| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
To quote the author:
"Scmi" command will be re-introduced per Michal's request.
The functionality is the same as I put it in my patch set of adding
SCMI base protocol support, but made some tweak to make UT, "ut dm
scmi_cmd," more flexible and tolerable when enabling/disabling a specific
SCMI protocol for test purpose.
Each commit may have some change history inherited from the preceding
patch series.
Test
====
The patch series was tested on the following platforms:
* sandbox
|
|
In this test, "scmi" command is tested against different sub-commands.
Please note that scmi command is for debug purpose and is not intended
in production system.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>
|
|
This is a precautionary change to make scmi tests workable whether or not
a specific protocol be enabled. If a given protocol is not configured,
we skip the test by returning -EAGAIN.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
To quote the author:
This series fixes an issue where the FAT type (FAT12, FAT16) is not
correctly detected, e.g. when the BPB field BS_FilSysType contains the
valid value "FAT ".
This issue occures, for example, if a partition is formatted by
swupdate using its diskformat handler. swupdate uses the FAT library
from http://elm-chan.org/fsw/ff/ internally.
See https://groups.google.com/g/swupdate/c/7Yc3NupjXx8 for a
discussion in the swupdate mailing list.
Please refer to the commit messages for more details.
1. Added bootsector checks
Most tests from https://www.win.tue.nl/~aeb/linux/fs/fat/fat-2.html
are added in the commit 'fs: fat: add bootsector validity check'.
Only the tests VIII, IX and X are not implemented.
I also checked the Linux kernel code (v6.6) and did not find any
checks on 'vistart->fs_type'. This is the reason why is skipped them
here.
See section '2. Size comparisons' for the impact on the binary size.
2. Size comparisons
I executed bloat-o-meter from the Linux kernel for an arm64
target (config xilinx_zynqmp_mini_emmc0_defconfig):
Comparison of the binary spl/u-boot-spl between master (rev
e17d174773e9ba9447596708e702b7382e47a6cf) and this patch
series (including the added validity checks of the boot sector):
add/remove: 0/0 grow/shrink: 1/1 up/down: 100/-12 (88)
Function old new delta
read_bootsectandvi 308 408 +100
fat_itr_root 444 432 -12
Total: Before=67977, After=68065, chg +0.13%
When compare the size of the binary spl/u-boot-spl between master this
series without the the validity checks of the boot sector:
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-24 (-24)
Function old new delta
read_bootsectandvi 308 296 -12
fat_itr_root 444 432 -12
Total: Before=67977, After=67953, chg -0.04%
So the size of the spl on this arm64 target increases by 88 bytes for
this series. When i remove the validity check the size decreases by 24 bytes.
|
|
Ensure that a large FAT12 filesystem and a small FAT16 filesystem are
detected correctly.
Signed-off-by: Christian Taedcke <christian.taedcke@weidmueller.com>
|
|
Without this commit it is only possible to create filesystem images
with a size granularity of 1MB.
This commit adds the option to create file systems with different
sizes, e.g 8.5MB.
Signed-off-by: Christian Taedcke <christian.taedcke@weidmueller.com>
|
|
The tests fs_ext, fs_mkdir and fs_unlink support fat12 without
modifications.
The fs_basic test uses a partition that is too large for fat12, so it
is omitted here.
Signed-off-by: Christian Taedcke <christian.taedcke@weidmueller.com>
|
|
This enables to implement tests for fat12 filesystem.
Signed-off-by: Christian Taedcke <christian.taedcke@weidmueller.com>
|
|
FAT32_SIGN is removed in the following commits.
Signed-off-by: Christian Taedcke <christian.taedcke@weidmueller.com>
|
|
Prepare v2024.01-rc3
|
|
Changes for complying to EFI spec §3.5.1.1
'Removable Media Boot Behavior'.
Boot variables can be automatically generated during a removable
media is probed. At the same time, unused boot variables will be
detected and removed.
