1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/thermal/qcom-spmi-adc-tm5.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm's SPMI PMIC ADC Thermal Monitoring
maintainers:
- Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
properties:
compatible:
const: qcom,spmi-adc-tm5
reg:
maxItems: 1
interrupts:
maxItems: 1
"#thermal-sensor-cells":
const: 1
description:
Number of cells required to uniquely identify the thermal sensors. Since
we have multiple sensors this is set to 1
"#address-cells":
const: 1
"#size-cells":
const: 0
qcom,avg-samples:
$ref: /schemas/types.yaml#/definitions/uint32
description: Number of samples to be used for measurement.
enum:
- 1
- 2
- 4
- 8
- 16
default: 1
qcom,decimation:
$ref: /schemas/types.yaml#/definitions/uint32
description: This parameter is used to decrease ADC sampling rate.
Quicker measurements can be made by reducing decimation ratio.
enum:
- 250
- 420
- 840
default: 840
patternProperties:
"^([-a-z0-9]*)@[0-7]$":
type: object
description:
Represent one thermal sensor.
properties:
reg:
$ref: /schemas/types.yaml#/definitions/uint32
description: Specify the sensor channel. There are 8 channels in PMIC5's ADC TM
minimum: 0
maximum: 7
io-channels:
description:
From common IIO binding. Used to pipe PMIC ADC channel to thermal monitor
qcom,ratiometric:
$ref: /schemas/types.yaml#/definitions/flag
description:
Channel calibration type.
If this property is specified VADC will use the VDD reference
(1.875V) and GND for channel calibration. If property is not found,
channel will be calibrated with 0V and 1.25V reference channels,
also known as absolute calibration.
qcom,hw-settle-time-us:
$ref: /schemas/types.yaml#/definitions/uint32
description: Time between AMUX getting configured and the ADC starting conversion.
enum: [15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, 8000, 16000, 32000, 64000, 128000]
qcom,pre-scaling:
$ref: /schemas/types.yaml#/definitions/uint32-array
description: Used for scaling the channel input signal before the
signal is fed to VADC. The configuration for this node is to know the
pre-determined ratio and use it for post scaling. It is a pair of
integers, denoting the numerator and denominator of the fraction by
which input signal is multiplied. For example, <1 3> indicates the
signal is scaled down to 1/3 of its value before ADC measurement. If
property is not found default value depending on chip will be used.
items:
- const: 1
- enum: [ 1, 3, 4, 6, 20, 8, 10 ]
required:
- reg
- io-channels
additionalProperties:
false
required:
- compatible
- reg
- interrupts
- "#address-cells"
- "#size-cells"
- "#thermal-sensor-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/interrupt-controller/irq.h>
spmi_bus {
#address-cells = <1>;
#size-cells = <0>;
pm8150b_adc: adc@3100 {
reg = <0x3100>;
compatible = "qcom,spmi-adc5";
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
/* Other propreties are omitted */
conn-therm@4f {
reg = <ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
};
pm8150b_adc_tm: adc-tm@3500 {
compatible = "qcom,spmi-adc-tm5";
reg = <0x3500>;
interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
#thermal-sensor-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
conn-therm@0 {
reg = <0>;
io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
};
...
|