06, 0x01,
 	  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -87,7 +74,7 @@ out:
 
 static int option_inquiry(struct us_data *us)
 {
-	const unsigned char inquiry_msg[] = {
+	static const unsigned char inquiry_msg[] = {
 	  0x55, 0x53, 0x42, 0x43, 0x12, 0x34, 0x56, 0x78,
 	  0x24, 0x00, 0x00, 0x00, 0x80, 0x00, 0x06, 0x12,
 	  0x00, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x00,
diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c
index 74c38870a17e..f3f2a93f52e1 100644
--- a/drivers/usb/storage/protocol.c
+++ b/drivers/usb/storage/protocol.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for USB Mass Storage compliant devices
  *
@@ -27,20 +28,6 @@
  *
  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  * information about this driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/highmem.h>
diff --git a/drivers/usb/storage/protocol.h b/drivers/usb/storage/protocol.h
index a55666880b7b..9198396e8c6e 100644
--- a/drivers/usb/storage/protocol.h
+++ b/drivers/usb/storage/protocol.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for USB Mass Storage compliant devices
  * Protocol Functions Header File
@@ -21,20 +22,6 @@
  *
  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  * information about this driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #ifndef _PROTOCOL_H_
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index ec83b3b5efa9..48e2e32c97e8 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -1,21 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for Realtek RTS51xx USB card reader
  *
  * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
  * Author:
  *   wwang (wei_wang@realsil.com.cn)
  *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 8cd2926fb1fe..585efd120193 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for USB Mass Storage compliant devices
  * SCSI layer glue code
@@ -28,20 +29,6 @@
  *
  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  * information about this driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/storage/scsiglue.h b/drivers/usb/storage/scsiglue.h
index d0a331dd9bc5..bf99c6201331 100644
--- a/drivers/usb/storage/scsiglue.h
+++ b/drivers/usb/storage/scsiglue.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for USB Mass Storage compliant devices
  * SCSI Connecting Glue Header File
@@ -21,20 +22,6 @@
  *
  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  * information about this driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #ifndef _SCSIGLUE_H_
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index 44f8ffccd031..1cf7dbfe277c 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for SanDisk SDDR-09 SmartMedia reader
  *
@@ -11,20 +12,6 @@
  * been programmed to obey a certain limited set of SCSI commands.
  * This driver translates the "real" SCSI commands to the SDDR-09 SCSI
  * commands.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 /*
diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c
index 147c50b3e00f..8c814b2ec9b2 100644
--- a/drivers/usb/storage/sddr55.c
+++ b/drivers/usb/storage/sddr55.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for SanDisk SDDR-55 SmartMedia reader
  *
@@ -7,20 +8,6 @@
  *
  * Current development and maintenance by:
  *   (c) 2002 Simon Munton
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/jiffies.h>
@@ -604,6 +591,7 @@ static unsigned long sddr55_get_capacity(struct us_data *us) {
 	case 0x64:
 		info->pageshift = 8;
 		info->smallpageshift = 1;
+		/* fall through */
 	case 0x5d: // 5d is a ROM card with pagesize 512.
 		return 0x00200000;
 
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index 3b0294e4df93..854498e1012c 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
  *
@@ -26,20 +27,6 @@
  *
  * See the Kconfig help text for a list of devices known to be supported by
  * this driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/errno.h>
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index a3ccb899df60..d947957f3635 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for USB Mass Storage compliant devices
  *
@@ -28,20 +29,6 @@
  *
  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  * information about this driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/sched.h>
diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h
index dae3ecd2e6cf..f559dc575f4f 100644
--- a/drivers/usb/storage/transport.h
+++ b/drivers/usb/storage/transport.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for USB Mass Storage compliant devices
  * Transport Functions Header File
@@ -21,20 +22,6 @@
  *
  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  * information about this driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #ifndef _TRANSPORT_H_
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 63cf981ed81c..5d04c40ee40a 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB Attached SCSI
  * Note that this is not the same as the USB Mass Storage driver
@@ -5,8 +6,6 @@
  * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2016
  * Copyright Matthew Wilcox for Intel Corp, 2010
  * Copyright Sarah Sharp for Intel Corp, 2010
- *
- * Distributed under the terms of the GNU GPL, version two.
  */
 
 #include <linux/blkdev.h>
@@ -668,6 +667,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 		break;
 	case DMA_BIDIRECTIONAL:
 		cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
+		/* fall through */
 	case DMA_TO_DEVICE:
 		cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB;
 	case DMA_NONE:
diff --git a/drivers/usb/storage/unusual_alauda.h b/drivers/usb/storage/unusual_alauda.h
index 763bc03032a1..0ec8c99a4976 100644
--- a/drivers/usb/storage/unusual_alauda.h
+++ b/drivers/usb/storage/unusual_alauda.h
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Unusual Devices File for the Alauda-based card readers
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #if defined(CONFIG_USB_STORAGE_ALAUDA) || \
diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h
index e9a2eb88869a..fb99e526cd48 100644
--- a/drivers/usb/storage/unusual_cypress.h
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -1,20 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Unusual Devices File for devices based on the Cypress USB/ATA bridge
  *	with support for ATACB
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #if defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || \
diff --git a/drivers/usb/storage/unusual_datafab.h b/drivers/usb/storage/unusual_datafab.h
index 5049b6bbe5d5..fdab5e7d68ca 100644
--- a/drivers/usb/storage/unusual_datafab.h
+++ b/drivers/usb/storage/unusual_datafab.h
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Unusual Devices File for the Datafab USB Compact Flash reader
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #if defined(CONFIG_USB_STORAGE_DATAFAB) || \
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index eb06d88b41d6..2968046e7c05 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for USB Mass Storage compliant devices
  * Unusual Devices File
@@ -10,20 +11,6 @@
  *
  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  * information about this driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 /*
diff --git a/drivers/usb/storage/unusual_ene_ub6250.h b/drivers/usb/storage/unusual_ene_ub6250.h
index 5667f5d365c6..9134b91fbd73 100644
--- a/drivers/usb/storage/unusual_ene_ub6250.h
+++ b/drivers/usb/storage/unusual_ene_ub6250.h
@@ -1,20 +1,4 @@
-/*
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
+// SPDX-License-Identifier: GPL-2.0+
 #if defined(CONFIG_USB_STORAGE_ENE_UB6250) || \
 		defined(CONFIG_USB_STORAGE_ENE_UB6250_MODULE)
 
diff --git a/drivers/usb/storage/unusual_freecom.h b/drivers/usb/storage/unusual_freecom.h
index 1f5aab42ece2..949231c7a36b 100644
--- a/drivers/usb/storage/unusual_freecom.h
+++ b/drivers/usb/storage/unusual_freecom.h
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Unusual Devices File for the Freecom USB/IDE adaptor
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #if defined(CONFIG_USB_STORAGE_FREECOM) || \
diff --git a/drivers/usb/storage/unusual_isd200.h b/drivers/usb/storage/unusual_isd200.h
index 9b6862ec3d4f..d03a02cc904e 100644
--- a/drivers/usb/storage/unusual_isd200.h
+++ b/drivers/usb/storage/unusual_isd200.h
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Unusual Devices File for In-System Design, Inc. ISD200 ASIC
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #if defined(CONFIG_USB_STORAGE_ISD200) || \
diff --git a/drivers/usb/storage/unusual_jumpshot.h b/drivers/usb/storage/unusual_jumpshot.h
index 413e64fa6b95..c323338881ef 100644
--- a/drivers/usb/storage/unusual_jumpshot.h
+++ b/drivers/usb/storage/unusual_jumpshot.h
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Unusual Devices File for the Lexar "Jumpshot" Compact Flash reader
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #if defined(CONFIG_USB_STORAGE_JUMPSHOT) || \
diff --git a/drivers/usb/storage/unusual_karma.h b/drivers/usb/storage/unusual_karma.h
index e6fad3aeae20..8f1eebd71d2c 100644
--- a/drivers/usb/storage/unusual_karma.h
+++ b/drivers/usb/storage/unusual_karma.h
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Unusual Devices File for the Rio Karma
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #if defined(CONFIG_USB_STORAGE_KARMA) || \
diff --git a/drivers/usb/storage/unusual_onetouch.h b/drivers/usb/storage/unusual_onetouch.h
index 425dc22f345a..c76d4e990f7b 100644
--- a/drivers/usb/storage/unusual_onetouch.h
+++ b/drivers/usb/storage/unusual_onetouch.h
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Unusual Devices File for the Maxtor OneTouch USB hard drive's button
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #if defined(CONFIG_USB_STORAGE_ONETOUCH) || \
diff --git a/drivers/usb/storage/unusual_realtek.h b/drivers/usb/storage/unusual_realtek.h
index 8fe624ad302a..d17cd95b55bb 100644
--- a/drivers/usb/storage/unusual_realtek.h
+++ b/drivers/usb/storage/unusual_realtek.h
@@ -1,21 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for Realtek RTS51xx USB card reader
  *
  * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
  * Author:
  *   wwang (wei_wang@realsil.com.cn)
  *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
diff --git a/drivers/usb/storage/unusual_sddr09.h b/drivers/usb/storage/unusual_sddr09.h
index d9d38ac4abf9..650cf2862754 100644
--- a/drivers/usb/storage/unusual_sddr09.h
+++ b/drivers/usb/storage/unusual_sddr09.h
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Unusual Devices File for SanDisk SDDR-09 SmartMedia reader
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #if defined(CONFIG_USB_STORAGE_SDDR09) || \
diff --git a/drivers/usb/storage/unusual_sddr55.h b/drivers/usb/storage/unusual_sddr55.h
index ebb1d1c6c467..e89df2cea7bd 100644
--- a/drivers/usb/storage/unusual_sddr55.h
+++ b/drivers/usb/storage/unusual_sddr55.h
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Unusual Devices File for SanDisk SDDR-55 SmartMedia reader
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #if defined(CONFIG_USB_STORAGE_SDDR55) || \
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index cde115359793..d520374a824e 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for USB Attached SCSI devices - Unusual Devices File
  *
@@ -6,20 +7,6 @@
  * Based on the same file for the usb-storage driver, which is:
  *   (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
  *   (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 /*
diff --git a/drivers/usb/storage/unusual_usbat.h b/drivers/usb/storage/unusual_usbat.h
index 2044ad5ef5e4..05abf6870b8f 100644
--- a/drivers/usb/storage/unusual_usbat.h
+++ b/drivers/usb/storage/unusual_usbat.h
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Unusual Devices File for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #if defined(CONFIG_USB_STORAGE_USBAT) || \
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 0dceb9fa3a06..a0c07e05a8f1 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for USB Mass Storage compliant devices
  *
@@ -30,20 +31,6 @@
  *
  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  * information about this driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #ifdef CONFIG_USB_STORAGE_DEBUG
@@ -332,7 +319,7 @@ static int usb_stor_control_thread(void * __us)
 
 		/* When we are called with no command pending, we're done */
 		srb = us->srb;
-		if (us->srb == NULL) {
+		if (srb == NULL) {
 			scsi_unlock(host);
 			mutex_unlock(&us->dev_mutex);
 			usb_stor_dbg(us, "-- exiting\n");
@@ -341,7 +328,7 @@ static int usb_stor_control_thread(void * __us)
 
 		/* has the command timed out *already* ? */
 		if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
-			us->srb->result = DID_ABORT << 16;
+			srb->result = DID_ABORT << 16;
 			goto SkipForAbort;
 		}
 
@@ -351,35 +338,35 @@ static int usb_stor_control_thread(void * __us)
 		 * reject the command if the direction indicator
 		 * is UNKNOWN
 		 */
-		if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
+		if (srb->sc_data_direction == DMA_BIDIRECTIONAL) {
 			usb_stor_dbg(us, "UNKNOWN data direction\n");
-			us->srb->result = DID_ERROR << 16;
+			srb->result = DID_ERROR << 16;
 		}
 
 		/*
 		 * reject if target != 0 or if LUN is higher than
 		 * the maximum known LUN
 		 */
-		else if (us->srb->device->id &&
+		else if (srb->device->id &&
 				!(us->fflags & US_FL_SCM_MULT_TARG)) {
 			usb_stor_dbg(us, "Bad target number (%d:%llu)\n",
-				     us->srb->device->id,
-				     us->srb->device->lun);
-			us->srb->result = DID_BAD_TARGET << 16;
+				     srb->device->id,
+				     srb->device->lun);
+			srb->result = DID_BAD_TARGET << 16;
 		}
 
-		else if (us->srb->device->lun > us->max_lun) {
+		else if (srb->device->lun > us->max_lun) {
 			usb_stor_dbg(us, "Bad LUN (%d:%llu)\n",
-				     us->srb->device->id,
-				     us->srb->device->lun);
-			us->srb->result = DID_BAD_TARGET << 16;
+				     srb->device->id,
+				     srb->device->lun);
+			srb->result = DID_BAD_TARGET << 16;
 		}
 
 		/*
 		 * Handle those devices which need us to fake
 		 * their inquiry data
 		 */
-		else if ((us->srb->cmnd[0] == INQUIRY) &&
+		else if ((srb->cmnd[0] == INQUIRY) &&
 			    (us->fflags & US_FL_FIX_INQUIRY)) {
 			unsigned char data_ptr[36] = {
 			    0x00, 0x80, 0x02, 0x02,
@@ -387,13 +374,13 @@ static int usb_stor_control_thread(void * __us)
 
 			usb_stor_dbg(us, "Faking INQUIRY command\n");
 			fill_inquiry_response(us, data_ptr, 36);
-			us->srb->result = SAM_STAT_GOOD;
+			srb->result = SAM_STAT_GOOD;
 		}
 
 		/* we've got a command, let's do it! */
 		else {
-			US_DEBUG(usb_stor_show_command(us, us->srb));
-			us->proto_handler(us->srb, us);
+			US_DEBUG(usb_stor_show_command(us, srb));
+			us->proto_handler(srb, us);
 			usb_mark_last_busy(us->pusb_dev);
 		}
 
@@ -401,7 +388,7 @@ static int usb_stor_control_thread(void * __us)
 		scsi_lock(host);
 
 		/* was the command aborted? */
-		if (us->srb->result == DID_ABORT << 16) {
+		if (srb->result == DID_ABORT << 16) {
 SkipForAbort:
 			usb_stor_dbg(us, "scsi command aborted\n");
 			srb = NULL;	/* Don't call srb->scsi_done() */
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 8fae28b40bb4..90133e16bec5 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for USB Mass Storage compliant devices
  * Main Header File
@@ -24,20 +25,6 @@
  *
  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  * information about this driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #ifndef _USB_H_
diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c
index 499669bcf700..83ad01747eed 100644
--- a/drivers/usb/storage/usual-tables.c
+++ b/drivers/usb/storage/usual-tables.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for USB Mass Storage devices
  * Usual Tables File for usb-storage and libusual
@@ -6,20 +7,6 @@
  *
  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  * information about this driver.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
index 819c0ed2b200..465d7da849c3 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
@@ -16,8 +16,6 @@ if TYPEC_TCPM
 
 source "drivers/usb/typec/fusb302/Kconfig"
 
-endif
-
 config TYPEC_WCOVE
 	tristate "Intel WhiskeyCove PMIC USB Type-C PHY driver"
 	depends on ACPI
@@ -33,6 +31,19 @@ config TYPEC_WCOVE
 	  To compile this driver as module, choose M here: the module will be
 	  called typec_wcove
 
+endif
+
 source "drivers/usb/typec/ucsi/Kconfig"
 