Please note that currently the function 'efi_disk_remove' has no
ability to distinguish below two scenarios
a) Unplugging of a removable media under U-Boot
b) U-Boot exiting and booting an OS
Thus currently the boot variables management is not added into
'efi_disk_remove' to avoid boot options being added/erased
repeatedly under scenario b) during power cycles
See TODO comments under function 'efi_disk_remove' for more details
The original efi_secboot tests expect that BootOrder EFI variable
is not defined. With this commit, the BootOrder EFI variable is
automatically added when the disk is detected. The original
efi_secboot tests end up with unexpected failure.
The efi_secboot tests need to be modified to explicitly set
the BootOrder EFI variable.
squashfs and erofs ls tests are also affected by this modification,
need to clear the previous state before squashfs ls test starts.
Co-developed-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
- squashfs improvements, remove common.h in some places, assorted code
fixes, fix a few CONFIG symbol names in Kconfig files, bring in
linux's <linux/time.h> conversion functions, poplar updates, bcb
improvements.
|
|
The description of the sysreset request method in <sysreset.h> says that
the return value should be -EPROTONOSUPPORT if the requested reset type
is not supported by this device.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
env_get can return NULL if it fails to find the variable. Check its result
before using it.
Fixes: 6d9764c2a87 ("dm: test: Add a new test case against dm eth codes for NULL pointer access")
Fixes: df33fd28897 ("test: eth: Add test for ethernet addresses")
Signed-off-by: Sean Anderson <seanga2@gmail.com>
|
|
This converts the spi load method to use spl_load. The address used for
LOAD_FIT_FULL may be different, but there are no in-tree users of that
config. Since payload_offs is only used without OS_BOOT, we defer its
initialization.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This converts the blk load method (used exclusively by NVMe) to use
spl_load. As a consequence, it also adds support for LOAD_FIT_FULL and
IMX images.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This converts the nor load method to use spl_load. As a result it also
adds support for LOAD_FIT_FULL. Since this is the last caller of
spl_load_legacy_img, it has been removed.
We can't load FITs with external data with SPL_LOAD_FIT_FULL, so disable the
test in that case. No boards enable SPL_NOR_SUPPORT and SPL_LOAD_FIT_FULL, so
this is not a regression.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This converts the net load method to use spl_load. As a result, it also
adds support for LOAD_FIT_FULL and IMX images.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This converts the nand load method to use spl_load. nand_page_size may not
be valid until after nand_spl_load_image is called (see e.g. fsl_ifc_spl),
so we set bl_len in spl_nand_read. Since spl_load reads the header for us,
we can remove that argument from spl_nand_load_element.
There are two possible regressions which could result from this commit.
First, we ask for a negative address from spl_get_load_buffer. That is,
instead of
header = spl_get_load_buffer(0, sizeof(*header));
we do
header = spl_get_load_buffer(-sizeof(*header), sizeof(*header));
this could cause a problem if spl_get_load_buffer does not return valid
memory for negative offsets. Second, we now set bl_len for legacy images.
This can cause memory up to a bl_len - 1 before the image load address to
be written, which might not have been the case before. If this turns out to
be a problem, we can add an option for a bounce buffer.
We can't load FITs with external data with SPL_LOAD_FIT_FULL, so disable the
test in that case. No boards enable SPL_NAND_SUPPORT and SPL_LOAD_FIT_FULL, so
this is not a regression.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This converts the mmc loader to spl_load. Legacy images are handled by
spl_load (via spl_parse_image_header), so mmc_load_legacy can be
omitted. To accurately determine whether mmc_load_image_raw_sector is used
(which might not be the case if SYS_MMCSD_FS_BOOT is enabled), we introduce
a helper config SYS_MMCSD_RAW_MODE. This ensures we can inline spl_load
correctly when a board only boots from filesystems. We still need to check
for SPL_MMC, since some boards enable configure raw mode even without MMC
support.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This converts the fat loader to use spl_load. Some platforms are very
tight on space, so we take care to only include the code we really need.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This converts the ext load method to use spl_load. As a consequence, it
also adds support for FIT and IMX images.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
These will soon be supported, so we need to be able to test it. Export the
lzma data and generally use the same process in spl_test_mmc_fs as
do_spl_test_load. If we end up needing this in third place in the future,
it would probably be good to refactor things out.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Aligning addresses and sizes causes overhead which is unnecessary when we
are not loading from block devices. Remove bl_len when it is not needed.
