summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-10-16arm: octeontx: Select CLKStefan Roese1-0/+2
Clock support is needed for all Octeon TX/TX2 boards. This patch selects CONFIG_CLK so that it is available. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Suneel Garapati <sgarapati@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com>
2020-10-16mmc: octeontx_hsmmc.c: Remove test debug messageStefan Roese1-1/+0
Remove a left-over debug test message from the Octeon TX / TX2 MMC driver. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Suneel Garapati <sgarapati@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com>
2020-10-16spi: octeon_spi: Use a fixed 100MHz input clock on Octeon TX2Stefan Roese1-1/+4
Octeon TX2 sets the TB100_EN bit in the config register. We need to use a fixed 100MHz clock for this as well to work properly. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Suneel Garapati <sgarapati@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Jagan Teki <jagan@amarulasolutions.com>
2020-10-16ram: imxrt: Include device_compat.hSean Anderson1-0/+1
Necessary for dev_xxx. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-10-16phy: Include device_compat.hSean Anderson1-1/+1
Necessary for dev_xxx. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-10-16net: ldpaa_eth: Include device_compat.hSean Anderson1-7/+7
Necessary for dev_xxx. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-10-16mtd: mxs_nand: Fix not calling dev_xxx with a deviceSean Anderson1-13/+15
This includes device_compat.h, and fixes several calls to dev_xxx. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-10-16firmware: scmi: Include device_compat.hSean Anderson3-0/+3
This header is necessary for the dev_xxx macros. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-16dm: syscon: Set LOG_CATEGORYSean Anderson1-0/+2
We call log_debug, but do not have a category set. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-16clk: sifive: Include device_compat.hSean Anderson1-7/+7
Necessary for dev_xxx. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-10-15Merge tag 'mmc-2020-10-14' of ↵Tom Rini16-237/+556
https://gitlab.denx.de/u-boot/custodians/u-boot-mmc - fsl_esdhc_imx cleanup - not send cm13 if send_status is 0. - Add reinit API - Add mmc HS400 for fsl_esdhc - Several cleanup for fsl_esdhc - Add ADMA2 for sdhci
2020-10-15configs: smdkv310: get rid of unused EXYNOS4_DEFAULT_UART_OFFSETAndre Heider1-3/+0
Unused. Signed-off-by: Andre Heider <a.heider@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-10-15Remove whitelist entry CONFIG_DEFAULT_CONSOLEAndre Heider1-1/+0
There're no users left. Signed-off-by: Andre Heider <a.heider@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-10-15treewide: configs: fold CONFIG_DEFAULT_CONSOLEAndre Heider6-34/+6
In prepartion to remove CONFIG_DEFAULT_CONSOLE, fold the current users. Signed-off-by: Andre Heider <a.heider@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-10-15treewide: configs: get rid of unused CONFIG_DEFAULT_CONSOLEAndre Heider10-29/+0
These are all unused. Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-10-14Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini46-179/+14918
- Octeon TX: Add NAND driver (Suneel) - Octeon TX: Add NIC driver driver (Suneel) - Octeon TX2: Add NIC driver driver (Suneel) - Armada 8040: Add iEi Puzzle-M80 board support (Luka) - Armada A37xx SPI: Add support for CS-GPIO (George) - Espressobin: Use Linux model/compatible strings (Andre) - Espressobin: Add armada-3720-espressobin-emmc.dts from Linux (Andre) - Armada A37xx: Small cleanup of config header (Pali)
2020-10-14Merge branch '2020-10-14-assorted-changes'Tom Rini40-128/+1378
- Add support for Linux "pstore" dumps. - Button command fixup. - gd cleanup and documentation. - Assorted other cleanups.
