summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2021-07-15pci: Use const for pci_find_device_id() etc.Simon Glass1-2/+2
These functions don't modify the device-ID struct that is passed in, so mark the argument as const, so the data structure can be declared that way. This allows it to be placed in the rodata section. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-07-15mmc: mmc_get_op_cond: Allow quiet detection of eMMCPali Rohár1-1/+2
Add a new 'quiet' argument to mmc_get_op_cond() function which avoids printing error message when SD/eMMC card is not detected. Espressobin and mx6cuboxi boards use this function for detecting presence of eMMC and therefore it is expected and normal that eMMC does not have to be connected. So error message "Card did not respond to voltage select!" should be skipped in this case as it is not an error. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-14power: pmic: Add driver for ST-Ericsson AB8500 via PRCMUStephan Gerhold1-0/+125
All devices based on ST-Ericsson Ux500 use a PMIC similar to AB8500 (Analog Baseband). There is AB8500, AB8505, AB9540 and AB8540 although in practice only AB8500 and AB8505 are relevant since the platforms with AB9540 and AB8540 were cancelled and never used in production. In general, the AB8500 PMIC uses I2C as control interface, where the different register banks are represented as separate I2C devices. However, in practice AB8500 is always connected to a special I2C bus on the DB8500 SoC that is controlled by the power/reset/clock management unit (PRCMU) firmware. Add a simple driver that allows reading/writing registers of the AB8500 PMIC. The driver directly accesses registers from the PRCMU parent device (represented by syscon in U-Boot). Abstracting it further (e.g. with the i2c uclass) would not provide any advantage because the PRCMU I2C bus is always just connected to AB8500 and vice-versa. The ab8500.h header is mostly taken as-is from Linux (with some minor adjustments) to allow using similar code in both Linux and U-Boot. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-14board: stemmy: Copy atags for booting downstream/vendor kernelStephan Gerhold1-0/+3
The U-Boot "stemmy" board is mainly intended to simplify booting mainline Linux on various smartphones from Samsung based on ST-Ericsson Ux500. While the mainline kernel is working great, there are still some features missing there. In particular, it is currently not possible to charge the battery when using the mainline kernel. This means that it is still necessary to boot the downstream/vendor kernel from Samsung sometimes to charge the device. That kernel is ancient, still uses board files + ATAGS instead of device trees and relies on a strange very long kernel command line hardcoded in the Samsung bootloader. Actually, since mainline is booted with device trees there is a very simple way to make the old downstream kernel work as well: We can simply take most of the ATAGS passed to U-Boot from the Samsung bootloader and copy them as-is when booting a kernel without device tree. That way the long command line and other needed ATAGS are copied as-is without having to bother with them. The only exception is the ATAG_INITRD - since the initrd is loaded by U-Boot, the atag for that should be generated in U-Boot so it points to the correct address. All other ATAGS are copied as-is and not generated in U-Boot. Also use the chance and provide a serial# for U-Boot by parsing the ATAG_SERIAL that is also passed by the Samsung bootloader. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2021-07-14board: stemmy: Parse atags to get available memoryStephan Gerhold1-13/+10
At the moment the "stemmy" board attempts to detect the RAM size with a simple memory test (get_ram_size()). Unfortunately, this does not work correctly for devices with 768 MiB RAM (e.g. Samsung Galaxy Ace 2 (GT-I8160), "codina"). Reading/writing memory after the 768 MiB RAM succeeds but actually overwrites some earlier parts of the memory. For U-Boot this does not result in any major problems, but on Linux this will eventually lead to strange crashes because of the memory corruption. Since the "stemmy" U-Boot port is designed to be chainloaded from the original Samsung bootloader, the most reliable way to get the available amount of RAM is to look at the ATAGS passed by the Samsung bootloader. Fortunately, the header used to generate ATAGS in U-Boot (asm/setup.h) can also be easily used to parse them. Also clarify and simplify stemmy.h a bit to make it more clear where some of the magic values in there are actually coming from. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2021-07-14configs: uniphier: Enable CONFIG_SYS_PCI_64BITKunihiko Hayashi1-0/+2
Enable CONFIG_SYS_PCI_64BIT to allow 64bit access to PCI space. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
2021-07-12fs: fat: add file attributes to struct fs_direntHeinrich Schuchardt1-4/+18