+config TYPEC_TPS6598X
+	tristate "TI TPS6598x USB Power Delivery controller driver"
+	depends on I2C
+	select TYPEC
+	help
+	  Say Y or M here if your system has TI TPS65982 or TPS65983 USB Power
+	  Delivery controller.
+
+	  If you choose to build this driver as a dynamically linked module, the
+	  module will be called tps6598x.ko.
+
 endmenu
diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
index b77688ce1f16..bb3138a6eaac 100644
--- a/drivers/usb/typec/Makefile
+++ b/drivers/usb/typec/Makefile
@@ -1,5 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_TYPEC)		+= typec.o
 obj-$(CONFIG_TYPEC_TCPM)	+= tcpm.o
 obj-y				+= fusb302/
 obj-$(CONFIG_TYPEC_WCOVE)	+= typec_wcove.o
 obj-$(CONFIG_TYPEC_UCSI)	+= ucsi/
+obj-$(CONFIG_TYPEC_TPS6598X)	+= tps6598x.o
diff --git a/drivers/usb/typec/fusb302/Makefile b/drivers/usb/typec/fusb302/Makefile
index 207efa5fbab8..3b51b33631a0 100644
--- a/drivers/usb/typec/fusb302/Makefile
+++ b/drivers/usb/typec/fusb302/Makefile
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_TYPEC_FUSB302)	+= fusb302.o
diff --git a/drivers/usb/typec/fusb302/fusb302.c b/drivers/usb/typec/fusb302/fusb302.c
index e790b67d4953..72cb060b3fca 100644
--- a/drivers/usb/typec/fusb302/fusb302.c
+++ b/drivers/usb/typec/fusb302/fusb302.c
@@ -1,16 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2016-2017 Google, Inc
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  * Fairchild FUSB302 Type-C Chip Driver
  */
 
diff --git a/drivers/usb/typec/fusb302/fusb302_reg.h b/drivers/usb/typec/fusb302/fusb302_reg.h
index 0682e63de773..00b39d365478 100644
--- a/drivers/usb/typec/fusb302/fusb302_reg.h
+++ b/drivers/usb/typec/fusb302/fusb302_reg.h
@@ -1,16 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2016-2017 Google, Inc
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  * Fairchild FUSB302 Type-C Chip Driver
  */
 
diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c
index f557c479fdc2..c166fc77dfb8 100644
--- a/drivers/usb/typec/tcpm.c
+++ b/drivers/usb/typec/tcpm.c
@@ -1,16 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2015-2017 Google, Inc
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  * USB Power Delivery protocol stack.
  */
 
@@ -986,7 +977,7 @@ static void svdm_consume_modes(struct tcpm_port *port, const __le32 *payload,
 	}
 	port->partner_altmode[pmdata->altmodes] =
 		typec_partner_register_altmode(port->partner, paltmode);
-	if (port->partner_altmode[pmdata->altmodes] == NULL) {
+	if (!port->partner_altmode[pmdata->altmodes]) {
 		tcpm_log(port,
 			 "Failed to register alternate modes for SVID 0x%04x",
 			 paltmode->svid);
@@ -3602,6 +3593,7 @@ void tcpm_unregister_port(struct tcpm_port *port)
 {
 	int i;
 
+	tcpm_reset_port(port);
 	for (i = 0; i < ARRAY_SIZE(port->port_altmode); i++)
 		typec_unregister_altmode(port->port_altmode[i]);
 	typec_unregister_port(port->typec_port);
diff --git a/drivers/usb/typec/tps6598x.c b/drivers/usb/typec/tps6598x.c
new file mode 100644
index 000000000000..2719f5d382f7
--- /dev/null
+++ b/drivers/usb/typec/tps6598x.c
@@ -0,0 +1,473 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for TI TPS6598x USB Power Delivery controller family
+ *
+ * Copyright (C) 2017, Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/interrupt.h>
+#include <linux/usb/typec.h>
+
+/* Register offsets */
+#define TPS_REG_CMD1			0x08
+#define TPS_REG_DATA1			0x09
+#define TPS_REG_INT_EVENT1		0x14
+#define TPS_REG_INT_EVENT2		0x15
+#define TPS_REG_INT_MASK1		0x16
+#define TPS_REG_INT_MASK2		0x17
+#define TPS_REG_INT_CLEAR1		0x18
+#define TPS_REG_INT_CLEAR2		0x19
+#define TPS_REG_STATUS			0x1a
+#define TPS_REG_SYSTEM_CONF		0x28
+#define TPS_REG_CTRL_CONF		0x29
+#define TPS_REG_POWER_STATUS		0x3f
+#define TPS_REG_RX_IDENTITY_SOP		0x48
+
+/* TPS_REG_INT_* bits */
+#define TPS_REG_INT_PLUG_EVENT		BIT(3)
+
+/* TPS_REG_STATUS bits */
+#define TPS_STATUS_PLUG_PRESENT		BIT(0)
+#define TPS_STATUS_ORIENTATION		BIT(4)
+#define TPS_STATUS_PORTROLE(s)		(!!((s) & BIT(5)))
+#define TPS_STATUS_DATAROLE(s)		(!!((s) & BIT(6)))
+#define TPS_STATUS_VCONN(s)		(!!((s) & BIT(7)))
+
+/* TPS_REG_SYSTEM_CONF bits */
+#define TPS_SYSCONF_PORTINFO(c)		((c) & 3)
+
+enum {
+	TPS_PORTINFO_SINK,
+	TPS_PORTINFO_SINK_ACCESSORY,
+	TPS_PORTINFO_DRP_UFP,
+	TPS_PORTINFO_DRP_UFP_DRD,
+	TPS_PORTINFO_DRP_DFP,
+	TPS_PORTINFO_DRP_DFP_DRD,
+	TPS_PORTINFO_SOURCE,
+};
+
+/* TPS_REG_POWER_STATUS bits */
+#define TPS_POWER_STATUS_SOURCESINK	BIT(1)
+#define TPS_POWER_STATUS_PWROPMODE(p)	(((p) & GENMASK(3, 2)) >> 2)
+
+/* TPS_REG_RX_IDENTITY_SOP */
+struct tps6598x_rx_identity_reg {
+	u8 status;
+	struct usb_pd_identity identity;
+	u32 vdo[3];
+} __packed;
+
+/* Standard Task return codes */
+#define TPS_TASK_TIMEOUT		1
+#define TPS_TASK_REJECTED		3
+
+/* Unrecognized commands will be replaced with "!CMD" */
+#define INVALID_CMD(_cmd_)		(_cmd_ == 0x444d4321)
+
+struct tps6598x {
+	struct device *dev;
+	struct regmap *regmap;
+	struct mutex lock; /* device lock */
+
+	struct typec_port *port;
+	struct typec_partner *partner;
+	struct usb_pd_identity partner_identity;
+	struct typec_capability typec_cap;
+};
+
+static inline int tps6598x_read16(struct tps6598x *tps, u8 reg, u16 *val)
+{
+	return regmap_raw_read(tps->regmap, reg, val, sizeof(u16));
+}
+
+static inline int tps6598x_read32(struct tps6598x *tps, u8 reg, u32 *val)
+{
+	return regmap_raw_read(tps->regmap, reg, val, sizeof(u32));
+}
+
+static inline int tps6598x_read64(struct tps6598x *tps, u8 reg, u64 *val)
+{
+	return regmap_raw_read(tps->regmap, reg, val, sizeof(u64));
+}
+
+static inline int tps6598x_write16(struct tps6598x *tps, u8 reg, u16 val)
+{
+	return regmap_raw_write(tps->regmap, reg, &val, sizeof(u16));
+}
+
+static inline int tps6598x_write32(struct tps6598x *tps, u8 reg, u32 val)
+{
+	return regmap_raw_write(tps->regmap, reg, &val, sizeof(u32));
+}
+
+static inline int tps6598x_write64(struct tps6598x *tps, u8 reg, u64 val)
+{
+	return regmap_raw_write(tps->regmap, reg, &val, sizeof(u64));
+}
+
+static inline int
+tps6598x_write_4cc(struct tps6598x *tps, u8 reg, const char *val)
+{
+	return regmap_raw_write(tps->regmap, reg, &val, sizeof(u32));
+}
+
+static int tps6598x_read_partner_identity(struct tps6598x *tps)
+{
+	struct tps6598x_rx_identity_reg id;
+	int ret;
+
+	ret = regmap_raw_read(tps->regmap, TPS_REG_RX_IDENTITY_SOP,
+			      &id, sizeof(id));
+	if (ret)
+		return ret;
+
+	tps->partner_identity = id.identity;
+
+	return 0;
+}
+
+static int tps6598x_connect(struct tps6598x *tps, u32 status)
+{
+	struct typec_partner_desc desc;
+	enum typec_pwr_opmode mode;
+	u16 pwr_status;
+	int ret;
+
+	if (tps->partner)
+		return 0;
+
+	ret = tps6598x_read16(tps, TPS_REG_POWER_STATUS, &pwr_status);
+	if (ret < 0)
+		return ret;
+
+	mode = TPS_POWER_STATUS_PWROPMODE(pwr_status);
+
+	desc.usb_pd = mode == TYPEC_PWR_MODE_PD;
+	desc.accessory = TYPEC_ACCESSORY_NONE; /* XXX: handle accessories */
+	desc.identity = NULL;
+
+	if (desc.usb_pd) {
+		ret = tps6598x_read_partner_identity(tps);
+		if (ret)
+			return ret;
+		desc.identity = &tps->partner_identity;
+	}
+
+	tps->partner = typec_register_partner(tps->port, &desc);
+	if (!tps->partner)
+		return -ENODEV;
+
+	typec_set_pwr_opmode(tps->port, mode);
+	typec_set_pwr_role(tps->port, TPS_STATUS_PORTROLE(status));
+	typec_set_vconn_role(tps->port, TPS_STATUS_VCONN(status));
+	typec_set_data_role(tps->port, TPS_STATUS_DATAROLE(status));
+
+	if (desc.identity)
+		typec_partner_set_identity(tps->partner);
+
+	return 0;
+}
+
+static void tps6598x_disconnect(struct tps6598x *tps, u32 status)
+{
+	typec_unregister_partner(tps->partner);
+	tps->partner = NULL;
+	typec_set_pwr_opmode(tps->port, TYPEC_PWR_MODE_USB);
+	typec_set_pwr_role(tps->port, TPS_STATUS_PORTROLE(status));
+	typec_set_vconn_role(tps->port, TPS_STATUS_VCONN(status));
+	typec_set_data_role(tps->port, TPS_STATUS_DATAROLE(status));
+}
+
+static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
+			     size_t in_len, u8 *in_data,
+			     size_t out_len, u8 *out_data)
+{
+	unsigned long timeout;
+	u32 val;
+	int ret;
+
+	ret = tps6598x_read32(tps, TPS_REG_CMD1, &val);
+	if (ret)
+		return ret;
+	if (val && !INVALID_CMD(val))
+		return -EBUSY;
+
+	if (in_len) {
+		ret = regmap_raw_write(tps->regmap, TPS_REG_DATA1,
+				       in_data, in_len);
+		if (ret)
+			return ret;
+	}
+
+	ret = tps6598x_write_4cc(tps, TPS_REG_CMD1, cmd);
+	if (ret < 0)
+		return ret;
+
+	/* XXX: Using 1s for now, but it may not be enough for every command. */
+	timeout = jiffies + msecs_to_jiffies(1000);
+
+	do {
+		ret = tps6598x_read32(tps, TPS_REG_CMD1, &val);
+		if (ret)
+			return ret;
+		if (INVALID_CMD(val))
+			return -EINVAL;
+
+		if (time_is_before_jiffies(timeout))
+			return -ETIMEDOUT;
+	} while (val);
+
+	if (out_len) {
+		ret = regmap_raw_read(tps->regmap, TPS_REG_DATA1,
+				      out_data, out_len);
+		if (ret)
+			return ret;
+		val = out_data[0];
+	} else {
+		ret = regmap_read(tps->regmap, TPS_REG_DATA1, &val);
+		if (ret)
+			return ret;
+	}
+
+	switch (val) {
+	case TPS_TASK_TIMEOUT:
+		return -ETIMEDOUT;
+	case TPS_TASK_REJECTED:
+		return -EPERM;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int
+tps6598x_dr_set(const struct typec_capability *cap, enum typec_data_role role)
+{
+	struct tps6598x *tps = container_of(cap, struct tps6598x, typec_cap);
+	const char *cmd = (role == TYPEC_DEVICE) ? "SWUF" : "SWDF";
+	u32 status;
+	int ret;
+
+	mutex_lock(&tps->lock);
+
+	ret = tps6598x_exec_cmd(tps, cmd, 0, NULL, 0, NULL);
+	if (ret)
+		goto out_unlock;
+
+	ret = tps6598x_read32(tps, TPS_REG_STATUS, &status);
+	if (ret)
+		goto out_unlock;
+
+	if (role != TPS_STATUS_DATAROLE(status)) {
+		ret = -EPROTO;
+		goto out_unlock;
+	}
+
+	typec_set_data_role(tps->port, role);
+
+out_unlock:
+	mutex_unlock(&tps->lock);
+
+	return ret;
+}
+
+static int
+tps6598x_pr_set(const struct typec_capability *cap, enum typec_role role)
+{
+	struct tps6598x *tps = container_of(cap, struct tps6598x, typec_cap);
+	const char *cmd = (role == TYPEC_SINK) ? "SWSk" : "SWSr";
+	u32 status;
+	int ret;
+
+	mutex_lock(&tps->lock);
+
+	ret = tps6598x_exec_cmd(tps, cmd, 0, NULL, 0, NULL);
+	if (ret)
+		goto out_unlock;
+
+	ret = tps6598x_read32(tps, TPS_REG_STATUS, &status);
+	if (ret)
+		goto out_unlock;
+
+	if (role != TPS_STATUS_PORTROLE(status)) {
+		ret = -EPROTO;
+		goto out_unlock;
+	}
+
+	typec_set_pwr_role(tps->port, role);
+
+out_unlock:
+	mutex_unlock(&tps->lock);
+
+	return ret;
+}
+
+static irqreturn_t tps6598x_interrupt(int irq, void *data)
+{
+	struct tps6598x *tps = data;
+	u64 event1;
+	u64 event2;
+	u32 status;
+	int ret;
+
+	mutex_lock(&tps->lock);
+
+	ret = tps6598x_read64(tps, TPS_REG_INT_EVENT1, &event1);
+	ret |= tps6598x_read64(tps, TPS_REG_INT_EVENT2, &event2);
+	if (ret) {
+		dev_err(tps->dev, "%s: failed to read events\n", __func__);
+		goto err_unlock;
+	}
+
+	ret = tps6598x_read32(tps, TPS_REG_STATUS, &status);
+	if (ret) {
+		dev_err(tps->dev, "%s: failed to read status\n", __func__);
+		goto err_clear_ints;
+	}
+
+	/* Handle plug insert or removal */
+	if ((event1 | event2) & TPS_REG_INT_PLUG_EVENT) {
+		if (status & TPS_STATUS_PLUG_PRESENT) {
+			ret = tps6598x_connect(tps, status);
+			if (ret)
+				dev_err(tps->dev,
+					"failed to register partner\n");
+		} else {
+			tps6598x_disconnect(tps, status);
+		}
+	}
+
+err_clear_ints:
+	tps6598x_write64(tps, TPS_REG_INT_CLEAR1, event1);
+	tps6598x_write64(tps, TPS_REG_INT_CLEAR2, event2);
+
+err_unlock:
+	mutex_unlock(&tps->lock);
+
+	return IRQ_HANDLED;
+}
+
+static const struct regmap_config tps6598x_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0x7F,
+};
+
+static int tps6598x_probe(struct i2c_client *client)
+{
+	struct tps6598x *tps;
+	u32 status;
+	u32 conf;
+	u32 vid;
+	int ret;
+
+	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+	if (!tps)
+		return -ENOMEM;
+
+	mutex_init(&tps->lock);
+	tps->dev = &client->dev;
+
+	tps->regmap = devm_regmap_init_i2c(client, &tps6598x_regmap_config);
+	if (IS_ERR(tps->regmap))
+		return PTR_ERR(tps->regmap);
+
+	ret = tps6598x_read32(tps, 0, &vid);
+	if (ret < 0)
+		return ret;
+	if (!vid)
+		return -ENODEV;
+
+	ret = tps6598x_read32(tps, TPS_REG_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	ret = tps6598x_read32(tps, TPS_REG_SYSTEM_CONF, &conf);
+	if (ret < 0)
+		return ret;
+
+	switch (TPS_SYSCONF_PORTINFO(conf)) {
+	case TPS_PORTINFO_SINK_ACCESSORY:
+	case TPS_PORTINFO_SINK:
+		tps->typec_cap.type = TYPEC_PORT_UFP;
+		break;
+	case TPS_PORTINFO_DRP_UFP_DRD:
+	case TPS_PORTINFO_DRP_DFP_DRD:
+		tps->typec_cap.dr_set = tps6598x_dr_set;
+		/* fall through */
+	case TPS_PORTINFO_DRP_UFP:
+	case TPS_PORTINFO_DRP_DFP:
+		tps->typec_cap.pr_set = tps6598x_pr_set;
+		tps->typec_cap.type = TYPEC_PORT_DRP;
+		break;
+	case TPS_PORTINFO_SOURCE:
+		tps->typec_cap.type = TYPEC_PORT_DFP;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	tps->typec_cap.revision = USB_TYPEC_REV_1_2;
+	tps->typec_cap.pd_revision = 0x200;
+	tps->typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
+
+	tps->port = typec_register_port(&client->dev, &tps->typec_cap);
+	if (!tps->port)
+		return -ENODEV;
+
+	if (status & TPS_STATUS_PLUG_PRESENT) {
+		ret = tps6598x_connect(tps, status);
+		if (ret)
+			dev_err(&client->dev, "failed to register partner\n");
+	}
+
+	ret = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					tps6598x_interrupt,
+					IRQF_SHARED | IRQF_ONESHOT,
+					dev_name(&client->dev), tps);
+	if (ret) {
+		tps6598x_disconnect(tps, 0);
+		typec_unregister_port(tps->port);
+		return ret;
+	}
+
+	i2c_set_clientdata(client, tps);
+
+	return 0;
+}
+
+static int tps6598x_remove(struct i2c_client *client)
+{
+	struct tps6598x *tps = i2c_get_clientdata(client);
+
+	tps6598x_disconnect(tps, 0);
+	typec_unregister_port(tps->port);
+
+	return 0;
+}
+
+static const struct acpi_device_id tps6598x_acpi_match[] = {
+	{ "INT3515", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, tps6598x_acpi_match);
+
+static struct i2c_driver tps6598x_i2c_driver = {
+	.driver = {
+		.name = "tps6598x",
+		.acpi_match_table = tps6598x_acpi_match,
+	},
+	.probe_new = tps6598x_probe,
+	.remove = tps6598x_remove,
+};
+module_i2c_driver(tps6598x_i2c_driver);
+
+MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TI TPS6598x USB Power Delivery Controller Driver");
diff --git a/drivers/usb/typec/typec.c b/drivers/usb/typec/typec.c
index 24e355ba109d..735726ced602 100644
--- a/drivers/usb/typec/typec.c
+++ b/drivers/usb/typec/typec.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB Type-C Connector Class
  *
  * Copyright (C) 2017, Intel Corporation
  * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/device.h>
diff --git a/drivers/usb/typec/typec_wcove.c b/drivers/usb/typec/typec_wcove.c
index e9c4e784a9cb..a8d479eb221a 100644
--- a/drivers/usb/typec/typec_wcove.c
+++ b/drivers/usb/typec/typec_wcove.c
@@ -1,24 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
 /**
  * typec_wcove.c - WhiskeyCove PMIC USB Type-C PHY driver
  *
  * Copyright (C) 2017 Intel Corporation
  * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/acpi.h>
 #include <linux/module.h>
+#include <linux/usb/tcpm.h>
 #include <linux/interrupt.h>
-#include <linux/usb/typec.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/intel_soc_pmic.h>
 
