<feed xmlns='http://www.w3.org/2005/Atom'>
<title>starfive-tech/u-boot.git/include/configs/condor.h, branch rtthread_AMP</title>
<subtitle>StarFive Tech U-Boot for VisionFive (JH7110) boards (mirror)</subtitle>
<id>https://git.radix-linux.su/starfive-tech/u-boot.git/atom?h=rtthread_AMP</id>
<link rel='self' href='https://git.radix-linux.su/starfive-tech/u-boot.git/atom?h=rtthread_AMP'/>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/starfive-tech/u-boot.git/'/>
<updated>2020-04-28T19:57:58+00:00</updated>
<entry>
<title>Convert CONFIG_PHYLIB et al to Kconfig</title>
<updated>2020-04-28T19:57:58+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2020-04-24T19:35:53+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/starfive-tech/u-boot.git/commit/?id=306881a0bfca22798da64f55206ef2824f37efed'/>
<id>urn:sha1:306881a0bfca22798da64f55206ef2824f37efed</id>
<content type='text'>
This converts the following to Kconfig:
   CONFIG_PHYLIB
   CONFIG_BITBANGMII
   CONFIG_MV88E6352_SWITCH
   CONFIG_MV88E61XX_SWITCH
   CONFIG_PHYLIB_10G
   CONFIG_PHY_AQUANTIA
   CONFIG_PHY_ATHEROS
   CONFIG_PHY_BROADCOM
   CONFIG_PHY_CORTINA
   CONFIG_PHY_DAVICOM
   CONFIG_PHY_ET1011C
   CONFIG_PHY_LXT
   CONFIG_PHY_MARVELL
   CONFIG_PHY_MICREL
   CONFIG_PHY_NATSEMI
   CONFIG_PHY_REALTEK
   CONFIG_RTL8211X_PHY_FORCE_MASTER
   CONFIG_PHY_SMSC
   CONFIG_PHY_TERANETICS
   CONFIG_PHY_TI
   CONFIG_PHY_VITESSE
   CONFIG_PHY_XILINX

Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
</entry>
<entry>
<title>env: Finish migration of common ENV options</title>
<updated>2019-11-20T23:32:09+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2019-11-19T01:02:10+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/starfive-tech/u-boot.git/commit/?id=a09fea1d28fe3c69a64bee092f5a764274d26ca2'/>
<id>urn:sha1:a09fea1d28fe3c69a64bee092f5a764274d26ca2</id>
<content type='text'>
- In ARMv8 NXP Layerscape platforms we also need to make use of
  CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
  to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
  SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
  for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
  rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
  CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
  ENV_IS_IN_FLASH.
- Migrate all platforms.

Cc: Wolfgang Denk &lt;wd@denx.de&gt;
Cc: Joe Hershberger &lt;joe.hershberger@ni.com&gt;
Cc: Patrick Delaunay &lt;patrick.delaunay@st.com&gt;
Cc: uboot-stm32@st-md-mailman.stormreply.com
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
Acked-by: Joe Hershberger &lt;joe.hershberger@ni.com&gt;
Reviewed-by: Simon Goldschmidt &lt;simon.k.r.goldschmidt@gmail.com&gt;
</content>
</entry>
<entry>
<title>env: Remove useless CONFIG_ENV_SIZE_REDUND and fix ENV_IS_REDUND check</title>
<updated>2019-11-20T23:31:24+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2019-11-19T01:02:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/starfive-tech/u-boot.git/commit/?id=a8992e788aba46f6f129af3111682be86236074f'/>
<id>urn:sha1:a8992e788aba46f6f129af3111682be86236074f</id>
<content type='text'>
We have CONFIG_ENV_SIZE_IS_REDUND but don't really use it.  We have one
board where we can simply multiple CONFIG_ENV_SIZE by two for the same
result.  The other place where we could but were not previously using
this is for where env_internal.h checks for if we should set
ENV_IS_EMBEDDED.  This seems like the most likely use, historically, of
the variable, but it was not used.  Add logic to check for this now.

Cc: Wolfgang Denk &lt;wd@denx.de&gt;
Cc: Joe Hershberger &lt;joe.hershberger@ni.com&gt;
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
Acked-by: Joe Hershberger &lt;joe.hershberger@ni.com&gt;
</content>
</entry>
<entry>
<title>ARM: renesas: Add R8A77980 V3H Condor board code</title>
<updated>2019-08-09T21:15:01+00:00</updated>
<author>
<name>Marek Vasut</name>
<email>marek.vasut+renesas@gmail.com</email>
</author>
<published>2019-07-29T17:59:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/starfive-tech/u-boot.git/commit/?id=3ebb91914f4831df4db42675c4dd1f9a0b7548c7'/>
<id>urn:sha1:3ebb91914f4831df4db42675c4dd1f9a0b7548c7</id>
<content type='text'>
Add board code for the R8A77980 V3H Condor board.

Signed-off-by: Marek Vasut &lt;marek.vasut+renesas@gmail.com&gt;
Cc: Nobuhiro Iwamatsu &lt;iwamatsu@nigauri.org&gt;
</content>
</entry>
</feed>
