summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-06-10Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini5-5/+190
- mvebu: Turris MOX misc updates (cmds, rescue mode, LED's etc) (Marek) - mvebu: correct Armada 8K addresses (Heinrich)
2021-06-10arm64: mvebu: correct Armada 8K addressesHeinrich Schuchardt1-5/+5
0x04000000- 0x06000000 is reserved memory. We cannot load to anything here. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-10arm: mvebu: turris_mox: enable options for Turris network bootMarek Behún1-0/+8
Enable configuration options to support Turris network boot. This includes FIT support and some crypto commands. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-10arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitionsMarek Behún1-0/+31
Add nodes for SPI NOR partitions to the device tree of Turris MOX, as are in Linux' device tree. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-10arm: mvebu: configs: turris_mox: add fdtfile default env variableMarek Behún1-0/+1
Add default fdtfile environment variable with value marvell/armada-3720-turris-mox.dtb. This can be useful for some boot scenarios. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-10arm: mvebu: turris_mox: start blinking PHY LEDs when entering rescueMarek Behún1-0/+35
Configure blinking on ethernet PHY LEDs on the MOX A board when entering rescue mode via reset button. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-10arm: mvebu: turris_mox: add support for board rescue modeMarek Behún3-0/+86
Add necessary config options and board code to support board factory reset / rescue mode on Turris MOX. In order to also support invoking rescue mode from U-Boot console, without having to press the factory reset button, put the rescue command into `bootcmd_rescue` default environment variable. When factory reset button is pressed, invoke rescue mode via distroboot by setting `boot_targets` to `rescue`. Rescue boot from console can be invoked by running run bootcmd_rescue Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-10arm: mvebu: dts: turris_mox: add button and LED nodesMarek Behún1-0/+24
Add nodes for indicator LED and reset button so that board code can implement board factory reset mechanism. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-10fs/squashfs: fix reading of fragmented filesJoao Marcos Costa1-10/+6
The fragmented files were not correctly read because of two issues: - The squashfs_file_info struct has a field named 'comp', which tells if the file's fragment is compressed or not. This field was always set to 'true' in sqfs_get_regfile_info and sqfs_get_lregfile_info. It should actually take sqfs_frag_lookup's return value. This patch addresses these two assignments. - In sqfs_read, the fragments (compressed or not) were copied to the output buffer through a for loop which was reading data at the wrong offset. Replace these loops by equivalent calls to memcpy, with the right parameters. I tested this patch by comparing the MD5 checksum of a few fragmented files with the respective md5sum output in sandbox, considering both compressed and uncompressed fragments. Signed-off-by: Joao Marcos Costa <jmcosta944@gmail.com> Tested-by: Richard Genoud <richard.genoud@posteo.net> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
2021-06-09rtc: davinci: fix date loaded on resetDario Binacchi1-0/+10
On reset, the RTC loads the 2000-01-01 date with a wrong day of the week (Sunday instead of Saturday). Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210602203805.11494-9-dariobin@libero.it
2021-06-09rtc: davinci: add driver model supportDario Binacchi1-61/+367
Update the driver to support the device tree and the driver model. The read / write helpers in rtc_ops allow access to scratch registers only. The offset parameter is added to the address of the scratch0 register. Support for non-DM has been removed as there were no users. Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210602203805.11494-8-dariobin@libero.it
2021-06-09arm: dts: sync rtc node of am335x boards with Linux 5.9-rc7Dario Binacchi4-0/+21
There have been some changes to the am335x-<board> DTs related to the rtc node, so let's re-syncs them with Linux. Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210602203805.11494-7-dariobin@libero.it
2021-06-09rtc: davinci: use unlock/lock mechanismDario Binacchi1-0/+14
The RTC module contains a kicker mechanism to prevent any spurious writes from changing the register values. To set the time, you must first unlock the TC registers, update them and then lock. Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210602203805.11494-6-dariobin@libero.it
