summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-10-22clk: ccf: replace the get_rate helperDario Binacchi1-25/+1
The 12d152620d commit fixed the get_rate helper because the set_parent one did not re-parent the clock device to the new parent. The 4d139f3838 commit allows you to remove this workaround by calling the clk_get_parent_rate routine. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2020-10-22doc: dfu: fix typo in README.dfuChance.Yang1-1/+1
Fix "ram" typos for serial flash Signed-off-by: Chance.Yang <chance.yang@vatics.com>
2020-10-22log: Tidy up documentationSimon Glass1-5/+8
Fix up the documentation which was lost in a merge conflict in the conversion to RST. Fixes: 52d3df7fefe ("log: Allow LOG_DEBUG to always enable log output") Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-22ARM: mvebu: a38x: Fix comment typoNaoki Hayama1-1/+1
%s/occured/occurred/ Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-22fs: btrfs: Fix typo in error messageNaoki Hayama1-2/+2
%s/occured/occurred/ Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Qu Wenruo <wqu@suse.com>
2020-10-22mmc: Fix comment typoNaoki Hayama1-1/+1
%s/occured/occurred/ Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
2020-10-22Remove default value of CONFIG_PREBOOT for CONFIG_USB_STORAGEPatrick Delaunay1-1/+1
Remove the default value "usb start" for CONFIG_USB_STORAGE as the USB storage boot initialization is correctly managed by distro boot command ('usb_boot' defined in include/config_distro_bootcmd.h already include the command 'usb start'). Fixes: 324d77998ed6 ("Define default CONFIG_PREBOOT with right config option") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22gpio: fix gpio_request_by_name() descriptionDario Binacchi1-1/+1
Replace 'dev->dev' with '@desc->dev' in the gpio_request_by_name function desc parameter description. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22dm: core: improve uclass_get_device_by_phandle_id() descriptionDario Binacchi1-1/+2
Complete the devp parameter description. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22km/common: change ubicopy variableHolger Brunck1-2/+1
Instead having a hard coded value for "cramfsaddr" after compile time, we change it to take the variable "cramfsaddr" for the ubicopy variable. This makes sure that ubicopy uses the right address, even when the value for "cramfsaddr" has changed. CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-10-22km: adapt defines and variables for new memory layoutHolger Brunck5-13/+11
Due to increasing kernel image sizes we get problems when decompressing the kernel image. To fix this we need to change the addresses where we load and where we extract the kernel. Also we need to adapt the address where to load the CRAMFS image and where to load the DTB file. While at it also harmonize all boards for PPC and ARM to have the same values. Also we add a new variable "env_version", so that the userspace is able to detect if this is a u-boot binary with updated values or not. CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Remove old values from kmp204x.h] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-22lib: print_freq() should output kHz not KHzHeinrich Schuchardt2-2/+2
In the International System of Units (SI) the prefix kilo is abbreviated as 'k' not 'K'. 'K' is the symbol for Kelvin. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-22IPQ40xx: Add PRNG supportRobert Marko2-0/+11
Since we now have the driver for Qualcomm PRNG HW, lets use it and add the necessary clocks and nodes. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-22rng: Add Qualcomm MSM PRNG driverRobert Marko4-0/+152
Add support for the hardware pseudo random number generator found in Qualcomm SoC-s. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-22IPQ40xx: Add support for MDIORobert Marko2-0/+32
Lets add the necessary DTS node and pinctrl properties for newly added MDIO driver. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-22net: Add IPQ40xx MDIO driverRobert Marko4-0/+155
This adds the driver for the IPQ40xx built-in MDIO. This will be needed to support future PHY driver. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-22IPQ40xx: Add SPI supportRobert Marko3-2/+30
Since we have SPI driver for IPQ40xx QUP SPI controller, lets add the necessary nodes, pinctrl and clocks. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-22spi: Add Qualcomm QUP SPI controller driverRobert Marko5-0/+848
