starfive-tech/u-boot.git/drivers/usb/gadget, branch rtthread_AMP

global: Convert simple_strtoul() with decimal to dectoul()

2021-08-02T17:32:14+00:00

It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass

usb: Enforce DM_USB migration for USB_HOST devices.

2021-07-19T01:05:31+00:00

As the deadline for migration to DM_USB, when using a USB host controller has now gone two years past the deadline, enforce migration. This is done by: - Ensuring that all host controller options (other than the very legacy old MUSB ones) now select USB_HOST. USB_HOST now enforces DM_USB and OF_CONTROL. - Remove other parts of Kconfig logic that had platforms pick DM_USB. - To keep Kconfig happy, have some select statements test for USB_HOST as well. - Re-order some Kconfig entries and menus so that we can cleanly pick host or gadget roles. For the various HCD options that have platform glue options, group them together and update dependencies in some cases. - As SPL_DM_USB is not required, on platforms that had not yet enabled it, disable it. Cc: Marek Vasut Cc: Icenowy Zheng Cc: Samuel Holland Cc: FUKAUMI Naoki Cc: Andre Przywara Cc: Jagan Teki Signed-off-by: Tom Rini

dm: define LOG_CATEGORY for all uclass

2021-07-06T16:38:03+00:00

Define LOG_CATEGORY for all uclass to allow filtering with log command. Signed-off-by: Patrick Delaunay Reviewed-by: Simon Glass

usb: Return -ENOSYS when system call is not available

2021-04-06T04:33:19+00:00

Update usb_gadget_release() to use -ENOSYS, which is the correct error code for U-Boot. Signed-off-by: Simon Glass

usb: gadget: Use dbg_ep0() macro instead of serial_printf()

2021-03-03T03:12:46+00:00

All debug messages from ep0.c except a few are printed by dbg_ep0() macro. So for remaining few exceptions use also dbg_ep0() instead of serial_printf(). Signed-off-by: Pali Rohár Reviewed-by: Lukasz Majewski Acked-by: Pavel Machek

usb: gadget: dwc2_udc_otg: Fix dwc2_gadget_start() and usb_gadget_register_driver()

2021-02-26T14:30:55+00:00

Since commit 8745b9ebccae ("usb: gadget: add super speed support") ums was no more functional on platform which use dwc2_udc_otg driver. This was due to a too restrictive test which checked that the gadget driver speed was either FS or HS. So all gadget driver with max speed set to speed higher than HS (SS in case of composite gadget driver in our case) are not allowed, which is wrong. Update the speed test in usb_gadget_register_driver() and in dwc2_gadget_start() to allow all gadget driver speed equal or higher than FS. Tested on stm32mp157c-ev1 board. Fixes: c791c8431c34 ("usb: dwc2: convert driver to DM_USB_GADGET") Signed-off-by: Patrice Chotard

fastboot: add UUU command UCmd and ACmd support

2021-02-26T14:30:55+00:00

add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher Acked-by: Patrick Delaunay

usb: dwc2: change compatible st,stm32mp1-hsotg to st,stm32mp15-hsotg

2021-02-10T21:23:35+00:00

The Linux kernel v5.7-rc1 introduced the compatible "st,stm32mp15-hsotg". See Linux kernel commit d49850110434 ("dt-bindings: usb: dwc2: add support for STM32MP15 SoCs USB OTG HS and FS") This patch updates the supported compatible in DWC2 driver, removes the add-on done in U-Boot dtsi and keeps the compatible defined in SOC dtsi arch/arm/dts/stm32mp151.dtsi: usbotg_hs: usb-otg@49000000 { compatible = "st,stm32mp15-hsotg", "snps,dwc2"; reg = <0x49000000 0x10000>; ... }; Signed-off-by: Patrick Delaunay

usb: gaget: ci: set ep's desc when enable ep

2021-01-31T13:08:56+00:00

As we need standard usb_ep's desc, so set it when enable ep. Reviewed-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Peng Fan

usb: gadget: fastboot: use correct max packet size

2021-01-31T13:08:56+00:00

Change to use wMaxPacketSize of current speed EP desc for request length wrap up. Reviewed-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Peng Fan