starfive-tech/u-boot.git/test/dm/Makefile, branch rtthread_AMP

pci: Drop DM_PCI

2021-09-13T22:23:13+00:00

This option has not effect now. Drop it, using PCI instead where needed. Signed-off-by: Simon Glass

test: dm: Add test for ECDSA UCLASS support

2021-08-16T08:49:35+00:00

This test verifies that ECDSA_UCLASS is implemented, and that ecdsa_verify() works as expected. The definition of "expected" is "does not find a device, and returns -ENODEV". The lack of a hardware-independent ECDSA implementation prevents us from having one in the sandbox, for now. Signed-off-by: Alexandru Gagniuc Reviewed-by: Simon Glass Reviewed-by: Patrick Delaunay

reboot-mode: read the boot mode from GPIOs status

2021-07-23T14:16:39+00:00

A use case for controlling the boot mode is when the user wants to control the device boot by pushing a button without needing to go in user-space. Add a new backed for reboot mode where GPIOs are used to control the reboot-mode. The driver is able to scan a predefined list of GPIOs and return the magic value. Having the modes associated with the magic value generated based on the GPIO values, allows the reboot mode uclass to select the proper mode. Signed-off-by: Nandor Han Reviewed-by: Simon Glass

sandbox: cros-ec: Add tests for the Chromium OS EC PWM driver

2021-07-06T16:38:03+00:00

This patch adds a limited pulse-width modulator to sandbox's Chromium OS Embedded Controller emulation. The emulated PWM device supports multiple channels but can only set a duty cycle for each, as the actual EC doesn't expose any functionality or information other than that. Though the EC supports specifying the PWM channel by its type (e.g. display backlight, keyboard backlight), this is not implemented in the emulation as nothing in U-Boot uses this type specification. This emulated PWM device is then used to test the Chromium OS PWM driver in sandbox. Adding the required device node to the sandbox test device-tree unfortunately makes it the first PWM device, so this also touches some other tests to make sure they still use the sandbox PWM. Signed-off-by: Alper Nebi Yasak Reviewed-by: Simon Glass

test: Add gpio-sysinfo test

2021-05-04T11:57:18+00:00

This adds a test for the gpio-sysinfo driver. Signed-off-by: Sean Anderson Reviewed-by: Simon Glass

test: Add test for partitions

2021-04-22T18:09:45+00:00

This is technically a library function, but we use MMCs for testing, so it is easier to do it with DM. At the moment, the only block devices in sandbox are MMCs (AFAIK) so we just test with those. Signed-off-by: Sean Anderson

test: Alphabetize dm Makefile

2021-04-22T15:44:37+00:00

Recently, tests have been added primarily to the end of the dm Makefile. This results in merge conflicts when two people add new tests at the same time. To reduce these conflicts, alphabetize the makefile. Signed-off-by: Sean Anderson

test: dm: Add a test case for simple-bus

2021-04-15T08:52:17+00:00

This adds a test case to verify reading of a simple-bus is working as expected. Signed-off-by: Bin Meng Reviewed-by: Simon Glass Reviewed-by: Priyanka Jain

sandbox: Add a DSA sandbox driver and unit test

2021-04-15T08:52:17+00:00

The DSA sandbox driver is used for unit testing the DSA class code. It implements a simple 2 port switch plus 1 CPU port, and uses a very simple tag to identify the ports. The DSA sandbox device is connected via CPU port to a regular Ethernet sandbox device, called 'dsa-test-eth, managed by the existing eth sandbox driver. The 'dsa-test-eth' is not intended for testing the eth class code however, but it is used to emulate traffic through the 'lan0' and 'lan1' front pannel switch ports. To achieve this the dsa sandbox driver registers a tx handler for the 'dsa-test-eth' device. The switch ports, labeled as 'lan0' and 'lan1', are also registered as eth devices by the dsa class code this time. So pinging through these switch ports is as easy as: => setenv ethact lan0 => ping 1.2.3.5 Unit tests for the dsa class code were also added. The 'dsa_probe' test exercises most API functions from dsa.h. The 'dsa' unit test simply exercises ARP/ICMP traffic through the two switch ports, including tag injection and extraction, with the help of the dsa sandbox driver. I took care to minimize the impact on the existing eth unit tests, though some adjustments needed to be made with the addition of extra eth interfaces used by the dsa unit tests. The additional eth interfaces also require MAC addresses, these have been added to the sandbox default environment. Signed-off-by: Alex Marginean Signed-off-by: Claudiu Manoil Reviewed-by: Simon Glass Signed-off-by: Vladimir Oltean Message-Id: <20210216224804.3355044-5-olteanv@gmail.com> Signed-off-by: Bin Meng Reviewed-by: Priyanka Jain

test: qemu: add qfw sandbox driver, dm tests, qemu tests

2021-04-12T21:45:39+00:00

A sandbox driver and test are added for the qfw uclass, and a test in QEMU added for qfw functionality to confirm it doesn't break in real world use. Signed-off-by: Asherah Connor Reviewed-by: Simon Glass Reviewed-by: Bin Meng