starfive-tech/u-boot.git/drivers/net, branch rtthread_AMPStarFive Tech U-Boot for VisionFive (JH7110) boards (mirror)https://git.radix-linux.su/starfive-tech/u-boot.git/atom?h=rtthread_AMP2023-11-29T02:54:34+00:00net: phy: motorcomm: Move ytphy_of_config function call to startup function2023-11-29T02:54:34+00:00Yanhong Wangyanhong.wang@starfivetech.com2023-03-24T02:28:48+00:00urn:sha1:4542b17102eac99de0eb8801392dfe57c30225d0
In order to dynamically adjust the phy clock delay configuration, so
move ytphy_of_config function call to startup function.
Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
net: dwc_eth_qos: Add StarFive VisionFive 2 board support2023-11-29T02:48:06+00:00Hal Fenghal.feng@starfivetech.com2023-08-17T03:08:07+00:00urn:sha1:3dec8563acd3be6580467ab856c21907b8865e1f
Make the code be compatible with the StarFive VisionFive 2 board.
The code is ported from tag JH7110_VF2_515_v3.9.3 of VF2 repo.
Signed-off-by: Samin Guo <samin.guo@linux.starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
net: phy: motorcomm: add Pad Drive Strength Cfg2023-04-20T01:23:25+00:00Samin Guosamin.guo@starfivetech.com2023-04-17T11:35:45+00:00urn:sha1:b6aaea9aadcf447fe3845b82f9668d8acd9434e5
YT8531 supports Pad Drive Strength configuration.
Including rx_data/rx_clk, etc.
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
net: rtl8169: Add one more device ID2023-02-22T09:54:41+00:00Mason Huomason.huo@starfivetech.com2023-02-01T03:20:45+00:00urn:sha1:73afdb850175bc365c786d9dbf027c9143f51c21
Add the NIC device ID and adjust the bar regions.
Signed-off-by: Mason Huo <mason.huo@starfivetech.com>
net:phy:motorcomm: Support modifying RGMII_TX_CLK delay train from dts2022-11-01T01:38:54+00:00Samin Guosamin.guo@starfivetech.com2022-11-01T01:38:54+00:00urn:sha1:fe0ba7e18ed6fddfa4fe22e93cb1827d7a73a7a7
support use original or inverted RGMII_TX_CLK delay train.
10M/100M/1000M can be configured independently.
tx_inverted_xx = val;
For example:
&gmac0 {
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@0 {
tx_inverted_10 = <0>;
tx_inverted_100 = <1>;
tx_inverted_1000 = <1>;
};
};
0: original (default)
1: inverted
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
net:phy:YUTAI: change tx delay config2022-10-18T08:24:36+00:00yanhong.wangyanhong.wang@starfivetech.com2022-05-23T10:40:53+00:00urn:sha1:b239f16521b95137a46d6bfb59d8214da3f0620b
Modify the tx delay configuration.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
net:dwc_eth_qos:starfive: remove phy-reset-gpio set2022-10-18T08:24:35+00:00yanhong.wangyanhong.wang@starfivetech.com2022-05-16T11:54:11+00:00urn:sha1:87549bf09316b49ec19e7e9c289d6138deb3de1c
Phy-reset-gpio set is unused in JH7110
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
net: dwc_eth_qos:starfive: update clk init2022-10-18T08:24:35+00:00yanhong.wangyanhong.wang@starfivetech.com2022-05-14T08:40:59+00:00urn:sha1:db61964dc2ecbbc9fb7fb89f0eed597b4429c82f
Modify the clk init code for StarFive JH7110 platform.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
net:phy:YUTAI: Add delay chain2022-10-18T08:24:35+00:00yanhong.wangyanhong.wang@starfivetech.com2022-05-14T06:41:37+00:00urn:sha1:f785501c47181e5918e8464edfedfee3a1c43566
Add tx/rx delay chain for YUTAI 8521
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
net:phy:YUTAI: Add YT8511/yt8521 phy init2022-10-18T08:24:34+00:00yanhong.wangyanhong.wang@starfivetech.com2022-05-07T03:06:41+00:00urn:sha1:17a76df9975a5cf1dfad3cd02c9fd7aa49471001
Add phy init for YUTAI YT8511/YT8521.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>