summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2018-05-29configs: remove redundant comment sectionsChris Packham2-12/+0
mv-common.h and mv-plug-common.h still had comments delimiting sections of configuration options that have all been moved to Kconfig by previous treewide efforts. Remove the redundant comment sections. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-29configs: remove empty #ifdef block from mv-common.hChris Packham1-6/+0
The last option guarded by this ifdef was removed in commit 68d534201733 ("sf: Move SPI flash drivers to defconfig"). Remove the now empty ifdef/endif block and the associated comment. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-29ARM: kirkwood: Add device-tree for netspace & inetspaceChris Packham1-0/+9
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-29ARM: kirkwood: Add device-tree for d2net_v2 & net2big_v2Chris Packham1-0/+18
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-28phy: sun4i-usb: Add a sunxi specific function for setting squelch-detectJagan Teki1-0/+8
The sunxi otg phy has a bug where it wrongly detects a high speed squelch when reset on the root port gets de-asserted with a lo-speed device. The workaround for this is to disable squelch detect before de-asserting reset, and re-enabling it after the reset de-assert is done. Add a sunxi specific phy function to allow the sunxi-musb glue to do this. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-28phy: sun4i-usb: Add id_detect and vbus_detect opsJagan Teki1-0/+26
ID and VBUS detection code require when musb changing between Host and/or Peripheral modes. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Jun Nie <jun.nie@linaro.org>
2018-05-27add FIT data-position & data-offset property supportKelvin Cheung1-0/+2
Add FIT data-position & data-offset property support for bootm, which were already supported in SPL. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
2018-05-27dm: serial: Add setparityPatrick Delaunay1-0/+16
Implements serial setparity ops to allow uart parity change. It allows to select ODD, EVEN or NONE parity. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-27ram: stm32_sdram: Adds stm32f429-disco fixes for HardFault at bootingRadoslaw Pietrzyk1-3/+3
- adds reading FMC swap setting from DTB to SDRAM driver - sets FMC swap for stm32f429-disco board - changes ram start address to 0x90000000 Signed-off-by: Radoslaw Pietrzyk <radoslaw.pietrzyk@gmail.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-27mach-snapdragon: Introduce pinctrl driverRamon Fried1-0/+22
This patch adds pinmux and pinctrl driver for TLMM subsystem in snapdragon chipsets. Currently, supporting only 8016, but implementation is generic and 8096 can be added easily. Driver is using the generic dt-bindings and doesn't introduce any new bindings (yet). Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-26PCI: Document pciauto_region_allocate()Tuomas Tynkkynen1-0/+13
Add a doc comment for pciauto_region_allocate(). Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-26PCI: autoconfig: Don't allocate 64-bit addresses to 32-bit only resourcesTuomas Tynkkynen1-1/+1
Currently, if we happen to allocate an address requiring 64 bits to a device only supporting 32-bit BARs, the address eventually gets silently truncated to 32 bits. Avoid this by adding a new flag to pciauto_region_allocate() to bail out in such situations. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-26tpm: add PCR authentication commands supportMiquel Raynal1-0/+29
Add support for the TPM2_PCR_SetAuthPolicy and TPM2_PCR_SetAuthValue commands. Change the command file and the help accordingly. Note: These commands could not be tested because the TPMs available do not support them, however they could be useful for someone else. The user is warned by the command help. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-26tpm: add TPM2_HierarchyChangeAuth command supportMiquel Raynal1-0/+14
Add support for the TPM2_HierarchyChangeAuth command. Change the command file and the help accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-26tpm: add dictionary attack mitigation commands supportMiquel Raynal1-0/+25
Add support for the TPM2_DictionaryAttackParameters and TPM2_DictionaryAttackLockReset commands. Change the command file and the help accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-26tpm: add TPM2_GetCapability command supportMiquel Raynal1-0/+14
Add support for the TPM2_GetCapability command. Change the command file and the help accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-26tpm: add TPM2_PCR_Read command supportMiquel Raynal1-0/+13
Add support for the TPM2_PCR_Read command. Change the command file and the help accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-26tpm: add TPM2_PCR_Extend command supportMiquel Raynal1-0/+10
Add support for the TPM2_PCR_Extend command. Change the command file and the help accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-26tpm: add TPM2_Clear command supportMiquel Raynal1-0/+11
