summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-08-11env: Move env_get() to env.hSimon Glass129-12/+139
Move env_get() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_set() to env.hSimon Glass181-12/+191
Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11env: Move env_get_hex() to env.hSimon Glass5-12/+15
Move env_get_hex() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_get_yesno() to env.hSimon Glass5-6/+11
Move env_get_yesno() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_get_ulong() to env.hSimon Glass9-13/+20
Move env_get_ulong() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_set_ulong() to env.hSimon Glass16-9/+23
Move env_set_ulong() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_set_hex() to env.hSimon Glass39-21/+59
Move env_set_hex() over to the new header file along with env_set_addr() which uses it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move envmatch() to env.hSimon Glass4-14/+15
Move envmatch() over to the new header file. Also rename it to env_match() to better line up with other functions. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_relocate() to env.hSimon Glass4-1/+10
Move env_relocate() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_init() to env.hSimon Glass19-1/+27
Move env_init() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move env_get_f() to env.hSimon Glass22-12/+32
Move this function over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Move get_env_id() to env.hSimon Glass5-7/+18
Move this function over to the new header file. Also rename it to have an env_ prefix like the other functions. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11env: Create a new file for environment functionsSimon Glass3-4/+29
At present we have environment.h but this file includes all the environment-related header files as well as internals such as default_environment. It seems desirable to have a new header to hold the commonly used environment functions, so that most files can avoid including all of this unnecessary stuff. Create a new env.h header and move one function over to it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-08-11common: Remove video_setmem()Simon Glass2-10/+0
This function is no-longer defined in U-Boot. Drop the declaration from common.h Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11common: Move lcd_setmem() to lcd.hSimon Glass3-3/+2
This function relates to lcd.h and is about to become obsolete with the driver-model conversion. Move it out of common.h Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11common: Drop the dpram_... functionsSimon Glass1-5/+0
These declarations are not used anymore, so drop them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-08-11common: Move gzip functions into a new gzip headerSimon Glass18-58/+124
As part of the effort to remove things from common.h, create a new header for the gzip functions. Move the function declarations to it and add missing documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-08-11MAINTAINERS: Add entries for Android A/B and AVBIgor Opaniuk1-0/+20
1. Add myself as Android A/B and AVB maintainer 2. Add Sam Protsenko as Designated reviewer for A/B Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
2019-08-11MAINTAINERS: Add entry for HI3660 SoCManivannan Sadhasivam1-0/+2
Add MAINTAINERS entry for HI3660 SoC by adding the arch includes. While doing so, adding myself as the co-maintainer for HISILICON SoCs since I'm planning to maintain HI3660 SoC separately and considering doing improvements to the existing HiSilicon SoC architecture. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-11mmc: Add support for HI3660 SoC reusing hi6220_dw_mmc driverManivannan Sadhasivam1-3/+26
This commit adds MMC driver support for HI3660 SoC reusing hi6220_dw_mmc driver. Since HI3660 operates at different clock rate and uses fifo mode now, let's introduce the platform data and utilize it for different SoCs supported by this driver. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-11board: hisilicon: Add support for Hikey960 boardManivannan Sadhasivam9-0/+612
This commit adds board support for Hikey960 board from Hisilicon. This board is one of the Consumer Edition boards of the 96Boards family powered by Kirin960 SoC. More information about this board can be found in 96Boards website: https://www.96boards.org/product/hikey960/ The initial supported/tested devices include: - Debug serial - SD With these support, it's good enough for loading Linux Kernel from SD. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-11arm: dts: Add devicetree for Hikey960 boardManivannan Sadhasivam3-0/+618
This commit adds devicetree for Hikey960 board. Most of the contents are copied from Linux kernel with some modifications for u-boot. To be more precise, SD card's speed related properties are removed due to a bug in u-boot clock implementation. Hence forcing the SD controller to work in standard speed. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-11arm: dts: Import HI3660 devicetree from LinuxManivannan Sadhasivam3-0/+2431
This commit imports HI3660 SoC devicetree from Linux Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-11spl: implement stack usage checkSimon Goldschmidt3-0/+64
This implements a stack usage check in SPL. Many boards start up SPL to run code + data from one common, rather small SRAM. To implement a sophisticated SPL binary size limit on such boards, the stack size (as well as malloc size and global data size) must be subtracted from this SRAM size. However, to do that properly, the stack size first needs to be known. This patch adds a new Kconfig option: - SPL_SYS_REPORT_STACK_F_USAGE: memset(0xaa) the whole area of the stack very early and check stack usage based on this constant later before the stack is switched to DRAM Initializing the stack and checking it is implemented in weak functions, in case a board does not use the stack as saved in gd->start_addr_sp. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-08-11serial_lpuart: Fix config check issue when using clk driver in SPLYe Li1-4/+4
Should use CONFIG_IS_ENABLED not IS_ENABLED for CLK driver, so it will check the CONFIG_SPL_CLK when building SPL Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-11pci: intel: Fix configuration type based on secondary numberLey Foon Tan1-4/+6
