summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2021-05-02board: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0Jagan Teki4-0/+134
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier board. Genaral features: - Ethernet 10/100 - Wifi/BT - USB Type A/OTG - Audio Out - CAN - LVDS panel connector i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Carrier board for creating complete i.Core MX8M Mini C.TOUCH 2.0 board. Linux dts commit details: commit <a142252061ff> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0") Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-05-02board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter KitJagan Teki5-0/+170
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board. Genaral features: - LCD 7" C.Touch - microSD slot - Ethernet 1Gb - Wifi/BT - 2x LVDS Full HD interfaces - 3x USB 2.0 - 1x USB 3.0 - HDMI Out - Mini PCIe - MIPI CSI - 2x CAN - Audio Out i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Evaluation board for creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit. Linux dts commit details: commit <051c08eea682> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit") Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-05-02arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini SoMJagan Teki1-0/+232
i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. General features: - NXP i.MX8M Mini - Up to 2GB LDDR4 - 8/16GB eMMC - Gigabit Ethernet - USB 2.0 Host/OTG - PCIe Gen2 interface - I2S - MIPI DSI to LVDS - rest of i.MX8M Mini features i.Core MX8M Mini needs to mount on top of Engicam baseboards for creating complete platform solutions. Linux dts commit details: commit <470d6dad5ddd> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini SoM") Add support for it. Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-05-02arm64: dts: imx8mm: Add common -u-boot.dtsiJagan Teki7-209/+51
/soc@0 aips1 aips2 aips3 clk iomuxc osc_24m are common node enablements across imx8mm platform for dm-spi, dm-pre-reloc stages. Move them into common dtsi, imx8mm-u-boot.dtsi Cc: Tim Harvey <tharvey@gateworks.com> Cc: Adam Ford <aford173@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Teresa Remmet <t.remmet@phytec.de> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-05-02board: ge: bx50v3: add phy reset GPIOSebastian Reichel1-0/+12
Add PHY's reset GPIO, so that U-Boot does a PHY hard reset. This is needed, since the PHY might become unresponsive if watchdog reboots the system while a transaction is ongoing. The reset GPIO is added to the U-Boot specific DT files, since the kernel does not setup the reserved registers correctly after resetting the PHY and thus must not reset it. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-04-29Merge tag 'xilinx-for-v2021.07-rc2' of ↵Tom Rini1-3/+0
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.07-rc2 xilinx: - Enable saving variables based on bootmode - Cleanup usb dfu setup and wire it up with usb bootmode - Fix bootscript address logic - Remove GD references (spi, Versal) - Enable capsule update clk: - Small Kconfig fix net: - Fix gmii2rgmii bridge binding usb: - Propagate error (dfu gadget)
2021-04-29phy: marvell: add support for SFI1Igal Liberman7-11/+12
In CP115, comphy4 can be configured into SFI port1 (in addition to SFI0). This patch adds the option described above. In addition, rename all existing SFI/XFI references: COMPHY_TYPE_SFI --> COMPHY_TYPE_SFI0 No functional change for exsiting configuration. Change-Id: If9176222e0080424ba67347fe4d320215b1ba0c0 Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
2021-04-29phy: marvell: fix pll initialization for second utmi portGrzegorz Jaszczyk1-15/+21
According to Design Reference Specification the PHY PLL and Calibration register from PHY0 are shared for multi-port PHY. PLL control registers inside other PHY channels are not used. This commit reworks utmi device tree nodes in a way that common PHY PLL registers are moved to main utmi node. Accordingly both child nodes utmi-unit range is reduced and register offsets in utmi_phy.h are updated to this change. This fixes issues in scenarios when only utmi port1 was in use, which resulted with lack of correct pll initialization. Change-Id: Icc520dfa719f43a09493ab31f671efbe88872097 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: cp110: remove unused definitionsMarcin Wojtas1-1/+1