This patch adds support for the Qualcomm QUP SPI controller that is commonly found in most of Qualcomm SoC-s. Driver currently supports v1.1.1, v2.1.1 and v2.2.1 HW. FIFO and Block modes are supported, no support for DMA mode is planned. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-10-22tools: image-host.c: use correct output formatHeinrich Schuchardt1-4/+4
When building on a 32bit host the following warning occurs: tools/image-host.c: In function ‘fit_image_read_data’: tools/image-host.c:296:56: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘__off64_t’ {aka ‘long long int’} [-Wformat=] printf("File %s don't have the expected size (size=%ld, expected=%d)\n", ~~^ %lld filename, sbuf.st_size, expected_size); ~~~~~~~~~~~~ tools/image-host.c:311:62: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘__off64_t’ {aka ‘long long int’} [-Wformat=] printf("Can't read all file %s (read %zd bytes, expexted %ld)\n", ~~^ %lld filename, n, sbuf.st_size); ~~~~~~~~~~~~ Fix the format strings. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22km: fix license string and compatible stringsHolger Brunck22-32/+32
As the ownership is now Hitachi Power Grids, change the license string and adapt the compatible string in DTS files. For kmeter1.dts we change it to "keymile,KMETER1" for now, as this is then compliant with what is submitted to the linux kernel. All other boards don't have a upstreamed version in linux mainline. Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> CC: Heiko Schocher <hs@denx.de> CC: Marek Vasut <marex@denx.de> CC: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-10-22README: Convert HTTP links to HTTPSNaoki Hayama1-10/+10
Convert all the other http:// links to https:// . www.denx.de/twiki/ seems to move to www.denx.de/wiki/ , so change it. I checked all links in this patch are valid. Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
2020-10-22README: vxworks: Fix typo overwrideNaoki Hayama1-1/+1
%s/overwride/override/ Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
2020-10-22README: sandbox: Change reference to sandbox detailsNaoki Hayama1-1/+1
doc/arch/index.rst is a list of links to each architecture. As for the sandbox details, doc/arch/sandbox.rst looks better. Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22README: Update directory hierarchyNaoki Hayama1-1/+2
Removed: - /arch/openrisc Added: - /arch/xtensa - /env Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
2020-10-22README: Update source code locationNaoki Hayama1-8/+6
This patch include these updates - Git repository has moved to GitLab - HTTPS access to the file server is allowed - pre-built images are no longer available Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
2020-10-22README: Update links to mailing list archivesNaoki Hayama1-3/+2
This patch includes these updates - Change http://lists.denx.de/pipermail/u-boot to https://lists.denx.de/pipermail/u-boot - http://dir.gmane.org/gmane.comp.boot-loaders.u-boot is broken, so remove it - Another archive https://marc.info/?l=u-boot is available, so add it Additional information: dir.gmane.org has moved to news.gmane.io, but it only allows access to the archive via NNTP. - Server: news.gmane.io - Group : gmane.comp.boot-loaders.u-boot I don't include this information in this patch because it's not very useful without web interfaces. Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp>
2020-10-22timer: Return count from timer_ops.get_countSean Anderson24-97/+59
No timer drivers return an error from get_count. Instead of possibly returning an error, just return the count directly. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22doc: Document timer APISean Anderson3-22/+33
This adds kerneldocs for <timer.h>. I don't know who should maintain doc/api/timer.rst, since the timer subsystem seems to be maintained by SoC maintainers. MAINTAINERS is left un-updated for the moment. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22common: rename getc() to getchar()Heinrich Schuchardt17-58/+58
The sandbox is built with the SDL2 library with invokes the X11 library which in turn calls getc(). But getc() in glibc is defined as int getc(FILE *) This does not match our definition. int getc(void) The sandbox crashes when called with parameter -l. Rename our library symbol getc() to getchar(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22cli_hush.c: remove broken sanity checkRasmus Villemoes1-8/+0
