summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-06-21imx8mp: configs: enable distro default featuresAndrey Zhizhikin1-2/+1
imx8mp ekv has been switched to use distro boot commands, but had no correct options enabled to support sysboot. According to the README.distro, sysboot is consindered to be a recommended way of using distro boot commands, it required default distro features to be enabled instead of only those that are relevant to the boot script. Replace the boot script specific options in the config to a default distro option. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Peng Fan <peng.fan@nxp.com> Fixes: 9b162b1d1f ("imx8mp: configs: add support for distro boot commands") Reviewed-by: Fabio Estevam <festevam@gmail.com>
2021-06-21o4-imx-nano: Fix dtc warningsFabio Estevam1-12/+6
Remove the LED unit addresses and reg properties to fix the following dtc build warnings: arch/arm/dts/o4-imx-nano.dtb: Warning (reg_format): /leds/led@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) ... arch/arm/dts/o4-imx-nano.dtb: Warning (avoid_default_addr_size): /leds/led@0: Relying on default #address-cells value Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Oleh Kravchenko <oleg@kaa.org.ua>
2021-06-19Merge tag 'u-boot-rockchip-20210618' of ↵Tom Rini39-9/+10837
https://source.denx.de/u-boot/custodians/u-boot-rockchip into next - New SoC platform support: rk3568; - rockchip pcie Code compile issue fix; - Board fix for rk3399 Khadas Edge; - Add Rockchip NFC driver;
2021-06-18Merge tag 'u-boot-stm32-20210618' of ↵Tom Rini14-200/+159
https://source.denx.de/u-boot/custodians/u-boot-stm into next - stm32mp157c-odyssey-som DT fixes - stm32_qspi: Fix short data write operation - dfu: set max_buf_size to erasesize also for NOR devices - Fixes ethernet clock property name for STM32MP1 board - STM32CubeProgrammer: various fixes - clk: cosmetic update for clk-uclass
2021-06-18Merge branch 'network_master' of ↵Tom Rini15-51/+1207
https://source.denx.de/u-boot/custodians/u-boot-net
2021-06-18net: octeontx: smi: use dt live tree APITim Harvey1-13/+11
clean up octeontx_smi_probe by using the live-tree API. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-06-18cmd: pxe_utils: sysboot: fix crash if either board or soc are not set.Dimitri John Ledkov1-0/+8
If the environment does not have "soc" or "board" set, and fdtdir option is specified in extlinux.conf, the bootloader will crash whilst dereferencing a null pointer. Add a guard against null soc or board. Fixes a crash of qemu-riscv64_smode configuration, which does not have CONFIG_SYS_SOC defined. Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-06-18net: use the same alias stem for ethernet as linuxMichael Walle5-15/+15
Linux uses the prefix "ethernet" whereas u-boot uses "eth". This is from the linux tree: $ grep "eth[0-9].*=.*&" arch/**/*dts{,i}|wc -l 0 $ grep "ethernet[0-9].*=.*&" arch/**/*dts{,i}|wc -l 633 In u-boot device trees both prefixes are used. Until recently the only user of the ethernet alias was the sandbox test device tree. This changed with commit fc054d563bfb ("net: Introduce DSA class for Ethernet switches"). There, the MAC addresses are inherited based on the devices sequence IDs which is in turn given by the device tree. Before there are more users in u-boot and both worlds will differ even more, rename the alias prefix to "ethernet" to match the linux ones. Also adapt the test cases and rename any old aliases in the u-boot device trees. Cc: David Wu <david.wu@rock-chips.com> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-06-18net: use a more deterministic approach to get the active ethernet deviceMichael Walle1-5/+12
If the environment variable "ethact" is not set, the first device in the uclass is returned. This depends on the probing order of the ethernet devices. Moreover it is not not configurable at all. Try to return the ethernet device with sequence id 0 first which then can be configured by the aliases in a device tree. Fall back to the old mechanism in case of an error. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-06-18net: sun8i-emac: fix MDIO frequencyHeinrich Schuchardt1-2/+6
