summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2020-01-16ARM: MediaTek: add basic support for MT8512 boardsmingming lee2-0/+107
This adds a general board file based on MT8512 SoCs from MediaTek. Apart from the generic parts (cpu) we add some low level init codes and initialize the early clocks. This commit is adding the basic boot support for the MT8512 eMMC board. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-16ARM: MediaTek: Add support for MediaTek MT8512 SoCmingming lee6-0/+245
Add support for MediaTek MT8512 SoC. This include the file that will initialize the SoC after boot and its device tree. Signed-off-by: mingming lee <mingming.lee@mediatek.com>
2020-01-15Merge tag 'u-boot-imx-20200115' of ↵Tom Rini23-8/+1009
https://gitlab.denx.de/u-boot/custodians/u-boot-imx ----------------------------------- - imx8: add capricorn giedi deneb boards - imx6: fixed fow wandboard - imx7: DM_ETHER for pico-imx7d - fsl_esdhc_imx: add broken-cd property - New SOC: IMXRT10xx Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/637126531
2020-01-15imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVKGiulio Benetti4-0/+258
This commit adds board support for i.MXRT1050-EVK from NXP. This board is an evaluation kit provided by NXP for i.MXRT105x processor family. More information about this board can be found here: https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK The initial supported/tested devices include: - Debug serial - SD Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-15imx: Add basic support for the NXP IMXRT10xx SoC familyGiulio Benetti11-3/+140
Add i.IMXRT family basic support. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-15ARM: dts: imxrt1050: add dtsi fileGiulio Benetti1-0/+146
Add dtsi file for i.MXRT1050. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-15armv7m: cache: add mmu_set_region_dcache_behaviour() stub for compatibilityGiulio Benetti1-0/+6
Since some driver requires this function add it as an empty stub when DCACHE is OFF. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2020-01-15imx: dts: imx8dx: add I2C IPG clock for bus 0 and 2Anatolij Gustschin1-4/+6
IPG clock description is missing for I2C0 and I2C2 busses, add it. Otherwise we see -ENODATA error when trying to get I2C clock for these busses. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-01-15ARM: dts: imx6ul-14x14-evk: Pass the "broken-cd" propertyFabio Estevam1-0/+1
imx6ul-14x14-evk does not have a GPIO dedicated for reading the card detect pin on the eSDHC2 port. In such cases the "broken-cd" property must be passed, otherwise the card cannot be detected. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-01-15imx: add imx8x based deneb boardAnatolij Gustschin3-0/+16
Add support for Capricorn Deneb SoM variant. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-15imx: add imx8x capricorn giedi boardAnatolij Gustschin5-1/+436
Add support for i.MX8X based Capricorn Giedi SoM. Supported interfaces: GPIO, ENET, eMMC, I2C, UART. Console output: U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) Trying to boot from MMC1 Load image from MMC/SD 0x3e400 U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07 CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C Model: Siemens Giedi Board: Capricorn Boot: MMC0 DRAM: 1022 MiB MMC: FSL_SDHC: 0 Loading Environment from MMC... OK In: serial@5a080000 Out: serial@5a080000 Err: serial@5a080000 Net: eth1: ethernet@5b050000 [PRIME] Autobooting in 1 seconds, press "<Esc><Esc>" to stop Signed-off-by: Anatolij Gustschin <agust@denx.de>
2020-01-14tegra: fdt: Add tegra186-u-boot.dtsiStephen Warren1-0/+3
All Tegra chips except Tegra186 have a tegraNNN-u-boot.dtsi. Duplicate Tegra210's copy of this file for Tegra186. This ensures that a /binman node exists in U-Boot's control DT. Subsequent to 3c10dc95bdd0 ("binman: Add a library to access binman entries") this appears to be required. I haven't really investigated why all this is necessary or how it works, but simply observed the boot failure listed below, bisected it, noticed the inconsistency in DT files, and found that fixing it resolved the boot issue. U-Boot 2020.01-rc4-00256-g3c10dc95bdd0 (Jan 07 2020 - 10:25:00 -0700) SoC: tegra186 Model: NVIDIA P2771-0000-500 Board: NVIDIA P2771-0000 DRAM: 7.8 GiB initcall sequence 00000000fffb7858 failed at call 00000000800955a8 (err=-22) ### ERROR ### Please RESET the board ### Fixes: 3c10dc95bdd0 ("binman: Add a library to access binman entries") Fixes: f2faffecb016 ("binman: tegra: Convert to use binman") Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-10arm: cpu: armv8: add support for arm psci reset2.Rajesh Ravi3-0/+21
Current U-Boot has only support for psci reset. Adding support for arm psci reset2 allows passing of reset level and other platform sepcific parameters like strap settings to lowlevel psci implementation. Signed-off-by: Rajesh Ravi <rajesh.ravi@broadcom.com> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
2020-01-10arch: arm: Program GIC LPI configuration tableBharat Kumar Reddy Gooty4-0/+245
Programs the following: 1. Redistributor PROCBASER configuration table (which is common for all redistributors) 2. Redistributor pending table (PENDBASER), for all the available redistributors. Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
2020-01-10m68k: Drop CONFIG_MCFPIT supportTom Rini2-105/+0
All platforms currently use the "MCFTMR" DMA timer rather than the PIT timer, so drop the MCFPIT code. Cc: Huan Wang <alison.wang@nxp.com> Cc: Angelo Dureghello <angelo@sysam.it> Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Cc: Wolfgang Wegner <w.wegner@astro-kom.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Angelo Dureghello <angelo@sysam.it>
2020-01-10m68k: add dm fec supportAngelo Durgehello10-44/+151
Add architecture-related code for dm fec support. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-10m68k: add fec fdt overrides to all boardsAngelo Durgehello42-0/+290
Add ethernet controller overrides for all involved boards. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-10m68k: add fec base node to devicetreesAngelo Durgehello12-1/+186
Add basic ethernet controller devicetree nodes for all ColdFire families. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
2020-01-09Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-mpc83xxTom Rini4-3/+12
- A small PR with MC8309 fixes from Rasmus.