Even if comphy types of SATA2/SATA3/SGMII3 and comphy speeds of 1.5G/3G/6.25G were referenced in the driver non configuration (dts) was using it. This patch removes unused definitions. Change-Id: I53ed6f9d3a82b9d18cb4e488bc14d3cf687f9488 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
2021-04-29phy: marvell: rename comphy related definitions to COMPHY_XXIgal Liberman12-122/+124
Currently, all comphy definitions are PHY_TYPE_XX and PHY_SPEEED_XX. Those definition might be confused with MDIO PHY definitions. This patch does the following changes: - PHY_TYPE_XX --> COMPHY_TYPE_XX - PHY_SPEED_XX --> COMPHY_SPEED_XX This improves readability, no functional change. Change-Id: I2bd1d9289ebbc5c16fa80f9870f797ea1bcaf5fa Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
2021-04-29arm: octeontx2: cn9130-crb.dtsi: Disable eth2 for nowStefan Roese1-3/+1
Because of the incorrectly supported SGMII_2500 mode, this patch disables eth2 for now until this issue will be fixed in mainline. Also fix an incorrect comment. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Chulski <stefanc@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Marek Behun <marek.behun@nic.cz>
2021-04-29arm: octeontx2: Add Octeon TX2 CN9130 CRB supportKonstantin Porotchkin1-0/+10
This patch adds the base support for the Marvell Octeon TX2 CN9130 CRB. Not all interfaces are supported fully yet. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-29arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN9130 CRBKonstantin Porotchkin5-1/+453
This patch adds the dtsi/dts files needed to support the Marvell Octeon TX2 CN9130 CRB. This is only the base port with not all interfaces supported fully. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-29arm: armada: dts: Add support for ap807-based platformsKonstantin Porotchkin8-379/+330
Add support for SoCs based on AP807 die. Remove unused include file for Armada-8020 SoC. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-29arm: armada: dts: Use a single dtsi for cp110 die descriptionKonstantin Porotchkin13-944/+504
Use a single dtsi file for CP110 die instead of master/slave. Moving to single file will allow miltiple DTSI inclusions with re-defined CP index and name. This change will also allow support for SoCs containing more than two CP110 dies on board. Move pin control definitions from CP110 DTS to board DTS files Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28test: reset: Extend base reset test to catch errorNeil Armstrong1-2/+2
With this extended test, we get the following failure : => ut dm reset_base Test: dm_test_reset_base: reset.c test/dm/reset.c:52, dm_test_reset_base(): reset_method3.id == reset_method3_1.id: Expected 0x14 (20), got 0x2 (2) Test: dm_test_reset_base: reset.c (flat tree) test/dm/reset.c:52, dm_test_reset_base(): reset_method3.id == reset_method3_1.id: Expected 0x14 (20), got 0x2 (2) Failures: 2 A fix is needed in reset_get_by_index_nodev() when introduced in [1]. [1] ea9dc35aab ("reset: Get the RESET by index without device") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-28arm: zimage: Use correct symbol to hide messages in SPLSamuel Holland1-7/+5
When zImage support was added to SPL, the messages were hidden to reduce code size. However, the wrong config symbol was used. Since this file is only built when CONFIG_SPL_FRAMEWORK=y, the messages were always hidden. Use the correct symbol so the messages are printed in U-Boot proper. Also use IS_ENABLED to drop the #ifdef. Fixes: 431889d6ad9a ("spl: zImage support in Falcon mode") Signed-off-by: Samuel Holland <samuel@sholland.org>
2021-04-28powerpc: introduce CONFIG_CACHE_FLUSH_WATCHDOG_THRESHOLDRasmus Villemoes3-2/+23
When flush_cache() is called during boot on our ~7M kernel image, the hundreds of thousands of WATCHDOG_RESET calls end up adding significantly to boottime. Flushing a single cache line doesn't take many microseconds, so doing these calls for every cache line is complete overkill. The generic watchdog_reset() provided by wdt-uclass.c actually contains some rate-limiting logic that should in theory mitigate this, but alas, that rate-limiting must be disabled on powerpc because of its get_timer() implementation - get_timer() works just fine until interrupts are disabled, but it just so happens that the "big" flush_cache() call happens in the part of bootm where interrupts are indeed disabled. [1] [2] [3] I have checked with objdump that the generated code doesn't change when this option is left at its default value of 0: gcc is smart enough to see that the ">=" comparison is tautologically true, hence all assignments to "flushed" are eliminated as dead stores. On our board, setting the option to something like 65536 ends up reducing total boottime by about 0.8 seconds. [1] https://patchwork.ozlabs.org/project/uboot/patch/20200605111657.28773-1-rasmus.villemoes@prevas.dk/ [2] https://lists.denx.de/pipermail/u-boot/2021-April/446906.html [3] https://lists.denx.de/pipermail/u-boot/2021-April/447280.html Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-04-28powerpc: lib: remove leftover CONFIG_5xxRasmus Villemoes1-2/+0