When reading a directory in the UEFI file system we have to return file attributes and timestamps. Copy this data to the directory entry structure. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-10spl: mmc: Factor out eMMC boot partition selection codeMarek Vasut1-0/+23
Factor out eMMC boot partition selection code into default_spl_mmc_emmc_boot_partition() function and implement weak spl_mmc_emmc_boot_partition(), so that architecture or board code can override the eMMC boot partition selection. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Harald Seiler <hws@denx.de> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Simon Glass <sjg@chromium.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-07-10net: add set_promisc function to enable/disable Promiscuous modeTim Harvey1-0/+2
Enabling promiscuous mode can be useful for DSA switches where each port has its own MAC address. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-07-10board: phytec: phycore_imx8mp: Add fec supportTeresa Remmet1-0/+17
Enable support for the fec ethernet on phyCORE-i.MX8MP. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-10board: phytec: phycore_imx8mp: Change debug UARTTeresa Remmet1-2/+2
With the first redesign the debug UART had changed from UART2 to UART1. As the first hardware revision is considered as alpha and will not be supported in future. The old setup will not be preserved. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-10smegw01: Allow booting the Yocto image by defaultFabio Estevam1-3/+3
On the Yocto image there is a single partition and the kernel and dtb are present in the 'boot' directory. Change it accordingly so that the board can boot the Yocto image by default. Use the generic 'load' command instead, which is able to read from an ext4 partition. Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-07-10imx: ventana: increase SYS_BOOTM_LENTim Harvey1-0/+3
Increase SYS_BOOM_LEN from the default 16M in imx6_common to 64M. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-07-08arm: mvebu: a37xx: Enable more baudratesPali Rohár2-4/+14
Extend CONFIG_SYS_BAUDRATE_TABLE and include all standard baudrates and also nonstandard up to the 6 MBaud. U-Boot's A3720 UART driver can use baudrates from 300 Baud to 6 MBaud. This changes all A3720 boards, since all of them include either mvebu_armada-37xx.h or turris_mox.h config file. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-08Revert "arm: Remove nsa310s board"Tom Rini1-0/+59
While this platform has not yet been converted, there is active efforts to do so. Keep the platform for now. This reverts commit aa697e6904ba1b3144a46ec642d4695e7c0cdc3e. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove spear600 boards and the rest of SPEAr supportTom Rini3-426/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is the last of the SPEAr platforms, so remove the rest of the remaining support as well. Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove spear320 boardsTom Rini1-2/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is also the last SPEAR3XX platform, remove that symbol as well. Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove spear310 boardsTom Rini1-2/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove spear300 boardsTom Rini2-143/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove nsa310s boardTom Rini1-59/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove it Cc: Gerald Kerma <dreagle@doukki.net> Cc: Tony Dinh <mibodhi@gmail.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove gplugd boardTom Rini1-75/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove it Cc: Ajay Bhargav <contact@8051projects.net> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove edb9315a boardTom Rini1-184/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove it. This is also the last PL010_SERIAL using board, so remove those references. Cc: Sergey Kostanbaev <sergey.kostanbaev@fairwaves.ru> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove at91rm9200ek boardsTom Rini1-162/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. Cc: Andreas Bießmann <andreas@biessmann.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove MPC832XEMDS boardsTom Rini1-302/+0
These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove MPC8323ERDB boardTom Rini1-309/+0
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove MPC8315ERDB boardTom Rini2-407/+2
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. As this is the last ARCH_MPC8315 platform, remove that support as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove sbc8641d boardTom Rini2-514/+0
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. This is also the last of the ARCH_MPC8641/MPC8610 platforms, so remove that support as well. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-08ppc: Remove xpedite boardsTom Rini4-2081/+0
