summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2021-04-08arm: socfpga: Enable FIT signature with crc32 for SOC64 devicesSiew Chin Lim1-5/+25
Add signature with crc32 value for all images in binman node for FIT image in device tree. And, enable FIT signature checking for Stratix10 and Agilex ATF and VAB sdmmc boot. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-04-08arm: socfpga: Changed to store QSPI reference clock in kHzSiew Chin Lim4-11/+58
Changed to store QSPI reference clock in kHz instead of Hz in boot scratch cold0 register for Stratix10 and Agilex. This patch is in preparation for Intel N5X SDRAM driver support. Reserved 4 bits for Intel N5X SDRAM driver, and there will be 28 bits to store QSPI reference clock. Due to limited bits, QSPI reference clock frequency is converted to kHz from Hz. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
2021-04-08arm: socfpga: Move Stratix10 and Agilex clock manager common codeSiew Chin Lim7-19/+13
Move duplicated function cm_get_qspi_controller_clk_hz to clock_manager.c. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2021-04-08arm: socfpga: Restructure Stratix10 and Agilex handoff codeSiew Chin Lim6-82/+126
Restructure Stratix10 and Agilex handoff code to used by all SOC64 devices, in preparation to support handoff for Diamond Mesa. Remove wrap_pinmux_config_s10.c. Add wrap_handoff_soc64.c which contains the generic function to parse the handoff data. Update system_manager_soc64.c to use generic handoff function in wrap_handoff_soc64.c. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2021-04-08arm: socfpga: Rearrange sequence of macros in handoff_soc64.hSiew Chin Lim1-10/+12
Rearrange sequence of macros in handoff_soc64.h without any functionality change. In preparation for Stratix10 and Agilex handoff function restructuring. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-04-08arm: socfpga: Changed system_manager_s10.c to system_manager_soc64.cSiew Chin Lim2-2/+2
Rename to common file name to used by all SOC64 devices. No functionality change. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-04-08arm: socfpga: Changed wrap_pll_config_s10.c to wrap_pll_config_soc64.cSiew Chin Lim2-2/+2
Rename to common file name to used by all SOC64 devices. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-04-08arm: socfpga: Rename Stratix10 and Agilex handoff common macrosSiew Chin Lim5-57/+57
Rename handoff_s10.h to handoff_soc64.h. Changed macros prefix from S10_HANDOFF to SOC64_HANDOFF. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-04-08arm: socfpga: Move Stratix10 and Agilex SPL common codeSiew Chin Lim4-33/+27
Move Stratix10 and Agilex SPL common code to spl_soc64.c. We are in preparation for new n5x device support. No functional change in this patch. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2021-04-08riscv: dts: mpfs-icicle-kit: Drop 'clock-frequency' in the uart nodesBin Meng1-4/+0
The uart nodes already provide <clocks> property for the driver to dynamically calculate the correct clock frequency. There is no need to keep the hard-coded <clock-frequency> property. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com> Tested-by: Padmarao Begari <padmarao.begari@microchip.com>
2021-04-08riscv: assembler versions of memcpy, memmove, memsetHeinrich Schuchardt6-21/+382
Provide optimized versions of memcpy(), memmove(), memset() copied from the Linux kernel. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-04-08riscv: simplify longjmpHeinrich Schuchardt1-6/+2
The value returned by setjmp must be nonzero. If zero is passed as parameter it must be replaced by 1. This patch reduces the code size a bit. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-04-08riscv: sifive: Rename fu540 board to unleashedBin Meng2-4/+4
In preparation to add SiFive Unmatched board support, let's rename the existing fu540 board to unleashed. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-04-08riscv: Add watchdog bindings for the k210Sean Anderson1-1/+0
This adds the necessary bindings. Most of them are already there. Signed-off-by: Sean Anderson <seanga2@gmail.com> Acked-by: Rick Chen <rick@andestech.com>
2021-04-08crypto: caam: Add CAAM support to i.MX8M platformsAymen Sghaier2-0/+4
This patch enable CAAM support for i.MX8M platforms. Signed-off-by: Aymen Sghaier <aymen.sghaier@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08caam: enable support for iMX7ULPFranck LENORMAND3-0/+16
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08mx6dq: hab: Fix chip version in hab.h codeBreno Lima2-1/+2
