summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-06-23arm64: zynqmp: Remove information about dma clock on zcu106Michal Simek1-1/+0
Clock setting is not static anymore that's why it depends on firmware setup that's why remove this comment. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Remove unused property from SD/USBMichal Simek1-8/+0
Linux kernel is not using these properties that's why they can be removed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Remove can aliases from zc1751Michal Simek2-4/+0
Networking subsystem is not using aliases that's why remove them for CAN devices. There is also no any other Xilinx ZynqMP DT file with them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Remove si5328 and si5382 nodesMichal Simek5-40/+5
There are no drivers for these devices that's why remove that nodes completely. This change is done based on Linux kernel. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210308115437.2232847-1-quanyang.wang@windriver.com
2021-06-23xilinx: Convert xlnx,eeprom property to nvmem aliasMichal Simek17-18/+19
Convert all boards to use nvmem alias instead of xlnx,eeprom. The change is done based on discussion in the link below. Link: https://lore.kernel.org/r/CAL_JsqLMDqpkyg-Q7mUfw-XH67-v068Q6e9wTq2UOoN=0-_coQ@mail.gmail.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: rtc: Update rtc calibration valueSrinivas Neeli1-1/+1
As per the design specification "The 16-bit Seconds Calibration Value represents the number of Oscillator Ticks that are required to measure the largest time period that is less than or equal to 1 second. For an oscillator that is 32.768 KHz, this value will be 0x7FFF." Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Sync psgtr location on zcu100/zcu106Michal Simek2-14/+14
psgtr node should be below pinctrl for easier comparion among dts files. That's why move that nodes to different location. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Sync dp port location on zc1751 dc4Michal Simek1-9/+9
Historically dpdma and dpsub are placed at the end of files. Move nodes there for easier comparison among dts files. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Remove unused dp_aclk clockMichal Simek1-8/+1
dp_aclk is not used anywhere that's why remove it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Remove addition newline from zc1751 dc1Michal Simek1-1/+0
Trivial patch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Add maximum-speed property for dwc3 nodesMichal Simek5-0/+5
dwc3 can be used only for higher speeds than super-speed that's why explicitly set it up. This is also aligned with other ZynqMP dts files. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Remove additional header from zc1232 DTMichal Simek1-1/+0
Remove unused phy.h from zc1232 DTS. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23zynqmp: Remove u-boot,dm-pre-reloc for uart instancesMichal Simek7-11/+0
Uarts already have u-boot,dm-pre-reloc via zynqmp.dtsi that's why there is no need to have them in platform DT files too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23zynqmp: Pass bl32 entry to TF-A via xilinx handoff structureMichal Simek1-5/+14
There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23zynqmp: Generate u-boot.its also with TEE dynamicallyMichal Simek1-1/+40
The first change is to trying to find out TF-A load address based on reading elf file. Expectation is that bl31.bin is in the same folder as bl31.elf. It brings new flexibility to place TF-A to any address (DDR included). And also enable TEE generation also with TEE configuration. Expecation is the same as above that tee.bin and tee.elf are in the same folder. User has to just define link to BL31/BL32 binary files and the rest should be handled by the script. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23zynqmp: Do not place u-boot to reserved memory locationMichal Simek1-0/+21
TF-A and SecureOS can allocate the part of DDR for self but U-Boot is not handling this configuration that the part of memory is reserved and shouldn't be used by U-Boot. That's why read all reserved memory locations and don't use it. The code was taken from commit 4a1b975dac02 ("board: stm32mp1: reserve memory for OP-TEE in device tree") and commit 1419e5b5167e ("stm32mp: update MMU config before the relocation") which is used by stm32 and does the job properly. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23zynqmp: Enable regulatorsMichal Simek1-0/+3
