summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2021-04-10rockchip: Pinebook Pro: Enable edpArnaud Patard (Rtp)1-0/+4
- uboot rockchip edp code is looking for a rockchip,panel property for the edp dts node, so add it. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2021-04-10Rockchip: video: edp: Change interrupt polarity configurationArnaud Patard (Rtp)1-1/+3
The linux code is setting polarity configuration to 3 but uboot code is setting it to 1. Change the configuration to match the linux configuration Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2021-04-10rockchip: video: edp: Add rk3399 supportArnaud Patard (Rtp)1-2/+3
According to linux commit "drm/rockchip: analogix_dp: add rk3399 eDP support" (82872e42bb1501dd9e60ca430f4bae45a469aa64), rk3288 and rk3399 eDP IPs are nearly the same, the difference is in the grf register (SOC_CON6 versus SOC_CON20). So, change the code to use the right register on each IP. The clocks don't seem to be the same, the eDP clock is not at index 1 on rk3399, so don't try changing the clock at index 1 to rate 0 on rk3399. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2021-04-10rockchip: video: vop: Use endpoint compatible string to find VOP modeArnaud Patard (Rtp)1-14/+1
The current code is using an hard coded enum and the of node reg value of endpoint to find out if the endpoint is mipi/hdmi/lvds/edp/dp. The order is different between rk3288, rk3399 vop little, rk3399 vop big. A possible solution would be to make sure that the rk3288.dtsi and rk3399.dtsi files have "expected" reg value or an other solution is to find the kind of endpoint by comparing the endpoint compatible value. This patch is implementing the more flexible second solution. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Tested-by: Peter Robinson <pbrobinson@gmail.com>
2021-04-09Merge tag 'u-boot-stm32-20210409' of ↵Tom Rini32-503/+2346
https://source.denx.de/u-boot/custodians/u-boot-stm Add rt-thread art-pi board support based on STM32H750 SoC Add Engicam i.Core STM32MP1 SoM Add FIP header support for STM32programmer Update uart number when no serial device found for STM32MP1 Remove board_check_usb_power function when ADC flag is not set Update SPL size limitation for STM32MP1 Set soc_type, soc_pkg, soc_rev env variables for STM32MP1
2021-04-09Merge branch 'v2021.07-rc1' of https://github.com/lftan/u-bootTom Rini22-199/+318
2021-04-09Merge tag 'u-boot-imx-20210409' of ↵Tom Rini87-175/+14990
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20210409 ------------------- - Secure Boot : - HAB for MX8M / MX7ULP - CAAM fixes - Fixes for imxrt1020 - Fixes for USDHC driver - Fixes for Toradex (Colibri / Apalis) - Switch to DM for several boards - mx23 olinuxo - usbarmory - marsboard / riotboard - Gateworks GW Ventana - NXP upstream patches (LPDDR / CAAM / HAB) CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7089
2021-04-09arm: stm32mp1: Set soc_type, soc_pkg, soc_rev env variablesMarek Vasut1-52/+53
Split up get_soc_name(), clean the decoding up a bit, and set up environment variables which contain the SoC type, package, revision. This is useful on SoMs, where multiple SoC options are populated. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-04-09stm32mp: replace printf by log macro in setup_boot_modePatrick Delaunay1-5/+5
Replace the remaining printf in setup_boot_mode() by log macro to handle filtering for log features. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09stm32mp: update uart number in trace of serial device not foundPatrick Delaunay1-1/+1
Align the uart number in the trace of setup_boot_mode() with the name of the uart/usart device (start at 1) and not with the instance value (start at 0), i.e. the serial device sequence number and the index in serial_addr[]. Fixes: f49eb16c17e2c ("stm32mp: stm32prog: replace alias by serial device sequence number") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09stm32mp: stm32prog: add FIP header supportPatrick Delaunay4-37/+64
Add support of TF-A FIP header in command stm32prog for all the boot partition and not only the STM32IMAGE. This patch is a preliminary patch to support FIP as second boot stage after TF-A BL2 when CONFIG_TFABOOT is activated for trusted boot chain. The FIP is archive binary loaded by TF-A BL2, which contains the secure OS = OP-TEE and the non secure firmware and device tree = U-Boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OFJagan Teki4-0/+213
