summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2021-03-01mx23-evk: Import devicetree file from LinuxFabio Estevam3-0/+1114
Import the imx23-evk devicetree files from Linux kernel version 5.11. This is in preparation for converting the mx23evk_defconfig target to driver model. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-03-01mx51evk: Convert to driver modelFabio Estevam1-0/+3
Make the conversion to driver model as it is mandatory. Tested booting the Linux kernel from the SD card. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-03-01imx51-babbage: Import devicetree files from LinuxFabio Estevam3-0/+2148
Import the imx51-babbage devicetree files from Linux kernel version 5.11-rc7. This is in preparation for converting the mx51evk_defconfig target to driver model. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-03-01ARM: dts: imx53-qsb: Describe the esdhc1 card detect pinFabio Estevam1-0/+2
The micro SD card slot uses GPIO3_13 as card detect pin, so describe it in the devicetree. This was noticed when converting imx53-qsb board to driver model in U-Boot as the micro SD card was not getting detected. After this change it is possible to load the dtb and zImage from the SD card and boot Linux. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-03-01mx53loco: Convert to driver modelFabio Estevam1-0/+1
Make the conversion to driver model as it is mandatory. Remove the SATA support for now as the i.MX53 support has not been added yet. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-03-01imx53-qsb: Import devicetree files from LinuxFabio Estevam2-0/+496
Import the imx53-qsb devicetree files from Linux kernel version 5.11-rc7. This is in preparation for converting the mx53loco_defconfig target to driver model. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-03-01board: toradex: move RGMII delays to PHY sideOleksandr Suvorov2-2/+2
The RGMII link delays can be set on either MAC or PHY side. Set the rgmii-id PHY mode for FEC and remove FEC_ENET_ENABLE_.XC_DELAY setting, so that these definitions aren't used anymore throughout the U-Boot. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-03-01ARM: imx8: Add missing FEC ENET quirk for i.MX8/i.MX8XOleksandr Suvorov1-0/+2
Both NXP SoCs i.MX8 and i.MX8X have ENET gigabit MAC. Define FEC_QUIRK_ENET_MAC for the imx8 platform and remove this definition from configs of boards, based on MX8/MX8X. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Acked-by: Marek Vasut <marex@denx.de> Reviewed-By: Ramon Fried <rfried.dev@gmail.com> Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-03-01ARM: mx6: Add function to set serial#Sean Anderson1-0/+37
The serial number OTP is similar to the imx7 version, except that the register names are different. This also sets serial# directly, instead of providing board_get_serial. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-02-26Merge tag 'u-boot-stm32-20210226' of ↵Tom Rini1-80/+0
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Add USB host boot support in stm32mp1 config - Enable uefi related commands for STMicroelectronics STM32MP15 boards - Remove duplicate uart nodes in stm32mp15 device tree
2021-02-26arm: dts: stm32mp15: remove duplicate uart nodesPatrick Delaunay1-80/+0
Remove duplicated uart nodes introduced with commit 62f95af92a3f ("ARM: dts: stm32mp1: DT alignment with Linux kernel v5.9-rc4"), because the uart nodes wasn't correctly ordered in alphabetic order. Only cosmetic: the generated device tree don't change. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-02-26Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini1-4/+1
- turris_mox: Enhancements, mostlly defconfig changes (Pali) - pci-aardvark: Set Max Payload Size and Max Read Request Size to 512 bytes (Pali) - pci_mvebu: Minor cleanup and refactoring (Marek) - Upgrade A38x DDR3 training to version 14.0.0 (Marek)
2021-02-26Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini1-0/+2
2021-02-26ARM: dts: armada-385-turris-omnia: rename node in -u-boot.dtsi fileMarek Behún1-4/+1
The SPI NOR flash node name in main device tree for Turris Omnia is called `spi-nor@0`. Rename node spi-flash@0 in Turris Omnia's -u-boot.dtsi file to spi-nor@0 so that U-Boot does not try to probe the same SPI NOR device multiple times. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Pali Rohár <pali@kernel.org>
2021-02-25ppc: Remove MPC8569MDS boardTom Rini7-141/+3
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. As this is the last ARCH_MPC8569 board, remove that support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25arm: Remove sksimx6 boardTom Rini1-6/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefano Babic <sbabic@denx.de>
