1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
|
/*
* snull.h -- definitions for the network module
*
* Copyright (C) 2001 Alessandro Rubini and Jonathan Corbet
* Copyright (C) 2001 O'Reilly & Associates
*
* The source code in this file can be freely used, adapted,
* and redistributed in source or binary form, so long as an
* acknowledgment appears in derived source files. The citation
* should list that the code comes from the book "Linux Device
* Drivers" by Alessandro Rubini and Jonathan Corbet, published
* by O'Reilly & Associates. No warranty is attached;
* we cannot take responsibility for errors or fitness for use.
*/
/* version dependencies have been confined to a separate file */
/* Tunable parameters */
#define TX_RING_ENTRIES 64 /* 64-512?*/
#define RX_RING_ENTRIES 16 /* Do not change */
/* Internal constants */
#define TX_RING_BUFFER_SIZE (TX_RING_ENTRIES*sizeof(tx_packet))
#define RX_BUFFER_SIZE 1546 /* ethenet packet size */
#define METH_RX_BUFF_SIZE 4096
#define METH_RX_HEAD 34 /* status + 3 quad garbage-fill + 2 byte zero-pad */
#define RX_BUFFER_OFFSET (sizeof(rx_status_vector)+2) /* staus vector + 2 bytes of padding */
#define RX_BUCKET_SIZE 256
#undef BIT
#define BIT(x) (1UL << (x))
/* For more detailed explanations of what each field menas,
see Nick's great comments to #defines below (or docs, if
you are lucky enough toget hold of them :)*/
/* tx status vector is written over tx command header upon
dma completion. */
typedef struct tx_status_vector {
u64 sent:1; /* always set to 1...*/
u64 pad0:34;/* always set to 0 */
u64 flags:9; /*I'm too lazy to specify each one separately at the moment*/
u64 col_retry_cnt:4; /*collision retry count*/
u64 len:16; /*Transmit length in bytes*/
} tx_status_vector;
/*
* Each packet is 128 bytes long.
* It consists of header, 0-3 concatination
* buffer pointers and up to 120 data bytes.
*/
typedef struct tx_packet_hdr {
u64 pad1:36; /*should be filled with 0 */
u64 cat_ptr3_valid:1, /*Concatination pointer valid flags*/
cat_ptr2_valid:1,
cat_ptr1_valid:1;
u64 tx_int_flag:1; /*Generate TX intrrupt when packet has been sent*/
u64 term_dma_flag:1; /*Terminate transmit DMA on transmit abort conditions*/
u64 data_offset:7; /*Starting byte offset in ring data block*/
u64 data_len:16; /*Length of valid data in bytes-1*/
} tx_packet_hdr;
typedef union tx_cat_ptr {
struct {
u64 pad2:16; /* should be 0 */
u64 len:16; /*length of buffer data - 1*/
u64 start_addr:29; /*Physical starting address*/
u64 pad1:3; /* should be zero */
} form;
u64 raw;
} tx_cat_ptr;
typedef struct tx_packet {
union {
tx_packet_hdr header;
tx_status_vector res;
u64 raw;
}header;
union {
tx_cat_ptr cat_buf[3];
char dt[120];
} data;
} tx_packet;
typedef union rx_status_vector {
volatile struct {
u64 pad1:1;/*fill it with ones*/
u64 pad2:15;/*fill with 0*/
u64 ip_chk_sum:16;
u64 seq_num:5;
u64 mac_addr_match:1;
u64 mcast_addr_match:1;
u64 carrier_event_seen:1;
u64 bad_packet:1;
u64 long_event_seen:1;
u64 invalid_preamble:1;
u64 broadcast:1;
u64 multicast:1;
u64 crc_error:1;
u64 huh:1;/*???*/
u64 rx_code_violation:1;
u64 rx_len:16;