7" OF is a capacitive touch 7" Open Frame panel solutions with - 7" AUO B101AW03 LVDS panel - EDT, FT5526 Touch MicroGEA STM32MP1 is a STM32MP157A based Micro SoM. MicroDev 2.0 is a general purpose miniature carrier board with CAN, LTE and LVDS panel interfaces. MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0 7" Open Frame Solution board. Linux dts commit details: commit <1d278204cbaa> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 boardJagan Teki5-0/+245
MicroDev 2.0 is a general purpose miniature carrier board with CAN, LTE and LVDS panel interfaces. Genaral features: - Ethernet 10/100 - USB Type A - Audio Out - microSD - LVDS panel connector - Wifi/BT (option) - UMTS LTE with sim connector (option) MicroGEA STM32MP1 is a STM32MP157A based Micro SoM. MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board. Linux dts commit details: commit <f838dae7afd0> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 board") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 Micro SoMJagan Teki1-0/+148
MicroGEA STM32MP1 is a STM32MP157A based Micro SoM. General features: - STM32MP157AAC - Up to 1GB DDR3L-800 - 512MB Nand flash - I2S MicroGEA STM32MP1 needs to mount on top of Engicam MicroDev carrier boards for creating complete platform solutions. Linux dts commit details: commit <0be81dfaeaf8> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 SoM") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09board: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0Jagan Teki4-0/+104
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier board. Genaral features: - Ethernet 10/100 - Wifi/BT - USB Type A/OTG - Audio Out - CAN - LVDS panel connector i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam. i.Core STM32MP1 needs to mount on top of this Carrier board for creating complete i.Core STM32MP1 C.TOUCH 2.0 board. Linux dts commit details: commit <6ca2898df59f> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09board: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter KitJagan Teki5-1/+266
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board. Genaral features: - LCD 7" C.Touch - microSD slot - Ethernet 1Gb - Wifi/BT - 2x LVDS Full HD interfaces - 3x USB 2.0 - 1x USB 3.0 - HDMI Out - Mini PCIe - MIPI CSI - 2x CAN - Audio Out i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam. i.Core STM32MP1 needs to mount on top of this Evaluation board for creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit. Linux dts commit details: commit <adc0496104b6> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09ARM: stm32: Imply SPL_SPI_LOADJagan Teki1-1/+1
SPI Load isn't mandatory for STM32 builds. Let's imply instead of select it to get rid of build issues for non-SPI defconfigs. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09ARM: dts: stm32: Add Engicam i.Core STM32MP1 1X4Gb DDR3Jagan Teki1-0/+119
Engicam i.Core STM32MP1 SODIMM SoM has mounted 1x4Gb DDR3 which has 32bits width 528000Khz frequency. Add DDR configuration via dtsi. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09ARM: dts: stm32: Add Engicam i.Core STM32MP1 SoMJagan Teki1-0/+196
i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam. General features: - STM32MP157A - Up to 1GB DDR3L - 4GB eMMC - 10/100 Ethernet - USB 2.0 Host/OTG - I2S - MIPI DSI to LVDS - rest of STM32MP157A features i.Core STM32MP1 needs to mount on top of Engicam baseboards for creating complete platform solutions. Linux commit details: commit <30f9a9da4ee1> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1 SoM") Add support for it. Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2021-04-09board: Add rt-thread art-pi board supportdillon min1-0/+4
All these files are add for support rt-thread art-pi board - add board/st/stm32h750-art-pi, defconfig, header support for u-boot for more information about art-pi, please goto: https://art-pi.gitee.io/website/ Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6dillon min5-1/+365
This patchset has following changes: - introduce stm32h750.dtsi to support stm32h750 value line - add pin groups for usart3/uart4/spi1/sdmmc2 - add stm32h750i-art-pi.dtb (arch/arm/boot/dts/Makefile) - add stm32h750i-art-pi.dts to support art-pi board - add stm32h750i-art-pi-u-boot.dtsi to support art-pi board (u-boot) art-pi board component: - 8MiB qspi flash - 16MiB spi flash - 32MiB sdram - ap6212 wifi&bt&fm the detail board information can be found at: https://art-pi.gitee.io/website/ Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09ARM: dts: stm32: fix i2c node typo in stm32h743, update dmamux1 registerdillon min1-3/+3