Enable command and fixed regulators. XDP platform is using them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Update Copyright years to 2021Michal Simek16-16/+16
Trivial change for all files I have touched recently. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Add label for zynqmp_ipiMichal Simek1-1/+1
Add label which is used by bootloader for adding bootloader specific flag. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/3dc8416abdd3498e61edcd83830a12af295c5c6d.1611224800.git.michal.simek@xilinx.com
2021-06-23arm64: zynqmp: Move DP nodes to the end of file (zcu106)Michal Simek1-11/+11
Just sync it with others for easier comparison. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Add reset description for sataMichal Simek1-0/+1
Sata needs to get reset before configuration that's why add property for it there. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Add missing SMID for pcie to zynqmp.dtsiStefano Stabellini1-0/+2
The SMMU is disabled in device tree so this change has no impact. The benefit is that this way it is in sync with xen.dtsi. Xen enables the SMMU and makes use of it. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
2021-06-23arm64: zynqmp: Disable CCI by defaultMichal Simek1-0/+1
There is no reason to have CCI no enabled by default. Enable it when your system configuration requires it. In Xilinx configuration flow this is work for Device Tree Generator which reads information from HW Design configuration. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Update psgtr clocks index for boardsMichal Simek5-29/+29
Update the psgtr clock indexing for couple of zynqmp boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Handle MMC seq number based on boot deviceMichal Simek2-0/+36
K26 has EMMC and SD and default 0 is not working when system is booting out of SD which is controller 1. Add controller autodetection via mmc_get_env_dev(). The same code is used for distro_boot selection done in board_late_init(). bootseq variable can't be reused because this is called so late. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Add psu_init_gpl for k26 boardsMichal Simek2-0/+674
Add psu_init_gpl file for getting SPL to work directly from the tree. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23ARM: zynq: Rename bus to be align with simple-bus yamlMichal Simek1-1/+1
Rename amba to AXI. Based on Xilinx Zynq TRM (Chapter 5) chip is "AXI point-to-point channels for communicating addresses, data, and response transactions between master and slave clients. This ARM AMBA 3.0..." Issues are reported as: .. amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' >From schema: ../github.com/devicetree-org/dt-schema/dtschema/schemas/simple-bus.yaml Similar change has been done for Xilinx ZynqMP SoC. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/8a4bc80debfbb79c296e76fc1e4c173e62657286.1606397101.git.michal.simek@xilinx.com
2021-06-23arm64: zynqmp: Enable gpio driver for zcu1275/zcu1285Michal Simek3-0/+12
Enable gpio driver on these boards. GPIOs can be used on any board. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Add support for SVD devicesMichal Simek1-1/+27
SVDs are using different name which can't be handled via zynqmp_devices structure. That's why introduce zynqmp_detect_svd_name() which checks ID code for these devices and show proper name for them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Enable EFI secure bootMichal Simek1-0/+1
Enabling EFI secure boot which is required for EBBR specification. Enabling this will fix "RT.SetVariable - Create one Time Base Auth Variable, the expect return status should be EFI_SUCCESS" Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: xilinx: Set CONFIG_ZYNQMP_FIRMWARE config for mini emmcT Karthik Reddy4-0/+4
CONFIG_ZYNQMP_FIRMWARE enables zynqmp firmware driver. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
2021-06-23arm64: zynqmp: Fix application loading on R5 core1Ashok Reddy Soma1-31/+39
