board: arm: Add support for Broadcom BCM7445

Add support for loading U-Boot on the Broadcom 7445 SoC.  This port
assumes Broadcom's BOLT bootloader is acting as the second stage
bootloader, and U-Boot is acting as the third stage bootloader, loaded
as an ELF program by BOLT.

Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org>
Cc: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>

1 files changed, 150 insertions, 0 deletions

diff --git a/doc/README.bcm7xxx b/doc/README.bcm7xxx
new file mode 100644
index 0000000000..9b5eae4741
--- /dev/null
+++ b/doc/README.bcm7xxx
@@ -0,0 +1,150 @@
+Summary
+=======
+
+This document describes how to use U-Boot on the Broadcom 7445 SoC, as
+a third stage bootloader loaded by Broadcom's BOLT bootloader.
+
+BOLT loads U-Boot as a generic ELF binary.  Some U-Boot features such
+as networking are not yet available but other important features are,
+including:
+
+   - ext4 file system traversal
+
+   - support for loading FIT images
+
+   - advanced scripting
+
+   - support for FIT-provided DTBs instead of relying on the
+     BOLT-provided DTB
+
+A customized version of this port has been used in production.  The
+same approach may work on other BCM7xxx boards, with some
+configuration adjustments and memory layout experimentation.
+
+Build
+=====
+
+make bcm7445_defconfig
+make
+${CROSS_COMPILE}strip u-boot
+
+Run
+===
+
+Flash the u-boot binary into board storage, then invoke it from BOLT.
+For example:
+
+BOLT> boot -bsu -elf flash0.u-boot1
+
+This port assumes that I-cache and D-cache are already enabled when
+U-Boot is entered.
+
+Flattened Image Tree Support
+============================
+
+What follows is an example FIT image source file.  Build it with:
+
+mkimage -f image.its image.itb
+
+Booting the resulting image.itb was tested on BOLT v1.20, with the
+following kernels:
+
+https://github.com/Broadcom/stblinux-3.14
+https://github.com/Broadcom/stblinux-4.1
+https://github.com/Broadcom/stblinux-4.9
+
+and with a generic ARMv7 root file system.
+
+image.its:
+/dts-v1/;
+/ {
+	description = "BCM7445 FIT";
+	images {
+		kernel@1 {
+			description = "Linux kernel";
+			/*
+			 * This kernel image output format can be
+			 * generated with:
+			 *
+			 * make vmlinux
+			 * ${CROSS_COMPILE}objcopy -O binary -S vmlinux vmlinux.bin
+			 * gzip -9 vmlinux.bin
+			 *
+			 * For stblinux-3.14, the specific Broadcom
+			 * board type should be configured in the
+			 * kernel, for example CONFIG_BCM7445D0=y.
+			 */
+			data = /incbin/("<vmlinux.bin.gz>");
+			type = "kernel";
+			arch = "arm";
+			os = "linux";
+			compression = "gzip";
+			load = <0x8000>;
+			entry = <0x8000>;
+			hash@1 {
+				algo = "sha256";
+			};
+		};
+		ramdisk@1 {
+			description = "Initramfs root file system";
+			data = /incbin/("<initramfs.cpio.gz>");
+			type = "ramdisk";
+			arch = "arm";
+			os = "linux";
+			compression = "gzip";
+			/*
+			 * Set the environment variable initrd_high to
+			 * 0xffffffff, and set "load" and "entry" here
+			 * to 0x0 to keep initramfs in-place and to
+			 * accommodate stblinux bmem/CMA reservations.
+			 */
+			load = <0x0>;
+			entry = <0x0>;
+			hash@1 {
+				algo = "sha256";
+			};
+		};
+		fdt@1 {
+			description = "Device tree dumped from BOLT";
+			/*
+			 * This DTB should be similar to the
+			 * BOLT-generated device tree, after BOLT has
+			 * done its runtime modifications to it.  For
+			 * example, it can be dumped from within
+			 * U-Boot (at ${fdtcontroladdr}), after BOLT
+			 * has loaded U-Boot.  The result can be added
+			 * to the Linux source tree as a .dts file.
+			 *
+			 * To support modifications to the device tree
+			 * in-place in U-Boot, add to Linux's
+			 * arch/arm/boot/dts/Makefile:
+			 *
+			 * DTC_FLAGS ?= -p 4096
+			 *
+			 * This will leave some padding in the DTB and
+			 * thus reserve room for node additions.
+			 *
+			 * Also, set the environment variable fdt_high
+			 * to 0xffffffff to keep the DTB in-place and
+			 * to accommodate stblinux bmem/CMA
+			 * reservations.
+			 */
+			data = /incbin/("<bolt-<version>.dtb");
+			type = "flat_dt";
+			arch = "arm";
+			compression = "none";
+			hash@1 {
+				algo = "sha256";
+			};
+		};
+	};
+	configurations {
+		default = "conf@bcm7445";
+		conf@bcm7445 {
+			description = "BCM7445 configuration";
+			kernel = "kernel@1";
+			ramdisk = "ramdisk@1";
+			fdt = "fdt@1";
+		};
+	};
+};