summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-07-21spl: Provide more information on boot failureSimon Glass3-16/+52
If SPL fails to boot, try to provide an error code to indicate what is wrong. For example, if a uclass is missing, this can return -EPFNOSUPPORT (-96) which provides useful information. Add a helper for accessing the image-loader name so we can drop the use of #ifdefs in this code. Put this feature behind a CONFIG_SHOW_ERRORS option to avoid increasing the code size. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21image: Allow @ in node names when not using signaturesSimon Glass1-1/+1
If signature verification is not in use we don't need to worry about the risk of using @ in node names. Update fit_image_verify() to allow it if the function is not enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21bloblist: Correct condition in bloblist_addrec()Simon Glass2-1/+24
It is possible to add a blob that ends at the end of the bloblist, but at present this is not supported. Fix it and add a regression test for this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21bloblist: Tidy up a few API commentsSimon Glass1-3/+7
Some comments for struct bloblist_hdr are a bit ambiguous. Update them to clarify the meaning more precisely. Also document bloblist_get_stats() properly. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21bloblist: Support resizing a blobSimon Glass3-2/+274
Sometimes a blob needs to expand, e.g. because it needs to hold more log data. Add support for this. Note that the bloblist must have sufficient spare space for this to work. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21cros_ec: Use standard calls for recovery-request checkingSimon Glass1-7/+11
Rather than calling directly into the sandbox SDL code, we can use the normal U-Boot console handling for this feature. Update the code, to make it more generic. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21cros_ec: Support the full-size vboot contextSimon Glass1-5/+3
The v2 format is 64-bytes in size. Support this and drop v1 since it is not used anymore. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21cros_ec: Drop cros_ec_entering_mode()Simon Glass3-23/+0
This function is not needed anymore. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21cros_ec: Allow reading the battery-charge stateSimon Glass2-0/+25
Add a function to read this information from the EC. It is useful for determining whether the battery has enough charge to boot. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21sandbox: Adjust the bloblist default addressSimon Glass2-2/+2
Move this down to provide more space for the bloblist. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21sandbox: Use hinting with the displaySimon Glass1-0/+3
SDL provides a hinting feature which provides a higher-quality image with the double-display option (-K). Enable it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21sandbox: Add work-around for SDL2 displaySimon Glass1-1/+22
At present the display does not show on some machines, e.g. Ubunutu 20.04 but the reason is unknown. Add a work-around until this can be determined. Also include more error checking just in case. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21sandbox: Support executables for more phasesSimon Glass6-38/+86
The SPL header has a function for obtaining the phase in capital letters, e.g. 'SPL'. Add one for lower-case also, as used by sandbox. Use this to generalise the sandbox logic for determining the filename of the next sandbox executable. This can provide support for VPL. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21test: Avoid a build error with SPLSimon Glass1-1/+1
At present this fails to build chromeos_sandbox due to a rebase error in dm_test_pre_run(). Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21test: Add DM_DMA to be disabledSimon Glass1-0/+2
At present if DM_DMA is disabled on a sandbox build, the build fails. Make the test conditional. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21test: Allow CONFIG_SPL_LOAD_FIT to be disabledSimon Glass1-0/+2
At present if this is not enabled on a sandbox build, the build fails. Add a condition to avoid this. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21dm: Support lzma in the flashmapSimon Glass1-0/+2
Allow lzma compression as well as lz4. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21dm: core: Add logging for DM_SEQ_ALIASSimon Glass1-1/+3
It is sometimes helpful to see which sequence is assigned to a device. Add debugging info for that. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21dtoc: Update documentation to cover warnings in more detailSimon Glass1-0/+53
When things go wrong it can be confusing to figure out what to change. Add a few more details to the documentation. Fix a 'make htmldocs' warning while we are here. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Walter Lozano <walter.lozano@collabora.com>
2021-07-21dtoc: Detect drivers which do not parse correctlySimon Glass2-1/+44
