blob: f420499f300ac29c156327d60952a81c5b4e4836 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Google Veyron Pinky Rev 2 board device tree source
*
* Copyright 2015 Google, Inc
*/
/dts-v1/;
#include "rk3288-veyron-chromebook.dtsi"
#include "cros-ec-sbs.dtsi"
/ {
model = "Google Pinky";
compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
"google,veyron", "rockchip,rk3288";
/delete-node/backlight-regulator;
/delete-node/panel-regulator;
/delete-node/emmc-pwrseq;
/delete-node/vcc18-lcd;
};
&backlight {
/delete-property/power-supply;
};
&emmc {
/*
* Use a pullup instead of a drive since the output is 3.3V and
* really should be 1.8V (oops). The external pulldown will help
* bring the voltage down if we only drive with a pullup here.
* Therefore disable the powerseq (and actual reset) for pinky.
*/
/delete-property/mmc-pwrseq;
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_reset>;
};
&edp {
/delete-property/pinctrl-names;
/delete-property/pinctrl-0;
force-hpd;
};
&lid_switch {
pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
};
};
/* Touchpad connector */
&i2c3 {
status = "okay";
clock-frequency = <400000>;
i2c-scl-falling-time-ns = <50>;
i2c-scl-rising-time-ns = <300>;
};
&panel {
power-supply = <&vcc33_lcd>;
};
&pinctrl {
/delete-node/ lcd;
backlight {
/delete-node/ bl_pwr_en;
};
buttons {
pwr_key_h: pwr-key-h {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
emmc {
emmc_reset: emmc-reset {
rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
sdmmc {
sdmmc_wp_gpio: sdmmc-wp-gpio {
rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&rk808 {
regulators {
vcc18_lcd: SWITCH_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc18_lcd";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
&sdmmc {
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
&sdmmc_wp_gpio &sdmmc_bus4>;
wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>;
};
&tsadc {
/* Some connection is flaky making the tsadc hang the system */
status = "disabled";
};
|
