summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2017-11-07 18:21:18 +0300
committerArnd Bergmann <arnd@arndb.de>2017-11-07 18:21:18 +0300
commit87f89ace81d0978a1049a92c6a9921de5aa0a9e3 (patch)
tree231cbb600fb13960d3a76257a961bc9c0c303d2f
parentea7cdc066e479cb7d8a3551d206c7aa9c7f8b33a (diff)
parentbe84dfa70dde6bb072c9cc9bba0a741841f0baa2 (diff)
downloadlinux-87f89ace81d0978a1049a92c6a9921de5aa0a9e3.tar.xz
Merge tag 'v4.15-rockchip-dts32-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Pull "Rockchip dts32 updates for 4.15 part2" from Heiko Stübner: CEC support for the two rk3288-firefly variants and general hdmi support for the firefly-reload. A lot of additions and corrections for the rk3288-vyasa and thermal support for the rv1108. * tag 'v4.15-rockchip-dts32-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: enable the hdmi output on the rk3288-firefly-reload ARM: dts: rockchip: define the two possible rk3288 CEC pins ARM: dts: rockchip: add the cec clk for dw-hdmi on rk3288 ARM: dts: rockchip: Add io domains for rk3288-vyasa ARM: dts: rockchip: Add usb otg for rk3288-vyasa ARM: dts: rockchip: Add usb host for rk3288-vyasa ARM: dts: rockchip: Add gmac support for rk3288-vyasa board ARM: dts: rockchip: Add regulators for rk3288-vyasa ARM: dts: rockchip: Use vmmc-supply from PMIC on rk3288-vyasa ARM: dts: rockchip: Remove vdd_log from rk808, DCDC_REG1 on rk3288-vyasa ARM: dts: rockchip: enable tsadc module on RV1108 evaluation board ARM: dts: rockchip: add thermal nodes for RV1108 SoC ARM: dts: rockchip: add tsadc node for RV1108 SoC ARM: dts: rockchip: add RGA device node for RK3288
-rw-r--r--arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi2
-rw-r--r--arch/arm/boot/dts/rk3288-firefly-reload.dts11
-rw-r--r--arch/arm/boot/dts/rk3288-vyasa.dts179
-rw-r--r--arch/arm/boot/dts/rk3288.dtsi23
-rw-r--r--arch/arm/boot/dts/rv1108-evb.dts4
-rw-r--r--arch/arm/boot/dts/rv1108.dtsi67
6 files changed, 270 insertions, 16 deletions
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
index 5f05815f47e0..5f1e336dbaac 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
@@ -184,6 +184,7 @@
regulator-name = "vdd10_lcd";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
+ regulator-always-on;
};
vcca_18: REG7 {
@@ -223,6 +224,7 @@
regulator-name = "vcc18_lcd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
};
};
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
index 7da0947ababb..eab176e3dfc3 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -226,6 +226,13 @@
};
};
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec_c0>;
+ status = "okay";
+};
+
&i2c0 {
hym8563: hym8563@51 {
compatible = "haoyu,hym8563";
@@ -255,6 +262,10 @@
};
};
+&i2c5 {
+ status = "okay";
+};
+
&i2s {
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index 3546eb8629c7..9842a006e823 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -56,25 +56,98 @@
device_type = "memory";
};
- vcc_sd: sdmmc-regulator {
+ dc12_vbat: dc12-vbat {
compatible = "regulator-fixed";
- gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_pwr>;
- regulator-name = "vcc_sd";
+ regulator-name = "dc12_vbat";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vboot_3v3: vboot-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vboot_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- startup-delay-us = <100000>;
- vin-supply = <&vcc_io>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&dc12_vbat>;
};
vcc_sys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&dc12_vbat>;
+ };
+
+ vboot_5v: vboot-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vboot_sv";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&dc12_vbat>;
+ };
+
+ v3g_3v3: v3g-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "v3g_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&dc12_vbat>;
+ };
+
+ vsus_5v: vsus-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vsus_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
+ vin-supply = <&vcc_io>;
+ };
+
+ vusb1_5v: vusb1-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vusb1_5v";
+ enable-active-high;
+ gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; /* OTG_VBUS_DRV */
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_vbus_drv>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vsus_5v>;
+ };
+
+ vusb2_5v: vusb2-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vusb2_5v";
+ enable-active-high;
+ gpio = <&gpio8 RK_PB1 GPIO_ACTIVE_HIGH>; /* USB2_PWR_EN */
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_pwr_en>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vsus_5v>;
+ };
+
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
};
};
@@ -82,6 +155,22 @@
cpu0-supply = <&vdd_cpu>;
};
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ clock_in_out = "input";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "okay";
+};
+
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
@@ -121,8 +210,8 @@
vcc12-supply = <&vcc_io>;
regulators {
- vdd_cpu: vdd_log: DCDC_REG1 {
- regulator-name = "vdd_log";
+ vdd_cpu: DCDC_REG1 {
