starfive-tech/u-boot.git/cmd, branch rtthread_AMP

cmd: eeprom: Add StarFive VisionFive 2 board support

2023-11-29T02:47:49+00:00

Rename CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR based on current usage. Convert CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SYS_EEPROM_SIZE, CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS to Kconfig. Signed-off-by: Jianlong Huang Signed-off-by: Hal Feng

cmd/eeprom: fix data type issue for parse_numeric_param

2023-11-29T02:47:43+00:00

This patch fixs parse_numeric_param issue on some platfrom which has different sizes of int and long, like riscv64. On riscv64, int is 4 bytes, but long is 8 bytes. on this situation: ulong addr = parse_numeric_param(argv[index]); if argv[index] is "0x80000000", this "ulong addr" will be 0xffffffff80000000. Signed-off-by: Jianlong.Huang Co-developed-by: Wei Fu Signed-off-by: Wei Fu

cmd: fastboot: Fix failure to enter fastboot

2023-09-11T06:13:55+00:00

Only USB host and device are same IP and should be changed mode with initialization before fastboot in Devkits. Add the target of Devkits to math the board. Fixes: 67df54127e38 ("cmd: fastboot: Add presetting on StarFive SoC before fastboot") Signed-off-by: Xingyu Wu

cmd: fastboot: Add presetting on StarFive SoC before fastboot

2023-09-07T01:34:13+00:00

Add the presetting about usb as device in fastboot function. Signed-off-by: Xingyu Wu

Merge tag 'mmc-2021-9-13' of https://source.denx.de/u-boot/custodians/u-boot-mmc

2021-09-13T12:31:41+00:00

Support using mmc command for enumerating mmc card in a given mode Fix device_remove in mmc Fix switch issue with send_status disabled Drop 1ms delay in fsl_esdhc command sending Revert "mmc: sdhci: set to INT_DATA_END when there are data"

efi_loader: eliminate EFI_CALL() in nvedit_efi.c

2021-09-11T09:02:02+00:00

Reduce the code size by avoiding using the external UEFI API and using our internal functions instead. Signed-off-by: Heinrich Schuchardt

mmc: Add support for enumerating MMC card in a given mode using mmc command

2021-09-10T10:17:04+00:00

Add support for enumerating MMC card in a given mode using mmc rescan and mmc dev commands. The speed mode is provided as the last argument in these commands and is indicated using the index from enum bus_mode in include/mmc.h. A speed mode can be set only if it has already been enabled in the device tree. Signed-off-by: Aswath Govindraju Reviewed-by: Jaehoon Chung Tested-by: Jaehoon Chung

common: Remove unused CONFIG_FIT_SHAxxx selectors

2021-09-08T20:10:34+00:00

Originally CONFIG_FIT_SHAxxx enabled specific SHA algos for and only for hash_calculate() in common/image-fit.c. However, since commit 14f061dcb1 ("image: Drop IMAGE_ENABLE_SHAxxx"), the correct selector was changed to CONFIG_SHAxxx. The extra "_FIT_" variants are neither used, nor needed. Remove them. One defconfig disables FIT_SHA256, which is now changed to 'SHA256'. CMD_MVEBU_BUBT needs to select select SHA256 to avoid undefined references to "sha256_*()". bubt.c needs sha256, so this selection is correct. It is not clear why this problem did not manifest before. Note that SHA selection in SPL is broken for this exact reason. There is no corresponding SPL_SHAxxx. Fixing this is is beyond the scope of this change. Also note that we make CONFIG_FIT now imply SHA256, to make up for FIT_SHA256 previously being a default y option. Signed-off-by: Alexandru Gagniuc [trini: Add imply SHA256 to FIT] Signed-off-by: Tom Rini

Merge tag 'xilinx-for-v2021.10-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

2021-08-27T12:33:02+00:00

Xilinx changes for v2021.10-rc3 xilinx: - Disable CONFIG_ARCH_FIXUP_FDT_MEMORY - Print information about cpu via soc drivers and enable DISPLAY_CPUINFO - Wire infrastructure for DTB_RESELECT and MULTI_DTB_FIT zynq: - Wire single QSPI - Use power-source instead of io-standard properties - Enable nor on zc770-xm012 zynqmp: - Change handling around multi_boot() - Setup offset for u-boot.itb in spi - Generate run time dfu_alt_info for capsule update - Use explicit values for enums (zynqmp_firmware.h) - Enable RTC/SHA1/BUTTON/BUTTON_GPIO command - Disable WDT driver by default - Bind usb/scsi via preboot because of EFI - DT updates/fixes - Add soc driver - Fix SPL SPI boot mode versal: - Add soc driver sdhci: - Update tap delay programming for zynq_sdhci driver cmd: - Fix RTC uclass handling in date command - Update pwm help message - Update reset help message watchdog: - Fix wwdt compilation rtc: - Deal with seq alias in rtc uclass - Add zynqmp RTC driver fdt: - Add kernel-doc for fdt_fixup_memory_banks()

cmd: boot: Update reset usage message

2021-08-26T06:08:11+00:00

The commit 573a3811edc8 ("sysreset: psci: support system reset in a generic way with PSCI") has added support for warm reset via PSCI but this hasn't been reflected in usage message and user has to look at the code how to run it. That's why update usage text to make this clear. Here is full help with updated usage: ZynqMP> help reset reset - Perform RESET of the CPU Usage: reset - cold boot without level specifier reset -w - warm reset if implemented Signed-off-by: Michal Simek Reviewed-by: Igor Opaniuk