This code is intended do prevent one from setting a shell variable abc by doing abc=123 if an environment variable named abc already exists. However, the check is broken, since the env_get is done before the split on =, so we look up whether an environment variable "abc=123" exists, which is obviously never the case. One could move the code to below the split on =, but instead, just remove it, saving a little .text: The check has never worked as intended (it goes all the way back to the initial git commit), and it would anyway not guard against one first setting the shell variable, then doing 'env set abc xyz'. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-10-22common, autoboot: sync functionality with Kconfig descriptionHeiko Schocher1-1/+2
add back again special case: -2 autoboot with no delay and no check for abort as described in Kconfig option, see common/Kconfig help text for option BOOTDELAY. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22cosmetic: image: Fix comments and the order of definitionsNaoki Hayama2-10/+11
Fix some comments about functions. Move genimg_get_comp_name() above genimg_get_short_name() because genimg_get_comp_name() is related to get_table_entry_name(). Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22mkimage: Skip adding non-existent IDs to a listNaoki Hayama1-2/+7
In show_valid_options(), this patch introduces checking whether a category has an entry ID. If not, adding it to a list for output is skipped before calling qsort(). This patch will affect all kinds of image header categories (-A, -C, -O and -T flags). Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22image: Add a function to modify category informationNaoki Hayama2-0/+27
Add a generic function which can check whether a category has an entry ID. Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22Kconfig: Use hex values for CONFIG_{SPL,TPL}_SIZE_LIMITOvidiu Panait6-10/+10
CONFIG_{SPL,TPL}_SIZE_LIMIT are defined as hex (SPL_SIZE_LIMIT was converted in b51882d0 ("spl: Convert CONFIG_SPL_SIZE_LIMIT to hex"), but there are still places that reference integer values. Change those to hex as well. Also, update the Makefile to check for 0x0 instead of 0. This also fixes the following build error when CONFIG_SPL_SIZE_LIMIT is set by menuconfig to 0x0: ... spl/u-boot-spl.bin exceeds file size limit: limit: 0 bytes actual: 0x80f0 bytes excess: 0x80f0 bytes Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-22tpm: cr50: Correct logging statementsSimon Glass1-5/+5
Fix up some logging statements in this file. Most of them should use log_debug(), apart from one error. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-22i2c: designware: Use log_debug() for debuggingSimon Glass1-2/+2
We don't want the debug output to be visible in a normal boot. Silence it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher<hs@denx.de>
2020-10-22board: Show memory for frame buffersSimon Glass1-0/+2
When debugging is enabled, show the memory allocated to video frame buffers. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-22bloblist: Place on a 4KB boundarySimon Glass1-1/+3
It is much easier to read the bloblist addresses if it starts on a 4KB boundary. Update it to align it accordingly. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-22syscon: Drop the logging in syscon_get_by_driver_data()Simon Glass1-1/+1
This function can be called when it is not known whether it will find anything. This results in confusing log messages if the device is not found. It is better for the caller to log the failure, if necessary. Drop the logging from this function. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-22log: Add missing category namesSimon Glass2-1/+8
Add some category names that were missed in recent changes. Update the comment as a reminder. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-22Merge tag 'u-boot-stm32-20201021' of ↵Tom Rini13-101/+66
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Activate CMD_EXPORTENV/CMD_IMPORTENV/CMD_ELF for STM32MP15 defconfig - Fix stm32prog command: parsing of FlashLayout without partition - Update MAINTAINERS for ARM STM STM32MP - Manage eth1addr on dh board with KS8851 - Limit size of cacheable DDR in pre-reloc stage in stm32mp1 - Use mmc_of_parse() to read host capabilities in mmc:sdmmc2 driver
2020-10-22Merge branch '2021.01-rc' of https://github.com/lftan/u-bootTom Rini1-2/+2
- fix Gen5 enable of EMAC via FPGA
2020-10-22samsung: common: remove the duplicated stdio print messageJaehoon Chung1-1/+0