For example, on iot2050 we save 144 bytes with this patch (once the rest of
this series is applied):
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-144 (-144)
Function old new delta
spl_load_simple_fit 920 904 -16
load_simple_fit 496 444 -52
spl_spi_load_image 384 308 -76
Total: Before=87431, After=87287, chg -0.16%
We use panic() instead of BUILD_BUG_ON in spl_set_bl_len because we still
need to be able to compile it for things like mmc_load_image_raw_sector,
even if that function will not be used.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
For filesystems, filename serves the same purpose as priv. However,
spl_load_fit_image also uses it to determine whether to use a DMA-aligned
buffer. This is beneficial for FAT, which uses a bounce-buffer if the
destination is not DMA-aligned. However, this is unnecessary now that
filesystems set bl_len to ARCH_DMA_MINALIGN instead. With this done, we can
remove filename entirely.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Simplify things a bit for callers of spl_load_info->read by refactoring it
to use units of bytes instead of bl_len. This generally simplifies the
logic, as MMC is the only loader which actually works in sectors. It will
also allow further refactoring to remove the special-case handling of
filename. spl_load_legacy_img already works in units of bytes (oops) so it
doesn't need to be changed.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
To quote the author:
This series tests raw nand flash in sandbox and fixes various bugs discovered in
the process. I've tried to do things in a contemporary manner, avoiding the
(numerous) variations present on only a few boards. The test is pretty minimal.
Future work could test the rest of the nand API as well as the MTD API.
Bloat (for v1) at [1] (for boards with SPL_NAND_SUPPORT enabled). Almost
everything grows by a few bytes due to nand_page_size. A few boards grow more,
mostly those using nand_spl_loaders.c. CI at [2].
[1] https://gist.github.com/Forty-Bot/9694f3401893c9e706ccc374922de6c2
[2] https://source.denx.de/u-boot/custodians/u-boot-clk/-/pipelines/18443
|
|
Add a SPL test for the NAND load method. We use some different functions to
do the writing from the main test since things like nand_write_skip_bad
aren't available in SPL.
We disable BBT scanning, since scan_bbt is only populated when not in SPL.
We use nand_spl_loaders.c as it seems to be common to at least a few boards
already. However, we do not use nand_spl_simple.c because it would require
us to implement cmd_ctrl. The various nand load functions are adapted from
omap_gpmc. However, they have been modified for simplicity/correctness.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
|
|
Add a sandbox NAND flash driver to facilitate testing. This driver supports
any number of devices, each using a single chip-select. The OOB data is
stored in-band, with the separation enforced through the API.
For now, create two devices to test with. The first is a very small device
with basic ECC. The second is an 8G device (chosen to be larger than 32
bits). It uses ONFI, with the values copied from the datasheet. It also
doesn't need too strong ECC, which speeds things up.
Although the nand subsystem determines the parameters of a chip based on
the ID, the driver itself requires devicetree properties for each
parameter. We do not derive parameters from the ID because parsing the ID
is non-trivial. We do not just use the parameters that the nand subsystem
has calculated since that is something we should be testing. An exception
is made for the ECC layout, since that is difficult to encode in the device
tree and is not a property of the device itself.
Despite using file I/O to access the backing data, we do not support using
external files. In my experience, these are unnecessary for testing since
tests can generally be written to write their expected data beforehand.
Additionally, we would need to store the "programmed" information somewhere
(complicating the format and the programming process) or try to detect
whether block are erased at runtime (degrading probe speeds).
Information about whether each page has been programmed is stored in an
in-memory buffer. To simplify the implementation, we only support a single
program per erase. While this is accurate for many larger flashes, some
smaller flashes (512 byte) support multiple programs and/or subpage
programs. Support for this could be added later as I believe some
filesystems expect this.
To test ECC, we support error-injection. Surprisingly, only ECC bytes in
the OOB area are protected, even though all bytes are equally susceptible
to error. Because of this, we take care to only corrupt ECC bytes.
Similarly, because ECC covers "steps" and not the whole page, we must take
care to corrupt data in the same way.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
|
|
Return an error when the user does not select an OS, so we know whether
to boot or not.
Move calling of bootflow_menu_run() into a separate function so we can
call it from other places.