At present if a driver is missing a uclass or compatible stirng, this is silently ignored. This makes sense in most cases, particularly for the compatible string, since it is not required except when the driver is used with of-platdata. But it is also not very helpful. When there is some sort of problem with a driver, the missing compatible string (for example) may be the cause. Add a warning in this case, showing it only for drivers which are used by the build. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Walter Lozano <walter.lozano@collabora.com>
2021-07-21dtoc: Detect unexpected suffix on .of_matchSimon Glass2-3/+101
Some rockchip drivers use a suffix on the of_match line which is not strictly valid. At present this causes the parsing to fail. Fix this and offer a warning. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21dtoc: Add a stdout check in test_normalized_name()Simon Glass1-2/+1
This test captures output but does not always check it. Add the missing code and drop the old comment. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-21dtoc: Correct the re_compat regular expressionSimon Glass1-2/+2
This expects a . before the field name (.e.g '.compatible = ...) but presently accepts anything at all. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Walter Lozano <walter.lozano@collabora.com>
2021-07-21dtoc: Allow multiple warnings for a driverSimon Glass1-4/+20
At present we show when a driver is missing but this is not always that useful. There are various reasons why a driver may appear to be missing, such as a parse error in the source code or a missing field in the driver declaration. Update the implementation to record all warnings for each driver, showing only those which relate to drivers that are actually used. This avoids spamming the user with warnings related to a driver for a different board. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Walter Lozano <walter.lozano@collabora.com>
2021-07-21dtoc: Convert to use ArgumentParserSimon Glass1-24/+27
Use this parser instead of OptionParser, which is deprecated. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Walter Lozano <walter.lozano@collabora.com>
2021-07-21dtoc: Avoid using subscripts on match objectsSimon Glass1-1/+1
These are not supported before Python 3.6 so avoid them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Walter Lozano <walter.lozano@collabora.com>
2021-07-21board: sifive: unmatched: reset USB hub, PCIe-USB bridge, and ULPI device in SPLVincent Chen1-0/+36
Ensure USB hub, PCIe-USB bridge, and ULPI device to be reset even if the rebooting is without power-cycling. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-21board: sifive: unmatched: refine GEMGXL initialized function in SPLVincent Chen1-19/+39
Create a new function spl_reset_device_by_gpio to reset the device whose reset pin is connected to the GPIO. Then, using this function to initialize GEMGXL. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-21board: sifive: drop stuff related to unmatched revision 1Zong Li6-1531/+3
This patch reverts the following commits: - 4b4159d0f3 ("riscv: dts: add dts for unmatched rev1") - ffe9a394df ("board: sifive: support spl multi-dtb on unmatched board") We won't plan to support unmatched that the revision below 3 in u-boot, so they can be dropped because they might be useless. Changed in v2: - rebase codebase to the latest master branch Signed-off-by: Zong Li <zong.li@sifive.com> Suggested-by: David Abdurachmanov <david.abdurachmanov@sifive.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-21riscv: booti: do not force relocation if force_reloc is not setVitaly Wool1-1/+6
If force_reloc flag is not set and booti is called for an address ouside RAM (i. e. QSPI NOR flash), we should honor that and not try to force relocation in a bogus fashion. Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-21board: sifive: remove the command for setting serial numberZong Li1-22/+1
We wouldn't like to allow user to change the serial number, so remove the command for changing serial number in EEPROM. Signed-off-by: Zong Li <zong.li@sifive.com> Suggested-by: David Abdurachmanov <david.abdurachmanov@sifive.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-21Merge branch 'master' of git://source.denx.de/u-boot-shTom Rini18-9/+378
- R-Car3 updates
2021-07-21ARM: dts: rmobile: Remove multiple unused DT properties on R-Car Gen3Marek Vasut6-0/+12
Filter out dmas dma-names interrupt-parent interrupts interrupts-extended interrupt-names interrupt-map interrupt-map-mask iommus DT properties on R-Car Gen3, since they are not used by U-Boot and only take space. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-07-21ARM: dts: rmobile: Disable RPC HF by defaultMarek Vasut8-8/+8
The RPC HF might be locked by ATF, and any access to its register space would result in complete hang. Disable the RPC HF by default. The ATF should be patched to set RPC node status = "okay" in the DT fragment it passes to U-Boot in case the RPC HF access is unlocked, and that way U-Boot could access the RPC HF safely. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-07-21ARM: rmobile: Align CPU: print with other printsMarek Vasut1-1/+1
The CPU: print only has one space after it, while the other prints from U-Boot align the value to offset 7. Align the CPU: print too. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-07-21ARM: rmobile: Enable sysinfo on R-Car Gen3Marek Vasut3-0/+3