Remove duplicated stdio print message. It's already displayed in common/console.c. Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Odroid XU3/XU4/HC1/HC2 based on Exynos5422 Type: xu3 In: serial Out: serial Err: serial Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-10-22sun50i: a64: A64-Teres-I board detect builtin keyboardJonas Smedegaard1-0/+1
A64-Teres-I board is a laptop which comes with a builtin keyboard. The keyboard+trackpad controller pauses for 2 seconds at a firmware prompt before loading its HID interface. U-Boot needs to wait equally long to reliably enable the keyboard. Signed-off-by: Jonas Smedegaard <dr@jones.dk> Reviewed-by: Tom Rini <trini@konsulko.com> Series-Cc: Jagan Teki <jagan@amarulasolutions.com> Series-Cc: Lukasz Majewski <lukma@denx.de> Series-Cc: Andre Przywara <andre.przywara@arm.com>
2020-10-22sunxi: Enable ethernet on newer Olimex OLinuXino-A20-Lime2-eMMCJonas Smedegaard1-0/+2
Olimex OLinuXino LIME2 rev. H through L uses Micrel KSZ9031 PHY. This enables the Micrel PHY for A20-OLinuXino-Lime2-eMMC_defconfig. Signed-off-by: Jonas Smedegaard <dr@jones.dk> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22sunxi: binman: Add support for including SCP firmwareSamuel Holland3-8/+60
Allwinner sun50i SoCs contain an OpenRISC 1000 CPU that functions as a System Control Processor, or SCP. ARM Trusted Firmware (ATF) communicates with the SCP over SCPI to implement the PSCI system suspend, shutdown and reset functionality. Currently, SCP firmware is optional; the system will boot and run without it, but system suspend will be unavailable. Since all communication with the SCP is mediated by ATF, the only thing U-Boot needs to do is load the firmware into SRAM. The SCP firmware occupies the last 16KiB of SRAM A2, immediately following ATF. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22binman: Add support for SCP firmwareSamuel Holland4-0/+43
Add an entry type for a firmware blob for a System Control Processor, given by an entry arg. This firmware is a raw binary blob. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22sunxi: binman: Update FIT component descriptionsSamuel Holland3-6/+8
Since commit d879616e9e64 ("spl: fit: simplify logic for FDT loading for non-OS boots"), the SPL looks at the "os" properties of FIT images to determine where to append the FDT. The "os" property of the "firmware" image also determines how to execute the next stage of the boot process, as in 1d3790905d9c ("spl: atf: introduce spl_invoke_atf and make bl31_entry private"). For this reason, the next stage must be specified in "firmware", not in "loadables". To support this additional functionality, and to properly model the boot process, where ATF runs before U-Boot, add the "os" properties and swap the firmware/loadable images in the FIT image. Since this description was copied as an example in commit 70248d6a2916 ("binman: Support generating FITs with multiple dtbs"), update those examples as well for correctness and consistency. Acked-by: Patrick Wildt <patrick@blueri.se> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22spl: fit: Minimally parse OS properties with FIT_IMAGE_TINYSamuel Holland2-4/+17
Some boards, specifically 64-bit Allwinner boards (sun50i), are extremely limited on SPL size. One strategy that was used to make space was to remove the FIT "os" property parsing code, because it uses a rather large lookup table. However, this forces the legacy FIT parsing code path, which requires the "firmware" entry in the FIT to reference the U-Boot binary, even if U-Boot is not the next binary in the boot sequence (for example, on sun50i boards, ATF is run first). This prevents the same FIT image from being used with a SPL with CONFIG_SPL_FIT_IMAGE_TINY=n and CONFIG_SPL_ATF=y, because the boot method selection code looks at `spl_image.os`, which is only set from the "firmware" entry's "os" property. To be able to use CONFIG_SPL_ATF=y, the "firmware" entry in the FIT must be ATF, and U-Boot must be a loadable. For this to work, we need to parse the "os" property just enough to tell U-Boot from other images, so we can find it in the loadables list to append the FDT, and so we don't try to append the FDT to ATF (which could clobber adjacent firmware). So add the minimal code necessary to distinguish U-Boot/non-U-Boot loadables with CONFIG_SPL_FIT_IMAGE_TINY=y. This adds about 300 bytes, much less than the 7400 bytes added by CONFIG_SPL_FIT_IMAGE_TINY=n. Acked-by: Patrick Wildt <patrick@blueri.se> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit v1.2.3 (git 2.39.0) at 2026-10-01 12:47:55 +0300