summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-10-22configs: at91: sama5: enable CMD_IMIEugen Hristev12-12/+0
Enable iminfo command with CONFIG_CMD_IMI Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22configs: at91: sam9x5: added FIT and iminfo supportEugen Hristev4-4/+4
Enabled FIT image support and iminfo command for FIT information. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22board: at91sam9x5: add environment var for cpu typeEugen Hristev2-0/+11
When booting and CPU is detected from cpuid, we also need an environment variable that will be used in boot commands to load the proper devicetree. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22ARM: omap3logic: Fix MMC nameAdam Ford1-1/+1
In my haste to migrate SPL to DM, I copied the wrong name. While it really doesn't matter, I'd prefer the name to match the board, so am335x_mmc0 is now called omap3_logic_mmc0 Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-22ARM: omap3logic: Specify DM serial driver as omap_serialAdam Ford1-1/+1
With the new omap_serial driver, this patch uses this instead from the former ns16550_serial driver. Even though the omap_serial driver is essentially the same. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-22ARM: omap3logic: Encapsulate the MUSB functions in check for DMAdam Ford1-2/+4
With the DM_USB working for USB host features, encapsulate the USB gadget initialization in a precomiler check. If DM is enabled, we don't need to manually initialize the MUSB driver. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-22ARM: omap3_logic.c: Optimize DDR timings based on OMAP35 or 36/37Adam Ford1-5/+15
The default timings are assumming an OMAP36 / AM37 / DM37, but the OMAP35 controller is a bit slower, so DDR may operate out of spec when under stress. This patch checks the processor type and sets the DDR timings according to processor type. Fixes: 5ad4212ce0d5 ("ARM: DTS: Add Logic PD OMAP35/DM37 SOM-LV and OMAP35 Torpedo") Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-22ARM: da850evm_direct_nor: Remove DM_I2C_COMPATAdam Ford1-1/+0
The da850evm does not need this enabled, so this removes a notice that appears during compile time that says "Please remove" Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-20test: Add test for PCI device without compat string and with DT nodeMarek Vasut1-0/+5
Add test which checks if a PCI device described in DT with an entry and reg = <...> property, but without compatible string results in a valid U-Boot PCI udevice with the udevice.node populated with reference to this DT node. Also check if the other PCI device without a DT node does not contain any bogus udevice.node. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-20test: Add PCI device entry without compat string and with DT nodeMarek Vasut1-1/+5
Add PCI entry without compatible string and with a DT node only with reg = <...> property into the DT. This is needed for the tests to verify whether such a setup creates an U-Boot PCI device with the DT node associated with it in udevice.node. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-20pci: Update documentation to make 'compatible' string optionalMarek Vasut1-5/+9
Reword the documentation to make it clear the compatible string is now optional, yet still matching on it takes precedence over PCI IDs and PCI classes. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-20pci: Support parsing PCI controller DT subnodesMarek Vasut1-3/+29
The PCI controller can have DT subnodes describing extra properties of particular PCI devices, ie. a PHY attached to an EHCI controller on a PCI bus. This patch parses those DT subnodes and assigns a node to the PCI device instance, so that the driver can extract details from that node and ie. configure the PHY using the PHY subsystem. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-20common: command: fix typoHeinrich Schuchardt1-1/+1
%s/CMD_RET_SUCCESX/CMD_RET_SUCCESS/g Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-10-20Convert CONFIG_FLASH_CFI_DRIVER et al to KconfigAdam Ford624-732/+1684
This converts the following to Kconfig: CONFIG_FLASH_CFI_DRIVER CONFIG_SYS_FLASH_USE_BUFFER_WRITE CONFIG_FLASH_CFI_MTD CONFIG_SYS_FLASH_PROTECTION CONFIG_SYS_FLASH_CFI Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-migrate] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-19travis: Add sandbox/clang-7 supportTom Rini1-7/+20
To make testing with clang support easier, add sandbox/clang-7 combination to our testing matrix. To facilitate this, switch to using the "sources" method that the travis.yml file supports to list additional repositories and add the official one for llvm-7. Due to buildman not supporting using clang at this time add logic to manually build a single sandbox configuration in the expected output directory so that we can still invoke all of our tests. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-19bootcount: Make bootcount magic configurableMarek Vasut6-13/+19
Add new Kconfig option, SYS_BOOTCOUNT_MAGIC, to select the boot counter magic word. This can be useful ie. in case the entire boot counter register is not usable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com>
2018-10-19travis: Switch to i386 version toolchain for x86Bin Meng1-8/+8
Currently this uses x86_64 version toolchain for x86 build in travis-ci. Change it to i386 version to avoid updating the buildman toolchain path every time when the toolchain version number is changed, eg: from 7.3.0 to 8.1.0. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-19travis: Remove or32 toolchain infoBin Meng1-1/+0