} parsed;
volatile u64 raw;
} rx_status_vector;
typedef struct rx_packet {
rx_status_vector status;
u64 pad[3]; /* For whatever reason, there needs to be 4 double-word offset */
u16 pad2;
char buf[METH_RX_BUFF_SIZE-sizeof(rx_status_vector)-3*sizeof(u64)-sizeof(u16)];/* data */
} rx_packet;
#define TX_INFO_RPTR 0x00FF0000
#define TX_INFO_WPTR 0x000000FF
/* Bits in METH_MAC */
#define SGI_MAC_RESET BIT(0) /* 0: MAC110 active in run mode, 1: Global reset signal to MAC110 core is active */
#define METH_PHY_FDX BIT(1) /* 0: Disable full duplex, 1: Enable full duplex */
#define METH_PHY_LOOP BIT(2) /* 0: Normal operation, follows 10/100mbit and M10T/MII select, 1: loops internal MII bus */
/* selects ignored */
#define METH_100MBIT BIT(3) /* 0: 10meg mode, 1: 100meg mode */
#define METH_PHY_MII BIT(4) /* 0: MII selected, 1: SIA selected */
/* Note: when loopback is set this bit becomes collision control. Setting this bit will */
/* cause a collision to be reported. */
/* Bits 5 and 6 are used to determine the the Destination address filter mode */
#define METH_ACCEPT_MY 0 /* 00: Accept PHY address only */
#define METH_ACCEPT_MCAST 0x20 /* 01: Accept physical, broadcast, and multicast filter matches only */
#define METH_ACCEPT_AMCAST 0x40 /* 10: Accept physical, broadcast, and all multicast packets */
#define METH_PROMISC 0x60 /* 11: Promiscious mode */
#define METH_PHY_LINK_FAIL BIT(7) /* 0: Link failure detection disabled, 1: Hardware scans for link failure in PHY */
#define METH_MAC_IPG 0x1ffff00
#define METH_DEFAULT_IPG ((17<<15) | (11<<22) | (21<<8))
/* 0x172e5c00 */ /* 23, 23, 23 */ /*0x54A9500 *//*21,21,21*/
/* Bits 8 through 14 are used to determine Inter-Packet Gap between "Back to Back" packets */
/* The gap depends on the clock speed of the link, 80ns per increment for 100baseT, 800ns */
/* per increment for 10BaseT */
/* Bits 15 through 21 are used to determine IPGR1 */
/* Bits 22 through 28 are used to determine IPGR2 */
#define METH_REV_SHIFT 29 /* Bits 29 through 31 are used to determine the revision */
/* 000: Inital revision */
/* 001: First revision, Improved TX concatenation */
/* DMA control bits */
#define METH_RX_OFFSET_SHIFT 12 /* Bits 12:14 of DMA control register indicate starting offset of packet data for RX operation */
#define METH_RX_DEPTH_SHIFT 4 /* Bits 8:4 define RX fifo depth -- when # of RX fifo entries != depth, interrupt is generted */
#define METH_DMA_TX_EN BIT(1) /* enable TX DMA */
#define METH_DMA_TX_INT_EN BIT(0) /* enable TX Buffer Empty interrupt */
#define METH_DMA_RX_EN BIT(15) /* Enable RX */
#define METH_DMA_RX_INT_EN BIT(9) /* Enable interrupt on RX packet */
/* RX FIFO MCL Info bits */
#define METH_RX_FIFO_WPTR(x) (((x)>>16)&0xf)
#define METH_RX_FIFO_RPTR(x) (((x)>>8)&0xf)
#define METH_RX_FIFO_DEPTH(x) ((x)&0x1f)
/* RX status bits */
#define METH_RX_ST_VALID BIT(63)
#define METH_RX_ST_RCV_CODE_VIOLATION BIT(16)
#define METH_RX_ST_DRBL_NBL BIT(17)
#define METH_RX_ST_CRC_ERR BIT(18)
#define METH_RX_ST_MCAST_PKT BIT(19)
#define METH_RX_ST_BCAST_PKT BIT(20)
#define METH_RX_ST_INV_PREAMBLE_CTX BIT(21)