 /* Register offsets */
 #define WCOVE_CHGRIRQ0		0x4e09
-#define WCOVE_PHYCTRL		0x5e07
 
 #define USBC_CONTROL1		0x7001
 #define USBC_CONTROL2		0x7002
@@ -28,22 +24,57 @@
 #define USBC_STATUS1		0x7007
 #define USBC_STATUS2		0x7008
 #define USBC_STATUS3		0x7009
+#define USBC_CC1		0x700a
+#define USBC_CC2		0x700b
+#define USBC_CC1_STATUS		0x700c
+#define USBC_CC2_STATUS		0x700d
 #define USBC_IRQ1		0x7015
 #define USBC_IRQ2		0x7016
 #define USBC_IRQMASK1		0x7017
 #define USBC_IRQMASK2		0x7018
+#define USBC_PDCFG2		0x701a
+#define USBC_PDCFG3		0x701b
+#define USBC_PDSTATUS		0x701c
+#define USBC_RXSTATUS		0x701d
+#define USBC_RXINFO		0x701e
+#define USBC_TXCMD		0x701f
+#define USBC_TXINFO		0x7020
+#define USBC_RX_DATA		0x7028
+#define USBC_TX_DATA		0x7047
 
 /* Register bits */
 
-#define USBC_CONTROL1_MODE_DRP(r)	(((r) & ~0x7) | 4)
+#define USBC_CONTROL1_MODE_MASK		0x3
+#define   USBC_CONTROL1_MODE_SNK	0
+#define   USBC_CONTROL1_MODE_SNKACC	1
+#define   USBC_CONTROL1_MODE_SRC	2
+#define   USBC_CONTROL1_MODE_SRCACC	3
+#define   USBC_CONTROL1_MODE_DRP	4
+#define   USBC_CONTROL1_MODE_DRPACC	5
+#define   USBC_CONTROL1_MODE_TEST	7
+#define USBC_CONTROL1_CURSRC_MASK	0xc
+#define   USBC_CONTROL1_CURSRC_UA_0	(0 << 3)
+#define   USBC_CONTROL1_CURSRC_UA_80	(1 << 3)
+#define   USBC_CONTROL1_CURSRC_UA_180	(2 << 3)
+#define   USBC_CONTROL1_CURSRC_UA_330	(3 << 3)
+#define USBC_CONTROL1_DRPTOGGLE_RANDOM	0xe0
 
 #define USBC_CONTROL2_UNATT_SNK		BIT(0)
 #define USBC_CONTROL2_UNATT_SRC		BIT(1)
 #define USBC_CONTROL2_DIS_ST		BIT(2)
 
+#define USBC_CONTROL3_DET_DIS		BIT(0)
 #define USBC_CONTROL3_PD_DIS		BIT(1)
+#define USBC_CONTROL3_RESETPHY		BIT(2)
 
+#define USBC_CC_CTRL_PU_EN		BIT(0)
 #define USBC_CC_CTRL_VCONN_EN		BIT(1)
+#define USBC_CC_CTRL_TX_EN		BIT(2)
+#define USBC_CC_CTRL_PD_EN		BIT(3)
+#define USBC_CC_CTRL_CDET_EN		BIT(4)
+#define USBC_CC_CTRL_RDET_EN		BIT(5)
+#define USBC_CC_CTRL_ADC_EN		BIT(6)
+#define USBC_CC_CTRL_VBUSOK		BIT(7)
 
 #define USBC_STATUS1_DET_ONGOING	BIT(6)
 #define USBC_STATUS1_RSLT(r)		((r) & 0xf)
@@ -61,6 +92,15 @@
 
 #define USBC_STATUS2_VBUS_REQ		BIT(5)
 
+#define UCSC_CC_STATUS_SNK_RP		BIT(0)
+#define UCSC_CC_STATUS_PWRDEFSNK	BIT(1)
+#define UCSC_CC_STATUS_PWR_1P5A_SNK	BIT(2)
+#define UCSC_CC_STATUS_PWR_3A_SNK	BIT(3)
+#define UCSC_CC_STATUS_SRC_RP		BIT(4)
+#define UCSC_CC_STATUS_RX(r)		(((r) >> 5) & 0x3)
+#define   USBC_CC_STATUS_RD		1
+#define   USBC_CC_STATUS_RA		2
+
 #define USBC_IRQ1_ADCDONE1		BIT(2)
 #define USBC_IRQ1_OVERTEMP		BIT(1)
 #define USBC_IRQ1_SHORT			BIT(0)
@@ -79,15 +119,44 @@
 				 USBC_IRQ2_RX_HR | USBC_IRQ2_RX_CR | \
 				 USBC_IRQ2_TX_SUCCESS | USBC_IRQ2_TX_FAIL)
 
+#define USBC_PDCFG2_SOP			BIT(0)
+#define USBC_PDCFG2_SOP_P		BIT(1)
+#define USBC_PDCFG2_SOP_PP		BIT(2)
+#define USBC_PDCFG2_SOP_P_DEBUG		BIT(3)
+#define USBC_PDCFG2_SOP_PP_DEBUG	BIT(4)
+
+#define USBC_PDCFG3_DATAROLE_SHIFT	1
+#define USBC_PDCFG3_SOP_SHIFT		2
+
+#define USBC_RXSTATUS_RXCLEAR		BIT(0)
+#define USBC_RXSTATUS_RXDATA		BIT(7)
+
+#define USBC_RXINFO_RXBYTES(i)		(((i) >> 3) & 0x1f)
+
+#define USBC_TXCMD_BUF_RDY		BIT(0)
+#define USBC_TXCMD_START		BIT(1)
+#define USBC_TXCMD_NOP			(0 << 5)
+#define USBC_TXCMD_MSG			(1 << 5)
+#define USBC_TXCMD_CR			(2 << 5)
+#define USBC_TXCMD_HR			(3 << 5)
+#define USBC_TXCMD_BIST			(4 << 5)
+
+#define USBC_TXINFO_RETRIES(d)		(d << 3)
+
 struct wcove_typec {
 	struct mutex lock; /* device lock */
 	struct device *dev;
 	struct regmap *regmap;
-	struct typec_port *port;
-	struct typec_capability cap;
-	struct typec_partner *partner;
+	guid_t guid;
+
+	bool vbus;
+
+	struct tcpc_dev tcpc;
+	struct tcpm_port *tcpm;
 };
 
+#define tcpc_to_wcove(_tcpc_) container_of(_tcpc_, struct wcove_typec, tcpc)
+
 enum wcove_typec_func {
 	WCOVE_FUNC_DRIVE_VBUS = 1,
 	WCOVE_FUNC_ORIENTATION,
@@ -105,8 +174,7 @@ enum wcove_typec_role {
 	WCOVE_ROLE_DEVICE,
 };
 
-static guid_t guid = GUID_INIT(0x482383f0, 0x2876, 0x4e49,
-			       0x86, 0x85, 0xdb, 0x66, 0x21, 0x1a, 0xf0, 0x37);
+#define WCOVE_DSM_UUID		"482383f0-2876-4e49-8685-db66211af037"
 
 static int wcove_typec_func(struct wcove_typec *wcove,
 			    enum wcove_typec_func func, int param)
@@ -118,7 +186,7 @@ static int wcove_typec_func(struct wcove_typec *wcove,
 	tmp.type = ACPI_TYPE_INTEGER;
 	tmp.integer.value = param;
 
-	obj = acpi_evaluate_dsm(ACPI_HANDLE(wcove->dev), &guid, 1, func,
+	obj = acpi_evaluate_dsm(ACPI_HANDLE(wcove->dev), &wcove->guid, 1, func,
 				&argv4);
 	if (!obj) {
 		dev_err(wcove->dev, "%s: failed to evaluate _DSM\n", __func__);
@@ -129,158 +197,349 @@ static int wcove_typec_func(struct wcove_typec *wcove,
 	return 0;
 }
 
-static irqreturn_t wcove_typec_irq(int irq, void *data)
+static int wcove_init(struct tcpc_dev *tcpc)
 {
-	enum typec_role role = TYPEC_SINK;
-	struct typec_partner_desc partner;
-	struct wcove_typec *wcove = data;
-	unsigned int cc1_ctrl;
-	unsigned int cc2_ctrl;
-	unsigned int cc_irq1;
-	unsigned int cc_irq2;
-	unsigned int status1;
-	unsigned int status2;
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
 	int ret;
 
-	mutex_lock(&wcove->lock);
-
-	ret = regmap_read(wcove->regmap, USBC_IRQ1, &cc_irq1);
+	/* Unmask everything */
+	ret = regmap_write(wcove->regmap, USBC_IRQMASK1, 0);
 	if (ret)
-		goto err;
+		return ret;
 
-	ret = regmap_read(wcove->regmap, USBC_IRQ2, &cc_irq2);
-	if (ret)
-		goto err;
+	return regmap_write(wcove->regmap, USBC_IRQMASK2, 0);
+}
 
-	ret = regmap_read(wcove->regmap, USBC_STATUS1, &status1);
-	if (ret)
-		goto err;
+static int wcove_get_vbus(struct tcpc_dev *tcpc)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
+	unsigned int cc1ctrl;
+	int ret;
 
-	ret = regmap_read(wcove->regmap, USBC_STATUS2, &status2);
+	ret = regmap_read(wcove->regmap, USBC_CC1_CTRL, &cc1ctrl);
 	if (ret)
-		goto err;
+		return ret;
 
-	ret = regmap_read(wcove->regmap, USBC_CC1_CTRL, &cc1_ctrl);
-	if (ret)
-		goto err;
+	wcove->vbus = !!(cc1ctrl & USBC_CC_CTRL_VBUSOK);
 
-	ret = regmap_read(wcove->regmap, USBC_CC2_CTRL, &cc2_ctrl);
-	if (ret)
-		goto err;
+	return wcove->vbus;
+}
 
-	if (cc_irq1) {
-		if (cc_irq1 & USBC_IRQ1_OVERTEMP)
-			dev_err(wcove->dev, "VCONN Switch Over Temperature!\n");
-		if (cc_irq1 & USBC_IRQ1_SHORT)
-			dev_err(wcove->dev, "VCONN Switch Short Circuit!\n");
-		ret = regmap_write(wcove->regmap, USBC_IRQ1, cc_irq1);
-		if (ret)
-			goto err;
-	}
+static int wcove_set_vbus(struct tcpc_dev *tcpc, bool on, bool sink)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
 