Replace upper case by lower case in i2c nodes name. update dmamux1 register range. Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09ARM: dts: stm32: add new instances for stm32h743 MCUdillon min1-0/+30
Some instances are missing in current support of stm32h743 MCU. This commit adds usart3/uart4 and sdmmc2 support. Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750dillon min5-308/+329
This patch is intend to add support stm32h750 value line, just add stm32h7-pinctrl.dtsi for extending, with following changes: - rename stm32h743-pinctrl.dtsi to stm32h7-pinctrl.dtsi - move 'pin-controller' from stm32h7-pinctrl.dtsi to stm32h743.dtsi - update stm32h743i-{disco, eval}.dts to include stm32h7-pinctrl.dtsi Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09ARM: dts: stm32: split sdram pin & timing parameter into specific board dtsdillon min3-95/+201
As different boards has their own sdram hw connection, mount different sdram modules, so move sdram timing parameter and pin configuration to their board device tree. Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-04-09imx: bootaux fix elf loadingMax Krummenacher1-1/+66
This reverts the arch/arm/mach-imx/imx_bootaux.c changes of commit 805b3cac1e0c. The loader function name was changed so that it does not clash with the generically available function in lib/elf.c. imx-bootaux loads an elf file linked for an auxilary core. Thus the loader function requires address translation from the auxilary core's address space to where those are mapped into U-Boot's address space. So the elf loader is specific and must not be replaced with a generic loader which doesn't provide the address translation functionality. Fixes commit 805b3cac1e0c ("lib: elf: Move the generic elf loading/validating functions to lib") Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-04-09mmc: fsl_esdhc_imx: add extra delay for IO voltage switch if necessaryHaibo Chen1-0/+1
Some board like imx8mm-evkb, IO voltage switch from 3.3v to 1.8v need around 18ms, common code only delay 10ms, so need to delay extra 8ms. Otherwise voltage switch will timeout when wait for data0 line. This IO voltage switch time depends on board design, depend on the PMIC and capacitance. imx8mm-evkb board use PCA9450(PMIC) and 10uF capacitance. Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
2021-04-09imx: imx6ull: fix pinmux sel_input value for uart5 pinsYuichiro Goto1-4/+4
sel_input value for the following uart5 pins is different between i.MX6UL and i.MX6ULL: MX6_PAD_UART5_TX_DATA__UART5_DTE_RX MX6_PAD_UART5_RX_DATA__UART5_DCE_RX MX6_PAD_ENET1_RX_EN__UART5_DCE_RTS MX6_PAD_ENET1_TX_DATA0__UART5_DTE_RTS MX6_PAD_CSI_DATA02__UART5_DCE_RTS As sel_input value for the second one is fixed by the previous commit, fix the rest. Signed-off-by: Yuichiro Goto <goto@k-tech.co.jp>
2021-04-09ARM: pcm058: Match mainline Linux NAND ECC layout/behaviourNiel Fourie1-0/+4
Enabled "fsl,legacy-bch-geometry" in U-Boot device tree overlay to match the legacy BCH geometry layout, which mainline Linux applies when "fsl,use-minimum-ecc" is not specified in the device tree. Reinstated SYS_NAND_ONFI_DETECTION, which when disabled, masked the mismatch on SOMs with Winbond NAND flash chips. Signed-off-by: Niel Fourie <lusus@denx.de>
2021-04-09mx23_olinuxino: convert MMC to driver modelTrevor Woerner1-0/+5
Convert the Olimex Olinuxino board's support for MMC to driver model following Fabio Estevam's excellent example from: commit: 23013aa9619881290dbeb6217f1fab863869050e: mx23evk: Convert to driver model Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-04-09mx23_olinuxino: enable device treeTrevor Woerner2-0/+134
Add the dts file for the Olimex Olinuxino from the linux kernel, and enable its use in this machine's defconfig. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2021-04-08ARM: imx: udoo: Convert block devices to DMPeter Robinson1-0/+7
Enable DM block, DM MMC and DM SATA support on iMX6 Udoo convert board code to match the DM support. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2021-04-08ARM: board: udoo: Import UDOO dts filesPeter Robinson4-0/+358
Import the i.MX6 based UDOO dts files from Linux 5.12-rc1. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-04-08ARM: embestmx6boards: convert the mars/riot boards to DM_MMCPeter Robinson2-0/+16
