summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2021-10-19arm: total_compute: increase DRAM to 8GBUsama Arif1-0/+3
The extra 6GB start at 0x8080000000. Signed-off-by: Usama Arif <usama.arif@arm.com>
2021-10-19ARM: imx: mx5: Add altbootcmd and resets to M53MenloMarek Vasut1-4/+11
Bulletproof the default boot command with reset statements in case any command in the chain would fail. In case a failure were to happen, the board will reset, increment boot counter and retry the procedure. In case the failures persist and the boot counter reaches the bootlimit, U-Boot starts altbootcmd instead of the default bootcmd boot command. The altbootcmd swaps the default boot partition for the other boot partition, which is an identical copy or an older copy, and tries booting from that one instead. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2021-10-19board: ea: mx7ulp_com: move setting CONFIG_BOOTCOMMAND to defconfigRicardo Salveti1-5/+0
Move setting CONFIG_BOOTCOMMAND to the mx7ulp_com_defconfig file. It also allows replacing the default CONFIG_BOOTCOMMAND without code modification. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-10-18treewide: Remove OF_PRIOR_STAGEIlias Apalodimas1-4/+0
The previous patches removed OF_PRIOR_STAGE from the last consumers of the Kconfig option. Cleanup any references to it in documentation, code and configuration options. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-16Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-tegraTom Rini2-11/+30
On merge, fixup order of fdtdec_add_reserved_memory parameters in arch/arm/cpu/armv8/fsl-layerscape/soc.c Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-15Convert CONFIG_USB_EHCI_IS_TDI to KconfigMarek Behún22-53/+0
On mvebu this is defined if and only if !ARM64. Otherwise it is defined for boards with ARCH_MX23, ARCH_TEGRA and ARCH_ZYNQ, and also for SOC_AR934X (tplink_wdr4300). Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-15Drop CONFIG_USB_EHCI_KIRKWOODMarek Behún1-1/+0
This config option doesn't do anything. nas220 uses USB_EHCI_MARVELL. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-15Convert CONFIG_USB_EHCI_MXS to KconfigMarek Behún1-1/+0
This option is only used for mx23evk_defconfig mx23_olinuxino_defconfig which are the only i.MX23 boards. Add depend on ARCH_MX23 and default to y. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-15Rename CONFIG_EHCI_IS_TDI to CONFIG_USB_EHCI_IS_TDIMarek Behún22-22/+22
In preparation for moving this option to Kconfig, rename it to be consistent with other USB EHCI Kconfig options. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-15Remove unused CONFIG_CONS_NONEPatrick Delaunay1-1/+0
Remove the latest reference of CONFIG_CONS_NONE in code Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-15Remove unused CONFIG_SYS_FLASH_AMD_CHECK_DQ7Patrick Delaunay2-2/+0
Remove the latest reference of CONFIG_SYS_FLASH_AMD_CHECK_DQ7 in code Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-15Remove unused CONFIG_NO_RELOCATIONPatrick Delaunay1-1/+0
Remove the latest reference of CONFIG_NO_RELOCATION in code Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-15am33x: Remove unused define CONFIG_MUSB_HOSTPatrick Delaunay1-7/+0
This define was left over from a previous revision, and was never used. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-15scripts: remove some configs in config_whitelist.txtPatrick Delaunay2-2/+1
Remove some config finishing by _ badly added by scripts/build-whitelist.sh when joker is used in comments. for example: doc/uImage.FIT/command_syntax_extensions.txt: ... #ifdef CONFIG_OF_* | ... cmd/nvedit.c:# error Define one of CONFIG_ENV_IS_IN_{EEPROM| \ FLASH|MMC|FAT|EXT4|\ Remove also configs only used in comments: - CONFIG_BOOGER in include/linux/kconfig.h - CONFIG_COMMANDS - CONFIG_INIT_IGNORE_ERROR - CONFIG_REG_* - CONFIG_HOTPLUG : drivers/watchdog/omap_wdt.c:18 Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2021-10-14ARM: tegra: Support EMC frequency tables on Tegra210Thierry Reding1-1/+1
The EMC frequency tables are created from a training sequence performed during early boot and passed in via a reserved memory region by nvtboot. Copy this table to the kernel DTB so that the kernel can use it to scale the EMC frequency at runtime. Note that early bootloaders store the EMC table at an address that currently intersects with the load address of the initial ramdisk. In order to avoid copying the table to a different address, simply change the load address for the initial ramdisk in U-Boot. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-10-14fdtdec: Support reserved-memory flagsThierry Reding1-7/+13
