starfive-tech/u-boot.git/drivers/net/phy, branch rtthread_AMPStarFive Tech U-Boot for VisionFive (JH7110) boards (mirror)https://git.radix-linux.su/starfive-tech/u-boot.git/atom?h=rtthread_AMP2023-11-29T02:54:34+00:00net: phy: motorcomm: Move ytphy_of_config function call to startup function2023-11-29T02:54:34+00:00Yanhong Wangyanhong.wang@starfivetech.com2023-03-24T02:28:48+00:00urn:sha1:4542b17102eac99de0eb8801392dfe57c30225d0
In order to dynamically adjust the phy clock delay configuration, so
move ytphy_of_config function call to startup function.
Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
net: phy: motorcomm: add Pad Drive Strength Cfg2023-04-20T01:23:25+00:00Samin Guosamin.guo@starfivetech.com2023-04-17T11:35:45+00:00urn:sha1:b6aaea9aadcf447fe3845b82f9668d8acd9434e5
YT8531 supports Pad Drive Strength configuration.
Including rx_data/rx_clk, etc.
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
net:phy:motorcomm: Support modifying RGMII_TX_CLK delay train from dts2022-11-01T01:38:54+00:00Samin Guosamin.guo@starfivetech.com2022-11-01T01:38:54+00:00urn:sha1:fe0ba7e18ed6fddfa4fe22e93cb1827d7a73a7a7
support use original or inverted RGMII_TX_CLK delay train.
10M/100M/1000M can be configured independently.
tx_inverted_xx = val;
For example:
&gmac0 {
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@0 {
tx_inverted_10 = <0>;
tx_inverted_100 = <1>;
tx_inverted_1000 = <1>;
};
};
0: original (default)
1: inverted
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
net:phy:YUTAI: change tx delay config2022-10-18T08:24:36+00:00yanhong.wangyanhong.wang@starfivetech.com2022-05-23T10:40:53+00:00urn:sha1:b239f16521b95137a46d6bfb59d8214da3f0620b
Modify the tx delay configuration.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
net:phy:YUTAI: Add delay chain2022-10-18T08:24:35+00:00yanhong.wangyanhong.wang@starfivetech.com2022-05-14T06:41:37+00:00urn:sha1:f785501c47181e5918e8464edfedfee3a1c43566
Add tx/rx delay chain for YUTAI 8521
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
net:phy:YUTAI: Add YT8511/yt8521 phy init2022-10-18T08:24:34+00:00yanhong.wangyanhong.wang@starfivetech.com2022-05-07T03:06:41+00:00urn:sha1:17a76df9975a5cf1dfad3cd02c9fd7aa49471001
Add phy init for YUTAI YT8511/YT8521.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
net:phy:YUTAI: Add YT8511/yt8521 phy driver2022-10-18T08:24:34+00:00yanhong.wangyanhong.wang@starfivetech.com2022-04-28T05:52:25+00:00urn:sha1:66ede3957c034d69fbbc24d22c19701c68b42cbf
This adds basic support for YUTAI YT8511/YT8521 phy.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
net:phy: add 10/100M register configuration2022-10-18T08:24:34+00:00yanhong.wangyanhong.wang@starfivetech.com2022-04-18T03:29:19+00:00urn:sha1:dffb8ea8dd2860bb06e173e9f48f3f14b3b606f7
Support 10/100M configuration.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
net: cortina: Add support for tfa boot in cortina firmware2021-08-18T10:25:15+00:00Kuldeep Singhkuldeep.singh@nxp.com2021-08-10T05:50:08+00:00urn:sha1:5528c90e2dd801c35e0c7a4c9deb84f37d15ca08
Add support for boards supporting TFA boot separately in cortina
firmware. Please note, a weak function is defined to retrieve firmware
address values as CONFIG_CORTINA_FW_ADDR is now defined in defconfig and
can only have one possible value defined. This weak function will help
in overwrting the values to get proper addresses as per boot source.
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
configs: Migrate CORTINA_FW_ADDR and CORTINA_FW_LENGTH to Kconfig2021-08-18T10:25:15+00:00Kuldeep Singhkuldeep.singh@nxp.com2021-08-10T05:50:07+00:00urn:sha1:e99b1dfcb78229845058c8045031a9508813e0d7
Use moveconfig.py script to convert below defines to Kconfig and move
these entries to defconfigs.
CONFIG_CORTINA_FW_ADDR
CONFIG_CORTINA_FW_LENGTH
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>