Commit 4f0278dac56a ("net: sun8i-emac: Lower MDIO frequency") leads to network failure on the OrangePi PC. => dhcp sun8i_emac_eth_start: Timeout According to the commit message the change of the MDIO frequency is only required for external PHYs. Fixes: 4f0278dac56a ("net: sun8i-emac: Lower MDIO frequency") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-06-18net: synquacer: Add netsec driverJassi Brar3-0/+1143
Add SynQuacer's NETSEC GbE controller driver. Since this driver will load the firmware from SPI NOR flash, this depends on CONFIG_SYNQUACER_SPI=y. Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-06-18net: dwc_eth_qos: Revert some changes of commit 3a97da12ee7bDaniil Stas1-12/+1
Revert some changes of commit 3a97da12ee7b ("net: dwc_eth_qos: add dwc eqos for imx support") that were probably added by mistake. One of these changes can lead to received data corruption (enabling FUP and FEP bits). Another causes invalid register rxq_ctrl0 settings for some platforms. And another makes some writes at unknown memory location. Fixes: 3a97da12ee7b ("net: dwc_eth_qos: add dwc eqos for imx support") Signed-off-by: Daniil Stas <daniil.stas@posteo.net> Cc: Ye Li <ye.li@nxp.com> Cc: Fugang Duan <fugang.duan@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-06-18net: dwc_eth_qos: Fix needless phy auto-negotiation restartsDaniil Stas1-3/+3
Disabling clk_ck clock leads to link up status loss in phy, which leads to auto-negotiation restart before each network command execution. This issue is especially big for PXE boot protocol because of auto-negotiation restarts before each configuration filename trial. To avoid this issue don't disable clk_ck clock after it was enabled. Signed-off-by: Daniil Stas <daniil.stas@posteo.net> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-06-18net: e1000: do not attempt to set hwaddr for i210 without FLASHTim Harvey2-0/+5
commit f1bcad22dd19 ("net: e1000: add support for writing to EEPROM") adds support for storing hwaddr in EEPROM however i210 devices do not support this and thus results in errors such as: Warning: e1000#0 failed to set MAC address' Check if a flash device is present and if not return -ENOSYS indicating this is not supported. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-06-18Fix a memory leak issue in the RX port initialization.Hou Zhiqiang1-1/+3
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-06-18clk: cosmetic change in uclassPatrick Delaunay1-1/+1
Remove the tab in clk_get_bulk to respect the coding rules. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18stm32mp: stm32prog: handle dfu errorPatrick Delaunay1-0/+14
Handle DFU stack error in STM32CubeProgrammer protocol. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18dfu: add error callbackPatrick Delaunay2-0/+23
Add error callback in dfu stack to manage some board specific behavior on DFU targets. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18stm32mp: stm32prog: change one message level to debugPatrick Delaunay1-1/+1
Move the message "Invalid or missing layout file." to debug level as it is a normal behavior and not an error and add the missing '\n'. This patch avoids the strange trace : Boot over usb0! Invalid or missing layout file.DFU alt info setting: done Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18stm32mp: stm32prog: use get_cpu_dev for GetID commandPatrick Delaunay1-4/+6
Use get_cpu_dev() in uart getID command and remove the defines DEVICE_ID_BYTE1 and 2 defines. This patch prepare the support for new SOC family. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18stm32mp: stm32prog: correctly handle DM_PMICPatrick Delaunay1-1/+4
Correctly handle number of alternate when DM_PMIC is not activated. This patch remove the last UNKNOWN partition in this case. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-06-18stm32mp: stm32prog: handle the next phase after USB re-enumerationPatrick Delaunay1-5/+2