2021-06-09rtc: davinci: check BUSY bit before set TC registersDario Binacchi1-9/+36
To write correct data to the TC registers, the STATUS register must be read until the BUSY bit is equal to zero. Once the BUSY flag is zero, there is a 15 μs access period in which the TC registers can be programmed. The rtc_wait_not_busy() has been inspired by the Kernel. Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210602203805.11494-5-dariobin@libero.it
2021-06-09rtc: davinci: replace 32bit access with 8bit accessDario Binacchi1-16/+16
Use 32-bit access only where it is needed. Most of the RTC registers contain useful information in the 8 least significant bits, the others are reserved. Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210602203805.11494-4-dariobin@libero.it
2021-06-09rtc: davinci: fix compiler errorsDario Binacchi1-3/+8
Fix errors raised by module compilation. Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210602203805.11494-3-dariobin@libero.it
2021-06-09rtc: davinci: enable compilation for omap architecturesDario Binacchi1-0/+7
The Davinci's onchip RTC is also present on TI OMAP1, AM33XX, AM43XX and DRA7XX SOCs. So, let's enable compilation for these architectures too. Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210602203805.11494-2-dariobin@libero.it
2021-06-09Nokia RX-51: Enable CONFIG_WDT to remove deprecation warningPali Rohár3-7/+35
Also convert CONFIG_HW_WATCHDOG to CONFIG_WATCHDOG. Signed-off-by: Pali Roh?r <pali@kernel.org> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210309201915.16586-1-pali@kernel.org
2021-06-09configs: am64: Enable configs to support USB host and device modesAswath Govindraju3-3/+84
Enable config options required to add support for USB Mass storage boot, USB DFU boot, host and device modes in U-Boot. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210604163043.12811-11-a-govindraju@ti.com
2021-06-09arm: dts: k3-am64-main: Update the location of ATF in SRAM and increase its ↵Aswath Govindraju1-1/+1
max size Due to a limitation for USB DFU boot mode, SPL load address has to be less than or equal to 0x70001000. So, load address of SPL and ATF have been moved to 0x70000000 and 0x701a0000 respectively. Also, the maximum size of ATF has been increased to 0x1c000 [1]. Therefore, update ATF's location and maximum size accordingly in the device tree file. [1] - https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=2fb5312f61a7de8b7a70e1639199c4f14a10b6f9 Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210604163043.12811-10-a-govindraju@ti.com
2021-06-09configs: am64x_evm_*_defconfig: Rearrange the components in SRAM to satisfy ↵Aswath Govindraju4-6/+6
the limitations for USB DFU boot mode For USB DFU boot mode there is a limitation on the load address of boot images that they have to be less than 0x70001000. Therefore, move the SPL_TEXT_BASE address to 0x70000000. Currently ATF is being loaded at 0x70000000, if the SPL is being loaded at 0x70000000 then ATF would overwrite SPL image when loaded. Therefore, move the location of ATF to a latter location in SRAM, past the SPL image. Also rearrange the EEPROM and BSS data on top of ATF. Given below is the placement of various data sections in SRAM ┌──────────────────────────────────────┐0x70000000 │ │ │ │ │ │ │ SPL IMAGE (Max size 1.5 MB) │ │ │ │ │ │ │ ├──────────────────────────────────────┤0x7017FFFF │ │ │ SPL STACK │ │ │ ├──────────────────────────────────────┤0x70192727 │ GLOBAL DATA(216 B) │ ├──────────────────────────────────────┤0x701927FF │ │ │ INITIAL HEAP (32 KB) │ │ │ ├──────────────────────────────────────┤0x7019A7FF │ │ │ BSS (20 KB) │ ├──────────────────────────────────────┤0x7019F7FF │ EEPROM DATA (2 KB) │ ├──────────────────────────────────────┤0x7019FFFF │ │ │ │ │ ATF (123 KB) │ │ │ │ │ ├──────────────────────────────────────┤0x701BEBFB │ BOOT PARAMETER INDEX TABLE (5124 B)│ ├──────────────────────────────────────┤0x701BFFFF │ │ │SYSFW FIREWALLED DUE TO A BUG (128 KB)│ │ │ ├──────────────────────────────────────┤0x701DFFFF │ │ │ DMSC CODE AREA (128 KB) │ │ │ └──────────────────────────────────────┘0x701FFFFF Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210604163043.12811-9-a-govindraju@ti.com
2021-06-09arm: dts: k3-am642-evm-u-boot: Add U-Boot tags and fix the dr_mode to ↵Aswath Govindraju1-0/+13
peripheral for USB subsystem Add U-Boot tags and fix the dr_mode as peripheral in U-Boot to support DFU by default. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210604163043.12811-8-a-govindraju@ti.com