or32 is not supported by U-Boot anymore. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-19ARM: mach-omap2: Kconfig: Make SYS_MPUCLK dependent on AM33XXAdam Ford1-0/+1
This value is unly used in arch/arm/mach-omap2/am33xx/ clock_am33xx.c, so let's make it dependent on AM33XX since that is the only way this file gets compiled into the code according to the Makefile. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Fix symbol name] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-19arm: lpc32xx: remove phantom CONFIG_LPC32XX_SDRAM_ config optionVladimir Zapolskiy2-4/+0
The option has never existed and config whitelist script accumulates it from a comment block, wipe it out from the source code. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-19work_92105: remove unused CONFIG_SPL_NAND_BOOT configuration optionVladimir Zapolskiy1-1/+0
The option is unused, SPL image gets a wanted boot device by standard spl_boot_device() call. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-19work_92105: remove unused CONFIG_LPC32XX_SPL configuration optionVladimir Zapolskiy2-4/+0
The CONFIG_LPC32XX_SPL option from board include file has never been used, it is safe to remove it. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-19Makefile: add LPC32xx precondition for building platform imagesVladimir Zapolskiy1-0/+2
To prevent accidental build failures the change converts a number of NXP LPC32xx specific image targets to be conditionally dependent on target build configuration. The wrapped image targets always contain a U-Boot SPL binary and the images are supposed to be directly flashed on a NAND flash device for read access by LPC32xx NAND MLC controller. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-19arm: lpc32xx: add CONFIG_ARCH_LPC32XX build optionVladimir Zapolskiy6-30/+37
The explicit arch specific build symbol allows to group supported boards, generalize common config options and it will serve as a dependency for platform only drivers. Two related board defconfigs are resynced after the change. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-19Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini20-170/+106
2018-10-18ARM: rmobile: Drop PRR syscon driverMarek Vasut1-53/+8
The PRR syscon driver is available too late for Multi DTB build of U-Boot. Replace it with simple check whether a platform is Gen3 or not and produce an address of the PRR. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-10-18ARM: dts: rmobile: Build -u-boot variants of DTsMarek Vasut1-8/+8
Build the -u-boot variants of the device trees so they can be included in Multi-DTB fitImage, which in turn allows us to build single U-Boot image for multiple boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-10-18ARM: dts: rmobile: r8a77990: Add USB2.0(EHCI) DT nodes on EbisuHiroyuki Yokoyama3-0/+74
Add device tree nodes for USB2.0(EHCI) on R-Car E3 Ebisu board. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: Fix module clock controls refer status on Gen3Hiroyuki Yokoyama3-6/+6
When referring to the MSTPSR register, it contains the clock status of SYS, RT, SECURE, and controlling SMSTPCR using this value has the problem of being affected by the RT and SECURE status.This patch changes the reference register to SMSTPCR. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: Enable cache command on Gen3Hiroyuki Yokoyama3-1/+2
This patch enables the cache command, mostly for convenience of testing. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-10-18ARM: rmobile: Tidy up SYSC_PWRx define of 3DG on Gen3Hiroyuki Yokoyama3-18/+0
Tidy up unused definition related to power control of 3DG. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: salvator-x: Remove GSX clock force supplyHiroyuki Yokoyama1-12/+0
GSX clock force supply code is unnecessary at U-Boot, because GSX clock control is supported at the kernel driver. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: Remove Watchdog and CPG settings on Gen3Hiroyuki Yokoyama3-39/+0
This code is unnecessary, because these registers are set by the initial program loader (IPL). Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: Remove TMU0/TMU1 settings on Gen3Hiroyuki Yokoyama5-25/+0
U-Boot uses ARM generic timer, TMU0 and TMU1 are not used, remove them. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: Remove console parameter from bootargs on Gen3Hiroyuki Yokoyama8-8/+8
This patch removes 'console=' argument, because kernel uses stdout-path as parameter. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: Fix CPGWPR Address define and Settings on Gen3Hiroyuki Yokoyama3-6/+6
This patch fixes the write-protect control of CPG. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-17Merge tag 'signed-efi-2018.11' of git://github.com/agraf/u-bootTom Rini15-50/+112
Patch queue for efi - 2018-10-17 A few bug fixes for the 2018.11 release: - Fix block seeking on 32bit - Fix execution with DEBUG set - Fix a few Coverity found bugs - Fix warnings Heinrich Schuchardt (13): efi_loader: fix relocation on x86_64 efi_loader: correct signature of GetPosition, SetPosition efi_loader: execute efi_save_gd() first efi_loader: efi_allocate_pool(EFI_ALLOCATE_ANY_PAGES, ...) efi_loader: error handling in read_console() efi_loader: return type efi_console_register() efi_loader: superfluous statement in is_dir() efi_loader: memory leak in efi_set_variable() efi_loader: remove lcd.h from efi_net.c arm: do not include efi_loader.h twice efi_loader: fix typo in efi_boottime.c efi_selftest: creating new handle in controller test efi_loader: efi_dp_get_next_instance() superfluous statement Tom Rini (2): efi_loader: Fix warning in efi_load_image() fs: fat: Fix warning in normalize_longname()
