summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2021-07-10arm: dts: sunxi: h5: Update DT filesAndre Przywara13-24/+296
Update the H5 DT files from the Linux 5.12 release. The changes don't affect U-Boot at all, but fix Gigabit Ethernet when this DT is passed on to the Linux kernel. It also introduces DVFS. This also updates the shared sunxi-h3-h5.dtsi, but that only adds nodes that are of no concern to U-Boot. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-07-10arm: dts: sunxi: h6: Update DT filesAndre Przywara6-22/+45
Update the H6 DT files from the Linux 5.12 release. The changes are minimal (many LED node renames), but also help to enable USB port 0 in U-Boot (later), enable the RSB device (not yet used in U-Boot), and also introduce an MMC frequency limit. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-07-09arm: armv8: Fix warning about redeclaring global functions as weakTom Rini1-6/+3
As seen with clang-12: warning: __asm_invalidate_l3_dcache changed binding to STB_WEAK As we indeed use ENTRY and then declare the function weak manually. Use the WEAK declarative from <linux/linkage.h> instead. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-09arm: bootm: Disable LMB reservation for command line and board info on arm64Marek Vasut1-0/+2
On arm64, board info is not applicable and kernel command line patched into the DT, so the LMB reservation here makes no sense anymore. On legacy arm32, this might still be necessary on systems which do not use DT or use legacy ATAGS. Disable this LMB reservation on arm64. This also permits Linux DT to specify reserved memory node at address close to the end of DRAM bank, i.e. overlaping with U-Boot location. Since after boot, U-Boot will be no more, this is OK. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hai Pham <hai.pham.ud@renesas.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Rini <trini@konsulko.com>
2021-07-09arch: cache: cp15: Add mmu_set_region_dcache_behaviour() when SYS_DCACHE_OFF ↵Patrice Chotard1-6/+12
is enable Fix following compilation issue when SYS_DCACHE_OFF is enable: drivers/misc/scmi_agent.c:128: undefined reference to `mmu_set_region_dcache_behaviour' when SYS_DCACHE_OFF is enable, mmu_set_region_dcache_behaviour() must be defined. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-07-09armv8: Handle EL2 Host modeMark Kettenis1-2/+4
On implementations that support VHE, the layout of the CPTR_EL2 register depends on whether HCR_EL2.E2H is set. If the bit is set, CPTR_EL2 uses the same layout as CPACR_EL1 and can in fact be accessed through that register. In that case, jump to the EL1 code to enable access to the FP/SIMD registers. This allows U-Boot to run on systems that pass control to U-Boot in EL2 with EL2 Host mode enabled such as machines using Apple's M1 SoC. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Acked-by: Marc Zyngier <maz@kernel.org>
2021-07-08Revert "arm: Remove nsa310s board"Tom Rini1-0/+4
While this platform has not yet been converted, there is active efforts to do so. Keep the platform for now. This reverts commit aa697e6904ba1b3144a46ec642d4695e7c0cdc3e. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove spear600 boards and the rest of SPEAr supportTom Rini24-2395/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is the last of the SPEAr platforms, so remove the rest of the remaining support as well. Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove spear320 boardsTom Rini6-33/+4
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is also the last SPEAR3XX platform, remove that symbol as well. Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove spear310 boardsTom Rini4-31/+2
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove spear300 boardsTom Rini4-18/+2
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. Cc: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove nsa310s boardTom Rini1-4/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove it Cc: Gerald Kerma <dreagle@doukki.net> Cc: Tony Dinh <mibodhi@gmail.com> Cc: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove gplugd boardTom Rini1-6/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove it Cc: Ajay Bhargav <contact@8051projects.net> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove edb9315a boardTom Rini1-7/+0
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove it. This is also the last PL010_SERIAL using board, so remove those references. Cc: Sergey Kostanbaev <sergey.kostanbaev@fairwaves.ru> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08arm: Remove at91rm9200ek boardsTom Rini2-6/+1
These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. Cc: Andreas Bießmann <andreas@biessmann.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove T4160RDB boardTom Rini9-252/+8
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. As this is the last ARCH_T4160 platform, remove that support as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove MPC832XEMDS boardsTom Rini1-6/+0
