summaryrefslogtreecommitdiff
path: root/configs
AgeCommit message (Collapse)AuthorFilesLines
2017-07-26Convert CONFIG_ENV_IS_IN_DATAFLASH to KconfigSimon Glass15-0/+15
This converts the following to Kconfig: CONFIG_ENV_IS_IN_DATAFLASH Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-26Convert CONFIG_ENV_IS_IN_EEPROM to KconfigSimon Glass7-0/+7
This converts the following to Kconfig: CONFIG_ENV_IS_IN_EEPROM Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-26Convert CONFIG_ENV_IS_IN_NVRAM to KconfigSimon Glass1-1/+2
This converts the following to Kconfig: CONFIG_ENV_IS_IN_NVRAM Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-26Convert CONFIG_ENV_IS_IN_FLASH to KconfigSimon Glass179-2/+180
This converts the following to Kconfig: CONFIG_ENV_IS_IN_FLASH Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-26Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to KconfigSimon Glass431-23/+452
This converts the following to Kconfig: CONFIG_ENV_IS_IN_MMC CONFIG_ENV_IS_IN_NAND CONFIG_ENV_IS_IN_UBI CONFIG_ENV_IS_NOWHERE In fact this already exists for sunxi as a 'choice' config. However not all the choices are available in Kconfig yet so we cannot use that. It would lead to more than one option being set. In addition, one purpose of this series is to allow the environment to be stored in more than one place. So the existing choice is converted to a normal config allowing each option to be set independently. There are not many opportunities for Kconfig updates to reduce the size of this patch. This was tested with ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC And then manual updates. This is because for CHAIN_OF_TRUST boards they can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic now. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-25configs: Resync with savedefconfigTom Rini21-138/+86
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-25configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFSTom Rini145-8/+151
The above CONFIG options are in Kconfig, and now have correct depends and inter-dependencies. Migrate these to configs/ from include/configs/. In the case of CMD_UBIFS also change it to be a default y if CMD_UBI. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-23board: ti: am43xx: Add FDT fixup for HS devicesAndrew F. Davis1-0/+1
Disable RNG and add TEE to FDT used on HS devices. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-07-23board: ti: am43xx: Add TEE loading and firewall setupAndrew F. Davis1-0/+3
Add support for loading a TEE and setting up firewalled regions to AM43xx HS boards. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-07-18Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini39-124/+59
2017-07-14mx6cuboxi: Move CONFIG_CMD_SATA to KconfigFabio Estevam1-0/+1
Move CONFIG_CMD_SATA option to Kconfig to fix the following build error: In file included from include/configs/mx6cuboxi.h:137:0, from include/config.h:7, from include/common.h:21, from common/env_common.c:11: include/config_distro_bootcmd.h:161:2: error: expected '}' before 'BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_SATA' BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_SATA Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-07-12Merge git://www.denx.de/git/u-boot-marvellTom Rini4-142/+62
2017-07-12imx: cx9020: try pxe boot, if no vmlinuz on mmcPatrick Bruenn1-0/+1
If no vmlinuz is found on mmc, try to boot from pxe. Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
2017-07-12warp: Use PARTUUID to specify the rootfs locationFabio Estevam1-0/+1
warp can run different kernel versions, such as NXP 4.1 or mainline. Currently the rootfs location is passed via mmcblk number and the problem with this approach is that the mmcblk number for the eMMC changes depending on the kernel version. In order to avoid such issue, use UUID method to specify the rootfs location. Succesfully tested booting a NXP 4.1 and also a mainline 4.12 kernel. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2017-07-12mx6sabre: Use PARTUUID to specify the rootfs locationFabio Estevam2-0/+2
mx6sabre boards can run different kernel versions, such as NXP 4.1 or mainline. Currently the rootfs location is passed via mmcblk number and the problem with this approach is that the mmcblk number for the eMMC changes depending on the kernel version. In order to avoid such issue, use UUID method to specify the rootfs location. Succesfully tested booting a NXP 4.1 and also a mainline kernel on a mx6qsabresd and mx6dlsabreauto. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-07-12mx6sabreauto: Do not enable WEIM by defaultFabio Estevam1-1/+1