2020-01-09Merge tag 'dm-pull-8jan20' of git://git.denx.de/u-boot-dmTom Rini3-11/+33
dm: Increased separation of ofdata_to_platdata() and probe methods
2020-01-09Merge tag 'efi-2020-04-rc1' of ↵Tom Rini1-0/+4
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-04-rc1 This pull request provides: * support for FIT images for UEFI binaries * drivers for hardware random number generators * an implementation of the EFI_RNG_PROTOCOL * a sub-command for efidebug to display configuration tables
2020-01-08Merge tag 'uniphier-v2020.04' of ↵Tom Rini1-0/+10
https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier UniPhier SoC updates for v2020.04 - add pinmux nodes for I2C ch5, ch6 - enable SPI driver and command
2020-01-08Merge tag 'u-boot-imx-20200108' of ↵Tom Rini21-51/+3709
https://gitlab.denx.de/u-boot/custodians/u-boot-imx --------------------------------------------------------------------- Add i.MX8MP SoC and EVK board Update README for i.MX8MN EVK and fix mmc env Add pca9450 driver -------------------------------------------------------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
2020-01-08Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini56-1282/+2322
2020-01-08Merge tag 'u-boot-amlogic-20200108' of ↵Tom Rini3-0/+97
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - Khadas VIM3L based on Amlogic S905D3 support - Various fixups for amlogic boards - Unnecessary header includes drop into video/meson
2020-01-08ARM: dts: uniphier: add pinmux nodes for I2C ch5, ch6Masahiro Yamada1-0/+10
The next generation SoC can connect on-board slave devices via I2C ch5 and ch6. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-08imx: add i.MX8MP EVK boardPeng Fan4-1/+361
Add basic i.MX8MP EVK board support U-Boot SPL 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) power_pca9450b_init DDRINFO: start DRAM init DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done Normal Boot Failed to find clock node. Check device tree WDT: Not found! Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2020.01-rc4-00388-gb1bf40c0ae-dirty (Dec 30 2019 - 17:55:33 +0800) CPU: Freescale i.MX8MP rev1.0 at 1000 MHz Reset cause: POR Model: NXP i.MX8MPlus EVK board DRAM: 6 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 u-boot=> mmc list FSL_SDHC: 1 (SD) FSL_SDHC: 2 Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: imx8m: add imximage-8mp-lpddr4.cfgPeng Fan1-0/+17
Add imximage-8mp-lpddr4.cfg for imximage usage, almost same as i.MX8MN ddr4 cfg, but with different ddr firmware Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: imx8m: only support non-dm code in clock_imx8mm.cPeng Fan1-33/+306
The drivers/clk/imx/*.c are used for CLK dm case, the clock_imx8mm.c is used for non CLK dm case, let's split it. Sometimes it is hard to enable CLK dm in SPL stage, considering code size, malloc size requirement, the splittion will make it easy to use non CLK dm in SPL stage. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: Kconfig: make SPL_IMX_ROMAPI_LOADADDR visible to i.MX8MPPeng Fan1-2/+1
i.MX8MP ROM support ROMAPI as i.MX8MN, so make SPL_IMX_ROMAPI_LOADADDR visible to i.MX8MP Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: add i.MX8MP PE propertyPeng Fan1-1/+1
i.MX8MP does not have LVTTL, it has a PE property Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: imx8mp: add pin header filePeng Fan1-0/+1080
Add pin header file for i.MX8MP Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08arm: dts: freescale: Add i.MX8MP dtsi supportPeng Fan1-0/+598
The i.MX8M Plus Media Applications Processor is part of the growing mScale family targeting the consumer and industrial market. It brings an effective Machine Learning and AI accelerator that enables a new class of applications. It is built in Samsung 14LPP to achieve both high performance and low power consumption and relies on a powerful fully coherent core complex based on a quad core ARM Cortex-A53 cluster and Cortex-M7 low-power coprocessor, audio digital signal processor, machine learning and graphics accelerators. Add the basic dtsi support for i.MX8MP. Patch from Anson Huang for Kernel https://patchwork.kernel.org/patch/11310915/ Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: imx8m: add 1GHz fracpll entryPeng Fan1-0/+1
