1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* pata-cs5535.c - CS5535 PATA for new ATA layer
* (C) 2005-2006 Red Hat Inc
* Alan Cox <alan@lxorguk.ukuu.org.uk>
*
* based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and
* made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de>
* and Alexander Kiausch <alex.kiausch@t-online.de>
*
* Loosely based on the piix & svwks drivers.
*
* Documentation:
* Available from AMD web site.
* TODO
* Review errata to see if serializing is necessary
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <asm/msr.h>
#define DRV_NAME "pata_cs5535"
#define DRV_VERSION "0.2.12"
/*
* The Geode (Aka Athlon GX now) uses an internal MSR based
* bus system for control. Demented but there you go.
*/
#define MSR_ATAC_BASE 0x51300000
#define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0)
#define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01)
#define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02)
#define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03)
#define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04)
#define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05)
#define ATAC_IO_BAR (MSR_ATAC_BASE+0x08)
#define ATAC_RESET (MSR_ATAC_BASE+0x10)
#define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20)
#define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21)
#define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22)
#define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23)
#define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24)
#define ATAC_BM0_CMD_PRIM 0x00
#define ATAC_BM0_STS_PRIM 0x02
#define ATAC_BM0_PRD 0x04
#define CS5535_CABLE_DETECT 0x48
/**
* cs5535_cable_detect - detect cable type
* @ap: Port to detect on
*
* Perform cable detection for ATA66 capable cable. Return a libata
* cable type.
*/
static int cs5535_cable_detect(struct ata_port *ap)
{
u8 cable;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable);
if (cable & 1)
return ATA_CBL_PATA80;
else
return ATA_CBL_PATA40;
}
/**
* cs5535_set_piomode - PIO setup
* @ap: ATA interface
* @adev: device on the interface
*
* Set our PIO requirements. The CS5535 is pretty clean about all this
*/
static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
static const u16 pio_timings[5] = {
0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131
};
static const u16 pio_cmd_timings[5] = {
0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131
};
u32 reg, __maybe_unused dummy;
struct ata_device *pair = ata_dev_pair(adev);
int mode = adev->pio_mode - XFER_PIO_0;
int cmdmode = mode;
/* Command timing has to be for the lowest of the pair of devices */
if (pair) {
int pairmode = pair->pio_mode - XFER_PIO_0;
cmdmode = min(mode, pairmode);
/* Write the other drive timing register if it changed */
if (cmdmode < pairmode)
wrmsr(ATAC_CH0D0_PIO + 2 * pair->devno,
pio_cmd_timings[cmdmode] << 16 | pio_timings[pairmode], 0);
}
/* Write the drive timing register */
wrmsr(ATAC_CH0D0_PIO + 2 * adev->devno,
pio_cmd_timings[cmdmode] << 16 | pio_timings[mode], 0);
/* Set the PIO "format 1" bit in the DMA timing register */
rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg | 0x80000000UL, 0);
}
/**
* cs5535_set_dmamode - DMA timing setup
* @ap: ATA interface
* @adev: Device being configured
*
*/
static void cs5535_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
static const u32 udma_timings[5] = {
0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061
};
static const u32 mwdma_timings[3] = {
0x7F0FFFF3, 0x7F035352, 0x7F024241
};
u32 reg, __maybe_unused dummy;
int mode = adev->dma_mode;
rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
reg &= 0x80000000UL;
if (mode >= XFER_UDMA_0)
reg |= udma_timings[mode - XFER_UDMA_0];
else
reg |= mwdma_timings[mode - XFER_MW_DMA_0];
wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, 0);
}
static const struct scsi_host_template cs5535_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations cs5535_port_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = cs5535_cable_detect,
.set_piomode = cs5535_set_piomode,
.set_dmamode = cs5535_set_dmamode,
};
/**
* cs5535_init_one - Initialise a CS5530
* @dev: PCI device
* @id: Entry in match table
*
* Install a driver for the newly found CS5530 companion chip. Most of
* this is just housekeeping. We have to set the chip up correctly and
* turn off various bits of emulation magic.
*/
static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA4,
.port_ops = &cs5535_port_ops
};
const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
return ata_pci_bmdma_init_one(dev, ppi, &cs5535_sht, NULL, 0);
}
static const struct pci_device_id cs5535[] = {
{ PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), },
{ },
};
static struct pci_driver cs5535_pci_driver = {
.name = DRV_NAME,
.id_table = cs5535,
.probe = cs5535_init_one,
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM_SLEEP
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
#endif
};
module_pci_driver(cs5535_pci_driver);
MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch");
MODULE_DESCRIPTION("low-level driver for the NS/AMD 5535");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, cs5535);
MODULE_VERSION(DRV_VERSION);
|
