1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
|
// SPDX-License-Identifier: GPL-2.0
/**
* drivers/extcon/extcon-tusb320.c - TUSB320 extcon driver
*
* Copyright (C) 2020 National Instruments Corporation
* Author: Michael Auchter <michael.auchter@ni.com>
*/
#include <linux/extcon-provider.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/regmap.h>
#define TUSB320_REG9 0x9
#define TUSB320_REG9_ATTACHED_STATE_SHIFT 6
#define TUSB320_REG9_ATTACHED_STATE_MASK 0x3
#define TUSB320_REG9_CABLE_DIRECTION BIT(5)
#define TUSB320_REG9_INTERRUPT_STATUS BIT(4)
#define TUSB320_REGA 0xa
#define TUSB320_REGA_I2C_SOFT_RESET BIT(3)
#define TUSB320_REGA_MODE_SELECT_SHIFT 4
#define TUSB320_REGA_MODE_SELECT_MASK 0x3
enum tusb320_attached_state {
TUSB320_ATTACHED_STATE_NONE,
TUSB320_ATTACHED_STATE_DFP,
TUSB320_ATTACHED_STATE_UFP,
TUSB320_ATTACHED_STATE_ACC,
};
enum tusb320_mode {
TUSB320_MODE_PORT,
TUSB320_MODE_UFP,
TUSB320_MODE_DFP,
TUSB320_MODE_DRP,
};
struct tusb320_priv {
struct device *dev;
struct regmap *regmap;
struct extcon_dev *edev;
enum tusb320_attached_state state;
};
static const char * const tusb_attached_states[] = {
[TUSB320_ATTACHED_STATE_NONE] = "not attached",
[TUSB320_ATTACHED_STATE_DFP] = "downstream facing port",
[TUSB320_ATTACHED_STATE_UFP] = "upstream facing port",
[TUSB320_ATTACHED_STATE_ACC] = "accessory",
};
static const unsigned int tusb320_extcon_cable[] = {
EXTCON_USB,
EXTCON_USB_HOST,
EXTCON_NONE,
};
static int tusb320_check_signature(struct tusb320_priv *priv)
{
static const char sig[] = { '\0', 'T', 'U', 'S', 'B', '3', '2', '0' };
unsigned val;
int i, ret;
for (i = 0; i < sizeof(sig); i++) {
ret = regmap_read(priv->regmap, sizeof(sig) - 1 - i, &val);
if (ret < 0)
return ret;
if (val != sig[i]) {
dev_err(priv->dev, "signature mismatch!\n");
return -ENODEV;
}
}
return 0;
}
static int tusb320_set_mode(struct tusb320_priv *priv, enum tusb320_mode mode)
{
int ret;
/* Mode cannot be changed while cable is attached */
if (priv->state != TUSB320_ATTACHED_STATE_NONE)
return -EBUSY;
/* Write mode */
ret = regmap_write_bits(priv->regmap, TUSB320_REGA,
TUSB320_REGA_MODE_SELECT_MASK << TUSB320_REGA_MODE_SELECT_SHIFT,
mode << TUSB320_REGA_MODE_SELECT_SHIFT);
if (ret) {
dev_err(priv->dev, "failed to write mode: %d\n", ret);
return ret;
}
return 0;
}
static int tusb320_reset(struct tusb320_priv *priv)
{
int ret;
/* Set mode to default (follow PORT pin) */
ret = tusb320_set_mode(priv, TUSB320_MODE_PORT);
if (ret && ret != -EBUSY) {
dev_err(priv->dev,
"failed to set mode to PORT: %d\n", ret);
return ret;
}
/* Perform soft reset */
ret = regmap_write_bits(priv->regmap, TUSB320_REGA,
TUSB320_REGA_I2C_SOFT_RESET, 1);
if (ret) {
dev_err(priv->dev,
"failed to write soft reset bit: %d\n", ret);
return ret;
}
/* Wait for chip to go through reset */
msleep(95);
return 0;
}
static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
{
struct tusb320_priv *priv = dev_id;
int state, polarity;
unsigned reg;
if (regmap_read(priv->regmap, TUSB320_REG9, ®)) {
dev_err(priv->dev, "error during i2c read!\n");
return IRQ_NONE;
}
