starfive-tech/u-boot.git/common/miiphyutil.c, branch rtthread_AMP

common: Drop linux/delay.h from common header

2020-05-19T01:19:23+00:00

Move this uncommon header out of the common header. Signed-off-by: Simon Glass

common: Drop log.h from common header

2020-05-19T01:19:18+00:00

Move this header out of the common header. Signed-off-by: Simon Glass

miiphy: Add function to retrieve MDIO bus list head

2018-10-24T19:45:36+00:00

In upcoming freescale board LX2160AQDS, the MDIO bus is muxed. i.e. same MDIO bus can be routed to eight different slots depending on mux register settings. To support this mdio mux behavior, we add each MDIO bus mux as a separate MDIO bus. Now, various phy devices can be attached to each of these slots(mux). The information about these devices is passed to OS via device tree. To do the fdt fixups related to MDIO bus, its necessary that MDIO bus list is accessed.Therefore, add a function to retrieve the list head. Signed-off-by: Pankaj Bansal Acked-by: Joe Hershberger

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

common: miiphyutil: Add helper function for mdio bus name

2016-12-20T06:40:04+00:00

Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze"

2016-12-09T12:56:54+00:00

This reverts commit 3edc0c252257e4afed163a3a74aba24a5509b198, reversing changes made to bb135a0180c31fbd7456021fb9700b49bba7f533.

common: miiphyutil: Add helper function for mdio bus name

2016-12-08T09:25:17+00:00

The most of ethernet drivers are using this mdio registration sequence. strcpy(priv->bus->name, "emac"); mdio_register(priv->bus); Where driver can be used only with one MDIO bus because only unique name should be used. Other drivers are using unique device name for MDIO registration to support multiple instances. snprintf(priv->bus->name, sizeof(bus->name), "%s", name); With DM dev->seq is used more even in logs (like random MAC address generation: printf("\nWarning: %s (eth%d) using random MAC address - %pM\n", dev->name, dev->seq, pdata->enetaddr); ) where eth%d prefix is used. Simplify driver code to register mdio device with dev->seq number to simplify mdio registration and reduce code duplication across all drivers. With DM_SEQ_ALIAS enabled dev->seq reflects alias setting. Signed-off-by: Michal Simek --- For example: Board: Xilinx Zynq Net: ZYNQ GEM: e000b000, phyaddr 7, interface rgmii-id Warning: ethernet@e000b000 (eth0) using random MAC address - 7a:fc:90:53:6a:41 eth0: ethernet@e000b000ZYNQ GEM: e000c000, phyaddr ffffffff, interface rgmii-id Warning: ethernet@e000c000 (eth3) using random MAC address - 1a:ff:d7:1a:a1:b2 , eth3: ethernet@e000c000 ** Bad device size - mmc 0 ** Checking if uenvcmd is set ... Hit any key to stop autoboot: 0 Zynq> mdio list eth0: 17 - Marvell 88E1111S <--> ethernet@e000b000 eth3: 17 - Marvell 88E1111S <--> ethernet@e000c000 Zynq>

common: miiphyutil: Work and report phy address in hex in mdio cmd

2016-12-02T13:36:02+00:00

It is confusing that mdio commands work and report phy id as decimal value when mii is working with hex values. For example: ZynqMP> mdio list gem: 21 - TI DP83867 <--> ethernet@ff0e0000 ZynqMP> mdio read ethernet@ff0e0000 0 Reading from bus gem PHY at address 21: 0 - 0x1140 ZynqMP> mii dump 21 0 Incorrect PHY address. Range should be 0-31 ... ZynqMP> mii dump 15 0. (1140) -- PHY control register -- (8000:0000) 0.15 = 0 reset U-Boot normally takes hex values that's why this patch is changing mdio command to handle hex instead of changing mii command to handle decimal values. Signed-off-by: Michal Simek Reviewed-by: Simon Glass Acked-by: Joe Hershberger

net: mii: check phy advertising register when geting link status

2016-08-22T19:21:23+00:00

When phy autoneg on, the link speed and duplex should be determined by phy advertising register and phy link partner ability register. Check phy advertising register when geting phy link speed and duplex if autoneg on. Signed-off-by: Dongpo Li Cc: Joe Hershberger Acked-by: Joe Hershberger

net: mii: Clean up legacy glue that is not used

2016-08-15T20:29:04+00:00

The cleanup of the legacy mii registration API that's no longer used now that the drivers have been converted to use the (more) modern API. Signed-off-by: Joe Hershberger Reviewed-by: Bin Meng