2020-10-14doc: Sphinx.override_domain() deprecatedHeinrich Schuchardt1-1/+4
Sphinx.override_domain() is deprecated since Sphinx 1.8 and removed in Sphinx 3. Use Sphinx.add_domain(, override=True) instead. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-14net: e1000: add defaults for i210 TX/RX PBSIZEChristian Gmeiner2-0/+11
Set the defaults on probe for the packet buffer size registers for the i210. The TX/RX PBSIZE register of the i210 resets to its default value only at power-on - see Intel Ethernet Controller I210 Datasheet rev 3.5 chapter 8.3 'Internal Packet Buffer Size Registers'. If something (another driver, another OS, etc.) modifies this register from its default value, the e1000 driver doesn't function correctly. It detects a hang of the transmitter and continuously resets the adapter. Here we set this value to its default when resetting the i210 to resolve this issue. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2020-10-14checkpatch.pl: Make CONFIG_IS_ENABLED(CONFIG_*) an errorAlper Nebi Yasak2-0/+12
CONFIG_IS_ENABLED() takes the kconfig name without the CONFIG_ prefix, e.g. CONFIG_IS_ENABLED(CLK) for CONFIG_CLK. Make including the prefix an error in checkpatch.pl so calls in the wrong format aren't accidentally reintroduced. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-14treewide: Fix wrong CONFIG_IS_ENABLED() handlingAlper Nebi Yasak3-10/+10
CONFIG_IS_ENABLED() takes the kconfig name without the CONFIG_ prefix, e.g. CONFIG_IS_ENABLED(CLK) for CONFIG_CLK. Some of these were being fixed every now and then, see: commit 71ba2cb0d678 ("board: stm32mp1: correct CONFIG_IS_ENABLED usage for LED") commit a5ada25e4213 ("rockchip: clk: fix wrong CONFIG_IS_ENABLED handling") commit 5daf6e56d36c ("common: console: Fix duplicated CONFIG in silent env callback") commit 48bfc31b6484 ("MIPS: bootm: Fix broken boot_env_legacy codepath") Fix all files found by `git grep "CONFIG_IS_ENABLED(CONFIG"` by running ':%s/CONFIG_IS_ENABLED(CONFIG_\(\w+\))/CONFIG_IS_ENABLED(\1)/g' in vim. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-14doc: global data pointerHeinrich Schuchardt2-0/+54
Add the description of the global data pointer to the generated HTML documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-14global_data.h: add Sphinx documentationHeinrich Schuchardt1-55/+317
Add the missing Sphinx documentation for struct global_data and gd_board_type(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-14global_data.h: convert GD_FLG_* to enumHeinrich Schuchardt1-22/+84
Sphinx documentation is only available for enums not for #defines. Anyway it is better to keep related definitions in an enum. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-14bootm: add {arch,board}_preboot_os() to bootm.hHeinrich Schuchardt1-0/+10
Functions that are used in multiple C modules should be defined in an include. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Michael Walle <michael@walle.cc>
2020-10-14time: Fix get_ticks being non-monotonicSean Anderson1-2/+2
get_ticks does not always succeed. Sometimes it can be called before the timer has been initialized. If it does, it returns a negative errno. This causes the timer to appear non-monotonic, because the value will become much smaller after the timer is initialized. No users of get_ticks which I checked handle errors of this kind. Further, functions like tick_to_time mangle the result of get_ticks, making it very unlikely that one could check for an error without suggesting a patch such as this one. This patch panics if we ever get an error. There are two cases in which this can occur. The first is if we couldn't find/probe the timer for some reason. One reason for this is if the timer is not available so early. This likely indicates misconfiguration. Another reason is that the timer has an invalid/missing device tree binding. In this case, panicing is also correct. The second case covers errors calling get_count. This can only occur if the timer is missing a get_count function (or on RISC-V, but that should be fixed soon). Fixes: c8a7ba9e6a5 Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-14spl: Add SPL_SERIAL as requirement for SDP_USB_SDPOtavio Salvador1-0/+1
