1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2023 Gateworks Corporation
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
led-controller {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led-0 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led-1 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio4 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
pcie0_refclk: clock-pcie0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
};
pps {
compatible = "pps-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pps>;
gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
reg_usb2_vbus: regulator-usb2-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usb2_en>;
regulator-name = "usb2_vbus";
gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
regulator-name = "SD2_3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
/* off-board header */
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
status = "okay";
};
&gpio1 {
gpio-line-names =
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "gpioa", "gpiob", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "";
};
&gpio4 {
gpio-line-names =
"", "", "", "pci_usb_sel",
"", "", "", "pci_wdis#",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "";
};
&gpio5 {
gpio-line-names =
"", "", "", "",
"gpioc", "gpiod", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "";
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
eeprom@52 {
compatible = "atmel,24c32";
reg = <0x52>;
pagesize = <32>;
};
};
/* off-board header */
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
};
&pcie_phy {
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
fsl,clkreq-unsupported;
clocks = <&pcie0_refclk>;
clock-names = "ref";
status = "okay";
};
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie0>;
reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
/* GPS */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
/* USB1 - Type C front panel SINK port J14 */
&usbotg1 {
dr_mode = "peripheral";
status = "okay";
};
/* USB2 4-port USB3.0 HUB:
* P1 - USBC connector (host only)
* P2 - USB2 test connector
* P3 - miniPCIe full card
* P4 - miniPCIe half card
*/
&usbotg2 {
dr_mode = "host";
vbus-supply = <®_usb2_vbus>;
status = "okay";
};
/* microSD */
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_usdhc2_vmmc>;
bus-width = <4>;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000040 /* GPIOA */
MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x40000040 /* GPIOB */
MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x40000106 /* PCI_USBSEL */
MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000106 /* PCIE_WDIS# */
MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x40000040 /* GPIOD */
MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000040 /* GPIOC */
>;
};
pinctrl_gpio_leds: gpioledgrp {
fsl,pins = <
MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x6 /* LEDG */
MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x6 /* LEDR */
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c2
MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c2
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c2
MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c2
>;
};
pinctrl_pcie0: pciegrp {
fsl,pins = <
MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x106
>;
};
pinctrl_pps: ppsgrp {
fsl,pins = <
MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x106
>;
};
pinctrl_reg_usb2_en: regusb2grp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x6 /* USBHUB_RST# (ext p/u) */
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x40
>;
};
pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x140
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x140
MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x140
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x140
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc0
>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc0
>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc0
>;
};
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4
>;
};
};
|
