1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
|
/*
* HP i8042 System Device Controller -- header
*
* Copyright (c) 2001 Brian S. Julin
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL").
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
*
* References:
*
* HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A
*
* System Device Controller Microprocessor Firmware Theory of Operation
* for Part Number 1820-4784 Revision B. Dwg No. A-1820-4784-2
*
*/
#ifndef _LINUX_HP_SDC_H
#define _LINUX_HP_SDC_H
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/time.h>
#include <linux/timer.h>
#if defined(__hppa__)
#include <asm/hardware.h>
#endif
/* No 4X status reads take longer than this (in usec).
*/
#define HP_SDC_MAX_REG_DELAY 20000
typedef void (hp_sdc_irqhook) (int irq, void *dev_id,
uint8_t status, uint8_t data);
int hp_sdc_request_timer_irq(hp_sdc_irqhook *callback);
int hp_sdc_request_hil_irq(hp_sdc_irqhook *callback);
int hp_sdc_request_cooked_irq(hp_sdc_irqhook *callback);
int hp_sdc_release_timer_irq(hp_sdc_irqhook *callback);
int hp_sdc_release_hil_irq(hp_sdc_irqhook *callback);
int hp_sdc_release_cooked_irq(hp_sdc_irqhook *callback);
typedef struct {
int actidx; /* Start of act. Acts are atomic WRT I/O to SDC */
int idx; /* Index within the act */
int endidx; /* transaction is over and done if idx == endidx */
uint8_t *seq; /* commands/data for the transaction */
union {
hp_sdc_irqhook *irqhook; /* Callback, isr or tasklet context */
struct semaphore *semaphore; /* Semaphore to sleep on. */
} act;
} hp_sdc_transaction;
int __hp_sdc_enqueue_transaction(hp_sdc_transaction *this);
int hp_sdc_enqueue_transaction(hp_sdc_transaction *this);
int hp_sdc_dequeue_transaction(hp_sdc_transaction *this);
/* The HP_SDC_ACT* values are peculiar to this driver.
* Nuance: never HP_SDC_ACT_DATAIN | HP_SDC_ACT_DEALLOC, use another
* act to perform the dealloc.
*/
#define HP_SDC_ACT_PRECMD 0x01 /* Send a command first */
#define HP_SDC_ACT_DATAREG 0x02 /* Set data registers */
#define HP_SDC_ACT_DATAOUT 0x04 /* Send data bytes */
#define HP_SDC_ACT_POSTCMD 0x08 /* Send command after */
#define HP_SDC_ACT_DATAIN 0x10 /* Collect data after */
#define HP_SDC_ACT_DURING 0x1f
#define HP_SDC_ACT_SEMAPHORE 0x20 /* Raise semaphore after */
#define HP_SDC_ACT_CALLBACK 0x40 /* Pass data to IRQ handler */
#define HP_SDC_ACT_DEALLOC 0x80 /* Destroy transaction after */
#define HP_SDC_ACT_AFTER 0xe0
#define HP_SDC_ACT_DEAD 0x60 /* Act timed out. */
/* Rest of the flags are straightforward representation of the SDC interface */
#define HP_SDC_STATUS_IBF 0x02 /* Input buffer full */
#define HP_SDC_STATUS_IRQMASK 0xf0 /* Bits containing "level 1" irq */
#define HP_SDC_STATUS_PERIODIC 0x10 /* Periodic 10ms timer */
#define HP_SDC_STATUS_USERTIMER 0x20 /* "Special purpose" timer */
#define HP_SDC_STATUS_TIMER 0x30 /* Both PERIODIC and USERTIMER */
#define HP_SDC_STATUS_REG 0x40 /* Data from an i8042 register */
#define HP_SDC_STATUS_HILCMD 0x50 /* Command from HIL MLC */
#define HP_SDC_STATUS_HILDATA 0x60 /* Data from HIL MLC */
#define HP_SDC_STATUS_PUP 0x70 /* Successful power-up self test */
#define HP_SDC_STATUS_KCOOKED 0x80 /* Key from cooked kbd */
#define HP_SDC_STATUS_KRPG 0xc0 /* Key from Repeat Gen */
#define HP_SDC_STATUS_KMOD_SUP 0x10 /* Shift key is up */
#define HP_SDC_STATUS_KMOD_CUP 0x20 /* Control key is up */
#define HP_SDC_NMISTATUS_FHS 0x40 /* NMI is a fast handshake irq */
/* Internal i8042 registers (there are more, but they are not too useful). */
