summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2021-11-12Convert CONFIG_ENV_IS_IN_SPI_FLASH et al to KconfigTom Rini13-50/+0
This converts the following to Kconfig: CONFIG_ENV_IS_IN_SPI_FLASH CONFIG_ENV_IS_NOWHERE CONFIG_ENV_OFFSET CONFIG_ENV_OVERWRITE CONFIG_ENV_SECT_SIZE CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_FSL_USDHC to KconfigTom Rini10-11/+0
This converts the following to Kconfig: CONFIG_FSL_USDHC Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_FSL_LAYERSCAPE to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_FSL_LAYERSCAPE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_BITBANGMII to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_BITBANGMII Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_DOS_PARTITION to KconfigTom Rini3-3/+0
This converts the following to Kconfig: CONFIG_DOS_PARTITION Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_E1000 to KconfigTom Rini1-3/+0
This converts the following to Kconfig: CONFIG_E1000 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Convert CONFIG_ARCH_CPU_INIT to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_ARCH_CPU_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-12Remove LYNX KDI remaindersThomas Huth2-25/+0
The last board that used to set CONFIG_LYNXKDI has been removed in commit 242836a893ae ("powerpc: ppc4xx: remove pcs440ep support"), doc/README.lynxkdi only talks about a MPC8260 board being supported, and the mpc8260 support has been removed four years ago in commit 2eb48ff7a210d ("powerpc, 8260: remove support for mpc8260") already, and common/lynxkdi.c only consists of an "#error" statement these days, so it seems like the LYNX KDI code is dead code nowadays. Let's remove it now. Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-11-12pxe: Allow calling the pxe_get logic directlySimon Glass1-0/+14
Refactor this code so that we can call the 'pxe get' command without going through the command-line interpreter. This makes it easier to get the information we need, without going through environment variables. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-12pxe: Return the file size from the getfile() functionSimon Glass1-1/+12
It is pretty strange that the pxe code uses the 'filesize' environment variable find the size of a file it has just read. Partly this is because it uses the command-line interpreter to parse its request to load the file. As a first step towards unwinding this, return it directly from the getfile() function. This makes the code a bit longer, for now, but will be cleaned up in future patches. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-12lib: Add a function to convert a string to a hex valueSimon Glass1-2/+14
Add an xtoa() function, similar to itoa() but for hex instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com>
2021-11-12lib: Add tests for simple_itoa()Simon Glass1-1/+12
Add test and a comment for this function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com>
2021-11-12pxe: Drop get_bootfile_path()Simon Glass1-1/+2
This function no longer makes sense, since it is pretty easy to prepend the boot directory to the filename. Drop it and update its only caller. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-12pxe: Clean up the use of bootfileSimon Glass1-3/+16
The 'bootfile' environment variable is read in the bowels of pxe_util to provide a directory to which all loaded files are relative. This is not obvious from the API to PXE and it is strange to make the caller set an environment variable rather than pass this as a parameter. The code is also convoluted, which this feature implemented by get_bootfile_path(). Update the API to improve this. Unfortunately this means that pxe_setup_ctx() can fail, so add error checking. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-12pxe: Move common parsing coding into pxe_utilSimon Glass1-0/+9
Both the syslinux and pxe commands use essentially the same code to parse and run extlinux.conf files. Move this into a common function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-12pxe: Move pxe_utils filesSimon Glass1-0/+205
Move the header file into the main include/ directory so we can use it from the bootmethod code. Move the C file into boot/ since it relates to booting. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Artem Lapkin <email2tema@gmail.com> Tested-by: Artem Lapkin <email2tema@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-11Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini23-270/+56
- device-tree sync-up with Linux for ls1028a - fixes/update in fsl-ddr driver, fsl-validate, lx2162a, fsl-mc, spintable code, configs, qspi node, pci - enable EFI_SET_TIME support in sl28 - powerpc: Drop -mstring
2021-11-10tpm2: Introduce TIS tpm coreIlias Apalodimas1-0/+1
There's a lot of code duplication in U-Boot right now. All the TPM TIS compatible drivers we have at the moment have their own copy of a TIS implementation. So let's create a common layer which implements the core TIS functions. Any driver added from now own, which is compatible with the TIS spec, will only have to provide the underlying bus communication mechanisms. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-10Merge tag 'u-boot-stm32-20211110' of ↵Tom Rini3-23/+82
https://source.denx.de/u-boot/custodians/u-boot-stm - DHSOM update: - Remove nWP GPIO hog - Increase SF bus frequency to 50Mhz and enable SFDP - Disable video output for DHSOM - Disable EFI - Enable DFU_MTD support - Create include file for STM32 gpio driver private data - Split board and SOC STM32MP15 configuration - Device tree alignement with v5.15-rc6 for STM32MP15 - Add binman support for STM32MP15x - Normalise newlines for stm32prog - Update OTP shadow registers in SPL