-	if (cc_irq2) {
-		ret = regmap_write(wcove->regmap, USBC_IRQ2, cc_irq2);
-		if (ret)
-			goto err;
-		/*
-		 * Ignoring any PD communication interrupts until the PD support
-		 * is available
-		 */
-		if (cc_irq2 & ~USBC_IRQ2_CC_CHANGE) {
-			dev_WARN(wcove->dev, "USB PD handling missing\n");
-			goto err;
+	return wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VBUS, on);
+}
+
+static int wcove_set_vconn(struct tcpc_dev *tcpc, bool on)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
+
+	return wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, on);
+}
+
+static enum typec_cc_status wcove_to_typec_cc(unsigned int cc)
+{
+	if (cc & UCSC_CC_STATUS_SNK_RP) {
+		if (cc & UCSC_CC_STATUS_PWRDEFSNK)
+			return TYPEC_CC_RP_DEF;
+		else if (cc & UCSC_CC_STATUS_PWR_1P5A_SNK)
+			return TYPEC_CC_RP_1_5;
+		else if (cc & UCSC_CC_STATUS_PWR_3A_SNK)
+			return TYPEC_CC_RP_3_0;
+	} else {
+		switch (UCSC_CC_STATUS_RX(cc)) {
+		case USBC_CC_STATUS_RD:
+			return TYPEC_CC_RD;
+		case USBC_CC_STATUS_RA:
+			return TYPEC_CC_RA;
+		default:
+			break;
 		}
 	}
+	return TYPEC_CC_OPEN;
+}
 
-	if (status1 & USBC_STATUS1_DET_ONGOING)
-		goto out;
+static int wcove_get_cc(struct tcpc_dev *tcpc, enum typec_cc_status *cc1,
+			enum typec_cc_status *cc2)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
+	unsigned int cc1_status;
+	unsigned int cc2_status;
+	int ret;
 
-	if (USBC_STATUS1_RSLT(status1) == USBC_RSLT_NOTHING) {
-		if (wcove->partner) {
-			typec_unregister_partner(wcove->partner);
-			wcove->partner = NULL;
-		}
+	ret = regmap_read(wcove->regmap, USBC_CC1_STATUS, &cc1_status);
+	if (ret)
+		return ret;
 
-		wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION,
-				 WCOVE_ORIENTATION_NORMAL);
+	ret = regmap_read(wcove->regmap, USBC_CC2_STATUS, &cc2_status);
+	if (ret)
+		return ret;
 
-		/* This makes sure the device controller is disconnected */
-		wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_HOST);
+	*cc1 = wcove_to_typec_cc(cc1_status);
+	*cc2 = wcove_to_typec_cc(cc2_status);
 
-		/* Port to default role */
-		typec_set_data_role(wcove->port, TYPEC_DEVICE);
-		typec_set_pwr_role(wcove->port, TYPEC_SINK);
-		typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_USB);
+	return 0;
+}
 
-		goto out;
-	}
+static int wcove_set_cc(struct tcpc_dev *tcpc, enum typec_cc_status cc)
+{
+	/* XXX: Relying on the HW FSM to configure things correctly for now */
+	return 0;
+}
 
-	if (wcove->partner)
-		goto out;
+static int wcove_set_polarity(struct tcpc_dev *tcpc, enum typec_cc_polarity pol)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
 
-	switch (USBC_STATUS1_ORIENT(status1)) {
-	case USBC_ORIENT_NORMAL:
-		wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION,
-				 WCOVE_ORIENTATION_NORMAL);
-		break;
-	case USBC_ORIENT_REVERSE:
-		wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION,
-				 WCOVE_ORIENTATION_REVERSE);
-	default:
-		break;
+	return wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION, pol);
+}
+
+static int wcove_set_current_limit(struct tcpc_dev *tcpc, u32 max_ma, u32 mv)
+{
+	return 0;
+}
+
+static int wcove_set_roles(struct tcpc_dev *tcpc, bool attached,
+			   enum typec_role role, enum typec_data_role data)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
+	unsigned int val;
+	int ret;
+
+	ret = wcove_typec_func(wcove, WCOVE_FUNC_ROLE, data == TYPEC_HOST ?
+			       WCOVE_ROLE_HOST : WCOVE_ROLE_DEVICE);
+	if (ret)
+		return ret;
+
+	val = role;
+	val |= data << USBC_PDCFG3_DATAROLE_SHIFT;
+	val |= PD_REV20 << USBC_PDCFG3_SOP_SHIFT;
+
+	return regmap_write(wcove->regmap, USBC_PDCFG3, val);
+}
+
+static int wcove_set_pd_rx(struct tcpc_dev *tcpc, bool on)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
+
+	return regmap_write(wcove->regmap, USBC_PDCFG2,
+			    on ? USBC_PDCFG2_SOP : 0);
+}
+
+static int wcove_pd_transmit(struct tcpc_dev *tcpc,
+			     enum tcpm_transmit_type type,
+			     const struct pd_message *msg)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
+	unsigned int info = 0;
+	unsigned int cmd;
+	int ret;
+
+	ret = regmap_read(wcove->regmap, USBC_TXCMD, &cmd);
+	if (ret)
+		return ret;
+
+	if (!(cmd & USBC_TXCMD_BUF_RDY)) {
+		dev_warn(wcove->dev, "%s: Last transmission still ongoing!",
+			 __func__);
+		return -EBUSY;
 	}
 
-	memset(&partner, 0, sizeof(partner));
+	if (msg) {
+		const u8 *data = (void *)msg;
+		int i;
+
+		for (i = 0; i < pd_header_cnt(msg->header) * 4 + 2; i++) {
+			ret = regmap_write(wcove->regmap, USBC_TX_DATA + i,
+					   data[i]);
+			if (ret)
+				return ret;
+		}
+	}
 
-	switch (USBC_STATUS1_RSLT(status1)) {
-	case USBC_RSLT_SRC_DEFAULT:
-		typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_USB);
+	switch (type) {
+	case TCPC_TX_SOP:
+	case TCPC_TX_SOP_PRIME:
+	case TCPC_TX_SOP_PRIME_PRIME:
+	case TCPC_TX_SOP_DEBUG_PRIME:
+	case TCPC_TX_SOP_DEBUG_PRIME_PRIME:
+		info = type + 1;
+		cmd = USBC_TXCMD_MSG;
 		break;
-	case USBC_RSLT_SRC_1_5A:
-		typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_1_5A);
+	case TCPC_TX_HARD_RESET:
+		cmd = USBC_TXCMD_HR;
 		break;
-	case USBC_RSLT_SRC_3_0A:
-		typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_3_0A);
+	case TCPC_TX_CABLE_RESET:
+		cmd = USBC_TXCMD_CR;
 		break;
-	case USBC_RSLT_SNK:
-		role = TYPEC_SOURCE;
+	case TCPC_TX_BIST_MODE_2:
+		cmd = USBC_TXCMD_BIST;
 		break;
-	case USBC_RSLT_DEBUG_ACC:
-		partner.accessory = TYPEC_ACCESSORY_DEBUG;
+	default:
+		return -EINVAL;
+	}
+
+	/* NOTE Setting maximum number of retries (7) */
+	ret = regmap_write(wcove->regmap, USBC_TXINFO,
+			   info | USBC_TXINFO_RETRIES(7));
+	if (ret)
+		return ret;
+
+	return regmap_write(wcove->regmap, USBC_TXCMD, cmd | USBC_TXCMD_START);
+}
+
+static int wcove_start_drp_toggling(struct tcpc_dev *tcpc,
+				    enum typec_cc_status cc)
+{
+	struct wcove_typec *wcove = tcpc_to_wcove(tcpc);
+	unsigned int usbc_ctrl;
+
+	usbc_ctrl = USBC_CONTROL1_MODE_DRP | USBC_CONTROL1_DRPTOGGLE_RANDOM;
+
+	switch (cc) {
+	case TYPEC_CC_RP_1_5:
+		usbc_ctrl |= USBC_CONTROL1_CURSRC_UA_180;
 		break;
-	case USBC_RSLT_AUDIO_ACC:
-		partner.accessory = TYPEC_ACCESSORY_AUDIO;
+	case TYPEC_CC_RP_3_0:
+		usbc_ctrl |= USBC_CONTROL1_CURSRC_UA_330;
 		break;
 	default:
-		dev_WARN(wcove->dev, "%s Undefined result\n", __func__);
-		goto err;
+		usbc_ctrl |= USBC_CONTROL1_CURSRC_UA_80;
+		break;
 	}
 
-	if (role == TYPEC_SINK) {
-		wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_DEVICE);
-		typec_set_data_role(wcove->port, TYPEC_DEVICE);
-		typec_set_pwr_role(wcove->port, TYPEC_SINK);
-	} else {
-		wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_HOST);
-		typec_set_pwr_role(wcove->port, TYPEC_SOURCE);
-		typec_set_data_role(wcove->port, TYPEC_HOST);
+	return regmap_write(wcove->regmap, USBC_CONTROL1, usbc_ctrl);
+}
+
+static int wcove_read_rx_buffer(struct wcove_typec *wcove, void *msg)
+{
+	unsigned int info;
+	int ret;
+	int i;
+
+	ret = regmap_read(wcove->regmap, USBC_RXINFO, &info);
+	if (ret)
+		return ret;
+
+	/* FIXME: Check that USBC_RXINFO_RXBYTES(info) matches the header */
+
+	for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++) {
+		ret = regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i);
+		if (ret)
+			return ret;
 	}
 
-	wcove->partner = typec_register_partner(wcove->port, &partner);
-	if (!wcove->partner)
-		dev_err(wcove->dev, "failed register partner\n");
-out:
-	/* If either CC pins is requesting VCONN, we turn it on */
-	if ((cc1_ctrl & USBC_CC_CTRL_VCONN_EN) ||
-	    (cc2_ctrl &	USBC_CC_CTRL_VCONN_EN))
-		wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, true);
-	else
+	return regmap_write(wcove->regmap, USBC_RXSTATUS,
+			    USBC_RXSTATUS_RXCLEAR);
+}
+
+static irqreturn_t wcove_typec_irq(int irq, void *data)
+{
+	struct wcove_typec *wcove = data;
+	unsigned int usbc_irq1 = 0;
+	unsigned int usbc_irq2 = 0;
+	unsigned int cc1ctrl;
+	int ret;
+
+	mutex_lock(&wcove->lock);
+
+	/* Read.. */
+	ret = regmap_read(wcove->regmap, USBC_IRQ1, &usbc_irq1);
+	if (ret)
+		goto err;
+
+	ret = regmap_read(wcove->regmap, USBC_IRQ2, &usbc_irq2);
+	if (ret)
+		goto err;
+
+	ret = regmap_read(wcove->regmap, USBC_CC1_CTRL, &cc1ctrl);
+	if (ret)
+		goto err;
+
+	if (!wcove->tcpm)
+		goto err;
+
+	/* ..check.. */
+	if (usbc_irq1 & USBC_IRQ1_OVERTEMP) {
+		dev_err(wcove->dev, "VCONN Switch Over Temperature!\n");
+		wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, false);
+		/* REVISIT: Report an error? */
+	}
+
+	if (usbc_irq1 & USBC_IRQ1_SHORT) {
+		dev_err(wcove->dev, "VCONN Switch Short Circuit!\n");
 		wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, false);
+		/* REVISIT: Report an error? */
+	}
+
+	if (wcove->vbus != !!(cc1ctrl & USBC_CC_CTRL_VBUSOK))
+		tcpm_vbus_change(wcove->tcpm);
+
+	/* REVISIT: See if tcpm code can be made to consider Type-C HW FSMs */
+	if (usbc_irq2 & USBC_IRQ2_CC_CHANGE)
+		tcpm_cc_change(wcove->tcpm);
+
+	if (usbc_irq2 & USBC_IRQ2_RX_PD) {
+		unsigned int status;
+
+		/*
+		 * FIXME: Need to check if TX is ongoing and report
+		 * TX_DIREGARDED if needed?
+		 */
+
+		ret = regmap_read(wcove->regmap, USBC_RXSTATUS, &status);
+		if (ret)
+			goto err;
+
+		/* Flush all buffers */
+		while (status & USBC_RXSTATUS_RXDATA) {
+			struct pd_message msg;
+
+			ret = wcove_read_rx_buffer(wcove, &msg);
+			if (ret) {
+				dev_err(wcove->dev, "%s: RX read failed\n",
+					__func__);
+				goto err;
+			}
+
+			tcpm_pd_receive(wcove->tcpm, &msg);
+
+			ret = regmap_read(wcove->regmap, USBC_RXSTATUS,
+					  &status);
+			if (ret)
+				goto err;
+		}
+	}
+
+	if (usbc_irq2 & USBC_IRQ2_RX_HR)
+		tcpm_pd_hard_reset(wcove->tcpm);
+
+	/* REVISIT: if (usbc_irq2 & USBC_IRQ2_RX_CR) */
+
+	if (usbc_irq2 & USBC_IRQ2_TX_SUCCESS)
+		tcpm_pd_transmit_complete(wcove->tcpm, TCPC_TX_SUCCESS);
+
+	if (usbc_irq2 & USBC_IRQ2_TX_FAIL)
+		tcpm_pd_transmit_complete(wcove->tcpm, TCPC_TX_FAILED);
 
-	/* Relying on the FSM to know when we need to drive VBUS. */
-	wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VBUS,
-			 !!(status2 & USBC_STATUS2_VBUS_REQ));
 err:
+	/* ..and clear. */
+	if (usbc_irq1) {
+		ret = regmap_write(wcove->regmap, USBC_IRQ1, usbc_irq1);
+		if (ret)
+			dev_WARN(wcove->dev, "%s failed to clear IRQ1\n",
+				 __func__);
+	}
+
+	if (usbc_irq2) {
+		ret = regmap_write(wcove->regmap, USBC_IRQ2, usbc_irq2);
+		if (ret)
+			dev_WARN(wcove->dev, "%s failed to clear IRQ2\n",
+				 __func__);
+	}
+
 	/* REVISIT: Clear WhiskeyCove CHGR Type-C interrupt */
 	regmap_write(wcove->regmap, WCOVE_CHGRIRQ0, BIT(5));
 
@@ -288,11 +547,41 @@ err:
 	return IRQ_HANDLED;
 }
 
+/*
+ * The following power levels should be safe to use with Joule board.
+ */
+static const u32 src_pdo[] = {
+	PDO_FIXED(5000, 1500, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP |
+		  PDO_FIXED_USB_COMM),
+};
+
+static const u32 snk_pdo[] = {
+	PDO_FIXED(12000, 3000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP |
+		  PDO_FIXED_USB_COMM),
+	PDO_BATT(4750, 12000, 15000),
+	PDO_VAR(4750, 12000, 3000),
+};
+
+static struct tcpc_config wcove_typec_config = {
+	.src_pdo = src_pdo,
+	.nr_src_pdo = ARRAY_SIZE(src_pdo),
+	.snk_pdo = snk_pdo,
+	.nr_snk_pdo = ARRAY_SIZE(snk_pdo),
+
+	.max_snk_mv = 12000,
+	.max_snk_ma = 3000,
+	.max_snk_mw = 36000,
+	.operating_snk_mw = 15000,
+
+	.type = TYPEC_PORT_DRP,
+	.default_role = TYPEC_SINK,
+};
+
 static int wcove_typec_probe(struct platform_device *pdev)
 {
 	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
 	struct wcove_typec *wcove;
-	unsigned int val;
+	int irq;
 	int ret;
 
 	wcove = devm_kzalloc(&pdev->dev, sizeof(*wcove), GFP_KERNEL);
@@ -303,43 +592,47 @@ static int wcove_typec_probe(struct platform_device *pdev)
 	wcove->dev = &pdev->dev;
 	wcove->regmap = pmic->regmap;
 
-	ret = regmap_irq_get_virq(pmic->irq_chip_data_chgr,
+	irq = regmap_irq_get_virq(pmic->irq_chip_data_chgr,
 				  platform_get_irq(pdev, 0));
-	if (ret < 0)
-		return ret;
+	if (irq < 0)
+		return irq;
 
