summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)AuthorFilesLines
2018-04-27Convert CONFIG_SPI to KconfigAdam Ford29-63/+0
This converts the following to Kconfig: CONFIG_SPI This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SPI driver. For now, just update the CONFIG tests. This also involves reworking the default for CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a reasonable default, as it does not cause any compile failures. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27Merge git://git.denx.de/u-boot-shTom Rini3-138/+62
2018-04-26ARM: rmobile: Update E2 AltMarek Vasut1-49/+22
The E2 Alt port was broken since some time. This patch updates the E2 Alt port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-26ARM: rmobile: Update M2-N GoseMarek Vasut1-43/+21
The M2-N Gose port was broken since some time. This patch updates the M2-N Gose port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-26ARM: rmobile: Update H2 LagerMarek Vasut1-46/+19
The H2 Lager port was broken since some time. This patch updates the H2 Lager port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-25rockchip: enable SYS_NS16550 for all SoCs by defaultKever Yang5-11/+0
All rockchip SoCs can use ns16550 driver, enable it for all and set SYS_NS16550_MEM32 for all SoCs. Version-changes: 2 - use imply instead of select Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25Revert "rockchip: firefly: Add "usb start" to auto-start USB device"Kever Yang1-2/+1
This reverts commit a1903c18db13e740e6bedb8955b3272dce5104e1. It's really bad idea to add "usb start" in preboot, it will spend a lot of time to scan usb bus, and most of people do not need this feature. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rk322x: update TPL_TEXT_BASEKever Yang1-1/+1
The boot0 hook including the 4-byte TAG which is at the beginning of the TEXT_BASE, now we can use a aligned TEXT BASE. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rk3188: use DM timer instead of rk_timerKever Yang1-5/+0
Disable rk_timer as SYS timer and use DM timer instead, so that we can get a better timer framework, the rk_timer is going to be clean after we conver to use DM timer or ARM arch/generic timer. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25rockchip: rk3288: provide ${fdtfile}Heinrich Schuchardt1-0/+1
All rk3288 default configs define CONFIG_DEFAULT_DEVICE_TREE. So we can use it to define ${fdtfile} in rk3288_common.h. This variable is needed by the distro boot command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-04-25Merge git://git.denx.de/u-boot-videoTom Rini1-0/+0
2018-04-23Merge git://git.denx.de/u-boot-uniphierTom Rini1-2/+3
2018-04-23ARM: uniphier: move SPL stack addressMasahiro Yamada1-1/+1
Currently, the address region, 0xf8000 - 0x100000, is used for SPL stack for the 32bit SoCs. Because the U-Boot proper image starts from 0x70000, the maximum size of the U-Boot proper image is 544KB (0x70000 - 0xf8000) for the NOR boot mode. Now uniphier_v7_defconfig is almost hitting this size limit. Changing CONFIG_SPL_STACK can raise the size limit with less impact. With this, the size limit will increase to 576KB (0x70000 - 0x100000). If we need to increase it even more, we would be able to change CONFIG_SYS_UBOOT_BASE at the cost of the flashing command changes. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-23ARM: uniphier: select a correct mmc device before flashing imagesMasahiro Yamada1-0/+1
Some boards support an SD card and an eMMC device at the same time. Since both belong to 'mmc', they are identified by a device number. When the device number of the eMMC is 1 instead 0, "mmc dev" command must be performed to switch the target device before flashing images. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-23ARM: uniphier: increase CONFIG_SYS_MONITOR_LENMasahiro Yamada1-1/+1
With the recent changes, the size of the U-Boot proper image for uniphier_v7_defconfig exceeded the current limit, 512KB, then SPL fails to load the whole of the U-Boot proper. Increase the size. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-23arm: zynq: Make ENV_SIZE and ENV_OFFSET optional via board fileMichal Simek1-2/+6
Boards have an option to rewrite variable locations in their own board files. This is necessary for qspi and nand configurations where boot image can be bigger then 896k(current limit). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-21ARM: rmobile: Update E2 SilkMarek Vasut1-46/+19
The E2 Silk port was broken since some time. This patch updates the E2 Silk port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- NOTE: The port is missing support for I2C1 for DA9063 reset, since the I2C driver needs to be converted to DM and DT probing. That's not an issue for this patch though, since the reset was broken on Silk since forever.
