1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
|
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/dwc2.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: DesignWare HS OTG USB 2.0 controller Bindings
maintainers:
- Rob Herring <robh@kernel.org>
properties:
compatible:
oneOf:
- const: brcm,bcm2835-usb
- const: hisilicon,hi6220-usb
- items:
- const: rockchip,rk3066-usb
- const: snps,dwc2
- items:
- enum:
- rockchip,px30-usb
- rockchip,rk3036-usb
- rockchip,rk3188-usb
- rockchip,rk3228-usb
- rockchip,rk3288-usb
- rockchip,rk3328-usb
- rockchip,rk3368-usb
- rockchip,rv1108-usb
- const: rockchip,rk3066-usb
- const: snps,dwc2
- const: lantiq,arx100-usb
- const: lantiq,xrx200-usb
- items:
- enum:
- amlogic,meson8-usb
- amlogic,meson8b-usb
- amlogic,meson-gxbb-usb
- amlogic,meson-g12a-usb
- const: snps,dwc2
- const: amcc,dwc-otg
- const: snps,dwc2
- const: st,stm32f4x9-fsotg
- const: st,stm32f4x9-hsotg
- const: st,stm32f7-hsotg
- const: st,stm32mp15-fsotg
- items:
- const: st,stm32mp15-hsotg
- const: snps,dwc2
- const: samsung,s3c6400-hsotg
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
maxItems: 1
clock-names:
items:
- const: otg
resets:
items:
- description: common reset
- description: ecc reset
minItems: 1
reset-names:
items:
- const: dwc2
- const: dwc2-ecc
minItems: 1
phys:
maxItems: 1
phy-names:
const: usb2-phy
power-domains:
maxItems: 1
vbus-supply:
description: reference to the VBUS regulator. Depending on the current mode
this is enabled (in "host" mode") or disabled (in "peripheral" mode). The
regulator is updated if the controller is configured in "otg" mode and the
status changes between "host" and "peripheral".
vusb_d-supply:
description: phandle to voltage regulator of digital section,
vusb_a-supply:
description: phandle to voltage regulator of analog section.
usb33d-supply:
description: reference to the VBUS and ID sensing comparators supply, in
order to perform OTG operation, used on STM32MP15 SoCs.
dr_mode:
enum: [host, peripheral, otg]
g-rx-fifo-size:
$ref: /schemas/types.yaml#/definitions/uint32
description: size of rx fifo size in gadget mode.
g-np-tx-fifo-size:
$ref: /schemas/types.yaml#/definitions/uint32
description: size of non-periodic tx fifo size in gadget mode.
g-tx-fifo-size:
$ref: /schemas/types.yaml#/definitions/uint32-array
description: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
snps,need-phy-for-wake:
$ref: /schemas/types.yaml#/definitions/flag
description: If present indicates that the phy needs to be left on for
remote wakeup during suspend.
snps,reset-phy-on-wake:
$ref: /schemas/types.yaml#/definitions/flag
description: If present indicates that we need to reset the PHY when we
detect a wakeup. This is due to a hardware errata.
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
additionalProperties: false
examples:
- |
usb@101c0000 {
compatible = "rockchip,rk3066-usb", "snps,dwc2";
reg = <0x10180000 0x40000>;
interrupts = <18>;
clocks = <&usb_otg_ahb_clk>;
clock-names = "otg";
phys = <&usbphy>;
phy-names = "usb2-phy";
};
...
|