WEIM cannot be used when I2C3 is enabled due to pin conflict, so keep WEIM disabled by default. I2C3 controls GPIO I2C expander (USB host and OTG have VBUS controlled by the GPIO I2C expander), magnetometer, accelerometer. Not disabling WEIM in U-Boot causes I2C3 to behave badly when booting a NXP 4.1 kernel, which leads to probe failure on several devices, including the lack of USB: imx_usb 2184000.usb: Can't register ci_hdrc platform device, err=-517 By keeping WEIM disabled in U-Boot these kernel issues are gone. Reported-by: Takashi Matsuzawa <tmatsuzawa@xevo.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-07-12imx: reorganize IMX code as other SOCsStefano Babic34-34/+34
Change is consistent with other SOCs and it is in preparation for adding SOMs. SOC's related files are moved from cpu/ to mach-imx/<SOC>. This change is also coherent with the structure in kernel. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@nxp.com> CC: Akshay Bhat <akshaybhat@timesys.com> CC: Ken Lin <Ken.Lin@advantech.com.tw> CC: Marek Vasut <marek.vasut@gmail.com> CC: Heiko Schocher <hs@denx.de> CC: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com> CC: Christian Gmeiner <christian.gmeiner@gmail.com> CC: Stefan Roese <sr@denx.de> CC: Patrick Bruenn <p.bruenn@beckhoff.com> CC: Troy Kisky <troy.kisky@boundarydevices.com> CC: Nikita Kiryanov <nikita@compulab.co.il> CC: Otavio Salvador <otavio@ossystems.com.br> CC: "Eric Bénard" <eric@eukrea.com> CC: Jagan Teki <jagan@amarulasolutions.com> CC: Ye Li <ye.li@nxp.com> CC: Peng Fan <peng.fan@nxp.com> CC: Adrian Alonso <adrian.alonso@nxp.com> CC: Alison Wang <b18965@freescale.com> CC: Tim Harvey <tharvey@gateworks.com> CC: Martin Donnelly <martin.donnelly@ge.com> CC: Marcin Niestroj <m.niestroj@grinn-global.com> CC: Lukasz Majewski <lukma@denx.de> CC: Adam Ford <aford173@gmail.com> CC: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr> CC: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Soeren Moch <smoch@web.de> CC: Richard Hu <richard.hu@technexion.com> CC: Wig Cheng <wig.cheng@technexion.com> CC: Vanessa Maegima <vanessa.maegima@nxp.com> CC: Max Krummenacher <max.krummenacher@toradex.com> CC: Stefan Agner <stefan.agner@toradex.com> CC: Markus Niebel <Markus.Niebel@tq-group.com> CC: Breno Lima <breno.lima@nxp.com> CC: Francesco Montefoschi <francesco.montefoschi@udoo.org> CC: Jaehoon Chung <jh80.chung@samsung.com> CC: Scott Wood <oss@buserror.net> CC: Joe Hershberger <joe.hershberger@ni.com> CC: Anatolij Gustschin <agust@denx.de> CC: Simon Glass <sjg@chromium.org> CC: "Andrew F. Davis" <afd@ti.com> CC: "Łukasz Majewski" <l.majewski@samsung.com> CC: Patrice Chotard <patrice.chotard@st.com> CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Hans de Goede <hdegoede@redhat.com> CC: Masahiro Yamada <yamada.masahiro@socionext.com> CC: Stephen Warren <swarren@nvidia.com> CC: Andre Przywara <andre.przywara@arm.com> CC: "Álvaro Fernández Rojas" <noltari@gmail.com> CC: York Sun <york.sun@nxp.com> CC: Xiaoliang Yang <xiaoliang.yang@nxp.com> CC: Chen-Yu Tsai <wens@csie.org> CC: George McCollister <george.mccollister@gmail.com> CC: Sven Ebenfeld <sven.ebenfeld@gmail.com> CC: Filip Brozovic <fbrozovic@gmail.com> CC: Petr Kulhavy <brain@jikos.cz> CC: Eric Nelson <eric@nelint.com> CC: Bai Ping <ping.bai@nxp.com> CC: Anson Huang <Anson.Huang@nxp.com> CC: Sanchayan Maity <maitysanchayan@gmail.com> CC: Lokesh Vutla <lokeshvutla@ti.com> CC: Patrick Delaunay <patrick.delaunay@st.com> CC: Gary Bisson <gary.bisson@boundarydevices.com> CC: Alexander Graf <agraf@suse.de> CC: u-boot@lists.denx.de Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-07-12mx6sabreauto: Update to SPL only modeVanessa Maegima4-132/+1
As mx6sabreauto supports SPL now, all variants can boot using the same defconfig. This patch: - Removes non-SPL targets. - Renames target to mx6sabreauto_defconfig. - Renames folder and board files to mx6sabreauto. - Updates MAINTAINERS, Makefile and Kconfig accordingly. - Removes .cfg files. - Adds a README with instructions to build and flash SPL and u-boot.img. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-07-12mx6qsabreauto: Add SPL supportVanessa Maegima1-0/+53
Add support for mx6q, mx6dl and mx6qp sabreauto boards in SPL. Retrieved the mx6q DCD table from: board/freescale/mx6qsabreauto/imximage.cfg Retrieved the mx6dl DCD table from: board/freescale/mx6qsabreauto/mx6dl.cfg Retrieved the mx6qp DCD table from: board/freescale/mx6qsabreauto/mx6qp.cfg Flashed SPL and u-boot.img to an SD card and could successfully boot it on mx6q, mx6qp and mx6dl sabreauto boards. Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-07-12icorem6_rqs: Rename icorem6_rqs config fileJagan Teki1-0/+0
imx6qdl_icore_mmc_defconfig => imx6qdl_icore_rqs_defconfig Since icorem6_rqs support MMC/eMMC boot, so doesn't need to name it explicitly. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-07-12serial: mxc: Add debug uart supportJagan Teki1-0/+4