Expand the test to cover these cases.
Add some documentation also, while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Adjust scan_mmc4_bootdev() and related function so that the caller can
do its own 'bootflow scan' command. This allows it to change the flags
if needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Replace instances of http://www.ti.com with https://www.ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Fix an issue reported by Coverity scan, and fix code indentation.
Addresses-Coverity-ID: 467404 ("Control flow issues (DEADCODE)")
Signed-off-by: Alexander Gendin <agendin@matrox.com>
|
|
The primary motivation for having a sandbox without LTO build in CI is
to ensure that we don't have that option break. We now have the ability
to run tests of specific options being enabled/disabled, so drop the
parts of CI that build and test that configuration specifically and add
a build test instead. We still test that "NO_LTO=1" rather than editing
the config file works via the ftrace tests.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Now that everything is working, add a test to make sure that this
builds correctly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Many tests make some use of the command line, so require it for all test
code.
This could be teased apart, perhaps with a test flag indicating that it
uses the command line. Leave that for later.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
The baudrate configured in .config is taken by default by serial. If
change of baudrate is required then the .config needs to changed and
u-boot recompilation is required or the u-boot environment needs to be
updated.
To avoid this, support is added to fetch the baudrate directly from the
device tree file and update.
The serial, prints the log with the configured baudrate in the dtb.
The commit c4df0f6f315c ("arm: mvebu: Espressobin: Set default value for
$fdtfile env variable") is taken as reference for changing the default
environment variable.
The default environment stores the default baudrate value, When default
baudrate and dtb baudrate are not same glitches are seen on the serial.
So, the environment also needs to be updated with the dtb baudrate to
avoid the glitches on the serial.
Also add test to cover this new function.
Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20230921112043.3144726-3-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
Two bugs have appeared:
- arguments can have an equals sign embedded in them, which must be
considered part of the value
- arguments must fully match the name; partial matches should be
ignored
Fix these and add a test to cover both.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
https://source.denx.de/u-boot/custodians/u-boot-tpm
bootX measurements and measurement API moved to u-boot core:
Up to now, U-Boot could perform measurements and EventLog creation as
described by the TCG spec when booting via EFI.
The EFI code was residing in lib/efi_loader/efi_tcg2.c and contained
both EFI specific code + the API needed to access the TPM, extend PCRs
and create an EventLog. The non-EFI part proved modular enough and
moving it around to the TPM subsystem was straightforward.
With that in place we can have a common API for measuring binaries
regardless of the boot command, EFI or boot(m|i|z), and contructing an
EventLog.
I've tested all of the EFI cases -- booting with an empty EventLog and
booting with a previous stage loader providing one and found no
regressions. Eddie tested the bootX part.
Eddie also fixed the sandbox TPM which couldn't be used for the EFI code
and it now supports all the required capabilities. This had a slight
sideeffect in our testing since the EFI subsystem initializes the TPM
early and 'tpm2 init' failed during some python tests. That code only
opens the device though, so we can replace it with 'tpm2 autostart'
which doesn't error out and still allows you to perfom the rest of the
tests but doesn't report an error if the device is already opened.
There's a few minor issues with this PR as well but since testing and
verifying the changes takes a considerable amount of time, I prefer
merging it now.
Heinrich has already sent a PR for -master containing "efi_loader: fix
EFI_ENTRY point on get_active_pcr_banks" and I am not sure if that will
cause any conflicts, but in any case they should be trivial to resolve.
Both the EFI and non-EFI code have a Kconfig for measuring the loaded
Device Tree. The reason this is optional is that we can't reason
when/if devices add random info like kaslr-seed, mac addresses etc in
the DT. In that case measurements are random, board specific and
eventually useless. The reason it was difficult to fix it prior to this
patchset is because the EFI subsystem and thus measurements was brought
up late and DT fixups might have already been applied. With this
patchset we can measure the DT really early in the future.
Heinrich also pointed out that the two Kconfigs for the DTB measurements
can be squashed in a single one and that the documentation only explains
the non-EFI case. I agree on both but as I said this is a sane working
version, so let's pull this first it's aleady big enough and painful to
test.
|
|
commit 789ed2784256 ("test/py: replace 'tpm2 init, startup, selftest' sequences")
changed some of the tpm2 init sequences to 'tpm2 autostart' instead of
calling 'tpm init', 'tpm startup TPM2_SU_CLEAR', 'tpm2 self_test full'.