Since commit 8891410c729b ("MLK-19848 mx6dq: Fix chip version issue for rev1.3") it's not possible to call the HAB API functions on i.MX6DQ SoC Rev 1.3: Authenticate image from DDR location 0x12000000... undefined instruction pc : [<412c00dc>] lr : [<8ff560bc>] reloc pc : [<c8b6d0dc>] lr : [<178030bc>] sp : 8ef444a8 ip : 126e8068 fp : 8ff59aa8 r10: 8ffd51e4 r9 : 8ef50eb0 r8 : 006e8000 r7 : 00000000 r6 : 126ea01f r5 : 0000002b r4 : 126e8000 r3 : 412c00dd r2 : 00000001 r1 : 00000001 r0 : 00000063 Flags: nzCv IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... The hab.h code is defining the HAB API base address according to the old SoC revision number, thus failing when calling the HAB API authenticate_image() function. Fix this issue by using mx6dq rev 1.3 instead of mx6dq rev 1.5. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: cmd_dek: Enable DEK only for chips supporting CAAMYe Li1-1/+1
Since cmd_dek is using CAAM JR, so enable the CMD_DEK only when HAS_CAAM is set Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08iMX8M: Add support to enable CONFIG_IMX_HABYe Li5-1/+18
Add some SOC level codes and build configurations to use HAB lib for CONFIG_IMX_HAB (secure boot), like adding the SEC_CONFIG fuse, enable fuse driver, CAAM clock function, and add CAAM secure RAM to MMU table. The FSL_CAAM is temporally not enabled for iMX8M when CONFIG_IMX_HAB is set, because we don't need the CAAM driver for SPL. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: HAB: Add support for iMX8MMYe Li1-0/+4
The imx8mm has changed the address of rvt_hab, use new address for imx8mm. The authentication procedure is same as imx8mq. In u-boot, the authentication uses SIP call to trap ATF to run HAB authenticate. Users need to add CONFIG_SECURE_BOOT=y to defconfig to enable the feature. Signed-off-by: Ye Li <ye.li@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: hab: Fix build warnings in 32-bit targetsBreno Lima1-2/+2
When building 32-bit targets with CONFIG_SECURE_BOOT and DEBUG enabled the following warnings are displayed: arch/arm/mach-imx/hab.c:840:41: warning: format '%lx' expects argument \ of type 'long unsigned int', but argument 3 has type 'uint32_t \ {aka unsigned int}' [-Wformat=] printf("HAB check target 0x%08x-0x%08lx fail\n", ~~~~^ %08x ddr_start, ddr_start + bytes); arch/arm/mach-imx/hab.c:845:45: warning: format '%x' expects argument \ of type 'unsigned int', but argument 3 has type 'ulong \ {aka long unsigned int}' [-Wformat=] printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n", ivt_offset, ivt_addr); ~^ %lx Fix warnings by providing the correct data type. Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08mx7ulp: hab: Add hab_status command for HABv4 M4 bootBreno Lima2-0/+114
When booting in low power or dual boot modes the M4 binary is authenticated by the M4 ROM code. Add an option in hab_status command so users can retrieve M4 HAB failure and warning events. => hab_status m4 Secure boot disabled HAB Configuration: 0xf0, HAB State: 0x66 No HAB Events Found! Add command documentation in mx6_mx7_secure_boot.txt guide. As HAB M4 API cannot be called from A7 core the code is parsing the M4 HAB persistent memory region. The HAB persistent memory stores HAB events, public keys and others HAB related information. The HAB persistent memory region addresses and sizes can be found in AN12263 "HABv4 RVT Guidelines and Recommendations". Reviewed-by: Utkarsh Gupta <utkarsh.gupta@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: hab: Check if IVT header is HABv4Breno Lima2-4/+1
The HABv4 implementation in ROM checks if HAB major version in IVT header is 4.x. The current implementation in hab.c code is only validating HAB v4.0 and HAB v4.1 and may be incompatible with newer HABv4 versions. Modify verify_ivt_header() function to align with HABv4 implementation in ROM code. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: hab: Display All HAB events via hab_status commandUtkarsh Gupta1-2/+2
Add ability for hab_status command to show All HAB events and not just HAB failure events Signed-off-by: Utkarsh Gupta <utkarsh.gupta@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: hab: Enable hab.c to authenticate additional images in open configurationBreno Lima1-4/+2
Currently it's not possible to authenticate additional boot images in HAB open configuration. The hab.c code is checking if the SEC_CONFIG[1] fuse is programmed prior to calling the hab_authenticate_image() API function. Users cannot check if their additional boot images has been correctly signed prior to closing their device. Enable hab.c to authenticate additional boot images in open mode so HAB events can be retrieved through get_hab_status() function. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08hab: Change calling to ROM API failsafeYe Li1-3/+0