Add support for the debug UART to assist with early debugging. Enable it for i.CoreM6 as an example. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-12ot1200: enable CONFIG_IMX_THERMAL for detailed thermal informationChristian Gmeiner2-0/+4
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2017-07-12cm_fx6: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONSFabio Estevam1-1/+1
SPL is already selected via CONFIG_SPL=y, so there is no need to pass it inside CONFIG_SYS_EXTRA_OPTIONS. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-07-12cgtqmx6eval: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONSFabio Estevam1-1/+1
SPL is already selected via CONFIG_SPL=y, so there is no need to pass it inside CONFIG_SYS_EXTRA_OPTIONS. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-07-12mx6slevk_spl: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONSFabio Estevam1-1/+1
SPL is already selected via CONFIG_SPL=y, so there is no need to pass it inside CONFIG_SYS_EXTRA_OPTIONS. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-07-12mx6sabresd: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONSFabio Estevam1-1/+1
SPL is already selected via CONFIG_SPL=y, so there is no need to pass it inside CONFIG_SYS_EXTRA_OPTIONS. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-07-12arm64: mvebu: use single defconfig for Armada8K development boardsIgal Liberman3-142/+0
Currently, Marvell Armada8k development board use 3 different defconfigs: mvebu_db-88f7040-nand_defconfig mvebu_db-88f7040_defconfig mvebu_db-88f8040_defconfig Having 3 different defconfigs makes maintenance difficult. This patch removes the defconfigs mentioned above and introduce a new defconfig which represents the Armada8k family. NOTE: In order not to break automatic tools compilation, a default device-tree is set in the defconfig (armada-8040-db). However, when compiling u-boot, the user MUST explicitly export the DEVICE_TREE for the requested board because using A80x0 device-tree on A70x0 might break the device. For more information, refer to "doc/README.marvell" (intoduced in this patch). Change-Id: I98515b6306498358f3722ecf7ac4c87f236ebbd8 Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2017-07-12marvell: armada385: Add the Turris Omnia boardMarek Behún1-0/+62
The Turris Omnia is a open-source router created by CZ.NIC. The code is based on the Marvell/db-88f6820-gp by Stefan Roese with modifications from Tomas Hlavacek in the CZ.NIC turris-omnia-uboot repository, which can be found at https://gitlab.labs.nic.cz/turris/turris-omnia-uboot By default, the Turris Omnia uses btrfs as the main and only filesystem, and also loads kernel and device tree from this filesystem. Since U-Boot does not yet support btrfs, you should not flash your Turris Omnia board with this unless you know what you are doing. Signed-off-by: Tomas Hlavacek <tomas.hlavacek@nic.cz> Signed-off-by: Marek Behun <marek.behun@nic.cz> create mode 100644 board/CZ.NIC/turris_omnia/Makefile create mode 100644 board/CZ.NIC/turris_omnia/kwbimage.cfg create mode 100644 board/CZ.NIC/turris_omnia/turris_omnia.c create mode 100644 configs/turris_omnia_defconfig create mode 100644 include/configs/turris_omnia.h Signed-off-by: Stefan Roese <sr@denx.de>
2017-07-12configs: am335x_evm: Enable FASTBOOT based on kconfigAlexandru Gagniuc8-0/+32
When CONFIG_CMD_FASTBOOT or CONFIG_USB_FUNCTION_FASTBOOT are defined in am335x_evm.h, a dependency on g_dnl.c is created. This in turn creates a dependency on having USB gadget enabled. As a result we can't create configs with USB gadget disabled. Since these CONFIG_ variables are now part of kconfig, move them to the board defconfigs, and out of am335x_evm.h. This both preserves current defaults, and allows creating configs with USB gadget off. Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-12ARM: ti816x: Fix enabling GPIO0, enable GPIO1 as wellTom Rini1-0/+1
The TI816x has 2 GPIO banks. For bank 0 we had been clearing the enable bit when setting BIT(8). Correct this by setting it to BIT(1) | BIT(8) after we set and wait for BIT(1) (aka PRCM_MOD_EN). Enable GPIO1 as well so that when CMD_GPIO is enabled it won't crash probing the second bank. Enable CMD_GPIO on ti816x_evm. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-12ti816x: Enable ethernet supportTom Rini1-0/+5
The ti816x SoC revision of the ethernet IP block is handled by the "davinci_emac" driver, rather than the "cpsw" driver as done by later members of the family. Enable the relevant plumbing. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-12Merge git://git.denx.de/u-boot-dmTom Rini62-0/+77
2017-07-11Merge branch 'master' of git://git.denx.de/u-boot-rockchipTom Rini26-6/+153
