1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Regulator driver for RICOH RC5T583 power management chip.
*
* Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved.
* Author: Laxman dewangan <ldewangan@nvidia.com>
*
* based on code
* Copyright (C) 2011 RICOH COMPANY,LTD
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/gpio.h>
#include <linux/mfd/rc5t583.h>
struct rc5t583_regulator_info {
int deepsleep_id;
/* Regulator register address.*/
uint8_t reg_disc_reg;
uint8_t disc_bit;
uint8_t deepsleep_reg;
/* Regulator specific turn-on delay and voltage settling time*/
int enable_uv_per_us;
/* Used by regulator core */
struct regulator_desc desc;
};
static int rc5t583_regulator_enable_time(struct regulator_dev *rdev)
{
struct rc5t583_regulator_info *reg_info = rdev_get_drvdata(rdev);
int vsel = regulator_get_voltage_sel_regmap(rdev);
int curr_uV = regulator_list_voltage_linear(rdev, vsel);
return DIV_ROUND_UP(curr_uV, reg_info->enable_uv_per_us);
}
static const struct regulator_ops rc5t583_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.enable_time = rc5t583_regulator_enable_time,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
};
#define RC5T583_REG(_id, _en_reg, _en_bit, _disc_reg, _disc_bit, \
_vout_mask, _min_mv, _max_mv, _step_uV, _enable_mv) \
{ \
.reg_disc_reg = RC5T583_REG_##_disc_reg, \
.disc_bit = _disc_bit, \
.deepsleep_reg = RC5T583_REG_##_id##DAC_DS, \
.enable_uv_per_us = _enable_mv * 1000, \
.deepsleep_id = RC5T583_DS_##_id, \
.desc = { \
.name = "rc5t583-regulator-"#_id, \
.id = RC5T583_REGULATOR_##_id, \
.n_voltages = (_max_mv - _min_mv) * 1000 / _step_uV + 1, \
.ops = &rc5t583_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.vsel_reg = RC5T583_REG_##_id##DAC, \
.vsel_mask = _vout_mask, \
.enable_reg = RC5T583_REG_##_en_reg, \
.enable_mask = BIT(_en_bit), \
.min_uV = _min_mv * 1000, \
.uV_step = _step_uV, \
.ramp_delay = 40 * 1000, \
}, \
}
static struct rc5t583_regulator_info rc5t583_reg_info[RC5T583_REGULATOR_MAX] = {
RC5T583_REG(DC0, DC0CTL, 0, DC0CTL, 1, 0x7F, 700, 1500, 12500, 4),
RC5T583_REG(DC1, DC1CTL, 0, DC1CTL, 1, 0x7F, 700, 1500, 12500, 14),
RC5T583_REG(DC2, DC2CTL, 0, DC2CTL, 1, 0x7F, 900, 2400, 12500, 14),
RC5T583_REG(DC3, DC3CTL, 0, DC3CTL, 1, 0x7F, 900, 2400, 12500, 14),
RC5T583_REG(LDO0, LDOEN2, 0, LDODIS2, 0, 0x7F, 900, 3400, 25000, 160),
RC5T583_REG(LDO1, LDOEN2, 1, LDODIS2, 1, 0x7F, 900, 3400, 25000, 160),
RC5T583_REG(LDO2, LDOEN2, 2, LDODIS2, 2, 0x7F, 900, 3400, 25000, 160),
RC5T583_REG(LDO3, LDOEN2, 3, LDODIS2, 3, 0x7F, 900, 3400, 25000, 160),
RC5T583_REG(LDO4, LDOEN2, 4, LDODIS2, 4, 0x3F, 750, 1500, 12500, 133),
RC5T583_REG(LDO5, LDOEN2, 5, LDODIS2, 5, 0x7F, 900, 3400, 25000, 267),
RC5T583_REG(LDO6, LDOEN2, 6, LDODIS2, 6, 0x7F, 900, 3400, 25000, 133),
RC5T583_REG(LDO7, LDOEN2, 7, LDODIS2, 7, 0x7F, 900, 3400, 25000, 233),
RC5T583_REG(LDO8, LDOEN1, 0, LDODIS1, 0, 0x7F, 900, 3400, 25000, 233),
RC5T583_REG(LDO9, LDOEN1, 1, LDODIS1, 1, 0x7F, 900, 3400, 25000, 133),
};
static int rc5t583_regulator_probe(struct platform_device *pdev)
{
struct rc5t583 *rc5t583 = dev_get_drvdata(pdev->dev.parent);
struct rc5t583_platform_data *pdata = dev_get_platdata(rc5t583->dev);
struct regulator_config config = { };
struct regulator_dev *rdev;
struct rc5t583_regulator_info *ri;
int ret;
int id;
if (!pdata) {
dev_err(&pdev->dev, "No platform data, exiting...\n");
return -ENODEV;
}
for (id = 0; id < RC5T583_REGULATOR_MAX; ++id) {
ri = &rc5t583_reg_info[id];
if (ri->deepsleep_id == RC5T583_DS_NONE)
goto skip_ext_pwr_config;
ret = rc5t583_ext_power_req_config(rc5t583->dev,
ri->deepsleep_id,
pdata->regulator_ext_pwr_control[id],
pdata->regulator_deepsleep_slot[id]);
/*
* Configuring external control is not a major issue,
* just give warning.
*/
if (ret < 0)
dev_warn(&pdev->dev,
"Failed to configure ext control %d\n", id);
skip_ext_pwr_config:
config.dev = &pdev->dev;
config.init_data = pdata->reg_init_data[id];
config.driver_data = ri;
config.regmap = rc5t583->regmap;
rdev = devm_regulator_register(&pdev->dev, &ri->desc, &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "Failed to register regulator %s\n",
ri->desc.name);
return PTR_ERR(rdev);
}
}
return 0;
}
static struct platform_driver rc5t583_regulator_driver = {
.driver = {
.name = "rc5t583-regulator",
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
.probe = rc5t583_regulator_probe,
};
static int __init rc5t583_regulator_init(void)
{
return platform_driver_register(&rc5t583_regulator_driver);
}
subsys_initcall(rc5t583_regulator_init);
static void __exit rc5t583_regulator_exit(void)
{
platform_driver_unregister(&rc5t583_regulator_driver);
}
module_exit(rc5t583_regulator_exit);
MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
MODULE_DESCRIPTION("RC5T583 regulator driver");
MODULE_ALIAS("platform:rc5t583-regulator");
MODULE_LICENSE("GPL v2");
|