Reserved memory nodes can have additional flags. Support reading and writing these flags to ensure that reserved memory nodes can be properly parsed and emitted. This converts support for the existing "no-map" flag to avoid extending the argument list for fdtdec_add_reserved_memory() to excessive length. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-10-14fdtdec: Reorder fdtdec_set_carveout() parameters for consistencyThierry Reding1-4/+4
The fdtdec_set_carveout() function's parameters are inconsistent with the parameters passed to fdtdec_add_reserved_memory(). Fix up the order to make it more consistent. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-10-14fdtdec: Support compatible string list for reserved memoryThierry Reding1-3/+14
Reserved memory nodes can have a compatible string list to identify the type of reserved memory that they represent. Support specifying an optional compatible string list when creating these nodes. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-10-14fdtdec: Support retrieving the name of a carveoutThierry Reding1-3/+5
When retrieving a given carveout for a device, allow callers to query the name. This helps differentiating between carveouts when there are more than one. This is also useful when copying carveouts to help assign a meaningful name that cannot always be guessed. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2021-10-12Merge tag 'u-boot-stm32-20211012' of ↵Tom Rini11-30/+3
https://source.denx.de/u-boot/custodians/u-boot-stm - Disable ATAGS for STM32 MCU and MPU boards - Disable bi_boot_params for STM32 MCU and MPU boards - Update stm32-usbphyc node management - Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards - Convert some USB config flags to Kconfig for various boards - Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board - Remove specific CONFIG_STV0991 flags - Remove unused CONFIG_USER_LOWLEVEL_INIT flag - Add ofdata_to_platdata() callback for stm32_spi driver - Update for stm32f7_i2c driver - Remove gpio_hog_probe_all() from STM32 MP1 board - Fix bind command Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-12Merge https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini3-17/+110
The bulk of it is Samuel's DM_I2C rework, which removes the nasty I2C deprecation warnings for most 32-bit boards. It also includes some smaller refactorings that pave the way for more changes, mostly driven by needing to support the Allwinner RISC-V SoC later on. Board wise we gain support for the FriendlyARM NanoPi R1S H5 router board and official Pinetab support. Build-tested for all 160 sunxi boards, and boot tested on a A64, A20, H3, H6, and H616 board. USB, SD card, eMMC, and Ethernet all work there (where applicable).
2021-10-12cmd: bind: Fix driver binding on a devicePatrice Chotard1-1/+2
Fix a regression brings by commit 84f8e36f03fa ("cmd: bind: allow to bind driver with driver data") As example, the following bind command doesn't work: bind /soc/usb-otg@49000000 usb_ether As usb_ether driver has no compatible string, it can't be find by lists_bind_fdt(). In bind_by_node_path(), which called lists_bind_fdt(), the driver entry is known, pass it to lists_bind_fdt() to force the driver entry selection. For this, add a new parameter struct *driver to lists_bind_fdt(). Fix also all lists_bind_fdt() callers. Fixes: 84f8e36f03fa ("cmd: bind: allow to bind driver with driver data") Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reported-by: Herbert Poetzl <herbert@13thfloor.at> Cc: Marek Vasut <marex@denx.de> Cc: Herbert Poetzl <herbert@13thfloor.at> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-12sunxi: video: Convert panel I2C to use DM_I2CSamuel Holland1-17/+0
Two displays supported by the sunxi display driver (each one used by a single board) require initialization over I2C. Both previously used i2c_soft; replace this with the i2c-gpio instance that already exists in those boards' device trees (sun5i-a13-utoo-p66 and sun6i-a31-colombus). Since the i2c-gpio nodes are not referenced by any other node in the device trees (the device trees have no panel node), the I2C bus is selected by its node name. This panel initialization code was the only i2c_soft user, so the i2c_soft GPIO setup code can be removed now as well. Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-12i2c: Add a DM_I2C driver for the sun8i RSB controllerSamuel Holland1-0/+6