2021-11-10stm32mp15: replace CONFIG_TFABOOT when it is possiblePatrick Delaunay1-1/+1
In some part of STM32MP15 support the CONFIG_TFABOOT can be replaced by other config: CONFIG_ARMV7_PSCI and CONFIG_ARM_SMCCC. This patch also simplifies the code in cpu.c, stm32mp1_ram.c and clk_stml32mp1.c as execution of U-Boot in sysram (boot without SPL and without TFA) is not supported: the associated initialization code is present only in SPL. This cleanup patch is a preliminary step to support SPL load of OP-TEE in secure world, with SPL in secure world and U-Boot in no-secure world. Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10board: stmp32mp1: split board and SOC STM32MP15 configurationPatrick Delaunay3-22/+81
Add a configuration file "stm32mp15_st_common.h" to handle the STMicroelectronics boards configuration and rename stm32mp1.h to "stm32mp15_common.h" to handle the generic STM32MP15x series configuration. The configuration file "dh_stm32mp1.h" is also renamed to "stm32mp15_dh_dhcom" for the configuration of board based on the dhelectronics STM32MP15x SOM. In the STMicroelectronics board configuration the default bootcmd "bootcmd_stm32mp" is updated to only select the extlinux file found on SD-Card on STM32MP15x EV1 for boot from NOR device. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-09Merge https://source.denx.de/u-boot/custodians/u-boot-samsungTom Rini1-1/+0
[trini: Migrate CONFIG_EXYNOS7420 as part of merging, so espresso7420 still builds] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-09configs: fsl: migrate FMAN/QE specific defines to KconfigRajesh Bhagat17-261/+4
Use moveconfig.py script to convert CONFIG_SYS_FMAN_FW_ADDR, CONFIG_SYS_QE_FW_ADDR and CONFIG_SYS_QE_FMAN_FW_LENGTH to Kconfig and move these entries to defconfigs. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09configs: ls1046aqds: Move CONFIG_SPI_FLASH_* definitions to defconfigsKuldeep Singh1-7/+0
LS1046A-QDS has CONFIG_SPI_FLASH_SST, CONFIG_SPI_FLASH_EON and CONFIG_SPI_FLASH_STMICRO defines present in header. Move these entries from header to defconfigs. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09dm: core: add ofnode_for_each_compatible_node()Michael Walle1-0/+24
Add a helper to iterate over all nodes with a given compatible string. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linuxMichael Walle1-0/+15
Now that everything is prepared, copy the fsl-ls1028a.dtsi from the linux kernel v5.14.12. Notable changes: - second watchdog added - the number of chip selects of the SPI controller is now correct and reflects what the hardware offers - the LPUARTs have the correct clock parent - USB controllers are enabled by default, which was already the case before this sync because all board enabled all the USB controller nodes. A linux patch to fix this is pending. - the eSDHC controller changes from big-endian to little-endian, but that property seems to be not used at all. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09drivers: net: fsl-mc: add a command which dumps the MC logCosmin-Florin Aluchenesei1-0/+9
Extended fsl_mc command adding an extra option dump_log Signed-off-by: Cosmin-Florin Aluchenesei <aluchenesei.cosmin-florin@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09board: sl28: enable EFI UpdateCapsule supportMichael Walle1-0/+2
Enable support for update over EFI UpdateCapsule mechanism. This board doesn't support setting EFI variables after ExitBootservices(). Therefore, we are also enabling EFI_IGNORE_OSINDICATIONS. Signed-off-by: Michael Walle <michael@walle.cc> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-09lx2162a : Rename emmc boot command variableMeenakshi Aggarwal1-2/+2
Rename emmc_bootcmd environment variable to sd2_bootcmd to fix emmc boot on lx2162aqds board. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-11-07efi: Add video support to the appSimon Glass1-3/+3
The current EFI video driver only works when running in the stub. In that case the stub calls boot services (before jumping to U-Boot proper) and copies the graphics info over to the efi table. This is necessary because the stub exits boot services before jumping to U-Boot. The app maintains access to boot services throughout its life, so does not need to do this. Update the driver to support calling boot services directly. Enable video output for the app. Note that this uses the EFI_GRAPHICS_OUTPUT_PROTOCOL protocol, even though it mentions vesa. A sample qemu command-line for this case is: qemu-system-x86_64 -bios /usr/share/edk2.git/ovmf-ia32/OVMF-pure-efi.fd -drive id=disk,file=try.img,if=none,format=raw -nic none -device ahci,id=ahci -device ide-hd,drive=disk,bus=ahci.0 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-07efi: Add a way to obtain boot services in the appSimon Glass1-1/+7
Add a function to return this information along with a stub for the efi_info_get() function, since calling it otherwise hangs U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-07efi_loader: add EFI_TCG2_PROTOCOL.SubmitCommandMasahisa Kojima1-0/+13
This commit adds the EFI_TCG2_PROTOCOL.SubmitCommand required in the TCG PC Client PFP spec. SubmitCommand enables to send the raw command to the TPM device. To implement this api, tpm2_submit_command() is added into tpm-v2.c. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-05Convert CONFIG_BOARD_EARLY_INIT_F et al to KconfigTom Rini10-20/+0
This converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_F CONFIG_BOARD_LATE_INIT CONFIG_DISPLAY_BOARDINFO CONFIG_DISPLAY_BOARDINFO_LATE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05Convert CONFIG_SPL_DRIVERS_MISC et al to KconfigTom Rini25-85/+1
This converts the following to Kconfig: CONFIG_SPL_DRIVERS_MISC CONFIG_SPL_ENV_SUPPORT CONFIG_SPL_GPIO CONFIG_SPL_I2C CONFIG_SPL_LDSCRIPT CONFIG_SPL_LIBCOMMON_SUPPORT CONFIG_SPL_LIBGENERIC_SUPPORT CONFIG_SPL_LOAD_FIT_ADDRESS CONFIG_SPL_MMC CONFIG_SPL_NAND_SUPPORT CONFIG_SPL_NO_CPU_SUPPORT CONFIG_SPL_OS_BOOT CONFIG_SPL_POWER CONFIG_SPL_STACK_R CONFIG_SPL_STACK_R_ADDR CONFIG_SPL_WATCHDOG CONFIG_SPL_TEXT_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05Convert CONFIG_BMP_16BPP to KconfigTom Rini1-1/+0
This converts the following to Kconfig: CONFIG_BMP_16BPP Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05Convert CONFIG_OF_EMBED to KconfigTom Rini5-8/+0
This converts the following to Kconfig: CONFIG_OF_EMBED Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-11-05Convert CONFIG_MCFUART to KconfigTom Rini15-15/+0
This converts the following to Kconfig: CONFIG_MCFUART Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05Convert CONFIG_FEC_MXC to KconfigTom Rini17-18/+0
This converts the following to Kconfig: CONFIG_FEC_MXC Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05Convert CONFIG_SUPPORT_EMMC_BOOT to KconfigTom Rini12-13/+0
This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05Convert CONFIG_SYS_TEXT_BASE to KconfigTom Rini2-2/+0
This converts the following to Kconfig: CONFIG_SYS_TEXT_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-05Convert CONFIG_SYS_HZ to KconfigTom Rini44-74/+0
This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-04watchdog: Automatically register device with sysresetSamuel Holland1-0/+10
Add an option to automatically register watchdog devices with the wdt_reboot driver for use with sysreset. This allows sysreset to be a drop-in replacement for platform-specific watchdog reset code, without needing any device tree changes. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-31bootstage: Add SPL supportMarek Vasut1-1/+1
Allow usage of the bootstage facilities in SPL. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31env: Use static_assert() to check if default_environment is too largeMarek Behún1-0/+6
Check sizeof(default_environment) against ENV_SIZE in a static_assert() instead of runtime. Only check if !USE_HOSTCC (for in fw_env tool ENV_SIZE expands to a variable, and cannot be checked statically) nad !DEFAULT_ENV_INSTANCE_EMBEDDED, for in that case the default_environment variable is not set. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31env: Always use char for default_environmentMarek Behún2-4/+4
Sometimes we use uchar and sometimes char for the default environment array. By always using char, we can get rid of some explicit casts. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31image.h: make image_sign_info.fit point to constHannu Lounento1-1/+1
The data blob apparently does not need to be modified through the fit field of the image_sign_info struct so make it point to const to avoid the need to cast away constness in functions that assign a pointer to const data to the field. fit_image_setup_verify already had to cast away constness as it assigned a const void * argument to the field. The cast can now be removed. Signed-off-by: Hannu Lounento <hannu.lounento@vaisala.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31SoC: exynos: add support for exynos 78x0Dzmitry Sankouski1-0/+112
Samsung Exynos 7880 \ 7870 - SoC for mainstream smartphones and tablets introduced on March 2017. Features: - 8 Cortex A53 cores - ARM Mali-T830 MP3 GPU - LTE Cat. 7 (7880) or 6 (7870) modem Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
2021-10-31board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) boardDzmitry Sankouski1-7/+0
Samsung S9 SM-G9600 - Snapdragon SDM845 version of the phone, for China \ Hong Kong markets. Has unlockable bootloader, unlike SM-G960U (American market version), which allows running u-boot as a chain-loaded bootloader. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-31SoC: qcom: add support for SDM845Dzmitry Sankouski1-0/+33
Hi-end qualcomm chip, introduced in late 2017. Mostly used in flagship phones and tablets of 2018. Features: - arm64 arch - total of 8 Kryo 385 Gold / Silver cores - Hexagon 685 DSP - Adreno 630 GPU Tested only as second-stage bootloader. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Stephan Gerhold <stephan@gerhold.net>
2021-10-31arm: dts: apple: Add preliminary device treesMark Kettenis3-0/+38
Add preliminary device trees for the Apple M1 mini (2020) and Apple M1 Macbook Pro 13" (2020). Device tree bindings for the Apple M1 SoC are still being formalized and these device trees will be synchronized with the Linux kernel as needed. The device trees in this commit are based on the initial Apple M1 device trees from Linux 5.13, nodes for dart, pcie, pinctrl, pmgr, usb based on bindings on track for inclusion in Linux 5.15 and 5.16 and nodes for i2c, mailbox, nvme, pmu, spmi and watchdog that don't have a proposed binding yet. These device trees are provided as a reference only as U-Boot uses the device tree passed by the m1n1 bootloader. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 12:51:06 +0300