#define HP_SDC_USE 0x02 /* Resource usage (including OB bit) */
#define HP_SDC_IM 0x04 /* Interrupt mask */
#define HP_SDC_CFG 0x11 /* Configuration register */
#define HP_SDC_KBLANGUAGE 0x12 /* Keyboard language */
#define HP_SDC_D0 0x70 /* General purpose data buffer 0 */
#define HP_SDC_D1 0x71 /* General purpose data buffer 1 */
#define HP_SDC_D2 0x72 /* General purpose data buffer 2 */
#define HP_SDC_D3 0x73 /* General purpose data buffer 3 */
#define HP_SDC_VT1 0x74 /* Timer for voice 1 */
#define HP_SDC_VT2 0x75 /* Timer for voice 2 */
#define HP_SDC_VT3 0x76 /* Timer for voice 3 */
#define HP_SDC_VT4 0x77 /* Timer for voice 4 */
#define HP_SDC_KBN 0x78 /* Which HIL devs are Nimitz */
#define HP_SDC_KBC 0x79 /* Which HIL devs are cooked kbds */
#define HP_SDC_LPS 0x7a /* i8042's view of HIL status */
#define HP_SDC_LPC 0x7b /* i8042's view of HIL "control" */
#define HP_SDC_RSV 0x7c /* Reserved "for testing" */
#define HP_SDC_LPR 0x7d /* i8042 count of HIL reconfigs */
#define HP_SDC_XTD 0x7e /* "Extended Configuration" register */
#define HP_SDC_STR 0x7f /* i8042 self-test result */
/* Bitfields for above registers */
#define HP_SDC_USE_LOOP 0x04 /* Command is currently on the loop. */
#define HP_SDC_IM_MASK 0x1f /* these bits not part of cmd/status */
#define HP_SDC_IM_FH 0x10 /* Mask the fast handshake irq */
#define HP_SDC_IM_PT 0x08 /* Mask the periodic timer irq */
#define HP_SDC_IM_TIMERS 0x04 /* Mask the MT/DT/CT irq */
#define HP_SDC_IM_RESET 0x02 /* Mask the reset key irq */
#define HP_SDC_IM_HIL 0x01 /* Mask the HIL MLC irq */
#define HP_SDC_CFG_ROLLOVER 0x08 /* WTF is "N-key rollover"? */
#define HP_SDC_CFG_KBD 0x10 /* There is a keyboard */
#define HP_SDC_CFG_NEW 0x20 /* Supports/uses HIL MLC */
#define HP_SDC_CFG_KBD_OLD 0x03 /* keyboard code for non-HIL */
#define HP_SDC_CFG_KBD_NEW 0x07 /* keyboard code from HIL autoconfig */
#define HP_SDC_CFG_REV 0x40 /* Code revision bit */
#define HP_SDC_CFG_IDPROM 0x80 /* IDPROM present in kbd (not HIL) */
#define HP_SDC_LPS_NDEV 0x07 /* # devices autoconfigured on HIL */
#define HP_SDC_LPS_ACSUCC 0x08 /* loop autoconfigured successfully */
#define HP_SDC_LPS_ACFAIL 0x80 /* last loop autoconfigure failed */
#define HP_SDC_LPC_APE_IPF 0x01 /* HIL MLC APE/IPF (autopoll) set */
#define HP_SDC_LPC_ARCONERR 0x02 /* i8042 autoreconfigs loop on err */
#define HP_SDC_LPC_ARCQUIET 0x03 /* i8042 doesn't report autoreconfigs*/
#define HP_SDC_LPC_COOK 0x10 /* i8042 cooks devices in _KBN */
#define HP_SDC_LPC_RC 0x80 /* causes autoreconfig */
#define HP_SDC_XTD_REV 0x07 /* contains revision code */
#define HP_SDC_XTD_REV_STRINGS(val, str) \
switch (val) { \
case 0x1: str = "1820-3712"; break; \
case 0x2: str = "1820-4379"; break; \
case 0x3: str = "1820-4784"; break; \
default: str = "unknown"; \
};
#define HP_SDC_XTD_BEEPER 0x08 /* TI SN76494 beeper available */
#define HP_SDC_XTD_BBRTC 0x20 /* OKI MSM-58321 BBRTC present */
#define HP_SDC_CMD_LOAD_RT 0x31 /* Load real time (from 8042) */
#define HP_SDC_CMD_LOAD_FHS 0x36 /* Load the fast handshake timer */
#define HP_SDC_CMD_LOAD_MT 0x38 /* Load the match timer */
#define HP_SDC_CMD_LOAD_DT 0x3B /* Load the delay timer */
#define HP_SDC_CMD_LOAD_CT 0x3E /* Load the cycle timer */
#define HP_SDC_CMD_SET_IM 0x40 /* 010xxxxx == set irq mask */
/* The documents provided do not explicitly state that all registers between
* 0x01 and 0x1f inclusive can be read by sending their register index as a
* command, but this is implied and appears to be the case.
