starfive-tech/u-boot.git/arch/powerpc/dts, branch rtthread_AMP

mpc8379erdb: enable DM_USB DM_PCI DM_ETH

2021-07-06T18:07:36+00:00

Signed-off-by: Sinan Akman

board: freescale: t208xrdb: add a config option for rev D dts fixups

2021-06-17T06:16:11+00:00

Under DM, we rely on u-boot's device tree to provide the correct PHY addresses. The board_fix_fdt callback is intended to be used for device tree fixups before relocation. Unfortunately, this isn't an option when booting from flash since the device tree isn't writable before relocation. This patch introduces the CONFIG_T2080RDB_REV_D option to signal that a board revision D or up is the target. The config option is used to set the correct Aquantia PHY address in the board's u-boot device tree. Defconfig files with the option enable explicitly are added for convenience. Signed-off-by: Camelia Groza Reviewed-by: Priyanka Jain

powerpc: dts: t1042d4rdb: add FMan v3 nodes

2021-04-15T08:57:29+00:00

Add the FMan v3 nodes for the T1042D4RDB. The nodes are copied over with little modification from the Linux kernel source code. Signed-off-by: Camelia Groza Reviewed-by: Priyanka Jain

powerpc: dts: t1042: add QorIQ DPAA 1 FMan v3 nodes

2021-04-15T08:57:20+00:00

Add the QorIQ DPAA 1 FMan v3 device tree nodes for the T1042 SoC. The device tree nodes are copied over with little modification from the Linux kernel source code. Signed-off-by: Camelia Groza Reviewed-by: Priyanka Jain

powerpc: dts: qoriq: update the mdio offsets under the second FMan v3

2021-04-15T08:56:56+00:00

When two FMan's are present on a board, the MDIO nodes are found at the same offsets inside each FMan. This causes "non unique device name" errors when registering the MDIO nodes under the second FMan. Fix this by updating the offsets of the MDIO nodes to include the parent FMan's offset. Signed-off-by: Camelia Groza Reviewed-by: Priyanka Jain

powerpc: dts: t4240rdb: add FMan v3 nodes

2021-04-15T08:56:46+00:00

Add the FMan v3 nodes for the T4240RDB. The nodes are copied over with little modification from the Linux kernel source code. Signed-off-by: Camelia Groza Reviewed-by: Priyanka Jain

powerpc: dts: t4240: add QorIQ DPAA 1 FMan v3 nodes

2021-04-15T08:56:37+00:00

Add the QorIQ DPAA 1 FMan v3 device tree nodes for the T4240 SoC. The device tree nodes are copied over with little modification from the Linux kernel source code. Signed-off-by: Camelia Groza Reviewed-by: Priyanka Jain

powerpc: dts: t2080rdb: add FMan v3 nodes

2021-04-15T08:56:00+00:00

Add the FMan v3 nodes for the T2080RDB. The nodes are copied over with little modification from the Linux kernel source code. Signed-off-by: Camelia Groza Reviewed-by: Priyanka Jain

powerpc: dts: t2080: add QorIQ DPAA 1 FMan v3 nodes

2021-04-15T08:55:22+00:00

Add the QorIQ DPAA 1 FMan v3 device tree nodes for the T2080 SoC. The device tree nodes are copied over with little modification from the Linux kernel source code. Signed-off-by: Camelia Groza Reviewed-by: Priyanka Jain

powerpc: t2080rdb: Enable RTC support

2021-03-23T12:36:07+00:00

The T2080RDB has a ds1339 on i2c0. Add this to the devicetree and enable the relevant support in the configs. Signed-off-by: Chris Packham Reviewed-by: Priyanka Jain