The USB SDP protocol require the SPL serial support to allow the build to succeed. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2020-10-14spl: Avoid printing boot device if silent console is enabledOtavio Salvador1-1/+3
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-14env/ext4.c: allow loading from an EXT4 partition on the MMC boot deviceDavid Woodhouse2-0/+18
This parallels what I added for FAT in commit 6731bef6966, allowing the environment to be found in a specific partition on the device that the board's mmc_get_env_dev() returns. On the Banana Pi R2 that means the device that U-Boot was loaded from; either the internal eMMC or an SD card. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-10-14mmc: remove duplicate mmc_get_env_dev() implementationsDavid Woodhouse3-14/+9
Since it's so trivial I could just about tolerate this when there were only two copies of it. But now there are about to be three. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-10-14arm: enable DM_RNG on QEMU by defaultHeinrich Schuchardt1-0/+1
The EFI_RNG_PROTOCOL is needed for address randomization in Linux. We should provide it by default on QEMU. Reported-by: François Ozog <francois.ozog@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-10-14cmd/button: return button statusHeinrich Schuchardt2-10/+28
To make the button command useful in a shell script it should return the status of the button: * 0 (true) - pressed, on * 1 (false) - not pressed, off The button command takes only one argument. Correct maxargs. Adjust the Python unit test. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-10-14drivers: gpio: keep output value for input on sandboxHeinrich Schuchardt1-1/+9
For testing purposes keep the output value when switching to input. This allows us to manipulate the input value via the gpio command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-10-14test: sharpen button label unit testHeinrich Schuchardt4-12/+12
Using different strings for the device tree node labels and the label property of buttons sharpens the button label unit test. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-10-14cmd: Fixup DT to pass PStore Ramoops parametersFrédéric Danis4-0/+47
To simplify configuration and keep synchronized the PStore/Ramoops between U-Boot and the Linux kernel, this commit dynamically adds the Ramoops parameters defined in the U-Boot session to the Device Tree. Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> Cc: Tom Rini <trini@konsulko.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2020-10-14test: Add PStore command testsFrédéric Danis6-0/+81
Add PStore command to sandbox and sandbox64 defconfigs. Add test checking: - 'pstore display' of all records - 'pstore display' only the 2nd dump record - 'pstore save' of all records Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> [trini: Adjust to always load files from source directory] Signed-off-by: Tom Rini <trini@konsulko.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2020-10-14cmd: Add command to display or save Linux PStore dumpsFrédéric Danis5-0/+665
This patch adds a new pstore command allowing to display or save ramoops logs (oops, panic, console, ftrace and user) generated by a previous kernel crash. PStore parameters can be set in U-Boot configuration file, or at run-time using "pstore set" command. Records size should be the same as the ones used by kernel, and should be a power of 2. This command allows: - to display uncompressed logs - to save compressed or uncompressed logs, compressed logs are saved as a compressed stream, it may need some work to be able to decompress it, e.g. adding a fake header: "printf "\x1f\x8b\x08\x00\x00\x00\x00\x00\x00\x00" | cat - dmesg-ramoops-0.enc.z | gzip -dc" - ECC part is not used to check memory corruption - only 1st FTrace log is displayed or saved Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> [trini: Minor updates for current design, correct spacing in rST] Signed-off-by: Tom Rini <trini@konsulko.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2020-10-14mmc: fsl_esdhc: add ADMA2 supportMichael Walle3-5/+67