*/
#define HP_SDC_CMD_READ_RAM 0x00 /* Load from i8042 RAM (autoinc) */
#define HP_SDC_CMD_READ_USE 0x02 /* Undocumented! Load from usage reg */
#define HP_SDC_CMD_READ_IM 0x04 /* Load current interrupt mask */
#define HP_SDC_CMD_READ_KCC 0x11 /* Load primary kbd config code */
#define HP_SDC_CMD_READ_KLC 0x12 /* Load primary kbd language code */
#define HP_SDC_CMD_READ_T1 0x13 /* Load timer output buffer byte 1 */
#define HP_SDC_CMD_READ_T2 0x14 /* Load timer output buffer byte 1 */
#define HP_SDC_CMD_READ_T3 0x15 /* Load timer output buffer byte 1 */
#define HP_SDC_CMD_READ_T4 0x16 /* Load timer output buffer byte 1 */
#define HP_SDC_CMD_READ_T5 0x17 /* Load timer output buffer byte 1 */
#define HP_SDC_CMD_READ_D0 0xf0 /* Load from i8042 RAM location 0x70 */
#define HP_SDC_CMD_READ_D1 0xf1 /* Load from i8042 RAM location 0x71 */
#define HP_SDC_CMD_READ_D2 0xf2 /* Load from i8042 RAM location 0x72 */
#define HP_SDC_CMD_READ_D3 0xf3 /* Load from i8042 RAM location 0x73 */
#define HP_SDC_CMD_READ_VT1 0xf4 /* Load from i8042 RAM location 0x74 */
#define HP_SDC_CMD_READ_VT2 0xf5 /* Load from i8042 RAM location 0x75 */
#define HP_SDC_CMD_READ_VT3 0xf6 /* Load from i8042 RAM location 0x76 */
#define HP_SDC_CMD_READ_VT4 0xf7 /* Load from i8042 RAM location 0x77 */
#define HP_SDC_CMD_READ_KBN 0xf8 /* Load from i8042 RAM location 0x78 */
#define HP_SDC_CMD_READ_KBC 0xf9 /* Load from i8042 RAM location 0x79 */
#define HP_SDC_CMD_READ_LPS 0xfa /* Load from i8042 RAM location 0x7a */
#define HP_SDC_CMD_READ_LPC 0xfb /* Load from i8042 RAM location 0x7b */
#define HP_SDC_CMD_READ_RSV 0xfc /* Load from i8042 RAM location 0x7c */
#define HP_SDC_CMD_READ_LPR 0xfd /* Load from i8042 RAM location 0x7d */
#define HP_SDC_CMD_READ_XTD 0xfe /* Load from i8042 RAM location 0x7e */
#define HP_SDC_CMD_READ_STR 0xff /* Load from i8042 RAM location 0x7f */
#define HP_SDC_CMD_SET_ARD 0xA0 /* Set emulated autorepeat delay */
#define HP_SDC_CMD_SET_ARR 0xA2 /* Set emulated autorepeat rate */
#define HP_SDC_CMD_SET_BELL 0xA3 /* Set voice 3 params for "beep" cmd */
#define HP_SDC_CMD_SET_RPGR 0xA6 /* Set "RPG" irq rate (doesn't work) */
#define HP_SDC_CMD_SET_RTMS 0xAD /* Set the RTC time (milliseconds) */
#define HP_SDC_CMD_SET_RTD 0xAF /* Set the RTC time (days) */
#define HP_SDC_CMD_SET_FHS 0xB2 /* Set fast handshake timer */
#define HP_SDC_CMD_SET_MT 0xB4 /* Set match timer */
#define HP_SDC_CMD_SET_DT 0xB7 /* Set delay timer */
#define HP_SDC_CMD_SET_CT 0xBA /* Set cycle timer */
#define HP_SDC_CMD_SET_RAMP 0xC1 /* Reset READ_RAM autoinc counter */
#define HP_SDC_CMD_SET_D0 0xe0 /* Load to i8042 RAM location 0x70 */
#define HP_SDC_CMD_SET_D1 0xe1 /* Load to i8042 RAM location 0x71 */
#define HP_SDC_CMD_SET_D2 0xe2 /* Load to i8042 RAM location 0x72 */
#define HP_SDC_CMD_SET_D3 0xe3 /* Load to i8042 RAM location 0x73 */
#define HP_SDC_CMD_SET_VT1 0xe4 /* Load to i8042 RAM location 0x74 */