The autostart command calls the afforementioned sequence and on top of
that deals with the 'tpm2 init' return codes if the tpm is already
started. Since we initialize the tpm from various subsystems now,
replace the last remaining instances of 'tpm2 init' with 'tpm2
autostart'. Since the latter calls 'tpm2 init' anyway we will still be
implicitly testing the validity of that command
It's worth noting that since 'tpm2 autostart' performs the startup and
self tests sequences of the tpm we could drop
'test_tpm2_sandbox_self_test_full' and 'test_tpm2_startup, but let's
keep the since they test tpm commands and options
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
We currently use PCR 0 for testing the PCR read/extend functionality in
our selftests. How ever those PCRs are defined by the TCG spec for
platform use. For example if the tests run *after* the efi subsystem
initialization, which extends PCRs 0 & 7 it will give a false positive.
So let's switch over to a PCR which is more suitable and is defined for
OS use. It's worth noting that we are using PCR10 here, since PCR9 is
used internally by U-Boot if we choose to measure the loaded DTB
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Use the sandbox TPM driver to measure some boot images in a unit
test case.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
This ut has tests for the SCMI power domain protocol as well as DM
interfaces for power domain devices.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Current code allows up to 3 MBR partitions without extended one.
If more than 3 partitions are required, then extended partition(s)
must be used.
This commit allows up to 4 primary MBR partitions without the
need for extended partition.
Add mbr test unit. In order to run the test manually, mmc6.img file
of size 12 MiB or greater is required in the same directory as u-boot.
Test also runs automatically via ./test/py/test.py tool.
Running mbr test is only supported in sandbox mode.
Signed-off-by: Alex Gendin <agendin@matrox.com>
[ And due to some further changes for testing ]
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Unexpected 'Esc' key presses are accumulated internally, even if it is
already clear that the current escape sequence is invalid. This results
in weird behaviour. For example, the next character after 'Esc' key
simply disappears from input and 'Unknown command' is printed
after 'Enter'.
This commit fixes some issues with extra 'Esc' keys entered by user:
1. Sequence <Esc><Esc><Enter> right after autoboot stop gives:
=>
nknown command 'ry 'help'
=>
2. Sequence <Esc><p><r><i><Enter> gives:
=> ri
Unknown command 'ri' - try 'help'
=>
3. Extra 'Esc' key presses break backspace functionality.
Signed-off-by: Yurii Monakov <monakov.y@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Add Board: rk3588 NanoPC-T6, Orange Pi 5, Orange Pi 5 Plus;
- clk driver fix for rk3568 and rk3588;
- rkmtd cmd support for rockchip nand device;
- dts update and sync from linux;
|
|
Add Rockchip rkmtd test:
Create/attach/detach RKMTD device.
Send/read data with Rockchip boot block header.
Test that reusing the same label should work.
Basic test of 'rkmtd' commands.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
When the boot_targets environment variable is used with the distro-boot
scripts, each device is included individually. For example, if there
are three mmc devices, then we will have something like:
boot_targets="mmc0 mmc1 mmc2"
In contrast, standard boot supports specifying just the uclass, i.e.:
boot_targets="mmc"
The intention is that this should scan all MMC devices, but in fact it
currently only scans the first.
Update the logic to handle this case, without required BOOTSTD_FULL to
be enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Date Huang <tjjh89017@hotmail.com>
Reported-by: Vincent Stehlé <vincent.stehle@arm.com>
Reported-by: Ivan Ivanov <ivan.ivanov@suse.com>
Tested-by: Ivan T.Ivanov <iivanov@suse.de>
|
|
The current logic for "bootflow mmc" is flawed since it checks the
uclass of the bootdev instead of its parent, the media device. Correct
this and add a test that covers this scenario.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Ivan T.Ivanov <iivanov@suse.de>
|
|
Scan the USB bus as well, so we can check that different uclasses work
correctly in boot_targets
update the function comment with more detail.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Ivan T.Ivanov <iivanov@suse.de>
|