These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove MPC8323ERDB boardTom Rini1-5/+0
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove MPC8315ERDB boardTom Rini7-103/+9
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. As this is the last ARCH_MPC8315 platform, remove that support as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove sbc8641d boardTom Rini23-4000/+1
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. This is also the last of the ARCH_MPC8641/MPC8610 platforms, so remove that support as well. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-08ppc: Remove xpedite boardsTom Rini6-122/+4
These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this includes the last ARCH_MPC8572 platform, remove that as well. Cc: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Peter Tyser <ptyser@xes-inc.com>
2021-07-08ppc: Remove MPC8568MDS boardTom Rini5-93/+3
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. As this is the last ARCH_MPC8568 platform, remove that support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove T1023RBD boards and T1024RDB_SECURE_BOOTTom Rini6-44/+6
These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is the only ARCH_T1023 platform left, remove that support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove MPC8555CDS boardsTom Rini7-52/+5
These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is the only ARCH_MPC8555 platform left, remove that support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove MPC8541CDS boardTom Rini7-26/+8
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. As this is the only MPC8541 target left, remove that architecture support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove TQM834x boardTom Rini1-6/+0
This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove sbc8548 boardsTom Rini1-5/+0
These boards have not been converted to CONFIG_DM_PCI by the deadline and are also missing conversion to CONFIG_DM. Remove them. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove caddy2 / vme8349 boardsTom Rini1-9/+0
These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove MPC8313ERDB boardsTom Rini1-13/+0
These boards have not been converted to CONFIG_DM_PCI by the deadline. Remove them. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove ve8313 boardTom Rini1-5/+0
This board has not been converted to CONFIG_DM_PCI by the deadline. Remove it. Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Heiko Schocher <hs@denx.de>
2021-07-08ppc: Remove mpc8308_p1m boardTom Rini1-5/+0
This board has not been converted to CONFIG_DM_PCI by the deadline. Remove it. Cc: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove many T104x boardsTom Rini2-18/+0
These boards have not been converted to CONFIG_DM_PCI, CONFIG_DM_USB or in some cases CONFIG_DM itself by the deadline. Remove them. Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08ppc: Remove sbc8349 boardTom Rini1-5/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08m68k: Remove M5475x boardsTom Rini25-1765/+2
These board has not been converted to CONFIG_DM_PCI by the deadline. Remove them. As this is the last of the mcf547x_8x family of boards, remove that support as well. Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-08m68k: Remove M5485 boardsTom Rini12-265/+1
These board has not been converted to CONFIG_DM_PCI by the deadline. Remove them. As this is all of the CONFIG_M548x platforms as well, remove that code. Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07Merge tag 'dm-pull-6jul21' of https://source.denx.de/u-boot/custodians/u-boot-dmTom Rini4-10/+40
various minor sandbox improvements
2021-07-07Merge branch '2021-07-06-update-to-gcc11-clang11'Tom Rini2-0/+4
- Update CI to use gcc-11.1 and clang-11 to build everything. This requires a few fixes to the code that these newer compilers have exposed.
2021-07-07Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini1-2/+2
2021-07-07x86: Drop _X86EMU_env definition when CONFIG_BIOSEMU is usedBin Meng1-0/+2
With x86 we can execute an option ROM either natively or using the x86 emulator (if enabled with CONFIG_BIOSEMU). Both of these share the _X86EMU_env variable, with the native code using it to hold register state during interrupt processing. At present, in 32-bit U-Boot, the variable is declared twice, once in common code and once in code only compiled with CONFIG_BIOSEMU. With GCC 11 this causes a 'multiple definitions' error on boards with CONFIG_BIOSEMU. Drop the emulator definition when CONFIG_BIOSEMU is used. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-07-07bootstage: Eliminate when not enabledTom Rini1-0/+2
When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07Merge tag 'u-boot-atmel-fixes-2021.10-a' of ↵Tom Rini7-7/+10
https://source.denx.de/u-boot/custodians/u-boot-atmel First set of u-boot-atmel fixes for 2021.10 cycle: This small fixes set is dedicated to fixing the onewire subsystem for the at91 boards which was broken since 2020.04.