Modify to use hab_rvt_failsafe function for failsafe ROM API, not directly call its ROM address. This function will wrap the sip call for iMX8M platforms. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: HAB: Validate IVT before authenticating imageUtkarsh Gupta1-16/+43
Calling csf_is_valid() with an un-signed image may lead to data abort as the CSF pointer could be pointing to a garbage address when accessed in HAB_HDR_LEN(*(const struct hab_hdr *)(ulong)ivt_initial->csf). Authenticate image from DDR location 0x80800000... Check CSF for Write Data command before authenticating image data abort pc : [<fff5494c>] lr : [<fff54910>] reloc pc : [<8780294c>] lr : [<87802910>] sp : fdf45dc8 ip : 00000214 fp : 00000000 r10: fffb6170 r9 : fdf4fec0 r8 : 00722020 r7 : 80f20000 r6 : 80800000 r5 : 80800000 r4 : 00720000 r3 : 17a5aca3 r2 : 00000000 r1 : 80f2201f r0 : 00000019 Flags: NzcV IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... To avoid such errors during authentication process, validate IVT structure by calling validate_ivt function which checks the following values in an IVT: IVT_HEADER = 0x4X2000D1 ENTRY != 0x0 RES1 = 0x0 DCD = 0x0 /* Recommended */ SELF != 0x0 /* Absoulute address of IVT */ CSF != 0x0 RES2 = 0x0 This commit also checks if Image's start address is 4 byte aligned. commit "0088d127 MLK-14945 HAB: Check if IVT valid before authenticating image" removed as this patch addresses the issue. Signed-off-by: Utkarsh Gupta <utkarsh.gupta@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: HAB: Update hab codes to support ARM64 and i.MX8MPeng Fan2-25/+218
There are some changes to support ARM64 i.MX8M platform in this patches: 1. The hab_rvt base and function vectors are different as i.MX6/7 2. Need to bypass an workaround for i.MX6 to fix problem in MMU. 3. The x18 register needed save & restore before calling any HAB API. According to ARM procedure call spec, the x18 is caller saved when it is used as temporary register. So calling HAB API may scratch this register, and cause crash once accessing the gd pointer. On ARMv7, the r9 is callee saved when it is used as variable register. So no need to save & restore it. 4. Add SEC_CONFIG fuse for iMX8M When current EL is not EL3, the direct calling to HAB will fail because CAAM/SNVS can't initialize at non-secure mode. In this case, we use SIP call to run the HAB in ATF. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: hab: Add function to authenticate kernel imageYe Li1-0/+12
When loading kernel image, the image size is parsed from header, so it does not include the CSF and IVT. Add back the authenticate_image function to wrap the imx_hab_authenticate_image with calculating IVT offset and full image size. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: Avoid hardcoded Job Ring Max sizeBreno Lima2-5/+2
Prior instantiating RNG we have to ensure if the CAAM job rings are available. Avoid hardcoded job ring max size and use the definition at fsl_sec.h Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: Ensure CAAM clock is enabled prior getting out_jr_sizeBreno Lima2-6/+7
Prior calling sec_in32() we have to ensure CAAM clock is enabled, the function sec_in32() is reading CAAM registers and if CAAM clock is disabled the system will hang. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: Avoid hardcoded output ring size register offset (ORSR)Breno Lima2-2/+4
The CAAM output ring size register offset is currently defined in fsl_sec.h as FSL_CAAM_ORSR_JRa_OFFSET, use this definition to avoid hardcoded value in i.MX common code. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: imx7 Support for Manufacturing ProtectionBreno Lima3-0/+160
This code was originally developed by Raul Cardenas <raul.casas@nxp.com> and modified to be applied in U-Boot imx_v2017.03. More information about the initial submission can be seen in the link below: https://lists.denx.de/pipermail/u-boot/2016-February/245273.html i.MX7D has an a protection feature for Manufacturing process. This feature uses asymmetric encryption to sign and verify authenticated software handled between parties. This command enables the use of such feature. The private key is unique and generated once per device. And it is stored in secure memory and only accessible by CAAM. Therefore, the public key generation and signature functions are the only functions available for the user. The manufacturing-protection authentication process can be used to authenticate the chip to the OEM's server. Command usage: Print the public key for the device. - mfgprot pubk Generates Signature over given data. - mfgprot sign <data_address> <data_size> Signed-off-by: Raul Ulises Cardenas <raul.casas@nxp.com> Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx8m: add regs used by CAAMPeng Fan1-0/+10