-	ret = devm_request_threaded_irq(&pdev->dev, ret, NULL,
-					wcove_typec_irq, IRQF_ONESHOT,
-					"wcove_typec", wcove);
+	ret = guid_parse(WCOVE_DSM_UUID, &wcove->guid);
 	if (ret)
 		return ret;
 
-	if (!acpi_check_dsm(ACPI_HANDLE(&pdev->dev), &guid, 0, 0x1f)) {
+	if (!acpi_check_dsm(ACPI_HANDLE(&pdev->dev), &wcove->guid, 0, 0x1f)) {
 		dev_err(&pdev->dev, "Missing _DSM functions\n");
 		return -ENODEV;
 	}
 
-	wcove->cap.type = TYPEC_PORT_DRP;
-	wcove->cap.revision = USB_TYPEC_REV_1_1;
-	wcove->cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
+	wcove->tcpc.init = wcove_init;
+	wcove->tcpc.get_vbus = wcove_get_vbus;
+	wcove->tcpc.set_vbus = wcove_set_vbus;
+	wcove->tcpc.set_cc = wcove_set_cc;
+	wcove->tcpc.get_cc = wcove_get_cc;
+	wcove->tcpc.set_polarity = wcove_set_polarity;
+	wcove->tcpc.set_vconn = wcove_set_vconn;
+	wcove->tcpc.set_current_limit = wcove_set_current_limit;
+	wcove->tcpc.start_drp_toggling = wcove_start_drp_toggling;
 
-	/* Make sure the PD PHY is disabled until USB PD is available */
-	regmap_read(wcove->regmap, USBC_CONTROL3, &val);
-	regmap_write(wcove->regmap, USBC_CONTROL3, val | USBC_CONTROL3_PD_DIS);
+	wcove->tcpc.set_pd_rx = wcove_set_pd_rx;
+	wcove->tcpc.set_roles = wcove_set_roles;
+	wcove->tcpc.pd_transmit = wcove_pd_transmit;
 
-	/* DRP mode without accessory support */
-	regmap_read(wcove->regmap, USBC_CONTROL1, &val);
-	regmap_write(wcove->regmap, USBC_CONTROL1, USBC_CONTROL1_MODE_DRP(val));
+	wcove->tcpc.config = &wcove_typec_config;
 
-	wcove->port = typec_register_port(&pdev->dev, &wcove->cap);
-	if (!wcove->port)
-		return -ENODEV;
+	wcove->tcpm = tcpm_register_port(wcove->dev, &wcove->tcpc);
+	if (IS_ERR(wcove->tcpm))
+		return PTR_ERR(wcove->tcpm);
 
-	/* Unmask everything */
-	regmap_read(wcove->regmap, USBC_IRQMASK1, &val);
-	regmap_write(wcove->regmap, USBC_IRQMASK1, val & ~USBC_IRQMASK1_ALL);
-	regmap_read(wcove->regmap, USBC_IRQMASK2, &val);
-	regmap_write(wcove->regmap, USBC_IRQMASK2, val & ~USBC_IRQMASK2_ALL);
+	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+					wcove_typec_irq, IRQF_ONESHOT,
+					"wcove_typec", wcove);
+	if (ret) {
+		tcpm_unregister_port(wcove->tcpm);
+		return ret;
+	}
 
 	platform_set_drvdata(pdev, wcove);
 	return 0;
@@ -356,8 +649,8 @@ static int wcove_typec_remove(struct platform_device *pdev)
 	regmap_read(wcove->regmap, USBC_IRQMASK2, &val);
 	regmap_write(wcove->regmap, USBC_IRQMASK2, val | USBC_IRQMASK2_ALL);
 
-	typec_unregister_partner(wcove->partner);
-	typec_unregister_port(wcove->port);
+	tcpm_unregister_port(wcove->tcpm);
+
 	return 0;
 }
 
diff --git a/drivers/usb/typec/ucsi/trace.c b/drivers/usb/typec/ucsi/trace.c
index 006f65c72a34..d9a6ff6e673c 100644
--- a/drivers/usb/typec/ucsi/trace.c
+++ b/drivers/usb/typec/ucsi/trace.c
@@ -1,2 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0
 #define CREATE_TRACE_POINTS
 #include "trace.h"
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 714c5bcedf2b..79046fe66426 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB Type-C Connector System Software Interface driver
  *
  * Copyright (C) 2017, Intel Corporation
  * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/completion.h>
diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c
index cabd47612b0a..44eb4e1ea817 100644
--- a/drivers/usb/typec/ucsi/ucsi_acpi.c
+++ b/drivers/usb/typec/ucsi/ucsi_acpi.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * UCSI ACPI driver
  *
  * Copyright (C) 2017, Intel Corporation
  * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/platform_device.h>
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index bb0bd732e29a..26ca0ec01fd5 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -1,15 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB Skeleton driver - 2.2
  *
  * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
  *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- *
  * This driver is based on the 2.6.3 version of drivers/usb/usb-skeleton.c
  * but has been rewritten to be easier to read and use.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/usbip/stub.h b/drivers/usb/usbip/stub.h
index 910f027773aa..14a72357800a 100644
--- a/drivers/usb/usbip/stub.h
+++ b/drivers/usb/usbip/stub.h
@@ -1,20 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2003-2008 Takahiro Hirofuchi
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
- * USA.
  */
 
 #ifndef __USBIP_STUB_H
diff --git a/drivers/usb/usbip/stub_dev.c b/drivers/usb/usbip/stub_dev.c
index c653ce533430..a3df8ee82faf 100644
--- a/drivers/usb/usbip/stub_dev.c
+++ b/drivers/usb/usbip/stub_dev.c
@@ -1,20 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2003-2008 Takahiro Hirofuchi
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
- * USA.
  */
 
 #include <linux/device.h>
diff --git a/drivers/usb/usbip/stub_main.c b/drivers/usb/usbip/stub_main.c
index 7170404e8979..4f48b306713f 100644
--- a/drivers/usb/usbip/stub_main.c
+++ b/drivers/usb/usbip/stub_main.c
@@ -1,20 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2003-2008 Takahiro Hirofuchi
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
- * USA.
  */
 
 #include <linux/string.h>
diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c
index 191b176ffedf..536e037f541f 100644
--- a/drivers/usb/usbip/stub_rx.c
+++ b/drivers/usb/usbip/stub_rx.c
@@ -1,20 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2003-2008 Takahiro Hirofuchi
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
- * USA.
  */
 
 #include <asm/byteorder.h>
diff --git a/drivers/usb/usbip/stub_tx.c b/drivers/usb/usbip/stub_tx.c
index be50cef645d8..b18bce96c212 100644
--- a/drivers/usb/usbip/stub_tx.c
+++ b/drivers/usb/usbip/stub_tx.c
@@ -1,20 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2003-2008 Takahiro Hirofuchi
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
- * USA.
  */
 
 #include <linux/kthread.h>
diff --git a/drivers/usb/usbip/usbip_common.c b/drivers/usb/usbip/usbip_common.c
index 2281f3562870..f7978933b402 100644
--- a/drivers/usb/usbip/usbip_common.c
+++ b/drivers/usb/usbip/usbip_common.c
@@ -1,22 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2003-2008 Takahiro Hirofuchi
  * Copyright (C) 2015-2016 Samsung Electronics
  *               Krzysztof Opasiak <k.opasiak@samsung.com>
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
- * USA.
  */
 
 #include <asm/byteorder.h>
diff --git a/drivers/usb/usbip/usbip_common.h b/drivers/usb/usbip/usbip_common.h
index 3050fc99a417..e5de35c8c505 100644
--- a/drivers/usb/usbip/usbip_common.h
+++ b/drivers/usb/usbip/usbip_common.h
@@ -1,22 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2003-2008 Takahiro Hirofuchi
  * Copyright (C) 2015-2016 Samsung Electronics
  *               Krzysztof Opasiak <k.opasiak@samsung.com>
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
- * USA.
  */
 
 #ifndef __USBIP_COMMON_H
diff --git a/drivers/usb/usbip/usbip_event.c b/drivers/usb/usbip/usbip_event.c
index f1635662c299..5b4c0864ad92 100644
--- a/drivers/usb/usbip/usbip_event.c
+++ b/drivers/usb/usbip/usbip_event.c
@@ -1,21 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2003-2008 Takahiro Hirofuchi
  * Copyright (C) 2015 Nobuo Iwata
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
- * USA.
  */
 
 #include <linux/kthread.h>
diff --git a/drivers/usb/usbip/vhci.h b/drivers/usb/usbip/vhci.h
index 5cfb59e98e44..5659dce1526e 100644
--- a/drivers/usb/usbip/vhci.h
+++ b/drivers/usb/usbip/vhci.h
@@ -1,12 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2003-2008 Takahiro Hirofuchi
  * Copyright (C) 2015 Nobuo Iwata
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
  */
 
 #ifndef __USBIP_VHCI_H
diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 11b9a22799cc..713e94170963 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -1,21 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2003-2008 Takahiro Hirofuchi
  * Copyright (C) 2015-2016 Nobuo Iwata
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
- * USA.
  */
 
 #include <linux/init.h>
diff --git a/drivers/usb/usbip/vhci_rx.c b/drivers/usb/usbip/vhci_rx.c
index ef2f2d5ca6b2..90577e8b2282 100644
--- a/drivers/usb/usbip/vhci_rx.c
+++ b/drivers/usb/usbip/vhci_rx.c
@@ -1,20 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2003-2008 Takahiro Hirofuchi
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
- * USA.
  */
 
 #include <linux/kthread.h>
diff --git a/drivers/usb/usbip/vhci_sysfs.c b/drivers/usb/usbip/vhci_sysfs.c
index 1b9f60a22e0b..e78f7472cac4 100644
--- a/drivers/usb/usbip/vhci_sysfs.c
+++ b/drivers/usb/usbip/vhci_sysfs.c
@@ -1,21 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2003-2008 Takahiro Hirofuchi
  * Copyright (C) 2015-2016 Nobuo Iwata
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
- * USA.
  */
 
 #include <linux/kthread.h>
diff --git a/drivers/usb/usbip/vhci_tx.c b/drivers/usb/usbip/vhci_tx.c
index 3e7878fe2fd4..d625a2ff4b71 100644
--- a/drivers/usb/usbip/vhci_tx.c
+++ b/drivers/usb/usbip/vhci_tx.c
@@ -1,20 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2003-2008 Takahiro Hirofuchi
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
- * USA.
  */
 
 #include <linux/kthread.h>
diff --git a/drivers/usb/usbip/vudc.h b/drivers/usb/usbip/vudc.h
index 25e01b09c4c3..cf968192e59f 100644
--- a/drivers/usb/usbip/vudc.h
+++ b/drivers/usb/usbip/vudc.h
@@ -1,21 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2015 Karol Kosik <karo9@interia.eu>
  * Copyright (C) 2015-2016 Samsung Electronics
  *               Igor Kotrasinski <i.kotrasinsk@samsung.com>
  *               Krzysztof Opasiak <k.opasiak@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
  */
 
 #ifndef __USBIP_VUDC_H
@@ -104,7 +92,7 @@ struct vudc {
 
 	struct usbip_device ud;
 	struct transfer_timer tr_timer;
-	struct timeval start_time;
+	struct timespec64 start_time;
 
 	struct list_head urb_queue;
 
diff --git a/drivers/usb/usbip/vudc_dev.c b/drivers/usb/usbip/vudc_dev.c
index 968471b62cbc..1b9a4f87db59 100644
--- a/drivers/usb/usbip/vudc_dev.c
+++ b/drivers/usb/usbip/vudc_dev.c
@@ -1,21 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2015 Karol Kosik <karo9@interia.eu>
  * Copyright (C) 2015-2016 Samsung Electronics
  *               Igor Kotrasinski <i.kotrasinsk@samsung.com>
  *               Krzysztof Opasiak <k.opasiak@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
  */
 
 #include <linux/device.h>
@@ -135,16 +123,15 @@ struct vep *vudc_find_endpoint(struct vudc *udc, u8 address)
 
 /* gadget ops */
 
-/* FIXME - this will probably misbehave when suspend/resume is added */
 static int vgadget_get_frame(struct usb_gadget *_gadget)
 {
-	struct timeval now;
+	struct timespec64 now;
 	struct vudc *udc = usb_gadget_to_vudc(_gadget);
 
-	do_gettimeofday(&now);
+	ktime_get_ts64(&now);
 	return ((now.tv_sec - udc->start_time.tv_sec) * 1000 +
-			(now.tv_usec - udc->start_time.tv_usec) / 1000)
-			% 0x7FF;
+		(now.tv_nsec - udc->start_time.tv_nsec) / NSEC_PER_MSEC)
+			& 0x7FF;
 }
 
 static int vgadget_set_selfpowered(struct usb_gadget *_gadget, int value)
diff --git a/drivers/usb/usbip/vudc_main.c b/drivers/usb/usbip/vudc_main.c
index 9e655714e389..3fc22037a82f 100644
--- a/drivers/usb/usbip/vudc_main.c
+++ b/drivers/usb/usbip/vudc_main.c
@@ -1,21 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2015 Karol Kosik <karo9@interia.eu>
  * Copyright (C) 2015-2016 Samsung Electronics
  *               Igor Kotrasinski <i.kotrasinsk@samsung.com>
  *               Krzysztof Opasiak <k.opasiak@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
  */
 
 #include <linux/device.h>
diff --git a/drivers/usb/usbip/vudc_rx.c b/drivers/usb/usbip/vudc_rx.c
index e429b59f6f8a..df1e30989148 100644
--- a/drivers/usb/usbip/vudc_rx.c
+++ b/drivers/usb/usbip/vudc_rx.c
@@ -1,20 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2015 Karol Kosik <karo9@interia.eu>
  * Copyright (C) 2015-2016 Samsung Electronics
  *               Igor Kotrasinski <i.kotrasinsk@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
  */
 
 #include <net/sock.h>
diff --git a/drivers/usb/usbip/vudc_sysfs.c b/drivers/usb/usbip/vudc_sysfs.c
index 0f98f2c7475f..1adc8af292ec 100644
--- a/drivers/usb/usbip/vudc_sysfs.c
+++ b/drivers/usb/usbip/vudc_sysfs.c
@@ -1,21 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2015 Karol Kosik <karo9@interia.eu>
  * Copyright (C) 2015-2016 Samsung Electronics
  *               Igor Kotrasinski <i.kotrasinsk@samsung.com>
  *               Krzysztof Opasiak <k.opasiak@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
  */
 
 #include <linux/device.h>
@@ -161,7 +149,7 @@ static ssize_t store_sockfd(struct device *dev, struct device_attribute *attr,
 		udc->ud.status = SDEV_ST_USED;
 		spin_unlock_irq(&udc->ud.lock);
 
-		do_gettimeofday(&udc->start_time);
+		ktime_get_ts64(&udc->start_time);
 		v_start_timer(udc);
 		udc->connected = 1;
 	} else {
diff --git a/drivers/usb/usbip/vudc_transfer.c b/drivers/usb/usbip/vudc_transfer.c
index 4cfd475ee865..c9db846ee4f6 100644
--- a/drivers/usb/usbip/vudc_transfer.c
+++ b/drivers/usb/usbip/vudc_transfer.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2015 Karol Kosik <karo9@interia.eu>
  * Copyright (C) 2015-2016 Samsung Electronics
@@ -6,19 +7,6 @@
  * Based on dummy_hcd.c, which is:
  * Copyright (C) 2003 David Brownell
  * Copyright (C) 2003-2005 Alan Stern
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
  */
 