2021-07-07riscv: dts: add OpenPiton RISC-V board dts supportTianrui Wei1-2/+2
Previous device tree for OpenPiton emits a warning during compilation. This commit fixes the previous warning adds dts to the OpenPiton RISC-V board and added the device tree to MAINTAINER file. Signed-off-by: Tianrui Wei <tianrui-wei@outlook.com> Reported-by: Tom Rini <trini@konsulko.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-07Merge branch '2021-07-06-platform-updates'Tom Rini19-31/+1793
- mpc8379erdb DM_USB, DM_PCI and DM_ETH support. - Drop PCI support from the integrator family of boards - Add synquacer support - Assorted lpc32xx updates and improvements - snapdragon (and related) fixes, Broadcom iproc update
2021-07-06arm: dts: db410c: Add missing cd-gpios for SD card detectionStephan Gerhold1-1/+3
It looks like SD card detection is broken at the moment for DB410c. The eMMC is detected correctly, but the SD card is not. This is probably similar to the issue fixed in commit 850514740358 ("mmc: msm_sdhci: Use mmc_of_parse for setting host_caps") for eMMC, except that the SD card does not have a property like "non-removable" that skips the card detection. The SDHCI on DB410c cannot detect itself if a SD card is inserted, so add the necessary cd-gpios to make SD card detection work again. While at it, fix the #gpio-cells for the soc_gpios to avoid DTC warnings - the soc_gpios are actually already used with two cells for the gpio-leds so this was just wrong all the time. Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-07-06arm: snapdragon: Fix typo in clk_bcr_update()Sheep Sun1-5/+5
Fix typo in clock-snapdragon.c Signed-off-by: Sheep Sun <sunxiaoyang2003@gmail.com>
2021-07-06arm: snapdragon: Use correct GICC register on APQ8016Sheep Sun1-1/+1
The GICC register used by u-boot is 0x0a20c000, which is actually a GICC for WCNSS, the WLAN processor. U-boot runs on the Application Processor, therefore it should use APCS GICC instead. Hence, correct it with APCS GICC register address. Signed-off-by: Sheep Sun <sunxiaoyang2003@gmail.com>
2021-07-06arm: lpc32xx: add EA LPC3250 DevKitv2 board supportTrevor Woerner3-0/+21
Add basic support for running U-Boot on the Embedded Artists LPC3250 Developer's Kit v2 board by launching U-Boot from the board's s1l loader (which comes pre-installed on the board). Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-07-06lpc32xx: import device tree from LinuxTrevor Woerner2-0/+781
Import the dtsi, dts, and clock binding files for the lpc32xx ea3250 board directly and unmodified from the latest Linux kernel. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-07-06lpc32xx: Kconfig: switch to CONFIG_CONS_INDEXTrevor Woerner2-4/+3
There's nothing special or unique to the lpc32xx that requires its own config parameter for specifying the console uart index. Therefore instead of using the lpc32xx-specific CONFIG_SYS_LPC32XX_UART include parameter, use the already-available CONFIG_CONS_INDEX from Kconfig. Signed-off-by: Trevor Woerner <twoerner@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-06board: synquacer: Add DeveloperBox 96boards EE supportMasami Hiramatsu1-0/+14
Add the DeveloperBox 96boards EE support. This board is also known as Socionext SynQuacer E-Series. It contians one "SC2A11" SoC, which has 24-cores of arm Cortex-A53, and 4 DDR3 slots, 3 PCIe slots (1 4x port and 2 1x ports which are expanded via PCIe bridge chip), 2 USB 3.0 ports and 2 USB 2.0 ports, 2 SATA ports and 1 GbE, 64MB NOR flash and 8GB eMMC on standard MicroATX Form Factor. For more information, see this page; https://www.96boards.org/product/developerbox/ Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-18 08:35:28 +0300