1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Marvell Armada 375 evaluation board
* (DB-88F6720)
*
* Copyright (C) 2014 Marvell
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "armada-375.dtsi"
/ {
model = "Marvell Armada 375 Development Board";
compatible = "marvell,a375-db", "marvell,armada375";
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x00000000 0x40000000>; /* 1 GB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
};
};
&pciec {
status = "okay";
};
/*
* The two PCIe units are accessible through
* standard PCIe slots on the board.
*/
&pcie0 {
/* Port 0, Lane 0 */
status = "okay";
};
&pcie1 {
/* Port 1, Lane 0 */
status = "okay";
};
&spi0 {
pinctrl-0 = <&spi0_pins>;
pinctrl-names = "default";
/*
* SPI conflicts with NAND, so we disable it here, and
* select NAND as the enabled device by default.
*/
status = "disabled";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a13", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
};
&i2c0 {
status = "okay";
clock-frequency = <100000>;
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
};
&i2c1 {
status = "okay";
clock-frequency = <100000>;
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
};
&uart0 {
status = "okay";
};
&pinctrl {
sdio_st_pins: sdio-st-pins {
marvell,pins = "mpp44", "mpp45";
marvell,function = "gpio";
};
};
&sata {
status = "okay";
nr-ports = <2>;
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
num-cs = <1>;
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
partition@0 {
label = "U-Boot";
reg = <0 0x800000>;
};
partition@800000 {
label = "Linux";
reg = <0x800000 0x800000>;
};
partition@1000000 {
label = "Filesystem";
reg = <0x1000000 0x3f000000>;
};
};
&usb1 {
status = "okay";
};
&usb2 {
status = "okay";
};
&sdio {
pinctrl-0 = <&sdio_pins &sdio_st_pins>;
pinctrl-names = "default";
status = "okay";
cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
&mdio {
phy0: ethernet-phy@0 {
reg = <0>;
};
phy3: ethernet-phy@3 {
reg = <3>;
};
};
ðernet {
status = "okay";
};
ð0 {
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
ð1 {
status = "okay";
phy = <&phy3>;
phy-mode = "gmii";
};
|