 #include <linux/usb.h>
@@ -311,9 +299,9 @@ top:
 	return sent;
 }
 
-static void v_timer(unsigned long _vudc)
+static void v_timer(struct timer_list *t)
 {
-	struct vudc *udc = (struct vudc *) _vudc;
+	struct vudc *udc = from_timer(udc, t, tr_timer.timer);
 	struct transfer_timer *timer = &udc->tr_timer;
 	struct urbp *urb_p, *tmp;
 	unsigned long flags;
@@ -459,7 +447,7 @@ void v_init_timer(struct vudc *udc)
 {
 	struct transfer_timer *t = &udc->tr_timer;
 
-	setup_timer(&t->timer, v_timer, (unsigned long) udc);
+	timer_setup(&t->timer, v_timer, 0);
 	t->state = VUDC_TR_STOPPED;
 }
 
diff --git a/drivers/usb/usbip/vudc_tx.c b/drivers/usb/usbip/vudc_tx.c
index 234661782fa0..1440ae0919ec 100644
--- a/drivers/usb/usbip/vudc_tx.c
+++ b/drivers/usb/usbip/vudc_tx.c
@@ -1,20 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2015 Karol Kosik <karo9@interia.eu>
  * Copyright (C) 2015-2016 Samsung Electronics
  *               Igor Kotrasinski <i.kotrasinsk@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
  */
 
 #include <net/sock.h>
diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/usb/wusbcore/cbaf.c
index aa4e440e9975..222228c5c1e1 100644
--- a/drivers/usb/wusbcore/cbaf.c
+++ b/drivers/usb/wusbcore/cbaf.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless USB - Cable Based Association
  *
@@ -6,21 +7,6 @@
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
  * WUSB devices have to be paired (associated in WUSB lingo) so
  * that they can connect to the system.
  *
diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c
index 062c205f0046..4c00be2d1993 100644
--- a/drivers/usb/wusbcore/crypto.c
+++ b/drivers/usb/wusbcore/crypto.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Ultra Wide Band
  * AES-128 CCM Encryption
@@ -5,21 +6,6 @@
  * Copyright (C) 2007 Intel Corporation
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
  * We don't do any encryption here; we use the Linux Kernel's AES-128
  * crypto modules to construct keys and payload blocks in a way
  * defined by WUSB1.0[6]. Check the erratas, as typos are are patched
diff --git a/drivers/usb/wusbcore/dev-sysfs.c b/drivers/usb/wusbcore/dev-sysfs.c
index 78212f8180ce..85a1acf3a729 100644
--- a/drivers/usb/wusbcore/dev-sysfs.c
+++ b/drivers/usb/wusbcore/dev-sysfs.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * WUSB devices
  * sysfs bindings
@@ -5,21 +6,6 @@
  * Copyright (C) 2007 Intel Corporation
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
  * Get them out of the way...
  */
 
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index bf9551735938..fcb06aef2675 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8])
  * Device Connect handling
@@ -5,21 +6,6 @@
  * Copyright (C) 2006 Intel Corporation
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
  * FIXME: docs
  * FIXME: this file needs to be broken up, it's grown too big
  *
diff --git a/drivers/usb/wusbcore/mmc.c b/drivers/usb/wusbcore/mmc.c
index 3f485df96226..acce0d551eb2 100644
--- a/drivers/usb/wusbcore/mmc.c
+++ b/drivers/usb/wusbcore/mmc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8])
  * MMC (Microscheduled Management Command) handling
@@ -5,21 +6,6 @@
  * Copyright (C) 2005-2006 Intel Corporation
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
  * WUIEs and MMC IEs...well, they are almost the same at the end. MMC
  * IEs are Wireless USB IEs that go into the MMC period...[what is
  * that? look in Design-overview.txt].
diff --git a/drivers/usb/wusbcore/pal.c b/drivers/usb/wusbcore/pal.c
index 090f27371a8f..30f569131471 100644
--- a/drivers/usb/wusbcore/pal.c
+++ b/drivers/usb/wusbcore/pal.c
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless USB Host Controller
  * UWB Protocol Adaptation Layer (PAL) glue.
  *
  * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "wusbhc.h"
 
diff --git a/drivers/usb/wusbcore/reservation.c b/drivers/usb/wusbcore/reservation.c
index 7b1b2e2fb673..6dcfc6825f55 100644
--- a/drivers/usb/wusbcore/reservation.c
+++ b/drivers/usb/wusbcore/reservation.c
@@ -1,19 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * WUSB cluster reservation management
  *
  * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/kernel.h>
 #include <linux/uwb.h>
diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c
index a082fe62b1f0..20c08cd9dcbf 100644
--- a/drivers/usb/wusbcore/rh.c
+++ b/drivers/usb/wusbcore/rh.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless USB Host Controller
  * Root Hub operations
@@ -6,21 +7,6 @@
  * Copyright (C) 2005-2006 Intel Corporation
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
  * We fake a root hub that has fake ports (as many as simultaneous
  * devices the Wireless USB Host Controller can deal with). For each
  * port we keep an state in @wusbhc->port[index] identical to the one
diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c
index 170f2c38de9b..33d2f5d7f33b 100644
--- a/drivers/usb/wusbcore/security.c
+++ b/drivers/usb/wusbcore/security.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless USB Host Controller
  * Security support: encryption enablement, etc
@@ -5,21 +6,6 @@
  * Copyright (C) 2006 Intel Corporation
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
  * FIXME: docs
  */
 #include <linux/types.h>
@@ -28,6 +14,7 @@
 #include <linux/random.h>
 #include <linux/export.h>
 #include "wusbhc.h"
+#include <asm/unaligned.h>
 
 static void wusbhc_gtk_rekey_work(struct work_struct *work);
 
@@ -367,7 +354,6 @@ int wusb_dev_4way_handshake(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev,
 	struct usb_device *usb_dev = wusb_dev->usb_dev;
 	struct device *dev = &usb_dev->dev;
 	u32 tkid;
-	__le32 tkid_le;
 	struct usb_handshake *hs;
 	struct aes_ccm_nonce ccm_n;
 	u8 mic[8];
@@ -385,11 +371,10 @@ int wusb_dev_4way_handshake(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev,
 		goto error_dev_set_encryption;
 
 	tkid = wusbhc_next_tkid(wusbhc, wusb_dev);
-	tkid_le = cpu_to_le32(tkid);
 
 	hs[0].bMessageNumber = 1;
 	hs[0].bStatus = 0;
-	memcpy(hs[0].tTKID, &tkid_le, sizeof(hs[0].tTKID));
+	put_unaligned_le32(tkid, hs[0].tTKID);
 	hs[0].bReserved = 0;
 	memcpy(hs[0].CDID, &wusb_dev->cdid, sizeof(hs[0].CDID));
 	get_random_bytes(&hs[0].nonce, sizeof(hs[0].nonce));
@@ -441,7 +426,7 @@ int wusb_dev_4way_handshake(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev,
 
 	/* Setup the CCM nonce */
 	memset(&ccm_n.sfn, 0, sizeof(ccm_n.sfn)); /* Per WUSB1.0[6.5.2] */
-	memcpy(ccm_n.tkid, &tkid_le, sizeof(ccm_n.tkid));
+	put_unaligned_le32(tkid, ccm_n.tkid);
 	ccm_n.src_addr = wusbhc->uwb_rc->uwb_dev.dev_addr;
 	ccm_n.dest_addr.data[0] = wusb_dev->addr;
 	ccm_n.dest_addr.data[1] = 0;
@@ -472,7 +457,7 @@ int wusb_dev_4way_handshake(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev,
 	/* Send Handshake3 */
 	hs[2].bMessageNumber = 3;
 	hs[2].bStatus = 0;
-	memcpy(hs[2].tTKID, &tkid_le, sizeof(hs[2].tTKID));
+	put_unaligned_le32(tkid, hs[2].tTKID);
 	hs[2].bReserved = 0;
 	memcpy(hs[2].CDID, &wusb_dev->cdid, sizeof(hs[2].CDID));
 	memcpy(hs[2].nonce, hs[0].nonce, sizeof(hs[2].nonce));
diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/usb/wusbcore/wa-hc.c
index d01496fd27fe..6827075fb8a1 100644
--- a/drivers/usb/wusbcore/wa-hc.c
+++ b/drivers/usb/wusbcore/wa-hc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wire Adapter Host Controller Driver
  * Common items to HWA and DWA based HCDs
@@ -5,21 +6,6 @@
  * Copyright (C) 2005-2006 Intel Corporation
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
  * FIXME: docs
  */
 #include <linux/slab.h>
diff --git a/drivers/usb/wusbcore/wa-hc.h b/drivers/usb/wusbcore/wa-hc.h
index edc7267157f3..ec90fff21deb 100644
--- a/drivers/usb/wusbcore/wa-hc.h
+++ b/drivers/usb/wusbcore/wa-hc.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * HWA Host Controller Driver
  * Wire Adapter Control/Data Streaming Iface (WUSB1.0[8])
@@ -5,21 +6,6 @@
  * Copyright (C) 2005-2006 Intel Corporation
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
  * This driver implements a USB Host Controller (struct usb_hcd) for a
  * Wireless USB Host Controller based on the Wireless USB 1.0
  * Host-Wire-Adapter specification (in layman terms, a USB-dongle that
diff --git a/drivers/usb/wusbcore/wa-nep.c b/drivers/usb/wusbcore/wa-nep.c
index e3819fc182b0..9fdcb6b84abf 100644
--- a/drivers/usb/wusbcore/wa-nep.c
+++ b/drivers/usb/wusbcore/wa-nep.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8])
  * Notification EndPoint support
@@ -5,21 +6,6 @@
  * Copyright (C) 2006 Intel Corporation
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
  * This part takes care of getting the notification from the hw
  * only and dispatching through wusbwad into
  * wa_notif_dispatch. Handling is done there.
diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c
index c7ecdbe19a32..d0f1a6698460 100644
--- a/drivers/usb/wusbcore/wa-rpipe.c
+++ b/drivers/usb/wusbcore/wa-rpipe.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * WUSB Wire Adapter
  * rpipe management
@@ -5,21 +6,6 @@
  * Copyright (C) 2005-2006 Intel Corporation
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
  * FIXME: docs
  *
  * RPIPE
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index e70322b1dd02..7fca4e7e556d 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * WUSB Wire Adapter
  * Data transfer and URB enqueing
@@ -5,21 +6,6 @@
  * Copyright (C) 2005-2006 Intel Corporation
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
  * How transfers work: get a buffer, break it up in segments (segment
  * size is a multiple of the maxpacket size). For each segment issue a
  * segment request (struct wa_xfer_*), then send the data buffer if
@@ -2156,6 +2142,7 @@ static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer,
 		 * do not increment RPIPE avail for the WA_SEG_DELAYED case
 		 * since it has not been submitted to the RPIPE.
 		 */
+		/* fall through */
 		case WA_SEG_DELAYED:
 			xfer->segs_done++;
 			current_seg->status = status;
diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c
index 5338e42533c8..e5ba6140c1ba 100644
--- a/drivers/usb/wusbcore/wusbhc.c
+++ b/drivers/usb/wusbcore/wusbhc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless USB Host Controller
  * sysfs glue, wusbcore module support and life cycle management
@@ -6,21 +7,6 @@
  * Copyright (C) 2005-2006 Intel Corporation
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
  * Creation/destruction of wusbhc is split in two parts; that that
  * doesn't require the HCD to be added (wusbhc_{create,destroy}) and
  * the one that requires (phase B, wusbhc_b_{create,destroy}).
diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h
index 8c5bd000739b..7681d796ca5b 100644
--- a/drivers/usb/wusbcore/wusbhc.h
+++ b/drivers/usb/wusbcore/wusbhc.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless USB Host Controller
  * Common infrastructure for WHCI and HWA WUSB-HC drivers
@@ -6,21 +7,6 @@
  * Copyright (C) 2005-2006 Intel Corporation
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
  * This driver implements parts common to all Wireless USB Host
  * Controllers (struct wusbhc, embedding a struct usb_hcd) and is used
  * by:
diff --git a/include/dt-bindings/phy/phy.h b/include/dt-bindings/phy/phy.h
index 6c901930eb3e..d16e8755f6a9 100644
--- a/include/dt-bindings/phy/phy.h
+++ b/include/dt-bindings/phy/phy.h
@@ -15,5 +15,6 @@
 #define PHY_TYPE_PCIE		2
 #define PHY_TYPE_USB2		3
 #define PHY_TYPE_USB3		4
+#define PHY_TYPE_UFS		5
 
 #endif /* _DT_BINDINGS_PHY */
diff --git a/include/linux/extcon-provider.h b/include/linux/extcon-provider.h
new file mode 100644
index 000000000000..2feca5881fa7
--- /dev/null
+++ b/include/linux/extcon-provider.h
@@ -0,0 +1,142 @@
+/*
+ * External Connector (extcon) framework
+ * - linux/include/linux/extcon-provider.h for extcon provider device driver.
+ *
+ * Copyright (C) 2017 Samsung Electronics
+ * Author: Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_EXTCON_PROVIDER_H__
+#define __LINUX_EXTCON_PROVIDER_H__
+
+#include <linux/extcon.h>
+
+struct extcon_dev;
+
+#if IS_ENABLED(CONFIG_EXTCON)
+
+/* Following APIs register/unregister the extcon device. */
+extern int extcon_dev_register(struct extcon_dev *edev);
+extern void extcon_dev_unregister(struct extcon_dev *edev);
+extern int devm_extcon_dev_register(struct device *dev,
+				struct extcon_dev *edev);
+extern void devm_extcon_dev_unregister(struct device *dev,
+				struct extcon_dev *edev);
+
+/* Following APIs allocate/free the memory of the extcon device. */
+extern struct extcon_dev *extcon_dev_allocate(const unsigned int *cable);
+extern void extcon_dev_free(struct extcon_dev *edev);
+extern struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
+				const unsigned int *cable);
+extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev);
+
+/* Synchronize the state and property value for each external connector. */
+extern int extcon_sync(struct extcon_dev *edev, unsigned int id);
+
+/*
+ * Following APIs set the connected state of each external connector.
+ * The 'id' argument indicates the defined external connector.
+ */
+extern int extcon_set_state(struct extcon_dev *edev, unsigned int id,
+				bool state);
+extern int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
+				bool state);
+
+/*
+ * Following APIs set the property of each external connector.
+ * The 'id' argument indicates the defined external connector
+ * and the 'prop' indicates the extcon property.
+ *
+ * And extcon_set_property_capability() set the capability of the property
+ * for each external connector. They are used to set the capability of the
+ * property of each external connector based on the id and property.
+ */
+extern int extcon_set_property(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value prop_val);
+extern int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value prop_val);
+extern int extcon_set_property_capability(struct extcon_dev *edev,
+				unsigned int id, unsigned int prop);
+
+#else /* CONFIG_EXTCON */
+static inline int extcon_dev_register(struct extcon_dev *edev)
+{
+	return 0;
+}
+
+static inline void extcon_dev_unregister(struct extcon_dev *edev) { }
+
+static inline int devm_extcon_dev_register(struct device *dev,
+				struct extcon_dev *edev)
+{
+	return -EINVAL;
+}
+
+static inline void devm_extcon_dev_unregister(struct device *dev,
+				struct extcon_dev *edev) { }
+
+static inline struct extcon_dev *extcon_dev_allocate(const unsigned int *cable)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline void extcon_dev_free(struct extcon_dev *edev) { }
+
+static inline struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
+				const unsigned int *cable)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline void devm_extcon_dev_free(struct extcon_dev *edev) { }
+
+
+static inline int extcon_set_state(struct extcon_dev *edev, unsigned int id,
+				bool state)
+{
+	return 0;
+}
+
+static inline int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
+				bool state)
+{
+	return 0;
+}
+
+static inline int extcon_sync(struct extcon_dev *edev, unsigned int id)
+{
+	return 0;
+}
+
+static inline int extcon_set_property(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value prop_val)
+{
+	return 0;
+}
+
+static inline int extcon_set_property_sync(struct extcon_dev *edev,
+				unsigned int id, unsigned int prop,
+				union extcon_property_value prop_val)
+{
+	return 0;
+}
+
+static inline int extcon_set_property_capability(struct extcon_dev *edev,
+				unsigned int id, unsigned int prop)
+{
+	return 0;
+}
+#endif /* CONFIG_EXTCON */
+#endif /* __LINUX_EXTCON_PROVIDER_H__ */
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index 744d60ca80c3..6d94e82c8ad9 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -1,5 +1,6 @@
 /*
  * External Connector (extcon) framework
+ * - linux/include/linux/extcon.h for extcon consumer device driver.
  *
  * Copyright (C) 2015 Samsung Electronics
  * Author: Chanwoo Choi <cw00.choi@samsung.com>
@@ -170,61 +171,29 @@ union extcon_property_value {
 	int intval;	/* type : integer (intval) */
 };
 