From U-Boot, loading application on RPU core 0 is fine but loading on core 1 is not handled properly. Lock-step mode needs both the R5 cores to be initialized and it is working fine. Whereas in SPLIT mode individual R5 cores needs to be initialized as they need to execute differenet applications. Handle both these lock-step and split modes by propagating mode and RPU core number(4 for RPU0 and 5 for RPU1) for various functions and by adding conditions in those functions. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23ARM: zynq: Fix OCM mapping to be aligned with binding on zc702Michal Simek1-0/+6
The Linux commit f69629919942 ("dt-bindings: sram: Convert SRAM bindings to json-schema") converted binding to yaml and some missing required properties started to be reported. Align binding based on it. The patch is fixing these warnings: .../zynq-zc702.dt.yaml: sram@fffc0000: '#address-cells' is a required property .../zynq-zc702.dt.yaml: sram@fffc0000: '#size-cells' is a required property .../zynq-zc702.dt.yaml: sram@fffc0000: 'ranges' is a required property >From schema: .../Documentation/devicetree/bindings/sram/sram.yaml Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/87c02786ccd8d7827827a9d95a8737bb300caeb0.1606397101.git.michal.simek@xilinx.com
2021-06-23ARM: zynq: Convert at25 binding to new description on zc770-xm013Michal Simek1-4/+3
The Linux commit f8f79fa6bb25 ("dt-bindings: at25: convert the binding document to yaml") converted binding to yaml and 3 deprecated properties pop up. The patch is fixing these warnings: .../zynq-zc770-xm013.dt.yaml: eeprom@2: 'pagesize' is a required property .../zynq-zc770-xm013.dt.yaml: eeprom@2: 'size' is a required property .../zynq-zc770-xm013.dt.yaml: eeprom@2: 'address-width' is a required property >From schema: .../Documentation/devicetree/bindings/eeprom/at25.yaml by converting them to new binding. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/be2c1125d98386033e182012eb08986924707a76.1606397101.git.michal.simek@xilinx.com
2021-06-23zynqmp: spl: support DRAM ECC initializationJorge Ramirez-Ortiz6-0/+218
Use the ZDMA channel 0 to initialize the DRAM banks. This avoid spurious ECC errors that can occur when accessing unitialized memory. The feature is enabled by setting the option CONFIG_SPL_ZYNQMP_DRAM_ECC_INIT and providing the following data: SPL_ZYNQMP_DRAM_BANK1_BASE: start of memory to initialize SPL_ZYNQMP_DRAM_BANK1_LEN : len of memory to initialize (hex) SPL_ZYNQMP_DRAM_BANK2_BASE: start of memory to initialize SPL_ZYNQMP_DRAM_BANK2_LEN : len of memory to initialize (hex) Setting SPL_ZYNQMP_DRAM_BANK_LEN to 0 takes no action. Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23gpio: pca953x: Add missing i2c dependencyMichal Simek1-1/+1
pca953x also depends on i2c that's why add dependency to Kconfig. Where GPIO is enabled but I2C compilation error pops up. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-06-22Makefile: Adjust indention of GENENV quiet outputJan Kiszka1-1/+1
The column width for a command name is 8. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2021-06-22autoboot: fix typos of CONFIG_AUTOBOOT_USE_MENUKEYDa Xue1-4/+4
Replace typo CONFIG_USE_AUTOBOOT_MENUKEY with CONFIG_AUTOBOOT_USE_MENUKEY as when they were introduced initially there was some mismatch in which name was used where. Fixes: 8fc31e23aa83 ("autoboot: Rename CONFIG_MENUKEY to CONFIG_AUTOBOOT_MENUKEY") Signed-off-by: Da Xue <da@libre.computer>
2021-06-22disk/part_dos.c: Fix a variable typo in write_mbr_partitions()Christian Melki1-1/+1
This function is passed *dev not *dev_desc, so pass the right name to part_init(). Fixes: f14c5ee5ab8b ("disk: part_dos: update partition table entries after write") Signed-off-by: Christian Melki <christian.melki@t2data.com>
2021-06-22azure: Use msys2 20210604 installer for Windows buildBin Meng1-1/+1
MSYS2 Windows build started to fail since yesterday (Jun 21): checking keyring... checking package integrity... error: gcc-libs: signature from "David Macek <david.macek.0@gmail.com>" is unknown trust :: File /var/cache/pacman/pkg/gcc-libs-10.2.0-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). error: gcc: signature from "David Macek <david.macek.0@gmail.com>" is unknown trust :: File /var/cache/pacman/pkg/gcc-10.2.0-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). error: failed to commit transaction (invalid or corrupted package) Errors occurred, no packages were upgraded. Switching to the latest installer (version 20210604) seems to fix it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Tom Rini <trini@konsulko.com>
