starfive-tech/u-boot.git/drivers/watchdog/Makefile, branch rtthread_AMPStarFive Tech U-Boot for VisionFive (JH7110) boards (mirror)https://git.radix-linux.su/starfive-tech/u-boot.git/atom?h=rtthread_AMP2021-04-15T08:52:17+00:00watchdog: Add booke watchdog driver2021-04-15T08:52:17+00:00Chris Packhamjudge.packham@gmail.com2021-03-05T03:32:58+00:00urn:sha1:017af7f71ae6e2943027f4ce44b51fd36cd89c39
Add a driver for the PowerPC Book E watchdog driver that is present on a
number of Freescale/NXP SoCs.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
watchdog: add watchdog driver for MediaTek MT7620 SoC2021-01-24T20:39:26+00:00Weijie Gaoweijie.gao@mediatek.com2020-11-12T08:36:28+00:00urn:sha1:bba4ec81fd68c90a7391dfdce0f651d91019396e
This patch adds watchdog support for the Mediatek MT7620 SoC
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
wdt: aspeed: Add AST2600 watchdog support2021-01-18T20:23:05+00:00Chia-Wei, Wangchiawei_wang@aspeedtech.com2020-12-14T05:54:25+00:00urn:sha1:337d95c4aa200979181c06ca53e3b45b77655ecf
AST2600 has 8 watchdog timers including 8 sets of
32-bit decrement counters, based on 1MHz clock.
A 64-bit reset mask is also supported to specify
which controllers should be reset by the WDT reset.
Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
watchdog: Add reset support for OcteonTX / TX22020-08-25T06:01:16+00:00Suneel Garapatisgarapati@marvell.com2019-10-21T23:09:36+00:00urn:sha1:af6ba90048afb4e0db3ff2480364286f230f8b91
Adds support for Core 0 watchdog poke on OcteonTX and OcteonTX2
platforms.
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
watchdog: Add support for K3 RTI watchdog2020-08-11T04:48:27+00:00Jan Kiszkajan.kiszka@siemens.com2020-06-23T11:15:08+00:00urn:sha1:d388f360edacf6292a5ee7a37474799a3fe9f2ac
This is based on the Linux kernel driver for the RTI watchdog.
To actually reset the system on an AM65x, it requires firmware running
on the R5 that accepts the NMI and issues the actual system reset via
TISCI. Kind of an iTCO, except that this watchdog hardware has support
for no-way-out, and only for that.
On the J721E, reset works without extra firmware help when routing the
RTI interrupt via the ESM.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Watchdog: introduce ARM SBSA watchdog driver2020-07-27T08:54:15+00:00Zhao Qiangqiang.zhao@nxp.com2020-07-10T08:55:18+00:00urn:sha1:f27d73e941525cab15682f2aea1673f5f943a128
According to Server Base System Architecture (SBSA) specification,
the SBSA Generic Watchdog has two stage timeouts: the first signal
(WS0) is for alerting the system by interrupt, the second one (WS1) is a
real hardware reset.
More details about the hardware specification of this device:
ARM DEN0029B - Server Base System Architecture (SBSA)
This driver can operate ARM SBSA Generic Watchdog as a single stage
In the single stage mode, when the timeout is reached, your system
will be reset by WS1. The first signal (WS0) is ignored.
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
watchdog: versal: Add support for Xilinx window watchdog2020-04-06T10:52:45+00:00Ashok Reddy Somaashok.reddy.soma@xilinx.com2020-03-11T09:06:04+00:00urn:sha1:5028358a6a5c3e7fd2d20b190a4205ba3e136ab8
Add support for Xilinx window watchdog, which can be found on
Versal platforms.
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Reviewed-by: Stefan Roese <sr@denx.de>
watchdog: cortina_wdt: add support for HW WDT on CAxxxx SoCs2020-02-07T21:15:57+00:00Jason Lijason.li@cortina-access.com2020-01-30T20:34:57+00:00urn:sha1:7f54b83870717180a4a019460ddf3bb839d15d17
Add support for hardware watchdog timer on all Cortina Access
CAxxxx family of SoCs.
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Jason Li <jason.li@cortina-access.com>
Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
watchdog: omap_wdt: Convert watchdog driver to use DT and DM2019-08-12T11:25:22+00:00Suniel Maheshsunil.m@techveda.org2019-07-31T16:24:06+00:00urn:sha1:7659ea32a6e99c4880ee38df90522876490788ad
This patch adds device tree and driver model watchdog support,
converts the legacy omap watchdog driver to driver model for
TI AM335x chipsets. The following compile warning is removed:
===================== WARNING ======================
This board does not use CONFIG_WDT (DM watchdog support).
Please update the board to use CONFIG_WDT before the
v2019.10 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/MIGRATION.txt for more info.
====================================================
CONFIG_HW_WATCHDOG is no more a default option for AM33XX devices
after DT/DM conversion, adjusted kconfig accordingly.
DM watchdog support is enabled by default in SPL. The SPL image
doesn't fit into SRAM because of size constraints and build breaks
with an overflow. For this reason DM watchdog support should be
disabled in SPL, driver code should be adjusted accordingly to serve
this purpose.
Built and tested on AM335x device (BeagleboneBlack), compile tested
for all other AM33xx based boards.
Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
watchdog: bcm2835_wdt: Remove unused BCM283x watchdog driver and its references2019-08-05T09:50:06+00:00Stefan Roesesr@denx.de2019-05-10T12:26:57+00:00urn:sha1:c7adc0b5f9809bddb3707f2383924d22af8b586f
The BCM2835/2836 watchdog is not used in mainline U-Boot at all. This
patch removes the driver and its references (CONFIG_BCM2835_WDT)
completely.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Paolo Pisati <p.pisati@gmail.com>