2021-02-25arm: Remove mx53smd boardTom Rini1-5/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-02-25arm: Remove mx53ard boardTom Rini1-5/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-02-25arm: Remove mx25pdk boardTom Rini1-7/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-02-25riscv: k210: Enable QSPI for spi3Sean Anderson1-0/+2
This device has four IOs connected to the SPI flash. Add the appropriate bindings. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Liang <ycliang@andestech.com>
2021-02-25common: Add "ifndef __ASSEMBLY__" in asm/global_data.hSiew Chin Lim1-0/+4
Commit "common: Drop asm/global_data.h from common header" added asm/global_data.h into secure.h. However, secure.h will be included by psci.S. Adding asm/global_data.h has caused compilation failure in pcsi.S. Add "ifndef __ASSEMBLY__" in asm/global_data.h. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-23Merge tag 'xilinx-for-v2021.04-rc3' of ↵Tom Rini1-2/+2
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.04-rc3 qspi: - Support for dual/quad mode - Fix speed handling clk: - Add clock enable function for zynq/zynqmp/versal gem: - Enable clock for Versal - Fix error path - Fix mdio deregistration path fpga: - Fix buffer alignment for ZynqMP xilinx: - Fix reset reason clearing in ZynqMP - Show silicon version in SPL for Zynq/ZynqMP - Fix DTB selection for ZynqMP - Rename zc1275 to zcu1275 to match DT name
2021-02-22Merge tag 'u-boot-amlogic-20210222' of ↵Tom Rini1-1/+27
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - adds adc-keys button driver - fix meson-saradc driver to get reference voltage - add adc-keys test for sandbox - enable adc-keys for VIM3 & VIM3L boards - fix button.h build
2021-02-22Merge tag 'ti-v2021.04-rc3' of ↵Tom Rini5-61/+82
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Fix ethernet on J721e - Sync am335x DT nodes from Linux 5.9-rc7 - Minor Clock fixes
2021-02-22arch: sandbox: fix typo in clk.hDario Binacchi1-13/+13
Fix the 'devivce' typo in arch/sandbox/include/asm/clk.h. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-22arm: dts: sync am33xx-clocks with Linux 5.9-rc7Dario Binacchi1-3/+3
The commit 6337d53fdf45 ("arm: dts: sync am33xx with Linux 5.9-rc7") synchronized the am33xx-clocks.dtsi file with Linux 5.9-rc7 with the exception of two nodes. I think I was wrong and it is better to keep the two files similar and possibly make changes to the *-u-boot.dtsi files. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2021-02-22mpc8379erdb: Add device treeSinan Akman2-0/+75
Signed-off-by: Sinan Akman <sinan@writeme.com>
2021-02-21dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIOIgor Opaniuk13-15/+15
Use CONFIG_IS_ENABLED() macro, which provides more convenient way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs for both SPL and U-Boot proper. CONFIG_IS_ENABLED(DM_I2C) expands to: - 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y', - 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y', - 0 otherwise. All occurences were replaced automatically using these bash cmds: $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-20sunxi: support boot console on uart1 for sun8iTobias Schramm2-0/+6
The A23, A33, H3, H5, A83T, V3 and Sochip S3 sun8i SoCs can mux uart1 on GPIOs PG6 and PG7. This patch adds support for using uart1 on those pins as boot console. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-02-20sunxi: spl: Fix H616 clock initializationJernej Skrabec1-0/+5
It turns out that there is a magic bit in PRCM region which seemingly makes PLLs work if it's enabled. Sadly, there is no documentation what it does exactly, so we'll just mimick BSP boot0 behaviour and enable it before any clock is set up. Fixes: b18bd53d6cde ("sunxi: introduce support for H616 clocks") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-02-19Merge tag 'mmc-2021-2-19' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini1-0/+1
- mmc_spi improvement - added mmc-pwrseq to remove duplicated code - fix response timeout after switch command - sdhci: skip cache invalidation if DMA is not used
2021-02-19ARM: mach-meson: select MMC_PWRSEQ configJaehoon Chung1-0/+1
Before time, PWRSEQ is selected since below commit. commit 262d34363373 ("board: amlogic: select PWRSEQ for all amlogic platform") Select MMC_PWRSEQ config because of introducing CONFIG_MMC_PWRSEQ for only eMMC module. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-02-18Merge branch '2021-02-18-SPL-FIT-OP-TEE-Linux-improvements'Tom Rini1-3/+4
- Improve interactions between SPL / OP-TEE and Linux in FIT images
2021-02-18dm: test: Add test case for dev->dma_offsetNicolas Saenz Julienne1-0/+4
Add test to validate dev->dma_offset is properly set on devices. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-02-18dm: test: Add test case for dev_get_dma_ranges()Nicolas Saenz Julienne1-0/+17