CONFIG_5xx hasn't existed since commit 502589777416 (powerpc, 5xx: remove support for 5xx). Remove this last mention of it. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-04-28allow opting out of WATCHDOG_RESET() from timer interruptRasmus Villemoes2-2/+2
Having WATCHDOG_RESET() called automatically from the timer interrupt runs counter to the idea of a watchdog device - if the board runs into an infinite loops with interrupts still enabled, the watchdog will never fire. When using CONFIG_(SPL_)WDT, the watchdog_reset function is a lot more complicated than just poking a few SOC-specific registers - it involves accessing all kinds of global data, and if the interrupt happens at the wrong time (say, in the middle of an WATCHDOG_RESET() call from ordinary code), that can end up corrupting said global data. Allow the board to opt out of calling WATCHDOG_RESET() from the timer interrupt handler by setting CONFIG_SYS_WATCHDOG_FREQ to 0 - as that setting is currently nonsensical (it would be compile-time divide-by-zero), it cannot affect any existing boards. Add documentation for both the existing and extended meaning of CONFIG_SYS_WATCHDOG_FREQ. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-04-28sunxi: DT: A64: Update devicetree files from Linux 5.12Andre Przywara17-76/+215
Import updated devicetree files from the Linux v5.12 release. Besides some node and audio port renames this changes the PHY modes to either rgmii-id or rgmii-txid. From the board files the Pinephone sees a lot of updates. This also adds the long missing USB PHY property for controller 0, which allows the U-Boot PHY driver to eventually use port 0 in host mode (pending another U-Boot patch). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
2021-04-28sunxi: DT: R40: Update device tree files from Linux 5.12Ivan Uvarov3-44/+366
Update R40 .dts{,i} and dt-binding headers to current version from kernel. Files taken from Linux 5.12-rc1 release (commit fe07bfda2fb9cdef8a4d4008a409bb02f35f1bd8) Signed-off-by: Ivan Uvarov <i.uvarov@cognitivepilot.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-28mips: octeon: ebb7304: Add support for some I2C devicesAaron Williams1-0/+11
This patch adds support for the following I2C devices connected to I2C bus 0 on the Octeon EBB7304: - Dallas DS1337 RTC - TLV EEPROM Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-28mips: octeon: dts/dtsi: Change UART DT node to use clocks propertyAaron Williams2-4/+2
We already have a clock driver for MIPS Octeon. This patch changes the Octeon DT nodes to supply the clock property via the clock driver instead of using an hard-coded value, which is not correct in all cases. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-28mips: octeon: Add Octeon III NIC23 board supportStefan Roese3-0/+170
This patch adds the basic support for the PCIe target board equipped with the Octeon III CN2350 SoC. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: mrvl, cn73xx.dtsi: Add AHCI/SATA DT nodeStefan Roese1-0/+19
Add the AHCI compatible SATA DT node to the Octeon CN73xx dtsi file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-28mips: octeon: cpu.c: Enable AHCI/SATA supportStefan Roese1-1/+20
For easy AHCI/ SATA integration, this patch adds board_ahci_enable() for the MVEBU AHCI driver, which will be used by this platform. This platform specific "enable" function will setup the proper endian swapping in the AHCI controller so that it can be used by the common AHCI code. Additionally the endian swizzle entry for AHCI in octeon_should_swizzle_table[] is removed, as this enabled the original lowlevel code function, e.g. octeon_configure_qlm(), for the QLM setup to work correctly. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-28mips: octeon: cpu.c: Add arch_misc_init() for pci-console & pci-bootcmdStefan Roese1-0/+327