Enable support for sysinfo on supported R-Car Gen3 boards. The sysinfo is used e.g. to access and decode board-specific information and then in turn used by board-info to print those information. On R-Car Gen3 the sysinfo rcar3 driver is used to parse the board ID EEPROM, obtain board type and revision from it, and let board-info print this information on boot. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-07-21ARM: rmobile: Enable I2C EEPROM support on R-Car Gen3Marek Vasut3-0/+21
Enable support for I2C EEPROM driver on supported Renesas R-Car Gen3 boards. This is useful for accessing the board ID EEPROM. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-07-21ARM: dts: rmobile: Add sysinfo extras on R-Car Gen3Marek Vasut7-0/+128
Add sysinfo node and phandle to the board ID EEPROM on all boards where this functionality is described in DT, which is Salvator-X(S), ULCB and Ebisu. The u-boot,dm-pre-reloc is necessary here, since the sysinfo must be available early during boot. The V3M and V3H boards currently do not describe this board ID EEPROM in upstream DT, but that could be easily added later, once the DTs contain the necessary nodes. ULCB and Ebisu needs the full EEPROM node in the u-boot extras DT, since the EEPROM node is still missing in the upstream DTs. Ebisu also needs extra compatible string override for the i2c_dvfs. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-07-21sysinfo: rcar3: Add Renesas R-Car Gen3 sysinfo driverMarek Vasut3-0/+205
The Renesas R-Car Gen3 development kits contain board ID EEPROM. This driver parses out the board ID and revision out of that EEPROM and exports it e.g. for the board-info print on boot. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Sean Anderson <sean.anderson@seco.com> Cc: Simon Glass <sjg@chromium.org>
2021-07-20configs: ls2080ardb.h: Update mc size in envPriyanka Jain1-6/+6
Set MC Firmware size in read commands in env to 2MB. Update DDR Memory read address for MC firmware to 0x80a00000 and MC DPC address to 0x80e00000. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20configs: ls2080aqds.h: Update mc size in envPriyanka Jain1-4/+4
Set MC Firmware size in read commands in env to 2MB. Update DDR Memory read address for MC firmware to 0x80a00000 and MC DPC address to 0x80e00000. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20configs: ls1088ardb.h: Update mc size in envPriyanka Jain1-12/+12
Set MC Firmware size in read commands in env to 2MB. Update DDR Memory read address for MC firmware to 0x80a00000 and MC DPC address to 0x80e00000. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20configs: ls1088aqds.h: Update mc size in envPriyanka Jain1-16/+16
Set MC Firmware size in read commands in env to 2MB. Update DDR Memory read address for MC firmware to 0x80a00000 and MC DPC address to 0x80e00000. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20configs: ls1043aqds: Configure environment related configsKuldeep Singh3-0/+3
LS1043A-QDS board requires updation in few environment configs in TFA and QSPI defconfigs. Following are the changes: - Define CONFIG_ENV_ADDR - Unset CONFIG_SPI_FLASH_BAR - Enable CONFIG_SYS_RELOC_GD_ENV_ADDR Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20board: freescale: LX2162AQDS: Add MAINTAINERWasim Khan1-0/+1
Add "Wasim Khan <wasim.khan@nxp.com>" as MAINTAINER for LX2162AQDS board Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20board: freescale: LX2160AQDS: Add MAINTAINERWasim Khan1-0/+1
Add "Wasim Khan <wasim.khan@nxp.com>" as MAINTAINER for LX2160AQDS board Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20board: freescale: LX2160ARDB: Add MAINTAINERWasim Khan1-0/+1
Add "Wasim Khan <wasim.khan@nxp.com>" as MAINTAINER for LX2160ARDB board Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20configs: ls1046ardb: enable PHY_FIXEDCamelia Groza8-0/+8
The optical 10G port is described as fixed-link in the device tree. Enable the necessary support. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20armv8: lx2160ardb: Add thermal node fixup for revc boardWasim Khan1-1/+120
lx2160ardb Rev-C board has i2c node for thermal monitors connected to different chip offset. Add device tree fixup to use lx2160ardb dts and apply thermal node fixups for lx2160ardb Rev-C board. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> [sp:thernal->thermal] Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-07-20arm: dts: ls1043ardb: configure the RGMII ports with rgmii-idCamelia Groza1-3/+3
The RGMII ports on LS1043ARDB platforms require both RX and TX internal delays to be enabled. The device tree reports only the TX ID because the RX ID used to be enabled by default. With the addition of RX ID support for the Realtek 8211F PHY driver in commit e32e4d0f58cb ("net: phy: realtek: add rx delay support for RTL8211F"), the RX ID is disabled by the driver if not reported explicitly. This causes the RX to no longer work. Change the phy-connection-type for the RGMII ports to "rgmii-id" in order to enable both RX and TX internal delays. Fixes: be1d75896996 ("ARM: dts: add QorIQ DPAA 1 FMan v3 to LS1043ARDB") Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 17:58:23 +0300