Handle the second USB enumeration only when the flashlayout is received and when phase is PHASE_FLASHLAYOUT. This patch removes the call of stm32prog_next_phase as it is already done in stm32prog_dfu_init(). Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18stm32mp: stm32prog: solve compilation with CONFIG_FIT_SIGNATUREPatrick Delaunay1-0/+2
When CONFIG_FIT_SIGNATURE is activated, CONFIG_LEGACY_IMAGE_FORMAT is deactivated and the define IMAGE_FORMAT_LEGACY don't exist with include/image.h: #if defined(CONFIG_LEGACY_IMAGE_FORMAT) #define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */ #endif This patch adds the needed check on compilation flag CONFIG_LEGACY_IMAGE_FORMAT to avoid the compilation error for command stm32prog: cmd_stm32prog.c:81:8: error: ‘IMAGE_FORMAT_LEGACY’ undeclared (first use in this function); did you mean ‘IMAGE_FORMAT_FIT’? 81 | if (IMAGE_FORMAT_LEGACY == | ^~~~~~~~~~~~~~~~~~~ | IMAGE_FORMAT_FIT Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18stm32mp: stm32prog: add support of initrd in flashlayoutPatrick Delaunay3-10/+24
Add the support in command stm32prog of kernel load and start with initrd file, identify by the partition Type "Binary" in the flashlayout.tsv, for example: - 0x01 fsbl Binary none 0x0 tfa.stm32 - 0x03 fip Binary none 0x0 fip.bin P 0x10 kernel System ram0 0xC2000000 uImage.bin P 0x11 dtb FileSystem ram0 0xC4000000 board.dtb P 0x12 initrd Binary ram0 0xC4400000 <initrd> The <initrd> file can be a legacy image "uInitrd", generated with mkimage, or a RAW initrd image "initrd.gz". After a DFU detach the bootm command with be executed with the associated address, for example: $> bootm 0xC2000000 0xC4400000:<size> 0xC4000000 When the "Binary" partition type is absent, the 'bootm' command starts the kernel without ramdisk, for example: $> bootm 0xC2000000 - 0xC4000000 With this paths, it is no more mandatory to generate FIT including the kernel, DT and initrd: - 0x01 fsbl Binary none 0x0 tfa.stm32 - 0x03 fip Binary none 0x0 fip.bin P 0x10 fit System ram0 0xC2000000 fit.bin Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18stm32mp: stm32prog: add timeout in stm32prog_serial_get_bufferPatrick Delaunay1-2/+10
Handle timeout in stm32prog_serial_get_buffer to sent NACK to STM32CubeProgrammer when the buffer is not fully received. This patch avoids to reach the STM32CubeProgrammer timeout and the associated unrecoverable error. Timeout error occurred while waiting for acknowledgment. Error: Write Operation fails at packet number 4165 at address 0x1044FF Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18stm32mp: stm32prog: remove all the header check for UART downloadPatrick Delaunay3-148/+22
This patch removes the header check for UART download; the check of checksum is not mandatory with even parity and chuck checksum for each 256 received bytes and it is only done for STM32 image (FSBL = TF-A BL2), not for FIT image. This patch solve issue of duplicated 0x100 byte written with FIP header. Fixes: 4fb7b3e10891 ("stm32mp: stm32prog: add FIP header support") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18board: stm32mp1: correct the property name for ethPatrick Delaunay2-4/+4
Use the correct name for STMicroelectronics phys config properties, replace '_' by '-': "st,eth_clk_sel" => "st,eth-clk-sel" "st,eth-ref-clk-sel" => st,eth-clk-sel" These property name are aligned with the upstreamed Linux kernel binding: linux/Documentation/devicetree/bindings/net/stm32-dwmac.yaml See Linux kernel commit "dt-bindings: net: stmmac: add phys config properties" merged in v5.1-rc1. This patch allow to reuse the kernel device tree directly in U-Boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18dfu: dfu_mtd: set max_buf_size to erasesize also for NOR devicesPatrick Delaunay1-4/+1