-struct extcon_cable;
 struct extcon_dev;
 
 #if IS_ENABLED(CONFIG_EXTCON)
-
-/* Following APIs register/unregister the extcon device. */
-extern int extcon_dev_register(struct extcon_dev *edev);
-extern void extcon_dev_unregister(struct extcon_dev *edev);
-extern int devm_extcon_dev_register(struct device *dev,
-				struct extcon_dev *edev);
-extern void devm_extcon_dev_unregister(struct device *dev,
-				struct extcon_dev *edev);
-
-/* Following APIs allocate/free the memory of the extcon device. */
-extern struct extcon_dev *extcon_dev_allocate(const unsigned int *cable);
-extern void extcon_dev_free(struct extcon_dev *edev);
-extern struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
-				const unsigned int *cable);
-extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev);
-
-/* Synchronize the state and property value for each external connector. */
-extern int extcon_sync(struct extcon_dev *edev, unsigned int id);
-
 /*
- * Following APIs get/set the connected state of each external connector.
+ * Following APIs get the connected state of each external connector.
  * The 'id' argument indicates the defined external connector.
  */
 extern int extcon_get_state(struct extcon_dev *edev, unsigned int id);
-extern int extcon_set_state(struct extcon_dev *edev, unsigned int id,
-				bool state);
-extern int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
-				bool state);
 
 /*
- * Following APIs get/set the property of each external connector.
+ * Following APIs get the property of each external connector.
  * The 'id' argument indicates the defined external connector
  * and the 'prop' indicates the extcon property.
  *
- * And extcon_get/set_property_capability() set the capability of the property
- * for each external connector. They are used to set the capability of the
+ * And extcon_get_property_capability() get the capability of the property
+ * for each external connector. They are used to get the capability of the
  * property of each external connector based on the id and property.
  */
 extern int extcon_get_property(struct extcon_dev *edev, unsigned int id,
 				unsigned int prop,
 				union extcon_property_value *prop_val);
-extern int extcon_set_property(struct extcon_dev *edev, unsigned int id,
-				unsigned int prop,
-				union extcon_property_value prop_val);
-extern int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id,
-				unsigned int prop,
-				union extcon_property_value prop_val);
 extern int extcon_get_property_capability(struct extcon_dev *edev,
 				unsigned int id, unsigned int prop);
-extern int extcon_set_property_capability(struct extcon_dev *edev,
-				unsigned int id, unsigned int prop);
 
 /*
  * Following APIs register the notifier block in order to detect
@@ -268,79 +237,17 @@ extern struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev,
 extern const char *extcon_get_edev_name(struct extcon_dev *edev);
 
 #else /* CONFIG_EXTCON */
-static inline int extcon_dev_register(struct extcon_dev *edev)
-{
-	return 0;
-}
-
-static inline void extcon_dev_unregister(struct extcon_dev *edev) { }
-
-static inline int devm_extcon_dev_register(struct device *dev,
-				struct extcon_dev *edev)
-{
-	return -EINVAL;
-}
-
-static inline void devm_extcon_dev_unregister(struct device *dev,
-				struct extcon_dev *edev) { }
-
-static inline struct extcon_dev *extcon_dev_allocate(const unsigned int *cable)
-{
-	return ERR_PTR(-ENOSYS);
-}
-
-static inline void extcon_dev_free(struct extcon_dev *edev) { }
-
-static inline struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
-				const unsigned int *cable)
-{
-	return ERR_PTR(-ENOSYS);
-}
-
-static inline void devm_extcon_dev_free(struct extcon_dev *edev) { }
-
-
 static inline int extcon_get_state(struct extcon_dev *edev, unsigned int id)
 {
 	return 0;
 }
 
-static inline int extcon_set_state(struct extcon_dev *edev, unsigned int id,
-				bool state)
-{
-	return 0;
-}
-
-static inline int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
-				bool state)
-{
-	return 0;
-}
-
-static inline int extcon_sync(struct extcon_dev *edev, unsigned int id)
-{
-	return 0;
-}
-
 static inline int extcon_get_property(struct extcon_dev *edev, unsigned int id,
 				unsigned int prop,
 				union extcon_property_value *prop_val)
 {
 	return 0;
 }
-static inline int extcon_set_property(struct extcon_dev *edev, unsigned int id,
-				unsigned int prop,
-				union extcon_property_value prop_val)
-{
-	return 0;
-}
-
-static inline int extcon_set_property_sync(struct extcon_dev *edev,
-				unsigned int id, unsigned int prop,
-				union extcon_property_value prop_val)
-{
-	return 0;
-}
 
 static inline int extcon_get_property_capability(struct extcon_dev *edev,
 				unsigned int id, unsigned int prop)
@@ -348,12 +255,6 @@ static inline int extcon_get_property_capability(struct extcon_dev *edev,
 	return 0;
 }
 
-static inline int extcon_set_property_capability(struct extcon_dev *edev,
-				unsigned int id, unsigned int prop)
-{
-	return 0;
-}
-
 static inline int extcon_register_notifier(struct extcon_dev *edev,
 				unsigned int id, struct notifier_block *nb)
 {
diff --git a/include/linux/mfd/max77843-private.h b/include/linux/mfd/max77843-private.h
index c19303b0ccfd..b8908bf8d315 100644
--- a/include/linux/mfd/max77843-private.h
+++ b/include/linux/mfd/max77843-private.h
@@ -245,10 +245,13 @@ enum max77843_irq_muic {
 #define MAX77843_CHG_OVER_CURRENT_BAT		(0x06 << 4)
 
 /* MAX77843 CHG_CNFG_00 register */
+#define MAX77843_CHG_MODE_MASK			0x0f
 #define MAX77843_CHG_DISABLE			0x00
 #define MAX77843_CHG_ENABLE			0x05
 #define MAX77843_CHG_MASK			0x01
+#define MAX77843_CHG_OTG_MASK			0x02
 #define MAX77843_CHG_BUCK_MASK			0x04
+#define MAX77843_CHG_BOOST_MASK			0x08
 
 /* MAX77843 CHG_CNFG_01 register */
 #define MAX77843_CHG_RESTART_THRESHOLD_100	0x00
@@ -347,6 +350,7 @@ enum max77843_irq_muic {
 /* MAX77843 CONTROL register */
 #define MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT	0
 #define MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT	3
+#define MAX77843_MUIC_CONTROL1_NOBCCOMP_SHIFT	6
 #define MAX77843_MUIC_CONTROL1_IDBEN_SHIFT	7
 #define MAX77843_MUIC_CONTROL2_LOWPWR_SHIFT	0
 #define MAX77843_MUIC_CONTROL2_ADCEN_SHIFT	1
@@ -363,6 +367,7 @@ enum max77843_irq_muic {
 #define MAX77843_MUIC_CONTROL1_COMP1SW_MASK	(0x7 << MAX77843_MUIC_CONTROL1_COMP1SW_SHIFT)
 #define MAX77843_MUIC_CONTROL1_COMP2SW_MASK	(0x7 << MAX77843_MUIC_CONTROL1_COMP2SW_SHIFT)
 #define MAX77843_MUIC_CONTROL1_IDBEN_MASK	BIT(MAX77843_MUIC_CONTROL1_IDBEN_SHIFT)
+#define MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK	BIT(MAX77843_MUIC_CONTROL1_NOBCCOMP_SHIFT)
 #define MAX77843_MUIC_CONTROL2_LOWPWR_MASK	BIT(MAX77843_MUIC_CONTROL2_LOWPWR_SHIFT)
 #define MAX77843_MUIC_CONTROL2_ADCEN_MASK	BIT(MAX77843_MUIC_CONTROL2_ADCEN_SHIFT)
 #define MAX77843_MUIC_CONTROL2_CPEN_MASK	BIT(MAX77843_MUIC_CONTROL2_CPEN_SHIFT)
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index 6dec43826303..3c8568aa82a5 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -20,7 +20,7 @@
 #include <linux/leds.h>
 #include <linux/regmap.h>
 #include <linux/regulator/driver.h>
-#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
 #include <linux/of_gpio.h>
 #include <linux/usb/phy_companion.h>
 
diff --git a/include/linux/phy/phy-qcom-ufs.h b/include/linux/phy/phy-qcom-ufs.h
index 35c070ea6ea3..0a2c18a9771d 100644
--- a/include/linux/phy/phy-qcom-ufs.h
+++ b/include/linux/phy/phy-qcom-ufs.h
@@ -31,10 +31,7 @@ void ufs_qcom_phy_enable_dev_ref_clk(struct phy *phy);
  */
 void ufs_qcom_phy_disable_dev_ref_clk(struct phy *phy);
 
-int ufs_qcom_phy_start_serdes(struct phy *phy);
 int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes);
-int ufs_qcom_phy_calibrate_phy(struct phy *phy, bool is_rate_B);
-int ufs_qcom_phy_is_pcs_ready(struct phy *phy);
 void ufs_qcom_phy_save_controller_version(struct phy *phy,
 			u8 major, u16 minor, u16 step);
 
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index e694d4008c4a..4f8423a948d5 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -29,6 +29,8 @@ enum phy_mode {
 	PHY_MODE_USB_OTG,
 	PHY_MODE_SGMII,
 	PHY_MODE_10GKR,
+	PHY_MODE_UFS_HS_A,
+	PHY_MODE_UFS_HS_B,
 };
 
 /**
@@ -39,6 +41,7 @@ enum phy_mode {
  * @power_off: powering off the phy
  * @set_mode: set the mode of the phy
  * @reset: resetting the phy
+ * @calibrate: calibrate the phy
  * @owner: the module owner containing the ops
  */
 struct phy_ops {
@@ -48,6 +51,7 @@ struct phy_ops {
 	int	(*power_off)(struct phy *phy);
 	int	(*set_mode)(struct phy *phy, enum phy_mode mode);
 	int	(*reset)(struct phy *phy);
+	int	(*calibrate)(struct phy *phy);
 	struct module *owner;
 };
 
@@ -141,6 +145,7 @@ int phy_power_on(struct phy *phy);
 int phy_power_off(struct phy *phy);
 int phy_set_mode(struct phy *phy, enum phy_mode mode);
 int phy_reset(struct phy *phy);
+int phy_calibrate(struct phy *phy);
 static inline int phy_get_bus_width(struct phy *phy)
 {
 	return phy->attrs.bus_width;
@@ -262,6 +267,13 @@ static inline int phy_reset(struct phy *phy)
 	return -ENOSYS;
 }
 
+static inline int phy_calibrate(struct phy *phy)
+{
+	if (!phy)
+		return 0;
+	return -ENOSYS;
+}
+
 static inline int phy_get_bus_width(struct phy *phy)
 {
 	return -ENOSYS;
@@ -291,7 +303,7 @@ static inline struct phy *devm_phy_get(struct device *dev, const char *string)
 static inline struct phy *devm_phy_optional_get(struct device *dev,
 						const char *string)
 {
-	return ERR_PTR(-ENOSYS);
+	return NULL;
 }
 
 static inline struct phy *devm_of_phy_get(struct device *dev,
diff --git a/include/linux/soc/brcmstb/brcmstb.h b/include/linux/soc/brcmstb/brcmstb.h
index 003f3dd5b192..12e548938bbb 100644
--- a/include/linux/soc/brcmstb/brcmstb.h
+++ b/include/linux/soc/brcmstb/brcmstb.h
@@ -2,10 +2,27 @@
 #ifndef __BRCMSTB_SOC_H
 #define __BRCMSTB_SOC_H
 
+static inline u32 BRCM_ID(u32 reg)
+{
+	return reg >> 28 ? reg >> 16 : reg >> 8;
+}
+
+static inline u32 BRCM_REV(u32 reg)
+{
+	return reg & 0xff;
+}
+
 /*
  * Bus Interface Unit control register setup, must happen early during boot,
  * before SMP is brought up, called by machine entry point.
  */
 void brcmstb_biuctrl_init(void);
 
