1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/dts-v1/;
#include "rk3566-soquartz.dtsi"
/ {
model = "PINE64 RK3566 SOQuartz on Model A carrier board";
compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566";
aliases {
ethernet0 = &gmac1;
};
/* labeled DCIN_12V in schematic */
vcc12v_dcin: vcc12v-dcin-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
vcc5v0_usb: vcc5v0-usb-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
/*
* Labelled VCC3V0_SD in schematic to not conflict with PMIC
* regulator, it's 3.3v in actuality
*/
vcc3v0_sd: vcc3v0-sd-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc3v0_sd";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc3v3_sys>;
};
vcc3v3_pcie: vcc3v3-pcie-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_pcie";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc12v_dcin>;
};
vcc12v_pcie: vcc12v-pcie-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc12v_pcie";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
vin-supply = <&vcc12v_dcin>;
};
};
/* phy for pcie */
&combphy2 {
phy-supply = <&vcc3v3_sys>;
status = "okay";
};
&gmac1 {
status = "okay";
};
/*
* i2c1 is exposed on CM1 / Module1A
* pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu
* pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu
*/
&i2c1 {
status = "okay";
/*
* the rtc interrupt is tied to PMIC_PWRON,
* it will force reset the board if triggered.
*/
pcf85063: rtc@51 {
compatible = "nxp,pcf85063";
reg = <0x51>;
};
};
/*
* i2c2 is exposed on CM1 / Module1A - to PI40
* pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
* pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3
*/
&i2c2 {
status = "disabled";
};
/*
* i2c3 is exposed on CM1 / Module1A - to PI40
* pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3
* pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
*/
&i2c3 {
status = "disabled";
};
/*
* i2c4 is exposed on CM2 / Module1B - to PI40
* pin 45 - GPIO24 - i2c4_scl_m1
* pin 47 - GPIO23 - i2c4_sda_m1
*/
&i2c4 {
status = "disabled";
};
/*
* i2s1_8ch is exposed on CM1 / Module1A - to PI40
* pin 24 - GPIO26 - i2s1_sdi1_m1
* pin 25 - GPIO21 - i2s1_sdo0_m1
* pin 26 - GPIO19 - i2s1_lrck_tx_m1
* pin 27 - GPIO20 - i2s1_sdi0_m1
* pin 29 - GPIO16 - i2s1_sdi3_m1
* pin 30 - GPIO6 - i2s1_sdi2_m1
* pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3
* pin 41 - GPIO25 - i2s1_sdo2_m1
* pin 49 - GPIO18 - i2s1_sclk_tx_m1
* pin 50 - GPIO17 - i2s1_mclk_m1
* pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2
*/
&i2s1_8ch {
status = "disabled";
};
&led_diy {
status = "okay";
};
&led_work {
status = "okay";
};
&pcie2x1 {
vpcie3v3-supply = <&vcc3v3_pcie>;
status = "okay";
};
&rgmii_phy1 {
status = "okay";
};
&rgmii_phy1 {
status = "okay";
};
/*
* saradc is exposed on CM1 / Module1A - to J2
* pin 94 - AIN1 - saradc_vin3
* pin 96 - AIN0 - saradc_vin2
*/
&saradc {
status = "disabled";
};
/*
* vmmc-supply is vcc3v3_sd on v1.0 and vcc3v0_sd on v1.1+
* the soquartz SoM has SDMMC_PWR (CM1 pin 75) hardwired to vcc3v3_sys,
* so we use vcc3v3_sd here to ensure the regulator is enabled on older boards.
*/
&sdmmc0 {
vmmc-supply = <&vcc3v3_sd>;
status = "okay";
};
/*
* spi3 is exposed on CM1 / Module1A - to PI40
* pin 37 - GPIO7 - spi3_cs1_m0
* pin 38 - GPIO11 - spi3_clk_m0
* pin 39 - GPIO8 - spi3_cs0_m0
* pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch
* pin 44 - GPIO10 - spi3_mosi_m0
*/
&spi3 {
status = "disabled";
};
/*
* uart2 is exposed on CM1 / Module1A - to PI40
* pin 51 - GPIO15 - uart2_rx_m0
* pin 55 - GPIO14 - uart2_tx_m0
*/
&uart2 {
status = "okay";
};
/*
* uart7 is exposed on CM1 / Module1A - to PI40
* pin 46 - GPIO22 - uart7_tx_m2
* pin 47 - GPIO23 - uart7_rx_m2
*/
&uart7 {
status = "okay";
};
&usb2phy0 {
status = "okay";
};
&usb2phy0_otg {
phy-supply = <&vcc5v0_usb>;
status = "okay";
};
&usb_host0_xhci {
status = "okay";
};
&vbus {
vin-supply = <&vcc5v0_usb>;
};
&vcc3v3_sd {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
status = "okay";
};
|