2021-06-09arm: dts: k3-am642-*-evm: Add USB supportAswath Govindraju2-0/+36
AM64 EVM board has a micro USB 2.0 AB connector and the USB0_VBUS is connected with a resistor divider in between. USB0_DRVVBUS pin is muxed between USB0_DRVVBUS and GPIO1_79 signals. Add the corresponding properties and set the pinmux mode for USB subsystem in the evm dts file. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210604163043.12811-7-a-govindraju@ti.com
2021-06-09arm: dts: k3-am64-main: Add USB DT nodesAswath Govindraju1-0/+30
Add DT node for the single USB subsystem in main dtsi file. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210604163043.12811-6-a-govindraju@ti.com
2021-06-09board: ti: am64x: Set the core voltage of USB PHY to 0.85VAswath Govindraju1-0/+14
Set the core voltage of USB PHY in AM64x to 0.85V in spl_board_init(). Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210604163043.12811-5-a-govindraju@ti.com
2021-06-09arm: mach-k3: am642_init: Do USB fixups to facilitate host and device boot modesAswath Govindraju1-0/+33
U-Boot either supports USB host or device mode for a node at a time in the device tree nodes. To support both host and dfu bootmodes, dr_mode is set to "peripheral" by default and then fixed based on the mode selected by the boot mode config dip switches on the board. This needs to happen before the cdns3 generic layer binds the usb device to a host or a device driver. Therefore, use fdtdec_setup_board() implementation to fixup the device tree property. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210604163043.12811-4-a-govindraju@ti.com
2021-06-09arm: mach-k3: am642_init: Add support for USB boot modeAswath Govindraju3-4/+20
Add support for identifying USB host and device boot modes Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210604163043.12811-3-a-govindraju@ti.com
2021-06-09tools: k3_fit_atf: Add support for providing ATF load address using a ↵Aswath Govindraju3-3/+14
Kconfig symbol Add support for providing ATF load address with a Kconfig symbol. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Suman Anna <s-anna@ti.com> Link: https://lore.kernel.org/r/20210604163043.12811-2-a-govindraju@ti.com
2021-06-09arm: dts: k3-j7200: ddr: Update to 0.5.0 version of DDR for LPDDR 2666MTsKevin Scholz2-219/+220
Update the ddr settings to use the DDR reg config tool rev 0.5.0. This enables 2666MTs LPDDR configuration on J7200. Signed-off-by: Kevin Scholz <k-scholz@ti.com> Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Suman Anna <s-anna@ti.com> Link: https://lore.kernel.org/r/20210603131453.11414-1-praneeth@ti.com
2021-06-09Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini2-2/+9
- dwc2 and cdns3 fixes
2021-06-09Merge tag 'efi-2021-07-rc5' of ↵Tom Rini8-9/+167
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-07-rc5 Documentation: * pinmux and ums man-page Bug fixes: * Consider that partition numbers as hexadecimal. * Avoid a possible NULL dereference in efi_capsule_delete_file().
2021-06-09Merge branch '2021-06-08-kconfig-migrations' into nextTom Rini140-74/+152
- Migrate TFTP_SIZE and SYS_DFU_DATA_BUF_SIZE to Kconfig
2021-06-09mx7d: Add Storopack's SMEGW01 boardFabio Estevam10-2/+545
Add support for Storopack's SMEGW01 board, which is an IoT gateway based on the i.MX7D SoC. Based on the original U-Boot work done by Phytec. Signed-off-by: Fabio Estevam <festevam@denx.de>
2021-06-09imx8mn: configs: add support for distro boot commandsAndrey Zhizhikin3-54/+16
Supported boot device types in iMX8MN: MMC, DHCP. Add DISTRO_DEFAULTS config option and include the distro boot command header file to enable full support of distro boot on i.MX8M Nano EVK (both DDR and LPDDR derivatives). Drop previous environment, which was targeting customized boot commands and boot order. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-06-09imx: Add SeeedStudio NPI-IMX6ULL SupportNavin Sankar Velliangiri14-0/+908
CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 49C Reset cause: POR Model: Seeed NPi iMX6ULL Dev Board with NAND Board: Seeed NPi i.MX6ULL Dev Board DRAM: 512 MiB NAND: 512 MiB MMC: FSL_SDHC: 0 In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Net: FEC0 Working: - Eth0 - MMC/SD - NAND - UART 1 - USB host Signed-off-by: Navin Sankar Velliangiri <navin@linumiz.com> Note: Changes in v2: * removed unnecessary space in imx6ull-seeed-npi-imx6ull-dev-board.dts file. * Used SZ_2M for CONFIG_SYS_MALLOC_LEN size allocation.