This patch adds the necessary platform infrastructure code, so that the MIPS Octeon drivers "serial_octeon_pcie_console" & "serial_bootcmd" can be used. This is e.g. the bootmem initialization in a compatible way to the Marvell 2013 U-Boot, so that the exisiting PC remote tools like "oct-remote-console" & "oct-remote-load" can be used. This is be done in the newly introduced arch_misc_init(), which calls the necessary init functions when enabled. These patches are in preparation for the MIPS Octeon NIC23 board support, which is a desktop PCIe target board enabling these features. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-28mips: octeon: cvmx-coremask.h: Fix cvmx_coremask_dprint() with DEBUG definedStefan Roese1-2/+3
As DEBUG is no Kconfig symbol, we can't use the IS_ENABLED() macros. This patch switches to the unfortunately necessary #ifdef usage again to make it work correctly. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: cvmx-bootmem: Fix compare in "if" statementStefan Roese1-2/+2
While porting from the Marvell source, I introduced a bug by misplacing the parenthesis. This patch fixes this issue. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: Move CVMX_SYNC from octeon_ddr.h to cvmx-regs.hStefan Roese2-2/+1
This makes is easier to use this macro from non-DDR related files. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: mrvl, cn73xx.dtsi: Add PCIe controller DT nodeStefan Roese1-0/+16
This patch adds the PCIe controller node to the MIPS Octeon 73xx dtsi file. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: Kconfig: Enable CONFIG_SYS_PCI_64BITStefan Roese1-0/+4
Setting CONFIG_SYS_PCI_64BIT is needed for correct PCIe functionality on MIPS Octeon. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: Makefile: Enable building of the newly added C filesStefan Roese1-0/+11
This patch adds the newly added C files to the Makefile to enable compilation. This is done in a separate step, to not introduce build breakage while adding the single files with potentially missing externals. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: Add octeon_qlm.cAaron Williams1-0/+5853
Import octeon_qlm.c from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: Add octeon_fdt.cAaron Williams1-0/+1040
Import octeon_fdt.c from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: Add cvmx-qlm.cAaron Williams1-0/+2350
Import cvmx-qlm.c from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: Add cvmx-pcie.cAaron Williams1-0/+2487
Import cvmx-pcie.c from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: Add cvmx-helper.cAaron Williams1-0/+2611
Import cvmx-helper.c from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: Add cvmx-helper-util.cAaron Williams1-0/+1225
Import cvmx-helper-util.c from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: Add cvmx-helper-jtag.cAaron Williams1-0/+172
Import cvmx-helper-jtag.c from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: Add cvmx-helper-fdt.cAaron Williams1-0/+970
Import cvmx-helper-fdt.c from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: Add cvmx-helper-cfg.cAaron Williams1-0/+1914
Import cvmx-helper-cfg.c from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: Move cvmx-lmcx-defs.h from mach/cvmx to machStefan Roese2-1/+1
To match all other cvmx-* header, this patch moves the already existing cvmx-lmcx-defs.h header one directory up. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: Misc changes required because of the newly added headersStefan Roese7-208/+321
With the newly added headers and their restructuring (which macro is defined where), some changes in the already existing Octeon files are necessary. This patch makes the necessary changes. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: Add misc remaining header filesAaron Williams29-0/+12242
Import misc remaining header files from 2013 U-Boot. These will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-28mips: octeon: Add cvmx-sso-defs.h header fileAaron Williams1-0/+2904
Import cvmx-sso-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: Add cvmx-sriox-defs.h header fileAaron Williams1-0/+44
Import cvmx-sriox-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: Add cvmx-sriomaintx-defs.h header fileAaron Williams1-0/+61
Import cvmx-sriomaintx-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-28mips: octeon: Add cvmx-smix-defs.h header fileAaron Williams1-0/+360
Import cvmx-smix-defs.h header file from 2013 U-Boot. It will be used by the later added drivers to support PCIe and networking on the MIPS Octeon II / III platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-23 16:06:15 +0300