Add support for the TPM2_Clear command. Change the command file and the help accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-26tpm: add TPM2_SelfTest command supportMiquel Raynal1-0/+9
Add support for the TPM2_Selftest command. Change the command file and the help accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-26tpm: add TPM2_Startup command supportMiquel Raynal1-0/+9
Add support for the TPM2_Startup command. Change the command file and the help accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-26tpm: prepare support for TPMv2.x commandsMiquel Raynal2-0/+134
Choice between v1 and v2 compliant functions is done with the configuration. Create the various files that will receive TPMv2-only code on the same scheme as for the TPMv1 code. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-26tpm: add missing parameter in private data structure descriptionMiquel Raynal1-0/+1
Both parameters 'duration_ms' and 'retry_time_ms' of the tpm_chip_priv structure are documented is the comment above the declaration but 'buf' was forgotten. Add the missing description. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-26tpm: disociate TPMv1.x specific and generic codeMiquel Raynal2-199/+225
There are no changes in this commit but a new organization of the code as follow. * cmd/ directory: > move existing code from cmd/tpm.c in cmd/tpm-common.c > move specific code in cmd/tpm-v1.c > create a specific header file with generic definitions for commands only called cmd/tpm-user-utils.h * lib/ directory: > move existing code from lib/tpm.c in lib/tpm-common.c > move specific code in lib/tpm-v1.c > create a specific header file with generic definitions for the library itself called lib/tpm-utils.h * include/ directory: > move existing code from include/tpm.h in include/tpm-common.h > move specific code in include/tpm-v1.h Code designated as 'common' is compiled if TPM are used. Code designated as 'specific' is compiled only if the right specification has been selected. All files include tpm-common.h. Files in cmd/ include tpm-user-utils.h. Files in lib/ include tpm-utils.h. Depending on the specification, files may include either (not both) tpm-v1.h or tpm-v2.h. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Fix a few more cases of tpm.h -> tpm-v1.h, some Kconfig logic] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-25tpm: fix spellingMiquel Raynal1-4/+4
Fix following checkpatch.pl issues in TPM-related code: CHECK: '<x>' may be misspelled - perhaps '<y>'? Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-25tpm: use the BIT() macro where applicableMiquel Raynal1-7/+7
Fix following checkpatch.pl issue in TPM-related code: CHECK: Prefer using the BIT macro Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-25tpm: substitute deprecated uint<x>_t types with their u<x> equivalentMiquel Raynal1-38/+34
Fix following checkpatch.pl issues in TPM-related code: CHECK: Prefer kernel type 'u8' over 'uint8_t' CHECK: Prefer kernel type 'u16' over 'uint16_t' CHECK: Prefer kernel type 'u32' over 'uint32_t' Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-24Merge tag 'arc-uart-updates-for-2018.07-rc1' of git://git.denx.de/u-boot-arcTom Rini1-10/+0
Add support for DEBUG_UART on ARC devboards This required us to do 2 things: 1) Insert a call to debug_uart_init() in early boot code 2) Convert serial_arc to Kconfig Once both items above are done we just patched defconfigs.
2018-05-24Merge tag 'signed-rpi-next' of git://github.com/agraf/u-bootTom Rini1-25/+36
Patch queue for rpi - 2018-05-24 Some minor fixes for the Raspberry Pi: - Fix SD writes on new sdhost controller - Sanitize default load addresses, allowing for better payload placement
2018-05-24serial: Convert ARC_SERIAL to KconfigAlexey Brodkin1-10/+0
One step closer to completely Kconfig-driven target configuration in U-Boot :) Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-05-24rpi: Change load addresses to make more room for the kernel & DTBTuomas Tynkkynen1-25/+36
As of Linux 4.16, a multiplatform AArch64 kernel with our distro config takes 26M. The current space reservation leaves only 17M for the kernel and if it goes over it, the initrd gets overwritten when loading the kernel from the filesystem. A similar problem happens on ARMv7 with the DTBs taken from the downstream Raspberry Pi foundation kernel. I guess they compile them with DT overlay support enabled which grows them just enough. Fix both of these problems by rewriting the memory map, which now allows kernels to be up to 36M and DTBs up to 1M. Also the comment block was kind of obsolete ever since the introduction of AArch64 support and the firmware-loaded DTB doesn't get placed at 0x100 anymore either, so that is fixed as well. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-05-24fit: Add standalone image type handlingMarek Vasut1-0/+1
Just add IH_TYPE_STANDALONE to fit_get_image_type_property(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-24configs: sama5d2_xplained: fix bootcmd/args for spi+emmc demoEugen Hristev1-0/+9