2018-04-21mmc: sh_mmcif: Migrate configs to CONFIG_SH_MMCIFMarek Vasut6-6/+0
Migrate the U-Boot configs to Kconfig CONFIG_SH_MMCIF . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Jaehoon Chung <jh80.chung@samsung.com>
2018-04-18Merge git://git.denx.de/u-boot-shTom Rini2-40/+24
2018-04-17ARM: rmobile: Update M2 KoelschMarek Vasut1-40/+18
The M2 Koelsch port was broken since some time. This patch updates the M2 Koelsch port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-17configs: socfpga: convert i2c to dmDinh Nguyen1-0/+2
Enable DM I2C driver on SoCFPGA platforms. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-17ARM: rmobile: Enable RPC QSPI on R8A77970 V3M EagleMarek Vasut1-0/+6
Enable the RPC QSPI driver on R8A77970 V3M Eagle and configure the environment layout to match that used by old U-Boot. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-15Merge git://git.denx.de/u-boot-imxTom Rini15-332/+152
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-15Merge git://git.denx.de/u-boot-netTom Rini4-3/+4
2018-04-15mx31ads: DeleteTom Rini1-145/+0
This platform has been marked as orphaned since September 2013, remove. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-15imx31_phycore: DeleteTom Rini1-156/+0
This platform has been marked as orphaned since September 2013, remove. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-15pico-imx7d: Replace fatload commandVanessa Maegima1-2/+2
Replace fatload with the fs generic loading interface ('load' command). Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-15imx: board: Add support for the K+P's kp_imx6q_tpc boardLukasz Majewski1-0/+141
This commit provides support for Kieback & Peter GmbH IMX6Q based TPC board. U-boot console output: U-Boot SPL 2018.05-rc1-00005-g631e2d01fd (Apr 04 2018 - 21:16:24 +0200) Trying to boot from MMC1 U-Boot 2018.05-rc1-00005-g631e2d01fd (Apr 04 2018 - 21:16:24 +0200) CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 37C Reset cause: POR Board: K+P KP_IMX6Q_TPC i.MX6Q Watchdog enabled I2C: ready DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: FEC [PRIME] Autoboot in 3 seconds
2018-04-15board: ge: bx50v3: enable backlight on demandIan Ray1-0/+1
Enable display backlight only if a message needs to be displayed. The kernel re-initializes the backlight, which results in some unwanted artifacts. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-04-15warp7: Set u-boot serial# based on OTP valueBryan O'Donoghue1-0/+3
u-boot has a standard "serial#" environment variable that is suitable for storing the iSerial number we will supply via the USB device descriptor. serial# is automatically picked up by the disk subsystem in u-boot - thus providing a handy unique identifier in /dev/disk/by-id as detailed below. Storing the hardware serial identifier in serial# means we can change the serial# if we want before USB enumeration - thus making iSerial automatic via OTP but overridable if necessary. This patch reads the defined OTP fuse and sets environment variable "serial#" to the value read. With this patch in place the USB mass storage device will appear in /dev/disk/by-id with a unique name based on the OTP value. For example /dev/disk/by-id/usb-Linux_UMS_disk_0_WaRP7-0xf42400d3000001d4-0:0 Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Rui Miguel Silva <rui.silva@linaro.org> Cc: Ryan Harkin <ryan.harkin@linaro.org> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-14ARM: rmobile: Convert TPL to SPLMarek Vasut2-10/+6
There is currently no use for building the SPL anymore, since the SPI loader can easily be replaced by TPL and TPL does load U-Boot directly. Upgrade TPL to SPL and replace what used to be SPL with it. This way we build the U-Boot sources only twice, not thrice. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-14ARM: rmobile: Update H2 StoutMarek Vasut1-37/+18
The H2 Stout port was broken since some time. This patch updates the H2 Stout port to use modern frameworks, DM, DT probing, SPL and TPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-14configs: Fixup some CPSW-related itemsTom Rini2-20/+0
- For am335x_pdu001 we do not want the CPSW driver, drop it - Re-sync the defconfig for am43xx_evm_rtconly as it came in after the patch that converted CPSW to Kconfig was posted but before it was applied. - Drop empty section / comments from pengwyn - Drop empty section / comments from baltos and drop unused CONFIG_SPL_NET_VCI_STRING (it does not enable CONFIG_SPL_NET_SUPPORT currently and SPL_NET_VCI_STRING has been migrated already). Cc: Felix Brack <fb@ltec.ch> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Lothar Felten <lothar.felten@gmail.com> Fixes: f02b8d17619f ("Migrate CONFIG_DRIVER_TI_CPSW to Kconfig") Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Felix Brack <fb@ltec.ch> Tested-by: Felix Brack <fb@ltec.ch>
2018-04-13xilinx: Only enable dist boot pxe when DHCP is enabledJoe Hershberger3-3/+3
Otherwise, we see this: In file included from include/configs/zynq-common.h:183:0, from include/config.h:5, from include/common.h:21, from env/common.c:11: include/config_distro_bootcmd.h:319:2: error: expected ?}? before ?BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE? BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE ^ include/config_distro_bootcmd.h:319:2: note: in definition of macro ?BOOTENV_DEV_NAME_PXE? Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-13net: fec: sharing MDIO for two enet controllersPeng Fan1-0/+1
