starfive-tech/u-boot.git/drivers/clk/rockchip, branch rtthread_AMP

rockchip: px30: Support configure SFC

2021-08-12T01:34:11+00:00

Make px30 SFC clock configurable Signed-off-by: Jon Lin Reviewed-by: Jagan Teki Reviewed-by: Kever Yang

rockchip: rk3568: add clock driver

2021-06-18T06:36:06+00:00

Add rk3568 clock driver and cru structure definition. Signed-off-by: Elaine Zhang Reviewed-by: Kever Yang

clk: Allow force setting clock defaults before relocation

2021-06-17T01:40:57+00:00

Since 291da96b8e ("clk: Allow clock defaults to be set during re-reloc state for SPL only") it has been impossible to set clock defaults before relocation. This is annoying on boards without SPL, since there is no way to set clock defaults before U-Boot proper. In particular, the aisram rate must be changed before relocation on the K210, since U-Boot will hang if we try and change the rate while we are using aisram. To get around this, extend the stage parameter to allow force setting defaults, even if they would be otherwise postponed for later. A device tree property was decided against because of the concerns in the original commit thread about the overhead of repeatedly parsing the device tree. Signed-off-by: Sean Anderson Reviewed-by: Simon Glass

common: Drop asm/global_data.h from common header

2021-02-02T20:33:42+00:00

Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include at all, so remove that include. Signed-off-by: Simon Glass Signed-off-by: Tom Rini

dm: Use access methods for dev/uclass private data

2021-01-05T19:24:40+00:00

Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass Acked-by: Andy Shevchenko Acked-by: Pratyush Yadav

dm: treewide: Rename ofdata_to_platdata() to of_to_plat()

2020-12-13T23:51:09+00:00

This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass

dm: treewide: Rename dev_get_platdata() to dev_get_plat()

2020-12-13T23:51:09+00:00

Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass

dm: treewide: Rename 'platdata' variables to just 'plat'

2020-12-13T23:51:08+00:00

We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass

dm: treewide: Rename auto_alloc_size members to be shorter

2020-12-13T15:00:25+00:00

This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass

rockchip: rk3399: Init clocks in U-Boot proper if SPL was not run

2020-11-13T10:15:08+00:00

It's possible to chainload U-Boot proper from the vendor firmware in rk3399 chromebooks, but the way the vendor firmware sets up clocks is somehow different than what U-Boot expects. This causes the display to stay devoid of content even though vidconsole claims to work (with patches in process of being upstreamed). This is meant to be a rk3399 version of commit d3cb46aa8c41 ("rockchip: Init clocks again when chain-loading") which can detect the discrepancy, but this patch instead checks whether SPL (and therefore the clock init) was run via the handoff functionality and runs the init if it was not. Signed-off-by: Alper Nebi Yasak Reviewed-by: Simon Glass Reviewed-by: Kever Yang