+/*
+ * Helper functions for getting family or product id from the
+ * SoC driver.
+ */
+u32 brcmstb_get_family_id(void);
+u32 brcmstb_get_product_id(void);
+
 #endif /* __BRCMSTB_SOC_H */
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 9c63792a8134..f019b0397599 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1767,7 +1767,21 @@ extern int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
 extern int usb_get_descriptor(struct usb_device *dev, unsigned char desctype,
 	unsigned char descindex, void *buf, int size);
 extern int usb_get_status(struct usb_device *dev,
-	int type, int target, void *data);
+	int recip, int type, int target, void *data);
+
+static inline int usb_get_std_status(struct usb_device *dev,
+	int recip, int target, void *data)
+{
+	return usb_get_status(dev, recip, USB_STATUS_TYPE_STANDARD, target,
+		data);
+}
+
+static inline int usb_get_ptm_status(struct usb_device *dev, void *data)
+{
+	return usb_get_status(dev, USB_RECIP_DEVICE, USB_STATUS_TYPE_PTM,
+		0, data);
+}
+
 extern int usb_string(struct usb_device *dev, int index,
 	char *buf, size_t size);
 
diff --git a/include/linux/usb/association.h b/include/linux/usb/association.h
index 0a4a18b3c1bb..d7f3cb9b9db5 100644
--- a/include/linux/usb/association.h
+++ b/include/linux/usb/association.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless USB - Cable Based Association
  *
diff --git a/include/linux/usb/audio-v2.h b/include/linux/usb/audio-v2.h
index fd73bc0e9027..3119d0ace7aa 100644
--- a/include/linux/usb/audio-v2.h
+++ b/include/linux/usb/audio-v2.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2010 Daniel Mack <daniel@caiaq.de>
  *
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index 3d84619110a4..170acd500ea1 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * <linux/usb/audio.h> -- USB Audio definitions.
  *
diff --git a/include/linux/usb/c67x00.h b/include/linux/usb/c67x00.h
index 83c6b45470ca..2fc39e3b7281 100644
--- a/include/linux/usb/c67x00.h
+++ b/include/linux/usb/c67x00.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * usb_c67x00.h: platform definitions for the Cypress C67X00 USB chip
  *
diff --git a/include/linux/usb/cdc-wdm.h b/include/linux/usb/cdc-wdm.h
index 0b3f4295c025..9b895f93d8de 100644
--- a/include/linux/usb/cdc-wdm.h
+++ b/include/linux/usb/cdc-wdm.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB CDC Device Management subdriver
  *
diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h
index b5706f94ee9e..35d784cf32a4 100644
--- a/include/linux/usb/cdc.h
+++ b/include/linux/usb/cdc.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB CDC common helpers
  *
diff --git a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h
index 1a59699cf82a..1646c06989df 100644
--- a/include/linux/usb/cdc_ncm.h
+++ b/include/linux/usb/cdc_ncm.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 /*
  * Copyright (C) ST-Ericsson 2010-2012
  * Contact: Alexey Orishko <alexey.orishko@stericsson.com>
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index f665d2ceac20..cef0e44601f8 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * composite.h -- framework for usb gadgets which are composite devices
  *
diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
index e479033bd782..a15ce99dfc2d 100644
--- a/include/linux/usb/ehci_def.h
+++ b/include/linux/usb/ehci_def.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (c) 2001-2002 by David Brownell
  *
diff --git a/include/linux/usb/ehci_pdriver.h b/include/linux/usb/ehci_pdriver.h
index db0431b39a63..dd742afdc03f 100644
--- a/include/linux/usb/ehci_pdriver.h
+++ b/include/linux/usb/ehci_pdriver.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
  *
diff --git a/include/linux/usb/g_hid.h b/include/linux/usb/g_hid.h
index 50f5745df28c..7581e488c237 100644
--- a/include/linux/usb/g_hid.h
+++ b/include/linux/usb/g_hid.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * g_hid.h -- Header file for USB HID gadget driver
  *
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 21468a722c4a..0142f3af0da6 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * <linux/usb/gadget.h>
  *
@@ -188,6 +189,8 @@ struct usb_ep_caps {
  * @ops: Function pointers used to access hardware-specific operations.
  * @ep_list:the gadget's ep_list holds all of its endpoints
  * @caps:The structure describing types and directions supported by endoint.
+ * @enabled: The current endpoint enabled/disabled state.
+ * @claimed: True if this endpoint is claimed by a function.
  * @maxpacket:The maximum packet size used on this endpoint.  The initial
  *	value can sometimes be reduced (hardware allowing), according to
  *	the endpoint descriptor used to configure the endpoint.
@@ -349,6 +352,9 @@ struct usb_gadget_ops {
  *	or B-Peripheral wants to take host role.
  * @quirk_ep_out_aligned_size: epout requires buffer size to be aligned to
  *	MaxPacketSize.
+ * @quirk_altset_not_supp: UDC controller doesn't support alt settings.
+ * @quirk_stall_not_supp: UDC controller doesn't support stalling.
+ * @quirk_zlp_not_supp: UDC controller doesn't support ZLP.
  * @quirk_avoids_skb_reserve: udc/platform wants to avoid skb_reserve() in
  *	u_ether.c to improve performance.
  * @is_selfpowered: if the gadget is self-powered.
diff --git a/include/linux/usb/gpio_vbus.h b/include/linux/usb/gpio_vbus.h
index 837bba604a0b..804fb06cf6d6 100644
--- a/include/linux/usb/gpio_vbus.h
+++ b/include/linux/usb/gpio_vbus.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * A simple GPIO VBUS sensing driver for B peripheral only devices
  * with internal transceivers.
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index a1f03ebfde47..176900528822 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (c) 2001-2002 by David Brownell
  *
diff --git a/include/linux/usb/input.h b/include/linux/usb/input.h
index 0e010b220e85..974befa72ac0 100644
--- a/include/linux/usb/input.h
+++ b/include/linux/usb/input.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2005 Dmitry Torokhov
  *
diff --git a/include/linux/usb/isp1301.h b/include/linux/usb/isp1301.h
index d3a851c28b6a..dedb3b2473e8 100644
--- a/include/linux/usb/isp1301.h
+++ b/include/linux/usb/isp1301.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * NXP ISP1301 USB transceiver driver
  *
diff --git a/include/linux/usb/m66592.h b/include/linux/usb/m66592.h
index a4ba31ab2fed..2dfe68183495 100644
--- a/include/linux/usb/m66592.h
+++ b/include/linux/usb/m66592.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * M66592 driver platform data
  *
diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h
deleted file mode 100644
index 974c3796a23f..000000000000
--- a/include/linux/usb/msm_hsusb_hw.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__
-#define __LINUX_USB_GADGET_MSM72K_UDC_H__
-
-/* USB phy selector - in TCSR address range */
-#define USB2_PHY_SEL         0xfd4ab000
-
-#define USB_AHBBURST         (MSM_USB_BASE + 0x0090)
-#define USB_AHBMODE          (MSM_USB_BASE + 0x0098)
-#define USB_GENCONFIG_2      (MSM_USB_BASE + 0x00a0)
-#define ULPI_TX_PKT_EN_CLR_FIX	BIT(19)
-
-#define USB_CAPLENGTH        (MSM_USB_BASE + 0x0100) /* 8 bit */
-
-#define USB_USBCMD           (MSM_USB_BASE + 0x0140)
-#define USB_PORTSC           (MSM_USB_BASE + 0x0184)
-#define USB_OTGSC            (MSM_USB_BASE + 0x01A4)
-#define USB_USBMODE          (MSM_USB_BASE + 0x01A8)
-#define USB_PHY_CTRL         (MSM_USB_BASE + 0x0240)
-#define USB_PHY_CTRL2        (MSM_USB_BASE + 0x0278)
-
-#define GENCONFIG_2_SESS_VLD_CTRL_EN	BIT(7)
-#define USBCMD_SESS_VLD_CTRL		BIT(25)
-
-#define USBCMD_RESET   2
-#define USB_USBINTR          (MSM_USB_BASE + 0x0148)
-
-#define PORTSC_PHCD            (1 << 23) /* phy suspend mode */
-#define PORTSC_PTS_MASK        (3 << 30)
-#define PORTSC_PTS_ULPI        (2 << 30)
-#define PORTSC_PTS_SERIAL      (3 << 30)
-
-#define USB_ULPI_VIEWPORT    (MSM_USB_BASE + 0x0170)
-#define ULPI_RUN              (1 << 30)
-#define ULPI_WRITE            (1 << 29)
-#define ULPI_READ             (0 << 29)
-#define ULPI_ADDR(n)          (((n) & 255) << 16)
-#define ULPI_DATA(n)          ((n) & 255)
-#define ULPI_DATA_READ(n)     (((n) >> 8) & 255)
-
-/* synopsys 28nm phy registers */
-#define ULPI_PWR_CLK_MNG_REG	0x88
-#define OTG_COMP_DISABLE	BIT(0)
-
-#define ULPI_MISC_A			0x96
-#define ULPI_MISC_A_VBUSVLDEXTSEL	BIT(1)
-#define ULPI_MISC_A_VBUSVLDEXT		BIT(0)
-
-#define ASYNC_INTR_CTRL         (1 << 29) /* Enable async interrupt */
-#define ULPI_STP_CTRL           (1 << 30) /* Block communication with PHY */
-#define PHY_RETEN               (1 << 1) /* PHY retention enable/disable */
-#define PHY_POR_ASSERT		(1 << 0) /* USB2 28nm PHY POR ASSERT */
-
-/* OTG definitions */
-#define OTGSC_INTSTS_MASK	(0x7f << 16)
-#define OTGSC_ID		(1 << 8)
-#define OTGSC_BSV		(1 << 11)
-#define OTGSC_IDIS		(1 << 16)
-#define OTGSC_BSVIS		(1 << 19)
-#define OTGSC_IDIE		(1 << 24)
-#define OTGSC_BSVIE		(1 << 27)
-
-#endif /* __LINUX_USB_GADGET_MSM72K_UDC_H__ */
diff --git a/include/linux/usb/musb-ux500.h b/include/linux/usb/musb-ux500.h
index 1e2c7130f6e1..c4b7ad9850ca 100644
--- a/include/linux/usb/musb-ux500.h
+++ b/include/linux/usb/musb-ux500.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2013 ST-Ericsson AB
  *
diff --git a/include/linux/usb/net2280.h b/include/linux/usb/net2280.h
index 725120224472..08b85caecfaf 100644
--- a/include/linux/usb/net2280.h
+++ b/include/linux/usb/net2280.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * NetChip 2280 high/full speed USB device controller.
  * Unlike many such controllers, this one talks PCI.
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
index 4031f47629ec..6cbe7a5c2b57 100644
--- a/include/linux/usb/of.h
+++ b/include/linux/usb/of.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * OF helpers for usb devices.
  *
diff --git a/include/linux/usb/ohci_pdriver.h b/include/linux/usb/ohci_pdriver.h
index 012f2b7eb2b6..7eb16cf587ee 100644
--- a/include/linux/usb/ohci_pdriver.h
+++ b/include/linux/usb/ohci_pdriver.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
  *
diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h
index a0a8f878503c..e78eb577d0fa 100644
--- a/include/linux/usb/otg-fsm.h
+++ b/include/linux/usb/otg-fsm.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /* Copyright (C) 2007,2008 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
diff --git a/include/linux/usb/phy_companion.h b/include/linux/usb/phy_companion.h
index edd2ec23d282..407f530061cd 100644
--- a/include/linux/usb/phy_companion.h
+++ b/include/linux/usb/phy_companion.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * phy-companion.h -- phy companion to indicate the comparator part of PHY
  *
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index 7cd553a3ce05..f1fcec2fd5f8 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -57,4 +57,10 @@
  */
 #define USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL	BIT(11)
 
+/*
+ * Device needs to be disconnected before suspend to prevent spurious
+ * wakeup.
+ */
+#define USB_QUIRK_DISCONNECT_SUSPEND		BIT(12)
+
 #endif /* __LINUX_USB_QUIRKS_H */
diff --git a/include/linux/usb/r8a66597.h b/include/linux/usb/r8a66597.h
index 55805f9dcf21..c0753d026bbf 100644
--- a/include/linux/usb/r8a66597.h
+++ b/include/linux/usb/r8a66597.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * R8A66597 driver platform data
  *
diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
index 00a47d058d83..67102f3d59d4 100644
--- a/include/linux/usb/renesas_usbhs.h
+++ b/include/linux/usb/renesas_usbhs.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-1.0+
 /*
  * Renesas USB
  *
@@ -183,8 +184,9 @@ struct renesas_usbhs_driver_param {
 #define USBHS_USB_DMAC_XFER_SIZE	32	/* hardcode the xfer size */
 };
 
-#define USBHS_TYPE_RCAR_GEN2	1
-#define USBHS_TYPE_RCAR_GEN3	2
+#define USBHS_TYPE_RCAR_GEN2		1
+#define USBHS_TYPE_RCAR_GEN3		2
+#define USBHS_TYPE_RCAR_GEN3_WITH_PLL	3
 
 /*
  * option:
diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h
index d44ef85db177..809bccd08455 100644
--- a/include/linux/usb/rndis_host.h
+++ b/include/linux/usb/rndis_host.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Host Side support for RNDIS Networking Links
  * Copyright (C) 2005 by David Brownell
diff --git a/include/linux/usb/samsung_usb_phy.h b/include/linux/usb/samsung_usb_phy.h
index 916782699f1c..dc0071741695 100644
--- a/include/linux/usb/samsung_usb_phy.h
+++ b/include/linux/usb/samsung_usb_phy.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2012 Samsung Electronics Co.Ltd
  *		http://www.samsung.com/
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index e2f0ab07eea5..106551a5616e 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB Serial Converter stuff
  *
diff --git a/include/linux/usb/storage.h b/include/linux/usb/storage.h
index 305ee8db7faf..e0240f864548 100644
--- a/include/linux/usb/storage.h
+++ b/include/linux/usb/storage.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #ifndef __LINUX_USB_STORAGE_H
 #define __LINUX_USB_STORAGE_H
 
diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h
index 1de16c324ec8..d641ea1660b7 100644
--- a/include/linux/usb/tegra_usb_phy.h
+++ b/include/linux/usb/tegra_usb_phy.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2010 Google, Inc.
  *
diff --git a/include/linux/usb/tilegx.h b/include/linux/usb/tilegx.h
index 2d65e3435680..817908573fe8 100644
--- a/include/linux/usb/tilegx.h
+++ b/include/linux/usb/tilegx.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright 2012 Tilera Corporation. All Rights Reserved.
  *
diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h
index 5f07407a367a..c515765adab7 100644
--- a/include/linux/usb/ulpi.h
+++ b/include/linux/usb/ulpi.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * ulpi.h -- ULPI defines and function prorotypes
  *
diff --git a/include/linux/usb/usb338x.h b/include/linux/usb/usb338x.h
index 11525d8d89a7..7189e3387bf9 100644
--- a/include/linux/usb/usb338x.h
+++ b/include/linux/usb/usb338x.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * USB 338x super/high/full speed USB device controller.
  * Unlike many such controllers, this one talks PCI.
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 97116379db5f..a69877734c4e 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * USB Networking Link Interface
  *
diff --git a/include/linux/usb/wusb-wa.h b/include/linux/usb/wusb-wa.h
index c1257130769b..64a840b5106e 100644
--- a/include/linux/usb/wusb-wa.h
+++ b/include/linux/usb/wusb-wa.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless USB Wire Adapter constants and structures.
  *
diff --git a/include/linux/usb/wusb.h b/include/linux/usb/wusb.h
index eeb28329fa3c..9e4a3213f2c2 100644
--- a/include/linux/usb/wusb.h
+++ b/include/linux/usb/wusb.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Wireless USB Standard Definitions
  * Event Size Tables
diff --git a/include/linux/usb/xhci-dbgp.h b/include/linux/usb/xhci-dbgp.h
index 80c1cca1f529..0a37f1283bf0 100644
--- a/include/linux/usb/xhci-dbgp.h
+++ b/include/linux/usb/xhci-dbgp.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Standalone xHCI debug capability driver
  *
diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h
index 04a26285416c..79aab0065ec8 100644
--- a/include/linux/usbdevice_fs.h
+++ b/include/linux/usbdevice_fs.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*****************************************************************************/
 
 /*
diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h
index cec06625f407..41a0a81b01e6 100644
--- a/include/uapi/linux/usb/ch9.h
+++ b/include/uapi/linux/usb/ch9.h
@@ -144,6 +144,10 @@
 #define	TEST_PACKET	4
 #define	TEST_FORCE_EN	5
 
+/* Status Type */
+#define USB_STATUS_TYPE_STANDARD	0
+#define USB_STATUS_TYPE_PTM		1
+
 /*
  * New Feature Selectors as added by USB 3.0
  * See USB 3.0 spec Table 9-7
diff --git a/tools/usb/usbip/Makefile.am b/tools/usb/usbip/Makefile.am
index da3a430849a8..5961e9c18812 100644
--- a/tools/usb/usbip/Makefile.am
+++ b/tools/usb/usbip/Makefile.am
@@ -2,6 +2,7 @@
 SUBDIRS := libsrc src
 includedir = @includedir@/usbip
 include_HEADERS := $(addprefix libsrc/, \
-		     usbip_common.h vhci_driver.h usbip_host_driver.h)
+		     usbip_common.h vhci_driver.h usbip_host_driver.h \
+		     list.h sysfs_utils.h usbip_host_common.h)
 
 dist_man_MANS := $(addprefix doc/, usbip.8 usbipd.8)