For NOR devices the logical DFU buffer size is the sector_size, as it is done in dfu_sf.c or in spi/sf_mtd.c (sf_mtd_info.erasesize = flash->sector_size) For NAND the DFU size was already limited to erasesize as has_pages = true. So the mtd dfu backend can use this erasesize for all the MTD devices, NOR and NAND with dfu->max_buf_size = mtd->erasesize This difference was initially copied from MTD command, where data is fully available in RAM without size limitation. This patch avoids to have many sector write in dfu_mtd.c at the end of the DFU transfer and avoids issues with USB timeout or WATCHDOG. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18spi: stm32_qspi: Fix short data write operationDaniil Stas1-14/+15
TCF flag only means that all data was sent to FIFO. To check if the data was sent out of FIFO we should also wait for the BUSY flag to be cleared. Otherwise there is a race condition which can lead to inability to write short (one byte long) data. Signed-off-by: Daniil Stas <daniil.stas@posteo.net> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-06-18mtd: nand: NFC drivers for RK3308, RK2928 and othersYifeng Zhao3-0/+1270
This driver supports Rockchip NFC (NAND Flash Controller) found on RK3308, RK2928, RKPX30, RV1108 and other SOCs. The driver has been tested using 8-bit NAND interface on the ARM based RK3308 platform. Support Rockchip SoCs and NFC versions: - PX30 and RK3326(NFCv900). ECC: 16/40/60/70 bits/1KB. CLOCK: ahb and nfc. - RK3308 and RV1108(NFCv800). ECC: 16 bits/1KB. CLOCK: ahb and nfc. - RK3036 and RK3128(NFCv622). ECC: 16/24/40/60 bits/1KB. CLOCK: ahb and nfc. - RK3066, RK3188 and RK2928(NFCv600). ECC: 16/24/40/60 bits/1KB. CLOCK: ahb. Supported features: - Read full page data by DMA. - Support HW ECC(one step is 1KB). - Support 2 - 32K page size. - Support 8 CS(depend on SoCs) Limitations: - No support for the ecc step size is 512. - Untested on some SoCs. - No support for subpages. - No support for the builtin randomizer. - The original bad block mask is not supported. It is recommended to use the BBT(bad block table). Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18configs: rockchip: rk3399: Khadas Edge add USB OHCIArtem Lapkin3-0/+6
Problem: USB2.0 port can recognize any USB1.1 devices (like usb keyboard) Add missed USB OHCI configuration USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (12 Mb/s, 0mA) | U-Boot Root Hub | +-2 Human Interface (1.5 Mb/s, 100mA) Dell KB216 Wired Keyboard Signed-off-by: Artem Lapkin <art@khadas.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18ARM64: rockchip: evb_rk3399: add usb ohci definationsArtem Lapkin1-0/+3
Problem: USB2.0 port can recognize any USB1.1 devices (like usb keyboard) Add missed USB OHCI configuration USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (12 Mb/s, 0mA) | U-Boot Root Hub | +-2 Human Interface (1.5 Mb/s, 100mA) Dell KB216 Wired Keyboard Signed-off-by: Artem Lapkin <art@khadas.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18pci: pcie_dw_rockchip: Replace msleep occurences by udelayAnand Moon1-5/+5
Replace msleep occurences by udelay. drivers/pci/pcie_dw_rockchip.c:254:3: warning: implicit declaration of function 'msleep' [-Wimplicit-function-declaration] Cc: Patrick Wildt <patrick@blueri.se> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18pci: pcie_dw_rockchip: Drop the unused variable warningAnand Moon1-2/+0
Drop the unused variable warning below. drivers/pci/pcie_dw_rockchip.c:161:6: warning: unused variable 'val' [-Wunused-variable] 161 | u32 val; | ^~~ Cc: Patrick Wildt <patrick@blueri.se> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Patrick Wildt <patrick@blueri.se> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18pci: pcie_dw_rockchip: Fixed the below compilation errorAnand Moon1-2/+2