#define HP_SDC_CMD_SET_VT2 0xe5 /* Load to i8042 RAM location 0x75 */
#define HP_SDC_CMD_SET_VT3 0xe6 /* Load to i8042 RAM location 0x76 */
#define HP_SDC_CMD_SET_VT4 0xe7 /* Load to i8042 RAM location 0x77 */
#define HP_SDC_CMD_SET_KBN 0xe8 /* Load to i8042 RAM location 0x78 */
#define HP_SDC_CMD_SET_KBC 0xe9 /* Load to i8042 RAM location 0x79 */
#define HP_SDC_CMD_SET_LPS 0xea /* Load to i8042 RAM location 0x7a */
#define HP_SDC_CMD_SET_LPC 0xeb /* Load to i8042 RAM location 0x7b */
#define HP_SDC_CMD_SET_RSV 0xec /* Load to i8042 RAM location 0x7c */
#define HP_SDC_CMD_SET_LPR 0xed /* Load to i8042 RAM location 0x7d */
#define HP_SDC_CMD_SET_XTD 0xee /* Load to i8042 RAM location 0x7e */
#define HP_SDC_CMD_SET_STR 0xef /* Load to i8042 RAM location 0x7f */
#define HP_SDC_CMD_DO_RTCW 0xc2 /* i8042 RAM 0x70 --> RTC */
#define HP_SDC_CMD_DO_RTCR 0xc3 /* RTC[0x70 0:3] --> irq/status/data */
#define HP_SDC_CMD_DO_BEEP 0xc4 /* i8042 RAM 0x70-74 --> beeper,VT3 */
#define HP_SDC_CMD_DO_HIL 0xc5 /* i8042 RAM 0x70-73 -->
HIL MLC R0,R1 i8042 HIL watchdog */
/* Values used to (de)mangle input/output to/from the HIL MLC */
#define HP_SDC_DATA 0x40 /* Data from an 8042 register */
#define HP_SDC_HIL_CMD 0x50 /* Data from HIL MLC R1/8042 */
#define HP_SDC_HIL_R1MASK 0x0f /* Contents of HIL MLC R1 0:3 */
#define HP_SDC_HIL_AUTO 0x10 /* Set if POL results from i8042 */
#define HP_SDC_HIL_ISERR 0x80 /* Has meaning as in next 4 values */
#define HP_SDC_HIL_RC_DONE 0x80 /* i8042 auto-configured loop */
#define HP_SDC_HIL_ERR 0x81 /* HIL MLC R2 had a bit set */
#define HP_SDC_HIL_TO 0x82 /* i8042 HIL watchdog expired */
#define HP_SDC_HIL_RC 0x84 /* i8042 is auto-configuring loop */
#define HP_SDC_HIL_DAT 0x60 /* Data from HIL MLC R0 */
typedef struct {
rwlock_t ibf_lock;
rwlock_t lock; /* user/tasklet lock */
rwlock_t rtq_lock; /* isr/tasklet lock */
rwlock_t hook_lock; /* isr/user lock for handler add/del */
unsigned int irq, nmi; /* Our IRQ lines */
unsigned long base_io, status_io, data_io; /* Our IO ports */
uint8_t im; /* Interrupt mask */
int set_im; /* Interrupt mask needs to be set. */
int ibf; /* Last known status of IBF flag */
uint8_t wi; /* current i8042 write index */
uint8_t r7[4]; /* current i8042[0x70 - 0x74] values */
uint8_t r11, r7e; /* Values from version/revision regs */
hp_sdc_irqhook *timer, *reg, *hil, *pup, *cooked;
#define HP_SDC_QUEUE_LEN 16
hp_sdc_transaction *tq[HP_SDC_QUEUE_LEN]; /* All pending read/writes */
int rcurr, rqty; /* Current read transact in process */
ktime_t rtime; /* Time when current read started */
int wcurr; /* Current write transact in process */
int dev_err; /* carries status from registration */
#if defined(__hppa__)
struct parisc_device *dev;
#elif defined(__mc68000__)
void *dev;
#else
#error No support for device registration on this arch yet.
#endif
struct timer_list kicker; /* Keeps below task alive */
struct tasklet_struct task;
} hp_i8042_sdc;
#endif /* _LINUX_HP_SDC_H */
|