2017-07-11tegra: nyan-big: Enable bootstageSimon Glass1-0/+5
Enable full bootstage support so we can time SPL and U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1
2017-07-11tegra: nyan-big: Enable the debug UARTSimon Glass1-0/+4
Enable this to allow debugging when the serial UART driver is misconfigured. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1
2017-07-11sandbox: Enable more console optionsSimon Glass1-0/+2
Enable the pre-console buffer, displaying the model and post-relocation console announce on sandbox. Also add a model name to the device tree. This allows testing of these features. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-11x86: Move link to use driver model for SCSISimon Glass3-0/+6
As a demonstration of how to use SCSI with driver model, move link over to use this. This patch needs more work, but illustrates the concept. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11Convert CONFIG_CMD_SATA to KconfigSimon Glass18-0/+18
This converts the following to Kconfig: CONFIG_CMD_SATA Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11Convert CONFIG_SCSI to KconfigSimon Glass42-0/+42
This converts the following to Kconfig: CONFIG_SCSI Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-11rockchip: Add basic support for phyCORE-RK3288 SoM based carrier boardWadim Egorov1-0/+70
The phyCORE-RK3288 is a SoM (System on Module) containing a RK3288 SoC. The module can be connected to different carrier boards. It can be also equipped with different RAM, SPI flash and eMMC variants. The Rapid Development Kit option is using the following setup: - 1 GB DDR3 RAM (2 Banks) - 1x 4 KB EEPROM - DP83867 Gigabit Ethernet PHY - 16 MB SPI Flash - 4 GB eMMC Flash Add basic support for the PCM-947 carrier board, a RK3288 based development board made by PHYTEC. This board works in a combination with the phyCORE-RK3288 System on Module. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: dts: rk3328: add fixed regulator node for xhciMeng Dongyang1-2/+18
The driver changes gpio to fixed regulator to control vbus, so add fixed regulator node in DTS for xhci driver. Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11usb: Kconfig: migrate USB_DWC2 to KconfigPhilipp Tomsich20-0/+20
This change migrates the USB_DWC2 configuration item to Kconfig and runs moveconfig to adjust header files and defconfig. Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com> Split off into a separate patch: Ran moveconfig to migrate other boards: Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: rk3036 remove CONFIG_RAM from defconfigKever Yang2-2/+0
rk3036 sdram driver does not use DM, remove CONFIG_RAM first. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: firefly-rk3399: enable dwmmc driver for the boardKever Yang1-1/+1
Enable mmc_dw_rockchip driver, disable CONFIG_SPL_OF_PLATDATA first for some dependence patches still not merged. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-11rockchip: add evb_rk3229 boardKever Yang1-0/+44
evb_rk3229 is a RK3229 based board, with: - 8GB eMMC; - 1GB DDR SDRAM; - 2 USB2.0 HOST port; - 1 MAC port; - 1 HDMI port; - IR; - WiFi; Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11rockchip: rv1108: disable CONFIG_RAM before we have driverKever Yang1-1/+0
The rv1108 do not have DRAM driver now, so disable it first, or else it will get conflict with the sdram common code. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-10ARM64: poplar: hi3798cv200: u-boot support for Poplar 96BoardsJorge Ramirez-Ortiz1-0/+26
This port adds support for: 1) Serial 2) eMMC 3) USB It has been tested with ARM TRUSTED FIRMWARE running u-boot as the BL33 executable [see board's README] eMMC has been tested for reading and booting the loader and linux kernels as well as saving the u-boot environment. USB has been tested with ASIX networking adapter and SanDisk 7.4GB drive. PSCI has been tested via the reset call (PSCI executes from DDR) The firwmare upgrade process has been tested via TFTP and USB FAT filesystem containing the fastboot.bin image in one of the partitions. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
2017-07-10defconfig: k2g_evm_defconfig: Add K2G ICE to OF_LISTCooper Jr., Franklin1-1/+1
Include K2G ICE to OF_LIST so it can be used for runtime board detection. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-10defconfig: keystone2: Enable U-boot runtime DTB detectionCooper Jr., Franklin4-0/+12
Enable various config options to allow U-boot at runtime to select the proper dtb to use from the list of dtb's within the FIT image. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-10configs: Resync defconfigsTom Rini23-49/+34
Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-22 06:29:45 +0300