For sama5d2_xplained_spiflash_defconfig, we have the demo layout as presented on this link: http://www.at91.com/linux4sam/bin/view/Linux4SAM/Sama5d2XplainedMainPage#SPI_eMMC_Flash_demo_Memory_map on SPI Flash (4 Mbyte) we have Bootstrap (second level bootloader), U-boot + env and kernel+dtb we keep on eMMC on single partition in /boot directory, formatted with ext4. Thus, changing the boot command to reflect this demo for the spiflash config, and fixing up bootargs. Sama5d2_xplained does not have NAND flash, so the bootargs were completely wrong. Fixes: "5abc1a45": common: Move CONFIG_BOOTARGS to Kconfig Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-05-24i2c: Drop CONFIG_TSI108_I2CTuomas Tynkkynen1-207/+0
Last user of this driver went away in June 2015 in commit d928664f4101e24 ("powerpc: 74xx_7xx: remove 74xx_7xx cpu support") Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Acked-by: Heiko Schocher <hs@denx.de>
2018-05-24net: Drop CONFIG_TSI108_ETHTuomas Tynkkynen1-1/+0
Last user of this driver went away in June 2015 in commit d928664f4101e24 ("powerpc: 74xx_7xx: remove 74xx_7xx cpu support") Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-05-24configs: at91: Adjust CONFIG_ENV_OFFSET to match sama5 addressNicolas Ferre7-7/+7
In order to have a single ENV_OFFSET to manage, use the same as the sama5 one. This address matches our NAND flash map available at: http://www.at91.com/linux4sam/bin/view/Linux4SAM/Sama5d3XplainedMainPage#NAND_Flash_demo_Memory_map Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> [eugen.hristev@microchip.com: rework on latest version of u-boot] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-05-24configs: at91: sama5_common: Adjust CONFIG_ENV_OFFSET to match block alignmentNicolas Ferre1-1/+1
Fix the unaligned environment address. This address matches our NAND flash map available at: http://www.at91.com/linux4sam/bin/view/Linux4SAM/Sama5d3XplainedMainPage#NAND_Flash_demo_Memory_map Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> [eugen.hristev@microchip.com: rework on latest version of u-boot] Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-05-24FIT: Make fit_conf_print() be a static functionTom Rini1-2/+0
We only call fit_conf_print from one place in the code, so mark it as static and move it up to where we call it. This in turn has us move a few other already static functions up further as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-24Convert CONFIG_SUPPORT_EMMC_RPMB to KconfigAlex Kiernan2-2/+0
Convert CONFIG_SUPPORT_EMMC_RPMB to Kconfig. Split the command handling from the underlying support and expose this through CMD_MMC_RPMB. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-05-23rpi: Adjust fdt_addr_r to a sane addressAlexander Graf1-1/+1
Back in the old days, 0x100 was used as the address to pass the device tree from firmware into the kernel. This has since changed to a more dynamic location, so using 0x100 actually breaks more things than it helps with. Let's move the device tree default location for distro boot to a more sane place that gives us enough head room in low memory. Reported-by: Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-05-22ARM: uniphier: rename environment variable fdt_file to fdtfileMasahiro Yamada1-2/+2
For booting Linux in the generic distro mechanism, cmd/pxe.c retrieves the FDT file name from "fdtfile" environment variable. Rename "fdt_file" to "fdtfile" for easier migration to distro boot. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-20Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini1-27/+3
2018-05-20Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini9-17/+9
2018-05-20Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2-22/+25
2018-05-20ARM: rmobile: Update V2H BlancheMarek Vasut1-27/+3
The V2H Blanche port was broken since some time. This patch updates the V2H Blanche port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-19Fixup various SPDX tags from the latest mergeTom Rini2-4/+2
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-18arm64: zynqmp: Use DWC3 generic driver and DM_USBMichal Simek8-17/+0
Remove harcoded XHCI lists and detect mode, speed based on DT. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Serial-changes: 2 - Remove also XHCI macros from hardware.h - Remove additional new line in zcu106
2018-05-18usb: common: add support to get maximum speed from dtMugunthan V N1-0/+9
Add support to get maximum speed from dt so that usb drivers makes use of it for DT parsing. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> (rebase and fix errors) Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-18ARM: socfpga: Enable SPL memory allocationTien Fong Chee1-1/+22
Enable memory allocation in SPL for preparation to enable FAT in SPL. Memory allocation is needed by FAT to work properly. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
2018-05-18ARM: socfpga: Convert to DM serialMarek Vasut1-8/+0
Pull the serial port configuration from DT and use DM serial instead of having the serial configuration in two places, DT and board config. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-09-23 03:15:18 +0300