+ regulator-name = "vdd_arm";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
@@ -260,8 +349,8 @@
};
};
- vcc33_sd: SWITCH_REG1 {
- regulator-name = "vcc33_sd";
+ vcc_sd: SWITCH_REG1 {
+ regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
@@ -289,6 +378,21 @@
status = "okay";
};
+&io_domains {
+ status = "okay";
+
+ audio-supply = <&vcc_18>;
+ bb-supply = <&vcc_io>;
+ dvp-supply = <&vcc_io>;
+ flash0-suuply = <&vcc_18>;
+ flash1-supply = <&vcc_lan>;
+ gpio30-supply = <&vcc_io>;
+ gpio1830 = <&vcc_io>;
+ lcdc-supply = <&vcc_io>;
+ sdcard-supply = <&vccio_sd>;
+ wifi-supply = <&vcc_18>;
+};
+
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
@@ -312,6 +416,24 @@
status = "okay";
};
+&usbphy {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&phy_pwr_en>;
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
+
&vopb {
status = "okay";
};
@@ -333,15 +455,44 @@
};
&pinctrl {
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ gmac {
+ phy_int: phy-int {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ phy_pmeb: phy-pmeb {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ phy_rst: phy-rst {
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+
pmic {
pmic_int: pmic-int {
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
- sdmmc {
- sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ usb_host {
+ phy_pwr_en: phy-pwr-en {
+ rockchip,pins = <RK_GPIO2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+
+ usb2_pwr_en: usb2-pwr-en {
+ rockchip,pins = <8 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb_otg {
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <RK_GPIO0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+
};
};
};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index cd7b081a1c6a..cd24894ee5c6 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -972,6 +972,17 @@
status = "disabled";
};
+ rga: rga@ff920000 {
+ compatible = "rockchip,rk3288-rga";
+ reg = <0x0 0xff920000 0x0 0x180>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>;
+ clock-names = "aclk", "hclk", "sclk";
+ power-domains = <&power RK3288_PD_VIO>;
+ resets = <&cru SRST_RGA_CORE>, <&cru SRST_RGA_AXI>, <&cru SRST_RGA_AHB>;
+ reset-names = "core", "axi", "ahb";
+ };
+
vopb: vop@ff930000 {
compatible = "rockchip,rk3288-vop";
reg = <0x0 0xff930000 0x0 0x19c>;
@@ -1167,8 +1178,8 @@
reg-io-width = <4>;
rockchip,grf = <&grf>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
- clock-names = "iahb", "isfr";
+ clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
+ clock-names = "iahb", "isfr", "cec";
power-domains = <&power RK3288_PD_VIO>;
status = "disabled";
@@ -1470,6 +1481,14 @@
};
hdmi {
+ hdmi_cec_c0: hdmi-cec-c0 {
+ rockchip,pins = <7 RK_PC0 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ hdmi_cec_c7: hdmi-cec-c7 {
+ rockchip,pins = <7 RK_PC7 RK_FUNC_4 &pcfg_pull_none>;
+ };
+
hdmi_ddc: hdmi-ddc {
rockchip,pins = <7 19 RK_FUNC_2 &pcfg_pull_none>,
<7 20 RK_FUNC_2 &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
index 86a57f823616..70f0106d1252 100644
--- a/arch/arm/boot/dts/rv1108-evb.dts
+++ b/arch/arm/boot/dts/rv1108-evb.dts
@@ -222,6 +222,10 @@
status = "okay";
};
+&tsadc {
+ status = "okay";
+};
+
&u2phy {
status = "okay";
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index e7cd1315db1b..76ea24636feb 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -43,6 +43,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/rv1108-cru.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
@@ -70,6 +71,8 @@
compatible = "arm,cortex-a7";
reg = <0xf00>;
clocks = <&cru ARMCLK>;
+ #cooling-cells = <2>; /* min followed by max */
+ dynamic-power-coefficient = <75>;
operating-points-v2 = <&cpu_opp_table>;
};
};
@@ -329,6 +332,60 @@
status = "disabled";
};
+ thermal-zones {
+ soc_thermal: soc-thermal {
+ polling-delay-passive = <20>;
+ polling-delay = <1000>;
+ sustainable-power = <50>;
+ thermal-sensors = <&tsadc 0>;
+
+ trips {
+ threshold: trip-point0 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ target: trip-point1 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ soc_crit: soc-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&target>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <4096>;
+ };
+ };
+ };
+ };
+
+ tsadc: tsadc@10370000 {
+ compatible = "rockchip,rv1108-tsadc";
+ reg = <0x10370000 0x100>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&cru SCLK_TSADC>;
+ assigned-clock-rates = <750000>;
+ clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ pinctrl-names = "init", "default", "sleep";
+ pinctrl-0 = <&otp_gpio>;
+ pinctrl-1 = <&otp_out>;
+ pinctrl-2 = <&otp_gpio>;
+ resets = <&cru SRST_TSADC>;
+ reset-names = "tsadc-apb";
+ rockchip,hw-tshut-temp = <120000>;
+ #thermal-sensor-cells = <1>;
+ status = "disabled";
+ };
+
adc: adc@1038c000 {
compatible = "rockchip,rv1108-saradc", "rockchip,rk3399-saradc";
reg = <0x1038c000 0x100>;
@@ -740,6 +797,16 @@
};
};
+ tsadc {
+ otp_out: otp-out {
+ rockchip,pins = <0 RK_PB7 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ otp_gpio: otp-gpio {
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>,