This bus controller is used to communicate with an X-Powers AXP PMIC. Currently, various drivers access PMIC registers through a platform- specific non-DM "pmic_bus" interface, which depends on the legacy I2C framework. In order to convert those drivers to use DM_PMIC, this bus needs a DM_I2C driver. Refactor the rsb functions to take the base address as a parameter, and implement both the existing interface (which is still needed in SPL) and the DM_I2C interface on top of them. The register for switching between I2C/P2WI/RSB mode is the same across all PMIC variants, so move that to the common header. There are only a couple of pairs of hardware/runtime addresses used across all PMIC variants. So far the code expected only the "primary" pair, but some PMICs like the AXP305 and AXP805 use the secondary pair, so add support for that to the DM driver as well. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-12i2c: Add a DM_I2C driver for the sun6i P2WI controllerSamuel Holland1-0/+6
This bus controller is used to communicate with an X-Powers AXP PMIC. Currently, various drivers access PMIC registers through a platform- specific non-DM "pmic_bus" interface, which depends on the legacy I2C framework. In order to convert those drivers to use DM_PMIC, this bus needs a DM_I2C driver. Refactor the p2wi functions to take the base address as a parameter, and implement both the existing interface (which is still needed in SPL) and the DM_I2C interface on top of them. The register for switching between I2C/P2WI/RSB mode is the same across all PMIC variants. Move that to the common header, so it can be used by both interface implementations. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-11board: siemens: iot2050: Adjust to changes in DT and configurationJan Kiszka1-2/+0
Account for the changes done between merge proposal and the final merge. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-10-11clk: sunxi: Move header out of arch directorySamuel Holland1-0/+98
The CCU header is only used by the DM drivers, not any platform code. Its current location adds an artificial dependency on CONFIG_ARM and ARCH_SUNXI, which will be problematic when adding the CCU driver for a RISC-V sunxi platform. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-10Merge tag 'video-20211009' of ↵Tom Rini13-21/+16
https://source.denx.de/u-boot/custodians/u-boot-video - add 30bpp support (EFI, simplefb, vidconsole) - fix video console name in CONSOLE_MUX Kconfig help - move mxsfb driver config option to Kconfig - remove unused mx3fb driver # gpg verification failed.
2021-10-09video: move MXS to KconfigAnatolij Gustschin12-21/+7
Move CONFIG_VIDEO_MXS from board headers to Kconfig and drop it from obsolete cfb_console driver. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-10-09lz4: Use a private header for U-BootSimon Glass1-0/+0
At present U-Boot has a header file called lz4.h for its own use. If the host has its own lz4 header file installed (e.g. from the 'liblz4-dev' package) then host builds will use that instead. Move the U-Boot file into its own directory, as is done with various other headers with the same problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-09video: Add 30bpp supportMark Kettenis1-0/+9
Add support for 30bpp mode where pixels are picked in 32-bit integers but use 10 bits instead of 8 bits for each component. Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2021-10-08image: Drop most #ifdefs in image-board.cSimon Glass1-2/+5
Remove ifdefs in this file, so far as possible without too much refactoring. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08image: Drop unnecessary #ifdefs from image.hSimon Glass2-37/+7
This file has a lot of conditional code and much of it is unnecessary. Clean this up to reduce the number of build combinations. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08image: Tidy up fit_unsupported_reset()Simon Glass1-13/+0
This function is only used in one place and does not need to use the preprocessor. Move it to the C file and convert it to a normal function. Drop fit_unsupported() since it is not used. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08image: Drop IMAGE_ENABLE_IGNORESimon Glass1-3/+0
We can use the new host_build() function for this, so drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08image: Drop IMAGE_OF_SYSTEM_SETUPSimon Glass1-6/+0
This is not needed with Kconfig, since we can use IS_ENABLED() easily enough. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08image: Drop IMAGE_OF_BOARD_SETUPSimon Glass1-6/+0
This is not needed with Kconfig, since we can use IS_ENABLED() easily enough. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08image: Drop IMAGE_BOOT_GET_CMDLINESimon Glass1-6/+0
This is not needed with Kconfig, since we can use IS_ENABLED() easily enough and the board code is now in a separate file. Update the only place where this is used and drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08image: Use Kconfig to enable FIT_RSASSA_PSS on hostSimon Glass2-5/+0
Add a host Kconfig for FIT_RSASSA_PSS. With this we can use CONFIG_IS_ENABLED(FIT_RSASSA_PSS) directly in the host build, so drop the forcing of this in the image.h header. Drop the #ifdef around padding_pss_verify() too since it is not needed. Use the compiler to check the config where possible, instead of the preprocessor. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08image: Use Kconfig to enable CONFIG_FIT_VERBOSE on hostSimon Glass1-3/+2