2021-06-22mtd: spi-nor-ids: Add Macronix MX66UW2G345Gzhengxun1-0/+1
The MX66UW2G345G is Macronix Flash with SINGLE and OCTAL I/O. Hence, add SPI_NOR_OCTAL_READ flag for this flash. Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [jagan: change order of id flags] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: zhengxun <zhengxunli.mxic@gmail.com>
2021-06-22Revert "mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card ↵Fabio Estevam2-23/+8
clock output" This reverts commit 63756575b42b8b4fb3f59cbbf0cedf03331bc2d2. Since this commit a imx6qdl-pico board boots extremely slowly in both SPL as well as U-Boot proper. Fix this regression by reverting the offending commit for now. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Pierre-Jean Texier <texier.pj2@gmail.com>
2021-06-22mmc: mmc-uclass: change to static about dm functionJaehoon Chung2-24/+12
Change to static about dm function. They can be used with wrapper functions. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-06-22mmc: fsl_esdhc_imx: use mmc_send_cmd instead of dm_mmc_send_cmdJaehoon Chung3-2/+2
Use mmc_send_cmd instead of dm_mmc_send_cmd. It doesn't need to distinguish this function. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-06-22mmc: Update environment variable with active partitionReuben Dowle2-6/+12
This patch allows uboot scripts make choices about where to boot from based on the active mmc boot partition. This allows having two copies of kernel, filesystems etc, and choosing which to boot from based off of the active bootloader partition. Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-06-22mmc: dwmmc: socfpga: Get "fifo-mode" property from DTLey Foon Tan1-0/+2
Add FIFO mode support for SoCFPGA dwmmc, read "fifo-mode" property from DT. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-06-22mmc: dw_mmc: Fixes data read when receiving DTO interrupt in FIFO modeLey Foon Tan1-3/+3
The data read is not working when using FIFO mode. From DesignWare databook, when a Data_Transfer_Over (DTO) interrupt is received, the software should read the remaining data from FIFO. Add DTO interrupt checking on data read path and clear interrupts before start reading from FIFO. So, it doesn't clear the next pending interrupts unintentionally after read from FIFO. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-06-22mmc: mtk-sd: increase the minimum bus frequencyWeijie Gao1-0/+5
With a 48MHz input clock, the lowest bus frequency can be as low as 48000000 / (4 * 4095) = 2930Hz. Such an extremely low frequency will cause the mmc framework take seconds to finish the initialization. Limiting the minimum bus frequency to a slightly higher value can solve the issue without any side effects. Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-06-21ARM: dts: k3-j7200-common-proc-board-u-boot.dtsi: Fix dtc warningsVignesh Raghavendra1-0/+2
Fix following dtc warning by explicitly setting up #size-cells and #address-cells when overriding node in -u-boot.dtsi arch/arm/dts/k3-j7200-common-proc-board.dtb: Warning (reg_format): /bus@100000/bus@28380000/mcu-navss/ringacc@2b800000:reg: property has invalid length (80 bytes) (#address-cells == 2, #size-cells == 1) Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2021-06-21imx8mm: configs: enable distro default featuresAndrey Zhizhikin1-2/+1
imx8mm ekv has been switched to use distro boot commands, but had no correct options enabled to support sysboot. According to the README.distro, sysboot is consindered to be a recommended way of using distro boot commands, it required default distro features to be enabled instead of only those that are relevant to the boot script. Replace the boot script specific options in the config to a default distro option. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Peng Fan <peng.fan@nxp.com> Fixes: 2df8930bf9 ("imx8mm: configs: add support for distro boot commands") Reviewed-by: Fabio Estevam <festevam@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-20 20:02:28 +0300