#define METH_RX_ST_LONG_EVT_SEEN BIT(22)
#define METH_RX_ST_BAD_PACKET BIT(23)
#define METH_RX_ST_CARRIER_EVT_SEEN BIT(24)
#define METH_RX_ST_MCAST_FILTER_MATCH BIT(25)
#define METH_RX_ST_PHYS_ADDR_MATCH BIT(26)
#define METH_RX_STATUS_ERRORS \
( \
METH_RX_ST_RCV_CODE_VIOLATION| \
METH_RX_ST_CRC_ERR| \
METH_RX_ST_INV_PREAMBLE_CTX| \
METH_RX_ST_LONG_EVT_SEEN| \
METH_RX_ST_BAD_PACKET| \
METH_RX_ST_CARRIER_EVT_SEEN \
)
/* Bits in METH_INT */
/* Write _1_ to corresponding bit to clear */
#define METH_INT_TX_EMPTY BIT(0) /* 0: No interrupt pending, 1: The TX ring buffer is empty */
#define METH_INT_TX_PKT BIT(1) /* 0: No interrupt pending */
/* 1: A TX message had the INT request bit set, the packet has been sent. */
#define METH_INT_TX_LINK_FAIL BIT(2) /* 0: No interrupt pending, 1: PHY has reported a link failure */
#define METH_INT_MEM_ERROR BIT(3) /* 0: No interrupt pending */
/* 1: A memory error occurred durring DMA, DMA stopped, Fatal */
#define METH_INT_TX_ABORT BIT(4) /* 0: No interrupt pending, 1: The TX aborted operation, DMA stopped, FATAL */
#define METH_INT_RX_THRESHOLD BIT(5) /* 0: No interrupt pending, 1: Selected receive threshold condition Valid */
#define METH_INT_RX_UNDERFLOW BIT(6) /* 0: No interrupt pending, 1: FIFO was empty, packet could not be queued */
#define METH_INT_RX_OVERFLOW BIT(7) /* 0: No interrupt pending, 1: DMA FIFO Overflow, DMA stopped, FATAL */
/*#define METH_INT_RX_RPTR_MASK 0x0001F00*/ /* Bits 8 through 12 alias of RX read-pointer */
#define METH_INT_RX_RPTR_MASK 0x0000F00 /* Bits 8 through 11 alias of RX read-pointer - so, is Rx FIFO 16 or 32 entry?*/
/* Bits 13 through 15 are always 0. */
#define METH_INT_TX_RPTR_MASK 0x1FF0000 /* Bits 16 through 24 alias of TX read-pointer */
#define METH_INT_RX_SEQ_MASK 0x2E000000 /* Bits 25 through 29 are the starting seq number for the message at the */
/* top of the queue */
#define METH_INT_ERROR (METH_INT_TX_LINK_FAIL| \
METH_INT_MEM_ERROR| \
METH_INT_TX_ABORT| \
METH_INT_RX_OVERFLOW| \
METH_INT_RX_UNDERFLOW)
#define METH_INT_MCAST_HASH BIT(30) /* If RX DMA is enabled the hash select logic output is latched here */
/* TX status bits */
#define METH_TX_ST_DONE BIT(63) /* TX complete */
#define METH_TX_ST_SUCCESS BIT(23) /* Packet was transmitted successfully */
#define METH_TX_ST_TOOLONG BIT(24) /* TX abort due to excessive length */
#define METH_TX_ST_UNDERRUN BIT(25) /* TX abort due to underrun (?) */
#define METH_TX_ST_EXCCOLL BIT(26) /* TX abort due to excess collisions */
#define METH_TX_ST_DEFER BIT(27) /* TX abort due to excess deferals */
#define METH_TX_ST_LATECOLL BIT(28) /* TX abort due to late collision */
/* Tx command header bits */
#define METH_TX_CMD_INT_EN BIT(24) /* Generate TX interrupt when packet is sent */
/* Phy MDIO interface busy flag */
#define MDIO_BUSY BIT(16)
#define MDIO_DATA_MASK 0xFFFF
/* PHY defines */
#define PHY_QS6612X 0x0181441 /* Quality TX */
#define PHY_ICS1889 0x0015F41 /* ICS FX */
#define PHY_ICS1890 0x0015F42 /* ICS TX */
#define PHY_DP83840 0x20005C0 /* National TX */
#define ADVANCE_RX_PTR(x) x=(x+1)&(RX_RING_ENTRIES-1)
|