Add regs used by CAAM Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08iMX8MQ: Recognize the B2 revisionYe Li2-1/+11
i.MX8MQ B2 is using same value in OCOTP_READ_FUSE_DATA like B1, so we have to check the ROM verision to distinguish the revision. As we have checked the B1 rev for sticky bits work around in secure boot. So it won't apply on B2. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08arch: mach-imx: imx8m: fix unique_id read error for imx8mpPeng Fan1-0/+11
The value of Unique ID in uboot and kernel is different for iMX8MP: serial#=02e1444a0002aaff root@imx8mpevk:/sys/devices/soc0# cat soc_uid D699300002E1444A The reason is that Fuse Addresses of Unique ID of iMX8MP are 0x420 and 0x430. Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx8m: soc: update fuse pathPeng Fan1-5/+10
Update fuse path to disable modules correctly. Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx8m: Update thermal and PMU kernel nodes for dual/single coresYe Li1-0/+76
For dual core and single core iMX8M parts, the thermal node and PMU node in kernel DTB also needs update to remove the refers to deleted core nodes. Otherwise both driver will fail to work. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx8mn: Add support for 11x11 UltraLite part numberYe Li4-18/+43
There are 3 part numbers for 11x11 i.MX8MNano with different core number configuration: UltraLite Quad/Dual/Solo Comparing with i.MX8MN Lite parts, they have MIPI DSI disabled. So checking the MIPI DSI disable fuse to recognize these parts. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx8mn: Add low drive mode support for DDR4/LPDDR4 EVKYe Li1-0/+45
Add dedicated defconfigs for iMX8MN low drive mode which set the VDD_SOC and VDD_DRAM to 0.8v, DDR at 1600MTS (800Mhz clock) and GPU at 200Mhz. Signed-off-by: Ye Li <ye.li@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx8mn: Add LPDDR4 EVK board supportPeng Fan5-0/+164
Add support for iMX8MN LPDDR4 EVK board which uses 2GB LPDDR4 and PCA9450B PMIC. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx8mm_evk: Switch to new imx8mm evk boardYe Li2-63/+68
Update PMIC to use PCA9540, the legacy board not supported by NXP Signed-off-by: Ye Li <ye.li@nxp.com>
2021-04-08arm: kirkwood: remove non-dm MMC driver initHarm Berntsen1-7/+0
No board uses this driver any more: remove it. Signed-off-by: Harm Berntsen <harm.berntsen@nedap.com> Reviewed-by: Stefan Roese <sr@denx.de> CC: Gerald Kerma <drEagle@doukki.net> CC: Stefan Roese <sr@denx.de> CC: Pantelis Antoniou <panto@antoniou-consulting.com>
2021-04-07Merge tag 'mmc-2021-4-6' of https://source.denx.de/u-boot/custodians/u-boot-mmcTom Rini1-0/+2
Update hwpartition usage Check bootbus's arguments workaround for erratum A-011334 for fsl_esdhc driver add pulse width detection workaround for fsl_esdhc driver Use alias num before checking mmc index when creating device
2021-04-06Merge tag 'u-boot-amlogic-20210406' of ↵Tom Rini7-238/+0
https://source.denx.de/u-boot/custodians/u-boot-amlogic - Add MMIO MDIO mux driver - Add Amlogic G12A MDIO mux driver - Add DM_MDIO support for designware ethernet driver - Add Amlogic Meson8b and later designware ethernet glue driver - Switch all amlogic boards to Amlogic designware ethernet glue driver - Switch all amlogic boards to DM_MDIO when necessary - Remove all static ethernet setup code
2021-04-06mmc: fsl_esdhc: add pulse width detection workaroundMichael Walle1-0/+1
HS400 mode on the LS1028A SoC isn't reliable. The linux driver has a workaroung for the pulse width detection. Apply this workaround in u-boot, too. This will make HS400 mode work reliably on the LS1028A SoC. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-06mmc: fsl_esdhc: add workaround for erratum A-011334Michael Walle1-0/+1
LS1028A SoCs are restricted in what divider values are allowed for HS400 mode. This is basically a port from the corresponding linux driver. Signed-off-by: Michael Walle <michael@walle.cc>
2021-04-06arm: meson: remove static ethernet link setupNeil Armstrong7-189/+0
The static ethernet link type config code is no more needed because now handled by the meson8b glue driver, delete it. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06arm: meson: remove static ethernet memory power domain enableNeil Armstrong2-6/+0
The ethernet memory power domain is handled by the meson-ee-pwrc driver, delete the static code. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06arm: meson: remove static MDIO mux handlingNeil Armstrong2-45/+2
The static MDIO mux handling in mach-meson is no more needed, delete it. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 12:11:13 +0300