Convert the two Embest boards to use DM MMC. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: "Eric Bénard" <eric@eukrea.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2021-04-08ARM: embestmx6boards: Import the marsboard/riotboard. dts filesPeter Robinson3-0/+1013
Import the iMX6 based marsboard and riotboard. dts files from Linux 5.12-rc1 Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-04-08arm: dts: imx8mn, imx8mn-beacon: Sync dts files with Kernel 5.12-rc5Adam Ford3-8/+172
There have been a few updates including flexspi, so it's necessary to re-sync. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-04-08ARM: board: usbarmory: Import the usbarmory dts filePeter Robinson2-1/+227
Import the iMX53 based usbarmory dts files from Linux 5.12-rc1 Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Andrej Rosano <andrej@inversepath.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-04-08imx: ventana: enable dm support for MMC and SATATim Harvey7-0/+8
Enable driver model support for MMC and SATA. Note that DM_MMC requires aliases for your mmc devices so they are added to the dts. Linux does not support enumerating mmc devices by alias so these are not present in the Linux dts. Note that we still need board_mmc_init() and board_mmc_getcd() for not DM SPL to support MMC. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-04-08arm: dts: imx6qdl-gw*: add dr_mode prop to dt to avoid errorTim Harvey13-0/+13
The fsl-usb dt bindings in Linux default dr_mode to 'host' for backward compatibility however U-Boot prints an error if this property does not exist. Declare it in the Gateworks Ventana device-trees to avoid the error. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-04-08imx: ventana: add Gateworks Ventana dtsTim Harvey43-0/+11153
Add Gateworks Ventana dts/dtsi files from Linux 5.11 in preparation for conversion to driver-model. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-04-08ARM: imx: Add OCRAM_S into iMX8M MMU tablesMarek Vasut1-0/+7
The OCRAM_S is regular memory, just like the OCRAM, add it to the MMU tables so it can be used and cached. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2021-04-08imx8mp-evk: switch to use binmanPeng Fan2-0/+107
Use binman to pack images Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx8mn-evk: switch to use binmanPeng Fan2-0/+103
Use binman to pack images. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx8mn-ddr4-evk: switch to use binmanPeng Fan2-0/+107
Use binman to pack images Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx8mm_evk: switch to use binman to pack imagesPeng Fan2-0/+107
Use binman to pack images Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx8: Add DEK blob encapsulationClement Faure4-0/+171
Add DEK encapsulation support for imx8. The DEK blob is generated by the SECO through the SCFW API. Signed-off-by: Clement Faure <clement.faure@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx8m: Add DEK blob encapsulation for imx8mClement Faure5-11/+125
Add DEK blob encapsulation support for IMX8M through "dek_blob" command. On ARMv8, u-boot runs in non-secure, thus cannot encapsulate a DEK blob for encrypted boot. The DEK blob is encapsulated by OP-TEE through a trusted application call. U-boot sends and receives the DEK and the DEK blob binaries through OP-TEE dynamic shared memory. To enable the DEK blob encapsulation, add to the defconfig: CONFIG_SECURE_BOOT=y CONFIG_FAT_WRITE=y CONFIG_CMD_DEKBLOB=y Signed-off-by: Clement Faure <clement.faure@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08imx: caam: new u-boot command to set PRIBLOB bitfield from CAAM SCFGR ↵Clement Le Marquis3-0/+41
register to 0x3 It is highly recommended to set the PRIBLOB bitfield to 0x3 once your encrypted boot image has booted up, this prevents the generation of new blobs that can be used to decrypt an encrypted boot image. The PRIBLOB is a sticky type bit and cannot be changed until the next power on reset. Add the set_priblob_bitfield U-Boot command to prevent the generation of new blobs. Signed-off-by: Clement Le Marquis <clement.lemarquis@nxp.com> Acked-by: Ye Li <Ye.Li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini10-36/+388
- Watchdog, Unleashed and Icicle improvements
2021-04-08arm: socfpga: smc: Add function to get usercodeSiew Chin Lim2-0/+18
Add function to send mailbox command via SMC to get usercode from SDM. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 09:10:13 +0300