This fix issue when access config from PCIe switch. The PCIe controller need to send Type 0 config TLP if the targeting bus matches with the secondary bus number, which is when the TLP is targeting the immediate device on the link. The PCIe controller send Type 1 config TLP if the targeting bus is larger than the secondary bus, which is when the TLP is targeting the device not immediate on the link. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-08-11pci: intel: Fix error when enumerating multi-function PCIe deviceLey Foon Tan1-2/+4
Hardware return completion status non-zero when read from non exist function in multi-function PCIe device. Return error will cause PCIe enumeration fail. Change it to return 0 and return value 0xffffffff when error. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-08-11pci: intel: Increase TLP polling counterLey Foon Tan1-1/+1
Some PCIe devices require longer time to response. Increase polling counter to 20000 (~100ms). Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-08-11Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini26-21/+5477
- R8A77980 V3H support
2019-08-10Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini18-24/+537
- DaVinci USB updates - Various OHCI fixes - Gadget fixes
2019-08-10Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini53-619/+1573
- Enable SD slot on Intel Edison - Populate CSRT ACPI table for shared DMA controller on Intel Tangier - Convert Intel ICH-SPI driver to use new spi-mem ops - Enable config_distro_bootcmd for QEMU x86 - Support U-Boot as a payload for Intel Slim Bootloader - Avoid writing temporary asl files into the source tree which fixes the parallel build issue occasionally seen
2019-08-10ARM: renesas: Add R8A77980 V3H Condor board codeMarek Vasut10-0/+533
Add board code for the R8A77980 V3H Condor board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-10ARM: renesas: Add R8A77980 V3H platform codeMarek Vasut3-0/+7
Add a few bits of platform code to support R8A77980 V3H SoC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-10ARM: dts: renesas: Add R8A77980 V3H DTs and headersMarek Vasut4-0/+1723
Import R8A77980 V3H DTs and headers from Linux 5.2.7 , commit 5697a9d3d55f. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-10clk: renesas: Add R8A77980 V3H clock tablesMarek Vasut3-0/+262
Import R8A77980 V3H clock tables from Linux 5.2.7 , commit 5697a9d3d55f. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-10pinctrl: renesas: Add R8A77980 V3H PFC tablesMarek Vasut5-0/+2920
Import R8A77980 V3H PFC tables from Linux 5.2.7 , commit 5697a9d3d55f. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-10net: sh_eth: Fix 64bit build warningsMarek Vasut2-16/+16
Fix various type warnings when building this driver for 64bit machine. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-10net: sh_eth: Add R8A77980 V3H gether supportMarek Vasut2-5/+16
The R8A77980 V3H gether needs a few minor adjustments to the sh_eth driver, add them to support ethernet on R8A77980. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-09Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini15-116/+310
2019-08-09apalis-tk1: configs: remove legacy usbboot commandIgor Opaniuk1-19/+0
Remove obsolete legacy usbboot wrapper, as distroboot can handle booting from USB drivers. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09apalis-tk1: support v1.2 hardware revisionMarcel Ziswiler5-56/+103
Support the V1.2 hardware revision with the following pin muxing changes: Ddc_scl_pv4 and ddc_sda_pv5 previously used as Apalis GPIO3 and GPIO4 are now used as DDC pins. Gen2_i2c_scl_pt5 and gen2_i2c_sda_pt6 previously used as DDC pins are now used as USB power enable signals. Usb_vbus_en0_pn4 and usb_vbus_en1_pn5 previously used as USB power enable signals are now used as GPIO3 and GPIO4. Additionally a new device tree file tegra124-apalis-v1.2-eval.dtb is loaded on V1.2 and later modules and resp. USB power enable signals activated. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09apalis-tk1: remove non-essential power rails on bootDominik Sliwa2-0/+68
When mainline kernels reboot TK1 they use SW_RESET, that reset mode does not reset PMIC. Some rails need to be off for RAM Re-repair to work correctly. Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09apalis-tk1: remove default vesa vga mode from vidargsMarcel Ziswiler1-1/+1
Remove video=tegrafb0:640x480-16@60 aka VESA VGA mode from vidargs in order for the panel specification in the device tree to be used. This causes the default to be the 10.1" LVDS display which will be available in the Toradex webshop shortly. Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09apalis-tk1/t30: colibri_t30: display reset reasonDominik Sliwa1-10/+22
Display proper reset reason after the SoC info. Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09apalis-tk1: switch to zImageIgor Opaniuk1-6/+6
Switch to the generic compressed Kernel image type (zImage) instead of the U-Boot specific uImage format. Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09apalis-tk1: add pcie_aspm=off to defargsIgor Opaniuk1-1/+1
Disabling ASPM fixes incompatibilities with some PCIe cards Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09apalis-tk1: enable user debug by defaultIgor Opaniuk1-1/+2
Let the kernel print some debug messages when a user program crashes due to an exception. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09apalis-tk1: provide proper USB vendor idIgor Opaniuk1-1/+1
Use unified values for USB Product/Vendor numbers when the config block is missing Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09apalis-tk1: set apalis gpio 8 aka fan_enIgor Opaniuk1-0/+10
Make sure the Apalis GPIO 8 aka FAN_EN is on when using Apalis TK1 modules. Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2019-08-09apalis-tk1: do not explicitly release reset_moci#Marcel Ziswiler1-1/+1
By keeping RESET_MOCI_CTRL low we avoid explicitly releasing RESET_MOCI#. Please note that module hardware versions up to V1.1A will already release RESET_MOCI# in hardware coming out of reset. Please further note that with this change the USB hub on the Apalis Evaluation board is kept in reset in U-Boot and therefore none of its ports are operational in U-Boot. Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-19 16:11:24 +0300