These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this includes the last ARCH_MPC8572 platform, remove that as well. Cc: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Peter Tyser <ptyser@xes-inc.com>
2021-07-08ppc: Remove kmcoge4 boardTom Rini1-416/+0
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. Cc: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove MPC8568MDS boardTom Rini1-400/+0
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. As this is the last ARCH_MPC8568 platform, remove that support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove MPC8555CDS boardsTom Rini1-380/+0
These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is the only ARCH_MPC8555 platform left, remove that support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove MPC8541CDS boardTom Rini1-384/+0
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. As this is the only MPC8541 target left, remove that architecture support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove TQM834x boardTom Rini1-277/+0
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove sbc8548 boardsTom Rini1-540/+0
These boards have not been converted to CONFIG_DM_PCI by the deadline and are also missing conversion to CONFIG_DM. Remove them. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove caddy2 / vme8349 boardsTom Rini2-630/+0
These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove MPC8313ERDB boardsTom Rini2-753/+0
These boards have not been converted to CONFIG_DM_PCI by the deadline. Remove them. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove ve8313 boardTom Rini1-260/+0
This board has not been converted to CONFIG_DM_PCI by the deadline. Remove it. Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Heiko Schocher <hs@denx.de>
2021-07-08ppc: Remove mpc8308_p1m boardTom Rini1-307/+0
This board has not been converted to CONFIG_DM_PCI by the deadline. Remove it. Cc: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove sbc8349 boardTom Rini1-322/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08m68k: Remove M5475x boardsTom Rini2-247/+0
These board has not been converted to CONFIG_DM_PCI by the deadline. Remove them. As this is the last of the mcf547x_8x family of boards, remove that support as well. Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08m68k: Remove M5485 boardsTom Rini1-228/+0
These board has not been converted to CONFIG_DM_PCI by the deadline. Remove them. As this is all of the CONFIG_M548x platforms as well, remove that code. Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08pci: Remove non-DM board_pci_fixup_dev() declarationTom Rini1-6/+0
With the ventana boards migrated to DM_PCI and DM_ETH, we can remove this prototype. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07Merge tag 'dm-pull-6jul21' of https://source.denx.de/u-boot/custodians/u-boot-dmTom Rini1-3/+0
various minor sandbox improvements
2021-07-07bootstage: Eliminate when not enabledTom Rini1-1/+3
When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07Merge branch '2021-07-06-platform-updates'Tom Rini5-12/+210
- mpc8379erdb DM_USB, DM_PCI and DM_ETH support. - Drop PCI support from the integrator family of boards - Add synquacer support - Assorted lpc32xx updates and improvements - snapdragon (and related) fixes, Broadcom iproc update
2021-07-06Kconfig: convert CONFIG_SYS_I2C_LPC32XXTrevor Woerner2-2/+0
Convert the CONFIG_SYS_I2C_LPC32XX configuration symbol from an include directive to a Kconfig value. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-06arm: lpc32xx: add EA LPC3250 DevKitv2 board supportTrevor Woerner1-0/+37
Add basic support for running U-Boot on the Embedded Artists LPC3250 Developer's Kit v2 board by launching U-Boot from the board's s1l loader (which comes pre-installed on the board). Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-07-06lpc32xx: import device tree from LinuxTrevor Woerner1-0/+58
Import the dtsi, dts, and clock binding files for the lpc32xx ea3250 board directly and unmodified from the latest Linux kernel. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-07-06lpc32xx: Kconfig: switch to CONFIG_CONS_INDEXTrevor Woerner2-10/+0
There's nothing special or unique to the lpc32xx that requires its own config parameter for specifying the console uart index. Therefore instead of using the lpc32xx-specific CONFIG_SYS_LPC32XX_UART include parameter, use the already-available CONFIG_CONS_INDEX from Kconfig. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-06configs: synquacer: Enable EFI capsule update supportMasami Hiramatsu1-0/+6
Enable EFI capsule update support. With the EFI capsule update, you can update U-Boot, TF-A and OP-TEE. TF-A and OP-TEE are usually combined as a FIP binary, but if the binary is bigger than 480KB, you have to modify FIP header, split the OP-TEE and stores the OP-TEE binary in the different place. This configuration supports both cases. Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 13:39:24 +0300