StarFive Tech U-Boot for VisionFive (JH7110) boards (mirror) https://git.radix-linux.su/starfive-tech/u-boot.git/atom?h=master 2021-08-02T17:32:14+00:00 2021-08-02T17:32:14+00:00 Simon Glass sjg@chromium.org 2021-07-24T15:03:29+00:00 urn:sha1:7e5f460ec457fe310156e399198a41eb0ce1e98c It is a pain to have to specify the value 16 in each call. Add a new hextoul() function and update the code to use it. Add a proper comment to simple_strtoul() while we are here. Signed-off-by: Simon Glass <sjg@chromium.org> 2021-07-27T08:29:31+00:00 Artem Lapkin email2tema@gmail.com 2021-07-13T06:48:47+00:00 urn:sha1:4f038ee6dca74254424c5e54ec4440450c1286ba phy-names was improperly implemented resulting in an inoperable USB-OTG port. - phy-names = "usb2-phy0\0\0usb2-phy1\0"; + phy-names = "usb2-phy0\0usb2-phy1"; Signed-off-by: Artem Lapkin <art@khadas.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 2021-07-27T08:28:41+00:00 Artem Lapkin email2tema@gmail.com 2021-05-27T07:35:28+00:00 urn:sha1:786c514946d485b009f49f8cb2231b83dfb22718 need return -1 if boot source is not EMMC or SD ( for example it will be useful if we have multy env sources configuration and device was booted from SPI flash and env need read from SPI not from mmc ) Signed-off-by: Artem Lapkin <art@khadas.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 2021-04-06T09:10:29+00:00 Neil Armstrong narmstrong@baylibre.com 2021-02-25T08:44:38+00:00 urn:sha1:2fbd37001c77f0b78d43c578d8e350a6afa27e24 The static ethernet link type config code is no more needed because now handled by the meson8b glue driver, delete it. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 2021-02-02T20:33:42+00:00 Simon Glass sjg@chromium.org 2020-10-31T03:38:53+00:00 urn:sha1:401d1c4f5d2d29c4bc4beaec95402ca23eb63295 Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> 2021-01-12T13:25:55+00:00 Artem Lapkin email2tema@gmail.com 2021-01-12T11:42:12+00:00 urn:sha1:6bfa331a6e22507ae839fb8474ce1b3fd58808df Fix reading built-in ethernet MAC address from efuse NOTE: MAC is stored in ASCII format, 1bytes = 2characters by 0 offset if mac from efuse not valid we use meson_generate_serial_ethaddr NOTE: remake odroid-n2.c from Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Artem Lapkin <art@khadas.com> [narmstrong: remove MAC print & spurious new endline] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 2021-01-11T13:59:55+00:00 Marek Szyprowski m.szyprowski@samsung.com 2020-12-18T14:26:45+00:00 urn:sha1:aa3c7912cb6cac8a214e5aa5a1a4251303c9a2c5 Detect eMMC or SD card boot on Odroid-C4/N2 and Khadas VIM3(l) boards and report proper MMC device for the environment loading code. This allows to automatically load and store environment variables on the FAT partition or RAW offset of the MMC device without the need to use different configurations on eMMC and SD card. To use this feature with environment stored on FAT partition, one has to specify an empty device part (i.e. ":1" for the first partition) in CONFIG_ENV_FAT_DEVICE_AND_PART to let the code to set the device to the value returned by mmc_get_env_dev() function. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 2021-01-11T13:59:54+00:00 Marek Szyprowski m.szyprowski@samsung.com 2020-12-17T07:26:42+00:00 urn:sha1:d10037e976ddcf4fda9d25bce4e00429d05f0c8b Add the board specific code for reading built-in ethernet MAC address from efuse. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 2020-10-05T15:59:45+00:00 Neil Armstrong narmstrong@baylibre.com 2020-09-21T07:34:15+00:00 urn:sha1:adbff64af7b7cee3e0007b75df2644090edaafcb The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between an USB3.0 Type A connector and a M.2 Key M slot. The PHY driving these differential lines is shared between the USB3.0 controller and the PCIe Controller, thus only a single controller can use it. This adds this dynamic switching right before booting Linux and the configuration steps in the boards documentation. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> [narmstrong: fixed warning by replacing min() by min_t()] 2020-10-05T15:59:45+00:00 Neil Armstrong narmstrong@baylibre.com 2020-09-21T07:34:13+00:00 urn:sha1:5aeecbcf819055c68173f3e57700f11033c3186b The VIM3 will need a specific code to enable PCIe if enabled in the MCU, thus add a specific board support for VIM3 & VIM3L. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>