Use the generic error number instead of specific error number. Changes fix the below error. drivers/pci/pcie_dw_rockchip.c: In function 'rk_pcie_read': drivers/pci/pcie_dw_rockchip.c:70:10: error: 'PCIBIOS_UNSUPPORTED' undeclared (first use in this function) 70 | return PCIBIOS_UNSUPPORTED; | ^~~~~~~~~~~~~~~~~~~ drivers/pci/pcie_dw_rockchip.c: In function 'rk_pcie_write': drivers/pci/pcie_dw_rockchip.c:90:10: error: 'PCIBIOS_UNSUPPORTED' undeclared (first use in this function) 90 | return PCIBIOS_UNSUPPORTED; | ^~~~~~~~~~~~~~~~~~~ Cc: Patrick Wildt <patrick@blueri.se> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Patrick Wildt <patrick@blueri.se> Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18board: rockchip: Add rk3568 evb supportJoseph Chen7-0/+85
Add support for rk3568 evaluation board. Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18rockchip: Add rk3568 architecture coreJoseph Chen11-0/+643
RK3568 is a high-performance and low power quad-core application processor designed for personal mobile internet device and AIoT equipments. Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18rockchip: rk3568: Add sdram driverJoseph Chen2-0/+57
Add the driver for rk3568 u-boot to get sdram capacity. Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18arm: dts: rockchip: Add dts for rk3568 evbJoseph Chen6-0/+4032
Add dts for rk3568 evb, sync from the linux kernel upstream list [0]. [0] https://patchwork.kernel.org/project/linux-rockchip/list/?series=474969 Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18arm: dts: Sync rockchip-pinconf.dtsi from kernelJoseph Chen1-0/+344
Sync from linux kernel: https://patchwork.kernel.org/project/linux-rockchip/list/?series=474969 Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18rk3399_common: setup fdtoverlay_addr_r valueArtem Lapkin1-0/+1
fdtoverlay (pxe_utils) require define fdtoverlay_addr_r env variable for example sunxi-common.h meson64.h already have it. Signed-off-by: Artem Lapkin <art@khadas.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18rockchip: rk3568: add clock driverElaine Zhang3-0/+3464
Add rk3568 clock driver and cru structure definition. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18rockchip: rk3568: add device tree fileElaine Zhang1-0/+925
Add dts binding header for rk3568, files origin from kernel. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2021-06-18arm: dts: stm32mp157c-odyssey-som: enable SDMMC2 in SPLGrzegorz Szymaszek1-0/+21
Enable the SDMMC2 device tree node, as well as the pins it uses, in U-Boot SPL. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18arm: dts: stm32mp157c-odyssey-som: enable the SDMMC2 eMMC HS DDR modeGrzegorz Szymaszek1-0/+1
Enable the SDMMC2 eMMC high-speed DDR mode as it is done in the corresponding Linux kernel device tree. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18arm: dts: stm32mp157c-odyssey-som: set the SDMMC2 VQMMC supplyGrzegorz Szymaszek1-0/+1
Set the SDMMC2 VQMMC supply to vdd (buck3). Note that in the corresponding Linux kernel device tree, the supply is set to v3v3 (buck4), which is wrong. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18arm: dts: stm32mp157c-odyssey-som: enable all SDMMC2 data lanesGrzegorz Szymaszek1-4/+4
Add the “sdmmc2_d47_pins_d” pins to the SDMMC2 pinctrls. Increase the bus width from four to eight. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-18arm: dts: stm32mp157c-odyssey-som: fix the basic SDMMC2 propertiesGrzegorz Szymaszek1-2/+3
The SDMMC2 interface hosts an eMMC. Replace the interface properties that would only apply to SD cards—“broken-cd” and “disable-wp”—with relevant ones: “non-removable”, “no-sd” and “no-sdio”. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-06-17Merge tag 'u-boot-atmel-2021.10-a' of ↵Tom Rini34-161/+109
https://source.denx.de/u-boot/custodians/u-boot-atmel into next First set of u-boot-atmel features for the 2021.10 cycle: This feature set converts the boards pm9261 and pm9263 Ethernet support to DM; enables hash command for all SAM boards; fixes the NAND pmecc bit-flips correction; adds Falcon boot for sama5d3_xplained board; and other minor adjustments.
2021-06-17Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-riscv ↵Tom Rini24-1711/+1437
into next - K210 updates
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-20 21:47:05 +0300