Introduce some new nodes in sandbox's test device-tree and dm tests in order to validate dev_get_dma_range(). Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2021-02-18test: add a simple test for the adc-keys button driverMarek Szyprowski1-1/+27
Add adc-keys device to the sandbox/test.dts and connect it to the channel #3 of the sandbox_adc driver. The default values sampled by sandbox_adc driver determines that button3 and button4 are released and button5 is pressed. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-02-18spl: fit: Drop 'length' argument to board_spl_fit_post_load()Alexandru Gagniuc1-3/+4
The size is derived from the FIT image itself. Any alignment requirements are machine-specific and known by the board code. Thus the total length can be derived from the FIT image and knowledge of the platform. The 'length' argument is redundant. Remove it. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> CC: Matt Porter <mporter@konsulko.com>
2021-02-16arm: dts: ls1028a: Add Ethernet switch node and dependenciesAlex Marginean2-1/+119
The definition follows the DSA binding in kernel and describes the switch, its ports and PHYs. The switch node has the same structure as in Linux and this patch enables it (and relevant ports) for the LS1028A RDB board. ENETC PF6 is the 2nd Eth controller linked to the switch on LS1028A, it is not used in U-Boot and was disabled. Ethernet port aliases were also added to better manage the multitude of ports available now. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Michael Walle <michael@walle.cc>
2021-02-16arm: dts: sync am33xx gpio nodes with Linux 5.9-rc7Dario Binacchi3-45/+65
Move gpio controller nodes from am33xx.dtsi to am33xx-l4.dtsi. Now both files are more similar to those found in Linux 5.9-rc7. To be fully operational as before it was also necessary to fix the am33xx-clock.dtsi file. It too is now almost the same as the Linux kernel. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2021-02-16ARM: dts: k3-j7200-common-proc-board-u-boot: Fix broken ethernetVignesh Raghavendra1-0/+1
Since commit 6239cc8c4e ("arm: dts: k3-j7200: Sync Linux v5.11-rc6 dts into U-Boot") ranges have been added to CPSW node which results in U-Boot CPSW driver failing to acquire phy_gmii_sel register range and thus failing to configure GMII mode correctly. Fix this by deleting ranges in -u-boot-dtsi just like its done for other K3 platforms. Fixes: 6239cc8c4e ("arm: dts: k3-j7200: Sync Linux v5.11-rc6 dts into U-Boot") Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2021-02-16image: Adjust the workings of fit_check_format()Simon Glass1-1/+1
At present this function does not accept a size for the FIT. This means that it must be read from the FIT itself, introducing potential security risk. Update the function to include a size parameter, which can be invalid, in which case fit_check_format() calculates it. For now no callers pass the size, but this can be updated later. Also adjust the return value to an error code so that all the different types of problems can be distinguished by the user. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Bruce Monroe <bruce.monroe@intel.com> Reported-by: Arie Haenel <arie.haenel@intel.com> Reported-by: Julien Lenoir <julien.lenoir@intel.com>
2021-02-15Merge branch '2021-02-02-drop-asm_global_data-when-unused'Tom Rini369-11/+378
- Merge the patch to take <asm/global_data.h> out of <common.h>
2021-02-15sh: Remove sh7763rdp boardTom Rini1-5/+0
This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15sh: Remove sh7757lcr boardTom Rini5-330/+1
This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. As this is the last SH4A board, remove that support as well. Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15sh: Remove sh7753evb boardTom Rini1-5/+0
This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15sh: Remove sh7752evb boardTom Rini1-5/+0
This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15sh: Remove r7780mp boardTom Rini1-5/+0
This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. Patch-cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Patch-cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15sh: Remove MigoR boardTom Rini1-5/+0
This board has not been converted to CONFIG_DM by the deadline of v2020.01 and is missing other conversions which depend on this as well. Remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-15ppc: Remove MPC8641HPCN boardTom Rini1-7/+0
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-15ppc: Remove MPC8610HPCD boardTom Rini1-6/+0
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove this board. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 21:49:56 +0300