2018-10-16efi_loader: efi_dp_get_next_instance() superfluous statementHeinrich Schuchardt1-1/+0
Remove a superfluous statement in efi_dp_get_next_instance(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16efi_selftest: creating new handle in controller testHeinrich Schuchardt1-0/+2
When the last protocol interface is uninstalled the handle is deleted but this does not set the value of the handle to NULL. To create a new handle with OpenProtocolInterface the value of the handle must be NULL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16Merge git://git.denx.de/u-boot-microblazeTom Rini56-57/+1052
Xilinx changes for v2018.11-rc2-v2 FPGA: - Fix SPL fpga loading from FIT ARM64: - Fix gic accesses in EL2/EL1 Xilinx: - Add dlc20 board support - Add Versal board support - Sync defconfigs - Enable MP via Kconfig - Add missing efuse node - Enable CDC for zcu100 cmd: - Fix kgdb Kconfig dependency
2018-10-16cmd: kgdb: Enable kgdb only for PPCMichal Simek1-0/+1
Only PPC supports this option that's why there should be proper dependency setup via Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: zynqmp: Enable MP by default via KconfigMichal Simek23-19/+4
Simplify defconfig for ZynqMP but keep option not to enable it for mini targets. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: zynqmp: Add new command for TCM initializationSiva Durga Prasad Paladugu3-3/+43
This patch adds new zynqmp command "zynqmp tcminit mode" to initialize TCM. TCM needs to be initialized before accessing to avoid ECC errors. This new command helps to perform the same. It also makes tcm_init() as global and uses it for doing the TCM initialization. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: zynqmp: Move TCM initialization to a separate routineSiva Durga Prasad Paladugu1-2/+8
This patch moves TCM initialization to a separate routine to make it modular and can be reused if required. It also prints warning message now as it writes to TCM. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: versal: Add Xilinx Versal Virtual QEMU boardMichal Simek3-0/+87
Virtual QEMU board is generating DTB self and putting it to VERSAL_QEMU_DTB_ADDR address. Board is using CONFIG_OF_BOARD which ensures that u-boot is aligned with board created by QEMU. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16net: gem: Do not setup any clock for Xilinx SoC VersalMichal Simek1-0/+4
Xilinx SoC Versal is using fixed clock where setting rate is not supported. That's why workaround the driver till real clock driver is supported. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: versal: Add support for new Xilinx Versal ACAPsMichal Simek19-7/+402
Xilinx is introducing Versal, an adaptive compute acceleration platform (ACAP), built on 7nm FinFET process technology. Versal ACAPs combine Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent Engines with leading-edge memory and interfacing technologies to deliver powerful heterogeneous acceleration for any application. The Versal AI Core series has five devices, offering 128 to 400 AI Engines. The series includes dual-core Arm Cortex™-A72 application processors, dual-core Arm Cortex-R5 real-time processors, 256KB of on-chip memory with ECC, more than 1,900 DSP engines optimized for high-precision floating point with low latency. The patch is adding necessary infrastructure in place without enabling platform which is done in separate patch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16efi_loader: fix typo in efi_boottime.cHeinrich Schuchardt1-1/+1
%s/conncected/connected/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16fs: fat: Fix warning in normalize_longname()Tom Rini1-1/+1
As observed with clang: fs/fat/fat_write.c:1024:13: warning: comparison of constant 128 with expression of type 'char' is always false [-Wtautological-constant-out-of-range-compare] if ((0x80 <= c) && (c <= 0xff)) ~~~~ ^ ~ fs/fat/fat_write.c:1024:25: warning: comparison of constant 255 with expression of type 'char' is always true [-Wtautological-constant-out-of-range-compare] if ((0x80 <= c) && (c <= 0xff)) ~ ^ ~~~~ Fixes: 25bb9dab14f4 ("fs: fat: check and normalize file name") Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16efi_loader: Fix warning in efi_load_image()Tom Rini1-1/+1
As observed with clang: lib/efi_loader/efi_boottime.c:1624:7: warning: variable 'info' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (ret != EFI_SUCCESS) ^~~~~~~~~~~~~~~~~~ lib/efi_loader/efi_boottime.c:1653:7: note: uninitialized use occurs here free(info); ^~~~ lib/efi_loader/efi_boottime.c:1624:3: note: remove the 'if' if its condition is always false if (ret != EFI_SUCCESS) ^~~~~~~~~~~~~~~~~~~~~~~ lib/efi_loader/efi_boottime.c:1602:31: note: initialize the variable 'info' to silence this warning struct efi_loaded_image *info; ^ = NULL Rather than change how we unwind the function it makes the most sense to initialize info to NULL so that we can continue to pass it to free(). Fixes: c982874e930d ("efi_loader: refactor efi_setup_loaded_image()") Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-21 18:06:44 +0300