2021-06-09imx: support for conga-QMX8 boardOliver Graute17-0/+1469
Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2021-06-09arm: imx: imx8mm: correct unrecognized fracpll frequencyAndrey Zhizhikin1-1/+1
Frequency requested by ddrphy_init_set_dfi_clk from fracpll uses MHZ() macro, which expands the value provided to the Hz range without taking into account the precise Hz setting. This causes the frequency of 266 MHz not ot be found in the imx8mm_fracpll_tbl, since it is entered there with a precise Hz value. This in turn causes the boot hang in SPL, as proper DDR fracpll frequency cannot be determined. Correct the value in imx8mm_fracpll_tbl to match the one expanded by MHZ(266) macro, rounding it down to MHz range only. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Fixes: 825ab6b406 ("driver: ddr: Refine the ddr init driver on imx8m") Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-06-09pico-imx6: README: Fix the boot mode settings URLFabio Estevam1-1/+1
The original URL that explains the boot mode setting is no longer valid. Update to the new one. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2021-06-09imx: ventana: enable dm support for PCI and FEC ethernetTim Harvey17-94/+61
Enable driver model support for FEC ethernet which allows us to remove the iomux and board_eth_init function. Replace the toggling of the ethernet phy reset with dt configuration. Enable driver model support for PCI which allows us to remove the eth1000_initialize() call. Additionally enable PCI_INIT_R to scan for PCI devices on init such as the e1000 that is present on the GW552x. Convert board_pci_fixup to use dm callback and remove pcidisable env variable which is not supported for DM_PCI and thus leave PCI always enabled during init. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2021-06-09arm: imx: imx8mm: clock: make debug output more descriptiveAndrey Zhizhikin1-3/+3
Clock initialization functionality has ambitious debug messages, which are printed out when failures are triggered during execution: - Separate frequency table lookup functions have the the same output that makes it impossible to understand which function failed and produced the output - PLL decoding routine has a generic debug statement printed, which does not state the actual value failed to be found Extend the output for both cases with prefixing table lookup functions output with function name, and report the failed value in PLL decoding routine. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-06-09Add EV-iMX280-NANO-X-MB boardOleh Kravchenko6-10/+224
A simple prototyping board with one microSD port, one Ethernet port, 2 USB ports, I2C, SPI, GPIO, and UART interfaces. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Stefano Babic <sbabic@denx.de>
2021-06-09Add out4.ru O4-iMX-NANO boardOleh Kravchenko12-0/+819
Board designed for quick prototyping and has one microSD port, 2 Ethernet ports, 2 USB ports, I2C, SPI, CAN, RS-485, GPIO, UART interfaces, and 2 RGB LEDs. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Stefano Babic <sbabic@denx.de>
2021-06-09ARM: imx8m: verdin-imx8mm: Increase bootm size to 64 MiBMarek Vasut1-0/+2
Uncompressed aarch64 kernel Image are rather large, increase the bootm size limit to 64 MiB to cater for that. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Max Krummenacher <max.krummenacher@toradex.com> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2021-06-09configs: imxrt1050-evk: enable host usb support and its commandGiulio Benetti1-1/+6
Now that usb host is supported let's enable it on this board. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09ARM: dts: imxrt1050-evk: enable usbotg1 node as hostGiulio Benetti1-0/+5
Enable usbotg1 port node as host usb. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09ARM: dts: imxrt1050: add usbotg1, usbphy1 and usbmisc nodesGiulio Benetti1-0/+27
Usb is now supported so add all required nodes for it in imxrt1050. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09usb: ehci-mx6: add support for i.MXRTGiulio Benetti3-7/+12
Add support for usb1 and usb2 present on i.IMXRT. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09clk: imx: clk-imxrt1050: introduce IMXRT1050_CLK_USBOH3Giulio Benetti2-1/+4
Usb needs IMXRT1050_CLK_USBOH3 clock to be enabled, so let's add it to clock driver. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09ARM: IMXRT: introduce is_imxrt*() macros and get_cpu_rev()Giulio Benetti3-0/+19
We need those macros to instruct drivers on how to behave for SoC specific quirks, so let's add it as done for other i.MX SoCs. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-06-09ARM: dts: imxrt1020: add gpio5 node to this SoCGiulio Benetti1-0/+11
i.MXRT1020 supports gpio5, so let's add a node for it. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-22 17:46:02 +0300