blob: 52db562f17a422df5d7db5cc5a3ece060009a657 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
|
SPI-GPIO devicetree bindings
This represents a group of 3-n GPIO lines used for bit-banged SPI on dedicated
GPIO lines.
Required properties:
- compatible: should be set to "spi-gpio"
- #address-cells: should be set to <0x1>
- ranges
- sck-gpios: GPIO spec for the SCK line to use
- miso-gpios: GPIO spec for the MISO line to use
- mosi-gpios: GPIO spec for the MOSI line to use
- cs-gpios: GPIOs to use for chipselect lines.
Not needed if num-chipselects = <0>.
- num-chipselects: Number of chipselect lines. Should be <0> if a single device
with no chip select is connected.
Deprecated bindings:
These legacy GPIO line bindings can alternatively be used to define the
GPIO lines used, they should not be used in new device trees.
- gpio-sck: GPIO spec for the SCK line to use
- gpio-miso: GPIO spec for the MISO line to use
- gpio-mosi: GPIO spec for the MOSI line to use
Example:
spi {
compatible = "spi-gpio";
#address-cells = <0x1>;
ranges;
sck-gpios = <&gpio 95 0>;
miso-gpios = <&gpio 98 0>;
mosi-gpios = <&gpio 97 0>;
cs-gpios = <&gpio 125 0>;
num-chipselects = <1>;
/* clients */
};
|