On i.MX6SX, 6UL and 7D, there are two enet controllers each has a MDIO port. But Some boards share one MDIO port for the two enets. So introduce a configuration CONFIG_FEC_MXC_MDIO_BASE to indicate the MDIO port for sharing. In Kconfig, user needs enable CONFIG_FEC_MXC_SHARE_MDIO first to enter the CONFIG_FEC_MXC_MDIO_BASE. To i.MX28, adapt to use the new config Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-12ARM: rmobile: Set maximum kernel size to 64 MiB on Gen3Marek Vasut1-0/+1
The Gen3 kernel images are often above 8 MiB, increase the maximum kernel size to 64 MiB to future-proof it, just like many other ARM64 boards do. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-12ARM: rmobile: Add TPL support on R8A7791 M2 PorterMarek Vasut1-0/+6
Add and enable TPL on M2 Porter. The TPL must fit into 16 kiB due to the Gen2 BootROM restriction. The TPL is running from MERAM and is capable of performing the initial initialization of PFC, Clock, GPIO, LBSC, DBSC and QSPI NOR. DBSC is responsible for bringing up the DDR DRAM access. The TPL is capable of loading the next stage, U-Boot, from either SPI NOR or UART as a fallback. If either does provide a valid U-Boot uImage, the system stops, which allows the operator to load U-Boot ie. via JTAG and start it manually. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-11spl: spi: Move CONFIG_SPL_SPI_LOAD to KconfigMarek Vasut46-53/+0
Add Kconfig entry for CONFIG_SPL_SPI_LOAD symbol and move all configurations using it to Kconfig. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2018-04-09Merge tag 'xilinx-for-v2018.05-rc2' of git://git.denx.de/u-boot-microblazeTom Rini6-2/+203
Xilinx changes for v2018.05-rc2 - Various DT changes and sync with mainline kernel - Various defconfig updates - Add SPL init for zcu102 revA - Add new zynqmp boards zcu100/zcu104/zcu106/zcu111/zc12XX and zc1751-dc3 - Net fixes - xlnx,phy-type - 64bit axi ethernet support - arasan: Fix nand write issue - fpga fixes - Maintainer file updates
2018-04-09treewide: fix up files incorrectly marked executableFabio Estevam1-0/+0
Inspired by the following kernel commit: "commit 90fda63fa1156ec1bcfd7f9ca384cec221f70a21 Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Sat Apr 7 13:31:23 2018 -0700 treewide: fix up files incorrectly marked executable Joe Perches noted that we have a few source files that for some inexplicable reason (read: I'm too lazy to even go look at the history) are marked executable: drivers/gpu/drm/amd/amdgpu/vce_v4_0.c drivers/net/ethernet/cadence/macb_ptp.c A simple git command line to show executable C/asm/header files is this: git ls-files -s '*.[chsS]' | grep '^100755' and then you can fix them up with scripting by just feeding that output into: | cut -f2 | xargs chmod -x and commit it. Which is exactly what this commit does. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>" Do the same in the U-Boot source tree. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-09arm64: zynqmp: Add support for Xilinx zcu111-revAMichal Simek1-0/+50
Xilinx zcu111 is a customer board. It is reusing some parts from zcu102. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Add support for Xilinx zcu106-revAMichal Simek1-0/+47
Xilinx zcu106 is a customer board. It is reusing some parts from zcu102. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Add support for zcu104 customer boardMichal Simek1-0/+36
Xilinx zcu104 is another customer board. It is sort of zcu102 clone with some differences. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Add support for zc1751 dc3Michal Simek1-0/+20
zc1751 is based board with dc3 extenstion card which is used for silicon validation. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Add support for zcu100 aka Ultra96 boardMichal Simek1-0/+36
Add support for Xilinx zcu100. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Enable pxe and dhcp if commands are enabledMichal Simek1-2/+14
Targets without net can't use pxe or dhcp boot methods. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09Cleanup CONFIG_VERSION_VARIABLE migrationAlex Kiernan2-6/+0
CONFIG_VERSION_VARIABLE had already been mostly migrated to Kconfig, but two headers still referenced it. Also set defaults so that most of the defconfigs inherit the default rather than needing it to be set explicitly. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
2018-04-09Migrate CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to KconfigAlex Kiernan45-65/+0
Convert CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Petr Vorel <petr.vorel at gmail.com>
2018-04-09ti: am335x: Fix bootargs when building without NETAlex Kiernan1-2/+14
If DHCP/PXE commands are disabled then the compilation fails due to bootargs attempting to use them: include/config_distro_bootcmd.h:319:2: error: expected ‘}’ before ‘BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE’ Ensure that if the command aren't enabled, we don't try and use them. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-09Migrate CONFIG_DRIVER_TI_CPSW to KconfigAlex Kiernan10-10/+0
This converts CONFIG_DRIVER_TI_CPSW to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-04 06:59:13 +0300