Newer eSDHC controllers support ADMA2 descriptor tables which support 64bit DMA addresses. One notable user of addresses in the upper memory segment is the EFI loader. If support is enabled, but the controller doesn't support ADMA2, we will fall back to SDMA (and thus 32 bit DMA addresses only). Signed-off-by: Michael Walle <michael@walle.cc>
2020-10-14mmc: fsl_esdhc: replace most #ifdefs by IS_ENABLED()Michael Walle1-73/+65
Make the code cleaner and drop the old-style #ifdef constructs where it is possible. Signed-off-by: Michael Walle <michael@walle.cc>
2020-10-14arm: mvebu: Remove old comments from configs/mvebu_armada-37xx.h filePali Rohár1-7/+0
These comments are relict for old, now removed config options. So remove these obsoleted comments too. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-14arm64: dts: a3720: add support for espressobin with populated emmcAndre Heider3-2/+50
Import armada-3720-espressobin-emmc.dts from Linux, but use sdhc1 for emmc, since our dtsi is still based on downstream and sdhc0 is used for the sd card. Signed-off-by: Andre Heider <a.heider@gmail.com>
2020-10-14arm64: dts: armada-3720-espressobin: split common parts to .dtsiAndre Heider2-157/+174
Move most of the dts to the new common armada-3720-espressobin.dtsi file, just like Linux, but keep the current, downstream based, version. The dts itself is imported from Linux. Signed-off-by: Andre Heider <a.heider@gmail.com>
2020-10-14arm64: dts: armada-3720-espressobin: use Linux model/compatible stringsAndre Heider2-6/+6
Fix the actual board vendor and ease synching dts files from Linux. Signed-off-by: Andre Heider <a.heider@gmail.com> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-14spi: mvebu_a3700_spi: add support for cs-gpiosGeorge Hilliard1-6/+35
The device tree has a way to specify GPIO lines as chip selects. From the binding docs: So if for example the controller has 2 CS lines, and the cs-gpios property looks like this: cs-gpios = <&gpio1 0 0> <0> <&gpio1 1 0> <&gpio1 2 0>; Then it should be configured so that num_chipselect = 4 with the following mapping: cs0 : &gpio1 0 0 cs1 : native cs2 : &gpio1 1 0 cs3 : &gpio1 2 0 Add support for this, while retaining backward-compatibility with existing device trees; the driver will preserve existing behavior if a cs-gpios list is not given, or if a particular line is specified as <0> (native). This implementation is inspired by similar implementations in neighboring drivers for other platforms: atmega, mxc, etc. Signed-off-by: George Hilliard <ghilliar@amazon.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-14arm: mvebu: mvebu_armada-8k: Add support for initializing iEi Puzzle-M801 ↵Luka Kovacic1-1/+19
networking Add support for the marvell,armada8040-puzzle-m801 compatible string in the board/Marvell/mvebu_armada-8k/board.c file to initialize the networking on iEi Puzzle-M801 board (2x CP1 1 Gb ports). Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-14arm: mvebu: Initial iEi Puzzle-M801 supportLuka Kovacic4-0/+487
Add initial U-Boot support for the iEi Puzzle-M801 board based on the Marvell Armada 88F8040 SoC. Currently supported hardware: 1x USB 3.0 4x Gigabit Ethernet 2x SFP+ (with NXP PCA9555 and NXP PCA9544) 1x SATA 3.0 1x M.2 type B 1x RJ45 UART 1x SPI flash 1x EPSON RX8010 RTC Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-14net: Add NIC controller driver for OcteonTX2Suneel Garapati16-0/+4493
Adds support for Network Interface controllers found on OcteonTX2 SoC platforms. Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-10-14net: Add NIC controller driver for OcteonTXSuneel Garapati14-0/+6656
Adds support for Network Interface controllers found on OcteonTX SoC platforms. Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com>
2020-10-14mtd: nand: Add NAND controller driver for OcteonTXSuneel Garapati6-0/+2998
Adds support for NAND controllers found on OcteonTX or OcteonTX2 SoC platforms. Also includes driver to support Hardware ECC using BCH HW engine found on these platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2020-10-13Merge branch '2020-10-12-assorted-encryption-changes'Tom Rini11-36/+190
- Fix verified boot on BE targets - Add support for multiple required keys in verified boots - Add support for Initialization Vectors in AES keys in FIT images - Assorted fixes in the RSA code
generated by cgit v1.2.3 (git 2.39.0) at 2026-10-01 14:13:42 +0300