Add a host Kconfig for FIT_VERBOSE. With this we can use CONFIG_IS_ENABLED(FIT_VERBOSE) directly in the tools build, so drop the forcing of this in the image.h header. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08image: Drop IMAGE_ENABLE_OF_LIBFDTSimon Glass1-3/+0
Add a host Kconfig for OF_LIBFDT. With this we can use CONFIG_IS_ENABLED(OF_LIBFDT) directly in the tools build, so drop the unnecessary indirection. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08image: Drop IMAGE_ENABLE_FITSimon Glass1-9/+8
Make use of the host Kconfig for FIT. With this we can use CONFIG_IS_ENABLED(FIT) directly in the host build, so drop the unnecessary indirection. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08hash: Use Kconfig to enable hashing in host tools and SPLSimon Glass3-7/+6
At present when building host tools, we force CONFIG_SHAxxx to be enabled regardless of the board Kconfig setting. This is done in the image.h header file. For SPL we currently just assume the algorithm is desired if U-Boot proper enables it. Clean this up by adding new Kconfig options to enable hashing on the host, relying on CONFIG_IS_ENABLED() to deal with the different builds. Add new SPL Kconfigs for hardware-accelerated hashing, to maintain the current settings. This allows us to drop the image.h code and the I_WANT_MD5 hack. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08kconfig: Add tools support to CONFIG_IS_ENABLED()Simon Glass1-3/+10
At present we must separately test for the host build for many options, since we force them to be enabled. For example, CONFIG_FIT is always enabled in the host tools, even if CONFIG_FIT is not enabled by the board itself. It would be more convenient if we could use, for example, CONFIG_IS_ENABLED(FIT) and get CONFIG_HOST_FIT, when building for the host. Add support for this. With this and the tools_build() function, we should be able to remove all the #ifdefs currently needed in code that is build by tools and targets. This will be even nicer when we move to using CONFIG(xxx) everywhere, since all the #ifdef and IS_ENABLED/CONFIG_IS_ENABLED stuff will go away. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> # b4f73886 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08compiler: Rename host_build() to tools_build()Simon Glass1-2/+3
With the new TOOLS_LIBCRYPTO and some other changes, it seems that we are heading towards calling this a tools build rather than a host build, although of course it does happen on the host. I cannot think of anything built by the host which cannot be described as a tool, so rename this function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-10-08image: Avoid #ifdefs for manual relocationSimon Glass1-0/+6
Add a macro to handle manually relocating a pointer. Update the iamge code to use this to avoid needing #ifdefs. This also fixes a bug where the 'done' flag was not set. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08image: Create a function to do manual relocationSimon Glass1-1/+23
Rather than adding an #ifdef and open-coding this calculation, add a helper function to handle it. Use this in the image code. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08gzip: Avoid use of u64Simon Glass2-4/+7
The gzip API uses the u64 type in it, which is not available in the host build. This makes it impossible to include the header file. We could make this type available, but it seems unnecessary. Limiting the compression size to that of the 'unsigned long' type seems good enough. On 32-bit machines the limit then becomes 4GB, which likely exceeds available RAM anyway, therefore it should be sufficient. On 64-bit machines this is effectively u64 anyway. Update the header file and implementation to use 'ulong' instead of 'u64'. Add a definition of u32 for the cases that seem to need exactly that length. This should be safe enough. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08zstd: Create a function for use from U-BootSimon Glass1-0/+11
The existing zstd API requires the same sequence of calls to perform its task. Create a helper for U-Boot, to avoid code duplication, as is done with other compression algorithms. Make use of of this from the image code. Note that the zstd code lacks a test in test/compression.c and this should be added by the maintainer. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-10-08compiler: Add a comment to host_build()Simon Glass1-0/+5
This function should have a comment explaining what it does. Add one. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 01:24:48 +0300