4000MTS DDR needs 1GHz fracpll, so add the entry Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: imx8mp: add basic clockPeng Fan4-3/+386
i.MX8MP has similar architecture as i.MX8MN, but it has different clk root and index, so add that to make i.MX8MP could use the non-dm clock driver. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08arm: dts: add i.MX8MP pinfunc headerPeng Fan1-0/+931
Add i.MX8MP pinfunc header for dts usage Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: spl: support i.MX8MP spl_boot_devicePeng Fan1-1/+2
i.MX8MP follows i.MX8MN, so just let it use spl_board_boot_device Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: imx8m: add Kconfig entry for i.MX8MPPeng Fan1-0/+4
Add Kconfig entry for i.MX8MP Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: cpu: enlarge bit mask to 0x1FF for cpu typePeng Fan1-2/+2
i.MX8MP use 0x182 as dummy id, 0xFF is not able the get the highest bit, so enlarge bit mask to 0x1FF to make it could detect cpu type correctly Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx8mp: set BYPASS ID SWAP to avoid AXI bus errorsPeng Fan1-1/+1
Set the BYPASS ID SWAP bit (GPR10 bit 1) in order for GPU not to generated AXI bus errors with TZC380 enabled. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: get cpu id/type of i.MX8MPPeng Fan4-2/+9
Support get i.MX8MP cpu id and cpu type Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-08imx: imx8mq: handle ESDHC in mxc_get_clockPeng Fan1-5/+9
fsl_esdhc_imx driver will call "mxc_get_clock(MXC_ESDHC_CLK + dev->seq)", however mxc_get_clock wrongly handle MXC_ESDHC_CLK as root clk and cause sd card could not be detected in U-Boot proper, as below: "Loading Environment from MMC... unable to select a mode" Handle MXC_ESDHC_CLK in mxc_get_clock to fix the issue. Signed-off-by: Peng Fan <peng.fan@nxp.com> Tested-by: Baruch Siach <baruch@tkos.co.il> Tested-by: Fabio Estevam <festevam@gmail.com>
2020-01-08mpc83xx: set MPC83XX_GPIO_CTRLRS to 2 for MPC8309Rasmus Villemoes1-1/+2
The MPC8309 has two gpio controllers (which is already correctly reflected in its struct immap definition). Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Mario Six <mario.six@gdsys.cc>
2020-01-08mpc83xx: immap_83xx: add spi8xxx_t in immap for mpc8309Rasmus Villemoes2-2/+2
Allow drivers/spi/mpc8xxx_spi.c to be built for an mpc8309 target. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Mario Six <mario.six@gdsys.cc>
2020-01-08powerpc: mpc83xx: convert CONFIG_FSL_ELBC to KconfigRasmus Villemoes1-0/+7
This complements commit 068789773d0 which did the conversion for mpc85xx. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Mario Six <mario.six@gdsys.cc>
2020-01-08mpc83xx: make ARCH_MPC8309 select SYS_FSL_ERRATUM_ESDHC111Rasmus Villemoes1-0/+1
The mpc8309 is also affected by the "Manual Asynchronous CMD12 abort operation causes protocol violations" erratum, though it is enumerated as eSDHC16 in the errata sheet for mpc8309. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Mario Six <mario.six@gdsys.cc>
2020-01-08dm: test: Add a test driver for devresSimon Glass1-0/+4
Add a driver which does devres allocations so that we can write tests for devres. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-08x86: apl: Avoid accessing the PCI bus before it is probedSimon Glass2-11/+29
The PCI bus is not actually probed by the time the ofdata_to_platdata() method is called since that happens in the uclass's post_probe() method. Update the PMC and P2SB drivers to access the bus in its probe() method. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-07sandbox: rng: Add a random number generator(rng) driverSughosh Ganu1-0/+4
Add a sandbox driver for random number generation. Mostly aimed at providing a unit test for rng uclass. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07stm32mp1: reset coprocessor status at cold bootFabien Dessenne1-0/+7
Reset ResourceTableAddress and CoprocessorState at cold boot, preserve these values at standby wakeup. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-23 17:29:23 +0300