1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
|
// SPDX-License-Identifier: GPL-2.0-or-later
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pmbus.h>
#include "pmbus.h"
/* LTC4286 register */
#define LTC4286_MFR_CONFIG1 0xF2
/* LTC4286 configuration */
#define VRANGE_SELECT_BIT BIT(1)
#define LTC4286_MFR_ID_SIZE 3
/*
* Initialize the MBR as default settings which is referred to LTC4286 datasheet
* (March 22, 2022 version) table 3 page 16
*/
static struct pmbus_driver_info ltc4286_info = {
.pages = 1,
.format[PSC_VOLTAGE_IN] = direct,
.format[PSC_VOLTAGE_OUT] = direct,
.format[PSC_CURRENT_OUT] = direct,
.format[PSC_POWER] = direct,
.format[PSC_TEMPERATURE] = direct,
.m[PSC_VOLTAGE_IN] = 32,
.b[PSC_VOLTAGE_IN] = 0,
.R[PSC_VOLTAGE_IN] = 1,
.m[PSC_VOLTAGE_OUT] = 32,
.b[PSC_VOLTAGE_OUT] = 0,
.R[PSC_VOLTAGE_OUT] = 1,
.m[PSC_CURRENT_OUT] = 1024,
.b[PSC_CURRENT_OUT] = 0,
/*
* The rsense value used in MBR formula in LTC4286 datasheet should be ohm unit.
* However, the rsense value that user input is micro ohm.
* Thus, the MBR setting which involves rsense should be shifted by 6 digits.
*/
.R[PSC_CURRENT_OUT] = 3 - 6,
.m[PSC_POWER] = 1,
.b[PSC_POWER] = 0,
/*
* The rsense value used in MBR formula in LTC4286 datasheet should be ohm unit.
* However, the rsense value that user input is micro ohm.
* Thus, the MBR setting which involves rsense should be shifted by 6 digits.
*/
.R[PSC_POWER] = 4 - 6,
.m[PSC_TEMPERATURE] = 1,
.b[PSC_TEMPERATURE] = 273,
.R[PSC_TEMPERATURE] = 0,
.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
PMBUS_HAVE_PIN | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_VOUT |
PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_TEMP,
};
static const struct i2c_device_id ltc4286_id[] = {
{ "ltc4286", },
{ "ltc4287", },
{}
};
MODULE_DEVICE_TABLE(i2c, ltc4286_id);
static int ltc4286_probe(struct i2c_client *client)
{
int ret;
const struct i2c_device_id *mid;
u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
struct pmbus_driver_info *info;
u32 rsense;
int vrange_nval, vrange_oval;
ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, block_buffer);
if (ret < 0) {
return dev_err_probe(&client->dev, ret,
"Failed to read manufacturer id\n");
}
/*
* Refer to ltc4286 datasheet page 20
* the manufacturer id is LTC
*/
if (ret != LTC4286_MFR_ID_SIZE ||
strncmp(block_buffer, "LTC", LTC4286_MFR_ID_SIZE)) {
return dev_err_probe(&client->dev, -ENODEV,
"Manufacturer id mismatch\n");
}
ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer);
if (ret < 0) {
return dev_err_probe(&client->dev, ret,
"Failed to read manufacturer model\n");
}
for (mid = ltc4286_id; mid->name[0]; mid++) {
if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
break;
}
if (!mid->name[0])
return dev_err_probe(&client->dev, -ENODEV,
"Unsupported device\n");
if (of_property_read_u32(client->dev.of_node,
"shunt-resistor-micro-ohms", &rsense))
rsense = 300; /* 0.3 mOhm if not set via DT */
if (rsense == 0)
return -EINVAL;
/* Check for the latter MBR value won't overflow */
if (rsense > (INT_MAX / 1024))
return -EINVAL;
info = devm_kmemdup(&client->dev, <c4286_info, sizeof(*info),
GFP_KERNEL);
if (!info)
return -ENOMEM;
/* Check MFR1 CONFIG register bit 1 VRANGE_SELECT before driver loading */
vrange_oval = i2c_smbus_read_word_data(client, LTC4286_MFR_CONFIG1);
if (vrange_oval < 0)
return dev_err_probe(&client->dev, vrange_oval,
"Failed to read manufacturer configuration one\n");
vrange_nval = vrange_oval;
if (device_property_read_bool(&client->dev, "adi,vrange-low-enable")) {
vrange_nval &=
~VRANGE_SELECT_BIT; /* VRANGE_SELECT = 0, 25.6 volts */
info->m[PSC_VOLTAGE_IN] = 128;
info->m[PSC_VOLTAGE_OUT] = 128;
info->m[PSC_POWER] = 4 * rsense;
} else {
vrange_nval |=
VRANGE_SELECT_BIT; /* VRANGE_SELECT = 1, 102.4 volts */
info->m[PSC_POWER] = rsense;
}
if (vrange_nval != vrange_oval) {
/* Set MFR1 CONFIG register bit 1 VRANGE_SELECT */
ret = i2c_smbus_write_word_data(client, LTC4286_MFR_CONFIG1,
vrange_nval);
if (ret < 0)
return dev_err_probe(&client->dev, ret,
"Failed to set vrange\n");
}
info->m[PSC_CURRENT_OUT] = 1024 * rsense;
return pmbus_do_probe(client, info);
}
static const struct of_device_id ltc4286_of_match[] = {
{ .compatible = "lltc,ltc4286" },
{ .compatible = "lltc,ltc4287" },
{}
};
static struct i2c_driver ltc4286_driver = {
.driver = {
.name = "ltc4286",
.of_match_table = ltc4286_of_match,
},
.probe = ltc4286_probe,
.id_table = ltc4286_id,
};
module_i2c_driver(ltc4286_driver);
MODULE_AUTHOR("Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>");
MODULE_DESCRIPTION("PMBUS driver for LTC4286 and compatibles");
MODULE_LICENSE("GPL");
|
