1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
|
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Device Tree include file for SolidRun Clearfog 88F6828 based boards
*
* Copyright (C) 2015 Russell King
*/
#include "armada-388.dtsi"
#include "armada-38x-solidrun-microsom.dtsi"
/ {
aliases {
/* So that mvebu u-boot can update the MAC addresses */
ethernet1 = ð0;
ethernet2 = ð1;
ethernet3 = ð2;
};
chosen {
stdout-path = "serial0:115200n8";
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
soc {
internal-regs {
sata@a8000 {
/* pinctrl? */
status = "okay";
};
sata@e0000 {
/* pinctrl? */
status = "okay";
};
sdhci@d8000 {
bus-width = <4>;
cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
no-1-8-v;
pinctrl-0 = <µsom_sdhci_pins
&clearfog_sdhci_cd_pins>;
pinctrl-names = "default";
status = "okay";
vmmc-supply = <®_3p3v>;
wp-inverted;
};
usb@58000 {
/* CON3, nearest power. */
status = "okay";
};
usb3@f8000 {
/* CON7 */
status = "okay";
};
};
pcie {
status = "okay";
/*
* The two PCIe units are accessible through
* the mini-PCIe connectors on the board.
*/
pcie@2,0 {
/* Port 1, Lane 0. CON3, nearest power. */
reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
status = "okay";
};
};
};
sfp: sfp {
compatible = "sff,sfp";
i2c-bus = <&i2c1>;
los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <2000>;
};
};
ð1 {
/* ethernet@30000 */
bm,pool-long = <2>;
bm,pool-short = <1>;
buffer-manager = <&bm>;
phys = <&comphy1 1>;
phy-mode = "sgmii";
status = "okay";
};
ð2 {
/* ethernet@34000 */
bm,pool-long = <3>;
bm,pool-short = <1>;
buffer-manager = <&bm>;
managed = "in-band-status";
phys = <&comphy5 2>;
phy-mode = "sgmii";
sfp = <&sfp>;
status = "okay";
};
&i2c0 {
/*
* PCA9655 GPIO expander, up to 1MHz clock.
* 0-CON3 CLKREQ#
* 1-CON3 PERST#
* 2-
* 3-CON3 W_DISABLE
* 4-
* 5-USB3 overcurrent
* 6-USB3 power
* 7-
* 8-JP4 P1
* 9-JP4 P4
* 10-JP4 P5
* 11-m.2 DEVSLP
* 12-SFP_LOS
* 13-SFP_TX_FAULT
* 14-SFP_TX_DISABLE
* 15-SFP_MOD_DEF0
*/
expander0: gpio-expander@20 {
/*
* This is how it should be:
* compatible = "onnn,pca9655", "nxp,pca9555";
* but you can't do this because of the way I2C works.
*/
compatible = "nxp,pca9555";
gpio-controller;
#gpio-cells = <2>;
reg = <0x20>;
pcie1_0_clkreq {
gpio-hog;
gpios = <0 GPIO_ACTIVE_LOW>;
input;
line-name = "pcie1.0-clkreq";
};
pcie1_0_w_disable {
gpio-hog;
gpios = <3 GPIO_ACTIVE_LOW>;
output-low;
line-name = "pcie1.0-w-disable";
};
usb3_ilimit {
gpio-hog;
gpios = <5 GPIO_ACTIVE_LOW>;
input;
line-name = "usb3-current-limit";
};
usb3_power {
gpio-hog;
gpios = <6 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "usb3-power";
};
m2_devslp {
gpio-hog;
gpios = <11 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "m.2 devslp";
};
};
/* The MCP3021 supports standard and fast modes */
mikrobus_adc: mcp3021@4c {
compatible = "microchip,mcp3021";
reg = <0x4c>;
};
eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
pagesize = <16>;
};
};
&i2c1 {
/*
* Routed to SFP, mikrobus, and PCIe.
* SFP limits this to 100kHz, and requires an AT24C01A/02/04 with
* address pins tied low, which takes addresses 0x50 and 0x51.
* Mikrobus doesn't specify beyond an I2C bus being present.
* PCIe uses ARP to assign addresses, or 0x63-0x64.
*/
clock-frequency = <100000>;
pinctrl-0 = <&clearfog_i2c1_pins>;
pinctrl-names = "default";
status = "okay";
};
&pinctrl {
clearfog_i2c1_pins: i2c1-pins {
/* SFP, PCIe, mSATA, mikrobus */
marvell,pins = "mpp26", "mpp27";
marvell,function = "i2c1";
};
clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
marvell,pins = "mpp20";
marvell,function = "gpio";
};
mikro_pins: mikro-pins {
/* int: mpp22 rst: mpp29 */
marvell,pins = "mpp22", "mpp29";
marvell,function = "gpio";
};
mikro_spi_pins: mikro-spi-pins {
marvell,pins = "mpp43";
marvell,function = "spi1";
};
mikro_uart_pins: mikro-uart-pins {
marvell,pins = "mpp24", "mpp25";
marvell,function = "ua1";
};
};
&spi1 {
/*
* Add SPI CS pins for clearfog:
* CS0: W25Q32
* CS1: PIC microcontroller (Pro models)
* CS2: mikrobus
*/
pinctrl-0 = <&spi1_pins &mikro_spi_pins>;
pinctrl-names = "default";
status = "okay";
};
&uart1 {
/* mikrobus uart */
pinctrl-0 = <&mikro_uart_pins>;
pinctrl-names = "default";
status = "okay";
};
|