if (!(reg & TUSB320_REG9_INTERRUPT_STATUS))
return IRQ_NONE;
state = (reg >> TUSB320_REG9_ATTACHED_STATE_SHIFT) &
TUSB320_REG9_ATTACHED_STATE_MASK;
polarity = !!(reg & TUSB320_REG9_CABLE_DIRECTION);
dev_dbg(priv->dev, "attached state: %s, polarity: %d\n",
tusb_attached_states[state], polarity);
extcon_set_state(priv->edev, EXTCON_USB,
state == TUSB320_ATTACHED_STATE_UFP);
extcon_set_state(priv->edev, EXTCON_USB_HOST,
state == TUSB320_ATTACHED_STATE_DFP);
extcon_set_property(priv->edev, EXTCON_USB,
EXTCON_PROP_USB_TYPEC_POLARITY,
(union extcon_property_value)polarity);
extcon_set_property(priv->edev, EXTCON_USB_HOST,
EXTCON_PROP_USB_TYPEC_POLARITY,
(union extcon_property_value)polarity);
extcon_sync(priv->edev, EXTCON_USB);
extcon_sync(priv->edev, EXTCON_USB_HOST);
priv->state = state;
regmap_write(priv->regmap, TUSB320_REG9, reg);
return IRQ_HANDLED;
}
static const struct regmap_config tusb320_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
static int tusb320_extcon_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct tusb320_priv *priv;
int ret;
priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->dev = &client->dev;
priv->regmap = devm_regmap_init_i2c(client, &tusb320_regmap_config);
if (IS_ERR(priv->regmap))
return PTR_ERR(priv->regmap);
ret = tusb320_check_signature(priv);
if (ret)
return ret;
priv->edev = devm_extcon_dev_allocate(priv->dev, tusb320_extcon_cable);
if (IS_ERR(priv->edev)) {
dev_err(priv->dev, "failed to allocate extcon device\n");
return PTR_ERR(priv->edev);
}
ret = devm_extcon_dev_register(priv->dev, priv->edev);
if (ret < 0) {
dev_err(priv->dev, "failed to register extcon device\n");
return ret;
}
extcon_set_property_capability(priv->edev, EXTCON_USB,
EXTCON_PROP_USB_TYPEC_POLARITY);
extcon_set_property_capability(priv->edev, EXTCON_USB_HOST,
EXTCON_PROP_USB_TYPEC_POLARITY);
/* update initial state */
tusb320_irq_handler(client->irq, priv);
/* Reset chip to its default state */
ret = tusb320_reset(priv);
if (ret)
dev_warn(priv->dev, "failed to reset chip: %d\n", ret);
else
/*
* State and polarity might change after a reset, so update
* them again and make sure the interrupt status bit is cleared.
*/
tusb320_irq_handler(client->irq, priv);
ret = devm_request_threaded_irq(priv->dev, client->irq, NULL,
tusb320_irq_handler,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
client->name, priv);
return ret;
}
static const struct of_device_id tusb320_extcon_dt_match[] = {
{ .compatible = "ti,tusb320", },
{ }
};
MODULE_DEVICE_TABLE(of, tusb320_extcon_dt_match);
static struct i2c_driver tusb320_extcon_driver = {
.probe = tusb320_extcon_probe,
.driver = {
.name = "extcon-tusb320",
.of_match_table = tusb320_extcon_dt_match,
},
};
static int __init tusb320_init(void)
{
return i2c_add_driver(&tusb320_extcon_driver);
}
subsys_initcall(tusb320_init);
static void __exit tusb320_exit(void)
{
i2c_del_driver(&tusb320_extcon_driver);
}
module_exit(tusb320_exit);
MODULE_AUTHOR("Michael Auchter <michael.auchter@ni.com>");
MODULE_DESCRIPTION("TI TUSB320 extcon driver");
MODULE_LICENSE("GPL v2");
|